(resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
(handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
event, don't copy `execd_pathname' to pending_follow, use the
event copy instead. Release `execd_pathname' once done with
handling the event.
target_has_stack.
* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
when there is no thread selected.
(mi_cmd_execute): Don't special case commands that can run without
a valid selected thread.
* top.c (execute_command): Don't special case commands that can
run without a valid selected thread. Use has_stack_frames.
* infcmd.c (ensure_valid_thread): New.
(continue_1, step_1, jump_command, signal_command): Use it.
(detach_command): Error out if there's no selected thread/inferior.
* thread.c (print_thread_info): Allow having no thread selected.
(switch_to_thread): Don't read the PC if there is no current thread.
(do_restore_current_thread_cleanup): Don't record the current
frame if there is no current thread.
(make_cleanup_restore_current_thread): Don't read frame info if
there is no selected thread.
(_initialize_thread): Don't mark commands as
"no_selected_thread_ok".
* frame.c (get_current_frame): Error out if there is no valid
selected thread.
(has_stack_frames): Return false if there is no valid
selected thread.
* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
"no_selected_thread_ok".
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): Delete.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Delete declaration.
* stack.c (get_selected_block): Use has_stack_frames.
* mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
to the about_to_proceed observer notification.
(mi_about_to_proceed): New.
(mi_on_resume): Only output ^running and the prompt here if the
target was proceeded.
* breakpoint.c (breakpoint_proceeded): New static.
(breakpoint_about_to_proceed): New.
(_initialize_breakpoints): Attach breakpoint_about_to_proceed to
the about_to_proceed observer notification.
* inferior.h (breakpoint_proceeded): Delete declaration.
* infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
Notify the about_to_proceed observers.
(struct inferior_status): Delete breakpoint_proceeded member.
(save_inferior_status): Don't save it.
(restore_inferior_status): Don't restore it.
* mi-main.h (mi_proceeded): Declare.
* mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
a command.
gdb/doc/
* observer.texi (about_to_proceed): New.
Silence a few -Wmissing-prototypes warnings.
PR build/9877:
* amd64-nat.c: Include "amd64-nat.h".
* fork-child.c (_initialize_fork_child): Ditto.
* gcore.c (_initialize_gcore): Ditto.
* inf-ptrace.c: Include "inf-ptrace.h".
(inf_ptrace_store_registers): Make it static.
* linux-nat.c (linux_nat_terminal_ours): Make it static.
(_initialize_linux_nat): Declare before definition.
* linux-tdep.c: Include "linux-tdep.h".
* linux-thread-db.c (_initialize_thread_db): Declare before
definition.
* proc-service.c (_initialize_proc_service): Ditto.
* remote.c (remote_send_printf): Make it static.
* solib.c: Include "solib.h".
* symfile-mem.c (_initialize_symfile_mem): Declare before
definition.
* ada-lang.c (ada_la_decode, ada_match_name)
(ada_suppress_symbol_printing, ada_is_array_type)
(ada_value_ptr_subscript, ada_array_length)
(ada_to_static_fixed_value): Make them static.
(_initialize_ada_language): Declare before definition.
* ada-tasks.c (ada_get_task_number, ada_get_environment_task)
(ada_task_list_changed, ada_new_objfile_observer): Make them
static.
(_initialize_tasks): Declare before definition.
* addrmap.c (_initialize_addrmap): Declare before definition.
* auxv.c (default_auxv_parse): Make it static.
* bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
them static.
* breakpoint.c (remove_sal): Add line break.
(expand_line_sal_maybe): Make it static.
* cp-name-parser.y: Include "cp-support.h".
* cp-valprint.c (cp_find_class_member): Make it static.
* eval.c (value_f90_subarray): Ditto.
* exceptions.c (print_any_exception): Ditto.
* findcmd.c (_initialize_mem_search): Declare before definition.
* frame.c (frame_observer_target_changed): Make it static.
* gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
* inf-child.c: Include "inf-child.h".
* inferior.h (valid_inferior_id): Rename to ...
(valid_gdb_inferior_id): ... this.
* infrun.c (infrun_thread_stop_requested, siginfo_make_value):
Make them static.
* jv-lang.c (java_language_arch_info): Make it static.
* m2-typeprint.c (m2_get_discrete_bounds): Ditto.
* osdata.c (info_osdata_command): Make it static.
* regcache.c (regcache_observer_target_changed): Make it static.
