Convert microMIPS branches and jumps whose delay slot would be filled by
a generated NOP instruction to the corresponding compact form where one
exists, in a manner similar to MIPS16 JR->JRC and JALR->JALRC swap.
Do so even where the transformation switches from a 16-bit to a 32-bit
branch encoding for no benefit in code size reduction, as this is still
advantageous. This is because a branch/NOP pair takes 2 pipeline slots
or a 2-cycle completion latency except in superscalar implementations.
Whereas a compact branch may or may not stall on its target fetch, so it
will at most have a 2-cycle completion latency and may have only 1 even
in scalar implementations, and in superscalar implementations it is
expected to have no worse latency as a branch/NOP pair has. Also it
won't stall and therefore take the extra latency cycle in the not-taken
case.
Technically this is the same as MIPS16 compaction: for the qualifying
instruction encodings the APPEND_ADD_COMPACT machine code generation
method is selected where APPEND_ADD_WITH_NOP otherwise would and tells
the code generator in `append_insn' to convert the regular form of an
instruction to its corresponding compact form. For this the opcode is
tweaked as necessary and the microMIPS opcode table is scanned for the
matching updated instruction. A non-$0 `rt' operand to BEQ and BNE
instructions is moved to the `rs' operand field of BEQZC and BNEZC
encodings as required.
Unlike with MIPS16 compaction however we need to handle out-of-distance
branch relaxation as well. We do this by deferring the generation of
any delay-slot NOP required to relaxation made in `md_convert_frag', by
converting the APPEND_ADD_WITH_NOP machine code generation to APPEND_ADD
where a relaxed instruction is recorded. Relaxation then, depending on
actual code produced, chooses between either using a compact branch or
jump encoding and emitting the NOP outstanding if no compact encoding is
possible.
For code simplicity's sake the relaxation pass is retained even if the
principle of preferring a compact encoding to a 16-bit branch/NOP pair
means, in the absence of out-of-range branch relaxation, that a single
compact branch machine code instruction will eventually be produced from
a given assembly source instruction.
gas/
* config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Add `nods' flag.
(RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16)
(RELAX_MICROMIPS_MARK_TOOFAR16, RELAX_MICROMIPS_CLEAR_TOOFAR16)
(RELAX_MICROMIPS_TOOFAR32, RELAX_MICROMIPS_MARK_TOOFAR32)
(RELAX_MICROMIPS_CLEAR_TOOFAR32): Shift bits.
(get_append_method): Also return APPEND_ADD_COMPACT for
microMIPS instructions.
(find_altered_mips16_opcode): Exclude macros from matching.
Factor code out...
(find_altered_opcode): ... to this new function.
(find_altered_micromips_opcode): New function.
(frag_branch_delay_slot_size): Likewise.
(append_insn): Handle microMIPS branch/jump compaction.
(macro_start): Likewise.
(relaxed_micromips_32bit_branch_length): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/micromips.s: Add conditional explicit NOPs
for delay slot filling.
* testsuite/gas/mips/micromips-b16.s: Add explicit NOPs for
delay slot filling.
* testsuite/gas/mips/micromips-size-1.s: Likewise.
* testsuite/gas/mips/micromips.l: Adjust line numbers.
* testsuite/gas/mips/micromips-warn.l: Likewise.
* testsuite/gas/mips/micromips-size-1.l: Likewise.
* testsuite/gas/mips/micromips.d: Adjust padding.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips-insn32.d: Likewise.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips@beq.d: Update patterns for
branch/jump compaction.
* testsuite/gas/mips/micromips@bge.d: Likewise.
* testsuite/gas/mips/micromips@bgeu.d: Likewise.
* testsuite/gas/mips/micromips@blt.d: Likewise.
* testsuite/gas/mips/micromips@bltu.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d:
Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d:
Likewise.
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
* testsuite/gas/mips/micromips@loc-swap-dis.d: Likewise.
* testsuite/gas/mips/micromips@relax.d: Likewise.
* testsuite/gas/mips/micromips@relax-at.d: Likewise.
* testsuite/gas/mips/micromips@relax-swap3.d: Likewise.
* testsuite/gas/mips/branch-extern-2.d: Likewise.
* testsuite/gas/mips/branch-extern-4.d: Likewise.
* testsuite/gas/mips/branch-section-2.d: Likewise.
* testsuite/gas/mips/branch-section-4.d: Likewise.
* testsuite/gas/mips/branch-weak-2.d: Likewise.
* testsuite/gas/mips/branch-weak-5.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
Likewise.
