238 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Joel Brobecker
|
1ca8fce046 |
Unused function in procfs.c on alpha-tru64.
The procfs_address_to_host_pointer function was not used outside of
alpha-tru64, and thus was triggering a compiler warning. Adjusted
accordingly.
gdb/ChangeLog:
* procfs.c (procfs_address_to_host_pointer): Only define when used.
|
||
|
Joel Brobecker
|
e9ef4f394d |
procfs.c: iterate_over_mappings callback has wrong profile.
The function proc_find_memory_regions calls iterate_over_mappings as
follow:
> return iterate_over_mappings (pi, func, data,
> find_memory_regions_callback);
The problem is that both func and find_memory_regions_callback
do not match the profile expected by iterate_over_mappings:
> iterate_over_mappings (procinfo *pi, int (*child_func) (), void *data,
> int (*func) (struct prmap *map,
> int (*child_func) (),
> void *data))
We cannot change proc_find_memory_regions such that FUNC is a pointer
to a function that takes no argument (in place of the 6 that it has).
This is because proc_find_memory_regions is used as a target_ops method.
However, it turns out that changing iterate_over_mappings to conform
to the profile imposed by the target_ops vector is possible without
much effort.
gdb/ChangeLog:
* procfs.c (iterate_over_mappings_cb_ftype): New typedef.
(iterate_over_mappings): Adjust function profile. Add declaration.
(insert_dbx_link_bpt_in_region, info_mappings_callback):
Adjust accordingly.
|
||
|
Joel Brobecker
|
e294797a88 |
procfs.c: Move solib_mappings_callback up to avoid compiler warning.
There are currently 2 issues with the placement of this routine:
- It's defined after it is being used (causing an implicit declaration);
- It looks like it's being defined all the time, whereas it is used
only on mips-irix (AFAICT) - shouldn't have this triggered a warning
on sparc-solaris, for instance???
In any case, this patch moves this function up, inside the right region,
just before the function where it is actually used.
gdb/ChangeLog:
* procfs.c (solib_mappings_callback): Move function up to avoid
a compiler warning.
|
||
|
Joel Brobecker
|
a223f1e7a0 |
procfs.c: Move find_signalled_thread and find_stop_signal.
These two functions are only used from procfs_make_note_section, which
itself is only defined if:
#if defined (UNIXWARE) || defined (PIOCOPENLWP) || defined (PCAGENT)
So these two functions are unused on mips-irix, and they get flagged
by -Wunused-function. This patch simply moves these functions closer
to the function that uses them, which also has the effect of putting
them inside the same #if block as procfs_make_note_section. Thus
they are defined only when used.
gdb/ChangeLog:
* procfs.c (find_signalled_thread, find_stop_signal): Move
these functions down to define them only when used.
|
||
Jan Kratochvil
|
74164c5624 |
gdb/
* defs.h (parse_pid_to_attach): New. * utils.c (parse_pid_to_attach): New. * darwin-nat.c (darwin_attach): Replace ARGS parsing by parse_pid. * gnu-nat.c (gnu_attach): Likewise. * nto-procfs.c (procfs_attach): Likewise. * procfs.c (procfs_attach): Likewise. * windows-nat.c (windows_attach): Likewise. * inf-ptrace.c (inf_ptrace_attach): Likewise. Remove variable dummy. * inf-ttrace.c (inf_ttrace_attach): Likewise. * remote.c (extended_remote_attach_1): Likewise. New comment on getpid check. gdb/testsuite/ * gdb.base/attach.exp (attach to nonsense is prohibited): Make the "Illegal process-id" expect string more exact. (attach to digits-starting nonsense is prohibited): New. |
||
|
Joel Brobecker
|
7434dadd5d |
Another -Wunused-function error in procfs.c (sparc-solaris)
* procfs.c (insert_dbx_link_breakpoint): Delete declaration. Move up.
Only define if SYS_syssgi is defined.
(remove_dbx_link_breakpoint): Delete declaration. Move up.
(dbx_link_addr, insert_dbx_link_bpt_in_file)
(insert_dbx_link_bpt_in_region): Move up. Only define if SYS_syssgi
is itself defined.
|
||
|
Jan Kratochvil
|
9f2982ff0b |
gdb/
Support Valgrind attachments broken by the PIE support. * auxv.c: Include gdbcore.h. (procfs_xfer_auxv): Make static. Reduce its comment. Drop its parameters ops, object and annex. Remove their assertions. (ld_so_xfer_auxv, memory_xfer_auxv): New function. * auxv.h (procfs_xfer_auxv): Remove comment. Rename to ... (memory_xfer_auxv): ... here. * linux-nat.c (linux_xfer_partial): Rename procfs_xfer_auxv to memory_xfer_auxv. * procfs.c (procfs_xfer_partial): Likewise. * solib-svr4.c (svr4_relocate_main_executable): New prototype. (svr4_special_symbol_handling): Call svr4_relocate_main_executable. (svr4_solib_create_inferior_hook): Conditionalize the svr4_relocate_main_executable call. gdb/testsuite/ * gdb.base/valgrind-db-attach.exp, gdb.base/valgrind-db-attach.c: New. |
||
|
Joel Brobecker
|
27087a3dc2 |
Breakpoint in shared library does not work on mips-irix.
* procfs.c: #include "observer.h".
(procfs_inferior_created): New function, moving here the code
which unsets the syssgi syscall-exit notifications.
(procfs_create_inferior): Remove the code which unsets the syssgi
syscall-exit notifications. It is too early to do this here.
(_initialize_procfs): Attach the procfs_inferior_created observer.
|
||
|
Joel Brobecker
|
3c95f01cee |
-Wunused warning in procfs.c (mips-irix only).
* procfs.c (gdb_praddset, gdb_prdelset): New macros. Use them
throughout instead of using praddset and prdelset respectively.
|
||
|
Joel Brobecker
|
4c49065043 | * procfs.c: (procfs_do_thread_registers) Use elfcore_write_lwpstatus. | ||
|
Joel Brobecker
|
4c38e0a4fc |
Update copyright year in most headers.