* reverse.c (_initialize_reverse): Declare before definition.
* stabsread.c (cleanup_undefined_types_noname)
(cleanup_undefined_types_1): Make them static.
* symfile.c (place_section): Make it static.
* symtab.c (find_pc_sect_psymtab_closer): Make it static.
* target-descriptions.c (_initialize_target_descriptions): Declare
before definition.
* target.c (default_get_ada_task_ptid, find_default_can_async_p)
(find_default_is_async_p, find_default_supports_non_stop): Make
them static.
(target_supports_non_stop): Add prototype.
(dummy_pid_to_str): Make it static.
* utils.c (_initialize_utils): Declare before definition.
* ada-exp.y (_initialize_ada_exp): Declare before definition.
* solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
* target.h (struct target_ops): Add a prototype to the
to_can_execute_reverse callback.
* macroscope.c (_initialize_macroscope): Declare before definition.
* cp-namespace.c (_initialize_cp_namespace): Declare before definition.
* python/python.c (_initialize_python): Declare before definition.
* tui/tui-command.c: Include "tui/tui-command.h".
* tui/tui-data.c (init_content_element, init_win_info): Make them
static.
* tui/tui-disasm.c: Include "tui/tui-disasm.h".
* tui/tui-interp.c (_initialize_tui_interp): Declare before
definition.
* tui/tui-layout.c: Include "tui/tui-layout.h".
(_initialize_tui_layout): Declare before definition.
* tui/tui-regs.c: Include "tui/tui-regs.h".
(tui_display_reg_element_at_line): Make it static.
(_initialize_tui_regs): Declare before definition.
* tui/tui-stack.c (_initialize_tui_stack): Declare before
definition.
* tui/tui-win.c: Include "tui/tui-win.h".
(_initialize_tui_win): Declare before definition.
(tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
* tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
(tui_get_cmd_list): Add a prototype.
* tui/tui-windata.c: Include tui-windata.h.
* tui/tui-wingeneral.c (box_win): Make it static.
* cli/cli-logging.c (show_logging_command): Make it static.
(_initialize_cli_logging): Declare before definition.
* mi/mi-common.c (_initialize_gdb_mi_common): Declare before
definition.
* ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
* infcmd.c (finish_command_continuation): Pass '1' for
'print_frame' parameter to the observer.
* infrun.c (normal_stop): Don't print mi-specific information
here. Pass 'stop_print_frame' to the 'print_frame' parameter
of the observer.
* mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
If we need to print frame, and current uiout is not the MI one,
print frame again.
* target.c (target_waitstatus_to_string): New function. Copied from
debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
TARGET_WAITKIND_NO_HISTORY.
(debug_to_wait): Call it.
* infrun.c (wait_for_inferior): If debug_infrun, print result of
target_wait.
(fetch_inferior_event): Ditto.
PR gdb/9664:
* infrun.c (normal_stop): Tag threads as stopped, and run the
hook-stop before printing the stack frame.
2009-01-23 Pedro Alves <pedro@codesourcery.com>
PR gdb/9664:
* gdb.base/hook-stop-frame.c, gdb.base/hook-stop-frame.exp: New.
caller_state.
(dummy_frame_push): Replace caller_regcache arg with caller_state.
All callers updated.
(remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
(dummy_frame_pop): Rewrite. Verify requested frame is in the
dummy frame stack. Restore program state.
(cleanup_dummy_frames): Rewrite.
(dummy_frame_sniffer): Update. Make static.
* dummy-frame.h (regcache,frame_info): Delete forward decls.
(inferior_thread_state): New forward decl.
(dummy_frame_push): Update prototype.
* frame.c (frame_pop): dummy_frame_pop now does all the work for
DUMMY_FRAMEs.
* infcall.c (breakpoint_auto_delete_contents): Delete.
(get_function_name,run_inferior_call): New fns.
(call_function_by_hand): Simplify by moving some code to
get_function_name, run_inferior_call. Inferior function call wrapped
in TRY_CATCH so there's less need for cleanups and all exits from
proceed are handled similarily. Detect program exit.
Detect program stopping in a different thread.
Make error messages more consistent.
* inferior.h (inferior_thread_state): Declare (opaque type).
(save_inferior_thread_state,restore_inferior_thread_state,
make_cleanup_restore_inferior_thread_state,
discard_inferior_thread_state, get_inferior_thread_state_regcache):
Declare.
(save_inferior_status): Update prototype.
