Thiago Jung Bauermann <bauerman@br.ibm.com>
* infcmd.c (default_print_registers_info): Also print hex
raw contents for TYPE_CODE_DECFLOAT registers.
* ppc-tdep.h (gdbarch_tdep): Add ppc_dl0_regnum member.
* rs6000-tdep.c (IS_DFP_PSEUDOREG): New macro.
(rs6000_register_name): Add support for DFP pseudo-registers.
(rs6000_pseudo_register_type): Likewise.
rs6000_pseudo_register_reggroup_p): Likewise.
(ppc_pseudo_register_read): New function.
(ppc_pseudo_register_write): Likewise.
(rs6000_pseudo_register_read): Likewise.
(rs6000_pseudo_register_write): Likewise.
(e500_pseudo_register_read): Move checks to
rs6000_pseudo_register_read.
(e500_pseudo_register_write): Move checks to
rs6000_pseudo_register_write.
(rs6000_gdbarch_init): Initialize tdep->ppc_dl0_regnum. Install
rs6000_pseudo_register_read and rs6000_pseudo_register_write
in gdbarch if SPE or DFP is available. Adjust gdbarch's
num_pseudo_regs to account for DFP pseudo regs.
* NEWS: Mention exec tracing support.
* inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
exec events.
* infcmd.c (kill_if_already_running, detach_command)
(disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
* infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
(follow_exec): Do not check may_follow_exec. Do not mourn and push
targets. Apply the sysroot path to the loaded executable. Use
no_shared_libraries.
* linux-nat.c (linux_child_follow_fork): Print fork following
messages if verbose.
(kill_wait_callback): Kill again before waiting a second time.
* symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
no_shared_libraries.
* gdb.base/foll-exec.exp: Update header. Skip on remote targets.
Run on GNU/Linux.
(do_exec_tests): Check for systems which do not support catchpoints.
Do not match START.
* gdb.base/foll-fork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_fork_catchpoints): New.
(explicit_fork_child_follow, catch_fork_child_follow)
(tcatch_fork_parent_follow): Update expected messages.
(do_fork_tests): Use check_fork_catchpoints.
* gdb.base/foll-vfork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_vfork_catchpoints): New.
(vfork_parent_follow_to_bp, tcatch_vfork_then_child_follow): Update
expected messages.
(do_vfork_and_exec_tests): Use check_fork_catchpoints.
* infcmd.c (registers_info): Check for a user register before
calling target's gdbarch_print_registers_info(). If found to be
so, extract the implicit value of user register and call
print_scalar_formatted().
* Makefile.in: (infcmd.o): Add $(user_regs_h).
* infcmd.c (default_print_registers_info, print_return_value)
(print_vector_info, print_float_info): Replace current_gdbarch by
gdbarch.
(registers_info): Use get_frame_arch to get at the current
architecture by frame_info.
(resolve_pending_breakpoint): Remove.
(re_enable_breakpoints_in_shlibs): Remove.
(unlink_locations_from_global_list): New.
(update_breakpoint_locations): New.
(breakpoint_re_set_one): Don't bail out on pending breakpoints.
Use parse_condition and update_breakpoint_location to
reset breakpoint. Ignore 'symbol not found' error from
decode_line_1.
(breakpoint_re_set): Don't emit newline before the
reason why breakpoint is not reset.
(do_enable_breakpoint): Don't specially process pending
breakpoints.
(free_bp_location): New.
(break_command_1): For pending breakpoints, initialize
all fields of a sal with zeroes.
* breakpoint.h (re_enable_breakpoints_in_shlibs): Remove.
* infcmd.c (post_create_inferior): Don't call
re_enable_breakpoints_in_shlibs.
* infrun.c (handle_inferior_event): Likewise.
* solib-irix.c (irix_solib_create_inferior_hook): Likewise.
* solib-osf.c (osf_solib_create_inferior_hook): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
(run_command_1): Always call post_create_inferior with 0 as
from_tty.
* i386-cygwin-tdep.h: New.
* i386-cygwin-tdep.c: Include "i386-cygwin-tdep.h".
(win32_xfer_shared_library): Make it extern.
* win32-nat.c: Include gdb_obstack.h and xml-support.h and
i386-cygwin-tdep.h.
(win32_so_ops): Delete.
(get_relocated_section_addrs): Delete.
(solib_symbols_add): Delete.
(register_loaded_dll): Delete.
(win32_make_so): New.
(handle_load_dll): Use win32_make_so.
(win32_free_so): Free the passed in so.
(win32_relocate_section_addresses): Delete.
(win32_solib_create_inferior_hook): Delete.
(handle_unload_dll): Don't add PE offset here. Free so with
win32_free_so instead of free_so.
(win32_special_symbol_handling): Delete.
(get_win32_debug_event): Remove unneeded calls. Set state to
TARGET_WAITKIND_LOADED on a dll unload.
(do_initial_win32_stuff): Clear cygwin_load_start and
cygwin_load_end.
(map_code_section_args): Delete.
(dll_code_sections_add): Delete.
(core_section_load_dll_symbols): Delete.
(win32_xfer_shared_libraries): New.
(win32_current_sos): Delete.
(win32_xfer_partial): New.
(open_symbol_file_object): Delete.
(in_dynsym_resolve_code): Delete.
(init_win32_ops): Set win32_xfer_partial as to_xfer_partial member
of win32_ops. Remove win32_so_ops settings. Don't set
current_target_so_ops here.
* Makefile.in (i386_cygwin_tdep_h): New variable.
(i386-cygwin-tdep.o): Update dependencies.
(win32-nat.o): Update dependencies.
run_command.
(run_command): Replace implementation by call to run_command_1.
(start_command): Use run_command_1 to insert the temporary
breakpoint and run the program. Remove code that's no longer
needed, as already done at the proper time by run_command_1.
from run_command().
(run_command): Replace extracted code by call to
kill_if_already_running().
(start_command): New function.
(_initialize_infcmd): Add "start" command.
RETURN_VALUE_ABI_RETURNS_ADDRESS and
RETURN_VALUE_ABI_PRESERVES_ADDRESS.
* infcmd.c (legacy_return_value): New function.
(print_return_value): Rwerite to implement
RETURN_VALUE_ABI_RETURNS_ADDRESS.