Automatic update by copyright.sh. |
||
Daniel Jacobowitz
|
751254059d |
2009-11-10 Daniel Gutson <dgutson@codesourcery.com>
* procfs.c (procfs_do_thread_registers): Added a call to fetch register values before saving them in the core file through the gcore command. (procfs_corefile_thread_callback): Removed the backup of inferior_ptid before calling procfs_do_thread_registers since the function already saves and restores it before returning. |
||
Pierre Muller
|
47607d6f7c |
* rs6000-nat.c (exec_one_dummy_insn): Add missing new ASPACE parameter
to depreacted_insert_raw_breakpoint function call. * procfs.c (insert_dbx_link_bpt_in_file): Likewise. |
||
Pedro Alves
|
6c95b8df7f |
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode". |
||
|
Pedro Alves
|
8903eff681 |
* procfs.c (procfs_make_note_section): Go back to only outputing
an NT_PSTATUS note when UNIXWARE is defined. |
||
|
Pedro Alves
|
651c8d2d6c |
* procfs.c (procfs_make_note_section): Always output a NT_PSTATUS
note when NEW_PROC_API is defined. |
||
Kazu Hirata
|
73930d4df0 |
* procfs.c (proc_set_current_signal): Populate mysinfo before
copying it to arg. (proc_clear_current_signal): Likewise. (proc_set_watchpoint): Populate pwatch before copying it to arg. |
||
Ulrich Weigand
|
e17a411335 |
* defs.h (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise. |
||
|
Ulrich Weigand
|
a6d9a66e23 |
* breakpoint.h (struct breakpoint): New member GDBARCH.
* breakpoint.c: Include "arch-utils.h".
(set_raw_breakpoint_without_location): Add GDBARCH parameter.
Use it to set breakpoint architecture.
(set_raw_breakpoint): Add GDBARCH parameter.
(create_internal_breakpoint): Likewise.
(create_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(create_breakpoint): Likewise.
(create_breakpoints): Likewise.
(break_command_really): Likewise.
(create_ada_exception_breakpoint): Likewise.
Update local callers to pass architecture:
(create_internal_breakpoint): Update.
(create_overlay_event_breakpoint): Update.
(create_longjmp_master_breakpoint): Update.
(create_thread_event_breakpoint): Update.
(create_solib_event_breakpoint): Update.
(create_catchpoint): Update.
(create_fork_vfork_event_catchpoint): Update.
(set_momentary_breakpoint): Update.
(clone_momentary_breakpoint): Update.
(create_breakpoint): Update.
(create_breakpoints): Update.
(break_command_really): Update.
(break_command_1): Update.
(set_breakpoint): Update.
(watch_command_1): Update.
(catch_fork_command_1): Update.
(catch_exec_commnd_1): Update.
(handle_gnu_v3_exceptions): Update.
(create_ada_exception_breakpoint): Update.
(catch_ada_exception_command): Update.
(catch_assert_command): Update.
(trace_command): Update.
* breakpoint.h (struct bp_location): New member GDBARCH.
* breakpoint.c (get_sal_arch): New function.
(set_raw_breakpoint): Set location architecture.
(add_location_to_breakpoint): Likewise.
(clone_momentary_breakpoint): Likewise.
(watch_command_1): Likewise.
(update_watchpoint): Likewise.
(bp_loc_is_permanent): Use location architecture instead of
current_gdbarch.
(adjust_breakpoint_address): Add GDBARCH parameter; use it
instead of current_gdbarch.
Update callers of adjust_breakpoint_address to pass
breakpoint location architecture:
(set_raw_breakpoint): Update.
(watch_command_1): Update.
* tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
of current_gdbarch.
(add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
(encode_actions): Pass tracepoint architecture to add_local_symbols
(encode_actions): Use tracepoint architecture instead of
current_gdbarch. Pass it to add_local_symbols and collect_symbol.
* breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
of print_one callback with last_loc.
* breakpoint.c (print_one_breakpoint_location): Replace last_addr
parameter with last_loc.
(print_one_breakpoint): Likewise.
(do_captured_breakpoint_query): Update call.
(breakpoint_1): Pass last_loc instead of last_addr to
print_one_breakpoint. Pass last location architecture instead of
current_gdbarch to set_next_address.
Update all implementations of the print_one callback:
* breakpoint.c (print_one_catch_fork): Update.
(print_one_catch_vfork): Update.
(print_one_catch_exec): Update.
(print_one_exception_catchpoint): Update.
* ada-lang.c (print_one_exception): Update.
(print_one_catch_exception): Update.
(print_one_catch_exception_unhandled): Update.
(print_one_catch_assert): Update.
* breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
(print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
to print_one_breakpoint_location.
(breakpoint_address_bits): New function.
(do_captured_breakpoint_query): Compute number of address bits to print
and pass it to print_one_breakpoint.
(breakpoint_1): Likewise. Use it instead of current_gdbarch.
* breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_thread_event_breakpoint): Likewise.
Update callers to create_thread_event_breakpoint:
* aix-thread.c (pd_enable): Update.
* linux-thread-db.c (enable_thread_event): Update.
* breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_solib_event_breakpoint): Likewise.
Update callers to create_solib_event_breakpoint:
* solib-frv.c (enable_break, enable_break2): Update.
* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
* solib-som.c (som_solib_create_inferior_hook): Update.
* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
* solib-svr4.c (enable_break): Update.
* breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
* breakpoint.c (insert_single_step_breakpoint): Likewise.
Update callers to insert_single_step_breakpoint:
* alpha-tdep.c (alpha_software_single_step): Update.
* arm-linux-tdep.c (arm_linux_software_single_step): Update.
* arm-tdep.c (arm_software_single_step): Update.
* cris-tdep.c (cris_software_single_step): Update.
* rs6000-aix-tdep.c (rs6000_software_single_step): Update.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
* sparc-tdep.c (sparc_software_single_step): Update.
* spu-tdep.c (spu_software_single_step): Update.
* mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
Pass it to insert_single_step_breakpoint.
(mips_software_single_step): Pass architecture to
deal_with_atomic_sequence and insert_single_step_breakpoint.
* breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
* breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
Update callers to deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint:
* breakpoint.c (single_step_gdbarch): New static variable.
