Building an x32 gdb trips on a static assertion:
In file included from .../src/gdb/common/common-defs.h:71:0,
from .../src/gdb/nat/amd64-linux-siginfo.c:21:
.../src/gdb/common/gdb_assert.h:26:66: error: size of array ‘never_defined_just_used_for_checking’ is negative
extern int never_defined_just_used_for_checking[(expr) ? 1 : -1]
^
.../src/gdb/nat/amd64-linux-siginfo.c:113:1: note: in expansion of macro ‘gdb_static_assert’
gdb_static_assert (sizeof (nat_siginfo_t) == sizeof (siginfo_t));
^
The problem is that the way nat_siginfo_t is defined, it can only
match the host's siginfo_t object when gdb is built as a 64-bit
program.
Several bits of nat_siginfo_t are off:
- nat_siginfo_t's _pad field's definition is:
int _pad[((128 / sizeof (int)) - 4)];
while /usr/include/bits/siginfo.h has:
# define __SI_MAX_SIZE 128
# if __WORDSIZE == 64
# define __SI_PAD_SIZE ((__SI_MAX_SIZE / sizeof (int)) - 4)
# else
# define __SI_PAD_SIZE ((__SI_MAX_SIZE / sizeof (int)) - 3)
# endif
and __WORDSIZE == 32 for x32. This is what causes the size of
nat_siginfo_t to be wrong and the assertion to fail.
- the nat_clock_t type is incorrect for 64-bit. We have this:
/* For native 64-bit, clock_t in _sigchld is 64bit aligned at 4 bytes. */
typedef long __attribute__ ((__aligned__ (4))) nat_clock_t;
however, /usr/include/bits/siginfo.h has:
# if defined __x86_64__ && __WORDSIZE == 32
/* si_utime and si_stime must be 4 byte aligned for x32 to match the
kernel. We align siginfo_t to 8 bytes so that si_utime and si_stime
are actually aligned to 8 bytes since their offsets are multiple of
8 bytes. */
typedef __clock_t __attribute__ ((__aligned__ (4))) __sigchld_clock_t;
# define __SI_ALIGNMENT __attribute__ ((__aligned__ (8)))
# else
typedef __clock_t __sigchld_clock_t;
# define __SI_ALIGNMENT
# endif
So we're currently forcing 4-byte alignment on clock_t, when it
should only be so for x32, not 64-bit.
The fix:
- Leaves nat_siginfo_t strictly for the 64-bit ABI.
- Adds a new typedef for the siginfo type that ptrace uses
(ptrace_siginfo_t). An x32 gdb always gets/sets an x32 siginfo_t
type with PTRACE_GETSIGINFO/PTRACE_SETSIGINFO.
- Uses this new ptrace_siginfo_t type instead of nat_siginfo_t as the
intermediate conversion type.
gdb/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (amd64_linux_siginfo_fixup): Rename 'native'
parameter to 'ptrace'.
* nat/amd64-linux-siginfo.c (GDB_SI_SIZE): New define.
(nat_uptr_t): New an unsigned long.
(nat_clock_t): Remove attribute __aligned__.
(struct nat_timeval): Delete.
(nat_siginfo_t): Remove attribute __aligned__.
(ptrace_siginfo_t): Define.
(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
(compat_x32_siginfo_from_siginfo)
(siginfo_from_compat_x32_siginfo): Make 'from' parameter const.
Convert through a ptrace_siginfo_t instead of a nat_siginfo_t.
Remove casts.
(amd64_linux_siginfo_fixup_common): Rename 'native' parameter to
'ptrace'. Remove static assertions.
(top level): New static assertions.
gdb/gdbserver/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (x86_siginfo_fixup): Rename 'native' parameter
to 'ptrace'.
have_ptrace_getregset is a tri-state variable (-1, 0, 1), and we have
some conditions like "if (have_ptrace_getregset)", which is not correct.
I'll explain why it is not correct in the following example. This fix
to this problem to replace the test (have_ptrace_getregset) to test
(have_ptrace_getregset == 1) or (have_ptrace_getregset == -1) etc.
However Doug thinks it hinders readability
https://sourceware.org/ml/gdb-patches/2015-05/msg00692.html so I decide
to add a new enum tribool and change have_ptrace_getregset to it, in
order to make these tests more readable.
have_ptrace_getregset is initialised to -1, and is adjusted to 0 or 1 in
$ARCH_linux_read_description according to the capability of the kernel.
However, it is possible that have_ptrace_getregset is used before it is
set to 0 or 1, which means it is still -1. This is shown below.
(gdb) run
Starting program: gdb/testsuite/gdb.base/break
Breakpoint 2, amd64_linux_fetch_inferior_registers (ops=0xceaa80, regcache=0xe72000, regnum=16) at git/gdb/amd64-linux-nat.c:128
128 {
top?p have_ptrace_getregset
$1 = TRIBOOL_UNKNOWN
top?c
Continuing.
Breakpoint 2, amd64_linux_fetch_inferior_registers (ops=0xceaa80, regcache=0xe72000, regnum=16) at git/gdb/amd64-linux-nat.c:128
128 {
top?c
Continuing.
Breakpoint 1, x86_linux_read_description (ops=0xceaa80) at git/gdb/x86-linux-nat.c:117
117 {
PTRACE_GETREGSET command is used even GDB doesn't know whether
PTRACE_GETREGSET is supported or not. It is wrong, but works on x86.