* testsuite/gas/mips/micromips-compact.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
ld/
* testsuite/ld-mips-elf/micromips-branch-absolute.d: Update
patterns for branch compaction.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend.d:
Likewise.
opcodes/
* micromips-opc.c (micromips_opcodes): Reorder "bc" next to "b",
"beqzc" next to "beq", "bnezc" next to "bne" and "jrc" next to
"j".
opcodes * arc-nps400-tbl.h: Change block comments to GNU format.
* arc-dis.c: Add new globals addrtypenames,
addrtypenames_max, and addtypeunknown.
(get_addrtype): New function.
(print_insn_arc): Print colons and address types when
required.
* arc-opc.c: Add MAKE_INSERT_NPS_ADDRTYPE macro and use to
define insert and extract functions for all address types.
(arc_operands): Add operands for colon and all address
types.
* arc-nps-400-tbl.h: Add NPS-400 BMU instructions to opcode table.
* arc-opc.c: Add NPS_BD_TYPE and NPS_BMU_NUM operands,
insert_nps_bd_num_buff and extract_nps_bd_num_buff functions.
* arc-nps-400-tbl.h: Add NPS-400 PMU instructions to opcode table.
* arc-opc.c: Add NPS_PMU_NXT_DST and NPS_PMU_NUM_JOB operands,
insert_nps_pmu_num_job and extract_nps_pmu_num_job functions.
include * opcode/arc.h: Add ARC_OPERAND_ADDRTYPE,
ARC_OPERAND_COLON. Add the arc_nps_address_type enum and
ARC_NUM_ADDRTYPES.
* opcode/arc.h: Add BMU to insn_class_t enum.
* opcode/arc.h: Add PMU to insn_class_t enum.
gas * config/tc-arc.c: Add new global arc_addrtype_hash.
Define O_colon and O_addrtype.
(debug_exp): Add O_colon and O_addrtype.
(tokenize_arguments): Handle colon and address type
tokens.
(declare_addrtype): New function.
(md_begin): Initialise arc_addrtype_hash.
(arc_parse_name): Add lookup of address types.
(assemble_insn): Handle colons and address types by
ignoring them.
* testsuite/gas/arc/nps400-8.s: New file.
* testsuite/gas/arc/nps400-8.d: New file.
* testsuite/gas/arc/nps400-8.s: Add PMU instruction tests.
* testsuite/gas/arc/nps400-8.d: Add expected PMU
instruction output.
The major reason this header was needed, bfd_default_set_arch_mach,
has now moved to bfd.h.
gdb/
* amd64-darwin-tdep.c: Don't include libbfd.h.
* i386-darwin-tdep.c: Likewise.
* rs6000-nat.c: Likewise.
* rs6000-tdep.c: Likewise.
sim/aarch64/
* memory.c: Don't include libbfd.h.
sim/rl78/
* load.c: Don't include libbfd.h.
(rl78_load): Don't use private iovec seek or read.
sim/rx/
* load.c: Don't include libbfd.h.
(rx_load): Don't use private iovec seek or read.
Debugging an x32 process with an x32 gdbserver always results in:
(gdb) c
Continuing.
Program received signal SIGSEGV, Segmentation fault.
0xf7de9600 in _dl_debug_state () from target:/libx32/ld-linux-x32.so.2
(gdb)
Looking at the remote debug logs reveals the problem, here:
Packet received: T05swbreak:;06:a0d4ffff00000000;07:b8d3ffff00000000;10:0096def701000000;thread:p7d7a.7d7a;core:1;
^^^^^^^^^^^^^^^^
The underlined value is the expedited value of RIP (in little endian).
But notice that 01 in 0x01f7de9600, while gdb says the program stopped
at 0xf7de9600. 0x01ffffffff is over 32 bits, which indicates that
something wen't wrong somewhere in gdbserver.
The problem turns out to be in gdbserver's x86_get_pc / x86_set_pc
routines, where "unsigned long" is used assuming that it can fit a
64-bit value, while unsigned long is actually 32-bit on x32. The
result is that collect_register_by_name / supply_register_by_name end
up reading/writing random bytes off the stack.
Fix this by using explicit uint64_t instead of unsigned long.
For consistency, use uint32_t instead of unsigned int in the 32-bit
paths.
gdb/gdbserver/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
PR server/20414
* linux-x86-low.c (x86_get_pc, x86_set_pc): Use uint64_t instead
of unsigned long for 64-bit registers and use uint32_t instead of
unsigned int for 32-bit registers.
PR python/20190 arose from an exception I noticed when trying to use
the Python unwinder for Spider Monkey in Firefox.
The problem is that the unwinder wants to examine the value of a
thread-local variable. However, sympy_value rejects this because
symbol_read_needs_frame returns true for a TLS variable.