* values.c (using_struct_return): Check for inequality to
RETURN_VALUE_REGISTER_CONVENTION instead of equality to
RETURN_VALUE_STRUCT_CONVENTION.
* i386-tdep.c (i386_return_value): Implement
RETURN_VALUE_ABI_RETURNS_ADDRESS.
* values.c (register_value_being_returned): Update comments. Use
"gdbarch_return_value" when available.
(using_struct_return): Ditto.
(set_return_value): Ditto. Use "gdbarch_return_value" when
available.. Print a warning, and not an error, when an unhandled
return type is encountered.
* infcmd.c: Include "gdb_assert.h".
(print_return_value): When gdbarch_return_value_p, and using
struct return, assume that the value is not available.
* defs.h (return_value_convention): Define.
* gdbarch.sh (gdbarch_return_value): New predicate method.
* gdbarch.h, gdbarch.c: Re-generate
* ppc-sysv-tdep.c (return_value_convention): Delete definition.
Index: doc/ChangeLog
2003-10-20 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Document
gdbarch_return_value. Add cross references from
USE_STRUCT_CONVENTION, EXTRACT_RETURN_VALUE, and
STORE_RETURN_VALUE, and from/to EXTRACT_STRUCT_VALUE_ADDRESS.
* structs.h (value_being_returned): Add a struct_addr argument.
* infcall.c (call_function_by_hand): Pass struct_addr to
value_being_returned.
* infcmd.c (print_return_value): Pass zero as struct_addr.
* values.c (value_being_returned): If struct_addr is passed,
use it instead of trying to recover it from the inferior.
* infrun.c (stop_soon_quietly): Make it an enum, to better
override the default behavior of handle_inferior_event.
(clear_proceed_status): Update uses of stop_soon_quietly to
reflect that it is now an enum.
(start_remote): Ditto.
(handle_inferior_event): Change logic a bit if stop_soon_quietly
is set to handle the new GNU/Linux kernel behavior for
attach/sigstop. Update uses of stop_soon_quietly.
* inferior.h (enum stop_kind): New enum.
* infcmd.c (attach_command): Use STOP_QUIETLY_NO_SIGSTOP.
Reset normal handle_inferior_event behavior, afterwards.
* fork-child.c (startup_inferior): Update.
* alpha-tdep.c (heuristic_proc_start): Update.
* solib-svr4.c (svr4_solib_create_inferior_hook): Update.
* solib-sunos.c (sunos_solib_create_inferior_hook): Update.
* solib-osf.c (osf_solib_create_inferior_hook): Update.
* solib-irix.c (irix_solib_create_inferior_hook): Update.
* remote-vx.c (vx_create_inferior): Update.
* mips-tdep.c (heuristic_proc_start): Update.
* breakpoint.c (until_break_command): Add new argument. Use it to
decide whether to stop only at the current frame or not.
* breakpoint.h (until_break_command): Update prototype.
* infcmd.c (until_command): Add new argument to until_break_command
call.
(advance_command): New function.
(_initialize_infcmd): Update help string for 'until' command.
Add new 'advance' command.
* infcmd.c (run_stack_dummy): Create a frame ID directly and then
pass that to set_momentary_breakpoint. Move comments to where they
belong.
* frame.h (set_current_frame): Delete declaration.
* frame.c (set_current_frame): Delete function.
checks whether the target has any registers and whether there is a
selected frame up, such that it is also used if a target provides
multi-arch definitions of these functions.
* infcmd.c: Include "reggroups.h" and <ctype.h>.
(print_float_info): Print registers in float_reggroup.
(print_vector_info): Print registers in vector_reggroup.
(default_print_registers_info): When all, print registers in
all_reggroup. Otherwize, print registers in general_reggroup.
(registers_info): Rewrite. Add support for register groups.
Eliminate a goto.
* infcmd.c (interrupt_target_command_wrapper): Delete.
(interrupt_target_command): Make non static.
(nofp_registers_info): Make static.
* stack.c (return_command_wrapper): Delete.
(return_command): Make non static.
* frame.c: Include "gdb_string.h" and "builtin-regs.h".
(frame_map_regnum_to_name): New function.
(frame_map_name_to_regnum): New function.
* frame.h (frame_map_name_to_regnum): Declare.
(frame_map_regnum_to_name): Declare.
* builtin-regs.c (builtin_reg_map_regnum_to_name): New function.
* builtin-regs.h (builtin_reg_map_regnum_to_name): Declare.
* parse.c: Do not include "builtin-regs.h".
(target_map_name_to_register): Delete function.
(write_dollar_variable): Use frame_map_name_to_regnum.
* parser-defs.h (target_map_name_to_register): Delete declaration.
* expprint.c: Include "frame.h".
(print_subexp): Use frame_map_regnum_to_name.
* eval.c (evaluate_subexp_standard): Use frame_map_regnum_to_name.
* infcmd.c (registers_info): Use frame_map_name_to_regnum.
2002-09-25 Andrew Cagney <cagney@redhat.com>
* gdb.base/pc-fp.exp, gdb.base/pc-fp.c: New test.
* infcmd.c (do_registers_info): Print vector registers in hex
format only.
(print_vector_info): Check that printing registers
makes sense.
(print_float_info): Ditto.
deprecated_grub_regcache_for_registers.
* values.c: Include "regcache.h".
(value_being_returned): Update. Use
deprecated_grub_regcache_for_registers to extract the register
buffer address.
* value.h (value_being_returned): Change ``retbuf'' parameter to a
``struct regcache''.
* Makefile.in (values.o): Add dependency on $(regcache_h).
* inferior.h (run_stack_dummy): Change type of second parameter to
a ``struct regcache''.
* valops.c (hand_function_call): Change type of retbuf to ``struct
regcache''. Allocate using regcache_xmalloc, clean using
make_cleanup_regcache_xfree.
* infcmd.c (run_stack_dummy): Update. Use
regcache_cpu_no_passthrough instead of memcpy to copy the buffer.
* regcache.c (do_regcache_xfree): New function.
(make_cleanup_regcache_xfree): New function.
* regcache.h (make_cleanup_regcache_xfree): Declare.
regcache'''.
(xmalloc_inferior_status): Delete function.