(insert_single_step_breakpoint): Pass GDBARCH parameter to
deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
(remove_single_step_breakpoints): Pass architecture stored in
single_step_gdbarch to deprecated_remove_raw_breakpoint.
* rs6000-nat.c (exec_one_dummy_insn): Update.
* solib-irix.c (enable_break, disable_break): Update.
* procfs.c (procfs_mourn_inferior): Update.
(remove_dbx_link_breakpoint): Update.
* breakpoint.h (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
* breakpoint.c (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
Update callers to set_breakpoint, set_momentary_breakpoint and
set_momentary_breakpoint_at_pc:
* breakpoint.c (set_momentary_breakpoint_at_pc): Update.
(until_break_command): Update.
* infcall.c (call_function_by_hand): Update.
* infcmd.c (finish_backward, finish_forward): Update.
* infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
parameter. Pass it to set_momentary_breakpoint.
(insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
Pass it to set_momentary_breakpoint_at_pc.
(handle_inferior_event): Update.
(insert_step_resume_breakpoint_at_frame): Update.
(insert_step_resume_breakpoint_at_caller): Update..
* mi/mi-cmd-break.c: Include "arch-utils.h".
(mi_cmd_break_insert): Update.
* target.h (struct target_ops): Add GDBARCH parameter to
to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
and to_remove_hw_breakpoint members.
(target_insert_breakpoint, target_remove_breakpoint,
target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
parameter, pass to target routine.
(memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
parameter.
* target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
GDBARCH parameter, pass to target routine.
(update_current_target): Update function signature.
* breakpoint.c (insert_bp_location, remove_breakpoint,
deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
Pass architecture to target_ routines.
Update all implementations of the target breakpoint routines to take
GDBARCH parameter and use it instead of GDBARCH as appropriate:
* corelow.c (ignore): Update.
* exec.c (ignore): Update.
* mem-break.c (memory_insert_breakpoint): Update.
(memory_remove_breakpoint): Update.
* monitor.c (monitor_insert_breakpoint): Update.
(monitor_remove_breakpoint): Update.
* record.c (record_insert_breakpoint): Update.
(record_beneath_to_insert_breakpoint): Update.
(record_remove_breakpoint): Update.
(record_beneath_to_remove_breakpoint): Update.
* remote.c (remote_insert_breakpoint): Update.
(remote_remove_breakpoint): Update.
(remote_insert_hw_breakpoint): Update.
(remote_remove_hw_breakpoint): Update.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
(m32r_remove_breakpoint): Update.
* remote-mips.c (mips_insert_breakpoint): Update.
(mips_remove_breakpoint): Update.
* i386-nat.c (i386_insert_hw_breakpoint): Update.
(i386_remove_hw_breakpoint): Update.
* nto-procfs.c (procfs_insert_breakpoint): Update.
(procfs_remove_breakpoint): Update.
(procfs_insert_hw_breakpoint): Update.
(procfs_remove_hw_breakpoint): Update.
doc/ChangeLog:
* gdbint.texi (Examples of Use of @code{ui_out} functions):
Update example code extrated from breakpoint.c.
|
||
|
Ulrich Weigand
|
a97b0ac8cf |
* ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
of current_gdbarch. * aix-thread.c (pd_enable): Likewise. * amd64-linux-nat.c (ps_get_thread_area): Likewise. * bsd-uthread.c (bsd_uthread_activate): Likewise. * linux-nat.c (linux_nat_info_proc_cmd): Likewise. * linux-thread-db.c (enable_thread_event): Likewise. * monitor.c (monitor_write_memory, monitor_read_memory): Likewise. * nto-procfs.c (procfs_open): Likewise. * procfs.c (invalidate_cache, procfs_insert_watchpoint, info_proc_mappings, info_mappings_callback): Likewise. * record.c (record_open): Likewise. * rs6000-nat.c (ARCH64): Likewise. * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise. (darwin_bfd_open): Likewise. * memattr.c (mem_info_command): Likewise. * windows-nat.c (win32_resume): Use current regcache architecture instead of current_gdbarch. * dbug-rom.c (dbug_regname): Remove check against number of registers in current_gdbarch. * solib-pa64.c (read_dynamic_info): Remove unused variable. |
||
|
Pedro Alves
|
d1a7880c77 |
2009-06-07 Pedro Alves <pedro@codesourcery.com>
* procfs.h: New. * proc-utils.h (procfs_first_available): Don't declare here. * sol-thread.c: Include procfs.h instead of sys/procfs.h and proc-utils.h. * procfs.c: Include procfs.h. (procfs_target): Make it public. Don't register procfs_can_use_hw_breakpoint here. (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS. (procfs_can_use_hw_breakpoint): Remove check of TARGET_HAS_HARDWARE_WATCHPOINTS. (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint here. (_initialize_procfs): Don't add the procfs target here. * i386-sol2-nat.c: Include target.h and procfs.h. (_initialize_amd64_sol2_nat): Install the procfs target here, customized with watchpoints support. * irix5-nat.c: Include target.h. (_initialize_core_irix5): Rename to ... (_initialize_irix5_nat): ... this. Install the procfs target here, customized with watchpoints support. * alpha-nat.c: Include procfs.h. (_initialize_core_alpha): Rename to... (_initialize_alpha_nat): ... this. Install the procfs target here, customized with watchpoints support. * sparc-sol2-nat.c: Include target.h and procfs.h. (_initialize_sparc_sol2_nat): New. * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete. * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete. * config/mips/irix5.mh (NAT_FILE): Delete. * config/mips/irix6.mh (NAT_FILE): Delete. * config/mips/nm-irix5.h: Delete. 2009-06-07 Pedro Alves <pedro@codesourcery.com> * gdbint.texinfo (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete all references. |
||
|
Pedro Alves
|
09d3bde977 |
* inferior.h (proc_iterate_over_mappings): Delete declaration.
* nto-tdep.h (proc_iterate_over_mappings): Delete declaration. * procfs.c (proc_iterate_over_mappings): Delete. |
||
|
Pierre Muller
|
4fcbb49441 | * procfs.c (procfs_wait): Add options parameter. | ||
|
Pedro Alves
|
7e1789f556 |
* inflow.h (our_process_group): Remove declaration.