However it doesn't work on arm-linux if the kernel doesn't support
PTRACE_GETREGSET at all. We'll get:
(gdb) run
Starting program: gdb/testsuite/gdb.base/break
warning: Unable to fetch general register.
PC register is not available
gdb:
2015-06-23 Yao Qi <yao.qi@linaro.org>
* amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
(amd64_linux_store_inferior_registers): Likewise.
* arm-linux-nat.c (fetch_fpregister): Likewise.
(fetch_fpregs, store_fpregister): Likewise.
(store_fpregister, store_fpregs): Likewise.
(fetch_register, fetch_regs): Likewise.
(store_register, store_regs): Likewise.
(fetch_vfp_regs, store_vfp_regs): Likewise.
(arm_linux_read_description): Check have_ptrace_getregset is
TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE
or TRIBOOL_FALSE.
* i386-linux-nat.c (fetch_xstateregs): Check
have_ptrace_getregset is not TRIBOOL_TRUE.
(store_xstateregs): Likewise.
* linux-nat.c (have_ptrace_getregset): Change its type to
enum tribool.
* linux-nat.h (tribool): New enum.
* x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
Check whether have_ptrace_getregset is TRIBOOL_TRUE.
Macros PTRACE_GETREGSET and PTRACE_SETREGSET are defined locally in
some places in GDB and GDBserver. This patch is to move them to
nat/linux-ptrace.h to avoid duplication.
gdb:
2015-06-01 Yao Qi <yao.qi@linaro.org>
* amd64-linux-nat.c: Include "nat/linux-ptrace.h".
* i386-linux-nat.c: Likewise.
* nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
* s390-linux-nat.c: Include "nat/linux-ptrace.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
* x86-linux-nat.c: Include "nat/linux-ptrace.h".
* x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
gdb/gdbserver:
2015-06-01 Yao Qi <yao.qi@linaro.org>
* linux-s390-low.c (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
* linux-x86-low.c: Likewise.
This commit renames nine files that contain code used by both 32- and
64-bit Intel ports such that their names are prefixed with "x86"
rather than "i386". All types, functions and variables within these
files are likewise renamed such that their names are prefixed with
"x86" rather than "i386". This makes GDB follow the convention used
by gdbserver such that 32-bit Intel code lives in files called
"i386-*", 64-bit Intel code lives in files called "amd64-*", and code
for both 32- and 64-bit Intel lives in files called "x86-*".
This commit only renames OS-independent files. The Linux ports of
both GDB and gdbserver now follow the i386/amd64/x86 convention fully.
Some ports still use the old convention where "i386" in file/function/
type/variable names can mean "32-bit only" or "32- and 64-bit" but I
don't want to touch ports I can't fully test except where absolutely
necessary.
gdb/ChangeLog:
* i386-nat.h: Renamed as...
* x86-nat.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* i386-nat.c: Renamed as...
* x86-nat.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* common/i386-xstate.h: Renamed as...
* common/x86-xstate.h: New file. All type, function and variable
name prefixes changed from "i386_" to "x86_". All references
updated.
* nat/i386-cpuid.h: Renamed as...
* nat/x86-cpuid.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* nat/i386-gcc-cpuid.h: Renamed as...
* nat/x86-gcc-cpuid.h: New file. All type, function and variable
name prefixes changed from "i386_" to "x86_". All references
updated.
* nat/i386-dregs.h: Renamed as...
* nat/x86-dregs.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* nat/i386-dregs.c: Renamed as...
* nat/x86-dregs.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
gdb/gdbserver/ChangeLog:
* i386-low.h: Renamed as...
* x86-low.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* i386-low.c: Renamed as...
* x86-low.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
File x86-linux-nat.h is included twice in amd64-linux-nat.c and
i386-linux-nat.c. This patch is to remove one.
gdb:
2014-08-06 Yao Qi <yao@codesourcery.com>
* amd64-linux-nat.c: Remove duplicated include
"x86-linux-nat.h".
* i386-linux-nat.c: Likewise.
This commit merges the comments and whitespace in the common
parts of i386-linux-nat.c and amd64-linux-nat.c.
gdb/
2014-07-11 Gary Benson <gbenson@redhat.com>
* amd64-linux-nat.c: Comment and whitespace changes.
* i386-linux-nat.c: Comment and whitespace changes.
This commit adds two new helpers, x86_linux_create_target and
x86_linux_add_target, to hold the parts of _initialize_i386_linux_nat
and _initialize_amd64_linux_nat which are common.
gdb/
2014-07-11 Gary Benson <gbenson@redhat.com>
* amd64-linux-nat.c (x86_linux_create_target): New function.
(x86_linux_add_target): Likewise.
(_initialize_amd64_linux_nat): Delegate to the above new functions.
* i386-linux-nat.c (x86_linux_create_target): New function.
(x86_linux_add_target): Likewise.
(_initialize_i386_linux_nat): Delegate to the above new functions.
This commit adds a new helper, x86_linux_get_thread_area, to
hold the common parts of the ps_get_thread_area functions in
i386-linux-nat.c and amd64-linux-nat.c.
gdb/
2014-07-11 Gary Benson <gbenson@redhat.com>
* amd64-linux-nat.c (x86_linux_get_thread_area): New function.
(ps_get_thread_area): Delegate to the above in 32-bit mode.