(free_inferior_status): Delete function.
(normal_stop): Use regcache_cpy.
(struct inferior_status): Change type of fields ``stop_registers''
and ``registers'' to ``struct regcache''.
(write_inferior_status_register): Use regcache_write.
(save_inferior_status): Instead of calling
xmalloc_inferior_status, allocate the inf_status buffer directly.
Use regcache_dup_no_passthrough and regcache_dup to save the
buffers.
(restore_inferior_status): Use regcache_xfree and regcache_cpy.
Replace the stop_registers regcache instead of overriding it. Use
regcache_xfree. Instead of calling free_inferior_status, xfree
the buffer directly.
(discard_inferior_status): Use regcache_xfree. Instead of calling
free_inferior_status, xfree the buffer directly.
(build_infrun): Use regcache_xmalloc.
(_initialize_infrun): Delete redundant call to build_infrun.
* Makefile.in (infcmd.o): Add $(regcache_h).
* infcmd.c: Include "regcache.h".
(run_stack_dummy): Use deprecated_grub_regcache_for_registers to
obtain the address of `stop_registers' register buffer.
(print_return_value): Ditto.
* inferior.h (struct regcache): Add opaque declaration.
(stop_registers): Change variable's declared type to ``struct
regcache''.
is up-to-date before running the program, not just when a program
exits.
* testsuite/gdb.base/reread.exp: Check that GDB properly re-reads the
executable file when it changes while no inferior is running.
`enable' and `disable' identifiers, because some platforms define
in their system headers symbols with global scope that go by those
names.
* breakpoint.h (enum enable_state): Rename from `enum enable'.
Also rename all the enum members to have the "bp_" prefix.
(struct breakpoint): Rename the `enable' member to `enable_state'.
(enum bpdisp): Rename all members to have the "disp_" prefix.
* breakpoint.c: All users of `enum enable' and `enum bpdisp'
changed.
(args_for_catchpoint_enable): Rename the `enable' member to
`enable_p'. All users changed.
* tracepoint.h (enum enable): Remove.
(struct tracepoint): The member `enabled' is now `int enabled_p'.
* tracepoint.c: All users of the `enabled' member changed.
* printcmd.c (struct display): The `status' member is now an int.
* memattr.h (struct mem_region): Rename the `status' member to
`enabled_p'.
(enum enable): Remove.
* memattr.c: Change all users of the `status' member of struct
mem_region to use `enabled_p' instead.
* infcmd.c (run_stack_dummy): Use disp_del instead of del.
* go32-nat.c: Remove the kludgey work-around for conflicts between
<dos.h> and "breakpoint.h".
* tui/tuiSourceWin.c: Use disp_del instead of del.
* tui/tuiSource.c: Use disp_del instead of del.
* tui/tuiDisassem.c: Use disp_del instead of del.
(line_completion_function): If we are completing on locations,
back up the start of word pointer past all characters which can
appear in a location spec.
(location_completer): New function.
* completer.h: Add prototype for location_completer.
* symtab.c (make_source_files_completion_list)
(add_filename_to_list, not_interesting_fname): New functions.
(filename_seen): New function, body extracted from
output_source_filename.
(output_source_filename): Call filename_seen to check if the file
was already printed.
(make_symbol_completion_list): If TEXT includes a
double-quoted string, return an empty list, not NULL.
(make_file_symbol_completion_list): New function, similar to
make_symbol_completion_list but with an additional argument
SRCFILE.
* symtab.h (make_file_symbol_completion_list)
(make_source_files_completion_list): Add prototypes.
* breakpoint.c (_initialize_breakpoint): Make location_completer
be the completion function for all commands which set breakpoints
and watchpoints.
(top-level): #include "completer.h".
* tracepoint.c (_initialize_tracepoint): Make location_completer
be the completion function for the "trace" command.
(top-level): #include "completer.h".
* printcmd.c (_initialize_printcmd): Make location_completer be
the completion function for the "print", "inspect", "call", and
"disassemble" commands.
(top-level): #include "completer.h".
* infcmd.c (_initialize_infcmd): Make location_completer be the
completion function for the "go", "jump", and "until" commands.
(top-level): #include "completer.h".
already defined.
From 2000-08-25 Stephane Carrez <Stephane.Carrez@worldnet.fr>:
* stabsread.c (define_symbol): A parameter ('R'), a local ('r'),
or a reference ('a') can be in a pseudo register.
* infcmd.c (do_registers_info): Must take into account the pseudo
registers to print their value.
(registers_info): Likewise.
* stack.c (frame_info): Likewise.
* frame.h (SIZEOF_FRAME_SAVED_REGS): Save the pseudo registers.
(_initialize_demangler): Fill demangling_style_names with the
names of known demangling styles from libiberty_demanglers[]. Use
add_set_enum_cmd instead of add_set_cmd, to get completion on
demangling style names.
* proc-api.c (_initialize_proc_api): Make `procfs-file' use
file-name completion.
* remote-rdi.c (_initialize_remote_rdi): Ditto for `rdilogfile'.
* solib.c (_initialize_solib): Ditto for `solib-search-path' and
`solib-absolute-prefix'.
* tracepoint.c (_initialize_tracepoint): Ditto for
`save-tracepoints'.
* win32-nat.c (_initialize_inftarg): Ditto for `dll-symbols'.
* cli/cli-cmds.c (init_cli_cmds): Make `shell' and `make' use
file-name completion.
* infcmd.c (_initialize_infcmd): Make the following commands use
the file-name completer: `tty', `args', `path', `paths', and
`run'.
Submitted by Paul Hilfinger (hilfingr@gnat.com)
and Andrei Petrov (and@genesyslab.com).
* findvar.c: Buffers of size MAX_REGISTER_RAW_SIZE or REGISTER_BYTES
must be allocated dynamically, since these are no longer constants.
* infcmd.c: Ditto.
* regcache.c: Ditto.
* remote.c: Ditto.
* sol-thread.c: Ditto.
* valops.c: Ditto.
* config/sparc/sun4sol2.mh (MH_CFLAGS): Add -I/usr/include/v9, as a
work-around for a missing Sun header file in solaris for sparc64.
Fix double parsing of filenames passed as command line arguments
to GDB (causes weird handling of escape characters).