(inferior_process_group): Delete global variable declaration. (inferior_process_group): New function declaration. * inflow.c: Include observer.h. (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours): Delete. (struct terminal_info): New struct. (our_terminal_info): New global. (inferior_process_group): New function. (inferior_thisrun_terminal): Extend description comment. (gdb_has_a_terminal): Adjust to write to our_terminal_info fields instead of globals. (terminal_init_inferior_with_pgrp): Adjust to per-inferior terminal settings. (terminal_inferior): Ditto. (terminal_ours_1): Ditto. (inflow_new_inferior, inflow_inferior_exit): New functions. (child_terminal_info): Adjust to per-inferior terminal settings. (osig_set): New global. (set_sigint_trap): Adjust to per-inferior terminal settings. Set or clear `osig_set' accordingly. (clear_sigint_trap): Check `osig_set' to decide wheater to restore SIGINT handler, instead of checking the current inferior (which may be none). (_initialize_inflow): Attach inflow_new_inferior and inflow_inferior_exit to the "new_inferior" and "inferior_exit" notifications, respectively. * inferior.h (struct terminal_info): Forward declare. (struct inferior): Add `terminal_info' field. * inferior.c (delete_inferior_1): Notify the inferior_exit observers before removing the inferior from the lists and deleting it. * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now a function instead of a variable. Adjust. * procfs.c (procfs_stop): Ditto. |
||
|
Pierre Muller
|
d92524f1ee |
Unify target macros.
* target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ... (target_stoppped_by_watchpoint): New macro. (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ... (target_have_steppable_watchpoint): New macro. (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ... (target_have_continuable_watchpoint): New macro. (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ... (target_can_use_hardware_watchpoint): New macro. (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ... (target_region_ok_for_hw_watchpoint): New macro. * breakpoint.c (update_watchpoint): Use new macros. (bpstat_alloc): Likewise. (create_breakpoint): Likewise. (watch_command_1): Likewise. (can_use_hardware_watchpoint): Likewise. (do_enable_breakpoint): Likewise. * infrun.c (handle_inferior_event): Adapt to new macros. * mips-tdep.c (mips_gdbarch_init): Update comments. * procfs.c (procfs_set_watchpoint): Update comment. (procfs_insert_watchpoint): Adapt to new macros. * remote-m32r-sdi.c (m32r_stop): * remote-mips.c (mips_remove_breakpoint): * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros. (debug_to_stopped_by_watchpoint): Likewise. |
||
|
Pedro Alves
|
25513619db |
* procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
(procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New functions. (procfs_stopped_by_watchpoint): Made static, ptid argument removed. (_initialize_procfs): Register new watchpoint related target functions. * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT) (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT) (HAVE_CONTINUABLE_WATCHPOINT): Delete. (target_insert_watchpoint, target_remove_watchpoint): Delete. (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete declarations. * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT) (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete. (target_insert_watchpoint, target_remove_watchpoint): Delete. (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete declarations. * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT) (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete. (target_insert_watchpoint, target_remove_watchpoint): Delete. (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete declarations. |
||
|
Ulrich Weigand
|
fb14de7bbd |
* inferior.h (read_pc, write_pc): Remove.
* regcache.c (read_pc, write_pc): Remove. * infrun.c (displaced_step_fixup): Use regcache_read_pc instead of read_pc. (handle_inferior_event): Use regcache_read_pc instead of read_pc when determining value of stop_pc. Replace subsequent uses of read_pc by inspecting already-retrieved stop_pc value. (keep_going): Use regcache_read_pc instead of read_pc. * breakpoint.c (watchpoint_check): Use current frame architecture and PC instead of current_gdbarch and read_pc (). * tracepoint.c (set_traceframe_context): Replace PC argument with FRAME argument. (trace_start_command, finish_tfind_command): Update calls. (finish_tfind_command): Compare frame IDs to identify transitions between frames. (trace_find_pc_command): Use regcache_read_pc instead of read_pc. * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead of gdbarch. Use regcache_read_pc and regcache_write_pc instead of read_pc and write_pc. (store_register): Make regcache argument non-const. Update call to exec_one_dummy_insn. * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc. * infcmd.c (post_create_inferior): Likewise. * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise. * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise. * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise. * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise. * linux-fork.c (fork_load_infrun_state): Likewise. * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise. * record.c (record_wait): Likewise. * procfs.c (procfs_wait): Likewise. * remote-mips.c (common_open, mips_wait): Likewise. * remote-m32r-sdi.c (m32r_resume): Likewise. * symfile.c (generic_load): Use regcache_write_pc instead of write_pc. * monitor.c (monitor_create_inferior, monitor_load): Likewise. * m32r-rom.c (m32r_load, m32r_upload_command): Likewise. * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise. * remote-mips.c (mips_create_inferior, mips_load): Likewise. * solib-darwin.c: Include "regcache.h". * solib-pa64.c: Include "regcache.h". * solib-svr4.c: Include "regcache.h.". * symfile.c: Do not mention read_pc or write_pc in comments. * dink32-rom.c: Likewise. * m32r-rom.c: Likewise. * mips-tdep.c: Likewise. |
||
|
Joel Brobecker
|
bf75638ec1 |
Undo the following change. Not correct, after all:
* procfs.c (solib_mappings_callback, find_memory_regions_callback):
Fix a compilation warning on mips-irix due to casting from
a pointer of different size.
|
||
|
Joel Brobecker
|
37da21bceb |
* procfs.c (solib_mappings_callback, find_memory_regions_callback):
Fix a compilation warning on mips-irix due to casting from
a pointer of different size.
|
||
|
Joel Brobecker
|
7d85a9c0e3 |
Add a target_ops parameter to the to_kill method in struct target_ops.
* target.h (struct target_ops): Add a "target_ops *" parameter to
method to_kill.
(target_kill): Remove macro. Add declaration.
* target.c (debug_to_kill): Delete, no longer necessary.
(target_kill): New function.
(update_current_target): Stop inheriting the to_kill method.
Do not de_fault it to no_process either.
(setup_target_debug): Do not set current_target.to_kill.
* gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
accordingly.
|
||
|
Pedro Alves
|
28439f5ef7 |
* corelow.c (get_core_registers): Adjust.
