manual.
(Variables): Don't mention -gdwarf-2. Link to Compilation node.
(Macros): Add a footnote.
(C): Remove paragraph about compiler options.
(C Constants): Mention wide character and string constants.
(C Plus Plus Expressions): Update compiler option advice. Mention
using declarations. Mention ADL. Remove old HP compiler
information.
gdb/
* frame.c (frame_stop_reason_string): Rewrite using
unwind_stop_reasons.def.
* frame.h (enum unwind_stop_reason): Likewise.
* python/py-frame.c (gdbpy_initialize_frames): Likewise.
(gdbpy_frame_stop_reason_string): Use new enum unwind_stop_reason
constants for bound-checking.
* unwind_stop_reasons.def: New file.
* stack.c (backtrace_command_1): Handle UNWIND_FIRST_ERROR as an alias
instead of a distinct value.
doc/
* gdb.texinfo ((Frames In Python): Document
gdb.FRAME_UNWIND_FIRST_ERROR contant.
Fix compatibility with texinfo versions older than 4.12.
* Makefile.in (MAKEINFO): Set to @MAKEINFO@.
(MAKEINFOFLAGS, MAKEINFO_EXTRA_FLAGS, MAKEINFO_CMD): New.
(MAKEHTMLFLAGS): Use MAKEINFO_CMD.
(FLAGS_TO_PASS): Add MAKEINFOFLAGS and MAKEINFO_EXTRA_FLAGS.
* configure: Regenerate.
* configure.ac (MAKEINFO): Find it, from libiberty/configure.ac.
(MAKEINFOFLAGS): Pre-set it to --split-size=5000000.
(MAKEINFO_EXTRA_FLAGS): New test for -DHAVE_MAKEINFO_CLICK.
gdb/doc/
Fix compatibility with texinfo versions older than 4.12.
* Makefile.in (MAKEINFO): Set to @MAKEINFO@.
(MAKEINFOFLAGS, MAKEINFO_EXTRA_FLAGS, MAKEINFO_CMD): New.
(MAKEHTMLFLAGS): Use MAKEINFO_CMD.
(gdb.info, gdbint.info, stabs.info, annotate.info): Use MAKEINFO_CMD.
* gdb.texinfo (Tail Call Frames): Convert @arrow{} to @click, when possible.
Make the conversion conditional on HAVE_MAKEINFO_CLICK, using variables
CALLSEQ1A, CALLSEQ1B, CALLSEQ2A and CALLSEQ2B.
Display @entry parameter values (without references).
* dwarf2expr.c (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
New functions.
* dwarf2expr.h (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
New declarations.
* dwarf2loc.c (dwarf2_find_location_expression): Support location list
entry record.
(dwarf_entry_parameter_to_value, value_of_dwarf_reg_entry)
(value_of_dwarf_block_entry, locexpr_read_variable_at_entry): New
functions.
(dwarf2_locexpr_funcs): Install locexpr_read_variable_at_entry.
(loclist_read_variable_at_entry): New function.
(dwarf2_loclist_funcs): Install loclist_read_variable_at_entry.
* dwarf2read.c (read_call_site_scope): Support also DW_OP_fbreg in
DW_AT_location, call dwarf_block_to_sp_offset for it.
* frame.h (print_entry_values_no, print_entry_values_only)
(print_entry_values_preferred, print_entry_values_if_needed)
(print_entry_values_both, print_entry_values_compact)
(print_entry_values_default, print_entry_values): New declarations.
(struct frame_arg): New field entry_kind.
(read_frame_arg): New parameter entryargp.
* mi/mi-cmd-stack.c (list_arg_or_local): New gdb_assert for
arg->entry_kind. Optionally print the `@entry' suffix.
(list_args_or_locals): New variable entryarg, initialize it.
Initialize also entry_kind of arg and entryarg. Conditionalize
list_arg_or_local for arg, add list_arg_or_local for entryarg. Call
xfree for entryarg.error.
* stack.c (print_entry_values_no, print_entry_values_only)
(print_entry_values_preferred, print_entry_values_if_needed)
(print_entry_values_both, print_entry_values_compact)
(print_entry_values_default, print_entry_values_choices)
(print_entry_values): New variables.
(print_frame_arg): New gdb_assert for arg->entry_kind. Optionally
print the `@entry' suffix, possibly in combination for
print_entry_values_compact.
(read_frame_arg): New parameter entryargp, new variables entryval,
entryval_error and val_equal. Read in also entryargp, respect
print_entry_values, compare the values using val_equal, fill in also
argp->entry_kind (together with entryargp->entry_kind).
(print_frame_args): New variable entryarg, initialize it.
Conditionalize print_frame_arg for arg, add print_frame_arg for
entryarg. Call xfree for entryarg.error.
(_initialize_stack): Call add_setshow_enum_cmd for `entry-values'.
* symtab.h (struct symbol_computed_ops): New field
read_variable_at_entry.
gdb/doc/
Display @entry parameter values (without references).
* gdb.texinfo (Tail Call Frames): Add anchor. Add self tail call
example.
(Print Settings): New description of set print entry-values and show
print entry-values.
gdb/testsuite/
Display @entry parameter values (without references).
* gdb.arch/amd64-entry-value.cc (locexpr, stacktest, data, data2)
(different, validity, invalid): New functions.
(main): Call them.
* gdb.arch/amd64-entry-value.exp: New breakpoints breakhere_locexpr,
stacktest, breakhere_stacktest, different, breakhere_different,
breakhere_validity and breakhere_invalid.
(entry: bt): Update for @entry.
(entry_locexpr: *, entry_stack: *, entry_equal: *, entry_different: *)
(entry_validity: *, entry_invalid: *): Many new tests.
* gdb.base/break.exp
(run until breakpoint set at small function, optimized file): Accept
also the @entry suffix.
* gdb.mi/Makefile.in (PROGS): Add mi2-amd64-entry-value.
* gdb.mi/mi2-amd64-entry-value.c: New files.
* gdb.mi/mi2-amd64-entry-value.exp: New files.
* infrun.c (disable_randomization): New global variable.
(show_disable_randomization): New function.
(set_disable_randomization): Likewise.
(_initialize_infrun): Install set/show disable-randomization
commands.
* linux-nat.c (disable_randomization): Remove.
(show_disable_randomization): Likewise.
(set_disable_randomization): Likewise.
(_initialize_linux_nat): No longer install set/show
disable-randomization commands here.
(linux_nat_supports_disable_randomization): New function.
(linux_nat_add_target): Install it.
* remote.c (PACKET_QDisableRandomization): New enum value.
(remote_protocol_packets): Support QDisableRandomization.
(_initialize_remote): Likewise.
(remote_supports_disable_randomization): New function.
(init_remote_ops): Install it.
