The attached patch fixes the SEGV and lets GDB successfully
load all kernel modules installed by default on RHEL 7.
Valgrind on F-21 x86_64 host has shown me more clear what is the problem:
Reading symbols from /home/jkratoch/t/cordic.ko...Reading symbols from
/home/jkratoch/t/cordic.ko.debug...=================================================================
==22763==ERROR: AddressSanitizer: heap-use-after-free on address 0x6120000461c8 at pc 0x150cdbd bp 0x7fffffffc7e0 sp 0x7fffffffc7d0
READ of size 8 at 0x6120000461c8 thread T0
#0 0x150cdbc in ppc64_elf_get_synthetic_symtab /home/jkratoch/redhat/gdb-test-asan/bfd/elf64-ppc.c:3282
#1 0x8c5274 in elf_read_minimal_symbols /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1205
#2 0x8c55e7 in elf_symfile_read /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1268
[...]
0x6120000461c8 is located 264 bytes inside of 288-byte region [0x6120000460c0,0x6120000461e0)
freed by thread T0 here:
#0 0x7ffff715454f in __interceptor_free (/lib64/libasan.so.1+0x5754f)
#1 0xde9cde in xfree common/common-utils.c:98
#2 0x9a04f7 in do_my_cleanups common/cleanups.c:155
#3 0x9a05d3 in do_cleanups common/cleanups.c:177
#4 0x8c538a in elf_read_minimal_symbols /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1229
#5 0x8c55e7 in elf_symfile_read /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1268
[...]
previously allocated by thread T0 here:
#0 0x7ffff71547c7 in malloc (/lib64/libasan.so.1+0x577c7)
#1 0xde9b95 in xmalloc common/common-utils.c:41
#2 0x8c4da2 in elf_read_minimal_symbols /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1147
#3 0x8c55e7 in elf_symfile_read /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1268
[...]
SUMMARY: AddressSanitizer: heap-use-after-free /home/jkratoch/redhat/gdb-test-asan/bfd/elf64-ppc.c:3282 ppc64_elf_get_synthetic_symtab
[...]
==22763==ABORTING
A similar case a few lines later I have fixed in 2010 by:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=3f1eff0a2c7f0e7078f011f55b8e7f710aae0cc2
My testcase does not always reproduce it but at least a bit:
* GDB without ppc64 target (even as a secondary one) is reported as "untested"
* ASAN-built GDB with ppc64 target always crashes (and PASSes with this fix)
* unpatched non-ASAN-built GDB with ppc64 target crashes from commandline
* unpatched non-ASAN-built GDB with ppc64 target PASSes from runtest (?)
gdb/ChangeLog
2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
bfd_canonicalize_symtab.
gdb/testsuite/ChangeLog
2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/cordic.ko.bz2: New file.
* gdb.arch/cordic.ko.debug.bz2: New file.
* gdb.arch/ppc64-symtab-cordic.exp: New file.
gdb/testsuite/ChangeLog
2015-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
PR corefiles/17808
* gdb.arch/i386-biarch-core.core.bz2: New file.
* gdb.arch/i386-biarch-core.exp: New file.
GCC5 defaults to the GNU11 standard for C and warns by default for
implicit function declarations and implicit return types.
https://gcc.gnu.org/gcc-5/porting_to.html
Fixing these issues in the testsuite turns 9 untested and 17 unsupported
testcases into 417 new passes when compiling with GCC5.
gdb/testsuite/ChangeLog:
* gdb.arch/i386-bp_permanent.c (standard): New declaration.
* gdb.base/disp-step-fork.c: Include unistd.h.
* gdb.base/siginfo-obj.c: Include stdio.h.
* gdb.base/siginfo-thread.c: Likewise.
* gdb.mi/non-stop.c: Include unistd.h.
* gdb.mi/nsthrexec.c: Include stdio.h.
* gdb.mi/pthreads.c: Include unistd.h.
* gdb.modula2/unbounded1.c (main): Declare returns int.
* gdb.reverse/consecutive-reverse.c: Likewise.
* gdb.threads/create-fail.c: Include unistd.h.
* gdb.threads/killed.c: Likewise.
* gdb.threads/linux-dp.c: Likewise.
* gdb.threads/non-ldr-exc-1.c: Include stdio.h and string.h.
* gdb.threads/non-ldr-exc-2.c: Likewise.
* gdb.threads/non-ldr-exc-3.c: Likewise.
* gdb.threads/non-ldr-exc-4.c: Likewise.
* gdb.threads/pthreads.c: Include unistd.h.
(main): Declare returns int.
* gdb.threads/tls-main.c (foo): New declaration.
* gdb.threads/watchpoint-fork-mt.c: Define _GNU_SOURCE.
When using aarch64 gdb with gdbserver, floating point registers are
not correctly displayed, as below:
(gdb) info registers fpsr fpcr
fpsr <unavailable>
fpcr <unavailable>
To fix these problems, the missing fpsr and fpcr registers are added
when floating point registers are read/write
Add test for aarch64 floating point
PR server/17457
gdb/gdbserver/
PR server/17457
* linux-aarch64-low.c (AARCH64_FPSR_REGNO): New define.
(AARCH64_FPCR_REGNO): Likewise.
(AARCH64_NUM_REGS): Update to include fpsr/fpcr registers.
(aarch64_fill_fpregset): Add missing fpsr/fpcr registers.
(aarch64_store_fpregset): Likewise.
gdb/testsuite/
PR server/17457
* gdb.arch/aarch64-fp.c: New file.
* gdb.arch/aarch64-fp.exp: New file.
Signed-off-by: Catalin Udma <catalin.udma@freescale.com>
This patch is to use standard_testfile in i386-bp_permanent.exp to replace
existing setting to testfile, srcfile and binfile. So it fixes a problem
in i386-bp_permanent.exp in parallel testing.
$ make -j3 check TESTS='gdb.guile/scm-section-script.exp gdb.arch/i386-bp_permanent.exp'
....
gdb compile failed, /usr/bin/ld: cannot open output file x86/gdb/testsuite/gdb.arch/i386-bp_permanent: No such file or directory
collect2: error: ld returned 1 exit status
gdb/testsuite:
2014-12-05 Yao Qi <yao@codesourcery.com>
* gdb.arch/i386-bp_permanent.exp: Use standard_testfile.