* i386-linux-nat.c (x86_linux_get_thread_area): New function.
(ps_get_thread_area): Delegate to the above.
This commit merges i386_ and amd64_linux_read_description, renaming
both to x86_linux_read_description.
gdb/
2014-07-11 Gary Benson <gbenson@redhat.com>
* amd64-linux-nat.c (amd64_linux_read_description): Renamed to
x86_linux_read_description. All uses updated. amd64-specific
code conditionalized. Conditionalized i386-specific code added.
Redundant cast removed.
* i386-linux-nat.c (i386_linux_read_description): Renamed to
x86_linux_read_description. All uses updated. i386-specific
code conditionalized. Conditionalized amd64-specific code added.
One sizeof replaced with the actual type it is describing.
amd64-linux-nat.c and i386-linux-nat.c contain a number of functions
which are identical but for prefix on their names. This commit
renames all such functions to have the prefix x86_ instead of the
prefixes amd64_ or i386_ and updates all uses of those functions.
The now-identical x86_ functions will be pulled out to a separate
shared file in a later commit.
gdb/
2014-07-11 Gary Benson <gbenson@redhat.com>
* amd64-linux-nat.c (amd64_linux_dr_get): Renamed to
x86_linux_dr_get. All uses updated.
(amd64_linux_dr_set): Renamed to
x86_linux_dr_set. All uses updated.
(amd64_linux_dr_get_addr): Renamed to
x86_linux_dr_get_addr. All uses updated.
(amd64_linux_dr_get_control): Renamed to
x86_linux_dr_get_control. All uses updated.
(amd64_linux_dr_get_status): Renamed to
x86_linux_dr_get_status. All uses updated.
(amd64_linux_dr_set_control): Renamed to
x86_linux_dr_set_control. All uses updated.
(amd64_linux_dr_set_addr): Renamed to
x86_linux_dr_set_addr. All uses updated.
(amd64_linux_prepare_to_resume): Renamed to
x86_linux_prepare_to_resume. All uses updated.
(amd64_linux_new_thread): Renamed to
x86_linux_new_thread. All uses updated.
(amd64_linux_new_fork): Renamed to
x86_linux_new_fork. All uses updated.
(amd64_linux_child_post_startup_inferior): Renamed to
x86_linux_child_post_startup_inferior. All uses updated.
(amd64_linux_enable_btrace): Renamed to
x86_linux_enable_btrace. All uses updated.
(amd64_linux_disable_btrace): Renamed to
x86_linux_disable_btrace. All uses updated.
(amd64_linux_teardown_btrace): Renamed to
x86_linux_teardown_btrace. All uses updated.
(amd64_linux_read_btrace): Renamed to
x86_linux_read_btrace. All uses updated.
* i386-linux-nat.c (i386_linux_dr_get): Renamed to
x86_linux_dr_get. All uses updated.
(i386_linux_dr_set): Renamed to
x86_linux_dr_set. All uses updated.
(i386_linux_dr_get_addr): Renamed to
x86_linux_dr_get_addr. All uses updated.
(i386_linux_dr_get_control): Renamed to
x86_linux_dr_get_control. All uses updated.
(i386_linux_dr_get_status): Renamed to
x86_linux_dr_get_status. All uses updated.
(i386_linux_dr_set_control): Renamed to
x86_linux_dr_set_control. All uses updated.
(i386_linux_dr_set_addr): Renamed to
x86_linux_dr_set_addr. All uses updated.
(i386_linux_prepare_to_resume): Renamed to
x86_linux_prepare_to_resume. All uses updated.
(i386_linux_new_thread): Renamed to
x86_linux_new_thread. All uses updated.
(i386_linux_new_fork): Renamed to
x86_linux_new_fork. All uses updated.
(i386_linux_child_post_startup_inferior): Renamed to
x86_linux_child_post_startup_inferior. All uses updated.
(i386_linux_enable_btrace): Renamed to
x86_linux_enable_btrace. All uses updated.
(i386_linux_disable_btrace): Renamed to
x86_linux_disable_btrace. All uses updated.
(i386_linux_teardown_btrace): Renamed to
x86_linux_teardown_btrace. All uses updated.
(i386_linux_read_btrace): Renamed to
x86_linux_read_btrace. All uses updated.
This patch fixes this on x86 Linux:
(gdb) watch *buf@2
Hardware watchpoint 8: *buf@2
(gdb) si
0x00000000004005a7 34 for (i = 0; i < 100000; i++); /* stepi line */
(gdb) del
Delete all breakpoints? (y or n) y
(gdb) watch *(buf+1)@1
Hardware watchpoint 9: *(buf+1)@1
(gdb) si
0x00000000004005a7 in main () at ../../../src/gdb/testsuite/gdb.base/watchpoint-reuse-slot.c:34
34 for (i = 0; i < 100000; i++); /* stepi line */
Couldn't write debug register: Invalid argument.
(gdb)
In the example above the debug registers are being switched from this
state:
CONTROL (DR7): 0000000000050101 STATUS (DR6): 0000000000000000
DR0: addr=0x0000000000601040, ref.count=1 DR1: addr=0x0000000000000000, ref.count=0
DR2: addr=0x0000000000000000, ref.count=0 DR3: addr=0x0000000000000000, ref.count=0
to this:
CONTROL (DR7): 0000000000010101 STATUS (DR6): 0000000000000000
DR0: addr=0x0000000000601041, ref.count=1 DR1: addr=0x0000000000000000, ref.count=0
DR2: addr=0x0000000000000000, ref.count=0 DR3: addr=0x0000000000000000, ref.count=0
That is, before, DR7 was setup for watching a 2 byte region starting
at what's in DR0 (0x601040).