(extended_remote_supports_disable_randomization): New function.
(init_extended_remote_ops): Install it.
(extended_remote_disable_randomization): New function.
(extended_remote_create_inferior_1): Call it.
* target.h (struct target_ops): Add to_supports_disable_randomization.
(target_supports_disable_randomization): Add prototype.
* target.c (target_supports_disable_randomization): New function.
(find_default_supports_disable_randomization): Likewise.
(init_dummy_target): Install it.
doc/
* gdb.texinfo (Starting your Program): "set disable-randomization"
is no longer Linux-specific.
(Remote Configuration): Document "set remote
disable-randomization-packet".
(General Query Packets): Document "QDisableRandomization" packet
and add it to "qSupported" list.
gdbserver/
* configure.ac: Check support for personality routine.
* configure: Regenerate.
* config.in: Likewise.
* linux-low.c: Include <sys/personality.h>.
Define ADDR_NO_RANDOMIZE if necessary.
(linux_create_inferior): Disable address space randomization when
forking inferior, if requested.
(linux_supports_disable_randomization): New function.
(linux_target_ops): Install it.
* server.h (disable_randomization): Declare.
* server.c (disable_randomization): New global variable.
(handle_general_set): Handle QDisableRandomization.
(handle_query): Likewise for qSupported.
(main): Support --disable-randomization and --no-disable-randomization
command line arguments.
* target.h (struct target_ops): Add supports_disable_randomization.
(target_supports_disable_randomization): New macro.
PR python/12691: Add the inferior to Python exited event
* python/py-exitedevent.c (create_exited_event_object): Add inferior
to exited_event.
* python/py-event.h (emit_exited_event): Likewise
* python/-inferior.c (python_inferior_exit): Likewise
2011-10-04 Kevin Pouget <kevin.pouget@st.com>
PR python/12691: Add the inferior to Python exited event
* gdb.python/py-events.exp: Test the inferior attribute of exited
event with a fork.
* gdb.python/py-events.py: Print inferior number on exit.
* gdb.python/py-events.c: Fork the inferior.
2011-10-04 Kevin Pouget <kevin.pouget@st.com>
PR python/12691: Add the inferior to Python exited event
* gdb.texinfo (Events In Python): Describe exited inferior attribute.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Ada Tasking Commands): New node.
(GDB/MI Miscellaneous Commands): Add `ada-task-info'
as possible feature returned by the `-list-features'
command.
* tracepoint.c (encode_actions_1): Add case for $_ret.
(validate_actionline): Check for $_ret.
(trace_dump_actions): Ditto.
* ax-gdb.h (gen_trace_for_return_address): Declare.
* ax-gdb.c: Include arch-utils.h.
(gen_trace_for_return_address): New function.
(agent_command): Add return address special case.
* amd64-tdep.c: Include ax.h and ax-gdb.h.
(amd64_gen_return_address): New function.
(amd64_init_abi): Call it.
* i386-tdep.c: Include ax.h and ax-gdb.h.
(i386_gen_return_address): New function.
(i386_init_abi): Call it.
* arch-utils.h (default_gen_return_address): Declare.
* arch-utils.c (default_gen_return_address): New function.
* gdbarch.sh (gen_return_address): New method.
* gdbarch.h, gdbarch.c: Regenerate.
* gdb.texinfo (Tracepoint Action Lists): Document $_ret.
* gdb.trace/collection.exp: Test collection of $_ret.
Handle multiple breakpoint hits in Python interface:
* python/py-bpevent.c (create_breakpoint_event_object): Rename C/Python
variable to breakpoints.
* python/py-stopevent.c (emit_stop_event): Return a Python tuple of
bps instead of single breakpoint. Fix some space typos.
* python/py-stopevent.c (create_breakpoint_event_object): Rename
variable to breakpoints.
testsuite:
* gdb.python/py-events.exp: Set a duplicate breakpoint and check its
presence.
* gdb.python/py-events.py (breakpoint_stop_handler): Browse all the
breakpoint hits.
doc:
* gdb.texinfo (Events In Python): New function documentation:
gdb.BreakpointEvent.breakpoints. Indicate that
gdb.BreakpointEvent.breakpoint is now deprecated.
* python/lib/gdb/__init__.py: Auto-load files in command and
function directories.
* python/python.c (finish_python_initialization): Use
os.path.join.
* python/lib/gdb/command/pretty_printers.py: Self register
command.
* NEWS: Document auto-loading.
2011-08-09 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Python): Document command and function
auto-loading.
* remote.c (remote_region_ok_for_hw_watchpoint): New function.
(remote_hw_watchpoint_length_limit): New variable.
(_initialize_remote) add set,show cmds for this new variable.
* gdb.texinfo: document these new commands.
* NEWS: Mention these new commands.
* gdb.texinfo (whatis, ptype): Highlight their differences. Describe
typedefs unrolling. Extend the sample code by an inner typedef and
outer typedefs unrolling.
* macrotab.h (macro_callback_fn): Add new arguments to callback.
* macrotab.c (foreach_macro): Ditto.
(foreach_macro_in_scope): Ditto.
* macrocmd.c (print_macro_callback): New function.
(info_macro_command): Move some code to print_macro_definition.
(print_macro_definition): New function.
(print_one_macro): Add new arguments to callback.
testsuite/
* gdb.base/info-macros.c: New test sources.
* gdb.base/info-macros.exp: New tests.
docs/
* gdb.texinfo (Macros): Add info definitions and info macros commands.
Update text and cindex entries for info macro command.
* dwarf2read.c (check_physname): New variable.
(dwarf2_physname): Prefer DW_AT_linkage_name over dwarf2_compute_name.
(show_check_physname): New function.
(_initialize_dwarf2_read): Add `check-physname' for check_physname.
gdb/doc/
* gdb.texinfo (Debugging Output): Document set debug
check-physname.
gdb/testsuite/
* gdb.base/break-interp.exp (reach_1, test_ld): Allow also the prefix
__GI_.
* gdb.cp/psymtab-parameter.cc (func): Make it a template function.
(f): New function.
* gdb.cp/psymtab-parameter.exp (complete break 'func(): Rename to ...
(complete p 'func<short>(): ... here.
* gdb.dwarf2/dw2-linkage-name-trust-main.cc: New file.
* gdb.dwarf2/dw2-linkage-name-trust.S: New file.
* gdb.dwarf2/dw2-linkage-name-trust.exp: New file.
* gdb.cp/temargs.exp (test type of F in k3_m, test value of F in k3_m):
Make them KFAIL gcc/49546.
gdb/doc/
* gdb.texinfo (Remote Protocol) <Overview>: Mention vCont is
required for multi-threading support.
(Remote Protocol) <Packets>: Mention that 'c', 's', 'C', 'S' and
Hc are deprecated for multi-threading debugging. Point readers at
the vCont packet.