(core_file_thread_alive): Rename to... (core_thread_alive): ... this. (core_pid_to_str): Try gdbarch_core_pid_to_str first. (init_core_ops): Adjust. (coreops_suppress_target): Delete. (_initialize_corelow): Unconditionally add core_ops. * procfs.c: Include "inf-child.h". (procfs_ops): Delete. (init_procfs_ops): Delete. Reimplement as... (procfs_target): ... this, inheriting from inf-child. (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust. (procfs_prepare_to_store): Delete. (procfs_store_registers, procfs_resume): Adjust. (procfs_open): Delete. (procfs_suppress_run): Delete. (procfs_can_run): Delete. (procfs_mourn_inferior): Adjust. (procfs_init_inferior): Add target_ops parameter. Adjust. (procfs_create_inferior): Don't pass procfs_init_inferior to fork_inferior. Instead call it after fork_inferior returns. (procfs_find_new_threads): Adjust. (_initialize_procfs): Adjust to use procfs_target instead of init_procfs_ops. * sol-thread.c (orig_core_ops, sol_core_ops): Delete. (lwp_to_thread): Use target_thread_alive. (sol_thread_open): Delete. (sol_thread_attach): Delete. (sol_thread_detach, sol_thread_resume, sol_thread_wait) (sol_thread_fetch_registers, sol_thread_store_registers): Adjust to use find_target_beneath. (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete. (sol_thread_xfer_partial): Adjust to use find_target_beneath. (sol_thread_files_info, sol_thread_kill_inferior): Delete. (check_for_thread_db): New. (sol_thread_notice_signals, sol_thread_create_inferior): Delete. (sol_thread_new_objfile): Call check_for_thread_db. (sol_thread_mourn_inferior): Adjust to use find_target_beneath. (sol_thread_can_run): Delete. (sol_thread_alive): Adjust to use find_target_beneath. (sol_thread_stop): Delete. (rw_common): Use target_write_memory or target_read_memory. (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers. (ps_lsetregs, ps_lsetfpregs): Use target_store_registers. (solaris_pid_to_str): Remove check for libthread_db initialization failing. (sol_find_new_threads): Remove check for libthread_db initialization failing, or for an invalid inferior_ptid. Adjust to use find_target_beneath. (sol_core_open, sol_core_close, sol_core_detach, sol_core_files_info, sol_find_memory_regions, sol_make_note_section, ignore): Delete. (init_sol_thread_ops): Make it a thread_stratum target. Remove unneeded callback settings. (init_sol_core_ops): Delete. (_initialize_sol_thread): No longer call init_sol_core_ops, set procfs_suppress_run, or hack with core_ops. * target.h (struct target_ops): Add a target_ops * parameter to to_resume, to_fetch_registers, to_store_registers, to_thread_alive and to_find_new_threads. (target_fetch_registers, target_store_registers) (target_thread_alive, target_find_new_threads): Redeclare as function. * target.c (update_current_target): Do not inherit or de_fault to_resume, to_fetch_registers, to_store_registers, to_thread_alive, to_find_new_threads. (target_resume): Adjust. (target_thread_alive, target_find_new_threads): New. (debug_to_resume, debug_to_fetch_registers): Delete. (target_fetch_registers): New. (debug_to_store_registers): Delete. (target_store_registers): New. (debug_to_thread_alive, debug_to_find_new_threads): Delete. (setup_target_debug): Adjust. * gdbcore.h (core_ops): Delete declaration. * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c, inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c, i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c, hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c, nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c, alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c, bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c, hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c, ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c, m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c, mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c, ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c, shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c, vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes. * gdbarch.sh (core_pid_to_str): New gdbarch callback. * gdbarch.h, gdbarch.c: Regenerate. * sol2-tdep.c: Include "inferior.h". (sol2_core_pid_to_str): New. * sol2-tdep.h (sol2_core_pid_to_str): Declare. * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it. * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it. * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it. * i386-sol2-tdep.c (i386_sol2_init_abi): Set it. |
||
|
Pedro Alves
|
117de6a924 |
* linux-nat.c (linux_nat_wait): Adjust.
(linux_nat_pid_to_str): Adjust. Remove call to thread_db_init. * linux-nat.h (thread_db_init): Delete declaration. * linux-thread-db.c (target_beneath): Delete. (thread_db_init): Delete. (thread_db_detach): Use find_target_beneath. (thread_db_wait): Adjust interface. Use find_target_beneath. (thread_db_mourn_inferior): Use find_target_beneath. (thread_db_can_async_p, thread_db_is_async_p, thread_db_async) (thread_db_async_mask): Delete. (thread_db_pid_to_str): Adjust interface. Use find_target_beneath. (thread_db_get_thread_local_address): Adjust interface. Use find_target_beneath. (init_thread_db_ops): Delete references to delete functions. * target.c (update_current_target): Don't inherit or default to_wait. Don't inherit to_pid_to_str and to_get_thread_local_address. (target_translate_tls_address): Look for a pushed target that implements to_get_thread_local_address, and use it instead of checking for target_get_thread_local_address_p. (target_wait, target_pid_to_str): Reimplement as functions. (dummy_pid_to_str): New. (init_dummy_target): Register it. (debug_to_wait): Delete. * target.h (struct target_ops): Make to_wait, to_pid_to_str and to_get_thread_local_address accept a pointer to struct target_ops. (target_wait): Delete macro, and declare as function. (target_pid_to_str): Likewise. (target_get_thread_local_address) (target_get_thread_local_address_p): Delete. (noprocess): Add NORETURN and ATTR_NORETURN tags. * inf-ptrace.c (inf_ptrace_wait): Adjust. (inf_ptrace_pid_to_str): New. (inf_ptrace_target): Use inf_ptrace_pid_to_str. * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust. * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust. * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str): Adjust. * corelow.c (core_pid_to_str): Adjust. * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust. * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust. * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust. * go32-nat.c (go32_wait, go32_pid_to_str): Adjust. * hpux-thread.c (hpux_thread_wait): Adjust. * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust. * monitor.c (monitor_wait, monitor_pid_to_str): Adjust. * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust. * procfs.c (procfs_pid_to_str): Adjust. * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust. * remote-mips.c (mips_wait): Adjust. * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust. * remote.c (remote_wait, remote_pid_to_str) (remote_get_thread_local_address): Adjust. * rs6000-nat.c (rs6000_wait): Adjust. * sol-thread.c (procfs_pid_to_str): Adjust declaration. (sol_thread_wait, solaris_pid_to_str): Adjust. * spu-linux-nat.c (spu_child_wait): Adjust. * windows-nat.c (windows_wait, windows_pid_to_str): Adjust. |
||
|
Kazu Hirata
|
f6a96b83ac |
* gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
unsigned long. |
||
|
Joel Brobecker
|
0fb0cc7590 | Updated copyright notices for most files. | ||
Vladimir Prus
|
136d6dae62 |
Kill pthread_ops_hack
* target.h (struct target_ops): Make to_attach, to_detach,
to_create_inferior and to_mourn_inferior accept a pointer
to struct target_ops.
