* printcmd.c (print_scalar_formatted): Always truncate
unsigned data types.
* cli-dump.c (struct callback_data): Change type of load_offset
to CORE_ADDR.
(restore_binary_file): Update type casts.
(restore_command): Parse load_offset as address, not long.
* utils.c (string_to_core_addr): Do not sign-extend value.
* varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
before comparing against requested frame address.
testsuite/ChangeLog:
* gdb.base/dump.exp: Handle SPU like 64-bit platforms.
Remove the PROT parameter from openp.
* source.c (openp): Remove the parameter PROT. Assertion check MODE.
defs.h (openp): Update the prototype.
Update all the openp callers.
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* cli/cli-decode.c (deprecated_add_set_cmd): Delete.
* command.h (deprecated_add_set_cmd): Delete declaration.
* gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
'set debug gnu-nat' and 'show debug gnu-nat'.
* i386-nat.c (_initialize_i386_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
* mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
gdb/doc/
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo: Document 'set/show debug gnu-nat'. Replace 'maint
show-debug-regs' docs by 'maint set show-debug-regs' and 'maint
show show-debug-regs' docs.
target_has_stack.
* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
when there is no thread selected.
(mi_cmd_execute): Don't special case commands that can run without
a valid selected thread.
* top.c (execute_command): Don't special case commands that can
run without a valid selected thread. Use has_stack_frames.
* infcmd.c (ensure_valid_thread): New.
(continue_1, step_1, jump_command, signal_command): Use it.
(detach_command): Error out if there's no selected thread/inferior.
* thread.c (print_thread_info): Allow having no thread selected.
(switch_to_thread): Don't read the PC if there is no current thread.
(do_restore_current_thread_cleanup): Don't record the current
frame if there is no current thread.
(make_cleanup_restore_current_thread): Don't read frame info if
there is no selected thread.
(_initialize_thread): Don't mark commands as
"no_selected_thread_ok".
* frame.c (get_current_frame): Error out if there is no valid
selected thread.
(has_stack_frames): Return false if there is no valid
selected thread.
* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
"no_selected_thread_ok".
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): Delete.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Delete declaration.
* stack.c (get_selected_block): Use has_stack_frames.
Silence a few -Wmissing-prototypes warnings.
PR build/9877:
* amd64-nat.c: Include "amd64-nat.h".
* fork-child.c (_initialize_fork_child): Ditto.
* gcore.c (_initialize_gcore): Ditto.
* inf-ptrace.c: Include "inf-ptrace.h".
(inf_ptrace_store_registers): Make it static.
* linux-nat.c (linux_nat_terminal_ours): Make it static.
(_initialize_linux_nat): Declare before definition.
* linux-tdep.c: Include "linux-tdep.h".
* linux-thread-db.c (_initialize_thread_db): Declare before
definition.
* proc-service.c (_initialize_proc_service): Ditto.
* remote.c (remote_send_printf): Make it static.
* solib.c: Include "solib.h".
* symfile-mem.c (_initialize_symfile_mem): Declare before
definition.
* ada-lang.c (ada_la_decode, ada_match_name)
(ada_suppress_symbol_printing, ada_is_array_type)
(ada_value_ptr_subscript, ada_array_length)
(ada_to_static_fixed_value): Make them static.
(_initialize_ada_language): Declare before definition.
* ada-tasks.c (ada_get_task_number, ada_get_environment_task)
(ada_task_list_changed, ada_new_objfile_observer): Make them
static.
(_initialize_tasks): Declare before definition.
* addrmap.c (_initialize_addrmap): Declare before definition.
* auxv.c (default_auxv_parse): Make it static.
* bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
them static.
* breakpoint.c (remove_sal): Add line break.
(expand_line_sal_maybe): Make it static.
* cp-name-parser.y: Include "cp-support.h".
* cp-valprint.c (cp_find_class_member): Make it static.
* eval.c (value_f90_subarray): Ditto.
* exceptions.c (print_any_exception): Ditto.
* findcmd.c (_initialize_mem_search): Declare before definition.
* frame.c (frame_observer_target_changed): Make it static.
* gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
* inf-child.c: Include "inf-child.h".
* inferior.h (valid_inferior_id): Rename to ...
(valid_gdb_inferior_id): ... this.
* infrun.c (infrun_thread_stop_requested, siginfo_make_value):
Make them static.
* jv-lang.c (java_language_arch_info): Make it static.
* m2-typeprint.c (m2_get_discrete_bounds): Ditto.
* osdata.c (info_osdata_command): Make it static.
* regcache.c (regcache_observer_target_changed): Make it static.
* reverse.c (_initialize_reverse): Declare before definition.
* stabsread.c (cleanup_undefined_types_noname)
(cleanup_undefined_types_1): Make them static.
* symfile.c (place_section): Make it static.
* symtab.c (find_pc_sect_psymtab_closer): Make it static.
* target-descriptions.c (_initialize_target_descriptions): Declare
before definition.
* target.c (default_get_ada_task_ptid, find_default_can_async_p)
(find_default_is_async_p, find_default_supports_non_stop): Make
them static.
(target_supports_non_stop): Add prototype.
(dummy_pid_to_str): Make it static.
* utils.c (_initialize_utils): Declare before definition.