"No" for missing scripts.
(info_auto_load_scripts): Tweak "Loaded" column to fit "Missing".
doc/
* gdb.texinfo (Auto-loading): Document printing of missing scripts.
* NEWS: Mention $sdir,$pdir.
* gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): Add $sdir:$pdir.
* linux-thread-db.c (try_thread_db_load_from_pdir): New function.
(try_thread_db_load_from_sdir): New function.
(try_thread_db_load_from_dir): New function.
(thread_db_load_search): Handle $pdir, $sdir. Remove trying of
system directories if search of libthread-db-search-path fails,
that is now done via $sdir.
(has_libpthread): New function.
(thread_db_load): Remove search for libthread_db in directory of
libpthread, that is now done via $pdir.
gdbserver/
* thread-db.c (try_thread_db_load_from_sdir): New function.
(try_thread_db_load_from_dir): New function.
(thread_db_load_search): Handle $sdir, ignore $pdir.
Remove trying of system directories if search of
libthread-db-search-path fails, that is now done via $sdir.
doc/
* gdb.texinfo (Threads): Document $sdir,$pdir.
(Server): Document $pdir exception.
* python/py-auto-load.c (struct auto_load_pspace_info): New member
script_not_found_warning_printed.
(init_loaded_scripts_info): Renamed from create_loaded_scripts_hash,
all callers updated. Initialize script_not_found_warning_printed.
(get_auto_load_pspace_data_for_loading): New function.
(maybe_add_script): New function.
(source_section_scripts): Simplify. Only print one warning regardless
of the number of auto-load scripts not found.
(clear_section_scripts): Clear script_not_found_warning_printed.
(auto_load_objfile_script): Record script in hash table.
(count_matching_scripts): New function.
(maybe_print_script): Renamed from maybe_print_section_script, all
callers updated. Rewrite to use ui_out_*.
(info_auto_load_scripts): Renamed from
maintenance_print_section_scripts, all callers updated.
(gdbpy_initialize_auto_load): "maintenance print section-scripts"
renamed as "info auto-load-scripts".
doc/
* gdb.texinfo (Auto-loading): Document "info auto-load-scripts".
testsuite/
* gdb.python/py-objfile-script.exp: New file.
* gdb.python/py-objfile-script.c: New file.
* gdb.python/py-objfile-script-gdb.py: New file.
* testsuite/gdb.python/py-section-script.exp: Test
"info auto-load-scripts".
experiment is still running.
gdb/
* breakpoint.c (disable_breakpoint): Disable all locations
associated with a tracepoint on target if a trace experiment is
running.
(disable_command): Disable a specific tracepoint location on target if
a trace experiment is running.
(do_enable_breakpoint): Enable all locations associated with a
tracepoint on target if a trace experiment is running.
(enable_command) Enable a specific tracepoint location on target if a
trace experiment is running.
* target.c (update_current_target): Add INHERIT and de_fault clauses for
to_supports_enable_disable_tracepoint, to_enable_tracepoint and
to_disable_tracepoint.
* target.h: Add declaration of struct bp_location.
(struct target_ops): Add new functions
to_supports_enable_disable_tracepoint, to_enable_tracepoint and
to_disable_tracepoint to target operations.
(target_supports_enable_disable_tracepoint): New macro.
(target_enable_tracepoint): New macro.
(target_disable_tracepoint): New macro.
* remote.c (struct remote_state): Add new field.
(remote_enable_disable_tracepoint_feature): New.
(remote_protocol_features): Add new entry.
(remote_supports_enable_disable_tracepoint): New.
(remote_enable_tracepoint): New.
(remote_disable_tracepoint): New.
(init_remote_ops): Add remote_enable_tracepoint,
remote_disable_tracepoint and remote_supports_enable_disable_tracepoint
to remote operations.
* tracepoint.c (start_tracing): Allow tracing to start without any
tracepoints enabled with just a warning if they can be re-enabled
later.
* NEWS: Add news item for the new behaviour of the enable and disable
GDB commands when applied to tracepoints.
Add news items for the new remote packets QTEnable and QTDisable.
gdb/doc/
* gdb.texinfo: Document change in the behaviour of the enable and
disable GDB commands when applied to tracepoints.
Document the EnableDisableTracepoints remote stub feature.
Document QTEnable and QTDisable in the list of tracepoint packets.
gdb/gdbserver/
* server.c (handle_query): Add EnableDisableTracepoints to the list
of supported features.
* tracepoint.c (clear_installed_tracepoints): Uninstall disabled
tracepoints.
(cmd_qtenable_disable): New.
(cmd_qtstart): Install tracepoints even if disabled.
(handle_tracepoint_general_set): Add call to cmd_qtenable_disable on
receiving a QTEnable or QTDisable packet.
(gdb_collect): Skip data collection if fast tracepoint is disabled.
(ust_marker_to_static_tracepoint): Do not ignore disabled static
tracepoints.
(gdb_probe): Skip data collection if static tracepoint is disabled.
(_initialize_thread_db): Add setter for libthread-db-search-path.
gdbserver/
* thread-db.c (thread_db_handle_monitor_command): Handle elided path.
doc/
* gdb.texinfo (Threads): If an empty path is provided for
libthread-db-search-path it is reset to its default value.
(Server): Ditto.
Thiago Jung Bauermann <bauerman@br.ibm.com>
Implement support for PowerPC BookE masked watchpoints.
gdb/
* NEWS: Mention masked watchpoint support. Create "Changed commands"
section.
* breakpoint.h (struct breakpoint_ops) <works_in_software_mode>: New
method. Initialize to NULL in all existing breakpoint_ops instances.
(struct breakpoint) <hw_wp_mask>: New field.
* breakpoint.c (is_masked_watchpoint): Add prototype.
(update_watchpoint): Don't set b->val for masked watchpoints. Call
breakpoint's breakpoint_ops.works_in_software_mode if available.
(watchpoints_triggered): Handle the case of a hardware masked
watchpoint trigger.
(watchpoint_check): Likewise.
(works_in_software_mode_watchpoint): New function.
(insert_masked_watchpoint, remove_masked_watchpoint)
(resources_needed_masked_watchpoint)
(works_in_software_mode_masked_watchpoint, print_it_masked_watchpoint)
(print_one_detail_masked_watchpoint, print_mention_masked_watchpoint)
(print_recreate_masked_watchpoint, is_masked_watchpoint): New
functions.
(masked_watchpoint_breakpoint_ops): New structure.
(watch_command_1): Check for the existence of the `mask' parameter.
Set b->ops according to the type of hardware watchpoint being created.
* ppc-linux-nat.c (ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_masked_watch_num_registers): New functions.
(_initialize_ppc_linux_nat): Initialize to_insert_mask_watchpoint,
to_remove_mask_watchpoint and to_masked_watch_num_registers.