The gdb.arch/i386-bp_permanent.exp test is currently failing an
assertion recently added:
(gdb) stepi
../../src/gdb/infrun.c:2237: internal-error: resume: Assertion `sig != GDB_SIGNAL_0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
FAIL: gdb.arch/i386-bp_permanent.exp: Single stepping past permanent breakpoint. (GDB internal error)
The assertion expects that the only reason we currently need to step a
breakpoint instruction is when we have a signal to deliver. But when
stepping a permanent breakpoint (with or without a signal) we also
reach this code.
The assertion is correct and the permanent breakpoints skipping code
is wrong.
Consider the case of the user doing "step/stepi" when stopped at a
permanent breakpoint. GDB's `resume' calls the
gdbarch_skip_permanent_breakpoint hook and then happily continues
stepping:
/* Normally, by the time we reach `resume', the breakpoints are either
removed or inserted, as appropriate. The exception is if we're sitting
at a permanent breakpoint; we need to step over it, but permanent
breakpoints can't be removed. So we have to test for it here. */
if (breakpoint_here_p (aspace, pc) == permanent_breakpoint_here)
{
gdbarch_skip_permanent_breakpoint (gdbarch, regcache);
}
But since gdbarch_skip_permanent_breakpoint already advanced the PC
manually, this ends up executing the instruction that is _after_ the
breakpoint instruction. The user-visible result is that a single-step
steps two instructions.
The gdb.arch/i386-bp_permanent.exp test is actually ensuring that
that's indeed how things work. It runs to an int3 instruction, does
"stepi", and checks that "leave" was executed with that "stepi". Like
this:
(gdb) b *0x0804848c
Breakpoint 2 at 0x804848c
(gdb) c
Continuing.
Breakpoint 2, 0x0804848c in standard ()
(gdb) disassemble
Dump of assembler code for function standard:
0x08048488 <+0>: push %ebp
0x08048489 <+1>: mov %esp,%ebp
0x0804848b <+3>: push %edi
=> 0x0804848c <+4>: int3
0x0804848d <+5>: leave
0x0804848e <+6>: ret
0x0804848f <+7>: nop
(gdb) si
0x0804848e in standard ()
(gdb) disassemble
Dump of assembler code for function standard:
0x08048488 <+0>: push %ebp
0x08048489 <+1>: mov %esp,%ebp
0x0804848b <+3>: push %edi
0x0804848c <+4>: int3
0x0804848d <+5>: leave
=> 0x0804848e <+6>: ret
0x0804848f <+7>: nop
End of assembler dump.
(gdb)
One would instead expect that a stepi at 0x0804848c stops at
0x0804848d, _before_ the "leave" is executed. This commit changes GDB
this way. Care is taken to make stepping into a signal handler when
the step starts at a permanent breakpoint instruction work correctly.
The patch adjusts gdb.arch/i386-bp_permanent.exp in this direction,
and also makes it work on x86_64 (currently it only works on i*86).
The patch also adds a new gdb.base/bp-permanent.exp test that
exercises many different code paths related to stepping permanent
breakpoints, including the stepping with signals cases. The test uses
"hack/trick" to make it work on all (or most) platforms -- it doesn't
really hard code a breakpoint instruction.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-11-12 Pedro Alves <palves@redhat.com>
* infrun.c (resume): Clear the thread's 'stepped_breakpoint' flag.
Rewrite stepping over a permanent breakpoint.
(thread_still_needs_step_over, proceed): Don't set
stepping_over_breakpoint for permanent breakpoints.
(handle_signal_stop): Don't clear stepped_breakpoint. Also pull
single-step breakpoints out of the target on hardware step
targets.
(process_event_stop_test): If stepping a permanent breakpoint
doesn't hit the step-resume breakpoint, delete the step-resume
breakpoint.
(switch_back_to_stepped_thread): Also check if the stepped thread
has advanced already on hardware step targets.
(currently_stepping): Return true if the thread stepped a
breakpoint.
gdb/testsuite/
2014-11-12 Pedro Alves <palves@redhat.com>
* gdb.arch/i386-bp_permanent.c: New file.
* gdb.arch/i386-bp_permanent.exp: Don't skip on x86_64.
(srcfile): Set to i386-bp_permanent.c.
(top level): Adjust to work in both 32-bit and 64-bit modes. Test
that stepi does not execute the 'leave' instruction, instead of
testing it does execute.
* gdb.base/bp-permanent.c: New file.
* gdb.base/bp-permanent.exp: New file.
Joel contacted me offlist with a question about a warning that one of
his customers was seeing. The message came from the new
linker-debugger interface, which uses SDT probes internally. The
warning said:
(gdb) run
[...]
warning: Probes-based dynamic linker interface failed.
Reverting to original interface.
Argument to arithmetic operation not a number or boolean.
This should not have happened in the environment the customer was
using (RHEL-6.x), so I found it strange. Another thing caught my
attention: the last message, saying "Argument to arithmetic operation
not a number or boolean.".
Joel kindly investigated the issue further, and found the answer for
this. To quote him:
(gdb) set lang c
(gdb) p 48+$ebp
$4 = (void *) 0xffffd0f8
So far so good. But...
(gdb) set lang ada
(gdb) p 48+$ebp
Argument to arithmetic operation not a number or boolean.
Ooops! Interestingly, if you revert the order of the operands...
(gdb) p $ebp+48
$5 = (access void) 0xffffd0f8
So the problem is doing pointer arithmetics when the language is set
to Ada.
I remembered that, during the parsing and the evaluation of SDT probe
arguments, the code sets the language as current_language, because, at
that time, I thought it was not necessary to worry about the language
given that the code implements its own parser. I was wrong. So here
is a patch to fix that, by setting the language as C, which should
guarantee that the maths are done in the right way (TM).