Also, remove dependencies on the CLI from libgdb.
* call-cmds.h: Remove declaration of exec_file_command().
* gdbcore.h: Remove declaration of exec_file_command().
Add declarations for exec_open() and exec_file_clear().
* symfile.h: Add declarations for symbol_file_add_main() and
symbol_file_clear().
* exec.c (exec_open): New function. Implements to_open for exec
targets.
(exec_file_clear): New function. Makes GDB forget about a previously
specified executable file.
(exec_file_attach): Move parsing of arguments from here ...
(exec_file_command): ... to here.
(init_exec_ops): Use exec_open(), not exec_file_command() to
implement to_open for exec targets.
* symfile.c (symbol_file_add_main): New function. Call symbol_file_add() with default values. Used when the file name has already been parsed.
(symbol_file_clear): New function. Makes GDB forget about previously
read symbols.
(symbol_file_command): Call the above function instead of inline code.
* main.c: Include "symfile.h" and "gdbcore.h" instead of the deprecated
"call-cmds.h".
(captured_main): Call exec_file_attach() and symbol_file_add_main()
instead of exec_file_command() and symbol_file_command().
(captured_main): Add comment.
* corefile.c: Include "symfile.h".
(core_file_command): Call symbol_file_add_main() instead of
symbol_file_command().
(reopen_exec_file): Call exec_open() instead of exec_file_command().
* infcmd.c: Include "symfile.h".
(attach_command): Call symbol_file_add_main() instead of
symbol_file_command().
* infrun.c: Remove comment about the inclusion of "symfile.h",
not any longer appropriate.
(follow_exec): Call symbol_file_add_main() instead of
symbol_file_command().
* remote-es.c: Include "symfile.h".
(es1800_load): Call symbol_file_add_main() instead of
symbol_file_command().
* remote-vx.c: Remove comment about the inclusion of "symfile.h",
not any longer appropriate.
(vx-wait): Call symbol_file_add_main() instead of
symbol_file_command().
* solib-svr4.c (open_symbol_file_object): Call symbol_file_add_main()
instead of symbol_file_command().
* v850ice.c (ice_file): Call exec_open(), exec_file_attach() and
symbol_file_add_main() instead of exec_file_command() and
symbol_file_command().
* Makefile.in: Update dependencies.
* infcmd.c (get_inferior_args, set_inferior_args): Accessor functions
for the inferior program arguments.
(run_command, run_no_args_command, init_infcmd)): Use accessor
functions to set the inferior program arguments.
* inferior.h: Add definitions to the accessor functions above.
step_over_calls.
* infcmd.c (step_over_calls): Change definition.
(step_1): Use new enum values in relation to step_over_calls.
(step_once): Ditto.
(until_next_command): Ditto.
* infrun.c (clear_proceed_status): Ditto.
(handle_inferior_event): Ditto.
* inferior.h (step_stop_if_no_debug): New variable.
* infrun.c (step_stop_if_no_debug): Declare.
(handle_inferior_event): Stop the step command if we entered a function without
line info.
(_initialize_infrun): New command 'set step-mode' to control the step command.
* infcmd.c (step_once): Switch to stepi mode if there is no line info
(and switching is enabled).
* defs.h (struct continuation_arg): make 'data' a union, to avoid
casting problems when int and pointer are not the same size.
* event-top.c (command_handler): use data as a union.
(command_line_handler_continuation): ditto.
* infcmd.c (step_1_continuation): use data as a union. Re-indent.
(step_once): ditto. (finish_command_continuation): ditto.
(finish_command): ditto.
* breakpoint.c (until_break_command): use data as a union.
(until_break_command_continuation): ditto.
* utils.c (add_intermediate_continuation): fix typo in comment.
* infcmd.c (run_stack_dummy): Do not pop frame on random signal.
* valops.c (_initialize_valops): Add command "set unwindonsignal".
(hand_function_call): Test for unwind_on_signal and act accordingly.
returns a possibly modified pid.
* inftarg.c (ptrace_him): Now returns pid;
* m3-nat.c (m3_trace_him): Now returns pid;
* infcmd.c (run_command): Minor cleanup.
* infrun.c (wait_for_inferior): Add another check for one_stepped
near where we read the pc to avoid erroneously setting
random_signal for multi-threaded support.
* procfs.c: Add support for Solaris LWPs. Remove def of
LOSING_POLL. Many cleanups... Several workarounds for Solaris
lossage. System call entry and exit are now handled by
dynamically registered handlers.
* (syscallname): Don't barf when handed an unknown syscall
number.
* (info_proc_syscalls): Ditto.
* sol-thread.c: New file. Implements Solaris thread support.
* symfile.c (symbol_file_add): Add call to target_new_objfile to
notify target-dependent code about new symbol tables.
* (clear_symtab_users): Call target_new_objfile to notify it of
the removal of all symbol tables.
* target.c (push_target): Make sure that to_close is non-zero
before calling it.
* target.h (target_new_objfile): Provide default.
* config/alpha/nm-osf2.h: Define LOSING_POLL because this version
of OSF can't hack using poll with /proc.
* config/sparc/nm-sun4sol2.h (target_new_objfile): Define to be
sol-thread-new-objfile.
* config/sparc/sun4sol2.mh: Add sol-thread.o to NATDEFFILES, and
add libthread_db.so.1 to NAT_CLIBS.
* config/sparc/tm-sun4sol2.h: Define PIDGET, TIDGET, and
target_pid_to_str.
storage leaks.
(breakpoint_re_set_one): Fix b->exp, b->val, b->cond storage leaks.
* infcmd.c (run_command), solib.c (locate_base): Check for
target_has_execution in addition to inferior_pid, a core file
from a threaded program is yielding a non-zero inferior_pid.
* sparc-tdep.c (get_saved_register): Handle window registers
in a dummy frame correctly.
before testing against reg_ptr.
* eval.c (evaluate_subexp_standard): Cast type of
TYPE_FN_FIELD_VOFFSET to int.
* findvar.c (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer): Cast type of sizeof to int.
* values.c (unpack_field_as_long, modify_field): Ditto.
* valops.c (value_assign, call_function_by_hand): Ditto.
* infcmd.c (do_registers_info): Ditto.