* target.c (update_current_target): Mention to_insert_mask_watchpoint,
to_remove_mask_watchpoint, and to_masked_watch_num_registers.
(target_insert_mask_watchpoint, target_remove_mask_watchpoint)
(target_masked_watch_num_registers): New functions.
* target.h (struct target_ops) <to_insert_mask_watchpoint>,
<to_remove_mask_watchpoint>, <to_masked_watch_num_registers>: New
methods.
(target_insert_mask_watchpoint, target_remove_mask_watchpoint)
(target_masked_watch_num_registers): Add prototypes.
gdb/doc/
* gdb.texinfo (Set Watchpoints): Document mask parameter.
(PowerPC Embedded): Mention support of masked watchpoints.
@value{GDBN} should be used in place of GDB, so this patch fixes it.
gdb/doc/ChangeLog:
* gdb.texinfo (In Memoriam): Replace litteral uses of `GDB' with
`@value{GDBN}'.
This change removes the dedication of the manual to Fred Fish.
It also creates a new `In Memoriam' appendix, where Fred Fish
and Michael Snyder are mentioned.
gdb/doc/ChangeLog:
* gdb.texinfo (titlepage): Remove dedication.
(In Memoriam): New appendix.
* gdb.texinfo (Index Section Format): Change the version to 5.
Describe the different formula.
gdb/
Case insensitive lookups implementation.
* dwarf2read.c: Include ctype.h.
(struct mapped_index): New field version.
(mapped_index_string_hash): New parameter index_version. New comment
for it. Call tolower appropriately.
(find_slot_in_mapped_hash): New variable cmp, initialize it, use it.
Choose the right index version for mapped_index_string_hash.
(dwarf2_read_index): Support also the index version 5. Initialize the
new struct mapped_index field version.
(hash_strtab_entry): Pass INT_MAX for the new parameter, explain why.
(find_slot): Explain the version needs. Pass INT_MAX for the new
parameter.
(write_psymtabs_to_index): Produce version 5.
* minsyms.c (lookup_minimal_symbol): New variable cmp, initialize it,
use it. New comment for SYMBOL_MATCHES_SEARCH_NAME.
* psymtab.c (lookup_partial_symbol): Find the
SYMBOL_MATCHES_SEARCH_NAME start of the found block of matching
entries.
* symtab.c (lookup_symbol_in_language): Remove the case_sensitive_off
NAME lowercasing.
(search_symbols): Pass REG_ICASE to regcomp for case_sensitive_off.
(completion_list_add_name): New variable ncmp, initialize it, use it.
* symtab.h (SYMBOL_HASH_NEXT): Always call tolower.
* utils.c (strcmp_iw): Support case_sensitive_off.
(strcmp_iw_ordered): Sort in a way compatible with case_sensitive_off.
New function comment part. New variables saved_string1,
saved_string2 and case_pass. Add a proper second pass.
gdb/testsuite/
* gdb.base/fortran-sym-case.c: New file.
* gdb.base/fortran-sym-case.exp: New file.
* gdb.dwarf2/dw2-case-insensitive-debug.S: New file.
* gdb.dwarf2/dw2-case-insensitive.c: New file.
* gdb.dwarf2/dw2-case-insensitive.exp: New file.
* NEWS: Document the new gdbserver --once option.
gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): New anchor
for disconnected tracing.
(Multi-Process Mode for @code{gdbserver}): Mention --multi and
extended-remote relationship. Mention --once.
(TCP port allocation lifecycle of @code{gdbserver}): New.
gdb/gdbserver/
* remote-utils.c (handle_accept_event): Close LISTEN_DESC only if
RUN_ONCE. Comment for the LISTEN_DESC delete_file_handler call.
(remote_prepare): New function with most of the TCP code from ...
(remote_open): ... here. Detect PORT here unconditionally. Move also
setting transport_is_reliable.
* server.c (run_once): New variable.
(gdbserver_usage): Document it.
(main): Set run_once for `--once'. Call remote_prepare. Exit after
the first run if RUN_ONCE.
* server.h (run_once, remote_prepare): New declarations.
gdb/testsuite/
* gdb.base/solib-disc.exp: Set gdbserver_reconnect_p.
* lib/gdb.exp (gdb_init): Clear gdbserver_reconnect_p.
* lib/gdbserver-support.exp (gdbserver_start): Add `--once' if
!gdbserver_reconnect_p..
(gdbserver_reconnect): Call error if !gdbserver_reconnect_p..
* dwarf2read.c (save_gdb_index_command): Replace format
documentation with a pointer to the manual.
gdb/doc
* gdb.texinfo (Index Section Format): New node.
(Top): Add new node to menu.
This rewrites the code generating the Ada exception catchpoint hit
notification for both the GDB/MI case as well as the non-MI case,
by using the relevant ui_out_* functions to generate the output.
the MI notifications for Ada exception catchpoints now include
the stop reason, and the breakpoint "disp", much like other breakpoint
events do. It also introduces a new field "exception-name" for
exception catchpoints (excluding "failed assertion catchpoints,
where we just want to know that it was a failed assertion).
gdb/ChangeLog:
* breakpoint.h (bpdisp_text): Add declaration.
* breakpoint.c (bpdisp_text): Make non-static.
* ada-lang.c: #include "mi/mi-common.h".
(print_it_exception): Rewrite to improve GDB/MI output.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Ada Exception Information): Document
the "exception-name" field in the *stopped async record.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_catch_ex: New testcase.
Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
Implement support for PowerPC BookE ranged breakpoints.
gdb/
* NEWS: Mention support for ranged breakpoints on embedded PowerPC.
* breakpoint.h (struct bp_target_info) <length>: New member
variable.
(struct breakpoint_ops) <breakpoint_hit>: Take struct bp_location
instead of struct breakpoint as argument, and also add ASPACE
and BP_ADDR arguments. Update all callers.
(struct breakpoint_ops) <print_one_detail>: New method.
(struct breakpoint) <addr_string_range_end>: New member variable.
* breakpoint.c (breakpoint_location_address_match): Add function
prototype.
(insert_bp_location): Set bl->target_info.length.
(breakpoint_here_p): Call breakpoint_location_address_match.
(moribund_breakpoint_here_p): Likewise.
(regular_breakpoint_inserted_here_p): Likewise.
(breakpoint_thread_match): Likewise.
(bpstat_stop_status): Likewise.
(bpstat_check_location): Move call to
breakpoint_ops.breakpoint_hit to the top.
(print_one_breakpoint_location): Call
breakpoint_ops.print_one_detail if available.
(breakpoint_address_match_range): New function.
(breakpoint_location_address_match): Likewise.
(breakpoint_locations_match): Compare the length field of the
locations too.