And after, DR7 is setup for watching a 1 byte region starting at
what's in DR0 (0x601041).
We always write DR0..DR3 before DR7, because if we enable a slot's
bits in DR7, you need to have already written the corresponding
DR0..DR3 registers -- the kernel rejects the DR7 write with EINVAL
otherwise.
The error shown above is the opposite scenario. When we try to write
0x601041 to DR0, DR7's bits still indicate intent of watching a 2-byte
region. That DR0/DR7 combination is invalid, because 0x601041 is
unaligned. To watch two bytes, we'd have to use two slots. So the
kernel errors out with EINVAL.
Fix this by always first clearing DR7, then writing DR0..DR3, and then
setting DR7's bits.
A little optimization -- if we're disabling the last watchpoint, then
we can clear DR7 just once. The changes to nat/i386-dregs.c make that
easier to detect, and as bonus, they make it a little easier to make
sense of DR7 in the debug logs, as we no longer need to remember we're
seeing stale bits.
Tested on x86_64 Fedora 20, native and GDBserver.
This adds an exhaustive test that switches between many different
combinations of watchpoint types and addresses and widths.
gdb/
2014-06-23 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (amd64_linux_prepare_to_resume): Clear
DR_CONTROL before setting DR0..DR3.
* i386-linux-nat.c (i386_linux_prepare_to_resume): Likewise.
* nat/i386-dregs.c (i386_remove_aligned_watchpoint): Clear all
bits of DR_CONTROL related to the debug register slot being
disabled. If all slots are vacant, clear local slowdown as well,
and assert DR_CONTROL is 0.
gdb/gdbserver/
2014-06-23 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (x86_linux_prepare_to_resume): Clear DR_CONTROL
before setting DR0..DR3.
gdb/testsuite/
2014-06-23 Pedro Alves <palves@redhat.com>
* gdb.base/watchpoint-reuse-slot.c: New file.
* gdb.base/watchpoint-reuse-slot.exp: New file.
This patch adds support for the Intel(R) Advanced Vector
Extensions 512 (Intel(R) AVX-512) registers. Native and remote
debugging are covered by this patch.
Intel(R) AVX-512 is an extension to AVX to support 512-bit wide
SIMD registers in 64-bit mode (XMM0-XMM31, YMM0-YMM31, ZMM0-ZMM31).
The number of available registers in 32-bit mode is still 8
(XMM0-7, YMM0-7, ZMM0-7). The lower 256-bits of the ZMM registers
are aliased to the respective 256-bit YMM registers. The lower
128-bits are aliased to the respective 128-bit XMM registers.
There are also 8 new, dedicated mask registers (K0-K7) in both 32-bit
mode and 64-bit mode.
For more information please see
Intel(R) Developer Zone: Intel(R) AVX
http://software.intel.com/en-us/intel-isa-extensions#pid-16007-1495
Intel(R) Architecture Instruction Set Extensions Programming Reference:
http://software.intel.com/en-us/file/319433-017pdf
2014-04-24 Michael Sturm <michael.sturm@mintel.com>
Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add
AVX512 registers.
(amd64_linux_read_description): Add code to handle AVX512 xstate
mask and return respective tdesc.
* amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c
and features/i386/x32-avx512-linux.c.
(amd64_linux_gregset_reg_offset): Add AVX512 registers.
(amd64_linux_core_read_description): Add code to handle AVX512
xstate mask and return respective tdesc.
(_initialize_amd64_linux_tdep): Initialize AVX512 tdesc.
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum
calculation.
(AMD64_LINUX_NUM_REGS): Adjust to new number of registers.
(tdesc_amd64_avx512_linux): New prototype.
(tdesc_x32_avx512_linux): Likewise.
* amd64-tdep.c: Include features/i386/amd64-avx512.c and
features/i386/x32-avx512.c.
(amd64_ymm_avx512_names): New register names for pseudo
registers YMM16-31.
(amd64_ymmh_avx512_names): New register names for raw registers
YMMH16-31.
(amd64_k_names): New register names for K registers.
(amd64_zmmh_names): New register names for ZMM raw registers.
(amd64_zmm_names): New registers names for ZMM pseudo registers.
(amd64_xmm_avx512_names): New register names for XMM16-31
registers.
(amd64_pseudo_register_name): Add code to return AVX512 pseudo
registers.
(amd64_init_abi): Add code to intitialize AVX512 tdep variables
if feature is present.
(_initialize_amd64_tdep): Call AVX512 tdesc initializers.
* amd64-tdep.h (enum amd64_regnum): Add AVX512 registers.
(AMD64_NUM_REGS): Adjust to new number of registers.
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of
registers supplied via XSTATE by AVX512 registers.
(i386_linux_read_description): Add case for AVX512.
* i386-linux-tdep.c: Include i386-avx512-linux.c.
(i386_linux_gregset_reg_offset): Add AVX512 registers.
(i386_linux_core_read_description): Add case for AVX512.
(i386_linux_init_abi): Install supported register note section
for AVX512.
(_initialize_i386_linux_tdep): Add call to tdesc init function for
AVX512.