* ser-tcp.c (tcp_open): Ditto
* remote.c (putpkt): Ditto.
* dcache.c (dcache_peek): Ditto.
* dcache.c (dcache_poke): Ditto.
* m2-exp.y (yylex): Ditto.
* gnu-regex.c (re_match_2): Ditto.
* f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef
out unused macro definition and variables.
* inftarg.c (proc_wait): Move from main.c to here, and make static.
* valprint.c (val_print_string): Change bufsize from int to unsigned.
* main.c (wait.h): Include
* top.c (command_line_input): Remove unused variable "c".
* f-typeprint.c (f_type_print_varspec_prefix): Add missing enum
value TYPE_CODE_TYPEDEF to switch statement.
(f_type_print_varspec_suffix): Add missing enum value
TYPE_CODE_TYPEDEF to switch statement.
* ch-exp.c (parse_primval): Add remaining enumeration values to
switch statement, with no specific action.
(ch_lex): Add LOC_UNRESOLVED in switch statement.
(pushback_token): Ifdef out, since code using it is ifdef'd out.
* stabsread.c (cleanup_undefined_types): Remove unused label
"badtype".
* objfiles.h (print_symbol_bcache_statistics): Add prototype.
* maint.c (objfiles.h): Include.
(maintenance_print_statistics): Remove unused variable "temp".
* minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove
unused variable "found_file_symbol".
* m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch.
* language.c (lang_bool_type): Use existing function local type
variable rather than create block local variables.
* solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS.
* infptrace.c (wait.h, command.h): Include.
* ser-tcp.c (gdb_string.h): Include
* i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR.
(i386_get_frame_setup): Change "pc" from int to CORE_ADDR.
* command.c (complete_on_enum): Make assignment used as truth value
explictly check against NULL.
(wait.h): Include.
* infrun.c (wait_for_inferior): Ifdef out prologue_pc since code
that uses it is ifdef'd out.
* parser-defs.h: Add prototype for write_dollar_variable.
* infrun.c: Add prototype for write_pc_pid.
* breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs.
* symmisc.c (bcache.h): Include.
* bcache.h: Add prototype for print_bcache_statistics.
* symfile.c: Include <time.h>.
* printcmd.c (print_scalar_formatted): Change len to unsigned int.
* valarith.c (value_equal): Cast result of TYPE_LENGTH to int.
* valarith.c (value_binop): Change result_len, promoted_len1,
and promoted_len2 to unsigned int.
* valarith.c (value_subscripted_rvalue): Change elt_offs and
elt_size to unsigned int.
* valops.c (value_array): Change typelength to unsigned int.
(destructor_name_p): Change len to unsigned int.
* scm-lang.h (scm_parse): Add prototype for scm_unpack.
* symfile.c (decrement_reading_symtab): Change return type to void.
* valarith.c (value_subscript): Remove unused variable "word".
(value_subscript): Remove unused variable "tint".
* valops.c (auto_abandon): Ifdef out, since code using it is also
ifdef'd out.
* eval.c (init_array_element): Remove unused variable "val".
* Makefile.in (values.o): Depends on scm-lang.h.
(command.o): Depends upon wait_h.
(ser-tcp.o): Depends upon gdb_string.h.
(infptrace.o): Depends upon wait_h and command_h.
(maint.o): Depends on objfiles.h and symfile.h.
* values.c (allocate_repeat_value): Remove unused variable
"element_type".
(scm-lang.h): Include.
* breakpoint.c (create_longjmp_breakpoint): Enclose in
GET_LONGJMP_TARGET define, unused otherwise.
* config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint,
i386_remove_watchpoint and i386_stopped_by_watchpoint.
* sh-tdep.c (set processor): New command to set specific
processor type.
(sh_reg_names, sh3_reg_names): Arrays of register names for
SH and SH3 processors.
(sh_set_processor_type): New function.
* sh3-rom.c (sh3_open): Call it.
(sh3_regname): Add names of all the bank registers.
(sh3_supply_register): Clean up formatting.
* config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include
bank registers.
(REGISTER_NAMES): Add names of bank registers.
(FP15_REGNUM): Define.
(REGISTER_VIRTUAL_TYPE): Use it.
* monitor.c: Clean up some comments.
collision in C++.
* infcmd.c (path_command): Use empty string if PATH name not set.
* i386-tdep.c (skip_trampoline_code): New function.
* srec.c: Renamed dsrec.c to avoid filename collision.
* Makefile.in: Cope with renaming.
Update copyrights to 1996.
solib.c to symfile.c.
* solib.c: ditto.
* symfile.h: Add extern declaration of the above mentioned variable.
* infcmd.c: Take out extern declaration, since it's in symfile.h.
* infrun.c (handle_command, signals_info), infcmd.c
(signal_command): Use it.
* infrun.c, infcmd.c: Update docstrings for these commands.
* target.h (enum target_signal), target.c (signals), target.c
(target_signal_from_host, target_signal_to_host): Add
TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx.
* config/tm-lynx.h: Define signal numbers for realtime events.
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
* breakpoint.h (hit_count): New breakpoint field.
* breakpoint.c (show_breakpoint_hit_counts): New variable.
(clear_breakpoint_hit_counts): New function.
(bpstat_stop_status): Increment the hit count.
(breakpoint_1): Display the hit count.
* infcmd.c (run_command): Reset breakpoint hit counts.
* target.c (generic_mourn_inferior): Don't clear ignore counts if
displaying hit counts.
struct target_waitstatus. Change status argument to target_wait to
be struct target_waitstatus * instead of int *.
* target.h, infrun.c, all targets: Change type of signal arguments
to resume(), proceed(), and target_resume() from int to enum
target_signal.
* All targets (*_wait, *_resume): Change accordingly.
* infcmd.c (program_info, signal_command), throughout infrun.c,
* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
signal code stuff right with the new signals would be non-trivial).
* inferior.h (stop_signal): Make it enum target_signal not int.
* target.c, target.h (target_signal_to_string, target_signal_to_name,
target_signal_from_name): New functions.
* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
store_waitstatus): New functions.
* procfs.c (procfs_notice_signals): Use them.
* i960-tdep.c (i960_fault_to_signal): New function, to replace
print_fault.
* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
* symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES.
Clean up problems with targets and hosts that have 64 bit longs
and pointers and 32 bit ints.
* breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c,
ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c,
expprint.c, gdbtypes.c, infcmd.c, language.c, language.h,
m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h,
printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Change all printf formats from %x to %lx if outputting an address.
Change la_*_format to use long format.
local_hex_string, local_hex_string_custom now take an unsigned long
argument, change all callers.
* coffread.c (read_coff_symtab): Remove superfluous cast for
complaint output.
* dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int.
* findvar.c, value.h (write_register): Change register value to long.
* gdbtypes.h (struct type): Change `bitsize' to long as
TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer.
* inferior.h (struct inferior_status): Change type of stop_pc to
CORE_ADDR.
* language.h (local_octal_string, local_octal_string_custom):
Remove prototype, the functions are neither defined nor used.
* mipsread.c (parse_symbol): Use temporary variable for bitsize as
f->bitsize is a long now.
* objfiles.c (add_to_objfile_sections, build_objfile_section_table):
Use unsigned long casts instead of int for abusing sections_end
pointer as integer.
* stack.c (parse_frame_specification): Change type of `args' to
CORE_ADDR for SETUP_ARBITRARY_FRAME.
* printcmd.c (make_vasize): Allow redefinition via MAKEVA_SIZE.
* mipsread.c (parse_type): Alpha cc now supports the t->continued
bit, update algorithm to match the way the compiler uses it.
Some of the following is in #ifdef CALL_DUMMY_BREAKPOINT_OFFSET.
* breakpoint.h (enum bptype): Add bp_call_dummy.
(struct bpstat_what): Add call_dummy field.
* infrun.c (wait_for_inferior): Deal with it.
* breakpoint.c (bpstat_what): Deal with call dummy breakpoint.
* infcmd.c (run_stack_dummy): Set the call dummy breakpoint.
* config/sparc/tm-sparc.h: Define CALL_DUMMY_BREAKPOINT_OFFSET.
besides the dummy, return 1 rather than calling error().
Let caller print the error message. Remove name argument.
* valops.c (call_function_by_hand): Deal with changes to calling
sequence of run_stack_dummy. Discard restore_inferior_status cleanup
if run_stack_dummy returns 1.
step_resume_break_address with step_resume_breakpoint (now local
to wait_for_inferior).
({insert,remove}_step_breakpoint): Remove.
(wait_for_inferior): Set step resume break with
set_momentary_breakpoint. Test hitting it with bpstat_stop_status
and bpstat_what (stop_step_resume_break removed).
* breakpoint.{h,c}, infrun.c: Return value from bpstat_what now struct
which includes previous return value as main_action, and a step_resume
bit.
* breakpoint.c (delete_breakpoint): If breakpoint was inserted, and
there is another breakpoint there, insert it.
* infrun.c (wait_for_inferior): Rearrange the spaghetti a bit. Use
a few more gotos.
Various: Clean up and add comments.
Change error message in (another) attempt to make it comprehensible.
* valops.c (call_function_by_hand): Pass name to run_stack_dummy.
* symtab.h: Declare demangle and asm_demangle since macros use them.
signal_handler_caller.
* tm-68k.h (FRAME_{CHAIN,SAVED_PC}): Deal with sigtramp.
* tm-hp300bsd.h: Define SIGTRAMP_{START,END} not IN_SIGTRAMP.
* inferior.h (IN_SIGTRAMP): Definition moved from infrun.c.
Use SIGTRAMP_START if defined.
* infcmd.c (step_1): Use SIGTRAMP_{START,END} if needed.
* infrun.c (wait_for_inferior): Check IN_SIGTRAMP before SKIP_PROLOGUE.
frame. Use find_return_regnum to find the caller.
* (find_unwind_entry): New routine to locate stack frame info
associated with a procedure. This looks in the $UNWIND_START$
section in the SOM file.
* (find_return_regnum): New routine. Uses find_unwind_entry() to
figure out where the caller's return address is stored.
* (find_proc_framesize): New routine. Uses find_unwind_entry()
to figure out the frame size for a procedure.
* (saved_pc_after_call): New routine, moved from tm-hppa.h.
* (init_extra_frame_info): New routine. Corrects PC and FP for
outermost frame if necessary.
* (frame_chain): New routine, moved from tm-hppa.h.
* (skip_trampoline_code): Handle computed function calls (ie:
calls from $$dyncall).
* (unwind_command): Temporary support function to allow user
to control/observe aspects of the unwind (stack frame) info.
* infcmd.c (read_pc): (Temporary), put a hack in to see if the PC
was in a system call, if so, then read the PC from r31.
* tm-hppah.h (SKIP_TRAMPOLINE_CODE, IN_SOLIB_TRAMPOLINE): Deal
with extra arg for skip_trampoline_code().
* (INIT_EXTRA_FRAME_INFO): Define to point at subr (see above).
* (FRAME_CHAIN, FRAME_CHAIN_VALID): Turn into real subroutines.
* tm-hppa.h (SAVED_PC_AFTER_CALL): Turn into real subroutine.
* defs.h (demangle_and_match): Remove prototype.
* dwarfread.c (STREQ, STREQN): Remove macros, replaced with STREQ
and STREQN defined in defs.h.
* dwarfread.c (set_cu_language): For completely unknown languages,
try to deduce the language from the filename. Retain behavior
that for known languages we don't know how to handle, we use
language_unknown.
* dwarfread.c (enum_type, symthesize_typedef): Initialize language
and demangled name fields in symbol.
* dwarfread.c, mipsread.c, partial-stab.h: For all usages of
ADD_PSYMBOL_TO_LIST, add language and objfile parameters.
* dwarfread.c (new_symbol): Attempt to demangle C++ symbol names
and cache the results in SYMBOL_DEMANGLED_NAME for the symbol.
* elfread.c (STREQ): Remove macro, use STREQ defined in defs.h.
Replace usages throughout.
* elfread.c (demangle.h): Include.
* elfread.c (record_minimal_symbol): Remove prototype and function.
* gdbtypes.h, symtab.h (B_SET, B_CLR, B_TST, B_TYPE, B_BYTES,
B_CLRALL): Moved from symtab.h to gdbtypes.h.