It was somewhat hard to find a reproducer for this issue. In the end,
what I had to do was to create a testcase that used the %ebp register
on some displacement (e.g., "-4(%ebp)"), which finally triggered the
bug. I am not sure why I could not trigger it when using other
registers, but I did not want to spend too much time investigating
this issue, which seemed like an Ada issue. Also, because of this
peculiar way to trigger the problem, the testcase only covers x86-like
targets (i.e., i*86 and x86_64 with -m32).
Joel kindly tested this for me, and it worked. I also ran a full
regression test here on my Fedora 20 x86_64, and everything is fine.
I will push this patch in a few days if there are no comments.
gdb/ChangeLog:
2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
* stap-probe.c (stap_parse_argument): Initialize expout explicitly
using language_c, instead of current_language.
gdb/testsuite/ChangeLog:
2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.arch/stap-eval-lang-ada.S: Likewise.
* gdb.arch/stap-eval-lang-ada.c: Likewise.
* gdb.arch/stap-eval-lang-ada.exp: New file.
See:
https://sourceware.org/ml/gdb-patches/2014-09/msg00404.html
We have a number of places that do gdb_run_cmd followed by gdb_expect,
when it would be better to use gdb_test_multiple or gdb_test.
This converts all that "grep gdb_run_cmd -A 2 | grep gdb_expect"
found.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/testsuite/
2014-09-12 Pedro Alves <palves@redhat.com>
* gdb.arch/gdb1558.exp: Replace uses of gdb_expect after
gdb_run_cmd with gdb_test_multiple or gdb_test throughout.
* gdb.arch/i386-size-overlap.exp: Likewise.
* gdb.arch/i386-size.exp: Likewise.
* gdb.arch/i386-unwind.exp: Likewise.
* gdb.base/a2-run.exp: Likewise.
* gdb.base/break.exp: Likewise.
* gdb.base/charset.exp: Likewise.
* gdb.base/chng-syms.exp: Likewise.
* gdb.base/commands.exp: Likewise.
* gdb.base/dbx.exp: Likewise.
* gdb.base/find.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/jit-simple.exp: Likewise.
* gdb.base/reread.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/step-bt.exp: Likewise.
* gdb.cp/mb-inline.exp: Likewise.
* gdb.cp/mb-templates.exp: Likewise.
* gdb.objc/basicclass.exp: Likewise.
* gdb.threads/killed.exp: Likewise.
The problem is that rs6000_frame_cache attempts to read the stack backchain via
read_memory_unsigned_integer, which throws an exception if the stack pointer is
invalid. With this patch, it calls safe_read_memory_integer instead, which
doesn't throw an exception and allows for safe handling of that situation.
gdb/ChangeLog
2014-09-12 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Ulrich Weigand <uweigand@de.ibm.com>
PR tdep/17379
* rs6000-tdep.c (rs6000_frame_cache): Use safe_read_memory_integer
instead of read_memory_unsigned_integer.
gdb/testcase/ChangeLog
2014-09-12 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
PR tdep/17379
* gdb.arch/powerpc-stackless.S: New file.
* gdb.arch/powerpc-stackless.exp: New file.
This patch is a fix to PR gdb/17235. The bug is about an unused
variable that got declared and set during one of the parsing phases of
an SDT probe's argument. I took the opportunity to rewrite some of the
code to improve the parsing. The bug was actually a thinko, because
what I wanted to do in the code was to discard the number on the string
being parsed.
During this portion, the code identifies that it is dealing with an
expression that begins with a sign ('+', '-' or '~'). This means that
the expression could be:
- a numeric literal (e.g., '+5')
- a register displacement (e.g., '-4(%rsp)')
- a subexpression (e.g., '-(2*3)')
So, after saving the sign and moving forward 1 char, now the code needs
to know if there is a digit followed by a register displacement prefix
operand (e.g., '(' on x86_64). If yes, then it is a register
operation. If not, then it will be handled recursively, and the code
will later apply the requested operation on the result (either a '+', a
'-' or a '~').
With the bug, the code was correctly discarding the digit (though using
strtol unnecessarily), but it wasn't properly dealing with
subexpressions when the register indirection prefix was '(', like on
x86_64. This patch also fixes this bug, and includes a testcase. It
passes on x86_64 Fedora 20.
This commit renames nine files that contain code used by both 32- and
64-bit Intel ports such that their names are prefixed with "x86"
rather than "i386". All types, functions and variables within these
files are likewise renamed such that their names are prefixed with
"x86" rather than "i386". This makes GDB follow the convention used
by gdbserver such that 32-bit Intel code lives in files called
"i386-*", 64-bit Intel code lives in files called "amd64-*", and code
for both 32- and 64-bit Intel lives in files called "x86-*".
This commit only renames OS-independent files. The Linux ports of
both GDB and gdbserver now follow the i386/amd64/x86 convention fully.
Some ports still use the old convention where "i386" in file/function/
type/variable names can mean "32-bit only" or "32- and 64-bit" but I
don't want to touch ports I can't fully test except where absolutely
necessary.
gdb/ChangeLog:
* i386-nat.h: Renamed as...
* x86-nat.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* i386-nat.c: Renamed as...
* x86-nat.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* common/i386-xstate.h: Renamed as...
* common/x86-xstate.h: New file. All type, function and variable
name prefixes changed from "i386_" to "x86_". All references
updated.
* nat/i386-cpuid.h: Renamed as...
* nat/x86-cpuid.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* nat/i386-gcc-cpuid.h: Renamed as...
* nat/x86-gcc-cpuid.h: New file. All type, function and variable
name prefixes changed from "i386_" to "x86_". All references
updated.
* nat/i386-dregs.h: Renamed as...
* nat/x86-dregs.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* nat/i386-dregs.c: Renamed as...
* nat/x86-dregs.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
gdb/gdbserver/ChangeLog:
* i386-low.h: Renamed as...
* x86-low.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* i386-low.c: Renamed as...
* x86-low.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
clang was using eax to construct %0 here:
asm ("mov %%eax, 0(%0)\n\t"
"mov %%ebx, 4(%0)\n\t"
"mov %%ecx, 8(%0)\n\t"
"mov %%edx, 12(%0)\n\t"
"mov %%esi, 16(%0)\n\t"
"mov %%edi, 20(%0)\n\t"
: /* no output operands */
: "r" (data)
: "eax", "ebx", "ecx", "edx", "esi", "edi");
which caused amd64-word.exp (and others similarly) to fail.
