* gdbarch.sh (IEEE_FLOAT): New entry.
* gdbarch.c, gdbarch.h: Regenerated.
* valprint.c (IEEE_FLOAT): Provide a default #definition for this.
(print_floating): Use IEEE_FLOAT as if it were an expression; use
the code specific to IEEE-format numbers whenever the value of
IEEE_FLOAT is non-zero.
* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
config/h8300/tm-h8300.h, config/i386/tm-i386.h,
config/i960/tm-i960.h, config/m88k/tm-m88k.h,
config/mips/tm-mips.h, config/pa/tm-hppa.h,
config/sparc/tm-sparc.h, config/delta/tm-delta.h,
config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
IEEE_FLOAT, make sure they give it the value (1).
* valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
more function-like.
(default_coerce_float_to_double, standard_coerce_float_to_double):
New functions.
(value_arg_coerce): Adjust for new definition.
* value.h (default_coerce_float_to_double,
standard_coerce_float_to_double): New declarations for the above.
* gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
* gdbarch.c, gdbarch.h: Regenerated.
* tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
definitions.
* mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
function here.
(mips_gdbarch_init): Install that as our coerce_float_to_double
function.
* utils.c: <readline/readline.h> instead of "readline/readline.h".
* configure.in (TERM_LIB): Search for the appropriate term library
on the host system.
* configure: Regenerated.
* Makefile.in (TERMCAP): Set based on autoconf check.
* config/*/*.mh: Don't override TERMCAP setting.
files).
* (SUBDIRS): Remove mswin.
* Change procedure for creating init.c. Speeds things up quite a
bit.
* config.in configure configure.in: Check for select, poll.
* Check for OSF header files before including hpux-thread.o.
* Don't configure doc or testsuite when building under MSVC.
* findvar.c value.h (read_register_pid write_register_pid): Make
global. Needed for hppa-tdep.c.
* (supply_register): Don't set pid to inferior_pid when supplying
registers.
* hppa-tdep.c (saved_pc_after_call): frame_saved_pc ->
FRAME_SAVED_PC.
* (frame_saved_pc): Change name to hppa_frame_saved_pc.
* (hppa_pop_frame): Don't use a pid of 0 with target_write_pc.
Use write_pc instead, which uses the correct pid.
* (target_read_pc target_write_pc): Use read/write_register_pid
instead of read/write_register to preserve the pid passed in.
* inftarg.c (child_can_run): Add flag child_suppress_run to allow
hpux-threads.c to override this as a runnable target.
* config/pa/nm-hppah.h: Define target_new_objfile and
target_pid_to_str.
* config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc
instead of frame_saved_pc.
* config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb.
* config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since
we can't easily determine the start file bounds with ELF.
* config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb.
* hpux-thread.c: New file for HPUX/OSF thread support.
* osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h
RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h
cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h
cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h
cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF
thread support.
grow up correctly.
* config/pa/tm-hppa.h (USE_STRUCT_CONVENTION): Define.
(STACK_ALIGN): Define.
* hppa-tdep.c (hppa_alignof): Don't demand a minumim two byte
alignment on structs/unions.
Fixing assorted structure passing/return problems reported by the net.
Thu Jul 25 19:41:31 1996 Fred Fish <fnf@cygnus.com>
for details about these changes. I was going to include the complete
entry in the checkin message but it was apparently so large it caused
cvs to dump core.
and MMALLOC_CHECK macros, and add comment indicating how host dependent
makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
to use it but to not do heap corruption checking.
* gdbserver/Makefile.in: Ditto.
* utils.c (init_malloc): Replace warning() use with direct call of
fprintf_unfiltered, since current_target has not yet been set and thus
we cannot use warning(). If we try to use mmcheck and it fails,
suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
defined. Other small mmalloc related cleanups.
* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
Remove obsolete defines.
* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
* config/rs6000/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix.mh (MMALLOC_DISABLE):
* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
* config/mips/mipsm3.mh (MMALLOC_DISABLE):
* config/mips/decstation.mh (MMALLOC_DISABLE):
* config/m88k/cxux.mh (MMALLOC_DISABLE):
* config/i386/i386mk.mh (MMALLOC_DISABLE):
* config/i386/i386m3.mh (MMALLOC_DISABLE):
* config/i386/i386gnu.mh (MMALLOC_DISABLE):
Use MMALLOC_CFLAGS instead.
Also force HAVE_MMAP to be defined since autoconf is currently broken
for detecting a working mmap under hpux.
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS): Tweak MMAP_BASE_ADDRESS
to a better value suggested by Jeffrey A Law (law@cygnus.com).
S-record download code into srec.c.
* srec.c srec.h: New files. Contain S-record loading routines
formerly in monitor.c.
* serial.c serial.h: New routine just like fprintf, but uses
serial_t instead of FILE *.
* sh-tdep.c (frame_find_saved_regs init_extra_frame_info):
Don't add four to saved pc (makes things match manual). Also, fix
bug where we didn't get pc from stack frame correctly.
* config/sh/tm-sh.h (SAVED_PC_AFTER_CALL): Don't add four to
saved pc. Real hardware does this for you.
* sh3-rom.c (sh3_load): New routine. Sets up for download then
calls generic S-record loader.
* config/h8300/h8300.mt, config/h8500/h8500.mt,
config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt:
Add srec.o to TDEPFILES.
* config/pa/hppahpux.mh: Remove hardcoding of X locations.
* Makefile.in: Use X11_CFLAGS, X11_LDFLAGS and X11_LIBS.
* configure.in: Link X statically on Solaris, SunOS and HPUX.
problems than it fixes.
* hppa-tdep.c (skip_prologue): If we exit the main loop without
finding all the register saves, retry again without looking for
the registers we could not find the first time.
Better fix for 7768.
