* configure: Regenerate.
From: Robert Lipe <robertl@dgii.com>
Add support for SCO OpenServer 5 (a.k.a. 3.2v5*) This
target is an SVR3.2 with COFF, ELF, and shared libes, but
no /proc.
* config/i386/i386sco5.mh: New file.
* config/i386/nm-i386sco5.h: New file.
* config.in: Regenerate with autoheader.
* configure: Regenerate with autoconf.
* inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL
if it is actually defined.
(gdb_setpgid): Use HAVE_SETPGID.
* ch-exp.c: Change include of <string.h> to "gdb_string.h".
* c-exp.y: Ditto.
* f-exp.y: Ditto.
* m2-exp.y: Ditto.
* c-exp.y: Include <ctype.h>.
* serial.c: Ditto.
* config/m68k/nm-news.h: Add typedef for pid_t which is
apparently missing from <sys/types.h>. Enclose entire
file in NM_NEWS_H ifndef and define when included.
* config/mips/nm-news-mips.h: Ditto.
* config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL,
REGISTER_CONVERT_TO_RAW): Change name of temporary variable.
* monitor.c (monitor_debug): Change remotedebug to buffer strings.
* monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before
epecting prompt and echo during open.
* monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to
determine if break should be sent as stop command.
* monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN.
* i960-tdep.c (mon960_frame_chain_valid): New function for getting
stack frame on mon960.
* Makefile.in: Add mon960 files.
* configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960;
added i960-nindy-coff* and i960-nindy-elf* for target nindy.
* configure: Regenerated.
* config/i960/mon960.mt, config/i960/tm-mon960.h: New files;
support mon960 rom monitor on i960.
* sh-tdep.c (set processor): New command to set specific
processor type.
(sh_reg_names, sh3_reg_names): Arrays of register names for
SH and SH3 processors.
(sh_set_processor_type): New function.
* sh3-rom.c (sh3_open): Call it.
(sh3_regname): Add names of all the bank registers.
(sh3_supply_register): Clean up formatting.
* config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include
bank registers.
(REGISTER_NAMES): Add names of bank registers.
(FP15_REGNUM): Define.
(REGISTER_VIRTUAL_TYPE): Use it.
* monitor.c: Clean up some comments.
* config/xm-nbsd.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG):
#ifdef'd out definitions --- Causes serious gdb failures on
the i386. Need to investigate further before enabling.
* i386b-nat.c (fetch_inferior_registers, store_inferior_registers,
fetch_core_registers): New functions. These functions are defined
if FETCH_INFERIOR_REGISTERS is set. Registers are fetched/stored
with ptrace PT_GETREGS/PT_SETREGS.
here from config/i386/xm-i386mach.h, fix name.
* config/i386/nm-sun386.h: Ditto, from config/i386/xm-sun386.h.
* config/i386/nm-ptx4.h (CHILD_PREPARE_TO_STORE): Move to
here from config/i386/xm-ptx4.h.
* config/i386/nm-ptx4.h: Ditto, from config/i386/xm-ptx.h.
* config/i386/nm-symmetry.h: Ditto, from config/i386/xm-symmetry.h.
* config/m68k/nm-sun3.h: Ditto, from config/m68k/xm-sun3.h.
more housekeeping
* config/sparc/nm-nbsd.h (CHILD_PREPARE_TO_STORE): Move to here
from config/sparc/xm-nbsd.h.
* config/sparc/nm-sun4os4 (CHILD_PREPARE_TO_STORE): Ditto, from
config/sparc/xm-sparc.h.
* config/sparc/nm-sun4sol2.h: New file, renamed from nm-sysv4.h.
(PRSVADDR_BROKEN): Move here from xm-sun4sol2.h.
* config/sparc/sun4sol2.mh (NAT_FILE): Update.
* config/sparc/xm-sun4os4.h (HAVE_TERMIOS): Remove.
housekeeping
Also check for gregset_t and fpregset_t types.
* configure: Regenerate.