* i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of
registers to be number of zmm7h + 1.
(tdesc_i386_avx512_linux): Add tdesc for AVX512 registers.
* i386-tdep.c: Include features/i386/i386-avx512.c.
(i386_zmm_names): Add ZMM pseudo register names array.
(i386_zmmh_names): Add ZMM raw register names array.
(i386_k_names): Add K raw register names array.
(num_lower_zmm_regs): Add constant for the number of lower ZMM
registers. AVX512 has 16 more ZMM registers than there are YMM
registers.
(i386_zmmh_regnum_p): Add function to look up register number of
ZMM raw registers.
(i386_zmm_regnum_p): Likewise for ZMM pseudo registers.
(i386_k_regnum_p): Likewise for K raw registers.
(i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw
registers added by AVX512.
(i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo
registers added by AVX512.
(i386_xmm_avx512_regnum_p): Likewise for additional XMM registers
added by AVX512.
(i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31.
(i386_pseudo_register_name): Add ZMM pseudo registers.
(i386_zmm_type): Construct and return vector registers type for ZMM
registers.
(i386_pseudo_register_type): Return appropriate type for YMM16-31,
ZMM0-31 pseudo registers and K registers.
(i386_pseudo_register_read_into_value): Add code to read K, ZMM
and YMM16-31 registers from register cache.
(i386_pseudo_register_write): Add code to write K, ZMM and
YMM16-31 registers.
(i386_register_reggroup_p): Add code to include/exclude AVX512
registers in/from respective register groups.
(i386_validate_tdesc_p): Handle AVX512 feature, add AVX512
registers if feature is present in xcr0.
(i386_gdbarch_init): Add code to initialize AVX512 feature
variables in tdep structure, wire in pseudo registers and call
initialize_tdesc_i386_avx512.
* i386-tdep.h (struct gdbarch_tdep): Add AVX512 related
variables.
(i386_regnum): Add AVX512 registers.
(I386_SSE_NUM_REGS): New define for number of SSE registers.
(I386_AVX_NUM_REGS): Likewise for AVX registers.
(I386_AVX512_NUM_REGS): Likewise for AVX512 registers.
(I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are
512 bits wide.
(i386_xmm_avx512_regnum_p): New prototype for register look up.
(i386_ymm_avx512_regnum_p): Likewise.
(i386_k_regnum_p): Likewise.
(i386_zmm_regnum_p): Likewise.
(i386_zmmh_regnum_p): Likewise.
* i387-tdep.c : Update year in copyright notice.
(xsave_ymm_avx512_offset): New table for YMM16-31 offsets in
XSAVE buffer.
(XSAVE_YMM_AVX512_ADDR): New macro.
(xsave_xmm_avx512_offset): New table for XMM16-31 offsets in
XSAVE buffer.
(XSAVE_XMM_AVX512_ADDR): New macro.
(xsave_avx512_k_offset): New table for K register offsets in
XSAVE buffer.
(XSAVE_AVX512_K_ADDR): New macro.
(xsave_avx512_zmm_h_offset): New table for ZMM register offsets
in XSAVE buffer.
(XSAVE_AVX512_ZMM_H_ADDR): New macro.
(i387_supply_xsave): Add code to supply AVX512 registers to XSAVE
buffer.
(i387_collect_xsave): Add code to collect AVX512 registers from
XSAVE buffer.
* i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number
of XMM16-31 registers.
(I387_NUM_K_REGS): New define for number of K registers.
(I387_K0_REGNUM): New define for K0 register number.
(I387_NUM_ZMMH_REGS): New define for number of ZMMH registers.
(I387_ZMM0H_REGNUM): New define for ZMM0H register number.
(I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31
registers.
(I387_YMM16H_REGNUM): New define for YMM16H register number.
(I387_XMM16_REGNUM): New define for XMM16 register number.
(I387_YMM0_REGNUM): New define for YMM0 register number.
(I387_KEND_REGNUM): New define for last K register number.
(I387_ZMMENDH_REGNUM): New define for last ZMMH register number.
(I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register
number.
(I387_XMM_AVX512_END_REGNUM): New define for XMM31 register
number.
* common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE
size.
* features/Makefile: Add AVX512 related files.
* features/i386/32bit-avx512.xml: New file.
* features/i386/64bit-avx512.xml: Likewise.
* features/i386/amd64-avx512-linux.c: Likewise.
* features/i386/amd64-avx512-linux.xml: Likewise.
* features/i386/amd64-avx512.c: Likewise.
* features/i386/amd64-avx512.xml: Likewise.
* features/i386/i386-avx512-linux.c: Likewise.
* features/i386/i386-avx512-linux.xml: Likewise.
* features/i386/i386-avx512.c: Likewise.
* features/i386/i386-avx512.xml: Likewise.
* features/i386/x32-avx512-linux.c: Likewise.
* features/i386/x32-avx512-linux.xml: Likewise.
* features/i386/x32-avx512.c: Likewise.
* features/i386/x32-avx512.xml: Likewise.
* regformats/i386/amd64-avx512-linux.dat: New file.
* regformats/i386/amd64-avx512.dat: Likewise.
* regformats/i386/i386-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx512.dat: Likewise.
* regformats/i386/x32-avx512-linux.dat: Likewise.
* regformats/i386/x32-avx512.dat: Likewise.
