* (unwind_command): Clean it up and make it print things out
nicer.
* monitor.c: Add ^C handling capability (mostly ripped off from
remote.c).
* (monitor_printf): Make it check the command echo.
* (monitor_printf_noecho): Similar to above, but doesn't check
for echo.
* (monitor_stop): No longer waits for prompt. That is the job of
the caller. This makes things work much better for monitor_wait,
which waits for the prompt itself.
* (monitor_open): Deal with new monitor_stop semantics. Also,
flush input after sending init strings to get rid of junk that may
be output. Also, don't always send \r to remote. Use
monitor_ops->line_term cuz proper character isn't always \r.
* (monitor_fetch_register): Switch to completely different
algorithm to deal with lame-ass monitors which put spaces in the
middle of numbers, and prompt with a space!!!!!
* (monitor_read_memory_single): New routine to be used with
monitors that can only return one byte/short/long at a time. This
is selected via MO_GETMEM_READ_SINGLE.
* (monitor_load_srec): Use monitor_printf_noecho for sending S
records. Most targets don't echo them.
* (monitor.h): Get rid of cmd_delim. Add line_delim.
* op50n-rom.c (op50n_cmds): Fill it up. Make it work.
* w89k-rom.c: Change all eols from \r to \n. Change load_resp to
^Q to prevent error message.
* config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special
instruction sequence at end to make restore_pc_queue happy.
for text symbol only.
* breakpoint.c (create_longjmp_breakpoint): call
lookup_minimal_symbol_text instead of lookup_minimal_symbol.
* symtab.h: add lookup_minimal_symbol_text prototype.
constants into PA instructions.
* Put #ifdefs around all signal handling code. Not generally
needed for embedded boards.
* (hppa_fix_call_dummy): Parameterize offsets into call dummy to
allow different dummys to be used by this code. Use
INSTRUCTION_SIZE instead of REGISTER_SIZE for things.
Conditionalize setup of _sr4export fixup. Improve comments.
* config/pa/tm-hppa.h: Define INSTRUCTION_SIZE. Use a different
call dummy if PA_LEVEL_0 is defined. Better comments for call
dummys. Define offsets for LDIL/LDO instructions which load
function addresses.
* config/pa/tm-pro.h: Get rid of signal handling stuff. Define
PA_LEVEL_0 to disable mucking with space regs and such.
* alpha-tdep.c (alpha_push_arguments): Fix typo (TYPE_VALUE ->
VALUE_TYPE). Do the cast for TYPE_CODE_BOOL, TYPE_CODE_CHAR,
TYPE_CODE_ENUM, and TYPE_CODE_RANGE as well as TYPE_CODE_INT.
Sat Apr 15 14:04:32 1995 Per Bothner <bothner@cygnus.com>
* alpha-tdep.c (alpha_push_arguments): Only cast to long for
TYPE_CODE_INT.
consistency with error_begin. Also print warning_pre_print.
Document it better.
* utils.c (warning): Use it.
* utils.c (error_begin): Doc fix.
* rs6000-nat.c (vmap_ldinfo): If symfile_objfile is not part of
any vmap, nuke it.
nodebug_var_symbol_type as type of variables which don't have any
ecoff debug info associated with them.
(parse_symbol, parse_procedure): Use heuristics to determine if
functions were compiled without debugging info and change their
type to nodebug_function_symbol_type.
(_initialize_mdebugread): Initialize nodebug_*_symbol_type.
* source.c (line_info): Clear sal.pc for `info line' without
arguments.
send_xmodem_packet shows up to do the obvious. Lots of fixes to
xmodem downloads including resetting of block number at start of
new transfers, fix for buffer overrun problem, addition of CRC
generation code.
* (monitor_open): loadtype_str and loadproto_str now default to
first entry in monitor_ops->loadtypes.
* (monitor_wait): Lengthen register dump buf, because of verbose
Winbond monitor.
* (monitor_fetch_register): Report unimplemented registers as 0.
* (monitor_read_memory): Only do 16 byte aligned transfers
because of formatting weirdness with the Winbond monitor. Also,
ignore non-hex, non-whitespace formatting between bytes (same
monitor).
* (monitor_load): Clean up logic.
* (monitor_load_srec): Re-do xmodem support. Move lots of it
into send_xmodem_packet.
* (getacknak): Get rid of polls and timeouts. Handle CRC
requests from receiver.
* (monitor_make_srec): Efficiency improvements. Don't call
sprintf to output two digit hex numbers.
* (crcinit, docrc): New, CRC-16 support routines.
* (send_xmodem_packet): New routine to generate either CRC-16 or
checksummed xmodem packets.
* remote-est.c (est_loadtypes), rom68k-rom.c (rom68k_loadtypes):
Reduce tables down to only the load types supported by each
monitor.
* w89k-rom.c (w89k_supply_register): Parses output of Winbond
register dumps.
* (w89k_loadtypes, w89k_loadprotos): Reduce to just srec/xmodem.
* (w89k_cmds): Add clear all breakpoints, memory fill, and dump
registers commands.
* Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate
locations (per-host) for X11 include files.
* config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force
the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs
of the R5 include files.
end-sanitize-gdbtk
* monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of
support for interrupting target.
* monitor.c (monitor_open): Send stop command before doing
anything else.
* (monitor_load_srec): Fix record size calculation to prevent end
of segment from getting trashed.
* rom68k-rom.c: Update to latest version of struct monitor_ops.