It's a perfectly legit thing for clang to do given the available data.
The patch fixes this by marking the registers as live from the
time of the preceding breakpoint.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-pseudo.c (main): Rewrite to better specify when
eax,etc. are live with values set by gdb and thus the compiler can't
use them.
* gdb.arch/i386-pseudo.c (main): Ditto.
The __flash qualifier is part of the named address spaces for AVR [1]. It
allows putting read-only data in the flash memory, normally reserved for
code.
When used together with a pointer, the DW_AT_address_class attribute is set
to 1 and allows GDB to detect that when it will be dereferenced, the data
will be loaded from the flash memory (with the LPM instruction).
We can now properly debug the following code:
~~~
const __flash char data_in_flash = 0xab;
int
main (void)
{
const __flash char *pointer_to_flash = &data_in_flash;
}
~~~
~~~
(gdb) print pointer_to_flash
$1 = 0x1e8 <data_in_flash> "\253"
(gdb) print/x *pointer_to_flash
$2 = 0xab
(gdb) x/x pointer_to_flash
0x1e8 <data_in_flash>: 0xXXXXXXab
~~~
Whereas previously, GDB would revert to the default address space which is
RAM and mapped in higher memory:
~~~
(gdb) print pointer_to_flash
$1 = 0x8001e8 ""
~~~
[1] https://gcc.gnu.org/onlinedocs/gcc/Named-Address-Spaces.html
2014-07-15 Pierre Langlois <pierre.langlois@embecosm.com>
gdb/
* avr-tdep.c (AVR_TYPE_ADDRESS_CLASS_FLASH): New macro.
(AVR_TYPE_INSTANCE_FLAG_ADDRESS_CLASS_FLASH): Likewise.
(avr_address_to_pointer): Check for AVR_TYPE_ADDRESS_CLASS_FLASH.
(avr_pointer_to_address): Likewise.
(avr_address_class_type_flags): New function.
(avr_address_class_type_flags_to_name): Likewise.
(avr_address_class_name_to_type_flags): Likewise.
(avr_gdbarch_init): Set address_class_type_flags,
address_class_type_flags_to_name and
address_class_name_to_type_flags.
gdb/testsuite/
* gdb.arch/avr-flash-qualifer.c: New.
* gdb.arch/avr-flash-qualifer.exp: New.
On x86_64 with -m32 or on i686 it will:
Running ./gdb.arch/amd64-stap-special-operands.exp ...
gdb compile failed, amd64-stap-triplet.c: Assembler messages:
amd64-stap-triplet.c:35: Error: bad register name `%rbp'
amd64-stap-triplet.c:38: Error: bad register name `%rsp'
amd64-stap-triplet.c:40: Error: bad register name `%rbp)'
amd64-stap-triplet.c:41: Error: bad register name `%rsi'
amd64-stap-triplet.c:42: Error: bad register name `%rbp)'
/tmp/ccjOdmpl.s:63: Error: bad register name `%rbp'
2014-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target.
* gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
* gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target.
Message-ID: <20140622211401.GA3716@host2.jankratochvil.net>
https://sourceware.org/ml/gdb-patches/2014-05/msg00737.html
Currently a MEMORY_ERROR raised during unwinding a frame will cause the
unwind to stop with an error message, for example:
(gdb) bt
#0 breakpt () at amd64-invalid-stack-middle.c:27
#1 0x00000000004008f0 in func5 () at amd64-invalid-stack-middle.c:32
#2 0x0000000000400900 in func4 () at amd64-invalid-stack-middle.c:38
#3 0x0000000000400910 in func3 () at amd64-invalid-stack-middle.c:44
#4 0x0000000000400928 in func2 () at amd64-invalid-stack-middle.c:50
Cannot access memory at address 0x2aaaaaab0000
However, frame #4 is marked as being the end of the stack unwind, so a
subsequent request for the backtrace looses the error message, such as:
(gdb) bt
#0 breakpt () at amd64-invalid-stack-middle.c:27
#1 0x00000000004008f0 in func5 () at amd64-invalid-stack-middle.c:32
#2 0x0000000000400900 in func4 () at amd64-invalid-stack-middle.c:38
#3 0x0000000000400910 in func3 () at amd64-invalid-stack-middle.c:44
#4 0x0000000000400928 in func2 () at amd64-invalid-stack-middle.c:50
When fetching the backtrace, or requesting the stack depth using the MI
interface the situation is even worse, the first time a request is made
we encounter the memory error and so the MI returns an error instead of
the correct result, for example:
(gdb) -stack-info-depth
^error,msg="Cannot access memory at address 0x2aaaaaab0000"
Or,
(gdb) -stack-list-frames
^error,msg="Cannot access memory at address 0x2aaaaaab0000"
However, once one of these commands has been used gdb has, internally,
walked the stack and figured that out that frame #4 is the bottom of the
stack, so the second time an MI command is tried you'll get the "expected"
result:
(gdb) -stack-info-depth
^done,depth="5"
Or,
(gdb) -stack-list-frames
^done,stack=[frame={level="0", .. snip lots .. }]
After this patch the MEMORY_ERROR encountered during the frame unwind is
attached to frame #4 as the stop reason, and is displayed in the CLI each
time the backtrace is requested. In the MI, catching the error means that
the "expected" result is returned the first time the MI command is issued.
So, from the CLI the results of the backtrace will be:
(gdb) bt
#0 breakpt () at amd64-invalid-stack-middle.c:27
#1 0x00000000004008f0 in func5 () at amd64-invalid-stack-middle.c:32
#2 0x0000000000400900 in func4 () at amd64-invalid-stack-middle.c:38
#3 0x0000000000400910 in func3 () at amd64-invalid-stack-middle.c:44
#4 0x0000000000400928 in func2 () at amd64-invalid-stack-middle.c:50
Backtrace stopped: Cannot access memory at address 0x2aaaaaab0000
Each and every time that the backtrace is requested, while the MI output
will similarly be consistently:
(gdb) -stack-info-depth
^done,depth="5"
Or,
(gdb) -stack-list-frames
^done,stack=[frame={level="0", .. snip lots .. }]
gdb/ChangeLog:
* frame.c (struct frame_info): Add stop_string field.