This problem arose once before, though in a different context:
https://sourceware.org/bugzilla/show_bug.cgi?id=11803
At the time Pedro and Daniel pointed out a simpler way to fix that bug
(see links in 20190 if you are interested); but for this new bug I
couldn't think of a similar fix and ended up implementing Daniel's
other suggestion:
https://sourceware.org/ml/gdb-patches/2010-07/msg00393.html
That is, this patch makes it possible to detect whether a symbol needs
a specific frame, or whether it just needs the inferior to have
registers.
Built and regtested on x86-64 Fedora 24.
2016-07-26 Tom Tromey <tom@tromey.com>
* symtab.c (register_symbol_computed_impl): Update.
PR python/20190:
* value.h (symbol_read_needs): Declare.
(symbol_read_needs_frame): Add comment.
* symtab.h (struct symbol_computed_ops) <read_variable>: Update
comment.
<get_symbol_read_needs>: Rename. Change return type.
* findvar.c (symbol_read_needs): New function.
(symbol_read_needs_frame): Rewrite.
(default_read_var_value): Use symbol_read_needs.
* dwarf2loc.c (struct symbol_needs_baton): Rename.
<needs>: Renamed from needs_frame. Changed type.
(needs_frame_read_addr_from_reg, symbol_needs_get_reg_value)
(symbol_needs_read_mem, symbol_needs_frame_base)
(symbol_needs_frame_cfa, symbol_needs_tls_address)
(symbol_needs_dwarf_call): Rename.
(needs_dwarf_reg_entry_value): Update.
(symbol_needs_ctx_funcs, dwarf2_loc_desc_get_symbol_read_needs):
Rename and update.
(locexpr_get_symbol_read_needs, loclist_symbol_needs): Likewise.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum symbol_needs_kind): New.
2016-07-26 Tom Tromey <tom@tromey.com>
PR python/20190:
* gdb.threads/tls.exp (check_thread_local): Add python symbol
test.
Complement:
commit 1bbce13264
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Mon Jun 24 23:55:46 2013 +0000
<https://sourceware.org/ml/binutils/2013-06/msg00077.html>, ("MIPS:
Compressed PLT/stubs support"), and also choose between regular and
compressed PLT entries as appropriate for any branches referring.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): Handle branches
in PLT compression selection.
(_bfd_mips_elf_check_relocs): Likewise.
ld/
* testsuite/ld-mips-elf/compressed-plt-1.s: Add branch support.
* testsuite/ld-mips-elf/compressed-plt-1a.s: Likewise.
* testsuite/ld-mips-elf/compressed-plt-1b.s: Likewise.
* testsuite/ld-mips-elf/compressed-plt-1-o32-branch.od: New
test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-branch.rd: New
test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-bronly.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-bronly.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-branch.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-branch.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-bronly.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-bronly.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-branch.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-branch.rd:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
An x32 gdb always issues this warning:
(gdb) start
Temporary breakpoint 1 at 0x4043e9: file foo.c, line 25.
Starting program: a.out
warning: linux_ptrace_test_ret_to_nx: Cannot PTRACE_PEEKUSER: Input/output error
Temporary breakpoint 1, main (argc=1, argv=0xffffd544) at foo.c:25
25 {
(gdb)
As described in Linux commit 55283e253771 (x32: Add ptrace for x32):
[...] PTRACE_PEEKUSR and PTRACE_POKEUSR are only allowed to access
segment and debug registers. [...]
The fix is to use PTRACE_GETREGS instead.
gdb/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
* nat/linux-ptrace.c: Include "gregset.h".
(linux_ptrace_test_ret_to_nx): Use PTRACE_GETREGS instead of
PTRACE_PEEKUSER.
Building an x32 gdb trips on a static assertion:
In file included from .../src/gdb/common/common-defs.h:71:0,
from .../src/gdb/nat/amd64-linux-siginfo.c:21:
.../src/gdb/common/gdb_assert.h:26:66: error: size of array ‘never_defined_just_used_for_checking’ is negative
extern int never_defined_just_used_for_checking[(expr) ? 1 : -1]
^
.../src/gdb/nat/amd64-linux-siginfo.c:113:1: note: in expansion of macro ‘gdb_static_assert’
gdb_static_assert (sizeof (nat_siginfo_t) == sizeof (siginfo_t));
^
The problem is that the way nat_siginfo_t is defined, it can only
match the host's siginfo_t object when gdb is built as a 64-bit
program.