* core-regset.c (sys/procfs.h): Only include if HAVE_SYS_PROCFS_H
is defined.
(fetch_core_registers): Turn into stub unless both HAVE_GREGSET_T
and HAVE_FPREGSET_T are defined. These changes allow systems
like linux that are migrating to /proc support to use a single
configuration for both new and old versions.
* config/i386/linux.mt: Note that this is now for both a.out and
ELF systems.
* config/i386/linux.mh (NATDEPFILES): Add solib.o, core-regset.o,
i386v4-nat.o
* config/i386/tm-linux.h (tm-sysv4.h): Include.
* config/i386/xm-linux.h (solib.h): Include
(SVR4_SHARED_LIBS): Define.
* i386v4-nat.c: Only compile if HAVE_SYS_PROCFS_H is defined.
(supply_gregset, fill_gregset): Compile if HAVE_GREGSET_T defined.
(supply_fpregset, fill_fpregset): Compile if HAVE_FPREGSET_T defined.
* configure.in, configure: Recognize rs6000-*-aix4*.
* config/powerpc/xm-aix.h: Reduce to include "xm-aix4.h".
* config/rs6000/aix4.mh (XM_FILE): Point to xm-aix4.h.
* config/rs6000/xm-aix4.h: New file.
* config/xm-aix4.h: New file.
From the Mentor work...enable configure & build on rs6000-ibm-aix4.1.*.
Note this is an unbelievably buggy debugger on this host.
* gdbserver/low-linux.c: New file.
* remote.c (remote_read_bytes): Fix aborts on larger packets.
* config/i386/linux.mh (GDBSERVER_DEPFILES, GDBSERVER_LIBS):
Define.
* stabsread.c (define_symbol): If register value is too large,
tell what it is and what max is.
that use ptrace(). This is not as useful as doing a full dump in a
human readable format, but is better than nothing when you are trying
to verify what is actually in the user struct.
* infptrace.c (udot_info): New function.
(PT_*): Define each individually if that one is not defined.
Update copyright to 1996.
* rs6000-nat.c (kernel_u_size): New function
Include <sys/user.h> for "struct user"
Update copyright to 1996.
* alpha-nat.c (kernel_u_size): New function.
Include <sys/user.h> for "struct user"
Update copyright to 1996.
* sparc-nat.c (kernel_u_size): New function.
Include <sys/user.h> for "struct user"
Update copyright to 1996.
* i386b-nat.c (kernel_u_size): New function.
Update copyright to 1996.
* i386v-nat.c (kernel_u_size): New function.
Update copyright to 1996.
* config/i386/nm-fbsd.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
* config/i386/nm-linux.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
* config/sparc/nm-sun4os4.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
* config/alpha/nm-osf2.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
* config/rs6000/nm-rs6000.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
from NUM_REGS to get number of general registers that we care about.
Update copyright to 1996.
* config/i386/tm-i386.h (REGISTER_BYTES): Define in terms
of number of general regs and number of floating point regs.
Update copyright to 1996.
(TARGET_HAS_HARDWARE_WATCHPOINTS, etc): Define as for Irix 4;
from Lee Iverson <leei@ai.sri.com>.
* config/mips/irix5.mh (NAT_FILE): Use nm-irix5.h.
* config/mips/irix[345].mh (MUNCH_DEFINE): Remove.
* configure: Update.
* config/powerpc/macos.mh, config/powerpc/macos.mt,
config/powerpc/nm-macos.h, config/powerpc/tm-macos.h, mac-nat.c:
New files, native PowerMac debugging support.
* Makefile.in (mac-nat.o): Add build rule.
* mpw-config.in (enable_cflags): Add support.
(m68k-apple-macos, powerpc-apple-macos): Fix natdepfiles to
list object file instead of source file.
* mpw-make.sed (@ENABLE_CFLAGS@): Don't edit out, replace with
value of variable.
(install, install-only): Edit MPW-specific installation into
place of Unix shell code.
* mac-gdb.r: Fix version resources to use symbolic version strings.
(cfrg): New resource, code fragment for PowerMac.
