* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
macros, use local variables for info struct member accesses,
update the type of the variable used to hold the instruction
word.
(print_insn_mips, print_mips16_insn_arg): Likewise.
(print_insn_mips16): Add GET_OP and GET_OP_S local macros, use
local variables for info struct member accesses.
(print_insn_micromips): Add GET_OP_S local macro.
(_print_insn_mips): Update the type of the variable used to hold
the instruction word.
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* archures.c (bfd_mach_mips_octeon2): New macro
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsocteon2): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeon2.
* elfxx-mips.c (_bfd_elf_mips_mach): Support E_MIPS_MACH_OCTEON2.
(mips_set_isa_flags): Add bfd_mach_mips_octeon2.
(mips_mach_extensions): Add bfd_mach_mips_octeon2.
gas:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* tc-mips.c (CPU_IS_OCTEON): Add Octeon2.
(mips_cpu_info_table): Add Octeon2.
* doc/c-mips.texi: Document octeon2 as an acceptable value for -march=.
gas/testsuite:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* gas/mips/mips.exp: Add Octeon2 for an architecture.
Run octeon2 test.
* gas/mips/octeon2.d: New file.
* gas/mips/octeon2.s: New file.
include/opcode:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEON2.
(INSN_OCTEON2): New macro.
(CPU_OCTEON2): New macro.
(OPCODE_IS_MEMBER): Add Octeon2.
opcodes:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add Octeon2.
For "octeon+", just include OcteonP for the insn.
* mips-opc.c (IOCT): Include Octeon2.
(IOCTP): Include Octeon2.
(IOCT2): New macro.
(mips_builtin_opcodes): Add "laa", "laad", "lac", "lacd", "lad",
"ladd", "lai", "laid", "las", "lasd", "law", "lawd".
Move "lbux", "ldx", "lhx", "lwx", and "lwux" up to where the standard
loads are, and add IOCT2 to them.
Add "lbx" and "lhux".
Add "qmac.00", "qmac.01", "qmac.02", "qmac.03", "qmacs.00",
"qmacs.01", "qmacs.01", "qmacs.02" and "qmacs.03".
Add "zcb" and "zcbt".
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips-dis.c (mips_arch_choices): Add Octeon+.
* mips-opc.c (IOCT): Include Octeon+.
(IOCTP): New macro.
(mips_builtin_opcodes): Add "saa" and "saad".
bfd/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* archures.c (bfd_mach_mips_octeonp): New macro.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c (I_mipsocteonp): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeonp.
* elfxx-mips.c (mips_set_isa_flags): Add bfd_mach_mips_octeonp.
(mips_mach_extensions): Add bfd_mach_mips_octeonp.
include/opcodes/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEONP.
(INSN_OCTEONP): New macro.
(CPU_OCTEONP): New macro.
(OPCODE_IS_MEMBER): Add Octeon+.
(M_SAA_AB, M_SAAD_AB, M_SAA_OB, M_SAAD_OB): New enum values.
gas/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* config/tc-mips.c (CPU_IS_OCTEON): New macro function.
(CPU_HAS_SEQ): Change to use CPU_IS_OCTEON.
(NO_ISA_COP): Likewise.
(macro) <ld_st>: Add support when off0 is true.
Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB.
(mips_cpu_info_table): Add octeon+.
* doc/c-mips.texi: Document octeon+ as an acceptable value for -march=.
gas/testsuite/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* gas/mips/mips.exp: Add octeon+ for an architecture.
Run octeon-saa-saad test.
(run_dump_test_arch): For Octeon architectures, also try octeon@.
* gas/mips/octeon-pref.d: Remove -march=octeon from command line.
* gas/mips/octeon.d: Likewise.
* gas/mips/octeon-saa-saad.d: New file.
* gas/mips/octeon-saa-saad.s: New file
* mips-opc.c (synciobdma, syncs, syncw, syncws): Move these
before sync.
(sync): New instruction with 5-bit sync type.
* mips-dis.c (print_insn_args: Add case '1' to print 5-bit values.
(OP_SH_SEQI, OP_MASK_SEQI): New bit mask and shift count for SEQI.
opcodes/
* mips-dis.c (print_insn_args): Handle field descriptor +Q.
* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq,
seqi, sne and snei.
gas/
* config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
(mips_ip): Likewise.
(macro_build): Likewise.
(CPU_HAS_SEQ): New macro.
(macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
gas/testsuite/
* gas/mips/octeon.s, gas/mips/octeon.d: Add tests for seq* and sne*.
* gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: Add tests for seqi
and snei.
* opcodes/mips-dis.c (mips_cp0_names_r3000): New definition.
(mips_cp0_names_r4000): Likewise.
(mips_arch_choices): Link to the above as appropriate.
gas/testsuite/:
* gas/mips/cp0-names-r3000.d: New test for R3000 CP0 symbolic
disassembly.
* gas/mips/cp0-names-r4000.d: New test for R4000/R4400 symbolic
CP0 disassembly.
* mips/mips.exp: Run the new tests.
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
argument and emits the string followed by a comma and then the length of
the string.
(CONST_STRNEQ): New macro. Checks to see if a variable string has a constant
string as its initial characters.
(CONST_STRNCPY): New macro. Copies a constant string to the start of a
variable string.
* bfd-in2.h: Regenerate.
* <remainign files>: Make use of the new macros.
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* config/tc-mips.c (validate_mips_insn): Handling of udi cases.
(mips_immed): New table that records various handling of udi
instruction patterns.
(mips_ip): Adds udi handling.
[ include/opcode/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips.h: Defines udi bits and masks. Add description of
characters which may appear in the args field of udi
instructions.
[ opcodes/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips-opc.c (mips_builtin_opcodes): Add udi instructions
"udi0" to "udi15".
* mips-dis.c (print_insn_args): Adds udi argument handling.
instructions. Define MIPS16_ALL_ARGS and MIPS16_ALL_STATICS for
save/restore encoding of the args field.
* mips16-opc.c: Add MIPS16e save/restore opcodes.
* mips-dis.c (print_mips16_insn_arg): Handle printing of 'm'/'M'
codes for save/restore.
* config/tc-mips.c (mips16_ip): Add handling of 'm' and 'M' codes
for the MIPS16e save/restore instructions.
* gas/mips/mips.exp: Run new save/restore tests.
* gas/testsuite/gas/mips/mips16e-save.s: New test for generating
different styles of save/restore instructions.
* gas/testsuite/gas/mips/mips16e-save.d: New.
(mips_builtin_opcodes): Move "bc0f", "bc0fl", "bc0t", "bc0tl" to the
bottom to avoid opcode collision with "mftr" and "mttr".
Add MT instructions.
* mips-dis.c (mips_arch_choices): Enable INSN_MT for mips32r2.
(print_insn_args): Add supports for +t, +T, !, $, *, &, g operand
formats.