Several bits of nat_siginfo_t are off:
- nat_siginfo_t's _pad field's definition is:
int _pad[((128 / sizeof (int)) - 4)];
while /usr/include/bits/siginfo.h has:
# define __SI_MAX_SIZE 128
# if __WORDSIZE == 64
# define __SI_PAD_SIZE ((__SI_MAX_SIZE / sizeof (int)) - 4)
# else
# define __SI_PAD_SIZE ((__SI_MAX_SIZE / sizeof (int)) - 3)
# endif
and __WORDSIZE == 32 for x32. This is what causes the size of
nat_siginfo_t to be wrong and the assertion to fail.
- the nat_clock_t type is incorrect for 64-bit. We have this:
/* For native 64-bit, clock_t in _sigchld is 64bit aligned at 4 bytes. */
typedef long __attribute__ ((__aligned__ (4))) nat_clock_t;
however, /usr/include/bits/siginfo.h has:
# if defined __x86_64__ && __WORDSIZE == 32
/* si_utime and si_stime must be 4 byte aligned for x32 to match the
kernel. We align siginfo_t to 8 bytes so that si_utime and si_stime
are actually aligned to 8 bytes since their offsets are multiple of
8 bytes. */
typedef __clock_t __attribute__ ((__aligned__ (4))) __sigchld_clock_t;
# define __SI_ALIGNMENT __attribute__ ((__aligned__ (8)))
# else
typedef __clock_t __sigchld_clock_t;
# define __SI_ALIGNMENT
# endif
So we're currently forcing 4-byte alignment on clock_t, when it
should only be so for x32, not 64-bit.
The fix:
- Leaves nat_siginfo_t strictly for the 64-bit ABI.
- Adds a new typedef for the siginfo type that ptrace uses
(ptrace_siginfo_t). An x32 gdb always gets/sets an x32 siginfo_t
type with PTRACE_GETSIGINFO/PTRACE_SETSIGINFO.
- Uses this new ptrace_siginfo_t type instead of nat_siginfo_t as the
intermediate conversion type.
gdb/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (amd64_linux_siginfo_fixup): Rename 'native'
parameter to 'ptrace'.
* nat/amd64-linux-siginfo.c (GDB_SI_SIZE): New define.
(nat_uptr_t): New an unsigned long.
(nat_clock_t): Remove attribute __aligned__.
(struct nat_timeval): Delete.
(nat_siginfo_t): Remove attribute __aligned__.
(ptrace_siginfo_t): Define.
(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
(compat_x32_siginfo_from_siginfo)
(siginfo_from_compat_x32_siginfo): Make 'from' parameter const.
Convert through a ptrace_siginfo_t instead of a nat_siginfo_t.
Remove casts.
(amd64_linux_siginfo_fixup_common): Rename 'native' parameter to
'ptrace'. Remove static assertions.
(top level): New static assertions.
gdb/gdbserver/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (x86_siginfo_fixup): Rename 'native' parameter
to 'ptrace'.
ld * ldbuildid.c: Changes for MinGW32:
Include windows.h and rpcdce.h.
(validate_build_id_style): Allow "uuid" style.
(generate_build_id): Fill in id_bits using UuidCreate().
This CL implemented the following relocs for AArch64 target.
- R_AARCH64_MOVW_UABS_G*
- R_AARCH64_MOVW_SABS_G* relocations
gold/ChangeLog
2016-07-26 Igor Kudrin <ikudrin@accesssoftek.com>
* aarch64-reloc-property.cc (Rvalue_bit_select_impl): New class.
(rvalue_bit_select): Use Rvalue_bit_select_impl.
* aarch64-reloc.def (MOVW_UABS_G0, MOVW_UABS_G0_NC,
MOVW_UABS_G1,
MOVW_UABS_G1_NC, MOVW_UABS_G2, MOVW_UABS_G2_NC, MOVW_UABS_G3,
MOVW_SABS_G0, MOVW_SABS_G1, MOVW_SABS_G2): New relocations.
* aarch64.cc (Target_aarch64::Scan::local): Add cases for new
MOVW_UABS_* and MOVW_SABS_* relocations.
(Target_aarch64::Scan::global): Likewise.
(Target_aarch64::Relocate::relocate): Add cases and handlings
for new MOVW_UABS_* and MOVW_SABS_* relocations.
* testsuite/Makefile.am (aarch64_relocs): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_globals.s: New test source file.
* testsuite/aarch64_relocs.s: Likewise.
* testsuite/aarch64_relocs.sh: New test script.
Some btrace tests use assembly source files. They use the target triplet to
distinguish between x86_64 and ia32 ISA. This does not work for -m32 tests
without setting the target triplet to i686-?-?.
Instead use is_amd64_regs_target to distinguish between x86_64 and ia32 ISA.