(get_prev_frame_always_1): Renamed from get_prev_frame_always.
(get_prev_frame_always): Old content moved into
get_prev_frame_always_1. Call get_prev_frame_always_1 inside
TRY_CATCH, handle MEMORY_ERROR exceptions.
(frame_stop_reason_string): New function definition.
* frame.h (unwind_stop_reason_to_string): Extend comment to
mention frame_stop_reason_string.
(frame_stop_reason_string): New function declaration.
* stack.c (frame_info): Switch to frame_stop_reason_string.
(backtrace_command_1): Switch to frame_stop_reason_string.
* unwind_stop_reason.def: Add UNWIND_MEMORY_ERROR.
(LAST_ENTRY): Changed to UNWIND_MEMORY_ERROR.
* guile/lib/gdb.scm: Add FRAME_UNWIND_MEMORY_ERROR to export list.
gdb/doc/ChangeLog:
* guile.texi (Frames In Guile): Mention FRAME_UNWIND_MEMORY_ERROR.
* python.texi (Frames In Python): Mention
gdb.FRAME_UNWIND_MEMORY_ERROR.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-invalid-stack-middle.exp: Update expected results.
* gdb.arch/amd64-invalid-stack-top.exp: Likewise.
https://sourceware.org/ml/gdb-patches/2014-05/msg00712.html
If an error is thrown during computing a frame id then the frame is left
in existence but without a valid frame id, this will trigger internal
errors if/when the frame is later visited (for example in a backtrace).
This patch catches errors raised while computing the frame id, and
arranges for the new frame, the one without a frame id, to be removed
from the linked list of frames.
gdb/ChangeLog:
* frame.c (remove_prev_frame): New function.
(get_prev_frame_if_no_cycle): Create / discard cleanup using
remove_prev_frame.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-invalid-stack-middle.S: New file.
* gdb.arch/amd64-invalid-stack-middle.c: New file.
* gdb.arch/amd64-invalid-stack-middle.exp: New file.
* gdb.arch/amd64-invalid-stack-top.c: New file.
* gdb.arch/amd64-invalid-stack-top.exp: New file.
gdb/Changelog:
* aarch64-tdep.c (aarch64_software_single_step): New function.
(aarch64_gdbarch_init): Handle single stepping of atomic sequences
with aarch64_software_single_step.
gdb/testsuite/ChangeLog:
* gdb.arch/aarch64-atomic-inst.c: New file.
* gdb.arch/aarch64-atomic-inst.exp: New file.
This commit is actually an update to make the parser in
gdb/stap-probe.c be aware of all the possible prefixes that a probe
argument can have. According to the section "Argument Format" in:
<https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation>
The bitness of the arguments can be 8, 16, 32 or 64 bits, signed or
unsigned. Currently GDB recognizes only 32 and 64-bit arguments.
This commit extends this. It also provides a testcase, only for
x86_64 systems.
gdb/
2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
* stap-probe.c (enum stap_arg_bitness): New enums to represent 8
and 16-bit signed and unsigned arguments. Update comment.
(stap_parse_probe_arguments): Extend code to handle such
arguments. Use warning instead of complaint to notify about
unrecognized bitness.
gdb/testsuite/
2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.arch/amd64-stap-optional-prefix.S (main): Add several
probes to test for bitness recognition.
* gdb.arch/amd64-stap-optional-prefix.exp
(test_probe_value_without_reg): New procedure.
Add code to test for different kinds of bitness.
This commit fixes PR breakpoints/16889, which is about a bug that
triggers when GDB tries to parse probes whose arguments do not contain
the initial (and optional) "N@" part. For reference sake, the de
facto format is described here:
<https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation>
Anyway, this PR actually uncovered two bugs (related) that were
happening while parsing the arguments. The first one was that the
parser *was* catching *some* arguments that were missing the "N@"
part, but it wasn't correctly setting the argument's type. This was
causing a NULL pointer being dereferenced, ouch...
The second bug uncovered was that the parser was not catching all of
the cases for a probe which did not provide the "N@" part. The fix
for that was to simplify the check that the code was making to
identify non-prefixed probes. The code is simpler and easier to read
now.
I am also providing a testcase for this bug, only for x86_64
architectures.
gdb/
2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/16889
* stap-probe.c (stap_parse_probe_arguments): Simplify
check for non-prefixed probes (i.e., probes whose
arguments do not start with "N@"). Always set the
argument type to a sane value.
gdb/testsuite/
2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/16889
* gdb.arch/amd64-stap-optional-prefix.S: New file.
* gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
This patch adds support for the Intel(R) Advanced Vector
Extensions 512 (Intel(R) AVX-512) registers. Native and remote
debugging are covered by this patch.
Intel(R) AVX-512 is an extension to AVX to support 512-bit wide
SIMD registers in 64-bit mode (XMM0-XMM31, YMM0-YMM31, ZMM0-ZMM31).
The number of available registers in 32-bit mode is still 8
(XMM0-7, YMM0-7, ZMM0-7). The lower 256-bits of the ZMM registers
are aliased to the respective 256-bit YMM registers. The lower
128-bits are aliased to the respective 128-bit XMM registers.
There are also 8 new, dedicated mask registers (K0-K7) in both 32-bit
mode and 64-bit mode.
For more information please see
Intel(R) Developer Zone: Intel(R) AVX
http://software.intel.com/en-us/intel-isa-extensions#pid-16007-1495
Intel(R) Architecture Instruction Set Extensions Programming Reference:
http://software.intel.com/en-us/file/319433-017pdf
2014-04-24 Michael Sturm <michael.sturm@mintel.com>
Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add
AVX512 registers.
(amd64_linux_read_description): Add code to handle AVX512 xstate
mask and return respective tdesc.
* amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c
and features/i386/x32-avx512-linux.c.
(amd64_linux_gregset_reg_offset): Add AVX512 registers.