* infrun.c: (normal_stop): When stopped for the completion of an
inferior function call, verify the expected stack frame kind.
(inferior_thread_state): New struct.
(save_inferior_thread_state,restore_inferior_thread_state,
do_restore_inferior_thread_state_cleanup,
make_cleanup_restore_inferior_thread_state,
discard_inferior_thread_state,
get_inferior_thread_state_regcache): New functions.
(inferior_status): Move stop_signal, stop_pc, registers to
inferior_thread_state. Remove restore_stack_info.
(save_inferior_status): Remove arg restore_stack_info.
All callers updated. Remove saving of state now saved by
save_inferior_thread_state.
(restore_inferior_status): Remove restoration of state now done by
restore_inferior_thread_state.
(discard_inferior_status): Remove freeing of registers, now done by
discard_inferior_thread_state.
* gdb.base/break.exp: Update expected gdb output.
* gdb.base/sepdebug.exp: Ditto.
* gdb.mi/mi-syn-frame.exp: Ditto.
* gdb.mi/mi2-syn-frame.exp: Ditto.
* gdb.base/call-signal-resume.exp: New file.
* gdb.base/call-signals.c: New file.
* gdb.base/unwindonsignal.exp: New file.
* gdb.base/unwindonsignal.c: New file.
* gdb.threads/interrupted-hand-call.exp: New file.
* gdb.threads/interrupted-hand-call.c: New file.
* gdb.threads/thread-unwindonsignal.exp: New file.
* gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
Declare.
* thread.c (finish_thread_state, finish_thread_state_cleanup): New.
* infrun.c (wait_for_inferior, fetch_inferior_event): If an error
is thrown while handling an event, finish the thread state.
(normal_stop): Use finish_thread_state cleanup.
* infcmd.c (run_command_1): If an error is thrown while starting
the inferior, finish the thread state.
2009-01-07 Pedro Alves <pedro@codesourcery.com>
Delete ONE_PROCESS_WRITETEXT leftovers.
* breakpoint.c (insert_bp_location): Delete process_warning
argument. Adjust.
(insert_breakpoint_locations): Adjust.
(reattach_breakpoints): Adjust.
* infrun.c (normal_stop): Drop "It might be running in another
process" notice.
gdb/doc/
2009-01-07 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Error in Breakpoints): Delete mention of "The same
program may be running in another process" errors.
* gdbint.texinfo (Native Conditionals): Delete
ONE_PROCESS_WRITETEXT description.
PR gdb/8812:
* infrun.c (handle_command): Don't print a header or notify the
target about signal changes if we didn't change any signal.
2008-12-31 Pedro Alves <pedro@codesourcery.com>
PR gdb/8812:
* gdb.base/signal.exp: Change kfail to fail, and update PR number.
TARGET_WAITKIND_SIGNALLED, switch inferior_ptid to the event ptid.
* linux_thread_db.c (thread_db_wait): On a TARGET_WAITKIND_EXITED
or TARGET_WAITKIND_SIGNALLED, return the ptid the beneath target
returned.
* inf-ptrace.c (inf_ptrace_wait): Return inferior_ptid instead of
minus_one_ptid if the inferior disappeared.
* rs6000-nat.c (rs6000_wait): Likewise.
* spu-linux-nat.c (spu_child_wait): Likewise.
* infrun.c (clear_proceed_status_thread): New function.
(clear_proceed_status_callback): New function.
(clear_proceed_status): In all-stop mode, clear per-thread
proceed status of *all* threads, not only the current.
(handle_inferior_event): In all-stop mode, if we're stepping
one thread, but got some inferior event in another thread
that does not cause GDB to break to the user interface,
ensure the interrupted stepping operation continues in the
original thread.
(currently_stepping): Move thread-related tests to ...
(currently_stepping_thread): ... this new function.
(currently_stepping_callback): New function.
(do_all_inferior_continuations)
(discard_all_inferior_continuations): Declare.
* utils.c (add_inferior_continuation)
(do_all_inferior_continuations)
(discard_all_inferior_continuations): New.
* inferior.h (struct inferior) <continuations>: New field.
* inferior.c (free_inferior): Discard all the inferior
continuations.
* inf-loop.c (inferior_event_handler): Do all current inferior
continuations.
* infcmd.c (attach_command): Register an inferior continuation
instead of a thread continuation.
* infrun.c (handle_inferior_event): If stop_soon is
STOP_QUIETLY_NO_SIGSTOP, also expect a TARGET_SIGNAL_0.