* NEWS: Add note about new support for AVX512.
testsuite/
* Makefile.in (EXECUTABLES): Added i386-avx512.
* gdb.arch/i386-avx512.c: New file.
* gdb.arch/i386-avx512.exp: Likewise.
gdbserver/
* Makefile.in: Added rules to handle new files
i386-avx512.c i386-avx512-linux.c amd64-avx512.c
amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c.
* configure.srv (srv_i386_regobj): Add i386-avx512.o.
(srv_i386_linux_regobj): Add i386-avx512-linux.o.
(srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o.
(srv_amd64_linux_regobj): Add amd64-avx512-linux.o and
x32-avx512-linux.o.
(srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml.
(srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and
i386/x32-avx512.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and
i386/x32-avx512-linux.xml.
* i387-fp.c (num_avx512_k_registers): New constant for number
of K registers.
(num_avx512_zmmh_low_registers): New constant for number of
lower ZMM registers (0-15).
(num_avx512_zmmh_high_registers): New constant for number of
higher ZMM registers (16-31).
(num_avx512_ymmh_registers): New contant for number of higher
YMM registers (ymm16-31 added by avx521 on x86_64).
(num_avx512_xmm_registers): New constant for number of higher
XMM registers (xmm16-31 added by AVX512 on x86_64).
(struct i387_xsave): Add space for AVX512 registers.
(i387_cache_to_xsave): Change raw buffer size to 64 characters.
Add code to handle AVX512 registers.
(i387_xsave_to_cache): Add code to handle AVX512 registers.
* linux-x86-low.c (init_registers_amd64_avx512_linux): New
prototypei from generated file.
(tdesc_amd64_avx512_linux): Likewise.
(init_registers_x32_avx512_linux): Likewise.
(tdesc_x32_avx512_linux): Likewise.
(init_registers_i386_avx512_linux): Likewise.
(tdesc_i386_avx512_linux): Likewise.
(x86_64_regmap): Add AVX512 registers.
(x86_linux_read_description): Add code to handle AVX512 XSTATE
mask.
(initialize_low_arch): Add code to initialize AVX512 registers.
doc/
* gdb.texinfo (i386 Features): Add description of AVX512
registers.
Change-Id: Ifc4c08c76b85dbec18d02efdbe6182e851584438
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
Read branch trace data incrementally and extend the current trace rather than
discarding it and reading the entire trace buffer each time.
If the branch trace buffer overflowed, we can't extend the current trace so we
discard it and start anew by reading the entire branch trace buffer.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
Support delta reads.
(linux_disable_btrace): Change return type.
* common/linux-btrace.h (linux_read_btrace): Change parameters
and return type to allow error reporting. Update users.
(linux_disable_btrace): Change return type. Update users.
* common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
New.
(btrace_error): New.
(btrace_block) <begin>: Comment on BEGIN == 0.
* btrace.c (btrace_compute_ftrace): Start from the end of
the current trace.
(btrace_stitch_trace, btrace_clear_history): New.
(btrace_fetch): Read delta trace, return if replaying.
(btrace_clear): Move clear history code to btrace_clear_history.
(parse_xml_btrace): Throw an error if parsing failed.
* target.h (struct target_ops) <to_read_btrace>: Change parameters
and return type to allow error reporting.
(target_read_btrace): Change parameters and return type to allow
error reporting.
* target.c (target_read_btrace): Update.
* remote.c (remote_read_btrace): Support delta reads. Pass
errors on.
* NEWS: Announce it.
gdbserver/
* target.h (target_ops) <read_btrace>: Change parameters and
return type to allow error reporting.
* server.c (handle_qxfer_btrace): Support delta reads. Pass
trace reading errors on.
* linux-low.c (linux_low_read_btrace): Pass trace reading
errors on.
(linux_low_disable_btrace): New.
2013-06-24 Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset):
Add MPX registers.
(amd64_linux_read_description): Add initialization for MPX and
AVX independently.
* amd64-linux-tdep.c: Includes features/i386/amd64-mpx-linux.c.
(amd64_linux_gregset_reg_offset): Add MPX registers.
(amd64_linux_core_read_description): Add initialization for MPX
registers.
(_initialize_amd64_linux_tdep): Initialize MPX targets.
* amd64-linux-tdep.h (AMD64_LINUX_RAX_REGNUM): Set it to the last
register on the list.
(tdesc_amd64_mpx_linux) Add new target for MPX.
* amd64-tdep.c: Includes features/i386/amd64-mpx.c.
(amd64_mpx_names): MPX register names.
(amd64_init_abi): Add MPX register while initializing the ABI.
(_initialize_amd64_tdep): Initialize MPX targets.
* amd64-tdep.h (amd64_regnum): Add MPX registers.
(AMD64_NUM_REGS): Set number of registers taking MPX into account.
Change-Id: I4a785c181e2fb45e4086650b2f87426caeb2f800
Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
Conflicts:
gdb/ChangeLog
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
While reviewing the native AArch64 patch, I noticed a problem:
On 02/06/2013 08:46 PM, Pedro Alves wrote:
>
>> > +static void
>> > +aarch64_linux_prepare_to_resume (struct lwp_info *lwp)
>> > +{
>> > + struct arch_lwp_info *info = lwp->arch_private;
>> > +
>> > + /* NULL means this is the main thread still going through the shell,
>> > + or, no watchpoint has been set yet. In that case, there's
>> > + nothing to do. */
>> > + if (info == NULL)
>> > + return;
>> > +
>> > + if (DR_HAS_CHANGED (info->dr_changed_bp)
>> > + || DR_HAS_CHANGED (info->dr_changed_wp))
>> > + {
>> > + int tid = GET_LWP (lwp->ptid);
>> > + struct aarch64_debug_reg_state *state = aarch64_get_debug_reg_state ();
> Hmm. This is always fetching the debug_reg_state of
> the current inferior, but may not be the inferior of lwp.