(hw_breakpoint_used_count): Count resources used by all locations
in a breakpoint, and use breakpoint_ops.resources_needed if
available.
(breakpoint_hit_ranged_breakpoint): New function.
(resources_needed_ranged_breakpoint): Likewise.
(print_it_ranged_breakpoint): Likewise.
(print_one_ranged_breakpoint): Likewise.
(print_one_detail_ranged_breakpoint): Likewise.
(print_mention_ranged_breakpoint): Likewise.
(print_recreate_ranged_breakpoint): Likewise.
(ranged_breakpoint_ops): New structure.
(find_breakpoint_range_end): New function.
(break_range_command): Likewise.
(delete_breakpoint): Free addr_string_range_end.
(update_breakpoint_locations): Add SALS_END argument. Update
all callers. Calculate breakpoint length if a non-zero SALS_END
is given. Call breakpoint_locations_match instead of
breakpoint_address_match.
(reset_breakpoint): Find SaL of the end of the range if B is a
ranged breakpoint.
(_initialize_breakpoint): Register break-range command.
* defs.h (print_core_address): Add function prototype.
* ppc-linux-nat.c (ppc_linux_ranged_break_num_registers): New
function.
(ppc_linux_insert_hw_breakpoint): Support ranged breakpoints.
(ppc_linux_remove_hw_breakpoint): Likewise.
(_initialize_ppc_linux_nat): Initialize
to_ranged_break_num_registers.
* target.c (update_current_target): Add comment about
to_ranged_break_num_registers.
(target_ranged_break_num_registers): New function.
* target.h (struct target_ops) <to_ranged_break_num_registers>:
New method.
(target_ranged_break_num_registers): Add function prototype.
* ui-out.c (ui_out_field_core_addr): Move address-printing logic to ...
* utils.c (print_core_address): ... here.
gdb/doc/
* gdb.texinfo (PowerPC Embedded): Document ranged breakpoints.
* gdb.texinfo (Breakpoints In Python): Add description and
example
of Python stop function operation.
2010-03-14 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp: Add Python stop operations
tests.
2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
* python/python.h: Declare gdbpy_should_stop and
gdbpy_breakpoint_has_py_cond.
* python/python.c: Add python.h to includes. Remove
python.h from
HAVE_PYTHON definition
(gdbpy_should_stop): New dummy function.
(gdbpy_breakpoint_has_py_cond): New dummy function.
* python/py-breakpoint.c (bppy_init): Rewrite to allow
sub-classing capabilities.
(gdbpy_should_stop): New function.
(gdbpy_breakpoint_has_py_cond): New function.
(local_setattro): New function.
* breakpoint.c (condition_command): Add check for Python
'stop'
operation.
(bpstat_check_breakpoint_conditions): Execute Python
'stop'
operation function as part of stop/continue tests.
I noticed this error because the nightly snapshot script failed...
gdb/doc/ChangeLog:
* gdb.texinfo (Inferiors and Programs): Fix small error introduced
in the previous change.
* value.c (value_from_history_ref): New function.
* value.h (value_from_history_ref): Export.
* cli/cli-utils.c (get_number_trailer): Use value_from_history_ref
to parse value history references.
* cli/cli-utils.h (get_number_trailer): Update comment.
2011-02-24 Michael Snyder <msnyder@vmware.com>
* gdb.base/break.exp: Add tests for delete breakpoints using
convenience variables and value history references.
* inferior.c (detach_inferior_command): Use get_number_or_range.
(kill_inferior_command): Ditto.
(remove_inferior_command): Ditto.
(initialize_inferiors): Make command names plural.
Update help strings.
2011-02-25 Michael Snyder <msnyder@vmware.com>
* gdb.texinfo (Inferiors and Programs): Update commands to show
that they can accept multiple arguments.
2011-02-25 Michael Snyder <msnyder@vmware.com>
* gdb.multi/base.exp: Add test for remove-inferiors.
* breakpoint.c (breakpoint_1): Change first argument from an int
to a char pointer, so that the function now accepts a list of
breakpoints rather than just one. Use new function
'number_is_in_list' to implement.
(breakpoints_info): Pass char * instead of int to breakpoint_1.
(watchpoints_info): Ditto.
(tracepoints_info): Ditto.
(maintenance_info_breakpoints): Ditto.
(_initialize_breakpoint): Update help strings to reflect the fact
that these functions can now take more than one argument.
* cli/cli-utils.c (number_is_in_list): New function.
* cli/cli-utils.h (number_is_in_list): Export.
2011-02-21 Michael Snyder <msnyder@vmware.com>
* gdb.texinfo (Set Breaks): Add @dots{} to arguments of info break.
(Set Watchpoints): Add @dots{} to argument of info watchpoints.
(Listing Tracepoints): Add @dots{} to argument of info tracepoints.
2011-02-21 Michael Snyder <msnyder@vmware.com>
* gdb.base/break.exp: Add tests for "info break" with arguments.
* gdb.trace/infotrace.exp: Update patterns for error and help.
* gdb.base/completion.exp: Update pattern.
* gdb.base/ena-dis-br.exp: Update pattern.
* gdb.base/help.exp: Update patterns.
* command.h (enum command_class): New class 'no_set_class', for
"show" commands without a corresponding "set" command.
* value.c (_initialize_values): Use 'no_set_class' for "show values".
* copying.c (_initialize_copying): Ditto for "show copying" and
"show warranty".
* cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
"show version".
* cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
which there is no corresponding "set" command (eg. "show copying").
2011-02-14 Michael Snyder <msnyder@vmware.com>
* gdb.texinfo (threads): Document argument for "info threads" cmd.
Document new command "thread find".
2011-02-15 Michael Snyder <msnyder@vmware.com>
* gdb.base/default.exp: Add tests for thread commands.
* gdb.base/help.exp: Add tests for thread commands.
* gdb.threads/thread-find.exp: New test for thread find command.
2011-02-04 Sami Wagiaalla <swagiaal@redhat.com>
* gdb.python/py-evthreads.c: New file.
* gdb.python/py-evthreads.exp: New file.
* gdb.python/py-events.py: New file.
* gdb.python/py-events.exp: New file.
* gdb.python/py-events.c: New file.
2011-02-04 Sami Wagiaalla <swagiaal@redhat.com>
Oguz Kayral <oguzkayral@gmail.com>
* python/py-inferior.c (python_on_normal_stop): New function.
(python_on_resume): New function.
(python_inferior_exit): New function.
(gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
inferior_exit observers.
* python/py-evtregistry.c: New file.
* python/py-threadevent.c : New file.
* python/py-event.c: New file.
* python/py-evts.c: New file.
* python/py-continueevent.c: New file.
* python/py-bpevent.c: New file.
* python/py-signalevent.c: New file.
* python/py-exetiedevent.c: New file.