See also https://sourceware.org/ml/gdb-patches/2016-07/msg00256.html.
testsuite/
* gdb.btrace/record_goto.exp: Use is_amd64_regs_target for selecting
assembly source files.
* gdb.btrace/stepi.exp: Use is_amd64_regs_target for selecting
assembly source files.
* gdb.btrace/tailcall.exp: Use is_amd64_regs_target for selecting
assembly source files.
* gdb.btrace/tailcall-only.exp: Use is_amd64_regs_target for selecting
assembly source files.
When a bad interpreter name is passed to new-ui, such as:
(gdb) new-ui bloop /dev/pts/10
A partially created UI is left in the UI list, with interp set to NULL.
Trying to do anything that will print on this UI (such as "start") will
cause a segmentation fault.
Changes in v2:
- Use with_test_prefix to namespace test procedures
- Give an explicit stable test name
- Add a "bad terminal path" test
- Remove useless runto_main
- Add missing intro comments
I did not factor out the pty spawn, as there is some magic involved I
don't quite understand. But it wouldn't bring that much anyway.
gdb/ChangeLog:
* top.h (make_delete_ui_cleanup): New declaration.
* top.c (delete_ui_cleanup): New function.
(make_delete_ui_cleanup): New function.
(new_ui_command): Create restore_ui cleanup earlier, create a
delete_ui cleanup and discard it on success.
gdb/testsuite/ChangeLog:
* gdb.base/new-ui.exp (do_test_invalid_args): New
procedure.
Since Linux 2.6.33, /proc/PID/status shows "t (tracing stop)", with
lowercase 't'. Because GDB is only expecting "T (tracing stop)", GDB
can incorrectly suppress errors in check_ptrace_stopped_lwp_gone:
1578 if (!check_ptrace_stopped_lwp_gone (lp))
1579 throw_exception (ex);
Ref: https://sourceware.org/ml/gdb-patches/2016-06/msg00072.html
2016-07-25 Pedro Alves <palves@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* nat/linux-procfs.c (parse_proc_status_state): Handle lowercase
't'.
Parse the process's /proc/PID/status state into an enum instead of the
current scheme of passing state strings around.
gdb/ChangeLog:
2016-07-25 Pedro Alves <palves@redhat.com>
* nat/linux-procfs.c (enum proc_state): New enum.
(parse_proc_status_state): New function.
(linux_proc_pid_get_state): Replace output string buffer parameter
with an output proc_state parameter. Use parse_proc_status_state.
(linux_proc_pid_is_gone): Adjust to use proc_state values.
(linux_proc_pid_has_state): Change type of 'state' parameter; now
an enum proc_state. Adjust to linux_proc_pid_get_state interface
change.
(linux_proc_pid_is_stopped)
(linux_proc_pid_is_trace_stopped_nowarn)
(linux_proc_pid_is_zombie_maybe_warn): Adjust to
linux_proc_pid_get_state interface change.
This patch allows gdbserver to continue recording after disconnect. On
reconnect, the recorded data is accessible to gdb as if no disconnect happened.
A possible application for this feature is remotely examine bugs that occur
at irregular intervals, where maintaining a gdb connection is inconvenient.
This also fixes the issue mentioned here:
https://sourceware.org/ml/gdb-patches/2015-11/msg00424.html
Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com>
gdb/ChangeLog:
* NEWS: Resume btrace on reconnect.
* record-btrace.c: Added record-btrace.h include.
(record_btrace_open): Split into this and ...
(record_btrace_push_target): ... this.
(record_btrace_disconnect): New function.
(init_record_btrace_ops): Use record_btrace_disconnect.
* record-btrace.h: New file.
* remote.c: Added record-btrace.h include.
(remote_start_remote): Check recording status.
(remote_btrace_maybe_reopen): New function.
gdb/doc/ChangeLog:
* gdb.texinfo: Resume btrace on reconnect.
gdb/testsuite/ChangeLog:
* gdb.btrace/reconnect.c: New file.
* gdb.btrace/reconnect.exp: New file.
Change-Id: I95e8b0ab8a89e58591aba0e63818cee82fd211bc
* testsuite/ld-elf/sec64k.exp: Run test for arc, msp430, or1k
and m32r. Correct comment. Relax ld -r match to account for
msp increased number of default sections.
Implement support to add catchpoints for a group of related syscalls
using the syntax:
(gdb) catch syscall group:<group>
or
(gdb) catch syscall g:<group>
Several groups are predefined in the xml files for all architectures
supported by GDB over Linux. They are based on the groups defined by
strace.
gdb/
* xml-syscall.c (get_syscalls_by_group): New.
(get_syscall_group_names): New.