(target_attach, target_create_inferior, target_create_inferior):
Convert from macros to function. Find the right target to
invoke a method of.
(find_default_attach, find_default_create_inferior): New parameter
ops.
* corefile.c (core_file_command): Pass target to to_detach.
* corelow.c (core_detach): Add 'ops' parameter.
* fork-child.c (fork_inferior): Return the pid. Allow
init_trace_fun to be NULL.
* inf-ptrace (ptrace_ops_hack): Remove.
(inf_ptrace_him): Remove, moving all logic into....
(inf_ptrace_create_inferior): ... here. Push the target
passed as parameter.
(inf_ptrace_mourn_inferior, inf_ptrace_attach, inf_ptrace_detach):
Push/pop target passed as parameter, no ptrace_ops_hack.
(inf_ptrace_target): Don't remember result.
* inferior.h (fork_inferior): Adjust prototype.
* linux-nat.c (linux_nat_create_inferior, linux_nat_attach)
(linux_nat_detach, linux_nat_mourn_inferior): New parameter ops.
Pass it to linux_ops target.
* linux-thread-db.c (thread_db_detach, thread_db_mourn_inferior):
New parameter ops. Pass it to the target beneath.
* remote.c (remote_mourn, extended_remote_mourn, remote_detach)
(extended_remote_create_inferior): New parameter ops. Pass it
further.
* target.c (debug_to_attach, debug_to_detach)
(debug_to_mourn_inferior): New parameter ops.
(target_create_inferior): New.
(update_current_target): Do not inherit to_attach, to_detach,
to_create_inferiour, to_mourn_inferior. Do not default
to_detach and to_mourn_inferior.
(target_detach): Find the right target to use.
(target_mourn_inferior): New.
(find_default_attach, find_default_create_inferior): New parameter
ops. Pass the found target when calling its method.
(init_dummy_target): Provide fallback definition of to_detach.
(target_attach): New.
(debug_to_attach, debug_to_detach, debug_to_create_inferior)
(debug_to_mourn_inferiour): New parameter ops.
* aix-thread.c: Adjust.
* bsd-uthread.c: Adjust.
* gnu-nat.c: Adjust.
* go32-nat.c: Adjust.
* hpux-thread.c: Adjust.
* inf-ttrace.c: Ajust.
* monitor.c: Adjust.
* nto-procfs.c: Adjust.
* procfs.c: Adjust.
* remote-m32r-sdi.c: Adjust.
* remote-mips.c: Adjust.
* remote-sim.c: Adjust.
* rs6000-nat.c: Adjust.
* sol-thread.c: Adjust.
* win32-nat.c: Adjust.
* dec-thread.c: Adjust.
|
||
|
Pedro Alves
|
0b62613e31 |
2008-10-09 Pedro Alves <pedro@codesourcery.com>
Make it compile without warnings. * procfs.c (create_procinfo): Initialize `parent'. (dead_procinfo): Pass a constant string as format to error. (procfs_address_to_host_pointer): Add cast to gdb_type *. (procfs_find_LDT_entry): Adjust format string to long int ptid.tid. (procfs_xfer_partial): Adjust prototype. Add gdb_byte* cast. (procfs_xfer_memory): Adjust prototype. (info_mappings_callback, info_proc_mappings): Adjust to not pass a variable as printf_filtered format. (procfs_make_note_section): Change type of auxv local to gdb_byte. * Makefile.in: Remove special rule. |
||
Paul Pluzhnikov
|
d1a4106143 |
2008-10-03 Paul Pluzhnikov <ppluzhnikov@google.com>
* utils.c, defs.h (gdb_buildargv): New fn. Wrap buildargv and check for out-of-memory condition. * exec.c (exec_file_command): Call it. * infrun.c (handle_command, xdb_handle_command): Likewise. * interps.c (interpreter_exec_cmd): Likewise. * linux-nat.c (linux_nat_info_proc_cmd): Likewise. * procfs.c (info_proc_cmd): Likewise. * remote-mips.c (common_open): Likewise. * remote-sim.c (gdbsim_kill, gdbsim_create_inferior) (gdbsim_open): Likewise. * remote.c (extended_remote_run, remote_put_command) (remote_get_command, remote_delete_command): Likewise. * ser-mingw.c (pipe_windows_open): Likesise. * source.c (add_path, show_substitute_path_command) (unset_substitute_path_command, set_substitute_path_command): Likewise. * stack.c (backtrace_command): Likewise. * symfile.c (symbol_file_command, generic_load) (add_symbol_file_command): Likesise. * symmisc.c (maintenance_print_symbols, maintenance_print_psymbols) (maintenance_print_msymbols): Likewise. |
||
|
Pedro Alves
|
181e7f9393 |
Remove the attach_flag global, and make it per-inferior.