Pedro Alves <pedro@codesourcery.com>
* infrun.c (can_use_displaced_stepping): Change type to
const char pointer.
(can_use_displaced_stepping_auto): New string.
(can_use_displaced_stepping_on): New string.
(can_use_displaced_stepping_off): New string.
(can_use_displaced_stepping_enum): New array.
(show_can_use_displaced_stepping): In auto mode, also show
the current effect of the option.
(use_displaced_stepping): Return non-zero if displaced
stepping is auto, and can be used with GDBARCH, and in
non-stop mode. Return non-zero if displaced stepping is on,
and can be used with GDBARCH. Return zero otherwise.
(_initialize_infrun): Make the "set displaced-stepping"
command an enum command. Change its class to class_run.
Place it in the top level set list. Extend help to describe
the auto mode.
2008-10-24 Hui Zhu <teawater@gmail.com>
Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (displaced-stepping): Describe the auto mode
setting, and say it's the default. This is now a mainstream
setting instead of a maintenance setting.
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* defs.h: Mention ptid_is_pid.
* inferior.h (ptid_is_pid): Declare.
* gdbthread.h (struct thread_info) <stop_requested>: New field.
(set_stop_requested): Declare.
* infcmd.c (interrupt_target_1): Call set_stop_requested.
* infrun.c (clear_proceed_status): Clear stop_requested.
(infrun_thread_stop_requested_callback,
infrun_thread_stop_requested): New.
(handle_inferior_event): If a TARGET_SIGNAL_TRAP is reported on a
thread that had an explicit stop request, pretend we got a
TARGET_SIGNAL_0. Always stop if the thread had an explicit stop
request.
(print_stop_reason): In the SIGNAL_RECEIVED case, if we're not
outputting to MI, and we got a TARGET_SIGNAL_0, print "# Stopped",
instead of mentioning signal 0.
(ptid_is_pid): New.
* thread.c (set_stop_requested): New.
* linux-nat.c (queued_waitpid): Rename to ...
(queued_waitpid_1): ... this. Add `peek' argument. Handle it.
(queued_waitpid): New, as wrapper to queued_waitpid_1.
(push_waitpid): Push the SIGTRAP to the local event queue, to the
kernel's.
(send_sigint_callback): Delete.
(linux_nat_stop_lwp): New.
(linux_nat_stop): Use it.
gdb/doc/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* observer.texi (thread_stop_requested): New.
gdb/testsuite/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* lib/mi-support.exp (mi_expect_interrupt): Expect signal 0
instead of SIGINT.
Target interface for reverse debugging.
* target.h (enum target_waitkind):
Add new wait event, TARGET_WAITKIND_NO_HISTORY.
(struct target_ops): New method to_can_execute_reverse.
(target_can_execute_reverse): New macro.
* target.c (update_current_target): Inherit to_can_execute_reverse.
Remote interface for reverse debugging.
* remote.c (remote_can_execute_reverse): New target method.
(remote_resume): Check for reverse exec direction, and send
appropriate command to target.
(remote_wait_as): Check target response for NO_HISTORY status.
Also check for empty reply (target doesn't understand "bs" or "bc).
(remote_vcont_resume): Jump out if attempting reverse execution.
Event handling interface for reverse debugging.
* infrun.c (execution_direction): New state variable.
(enum inferior_stop_reason): Add NO_HISTORY reason.
(handle_inferior_event): Handle TARGET_WAITKIND_NO_HISTORY.
Handle stepping over a function call in reverse.
Handle stepping thru a line range in reverse.
Handle setting a step-resume breakpoint in reverse.
Handle stepping into a function in reverse.
Handle stepping between line ranges in reverse.
(print_stop_reason): Print reason for NO_HISTORY.
(step_into_function): Rename to handle_step_into_function.
(handle_step_into_function_backward): New function.
(set_exec_direction_func, show_exec_direction_func): New funcs.
(proceed): No need to singlestep over a breakpoint
when resuming in reverse.
* inferior.h (enum exec_direction_kind): New enum.
(execution_direction): Export new execution state variable.
* breakpoint.c (make_breakpoint_silent): New function.
* breakpoint.h (make_breakpoint_silent): Export.
* infcmd.c (finish_command): Check for reverse exec direction.
(finish_backward): New function, handle finish cmd in reverse.
User interface for reverse execution.