(struct syscall_group_desc): New structure to store group data.
(struct syscalls_info): Include field to store the group list.
(sysinfo_free_syscall_group_desc): New.
(free_syscalls_info): Free group list.
(syscall_group_create_syscall_group_desc): New.
(syscall_group_add_syscall): New.
(syscall_create_syscall_desc): Add syscall to its groups.
(syscall_start_syscall): Load group attribute.
(syscall_group_get_group_by_name): New.
(xml_list_syscalls_by_group): New.
(xml_list_of_groups): New.
* xml-syscall.h (get_syscalls_by_group): Export function
to retrieve a list of syscalls filtered by the group name.
(get_syscall_group_names): Export function to retrieve the list
of syscall groups.
* break-catch-syscall.c (catch_syscall_split_args): Verify if
argument is a syscall group and expand it to a list of syscalls
when creating catchpoints.
(catch_syscall_completer): Add word completion for system call
groups.
* configure.ac: Include dependency for xsltproc when building
in maintainer-mode.
* break-catch-syscall.c (_initialize_breakpoint): Update catch
syscall command documentation.
* NEWS: Include section about catching groups of syscalls.
* configure: Regenerate.
* data-directory/Makefile.in: Generate syscall xml when building
in maintainer mode.
* syscalls/gdb-syscalls.dtd: Include group attribute to the
syscall element.
* syscalls/apply-defaults.xsl: New.
* syscalls/linux-defaults.xml.in: New.
* syscalls/aarch64-linux.xml: Rename to aarch64-linux.xml.in.
* syscalls/amd64-linux.xml: Rename to amd64-linux.xml.in.
* syscalls/arm-linux.xml: Rename to arm-linux.xml.in.
* syscalls/bfin-linux.xml: Rename to bfin-linux.xml.in.
* syscalls/i386-linux.xml: Rename to i386-linux.xml.in.
* syscalls/mips-n32-linux.xml: Rename to mips-n32-linux.xml.in.
* syscalls/mips-n64-linux.xml: Rename to mips-n64-linux.xml.in.
* syscalls/mips-o32-linux.xml: Rename to mips-o32-linux.xml.in.
* syscalls/ppc-linux.xml: Rename to ppc-linux.xml.in.
* syscalls/ppc64-linux.xml: Rename to ppc64-linux.xml.in.
* syscalls/s390-linux.xml: Rename to s390-linux.xml.in.
* syscalls/s390x-linux.xml: Rename to s390x-linux.xml.in.
* syscalls/sparc-linux.xml: Rename to sparc-linux.xml.in.
* syscalls/sparc64-linux.xml: Rename to sparc64-linux.xml.in.
* syscalls/aarch64-linux.xml: Regenerate.
* syscalls/amd64-linux.xml: Regenerate.
* syscalls/arm-linux.xml: Regenerate.
* syscalls/i386-linux.xml: Regenerate.
* syscalls/mips-n32-linux.xml: Regenerate.
* syscalls/mips-n64-linux.xml: Regenerate.
* syscalls/mips-o32-linux.xml: Regenerate.
* syscalls/ppc-linux.xml: Regenerate.
* syscalls/ppc64-linux.xml: Regenerate.
* syscalls/s390-linux.xml: Regenerate.
* syscalls/s390x-linux.xml: Regenerate.
* syscalls/sparc-linux.xml: Regenerate.
* syscalls/sparc64-linux.xml: Regenerate.
gdb/testsuite/
* gdb.base/catch-syscall.exp (do_syscall_tests): Add call
to test_catch_syscall_group.
(test_catch_syscall_group): New.
gdb/doc/
* gdb.texinfo (Set Catchpoints): Add 'group' argument to catch
syscall.
The problem here is ARMv8.1 (and ARMv8.2) define a
different debug version than ARMv8 (7 and 8 respectively).
This fixes hw watchpoints and breakpoints by checking
for those debug versions too.
Committed as obvious after a test on aarch64-linux-gnu
(on a ThunderX machine which has ARMv8.1 support enabled).
ChangeLog:
* nat/aarch64-linux-hw-point.c
(aarch64_linux_get_debug_reg_capacity): Handle
ARMv8.1 and ARMv8.2 debug versions.
* nat/aarch64-linux-hw-point.h
(AARCH64_DEBUG_ARCH_V8_1): New define.
(AARCH64_DEBUG_ARCH_V8_2): New define.
Signed-off-by: Andrew Pinski <apinski@cavium.com>
PR rust/20162 started life as a reminder to test gdb with versions of
rust after 1.8; but now concerns some gdb regressions seen with rust
1.10 ("beta") and 1.11 ("nightly").