* infcmd.c (jump_command): Remove code to demangle name and add
it to a cleanup list. Now just use SYMBOL_DEMANGLED_NAME.
* minsyms.c (demangle.h): Include.
* minsyms.c (lookup_minimal_symbol): Indent comment to match code.
* minsyms.c (install_minimal_symbols): Attempt to demangle symbol
names as C++ names, and cache them in SYMBOL_DEMANGLED_NAME.
* mipsread.c (psymtab_language): Add static variable.
* stabsread.c (demangle.h): Include.
* stabsread.c (define_symbol): Attempt to demangle C++ symbol
names and cache them in the SYMBOL_DEMANGLED_NAME field.
* stack.c (return_command): Remove explicit demangling of name
and use of cleanups. Just use SYMBOL_DEMANGLED_NAME.
* symfile.c (demangle.h): Include.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Fix
to match macros in symfile.h and allow them to be compiled
if INLINE_ADD_PSYMBOL is not true.
* symfile.h (INLINE_ADD_PSYMBOL): Default to true if not set.
* symfile.h (ADD_PSYMBOL_*): Add language and objfile parameters.
Add code to demangle and cache C++ symbol names. Use macro form
if INLINE_ADD_PSYMBOL is true, otherwise use C function form.
* symmisc.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Remove, also defined in symfile.c, which we already fixed.
* symtab.c (expensive_mangler): Remove prototype and function.
* symtab.c (find_methods): Remove physnames parameter and fix
prototype to match.
* symtab.c (completion_list_add_symbol): Name changed to
completion_list_add_name.
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): New macro, adds both
the normal symbol name and the cached C++ demangled name.
* symtab.c (lookup_demangled_partial_symbol,
lookup_demangled_block_symbol): Remove prototypes and functions.
* symtab.c (lookup_symbol): Remove use of expensive_mangler,
use lookup_block_symbol instead of lookup_demangled_block_symbol.
Remove code to try demangling names and matching them.
* symtab.c (lookup_partial_symbol, lookup_block_symbol):
Fix to try matching the cached demangled name if no match is
found using the regular symbol name.
* symtab.c (find_methods): Remove unused physnames array.
* symtab.c (name_match, NAME_MATCH): Remove function and macro,
replaced with SYMBOL_MATCHES_REGEXP from symtab.h.
* symtab.c (completion_list_add_symbol): Rewrite to use cached
C++ demangled symbol names.
* symtab.h: Much reformatting of structures and such to add
whitespace to make them more readable, and make them more
consistent with other gdb structure definitions.
* symtab.h (general_symbol_info): New struct containing fields
common to all symbols.
* symtab.h (SYMBOL_LANGUAGE, SYMBOL_DEMANGLED_NAME,
SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME, SYMBOL_MATCHES_NAME,
SYMBOL_MATCHES_REGEXP, MSYMBOL_INFO, MSYMBOL_TYPE): New macros.
* symtab. (struct minimal_symbol, struct partial_symbol, struct
symbol): Use general_symbol_info struct.
* utils.c (demangle_and_match): Remove, no longer used.
* valops.c (demangle.h): Include.
* xcoffexec.c (eq): Remove macro, replace usages with STREQ.
* blockframe.c, breakpoint.c, c-exp.y, c-valprint.c, dbxread.c,
infcmd.c, m2-exp.y, minsyms.c, objfiles.h, solib.c, stack.c,
symmisc.c, symtab.c, valops.c: Replace references to minimal
symbol fields with appropriate macros.
* breakpoint.c, buildsym.c, c-exp.y, c-typeprint.c, c-valprint.c,
coffread.c, command.c, convex-tdep.c, cp-valprint.c, dbxread.c,
demangle.c, elfread.c, energize.c, environ.c, exec.c,
gdbtypes.c, i960-tdep.c, infrun.c, infrun-hacked.c, language.c,
main.c, minsyms.c, mipsread.c, partial-stab.h, remote-es1800.c,
remote-nindy.c, remote-udi.c, rs6000-tdep.c, solib.c, source.c,
sparc-pinsn.c, stabsread.c, standalone.c, state.c, stuff.c,
symfile.c, symmisc.c, symtab.c, symtab.h, tm-sysv4.h,
tm-ultra3.h, values.c, xcoffexec.c, xcoffread.c: Replace strcmp
and strncmp usages with STREQ, STREQN, or STRCMP as appropriate.
* breakpoint.c, buildsym.c, c-typeprint.c, expprint.c, findvar.c,
mipsread.c, printcmd.c, source.c, stabsread.c, stack.c,
symmisc.c, tm-29k.h, valops.c, values.c: Replace SYMBOL_NAME
references with SYMBOL_SOURCE_NAME or SYMBOL_LINKAGE_NAME as
appropriate.
* buildsym.c (start_subfile, patch_subfile_names): Default the
source language to what can be deduced from the filename.
* buildsym.c (end_symtab): Update the source language in the
allocated symtab to match what we have been using.
* buildsym.h (struct subfile): Add a language field.
* c-typeprint.c (c_print_type): Remove code to do explicit
demangling.
* dbxread.c (psymtab_language): Add static variable.
* dbxread.c (start_psymtab): Initialize psymtab_language using
deduce_language_from_filename.
* Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c,
m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c.
* Makefile.in (HFILES): Add valprint.h.
* Makefile.in (OBS): Add typeprint.o, c-typeprint.o,
m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o.
* typeprint.c, typeprint.h: New files for language independent
type printing functions.
* c-typeprint.c, m2-typeprint.c: New files for language dependent
type printing functions and definitions.
* valprint.h: New include file for language independent value
printing definitions.
* c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language
dependent value printing functions.
* c-exp.y (production ptype): Add range_type variable and use new
create_range_type function.
* c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab),
infcmd.c (path_var_name), language.c (unk_op_print_tab),
m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent
"const static" to ANSI-conformant "static const".
* c-exp.y (c_create_fundamental_type): Remove unused nbytes.
* c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type,
and c_val_print.
* c-lang.h (c_print_type, c_val_print): Add prototypes.
* coffread.c (decode_type): Add range_type variable and call to
new create_range_type function.
* complaints.c (complain): Remove unused val variable.