* Makefile.in (reverse.c): New file.
* reverse.c: New file. User interface for reverse execution.
* breakpoint.c (breakpoint_init_inferior): Clean up the moribund
locations list.
(moribund_breakpoint_here_p): Record the moribund
location in the moribund_locations vector.
* breakpoint.h (moribund_breakpoint_here_p): Declare.
(displaced_step_fixup): Check if the breakpoint the thread was
trying to step over has been removed since having been placed in
the displaced stepping queue.
(adjust_pc_after_break): In non-stop mode, check for a moribund
breakpoint at the stop pc.
(handle_inferior_event): Don't retire moribund breakpoints on
TARGET_WAITKIND_IGNORE.
gdb/testsuite/
* gdb.mi/mi-nsmoribund.exp, gdb.mi/nsmoribund.c: New test.
comments.
(mips_linux_skip_resolver): Also use glibc_skip_solib_resolver.
(mips_linux_init_abi): Do not override skip_trampoline_code.
* configure.tgt (mips*-*-linux*): Add glibc-tdep.o.
* mips-tdep.c (mips32_scan_prologue): Stop scanning at branches.
(mips_stub_frame_sniffer): Use the stub frame sniffer for PIC stubs.
(mips_skip_mips16_trampoline_code): Rename from
mips_skip_trampoline_code.
(mips_skip_pic_trampoline_code, mips_skip_trampoline_code): New.
* infrun.c (handle_inferior_event): Do not pass zero to
in_solib_dynsym_resolve_code.
* infrun.c (wait_for_inferior): Move this ECS->EVENT_THREAD
initialization ...
(fetch_inferior_event): ... and this ECS->EVENT_THREAD initialization
...
(handle_inferior_event): ... here after the add_thread call together
with the local adjust_pc_after_break and reinit_frame_cache calls.
* infrun.c (context_switch): Don't save and load infrun state.
(context_switch_to): Delete.
* infcmd.c (proceed_thread_callback): Replace context_switch_to
calls by switch_to_thread calls.
* gdbthread.h (save_infrun_state, load_infrun_state): Delete.
* thread.c (main_thread_state, main_thread_executing): Delete.
(inferior_thread): Delete references to them.
(add_thread_silent): Fix case where we're adding a thread with the
same ptid as an exited thread. Remove references to
context-switching.
(load_infrun_state, save_infrun_state): Delete.
(thread_alive, is_thread_state, any_running, is_executing)
(set_executing): Remove the special handling for targets that
don't register any thread.
(restore_current_thread, thread_apply_all_command)
(do_captured_thread_select): Unconditionally call
switch_to_thread.
* mi/mi-main.c (mi_cmd_execute): Check for exited threads.
Call switch_to_thread instead of context_switch_to.
* breakpoint.h (bpstat_do_actions): Remove bpstat* argument.
* breakpoint.c (bpstat_do_actions): Rename to ...
(bpstat_do_actions_1): ... this. Make static. Change return type
to int. Return true if a breakpoint proceeded.
(bpstat_do_actions): New, as wrapper around bpstat_do_actions_1.
(delete_breakpoint): Don't reference the global stop_bpstat; it's
gone.
* gdbthread.h (struct thread_info): Add stop_bpstat.
(save_infrun_state, load_infrun_state): Remove stop_bpstat
argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_bpstat argument, and the code referencing it.
* infcall.c: Include "gdbthread.h".
(call_function_by_hand): Adjust.
* exceptions.c: Include "gdbthread.h".
(throw_exception): Adjust.
* infcmd.c (stop_bpstat): Delete.
(continue_command): In all-stop, set the ignore count on the
thread that reported the stop. In non-stop, set it on the current
thread.
(finish_command_continuation): Adjust.
(program_info): Adjust.
* infrun.c (clear_proceed_status): Adjust.
(context_switch): Don't context-switch stop_bpstat.
(handle_inferior_event): Adjust.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* inf-loop.c (inferior_event_handler): Remove parameter to
bpstat_do_actions call.
* top.c (command_loop): Remove parameter to bpstat_do_actions
call. Call it unconditionally.
* event-top.c (command_handler): Ditto.
* python/python.c (execute_gdb_command): Ditto.
* dummy-frame.c: Include "observer.h".
(dummy_frame_push): Do not check for stale frames.
(dummy_frame_pop): New function.
(cleanup_dummy_frames): New function.
(_initialize_dummy_frame): Install it as inferior_created observer.