The failures turn out to be a discrepancy between how rustc emits
DWARF and how gdb interprets it. In particular, rustc will emit DWARF
like:
<2><bc>: Abbrev Number: 9 (DW_TAG_structure_type)
<bd> DW_AT_name : (indirect string, offset: 0x46a): HasMethods
<c1> DW_AT_byte_size : 4
...
<3><cc>: Abbrev Number: 11 (DW_TAG_subprogram)
...
<df> DW_AT_name : (indirect string, offset: 0x514f): new
gdb wants to see a separate top-level DW_TAG_subprogram that refers to
this one via DW_AT_specification; but rustc doesn't emit one. By my
reading of DWARF 4 5.5.7, this is ok, and gdb is incorrect here.
Fixing this involved a new case in scan_partial_symbols, and then a
further change in process_structure_scope to account for the fact
that, in Rust, such functions are not methods and should not be
attached to the structure type.
Next, it turns out that rust is emitting bad values for
DW_AT_linkage_name, e.g.:
<db> DW_AT_linkage_name: (indirect string, offset: 0x422): _ZN7methods8{{impl}}3newE
The the "{{impl}}" stuff is apparently some side effect of a change to
the compiler's internal representation. Oops!
This also had a simple fix -- disregard these mangled names.
With these changes, there are no regressions in the gdb Rust tests
with either 1.10 or 1.11. 1.9, the stable release, is still pretty
broken, but I think there's nothing much to do about that.
These changes are a bit hackish, but no worse, I think, than other
kinds of quirk handling already done in the DWARF parser. I have
reported all the rustc bugs upstream. I plan to remove these hacks
from gdb some suitable time after they have been fixed in released
versions of Rust.
2016-07-22 Tom Tromey <tom@tromey.com>
PR rust/20162:
* dwarf2read.c (scan_partial_symbols) <DW_TAG_structure_type>:
Call scan_partial_symbols for children when reading a Rust CU.
(dwarf2_physname): Ignore invalid DW_AT_linkage_name generated by
rustc.
(process_structure_scope) <DW_TAG_subprogram>: Call
read_func_scope for Rust.
I see the following fail due to the warning,
-trace-frame-collected^M
[warning] Extracting signed value from an unsigned int (num)^M
....
FAIL: gdb.trace/mi-trace-frame-collected.exp: ctf: -trace-frame-collected
In ctf metadata, "num" in "tsv" is defined as unint32_t,
ctf_save_write_metadata (&writer->tcs,
"event {\n\tname = \"tsv\";\n\tid = %u;\n"
"\tfields := struct { \n"
"\t\tuint64_t val;\n"
"\t\tuint32_t num;\n"
"\t};\n"
"};\n", CTF_EVENT_ID_TSV);
so we should read it as unsigned. The patch below fixes the fail by
changing to bt_ctf_get_uint64.
gdb:
2016-07-22 Yao Qi <yao.qi@linaro.org>
* ctf.c (ctf_traceframe_info): Call bt_ctf_get_uint64 rather than
bt_ctf_get_int64.
bfd * arc-got.h (relocate_fix_got_relocs_for_got_info): Handle the case
where there's no elf_link_hash_entry while processing GOT_NORMAL got
entries.
ld * testsuite/ld-arc/got-01.d: New file.
* testsuite/ld-arc/got-01.s: New file.
I learned recently that empty struct expressions, like "X{}", have been
promoted from experimental to stable in Rust. This patch changes the
Rust expression parser to allow this case.
New test case included.
Built and regtested on x86-64 Fedora 23, using Rust 1.11 beta.
2016-07-21 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_tuple_struct_type_p): Return false for empty
structs.
* rust-exp.y (struct_expr_list): Allow empty elements.
2016-07-21 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.rs (main): Use empty struct expression.
* gdb.rust/simple.exp: Add tests for empty struct expression.
- A few missing casts required by C++, resulting in:
../../src/gdb/ser-go32.c:795:21: error: invalid conversion from 'const void*' to 'const char*' [-fpermissive]
etc.
- dos_noop has an incompatible prototype with struct serial_ops's
setparity, resulting in:
../../src/gdb/ser-go32.c:874:1: error: invalid conversion from 'int (*)(serial*)' to 'int (*)(serial*, int)' [-fpermissive]
(I thought of calling the ser-base.c default methods, but djgpp
doesn't include ser-base.c in the build.)
gdb/ChangeLog:
2016-07-21 Pedro Alves <palves@redhat.com>
* go32-nat.c (go32_create_inferior): Add cast.
* ser-go32.c (dos_noop): Delete.