* python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
Move struct breakpoint_object from here...
* python/python-internal.h: ... to here.
* python/py-event.h: New file.
* python/py-events.h: New file.
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
(SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
Add build rules for all the above.
The real purpose of this setting is really to override what the debugger
would otherwise guess from checking the stdin settings. So it seems
more natural to see this setting being handled inside gdb_has_a_terminal
rather than input_is_terminal (which checks for other things, such as
whether the input is stdin, for instance).
This patch also adjust the command help and the associated section in
the GDB Manual to be a little clearer about that.
gdb/ChangeLog:
* inflow.c: Include "gdbcmd.h".
(interactive_mode): New static global, moved here from top.c.
(show_interactive_mode): New function, moved here from top.c.
use gdb_has_a_terminal instead of input_from_terminal_p to
determine the current mode.
(gdb_has_a_terminal): Add handling of the "iteractive-mode"
setting.
(_initialize_inflow): Add the "set/show interactive-mode"
commands. Moved here from top.c, after having adjusted slightly
the help text.
* top.c (interactive_mode, show_interactive_mode): Delete, moved
to inflow.c.
(input_from_terminal_p): Remove handling of "interactive-mode"
setting, moved to infow.c.
(init_main): Remove creation of the "set/show interactive-mode"
commands, moved to inflow.c.
gdb/doc/ChangeLog:
* gdb.texinfo (Other Misc Settings): Rework part of the
documentation of the "set interactive mode" command.
gdb/
* disasm.c (dump_insns): Support dumping opcodes for MI.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
dumping of instruction opcodes.
gdb/doc/
* gdb.texinfo (GDB/MI Data Manipulation): Update to reflect
changes in mi/mi-cmd-disas.c
gdb/testsuite/
* gdb.mi/mi-disassemble.exp, gdb.mi/mi2-disassemble.exp: Update
expected output to reflect changes in gdb/mi/mi-cmd-disas.c and
add new tests for opcode dumping.
Thiago Jung Bauermann <bauerman@br.ibm.com>
Implement support for PowerPC BookE ranged watchpoints.
gdb/
* breakpoint.h
(struct breakpoint_ops) <resources_needed>: New method.
Initialize to NULL in all existing breakpoint_ops instances.
(struct breakpoint) <exact>: New field.
(target_exact_watchpoints): Declare external global.
* breakpoint.c (target_exact_watchpoints): New global flag.
(update_watchpoint): Set b->type to bp_hardware_watchpoint and
b->enable_state to bp_enabled before calling
hw_watchpoint_used_count.
(hw_watchpoint_used_count): Iterate over all bp_locations in a
watchpoint. Call breakpoint's breakpoint_ops.resources_needed
if available.
(insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
if the watchpoint is exact.
(resources_needed_watchpoint): New function.
(watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
(watch_command_1): Set b->exact if the user asked for an exact
watchpoint and one can be set.
(can_use_hardware_watchpoint): Add exact_watchpoints argument.
Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
the user asks for an exact watchpoint and one can be set. Return
number of needed debug registers to watch the expression.
* gdbtypes.c (is_scalar_type): New function, based on
valprint.c:scalar_type_p.
(is_scalar_type_recursive): New function.
* gdbtypes.h (is_scalar_type_recursive): Declare.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
handle regions when ranged watchpoints are available.
(create_watchpoint_request): New function.
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
create_watchpoint_request.
* rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
(_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
`set powerpc' and `show powerpc' commands.
* target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
Mention documentation comment in the target macro.
(target_region_ok_for_hw_watchpoint): Document return value.
gdb/doc/
* gdb.texinfo (PowerPC Embedded): Document ranged watchpoints and
the "set powerpc exact-watchpoints" flag.
This patch enhances the debugger to distinguish between fat pointers
that represent either: array types, or array access types. In the latter
case, the object/type is encoded as a typedef type pointing to the fat
pointer.
The first part of the change is to adjust ada_check_typedef to avoid
stripping the typedef layer when it points to a fat pointer. The rest
of the patch is adjustments required in various places to deal with
the fact that the type is uses might now be a typedef.
gdb/ChangeLog:
* ada-lang.h (ada_coerce_to_simple_array): Add declaration.
* ada-lang.c (ada_typedef_target_type): New function.
(desc_base_type): Add handling of fat pointer typedefs.
(ada_coerce_to_simple_array): Make non-static.
(decode_packed_array_bitsize): Add handling of fat pointer typedefs.
Add assertion.
(ada_template_to_fixed_record_type_1, ada_to_fixed_type)
(ada_check_typedef): Add handling of fat pointer typedefs.
(ada_evaluate_subexp) [OP_FUNCALL]: Likewise.
* ada-typeprint.c (ada_print_type): Add handling of fat pointer
typedefs.
* ada-valprint.c (ada_val_print_1): Convert fat pointers that are not
array accesses to simple arrays rather than simple array pointers.
(ada_value_print): In the case of array descriptors, do not print
the value type description unless it is an array access.
gdb/testsuite/ChangeLog:
* gdb.ada/lang_switch.exp: Correct expected parameter value.
gdb/doc/ChangeLog:
* gdb.texinfo (Ada Glitches): Remove paragraph describing the
occasional case where the debugger prints an array address
instead of the array itself.
* python/py-breakpoint.c (BPPY_REQUIRE_VALID): Check if bp is
NULL.
(BPPY_SET_REQUIRE_VALID): Ditto.
(bpnum_is_valid): Delete function.
(bppy_get_visibility): New function.
(bppy_new): Parse for, and validate internal keyword. Pass
internal keyword to breakpoint or watchpoint functions.
(build_bp_list): New function.
(gdbpy_breakpoints): Rewrite. Use build_bp_list and
iterate_over_breakpoints.
(gdbpy_breakpoint_created): Rewrite. Do not store breakpoints in a
look-aside vector.
(gdbpy_breakpoint_deleted): Rewrite, defer breakpoint management
to internal breakpoint chain.
* breakpoint.c (set_breakpoint_number): New function.
(breakpoint_1): Check if breakpoint number is more than zero.
(set_raw_breakpoint_without_location): Set py_bp_object to NULL.
(create_breakpoint_sal): Take a new parameter called internal.
Call set_breakpoint_number with internal parameter. Do not
mention internal breakpoints. All callers updated.
(create_breakpoint): Ditto.
(create_breakpoints_sal): Ditto.
(watch_command_1): Ditto.
(watch_command_wrapper): Take a new parameter called internal.
All callers updated.
(rwatch_command_wrapper): Ditto.
(awatch_command_wrapper): Ditto.
(save_breakpoints): Update breakpoint save condition check.
(iterate_over_breakpoints): New function.
* breakpoint.h: Add conditional python includes. Add py_bp_object
and comment to struct breakpoint. Update all callers.