* complaints.c (_initialize_complaints): Make it void.
* convex-tdep.c (value_of_trapped_internalvar): Add range_type
variable and call new create_range_type function.
* defs.h (enum val_prettyprint): Move enum from value.h to here
so we can avoid having to include value.h just for prototypes that
need the enum (thanks ANSI).
* dwarfread.c (struct_type): Local anonymous_size variable is
only used if !BITS_BIG_ENDIAN.
* dwarfread.c (decode_subscript_data_item): Add rangetype
variable and call new create_range_type function.
* elfread.c (elf_symfile_read): Remove unused dbx and text_sect
variables.
* eval.c (evaluate_subexp): Remove unused local variable name
and the statement with no side effects that initializes it.
* expprint.c (print_subexp): Change local_printstr to
LA_PRINT_STRING.
* gdbtypes.c (create_range_type): New function that creates
a range type using code fragments from object file readers as
an example of what has to be initialized.
* gdbtypes.c (create_array_type): Removed index_type, low_bound,
and high_bound parameters, replaced with a single range_type
parameter. Change function body to use passed in range_type
rather than handcrafting one.
* gdbtypes.h (create_range_type): Add prototype.
* gdbtypes.h (create_array_type): Change prototype parameters.
* infrun.c (normal_stop): Remove unused local variables tem and c.
* infrun.c (hook_stop_stub): Return 0 rather than random value.
* language.c (unk_lang_print_type, unk_lang_val_print): Add
stub functions that call error if called.
* language.c (unknown_language_defn, auto_language_defn,
local_language_defn): Add initializers unk_lang_print_type and
unk_lang_val_print.
* language.h (struct language_defn): Reformat for larger
comments, add la_print_type and la_val_print members. Add
LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar
to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING.
* m2-lang.c (m2_create_fundamental_type): Remove unused local
variable nbytes.
* m2-lang.c (m2_language_defn): Add initializers m2_print_type
and m2_val_print.
* m2-lang.h (m2_print_type, m2_val_print): Add prototypes.
* main.c (execute_command): Remove unused local variable cmdlines.
* main.c (echo_command), stabsread.c (read_type), printcmd.c
(clear_displays), symmisc.c (block_depth), values.c
(clear_value_history):
Make testing of truth value of assignment result explicit.
* mipsread.c (upgrade_type): Update FIXME to include future use
of create_range_type.
* printcmd.c (ptype_command, ptype_eval, whatis_command,
whatis_exp, maintenance_print_type): Move prototypes and functions
to new typeprint.c.
* printcmd.c (_initialize_printcmd): Move add_com calls for
ptype_command and whatis_command to new typeprint.c.
* ser-bsd.c (serial_open): Remove unused variable sgttyb.
* source.c (find_source_lines): Local variable c only used
when LSEEK_NOT_LINEAR is defined.
* stabsread.c (read_array_type): Use new create_range_type
function.
* stabsread.c (read_range_type): Add new index_type variable and
call new create_range_type function rather than handcrafting
range types.
* symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE.
* symtab.c (typedef_print usages): Use c_typedef_print, renamed.
* symtab.c (type_print_base usages): Use c_type_print_base.
* symtab.c (type_print_varspec_prefix usages): Use
c_type_print_varspec_prefix.
* symtab.c (type_print_method_args usages): Use
cp_type_print_method_args.
* valprint.c: Completely ripped apart and the fragments used
to create c-valprint.c, cp-valprint.c, m2-valprint.c, and
valprint.h. Remaining stuff is language independent.
* value.h (struct fn_field): Forward declare for prototypes.
* value.h (type_print_1): Remove prototype.
* value.h (enum val_prettyprint): Moved to defs.h.
* value.h (typedef_print): Prototype renamed to c_typedef_print.
* value.h (baseclass_offset): Add prototype.
**** start-sanitize-chill ****
* Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c.
* Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o.
* ch-typeprint.c: New file for language dependent type printing.
* ch-valprint.c: New file for language dependent value printing.
* ch-exp.y (parse_number): Remove prototype and stub function.
* ch-exp.y (decode_integer_literal): Removed unused digits and
temp variables.
* ch-exp.y (convert_float): Completely ifdef out for now.
* ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5),
ch-lang.c (chill_op_print_tab):
Change from ANSI-obsolescent "const static" to ANSI-conformant
"static const".
* ch-exp.y (yylex): Add unhandled storage class enumeration
literals to switch statement for completeness.
* ch-lang.c (chill_create_fundamental_types): Remove unused
nbytes variable. Change dummy type to 2 bytes to match int.
Handle FT_VOID types gratuituously added to chill DWARF by
compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR
type rather than a one byte TYPE_CODE_INT type.
* ch-lang.c (chill_language_defn): Add chill_print_type and
chill_val_print.
* ch-lang.h (chill_print_type, chill_val_print): Add prototypes.
**** end-sanitize-chill ****
Fix from maj@lucid.com.
* remote-udi.c (udi_open): Reset vars so that user can re-run
programs without leaving GDB.
* (many routines): Slightly improve error handling.
* (download): Zero out BSS by longs instead of bytes to avoid
timeouts in real hardware.
* 29k-share/udi/udip2soc.c (UDIDisconnect, UDIKill): Indicate
that connection is no longer in use after shutdown() of socket.
This keeps GDB from dying of a SIGPIPE when you issue multiple
`target udi' commands.
symtab.h, tm-i386v4.h, valprint.c, values.c: Lint.
* breakpoint.c, c-exp.y, coffread.c, command.c, environ.c, eval.c,
findvar.c, infcmd.c, infptrace.c, infrun.c, m2-exp.y, parse.c,
putenv.c, solib.c, sparc-xdep.c, symtab.c, tm-i386v.h, tm-sparc.h,
utils.c, valarith.c, valops.c, valprint.c, values.c:
Replace bcopy() use with memcpy(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* breakpoint.c, buildsym.c, coffread.c, dbxread.c, i386-tdep.c,
ieee-float.c, infcmd.c, sparc-tdep.c, stack.c, symtab.c, symtab.h,
target.c, values.c:
Replace bzero() use with memset(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* i386-tdep.c, main.c, valprint.c:
Replace bcmp() use with memcmp(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