* inferior.h (attach_flag): Delete. (inferior_process): Declare. * solib.c (update_solib_list): Adjust. * gnu-nat.c (gnu_create_inferior, gnu_attach): Adjust. * inf-ptrace.c (inf_ptrace_detach): Adjust. (inf_ptrace_files_info): Get it from the current inferior. * inf-ttrace.c (inf_ttrace_attach): Adjust. (inf_ttrace_files_info): Get it from the current inferior. * inflow.c (terminal_inferior, terminal_ours_1, set_sigint_trap) (clear_sigint_trap): Get it from the current process. * remote.c (extended_remote_attach_1) (extended_remote_create_inferior_1): Adjust. * top.c (quit_confirm, quit_target): Get it from the current inferior. * procfs.c (do_detach): Adjust. (procfs_wait): Get it from the event inferior. (procfs_files_info): Get it from the current inferior. * nto-procfs.c (procfs_files_info): Likewise. (procfs_attach): Adjust. Set the attach_flag here. (do_attach): Don't set it here. (procfs_detach): Don't clear it. (procfs_mourn_inferior): Don't clear it. * solib-osf.c (osf_solib_create_inferior_hook): Adjust. * target.c (attach_flag): Delete. (generic_mourn_inferior): Don't clear it. * win32-nat.c (get_win32_debug_event): Get it from the event process. (do_initial_win32_stuff): Add attaching argument. Set attach_flag in the inferior accordingly. (win32_attach): Don't set the attach_flag here. Pass 1 to do_intial_win32_stuff. (win32_files_info): Get it from the current inferior. (win32_create_inferior): Dont clear attach_flag here. Pass 0 to do_intial_win32_stuff. |
||
|
Pedro Alves
|
7f9f62ba18 |
* gnu-nat.c (gnu_attach): Add process to inferiors table.
(gnu_detach): Remove it. * go32-nat.c (go32_create_inferior): Add process to gdb's inferior table. * inf-ptrace.c (inf_ptrace_follow_fork): Delete and add inferiors to inferior table accordingly. (inf_ptrace_attach): Add new process to inferior table. (inf_ptrace_detach): Remove it. * inf-ttrace.c (inf_ttrace_follow_fork): Delete and add inferiors to inferior table accordingly. (inf_ttrace_attach): Add process to inferior table. (inf_ttrace_detach): Remove it. * linux-fork.c (init_fork_list): Delete any left over inferior. (linux_fork_mourn_inferior, detach_fork_command): Also delete processes from inferior list. * monitor.c (monitor_open): Add process to inferior list. (monitor_close): Remove it. * nto-procfs.c (procfs_attach): Add process to inferior list. Find threads after pushing the target. (procfs_detach): Remove process from inferior list. (procfs_create_inferior): Add process to inferior list. * procfs.c (procfs_detach): Remove process from inferior list. (do_attach): Add process to inferior list. * remote-sim.c (sim_create_inferior): Add process to inferior list. (gdbsim_close): Remove it. * target.c (generic_mourn_inferior): If inferior_ptid is not null_ptid, remove the corresponding inferior from inferior list. * win32-nat.c (do_initial_win32_stuff): Add process to inferior list. (win32_detach): Remove it. * linux-nat.c (linux_child_follow_fork): Delete and add inferiors to inferior list accordingly. * fork-child.c (fork_inferior): Add process to inferior list. * corelow.c (CORELOW_PID): Define. (core_close): Remove core from inferior list. (core_open): Add it. |
||
|
Ulrich Weigand
|
4e906f53ab |
* procfs.c (procfs_address_to_host_pointer): Use target_gdbarch
and its associated types to perform pointer conversion. (procfs_can_use_hw_breakpoint): Likewise. (procfs_auxv_parse): Remove unused variable. |
||
|
Pedro Alves
|
2020b7abd8 |
Remove the global stop_signal in favour of a per-thread
stop_signal. * inferior.h (stop_signal): Delete. * gdbthread.h (save_infrun_state, load_infrun_state): Remove stop_signal argument. * thread.c (load_infrun_state, save_infrun_state): Remove stop_signal argument. Don't reference it. * infcmd.c (stop_signal): Delete. (program_info): Adjust. * infrun.c (resume): Clear stop_signal. (proceed): Adjust. Pass the last stop_signal to the thread we're resuming. (context_switch): Don't context-switch stop_signal. (handle_inferior_event, keep_going): Adjust. (save_inferior_status, restore_inferior_status): Adjust. * fbsd-nat.c: Include "gdbthread.h". (find_signalled_thread, find_stop_signal): New. (fbsd_make_corefile_notes): Use it. * fork-child.c (startup_inferior): Adjust. * linux-nat.c (get_pending_status): Adjust. (linux_nat_do_thread_registers): Adjust. (find_signalled_thread, find_stop_signal): New. (linux_nat_do_thread_registers): Add stop_signal parameter. (struct linux_nat_corefile_thread_data): Add stop_signal member. (linux_nat_corefile_thread_callback): Pass stop_signal. (linux_nat_do_registers): Delete. (linux_nat_make_corefile_notes): Use find_stop_signal. Assume there's always a thread. * procfs.c (find_signalled_thread, find_stop_signal): New. (find_stop_signal): New. (procfs_do_thread_registers): Add stop_signal parameter. (struct procfs_corefile_thread_data): Add stop_signal member. (procfs_corefile_thread_callback): Pass args->stop_signal. (procfs_make_note_section): Find the last stop_signal. * solib-irix.c: Include gdbthread.h. (irix_solib_create_inferior_hook): Adjust. * solib-osf.c: Include gdbthread.h. (osf_solib_create_inferior_hook): Adjust. * solib-sunos.c: Include gdbthread.h. (sunos_solib_create_inferior_hook): Adjust. * solib-svr4.c: Include gdbthread.h. (svr4_solib_create_inferior_hook): Adjust. * win32-nat.c (do_initial_win32_stuff): Adjust. |
||
|
Pedro Alves
|
2689673f45 |
* procfs.c (to_attach): Create a procinfo for the current lwp.
Add it to gdb's thread list. (procfs_fetch_registers, procfs_store_registers): Assume there's always an lwp. (procfs_wait): Don't add the main thread here. (procfs_init_inferior): Create a procinfo for the main lwp here. Change main thread's ptid with thread_change_ptid. (procfs_notice_thread): Check for exited threads. (procfs_corefile_thread_callback): Remove check for the main process. (procfs_make_note_section): Assume there is always a thread. * sol-thread.c (sol_thread_attach): Clear sol_thread_active before attaching. Change the main thread ptid with thread_change_ptid. (sol_thread_detach): Clear sol_thread_active. (sol_thread_wait): Check for exited threads. (sol_thread_create_inferior): Clear sol_thread_active before creating a new inferior. Change the main thread ptid with thread_change_ptid. (sol_thread_mourn_inferior): Clear sol_thread_active. (sol_find_new_threads_callback): Check for exited threads. |
||
|
Pedro Alves
|
f9c72d524f |
Adjust all targets to new target_stop interface.