(amd64_linux_core_read_description): Add code to handle AVX512
xstate mask and return respective tdesc.
(_initialize_amd64_linux_tdep): Initialize AVX512 tdesc.
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum
calculation.
(AMD64_LINUX_NUM_REGS): Adjust to new number of registers.
(tdesc_amd64_avx512_linux): New prototype.
(tdesc_x32_avx512_linux): Likewise.
* amd64-tdep.c: Include features/i386/amd64-avx512.c and
features/i386/x32-avx512.c.
(amd64_ymm_avx512_names): New register names for pseudo
registers YMM16-31.
(amd64_ymmh_avx512_names): New register names for raw registers
YMMH16-31.
(amd64_k_names): New register names for K registers.
(amd64_zmmh_names): New register names for ZMM raw registers.
(amd64_zmm_names): New registers names for ZMM pseudo registers.
(amd64_xmm_avx512_names): New register names for XMM16-31
registers.
(amd64_pseudo_register_name): Add code to return AVX512 pseudo
registers.
(amd64_init_abi): Add code to intitialize AVX512 tdep variables
if feature is present.
(_initialize_amd64_tdep): Call AVX512 tdesc initializers.
* amd64-tdep.h (enum amd64_regnum): Add AVX512 registers.
(AMD64_NUM_REGS): Adjust to new number of registers.
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of
registers supplied via XSTATE by AVX512 registers.
(i386_linux_read_description): Add case for AVX512.
* i386-linux-tdep.c: Include i386-avx512-linux.c.
(i386_linux_gregset_reg_offset): Add AVX512 registers.
(i386_linux_core_read_description): Add case for AVX512.
(i386_linux_init_abi): Install supported register note section
for AVX512.
(_initialize_i386_linux_tdep): Add call to tdesc init function for
AVX512.
* i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of
registers to be number of zmm7h + 1.
(tdesc_i386_avx512_linux): Add tdesc for AVX512 registers.
* i386-tdep.c: Include features/i386/i386-avx512.c.
(i386_zmm_names): Add ZMM pseudo register names array.
(i386_zmmh_names): Add ZMM raw register names array.
(i386_k_names): Add K raw register names array.
(num_lower_zmm_regs): Add constant for the number of lower ZMM
registers. AVX512 has 16 more ZMM registers than there are YMM
registers.
(i386_zmmh_regnum_p): Add function to look up register number of
ZMM raw registers.
(i386_zmm_regnum_p): Likewise for ZMM pseudo registers.
(i386_k_regnum_p): Likewise for K raw registers.
(i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw
registers added by AVX512.
(i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo
registers added by AVX512.
(i386_xmm_avx512_regnum_p): Likewise for additional XMM registers
added by AVX512.
(i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31.
(i386_pseudo_register_name): Add ZMM pseudo registers.
(i386_zmm_type): Construct and return vector registers type for ZMM
registers.
(i386_pseudo_register_type): Return appropriate type for YMM16-31,
ZMM0-31 pseudo registers and K registers.
(i386_pseudo_register_read_into_value): Add code to read K, ZMM
and YMM16-31 registers from register cache.
(i386_pseudo_register_write): Add code to write K, ZMM and
YMM16-31 registers.
(i386_register_reggroup_p): Add code to include/exclude AVX512
registers in/from respective register groups.
(i386_validate_tdesc_p): Handle AVX512 feature, add AVX512
registers if feature is present in xcr0.
(i386_gdbarch_init): Add code to initialize AVX512 feature
variables in tdep structure, wire in pseudo registers and call
initialize_tdesc_i386_avx512.
* i386-tdep.h (struct gdbarch_tdep): Add AVX512 related
variables.
(i386_regnum): Add AVX512 registers.
(I386_SSE_NUM_REGS): New define for number of SSE registers.
(I386_AVX_NUM_REGS): Likewise for AVX registers.
(I386_AVX512_NUM_REGS): Likewise for AVX512 registers.
(I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are
512 bits wide.
(i386_xmm_avx512_regnum_p): New prototype for register look up.
(i386_ymm_avx512_regnum_p): Likewise.
(i386_k_regnum_p): Likewise.
(i386_zmm_regnum_p): Likewise.
(i386_zmmh_regnum_p): Likewise.
* i387-tdep.c : Update year in copyright notice.
(xsave_ymm_avx512_offset): New table for YMM16-31 offsets in
XSAVE buffer.
(XSAVE_YMM_AVX512_ADDR): New macro.
(xsave_xmm_avx512_offset): New table for XMM16-31 offsets in
XSAVE buffer.
(XSAVE_XMM_AVX512_ADDR): New macro.
(xsave_avx512_k_offset): New table for K register offsets in
XSAVE buffer.
(XSAVE_AVX512_K_ADDR): New macro.
(xsave_avx512_zmm_h_offset): New table for ZMM register offsets
in XSAVE buffer.
(XSAVE_AVX512_ZMM_H_ADDR): New macro.
(i387_supply_xsave): Add code to supply AVX512 registers to XSAVE
buffer.
(i387_collect_xsave): Add code to collect AVX512 registers from
XSAVE buffer.
* i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number
of XMM16-31 registers.
(I387_NUM_K_REGS): New define for number of K registers.
(I387_K0_REGNUM): New define for K0 register number.
(I387_NUM_ZMMH_REGS): New define for number of ZMMH registers.
(I387_ZMM0H_REGNUM): New define for ZMM0H register number.
(I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31
registers.
(I387_YMM16H_REGNUM): New define for YMM16H register number.
(I387_XMM16_REGNUM): New define for XMM16 register number.
(I387_YMM0_REGNUM): New define for YMM0 register number.
(I387_KEND_REGNUM): New define for last K register number.
(I387_ZMMENDH_REGNUM): New define for last ZMMH register number.
(I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register
number.
(I387_XMM_AVX512_END_REGNUM): New define for XMM31 register
number.
* common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE
size.
* features/Makefile: Add AVX512 related files.
* features/i386/32bit-avx512.xml: New file.
* features/i386/64bit-avx512.xml: Likewise.
* features/i386/amd64-avx512-linux.c: Likewise.