* defs.h: Add PyObject definition for GDB builds without Python.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Breakpoints In Python): Document "internal"
parameter, and visible attribute.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp: Add internal watchpoint and
breakpoint tests.
New command "set directories".
* NEWS: Document them.
* source.c (set_directories_command): New function.
(show_directories_1): Renamed from show_directories.
All callers updated.
(show_directories_command): New function.
(_initialize_source): Install "directories" as a set/show
variable instead of just a show command.
doc/
* gdb.texinfo (Source Path): Document "set directories".
testsuite/
* gdb.base/help.exp: Update expected output.
* gdb.python/py-parameter.exp: New file.
enable pretty-printer, disable pretty-printer.
* NEWS: Mention them.
* data-directory/Makefile.in (PYTHON_FILES): Add gdb/printing.py,
gdb/command/__init__.py, gdb/command/pretty_printers.py.
* python/lib/gdb/__init__.py: Install pretty-printer commands.
* python/lib/gdb/printing.py: New file.
* python/lib/gdb/command/__init__.py: New file.
* python/lib/gdb/command/pretty_printers.py: New file.
doc/
* gdb.texinfo (Pretty Printing): Expand into three sections,
introduction, example, and commands.
(Python API): Delete section Disabling Pretty-Printers, merge into
Selecting Pretty-Printers.
(Writing a Pretty-Printer): New section. Move the pretty-printer
example here, and reformat to match python coding style. Add a second
example using the gdb.printing module.
(Python modules): Add gdb.printing.
testsuite/
* gdb.python/py-pp-maint.c: New file.
* gdb.python/py-pp-maint.exp: New file.
* gdb.python/py-pp-maint.py: New file.
All references updated. Correct sections marked as subsections.
(Coding Standards): New chapter. Move the coding standard related
subsections here. Add section on Python coding standards.
This announces the support for debugging Ada programs using
the Ravenscar Profile, as well as documents the new commands
introduced as part of this effort.
gdb/ChangeLog:
* NEWS: Announce Ravenscar Profile support.
gdb/doc/ChangeLog:
* gdb.texinfo (Ravenscar Profile): New node.
as a feature reported by -list-target-features.
* gdb.texinfo (GDB/MI Miscellaneous Commands): Document new
feature `reverse' output by -list-target-features.
(arm_psr_thumb_bit): New. Update all uses of CPSR_T to
call this function.
(arm_pc_is_thumb): Add a gdbarch argument. Update all callers.
Check is_m after force-mode.
(arm_gdbarch_init): Check the binary before the target description.
Add check for M profile attribute. If we have an M-profile device,
but no target register description, use arm-with-m. Recognize the
new org.gnu.gdb.arm.m-profile feature and its xpsr register.
(_initialize_arm_tdep): Call initialize_tdesc_arm_with_m.
* arm-tdep.h (XPSR_T): Define.
(struct gdbarch_tdep): Add is_m member.
* features/arm-m-profile.xml, features/arm-with-m.c,
features/arm-with-m.xml: New files.
doc/
* gdb.texinfo (ARM Features): Document
org.gnu.gdb.arm.m-profile.
* linux-thread-db.c (libthread_db_debug): New variable.
(thread_db_find_new_threads_silently): Control verbosity with it.
(try_thread_db_load_1, try_thread_db_load): Likewise.
(find_new_threads_once): Likewise.
(_initialize_thread_db): Set/show it.
doc/ChangeLog
2010-07-31 Paul Pluzhnikov <ppluzhnikov@google.com>
* gdb.texinfo (Threads): Document 'debug libthread-db'.
* python/py-value.c (valpy_call): New Function.
2010-07-27 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-value.exp (test_inferior_function_call): New function.
* gdb.python/py-value.c (func1): New function.
(func2): Likewise.
2010-07-27 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Values From Inferior): Add value inferior function
call description.
Make core files the process_stratum.
* corefile.c (core_target): New variable.
(core_file_command): Remove variable t, use core_target.
* corelow.c (core_ops): Make it static.
(init_core_ops): Change to process_stratum. Initialize CORE_TARGET.
* defs.h (make_cleanup_unpush_target): New prototype.
* gdbarch.h: Regenerate.
* gdbarch.sh (core_pid_to_str): Remove core_stratum from its comment.
* gdbcore.h (core_target): New declaration.
* inf-ptrace.c (inf_ptrace_create_inferior, inf_ptrace_attach): New
variables ops_already_pushed and back_to. Use push_target,
make_cleanup_unpush_target and discard_cleanups calls.
* record.c (record_open): Replace core_stratum by a core_bfd check.
* target.c (target_is_pushed): New function.
(find_core_target): Remove.
* target.h (enum strata) <core_stratum>: Remove.
(target_is_pushed): New declaration.
(find_core_target): Remove declaration.
* tracepoint.c (init_tfile_ops) <to_stratum>: Remove comment.
* utils.c (do_unpush_target, make_cleanup_unpush_target): New functions.
gdb/doc/
Make core files the process_stratum.
* gdb.texinfo (Active Targets): Remove core_stratum. Include
record_stratum example.
gdb/testsuite/
Make core files the process_stratum.
* gdb.base/corefile.exp (run: load core again)
(run: sanity check we see the core file, run: with core)
(run: core file is cleared, attach: load core again)
(attach: sanity check we see the core file, attach: with core)
(attach: core file is cleared): New tests.
* gdb.base/coremaker.c (main): New parameters. Implement "sleep" argv.
2010-06-27 Joel Brobecker <brobecker@adacore.com>
* NEWS: Add entry announcing the python directory.
2010-06-27 Joel Brobecker <brobecker@adacore.com>
* gdb.texinfo (Python): Document what the python directory is
and what its location is.
(Basic Python): Document the gdb.PYTHONDIR constant.
* i386-tdep.c (i386_record_lea_modrm): Change warning to query.
(i386_process_record): Ditto.
* record.c (record_memory_query): New variable.
(_initialize_record): New command "set record memory-query".
* record.h (record_memory_query): New extern.
2010-06-22 Hui Zhu <teawater@gmail.com>
* gdb.texinfo: (Process Record and Replay): Add documentation
for command "set record memory-query".
* gdb.texinfo: Relicense under GFDL version 1.3.
* annotate.texinfo: Relicense under GFDL version 1.3.
* gdbint.texinfo: Relicense under GFDL version 1.3.
* stabs.texinfo: Relicense under GFDL version 1.3.
* fdl.texi: Update to version 1.3.
* osdata.c (get_osdata): Warn separately if target does not report
type list.
(info_osdata_command): Allow empty type, report error if target
does not return available types of OS data.
* linux-nat.c (linux_nat_xfer_osdata): Report list of OS data
types if no annex supplied.