> I see the same bug on x86. Sorry about that. I'll fix it.
A natural fix would be to make xxx_get_debug_reg_state take an
inferior argument, but that doesn't work because of the case where we
detach breakpoints/watchpoints from the child fork, at a time there's
no inferior for the child fork at all. We do a nasty hack in
i386_inferior_data_get, but that relies on all callers pointing the
current inferior to the correct inferior, which isn't actually being
done by all callers, and I don't think we want to enforce that -- deep
in the bowls of linux-nat.c, there are many cases we resume lwps
behind the scenes, and it's be better to not have that code rely on
global state (as it doesn't today).
The fix is to decouple the watchpoints code from inferiors, making it
track target processes instead. This way, we can freely keep track of
the watchpoint mirrors for these processes behind the core's back.
Checkpoints also play dirty tricks with swapping the process behind
the inferior, so they get special treatment too in the patch (which
just amounts to calling a new hook). Instead of the old hack in
i386_inferior_data_get, where we returned a copy of the current
inferior's debug registers mirror, as soon as we detect a fork in the
target, we copy the debug register mirror from the parent to the child
process.
I don't have an old kernel handy to test, but I stepped through gdb doing
the watchpoint removal in the fork child in the watchpoint-fork test
seeing that the debug registers end up cleared in the child.
I didn't find the need for linux_nat_iterate_watchpoint_lwps. If
we use plain iterate_over_lwps instead, what happens is that
when removing watchpoints, that iterate_over_lwps doesn't actually
iterate over anything, since the fork child is not added to the
lwp list until later, at detach time, in linux_child_follow_fork.
And if we don't iterate over that lwp, we don't mark its debug
registers as needing update. But linux_child_follow_fork takes
care of doing that explicitly:
child_lp = add_lwp (inferior_ptid);
child_lp->stopped = 1;
child_lp->last_resume_kind = resume_stop;
make_cleanup (delete_lwp_cleanup, child_lp);
/* CHILD_LP has new PID, therefore linux_nat_new_thread is not called for it.
See i386_inferior_data_get for the Linux kernel specifics.
Ensure linux_nat_prepare_to_resume will reset the hardware debug
registers. It is done by the linux_nat_new_thread call, which is
being skipped in add_lwp above for the first lwp of a pid. */
gdb_assert (num_lwps (GET_PID (child_lp->ptid)) == 1);
if (linux_nat_new_thread != NULL)
linux_nat_new_thread (child_lp);
if (linux_nat_prepare_to_resume != NULL)
linux_nat_prepare_to_resume (child_lp);
ptrace (PTRACE_DETACH, child_pid, 0, 0);
so unless I'm missing something (quite possible) it ends up all
the same. But, the !detach-on-fork, and the "follow-fork child" paths
should also call linux_nat_new_thread, and they don't presently. It
seems to me in those cases we're not clearing debug regs correctly
when that's needed. Instead of copying that bit that works around
add_lwp bypassing the linux_nat_new_thread call, I thought it'd
be better to add an add_initial_lwp call to be used in the case we
really need to bypass linux_nat_new_thread, and make
add_lwp always call linux_nat_new_thread.
i386_cleanup_dregs is rewritten to forget about the current process
debug mirrors, which takes cares of other i386 ports. Only a couple
of extra tweaks here and there were needed, as some targets wheren't
actually calling i386_cleanup_dregs.
Tested on Fedora 17 x86_64 -m64/-m32.
GDBserver already fetches the i386_debug_reg_state from the right
process, and, it doesn't handle forks at all, so no fix is needed over
there.
gdb/
2013-02-13 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (update_debug_registers_callback):
Update comment.
(amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
iterate_over_lwps.
(amd64_linux_prepare_to_resume): Pass the lwp's pid to
i386_debug_reg_state.
(amd64_linux_new_fork): New function.
(_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
linux_nat_new_fork hook, and i386_forget_process as
linux_nat_forget_process hook.
* i386-linux-nat.c (update_debug_registers_callback):
Update comment.
(amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
iterate_over_lwps.
(i386_linux_prepare_to_resume): Pass the lwp's pid to
i386_debug_reg_state.
(i386_linux_new_fork): New function.
(_initialize_i386_linux_nat): Install i386_linux_new_fork as
linux_nat_new_fork hook, and i386_forget_process as
linux_nat_forget_process hook.
* i386-nat.c (i386_init_dregs): Delete.
(i386_inferior_data, struct i386_inferior_data):
Delete.
(struct i386_process_info): New.
(i386_process_list): New global.
(i386_find_process_pid, i386_add_process, i386_process_info_get):
New functions.
(i386_inferior_data_get): Delete.
(i386_process_info_get): New function.
(i386_debug_reg_state): New parameter 'pid'. Reimplement.
(i386_forget_process): New function.
(i386_cleanup_dregs): Rewrite.