* ada-exp.y (_initialize_ada_exp): Declare before definition.
* solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
* target.h (struct target_ops): Add a prototype to the
to_can_execute_reverse callback.
* macroscope.c (_initialize_macroscope): Declare before definition.
* cp-namespace.c (_initialize_cp_namespace): Declare before definition.
* python/python.c (_initialize_python): Declare before definition.
* tui/tui-command.c: Include "tui/tui-command.h".
* tui/tui-data.c (init_content_element, init_win_info): Make them
static.
* tui/tui-disasm.c: Include "tui/tui-disasm.h".
* tui/tui-interp.c (_initialize_tui_interp): Declare before
definition.
* tui/tui-layout.c: Include "tui/tui-layout.h".
(_initialize_tui_layout): Declare before definition.
* tui/tui-regs.c: Include "tui/tui-regs.h".
(tui_display_reg_element_at_line): Make it static.
(_initialize_tui_regs): Declare before definition.
* tui/tui-stack.c (_initialize_tui_stack): Declare before
definition.
* tui/tui-win.c: Include "tui/tui-win.h".
(_initialize_tui_win): Declare before definition.
(tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
* tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
(tui_get_cmd_list): Add a prototype.
* tui/tui-windata.c: Include tui-windata.h.
* tui/tui-wingeneral.c (box_win): Make it static.
* cli/cli-logging.c (show_logging_command): Make it static.
(_initialize_cli_logging): Declare before definition.
* mi/mi-common.c (_initialize_gdb_mi_common): Declare before
definition.
* cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
* cli/cli-setshow.c (do_setshow_command): Handle it.
* command.h (enum var_types): Add var_zuinteger.
(add_setshow_zuinteger_cmd): Declare.
* valprint.c (_initialize_valprint): Change the set input-radix
and set output-radix commands to zuinteger type.
2009-01-23 Pedro Alves <pedro@codesourcery.com>
* gdb.base/radix.exp: Add tests to ensure that that set
input-radix 0 and set output-radix 0 are really rejected.
attribute in GLIBC 2.8.
* cli/cli-cmds.c (pwd_command): Check return value from getcwd.
* inflow.c (check_syscall): New function.
(new_tty): Use check_syscall to check return values from open and dup.
* linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
* main.c (captured_main): Call cwd after setting up gdb_stderr;
check for errors from getcwd.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
* ui-file.c (stdio_file_write): Ignore return value from fwrite.
(stdio_file_fputs): Same.
* utils.c (internal_vproblem): abort if last-ditch error message
write fails.
PR cli/2563:
* cli/cli-decode.c (delete_cmd): Add hook-related out parameters.
(add_cmd): Update. Install hooks into new command.
(add_alias_cmd): Update.
gdb/testsuite
* gdb.base/commands.exp (redefine_hook_test): New proc.
Call it.
PR gdb/1815:
* cli/cli-decode.c (delete_cmd): Forward declare.
(delete_cmd): Now static. Change return type. Remove command
from alias chain. Rewrite.
(add_cmd): Initialize new fields. Update cmd_pointer on all
aliases.
(add_alias_cmd): Put command on alias chain.
* command.h (delete_cmd): Don't declare.
* cli/cli-decode.h (delete_cmd): Don't declare.
(struct cmd_list_element) <aliases, alias_chain>: New fields.
gdb/testsuite
* gdb.base/commands.exp (redefine_backtrace_test): New proc.
Call it.
* reggroups.c (maintenance_print_reggroups): Make a cleanup.
* regcache.c (regcache_print): Make a cleanup.
* maint.c (maintenance_print_architecture): Make a cleanup.
* dummy-frame.c (maintenance_print_dummy_frames): Make a cleanup.
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
(set_cmd_async_ok, get_cmd_async_ok): Declare.
* cli/cli-decode.c (set_cmd_async_ok): New function.
(get_cmd_async_ok): New function.
* cli/cli-cmds.c (init_cli_cmds): Mark "pwd", "help", "info", and
"show" as async-ok.
* top.c (execute_command): Use get_cmd_async_ok.
* infcmd.c: Include cli/cli-decode.h.
(_initialize_infcmd): Mark "interrupt" as async-ok.
* Makefile.in (infcmd.o): Depend on cli_decode_h.
* gdb/target.c (target_flash_erase): Do not return void value.
(target_flash_done): Likewise.
* gdb/cli/cli-cmds.c (source_command): Likewise.
Reported by timeless@gmail.com:
* wrapper.c (sim_target_parse_arg_array): Do not return void value.
(build_command_line): Require arguments only for if and while commands.
(get_command_line, execute_user_command, execute_control_command):
Fix wording of warning messages.
(print_command_lines): Print breakpoint commands.
(execute_control_command): Call commands_from_control_command to
handle the `commands' command inside a body of a flow-control command.
(read_next_line): Recognize the `commands' command and build a
command line structure for it.
(recurse_read_control_structure, read_command_lines): Handle
`commands' similarly to `if' and `while'.
* breakpoint.c (get_number_trailer): Document the special meaning
of NULL as the first argument PP.
(commands_from_control_command): New function.
* breakpoint.h (commands_from_control_command): Add prototype.
* defs.h (commands_control): New enumerated value for enum
command_control_type.