(dos_flush_output, dos_setparity, dos_drain_output): New
functions.
(dos_write): Add cast.
(dos_ops): Use dos_flush_output, dos_setparity and
dos_drain_output.
* top.c (do_chdir_cleanup): Add cast.
GDBserver with software single step should be able to claim supporting
vCont s and S actions, so that GDB knows the remote target can do
single step. It doesn't matter to GDB that the single step in the
remote target is done via hardware or software.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* server.c (handle_v_requests): Support s and S actions
if target_supports_software_single_step return true.
This patch is to teach GDBserver using software single step to handle
vCont;s. Simply speaking, if the thread's resume request is resume_step,
install reinsert breakpoint at the next pcs when GDBserver is about to
resume threads. These reinsert breakpoints of a thread are removed,
when GDBserver gets an event from that thread and reports it back to
GDB.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* linux-low.c (resume_stopped_resumed_lwps): If resume request
is resume_step, call maybe_hw_step.
(linux_wait_1): Stop all threads, remove reinsert breakpoints,
and unstop them.
(linux_resume_one_lwp_throw): Don't assert the thread has reinsert
breakpoints or not.
(proceed_one_lwp): If resume request is resume_step, install
reinsert breakpoints and call maybe_hw_step.
Nowadays, we only enqueue signal when we leave thread pending in
linux_resume_one_thread. If lwp->resume->sig isn't zero (GDB wants
to resume with signal), we pass lwp->resume->sig to
linux_resume_one_lwp.
In order to reduce the difference between resuming thread with signal
and proceeding thread with signal, when we resume thread, we can
enqueue signal too, and proceed thread. The signal will be consumed in
linux_resume_one_lwp_throw from lwp->pending_signals.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* linux-low.c (proceed_one_lwp): Declare.
(linux_resume_one_thread): Remove local variable 'step'.
Lift code enqueue signal. Call proceed_one_lwp instead of
linux_resume_one_lwp.
install_software_single_step_breakpoints has parameter lwp, but still
need to switch to current_thread. In order to simplify its caller,
we do the current_thread save/restore inside install_software_single_step_breakpoints.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* gdbthread.h (make_cleanup_restore_current_thread): Declare.
* inferiors.c (do_restore_current_thread_cleanup): New function.
(make_cleanup_restore_current_thread): Likewise.
* linux-low.c (install_software_single_step_breakpoints): Call
make_cleanup_restore_current_thread. Switch current_thread to
thread.
This patch makes reinsert_breakpoint thread specific, which means we
insert and remove reinsert_breakpoint breakpoints for a specific
thread. This motivation of this change is that I'll use
reinsert_breakpoint for vCont;s on software single step target, so that
GDBserver may insert one reinsert_breakpoint for one thread doing
step-over, and insert one reinsert_breakpoint for another thread doing
vCont;s. After the operation of one thread is finished, GDBserver must
remove reinsert_breakpoint for that thread only.
On the other hand, reinsert_breakpoint is used for step-over nowadays.
GDBserver inserts reinsert_breakpoint, and wait only from the thread
doing step-over. After the step-over is done, GDBserver removes the
reinsert_breakpoint. If there is still any threads need step-over, do
the same again until all threads are finished step-over. In other words,
reinsert_breakpoint is globally thread specific, but in an implicit way.
It is natural to make it explicitly thread specific.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* mem-break.c (struct reinsert_breakpoint) <ptid>: New field.
(set_reinsert_breakpoint): New parameter ptid. Callers updated.
(clone_one_breakpoint): Likewise.
(delete_reinsert_breakpoints): Change parameter to thread.
Callers updated.
(has_reinsert_breakpoints): Likewise.
(uninsert_reinsert_breakpoints): Likewise.
(reinsert_reinsert_breakpoints): Likewise.
* mem-break.h (set_reinsert_breakpoint): Update declaration.
(delete_reinsert_breakpoints): Likewise.
(reinsert_reinsert_breakpoints): Likewise.
(uninsert_reinsert_breakpoints): Likewise.
(has_reinsert_breakpoints): Likewise.
This patch is to change the interface of clone_all_breakpoints, from
lists of breakpoints and raw_breakpoints to child thread and parent
thread. I choose child thread to pass because we need the ptid of
the child thread in the following patch.
gdb/gdbserver:
2016-07-21 Yao Qi <yao.qi@linaro.org>
* inferiors.c (get_thread_process): Make parameter const.
* inferiors.h (get_thread_process): Update declaration.
* mem-break.c (clone_all_breakpoints): Remove all parameters.
Add new parameters child_thread and parent_thread. Callers
updated.
* mem-break.h (clone_all_breakpoints): Update declaration.