* gnu-nat.c (gnu_stop): Add ptid argument. * go32-nat.c (go32_stop): Add ptid argument. (go32_create_inferior): Pass inferior_ptid to go32_stop. * hpux-thread.c (hpux_thread_stop): Add ptid argument. * monitor.c (monitor_stop): Add ptid argument. (monitor_open): Pass inferior_ptid to monitor_stop. (monitor_interrupt): Pass inferior_ptid to target_stop. (monitor_stop): Add ptid argument. * nto-procfs.c (nto_interrupt): Pass inferior_ptid to target_stop. (procfs_create_inferior): Add ptid argument. * procfs.c (procfs_stop): Add ptid argument. * remote-m32r-sdi.c (m32r_stop): Add ptid argument. * remote-sim.c (gdbsim_stop): Add ptid argument. * sol-thread.c (sol_thread_stop): Add ptid argument. * win32-nat.c (win32_stop): Add ptid argument. |
||
|
Vladimir Prus
|
c47ffbe3b1 |
Fix auxv data parsing on 64-bit solaris
* target.h (struct target_ops): New field to_auxv_parse. * auxv.c (default_auxv_parse): New, renamed from previous target_auxv_parse. (target_auxv_parse): Try to call target method. Fallback to default_auxv_parse if not found. * procfs.c (procfs_auxv_parse): New. (init_procfs_ops): On Solaris, in 64-bit mode, install procfs_auxv_parse. |
||
|
Daniel Jacobowitz
|
17faa917e0 |
2008-03-21 Daniel Jacobowitz <dan@codesourcery.com>
* gdbthread.h (add_thread_with_info): New. * linux-thread-db.c: Add some documentation. (GET_LWP, GET_PID, GET_THREAD, is_lwp, is_thread, BUILD_LWP): Delete. (struct private_thread_info): Remove th_valid and ti_valid. Replace ti with tid. (thread_get_info_callback): Do not add TID to the new ptid. Do not cache th or ti. (thread_db_map_id2thr, lwp_from_thread): Delete functions. (thread_from_lwp): Assert that the LWP is set. Do not add TID to the new PTID. (attach_thread): Handle an already-existing thread. Use add_thread_with_info. Cache the th and tid. (detach_thread): Verify that private was set. Remove verbose argument and printing. Update caller. (thread_db_detach): Do not adjust inferior_ptid. (clear_lwpid_callback, thread_db_resume, thread_db_kill): Delete. (check_event, find_new_threads_callback): Do not add TID to the new PTID. (thread_db_wait): Do not use lwp_from_thread. (thread_db_pid_to_str): Use the cached TID. (thread_db_extra_thread_info): Check that private is set. (same_ptid_callback): Delete. (thread_db_get_thread_local_address): Do not use it or check is_thread. Check that private is set. Assume that the thread handle is already cached. (init_thread_db_ops): Remove to_resume and to_kill. * thread.c (add_thread_with_info): New. (add_thread): Use it. * linux-nat.c (find_thread_from_lwp): Delete. (exit_lwp): Do not use it. Check print_thread_events. Print before deleting the thread. (GET_PID, GET_LWP, BUILD_LWP, is_lwp): Move to... * linux-nat.h (GET_PID, GET_LWP, BUILD_LWP, is_lwp): ...here. * inf-ttrace.c (inf_ttrace_wait): Use print_thread_events and printf_unfiltered for thread exits. * procfs.c (procfs_wait): Likewise. 2008-03-21 Pedro Alves <pedro@codesourcery.com> * gdb.threads/fork-child-threads.exp: Test next over fork. |
||
|
Joel Brobecker
|
965b60eecb |
* sol-thread.c: Replace use of TM_I386SOL2_H by an expression
that is true only on x86-solaris and x86_64-solaris.
* procfs.c: Likewise. Move procfs_find_LDT_entry up together
with proc_get_LDT_entry.
|
||
Michael Snyder
|
244e85c8df |
2008-01-24 Michael Snyder <msnyder@specifix.com>
* procfs.c (procfs_xfer_partial): Comment, cut/paste error. * win32-nat.c (win32_xfer_partial): Ditto. * target.c (default_xfer_partial): Minor whitespace adjustment. |
||
|
Vladimir Prus
|
93815fbfa5 |
Inform about new thread in a single place.
* thread.c (add_thread_silent): Renamed
from add_thread.
(print_thread_events): New variable definition.
(show_print_thread_events): New function.
(_initialize_thread): Add "set print thread-events" and
"show print thread-events" commands.
(add_thread): Announce new thread.
* gdbthread.h (add_thread_silent): Declare.
(print_thread_events): New variable declaration.
* inf-ttrace.c (inf_ttrace_wait): Don't
inform about new thread, as add_thread is always
called too, and will take care of that.
* infrun.c (handle_inferior_event): Likewise.
* procfs.c (procfs_wait): Likewise.
* remote.c (remote_currthread): Likewise.
* sol-thread.c (sol_thread_wait): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
* linux-thread-db.c (attach_thread): Likewise.
Remove the verbose parameter.
(check_event): Make detach_thread be verbose
only if print_thread_events is set.
* linux-nat.c (lin_lwp_attach_lwp): Don't inform
about new thread. This is called only from
linux-thread-db.c:attach_thread, which will take care.
Remove the verbose parameter.
* linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
|
||
|
Daniel Jacobowitz
|
9b254dd1ce | Updated copyright notices for most files. | ||
Joseph Myers
|
c162e8c9a4 |
2007-12-16 Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com> * configure.ac: Check for *-*-solaris2.1[[0-9]]* instead of *-*-solaris2.1[[0-9]]. * configure: Regenerate. * procfs.c (proc_set_current_signal): If redelivering a signal, reuse the current siginfo if possible. testsuite: * gdb.base/siginfo-addr.exp, gdb.base/siginfo-addr.c: New. |