* features/i386/amd64-avx512-linux.xml: Likewise.
* features/i386/amd64-avx512.c: Likewise.
* features/i386/amd64-avx512.xml: Likewise.
* features/i386/i386-avx512-linux.c: Likewise.
* features/i386/i386-avx512-linux.xml: Likewise.
* features/i386/i386-avx512.c: Likewise.
* features/i386/i386-avx512.xml: Likewise.
* features/i386/x32-avx512-linux.c: Likewise.
* features/i386/x32-avx512-linux.xml: Likewise.
* features/i386/x32-avx512.c: Likewise.
* features/i386/x32-avx512.xml: Likewise.
* regformats/i386/amd64-avx512-linux.dat: New file.
* regformats/i386/amd64-avx512.dat: Likewise.
* regformats/i386/i386-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx512.dat: Likewise.
* regformats/i386/x32-avx512-linux.dat: Likewise.
* regformats/i386/x32-avx512.dat: Likewise.
* NEWS: Add note about new support for AVX512.
testsuite/
* Makefile.in (EXECUTABLES): Added i386-avx512.
* gdb.arch/i386-avx512.c: New file.
* gdb.arch/i386-avx512.exp: Likewise.
gdbserver/
* Makefile.in: Added rules to handle new files
i386-avx512.c i386-avx512-linux.c amd64-avx512.c
amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c.
* configure.srv (srv_i386_regobj): Add i386-avx512.o.
(srv_i386_linux_regobj): Add i386-avx512-linux.o.
(srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o.
(srv_amd64_linux_regobj): Add amd64-avx512-linux.o and
x32-avx512-linux.o.
(srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml.
(srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and
i386/x32-avx512.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and
i386/x32-avx512-linux.xml.
* i387-fp.c (num_avx512_k_registers): New constant for number
of K registers.
(num_avx512_zmmh_low_registers): New constant for number of
lower ZMM registers (0-15).
(num_avx512_zmmh_high_registers): New constant for number of
higher ZMM registers (16-31).
(num_avx512_ymmh_registers): New contant for number of higher
YMM registers (ymm16-31 added by avx521 on x86_64).
(num_avx512_xmm_registers): New constant for number of higher
XMM registers (xmm16-31 added by AVX512 on x86_64).
(struct i387_xsave): Add space for AVX512 registers.
(i387_cache_to_xsave): Change raw buffer size to 64 characters.
Add code to handle AVX512 registers.
(i387_xsave_to_cache): Add code to handle AVX512 registers.
* linux-x86-low.c (init_registers_amd64_avx512_linux): New
prototypei from generated file.
(tdesc_amd64_avx512_linux): Likewise.
(init_registers_x32_avx512_linux): Likewise.
(tdesc_x32_avx512_linux): Likewise.
(init_registers_i386_avx512_linux): Likewise.
(tdesc_i386_avx512_linux): Likewise.
(x86_64_regmap): Add AVX512 registers.
(x86_linux_read_description): Add code to handle AVX512 XSTATE
mask.
(initialize_low_arch): Add code to initialize AVX512 registers.
doc/
* gdb.texinfo (i386 Features): Add description of AVX512
registers.
Change-Id: Ifc4c08c76b85dbec18d02efdbe6182e851584438
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
The current ppc64 single step over atomic sequence testcase is written
in C and breaks with some versions of gcc. Convert the test to
assembly and use stepi to step through it.
gdb/testsuite/
2014-04-01 Anton Blanchard <anton@samba.org>
* gdb.arch/ppc64-atomic-inst.c: Remove.
* gdb.arch/ppc64-atomic-inst.S: New file.
* gdb.arch/ppc64-atomic-inst.exp: Adapt for asm based testcase.
This is the continuation of what Joel proposed on:
<https://sourceware.org/ml/gdb-patches/2013-12/msg00977.html>
Now that I have already submitted and pushed the patch to split
i386_stap_parse_special_token into two smaller functions, it is indeed
simpler to understand this patch.
It occurs because, on x86, triplet displacement operands are allowed
(like "-4+8-20(%rbp)"), and the current parser for this expression is
buggy. It does not correctly extract the register name from the
expression, which leads to incorrect evaluation. The parser was also
being very "generous" with the expression, so I included a few more
checks to ensure that we're indeed dealing with a triplet displacement
operand.
This patch also includes testcases for the two different kind of
expressions that can be encountered on x86: the triplet displacement
(explained above) and the three-argument displacement (as in
"(%rbx,%ebx,-8)"). The tests are obviously arch-dependent and are
placed under gdb.arch/.
Message-ID: <m3mwj1j12v.fsf@redhat.com>
URL: <https://sourceware.org/ml/gdb-patches/2014-01/msg00310.html>
gdb/
2014-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR tdep/16397
* i386-tdep.c (i386_stap_parse_special_token_triplet): Check if a
number comes after the + or - signs. Adjust length of register
name to be extracted.
gdb/testsuite/
2014-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR tdep/16397
* gdb.arch/amd64-stap-special-operands.exp: New file.
* gdb.arch/amd64-stap-three-arg-disp.S: Likewise.
* gdb.arch/amd64-stap-three-arg-disp.c: Likewise.
* gdb.arch/amd64-stap-triplet.S: Likewise.
* gdb.arch/amd64-stap-triplet.c: Likewise.
gdb/testsuite/
2014-02-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix i386-sse-stack-align.exp regression since GDB_PARALLEL.
* gdb.arch/i386-sse-stack-align.exp: Use standard_output_file.
The powerpc64le-linux ABI specifies that when a 128-bit DFP value is
passed in a pair of floating-point registers, the first register holds
the most-significant part of the value. This is as opposed to the
usual rule on little-endian systems, where the first register would
hold the least-significant part.
This affects two places in GDB, the read/write routines for the
128-bit DFP pseudo-registers, and the function call / return
sequence. For the former, current code already distinguishes
between big- and little-endian targets, but gets the latter
wrong. This is presumably because *GCC* also got it wrong,
and GDB matches the old GCC behavior. But GCC is now fixed:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg02145.html
so GDB needs to be fixed too. (Old code shouldn't really be
an issue since there is no code "out there" so far that uses
dfp128 on little-endian ...)
gdb/ChangeLog:
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
within a register pair holding a DFP 128-bit value on little-endian.