* frame.h (struct frame_id): Update comments.
(frame_id_inner): Remove prototype.
* frame.c (frame_id_inner): Make static. Add comments.
(frame_find_by_id): Update frame_id_inner safety net check to avoid
false positives for targets using non-contiguous stack ranges.
(get_prev_frame_1): Update frame_id_inner safety net check.
(frame_pop): Call dummy_frame_pop when popping a dummy frame.
* stack.c (return_command): Directly pop the selected frame.
* infrun.c (handle_inferior_event): Remove dead code.
* i386-tdep.c (i386_push_dummy_call): Update comment.
* infrun.c (struct thread_stepping_state): Delete sal member.
(init_thread_stepping_state): Add local sal. Use it instead of
tss->sal.
(handle_inferior_event): New local stop_pc_sal. Use it instead of
tss->sal.
(step_into_function): Add local stop_func_sal. Use it instead of
tss->sal.
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
* infrun.c (resume): In non-stop mode, always resume just one
thread.
(proceed): Don't call prepare_to_proceed in non-stop mode.
(fetch_inferior_event): In non-stop mode, switch context before
handling the event.
(error_is_running, ensure_not_running): New.
(handle_inferior_event): In non-stop mode: Mark only the event
thread as stopped. Require that the target module manages adding
threads to the thread list. Assert that there isn't a
deferred_step_ptid set. Don't switch to infwait_thread_hop_state.
(normal_stop): Only mark not-running if inferior hasn't exited.
In non-stop mode, only mark the event thread.
* thread.c:Include "cli/cli-decode.h".
(print_thread_info): Don't read from a running thread.
Output "(running)" if thread is running.
(switch_to_thread): Don't read stop_pc if thread is executing.
(do_restore_current_thread_cleanup): Don't write to a running
thread.
(thread_apply_all_command): Don't read from a running thread. In
non-stop mode, do a full context-switch instead of just switching
threads.
(thread_apply_command): In non-stop mode, do a full context-switch
instead of just switching threads.
(do_captured_thread_select): Likewise. Inform user if selected
thread is running.
(_initialize_thread): Mark "info threads" and "thread" and
async_ok.
* inf-loop.c (inferior_event_handler): In non-stop mode, don't
unregister the target from the event loop.
* infcmd.c (continue_command, step_1, jump_command)
(signal_command): Ensure the selected thread isn't running.
(interrupt_target_command): In non-stop mode, interrupt only the
selected thread.
* inferior.h (error_is_running, ensure_not_running): Declare.
* target.h (struct target_ops): Add ptid argument to the to_stop
member.
(target_stop): Add ptid_t argument.
* target.c (update_current_target): Add ptid argument to to_stop's
type.
(debug_to_stop): Add ptid_t argument.
(debug_to_rcmd): Set to_stop_ptid.
* remote.c (remote_stop): Add ptid_t argument.
(async_remote_interrupt): Add inferior_ptid to target_stop.
* inf-ptrace.c (inf_ptrace_stop): Add ptid argument.
* Makefile.in (thread.o): Depend on $(cli_decode_h).
* infrun.c (proceed): Clear the stepping state, set
previous_inferior_ptid and clear infwait state.
(wait_for_inferior): Don't clear the stepping state, set
previous_inferior_ptid, or clear the infwait state here.
(fetch_inferior_event): Don't clear the stepping state, set
previous_inferior_ptid, or clear the infwait state here. Don't
condition on wait_for_more.
* infrun.c (currently_stepping): Take a struct
thread_stepping_state instead of an execution_control_state.
(struct thread_stepping_state): New, split from
execution_control_state.
(gtss, tss): New globals.
(proceed): Clear the stepping state, set previous_inferior_ptid
and clear infwait state.
(init_wait_for_inferior): Clear the stepping state,
previous_inferior_ptid and infwait state.
(waiton_ptid, infwait_state): New, split from
execution_control_state.
(struct execution_control_state): Members that persist through
events moved out to either struct thred_stepping_state or made
global. Deleted unneeded wp, saved_inferior_ptid, tmpstatus.
(wait_for_inferior, fetch_inferior_event): Use local
execution_control_state. Update to execution_control_state split.
(init_execution_control_state): Adjust.
(init_thread_stepping_state): New, extracted from
init_execution_control_state.
(context_switch): Take a ptid instead of an
execution_control_state.
(context_switch_to): Adjust.
(adjust_pc_after_break): Adjust.