(i386_update_inferior_debug_regs, i386_insert_watchpoint)
(i386_remove_watchpoint, i386_region_ok_for_watchpoint)
(i386_stopped_data_address, i386_insert_hw_breakpoint)
(i386_remove_hw_breakpoint): Adjust to pass the current process id
to i386_debug_reg_state.
(i386_use_watchpoints): Don't register inferior data.
* i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
adjust comment.
(i386_forget_process): Declare.
* linux-fork.c (delete_fork): Call linux_nat_forget_process.
* linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
New static globals.
(linux_child_follow_fork): Don't call linux_nat_new_thread here.
(add_initial_lwp): New, factored out from ...
(add_lwp): ... this. Don't check the number of lwps before
calling linux_nat_new_thread.
(linux_nat_iterate_watchpoint_lwps): Delete.
(linux_nat_attach): Use add_initial_lwp instead of add_lwp.
(linux_handle_extended_wait): Call the linux_nat_new_fork hook on
forks and vforks.
(linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
initial lwp.
(linux_nat_kill, linux_nat_mourn_inferior): Call
linux_nat_forget_process.
(linux_nat_set_new_fork, linux_nat_set_forget_process)
(linux_nat_forget_process): New functions.
* linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
type.
(linux_nat_iterate_watchpoint_lwps): Delete declaration.
(linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
types.
(linux_nat_set_new_fork, linux_nat_set_forget_process)
(linux_nat_forget_process): New declarations.
* amd64fbsd-nat.c (super_mourn_inferior): New global.
(amd64fbsd_mourn_inferior): New function.
(_initialize_amd64fbsd_nat): Override to_mourn_inferior.
* windows-nat.c (windows_detach): Call i386_cleanup_dregs.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* amd64-linux-nat.c: Include <sys/user.h>.
(ps_get_thread_area): Use PTRACE_PEEKUSER to get fs_base/gs_base
if HAVE_STRUCT_USER_REGS_STRUCT_FS_BASE or
HAVE_STRUCT_USER_REGS_STRUCT_GS_BASE is defined.
* configure.ac: Check if the fs_base and gs_base members of
`struct user_regs_struct' exist.
* config.in: Regenerated.
* configure: Likewise.
Fix watchpoints across inferior fork.
* amd64-linux-nat.c (update_debug_registers_callback): Update the
comment for linux_nat_iterate_watchpoint_lwps.
(amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
linux_nat_iterate_watchpoint_lwps.
(amd64_linux_prepare_to_resume): New comment on Linux kernel.
* i386-linux-nat.c (update_debug_registers_callback): Update the
comment for linux_nat_iterate_watchpoint_lwps.
(i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
linux_nat_iterate_watchpoint_lwps.
(i386_linux_prepare_to_resume): New comment on Linux kernel.
* i386-nat.c: Include inferior.h.
(dr_mirror): Remove.
(i386_inferior_data, struct i386_inferior_data)
(i386_inferior_data_get): New.
(i386_debug_reg_state): Use i386_inferior_data_get.
(i386_cleanup_dregs, i386_update_inferior_debug_regs)
(i386_insert_watchpoint, i386_remove_watchpoint)
(i386_stopped_data_address, i386_insert_hw_breakpoint)
(i386_remove_hw_breakpoint): New variable state, use
i386_debug_reg_state instead of DR_MIRROR.
* linux-nat.c (delete_lwp): New declaration.
(num_lwps): Move here from downwards.
(delete_lwp_cleanup): New.
(linux_child_follow_fork): Create new child_lp, call
linux_nat_new_thread and linux_nat_prepare_to_resume before calling
PTRACE_DETACH.
(num_lwps): Move upwards.
(linux_nat_iterate_watchpoint_lwps): New.
* linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): New.
(linux_nat_iterate_watchpoint_lwps_ftype): New declaration.
gdb/testsuite/
Fix watchpoints across inferior fork.
* gdb.threads/watchpoint-fork-child.c: New file.
* gdb.threads/watchpoint-fork-mt.c: New file.
* gdb.threads/watchpoint-fork-parent.c: New file.
* gdb.threads/watchpoint-fork-st.c: New file.
* gdb.threads/watchpoint-fork.exp: New file.
* gdb.threads/watchpoint-fork.h: New file.
* amd64-linux-nat.c (update_debug_registers_callback): New comment on
the return value.
* i386-linux-nat.c (update_debug_registers_callback): Likewise.
Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-nat.c (add_lwp): Don't call linux_nat_new_thread on the
first LWP.
* amd64-linux-nat.c (update_debug_registers_callback): Instantiate
`lwp->arch_private' if NULL.
(amd64_linux_prepare_to_resume): Do nothing if `lwp->arch_private'
is NULL.
* i386-linux-nat.c (update_debug_registers_callback): Instantiate
`lwp->arch_private' if NULL.
(i386_linux_prepare_to_resume): Do nothing if `lwp->arch_private'
is NULL.
* amd64-linux-nat.c (compat_siginfo_from_siginfo)
(siginfo_from_compat_siginfo): Also copy si_pid and si_uid when
si_code is < 0. Check for si_code == SI_TIMER before checking for
si_code < 0.
gdb/gdbserver/
* linux-x86-low.c (compat_siginfo_from_siginfo)
(siginfo_from_compat_siginfo): Also copy si_pid and si_uid when
si_code is < 0. Check for si_code == SI_TIMER before checking for
si_code < 0.