(ppc64_sysv_abi_return_value_base): Likewise.
* rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
(dfp_pseudo_register_write): Likewise.
gdb/testsuite/ChangeLog:
* gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
Many VSX test were failing on powerpc64le-linux, since -as opposed to the
AltiVec tests- there never were little-endian versions of the test patterns.
This patch adds such patterns, along the lines of altivec-regs.exp.
In addition, there is an actual code change required: For those VSX
registers that overlap a floating-point register, the FP register
overlaps the most-significant half of the VSX register both on big-
and little-endian systems. However, on little-endian systems, that
half is stored at an offset of 8 bytes (not 0). This works already
for the "real" FP registers, but current code gets it wrong for
the "extended" pseudo FP register GDB generates for the second
half of the VSX register bank.
This patch updates the corresponding pseudo read/write routines
to take the appropriate offset into consideration.
gdb/ChangeLog:
* rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
of the overlapped FP register within the VSX register on little-
endian platforms.
(efpr_pseudo_register_write): Likewise.
gdb/testsuite/ChangeLog:
* gdb.arch/vsx-regs.exp: Check target endianness. Provide variants
of the test patterns for use on little-endian systems.
A couple of AltiVec tests fail spuriously on powerpc64le-linux, because
they compare against an incorrect pattern. Note that those tests already
contain little-endian variants of the patterns, but those seem to have
bit-rotted a bit: when outputting a vector, GDB no longer omits trailing
zero elements (as it used to do in the past).
This patch updates the pattern to the new GDB output behavior.
In addition, the patch updates the endian test to use the new
gdb_test_multiple logic instead of gdb_expect.
gdb/testsuite/ChangeLog:
* gdb.arch/altivec-regs.exp: Use gdb_test_multiple for endian test.
(decimal_vector): Fix for little-endian.
breakpoint is set in a `ta 0x6d´ which is not a sigreturn syscall. In
these cases no rt_frame exists in the stack and thus the read PC is
wrong.
ChangeLog
2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
the sigreturn register save area only if the syscall is
sigreturn.
testsuite/ChangeLog
2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.arch/sparc-sysstep.exp: New file.
* gdb.arch/sparc-sysstep.c: Likewise.
* gdb.arch/Makefile.in (EXECUTABLES): Add sparc-sysstep.
Correct the patterns in the gdb_test_multiple invocation.
testsuite/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.arch/s390-multiarch.exp (test_linux_v2): Add $gdb_prompt to
the patterns in gdb_test_multiple.
This fixes parts of gdb.arch to be parallel-safe.
I only changed the bits I could test on this machine.
I don't have access to many of the machines needed to fully switch
gdb.arch; but I am happy to provide advice to others attempting this.
Or, I can send an untested patch to convert it all.
Tested on x86-64 Fedora 18.
* gdb.arch/amd64-byte.exp: Use standard_testfile,
clean_restart.
* gdb.arch/amd64-disp-step.exp: Use standard_testfile.
* gdb.arch/amd64-dword.exp: Use standard_testfile,
clean_restart.
* gdb.arch/amd64-entry-value-param.exp: Use standard_testfile.
* gdb.arch/amd64-entry-value.exp: Use standard_testfile.
* gdb.arch/amd64-prologue-xmm.exp: Use standard_testfile.
* gdb.arch/amd64-word.exp: Use standard_testfile,
clean_restart.
* gdb.arch/i386-avx.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-byte.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-disp-step.exp: Use standard_testfile.
* gdb.arch/i386-dr3-watch.exp: Use standard_testfile.
* gdb.arch/i386-permbkpt.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-signal.exp: Use standard_testfile.
* gdb.arch/i386-size-overlap.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-sse.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-unwind.exp: Use standard_testfile.
* gdb.arch/i386-word.exp: Use standard_testfile, clean_restart.
We've currently got 3 files doing open coded implementations of cpuid.
Each has its own set of workarounds and varying levels of how well
they're written and are generally hardcoded to specific cpuid functions.
If you try to build the latest gdb as a PIE on an i386 system, the build
will fail because one of them lacks PIC workarounds (wrt ebx).
Specifically, we have:
common/linux-btrace.c:
two copies of cpuid asm w/specific args, one has no workarounds
while the other implicitly does to avoid memcpy
go32-nat.c:
two copies of cpuid asm w/specific args, one has workarounds to
avoid memcpy
gdb/testsuite/gdb.arch/i386-cpuid.h:
one general cpuid asm w/many workarounds copied from older gcc
Fortunately, that last header there is pretty damn good -- it handles
lots of edge cases, the code is nice & tight (uses gcc asm operands
rather than manual movs), and is already almost a general library type
header. It's also the basis of what is now the public cpuid.h that is
shipped with gcc-4.3+.
So what I've done is pull that test header out and into gdb/common/
(not sure if there's a better place), synced to the version found in
gcc-4.8.0, put a wrapper API around it, and then cut over all the
existing call points to this new header.
Since the func already has support for "is cpuid supported on this proc",
it makes it trivial to push the i386/x86_64 ifdefs down into this wrapper
API too. Now it can be safely used for all targets and gcc will elide
the unused code for us.
I've verified the gdb.arch testsuite still passes, and this code compiles
for an armv7a host as well as x86_64. The go32-nat code has been left
ifdef-ed out until someone can test & verify the new stuff works (and if
it doesn't, figure out how to make the new code work).
URL: https://bugs.gentoo.org/467806
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The test case gdb.arch/system-gcore.exp is almost an identical copy of
gdb.base/gcore.exp. The only functional change is the additional
comparison of the "info reg system" command output.
It should be safe to perform this comparison on all architectures.
Thus the patch removes the arch-specific version and adds "info reg
system" to the common gcore test case instead.
Tested on i686-linux and s390x-linux.
gdb/testsuite/Changelog:
2013-05-07 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.arch/system-gcore.exp: Remove.
* gdb.arch/gcore.c: Remove.
* gdb.base/gcore.exp: Add "info reg system".