(init_infwait_state): New.
(handle_inferior_event): Adjust.
* gdbthread.h: Remove unneeded forward declarations.
Include "inferior.h".
(struct thread_info): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi and stop_signal members.
(save_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
(load_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
* thread.c (load_infrun_state): In non-stop mode, load
continuations, intermediate_continuations, proceed_to_finish,
step_over_calls, stop_step, step_multi and stop_signal.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(free_thread): Clear The thread's stop_bpstat.
* inferior.h (context_switch_to): Declare.
* infrun.c (ecss): New global.
(context_switch): Context switch continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(wait_for_inferior): Use global ecss.
(async_ecss, async_ecs): Delete.
(fetch_inferior_event): Use global ecss.
(context_switch_to): New.
* top.c (execute_command): In non-stop, only check if the current
thread is running, in all-stop, check if there's any thread
running.
* breakpoint.c (bpstat_remove_breakpoint): New.
(bpstat_remove_breakpoint_callback): New.
(delete_breakpoint): Clear the stop_bpstats of all threads.
* mi/mi-main.c (mi_cmd_execute): In non-stop, only check if the
current thread is running, in all-stop, check if there's any
thread running.
* Makefile.in (gdbthread_h): Depend on $(inferior_h).
* target.h (struct target_waitstatus): Store related_pid as a ptid.
(inferior_has_forked, inferior_has_vforked, inferior_has_execd):
Take a ptid_t.
* breakpoint.h (struct breakpoint): Change forked_inferior_pid
type to ptid.
* breakpoint.c (print_it_typical, bpstat_check_location)
(print_one_breakpoint_location, set_raw_breakpoint_without_location)
(create_fork_vfork_event_catchpoint): Adjust.
* infrun.c (fork_event): Change parent_pid and child_pid types to
ptid.
(follow_exec, inferior_has_forked, inferior_has_vforked)
(inferior_has_execd): Take a ptid_t and don't trim it.
* linux-thread-db.c (thread_db_wait): Don't trim the returned ptid.
* linux-nat.c (linux_child_follow_fork): Adjust.
* inf-ptrace.c (inf_ptrace_wait): Adjust.
* inf-ttrace.c (inf_ttrace_wait): Adjust.
* win32-nat.c (get_win32_debug_event): Don't set related_pid.
* inferior.h (target_executing): Delete.
* gdbthread.h (struct thread_info): Add executing_ field.
(set_executing, is_executing): New.
* thread.c (main_thread_executing): New.
(init_thread_list): Clear it and also main_thread_running.
(is_running): Return false if target has no execution.
(any_running, is_executing, set_executing): New.
* top.c: Include "gdbthread.h".
(target_executing): Delete.
(execute_command): Replace target_executing check by any_running.
* event-top.c: Include "gdbthread.h".
(display_gdb_prompt, command_handler): Replace target_executing by
is_running.
* inf-loop.c: Include "gdbthread.h". Don't mark as not executing
here. Replace target_executing by is_running.
* infrun.c (handle_inferior_event): Mark all threads as
not-executing.
* linux-nat.c (linux_nat_resume): Don't mark thread as executing
here.
* stack.c (get_selected_block): Return null if inferior is
executing.
* target.c (target_resume): Mark resumed ptid as executing.
* breakpoint.c (until_break_command): Replace target_executing
check by is_executing.
* remote.c (remote_async_resume): Don't mark inferior as executing
here.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing
by any_running.
* mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute)
(mi_execute_async_cli_command): Replace target_executing by
is_running.
* frame.c (get_current_frame): Error out if the current thread is
executing.
(has_stack_frames): New.
(get_selected_frame, deprecated_safe_get_selected_frame): Check
has_stack_frames.
* Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on
$(gdbthread_h).
* monitor.c (monitor_open): Include "gdbthread.h". Clear thread
list here.
* remote.c (record_currthread): Upgrade the main thread and its
entry in the thread list if this is the first time we hear about
threads.
(remote_thread_alive): Consider magic_null_ptid or a ptid without
a tid member always alive.
(remote_find_new_threads): Don't update the main thread here.
(remote_start_remote): Clear thread list here. Always add the
main thread.
(extended_remote_attach_1): Add the main thread here.
(extended_remote_mourn_1): Re-add the main thread here.
(extended_remote_create_inferior_1): Add a main thread.
* Makefile.in (monitor.o): Depend on $(gdbthread_h).