* config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order
problems. Makes DOS hosted function calling work.
* sparclite/crt0.s: Define _start to make COFF happy.
* testsuite/config/rom68k.exp (gdb_target_rom68k): Use
$targetname, $serialport and $baud instead of hardwired variables.
* testsuite/gdb.base/{sigall.exp signals.exp}: Skip these if the
target doesn't support signals.
set, set TYPE_FLAG_TARGET_STUB.
(check_stub_type): Recalculate TYPE_LENGTH for range type.
* stabsread.c (read_range_type): If index type number is followed
by '=', back up, call read_type. and assume we have a true range.
* gdbtypes.h (TYPE_FLAG_TARGET_STUB): Update comment.
This fixes PR 6632.
sparc-tdep.c (supply_gregset, supply_fpregset): Fill inaccessible
registers with zero to handle recent read_register_bytes change.
* irix4-nat.c, irix5-nat.c, mipsv4-nat.c (supply_gregset,
fill_gregset): Fix handling of CAUSE_REGNUM.
* mips-nat.c (store_inferior_registers): Handle unwritable
registers when storing a single register.
* config/mips/tm-irix3.h (CAUSE_REGNUM, BADVADDR_REGNUM):
Fix definitions.
* mdebugread.c (parse_symbol, psymtab_to_symtab_1): Clear
allocated mips_extra_func_info, if the debug info is corrupt,
the PDR to fill it in might be missing.
with the real source file name.
* dbxread.c (end_psymtab): Handle static functions in the
SOFUN_ADDRESS_MAYBE_MISSING case by passing pst->filename
to lookup_minimal_symbol.
(process_one_symbol): Ignore extra outermost context from
SunPRO cc and acc.
* stabsread.c (define_symbol): Do not complain for SunPRO
static variable encoding if STATIC_TRANSFORM_NAME is defined.
* sparc-tdep.c, config/sparc/tm-sun4sol2.h
(sunpro_static_transform_name): Renamed from
solaris_static_transform_name.
* config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
Define to sunpro_static_transform_name for acc 3.0 compiled
executables.
* procfs.c, config/alpha/nm-osf2.h (PROCFS_DONT_TRACE_FAULTS):
Renamed from PROCFS_DONT_TRACE_IFAULT, don't trace any faults
if defined.
* procfs.c (info_proc_siginfo): Cast sip->si_addr to
`unsigned long' and use `lx' format for printing it.
CANNOT_STORE_REGISTER to a better place. Fixes ptrace I/O errors
found by test suite during function calls, which attempts to write
unwritable registers.
these routines much smarter about updating registers from the
target, only doing so when absolutely necessary. This really
speeds up register modification on some remote targets.
* monitor.c: More cleanups. Get rid of monitor_load_ascii_srec.
BFD makes this unnecessary. Lots of debugging speedups.
* (expect): NULL terminate return string.
* (monitor_open monitor_supply_register parse_register_dump
monitor_wait monitor_fetch_register): Switch to using GNU regexp
library to parse multi-register displays.
* (monitor_read_memory): Read multiple bytes (up to 16) at once.
* (monitor_create_inferior): Call clear_proceed_status to make run
command notice first breakpoint.
* (monitor_load): Clean up. Reset inferior_pid, set pc to start
address and reset symbol table stuff to make loads put things into
a fresh state.
* (monitor_load_srec): Lower sleep time to 1 second.
* monitor.h (struct monitor_ops): Add register_pattern and
supply_register to monitor_ops.
* rom68k-rom.c: Add new support for handling register dumps.
argument be an int, not a char. Using a prototype followed by an
old-style function definition in a case where an argument is
widened is a GCC-ism not supported by the native AIX compiler.
that contains a static instance of the class.
* cp-valprint.c (dont_print_vb_obstack): Renamed from
dont_print_obstack, made static.
(dont_print_statmem_obstack): New obstack, controls printing
of static member classes.
(_initialize_cp_valprint): Initialize it.
(cp_print_static_field): New function, handles printing of
static members.
(cp_print_value_fields): New parameter dont_print_statmem to
handle recursive printing of static member classes, use
cp_print_static_field to handle printing of static members.
* c-valprint.c (cp_print_value_fields): Update prototype and
call to include additional dont_print_statmem parameter.
* c-valprint.c, f-valprint.c (dont_print_obstack): Remove unused
extern declaration.
* alpha-tdep.c, findvar.c, infptrace.c: Include <string.h>.
* config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS): Call
alpha_find_saved_regs if fi->saved_regs is still NULL.
* elfread.c (elf_symtab_read): Ensure that the filename field
of a minsym is nonempty. Ignore solib trampoline symbols from
the main symbol table, they might have a bogus value.
* procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh:
Fix typos in comments.
pdr.framereg field of MIPS_EFI_SYMBOL_NAME symbol to -1. That way
we know whether the PDR ever got set.
* mips-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
use the PDR, just examine prologues instead.
convenience variable $_ to be the line # of the match.
* symtab.c (decode_line_1): Allow convenience variables to be
used in line specs (for breakpoints and such).
Sun make (with VPATH) work...
* monitor.c monitor.h rom68k-rom.c: Serious cleanup to make IDP
(rom68k) target work right.
* array-rom.c op50-rom.c w89k-rom.c: Partial updates to new
monitor.c interface. More work needs to be done here.
* config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to
match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no
floating-point for this card.