* gdb.texinfo (Operating System Auxiliary Information): Describe
"info os" when no arguments given.
2010-06-16 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* breakpoint.c: Include parser-defs.h.
(watchpoint_exp_is_const): New function.
(watch_command_1): Call watchpoint_exp_is_const to check
if the expression is constant.
gdb/doc/ChangeLog:
2010-06-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo: Include information about the correct use
of addresses in the `watch' command.
gdb/testsuite/ChangeLog:
2010-06-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/watch-notconst.c: New file.
* gdb.base/watch-notconst.S: New file.
* gdb.base/watch-notconst2.c: New file.
* gdb.base/watch-notconst2.S: New file.
* gdb.base/watch-notconst.exp: New file.
* gdb.base/watchpoint.c (global_ptr_ptr): New variable.
(func4): Add operations on `global_ptr_ptr'.
* gdb.base/watchpoint.exp (test_constant_watchpoint): New
routine to test watchpoints created with a constant expression.
(test_inaccessible_watchpoint): Include tests for watchpoints
created with a constant expression.
Add per-operation permission flags.
* target.h (struct target_ops): New method to_set_permissions.
(target_set_permissions): New macro.
(target_insert_breakpoint): Change macro to function.
(target_remove_breakpoint): Ditto.
(target_stop): Ditto.
(may_write_registers): Declare.
(may_write_memory): Declare.
(may_insert_breakpoints): Declare.
(may_insert_tracepoints): Declare.
(may_insert_fast_tracepoints): Declare.
(may_stop): Declare.
* target.c (may_write_registers, may_write_registers_1): New globals.
(may_write_memory, may_write_memory_1): New globals.
(may_insert_breakpoints, may_insert_breakpoints_1): New globals.
(may_insert_tracepoints, may_insert_tracepoints_1): New globals.
(may_insert_fast_tracepoints, may_insert_fast_tracepoints_1): New
globals.
(may_stop, may_stop_1): New global.
(target_xfer_partial): Test for write permission.
(target_store_registers): Ditto.
(target_insert_breakpoint): New function.
(target_remove_breakpoint): New function.
(target_stop): New function.
(_initialize_targets): Add new set/show variables.
(set_write_memory_permission): New function.
(update_target_permissions): New function.
(set_target_permissions): New function.
(update_current_target): Default to_set_permissions.
(_initialize_targets): Use new globals and setter function.
* tracepoint.c (start_tracing): Test for permission.
* inferior.h (update_observer_mode): Declare.
* infrun.c (non_stop_1): Define earlier.
(observer_mode, observer_mode_1): New globals.
(set_observer_mode, show_observer_mode): New functions.
(update_observer_mode): New function.
(_initialize_infrun): Define "set observer" command.
* remote.c (PACKET_QAllow): New optional packet.
(remote_protocol_features): Add QAllow.
(remote_set_permissions): New function.
(remote_start_remote): Call it.
(init_remote_ops): Add it to target vector.
(_initialize_remote): Add config command for QAllow.
* gdb.texinfo (Observer Mode): New section.
(General Query Packets): Document QAllow.
* gdb.base/permissions.exp: New file.
* NEWS: Document them.
* python/py-cmd.c (cmdpy_function): Don't print a traceback if
the exception is gdb.GdbError. Print a second traceback if there's
an error computing the error message.
(gdbpy_string_to_argv): New function.
* python/py-utils.c (gdbpy_obj_to_string): New function.
(gdbpy_exception_to_string): New function.
* python/python-internal.h (gdbpy_string_to_argv): Declare.
(gdbpy_obj_to_string, gdbpy_exception_to_string): Declare.
(gdbpy_gdberror_exc): Declare.
* python/python.c (gdbpy_gdberror_exc): New global.
(_initialize_python): Initialize gdbpy_gdberror_exc and create
gdb.GdbError.
(GdbMethods): Add string_to_argv.
doc/
* gdb.texinfo (Exception Handling): Document gdb.GdbError.
(Commands In Python): Document gdb.string_to_argv.
testsuite/
* gdb.python/py-cmd.exp: Add tests for gdb.GdbError and
gdb.string_to_argv.
Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-parameter.
(SUBDIR_PYTHON_SRCS): Likewise.
(py-parameter.o): New rule.
* python/py-parameter.c: New file.
* python/python-internal.h (gdbpy_initialize_parameter)
(gdbpy_parameter, gdbpy_parameter_value)
(gdbpy_parse_command_name): Declare.
* python/py-cmd.c (parse_command_name): Rename to
gdbpy_parse_command_name.
(gdbpy_parse_command_name): Accept a starting list parameter and
use over cmdlist.
(cmdpy_init): Use gdbpy_parse_command_name.
* python/python.c (parameter_to_python): Rename to
gdbpy_parameter_to_python. Accept enum var_types and value.
(gdbpy_parameter): Use gdbpy_parameter_value.
(_initialize_python): Call gdbpy_initialize_parameters.
2010-04-29 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-param.exp: New File.
2010-04-29 Phil Muldoon <pmuldoon@redhat.com>
Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.texinfo (Parameters In Python): New Node.
* config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS): Remove
macro definition and related comment.
* infrun.c (CANNOT_STEP_HW_WATCHPOINTS): Remove macro.
(resume): Remove code and comment related to this macro.
doc ChangeLog entry:
* gdbint.texinfo (CANNOT_STEP_HW_WATCHPOINTS): Remove explanation
of macro deleted from GDB code.
* gdb.texinfo (Data): New @menu reference to Pretty Printing.
(Python API): Change the reference to Pretty Printing API.
(Pretty Printing): Move the user part under the Data node. Reformat
the sample output to 72 columns. Create a new reference to Pretty
Printing API. Rename the API part ...
(Pretty Printing API): To a new node name.
(Selecting Pretty-Printers, Progspaces In Python, Objfiles In Python)
(GDB/MI Variable Objects): Change references to Pretty Printing API.
* gdbtypes.h (builtin_type): Add builtin_char16 and builtin_char32
fields.
* gdbtypes.c (gdbtypes_post_init): Set builtin_char16 and
builtin_char32 fields.
* printcmd.c (decode_format): Set char size to '\0'
for strings unless explicit size is given.
(print_formatted): Correct calculation of NEXT_ADDRESS
for 16 or 32 bit strings.
(do_examine): Do not force byte size for strings.
Use builtin_char16 and builtin_char32 types to display
16 or 32 bit-wide strings.
(x_command): Set LAST_SIZE to 'b' for string type.
gdb/doc ChangeLog
* gdb.texinfo (Examining memory): Update for
change in string display with explicit size.
gdb/testsuite ChangeLog
* gdb.base/charset.c (Strin16, String32): New variables.
* gdb.base/charset.exp (gdb_test): Test correct display
of 16 or 32 bit strings.
