When interrupting a thread in non-stop vs all-stop, the signal given in
the MI *stopped event is not the same. Currently, mi_expect_interrupt only
accepts the case for non-stop, so this adds the alternative for all-stop.
gdb/testsuite/ChangeLog:
* lib/mi-support.exp (mi_expect_interrupt): Accept
alternative event for when in all-stop mode.
gdb_test_multiple is supposed to return -1 on internal error:
# Returns:
# 1 if the test failed, according to a built-in failure pattern
# 0 if only user-supplied patterns matched
# -1 if there was an internal error.
But alas, that's broken, it returns success... It looks like the code
is assuming an earlier 'set result -1' is still in effect, but
'result' is set to 0 at the end, just before we call gdb_expect:
set result 0
set code [catch {gdb_expect $code} string]
gdb/testsuite/
2015-03-02 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_multiple) <internal error>: Set result to
-1.
In some scenarios, GDB or GDBserver can be spawned with input _not_
connected to a tty, and then tests that rely on stdio fail with
timeouts, because the inferior's stdout and stderr streams end up
fully buffered.
See discussion here:
https://sourceware.org/ml/gdb-patches/2015-02/msg00809.html
We have a hack in place that works around this for Windows testing,
that forces every test program to link with an .o file that does
(lib/set_unbuffered_mode.c):
static int __gdb_set_unbuffered_output (void) __attribute__ ((constructor));
static int
__gdb_set_unbuffered_output (void)
{
setvbuf (stdout, NULL, _IONBF, BUFSIZ);
setvbuf (stderr, NULL, _IONBF, BUFSIZ);
}
That's a bit hacky; it ends up done for _all_ tests.
This patch adds a way to do this unbuffering explicitly from the test
code itself, so it is done only when necessary, and for all
targets/hosts. For starters, it adjusts gdb.base/interrupt.c to use
it.
Tested on x86_64 Fedora 20, native, and against a remote gdbserver
board file that connects to the target with ssh, with and without -t
(create pty).
gdb/testsuite/
2015-02-27 Pedro Alves <palves@redhat.com>
* lib/unbuffer_output.c: New file.
* gdb.base/interrupt.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
On aarch64, we got the following fail:
(gdb) disassemble func
Dump of assembler code for function func:
0x0000000000400730 <+0>: ret
End of assembler dump.^M
(gdb) x/2i func+0^M
0x400730 <func>: ret^M
0x400734 <main>: stp x29, x30, [sp,#-16]!^M
(gdb) FAIL: gdb.dwarf2/dw2-ifort-parameter.exp: x/2i func+0
the pattern in proc function_range expects to match <func+0>, however,
GDB doesn't display the offset when it is zero. This patch is to
adjust the pattern when $func_length is zero.
gdb/testsuite:
2015-02-26 Yao Qi <yao.qi@linaro.org>
* lib/dwarf.exp (function_range): Adjust pattern when $func_length
is zero.
Because delete_breakpoints uses gdb_expect directly, an internal error
results in slow timeouts instead of quickly bailing out. This patch
rewrites the procedure to use gdb_test_multiple instead, while
preserving the existing general logic ("delete breakpoints" + "info
breakpoints").
gdb/testsuite/
2015-02-23 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (delete_breakpoints): Rewrite using
gdb_test_multiple.
This patch adds some simple tests testing the support for DTrace USDT
probes. The testsuite will be skipped as unsupported in case the user
does not have DTrace installed on her system. The tests included in the
test suite test breakpointing on DTrace probes, enabling and disabling
probes, printing of probe arguments of several types and also
breakpointing on several probes with the same name.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* lib/dtrace.exp: New file.
* gdb.base/dtrace-probe.exp: Likewise.
* gdb.base/dtrace-probe.d: Likewise.
* gdb.base/dtrace-probe.c: Likewise.
* lib/pdtrace.in: Likewise.
* configure.ac: Output variables with the transformed names of
the strip, readelf, as and nm tools. AC_SUBST lib/pdtrace.in.
* configure: Regenerated.
gdb_interact is a small utility that we have found quite useful to debug
test cases.
Putting gdb_interact in a test suspends it and allows to interact with
gdb to inspect whatever you want. You can then type ">>>" to resume the
test execution. Of course, this is only for gdb devs. It wouldn't make
sense to leave a gdb_interact permanently in a test case.
When starting the interaction with the user, the script prints this
banner:
+------------------------------------------+
| Script interrupted, you can now interact |
| with by gdb. Type >>> to continue. |
+------------------------------------------+
Notes:
* When gdb is launched, the gdb_spawn_id variable (lib/gdb.exp) is
assigned -1. Given the name, I would expect it to contain the gdb
expect spawn id, which is needed for interact. I changed all places
that set gdb_spawn_id to -1 to set it to the actual gdb spawn id
instead.
* When entering the "interact" mode, the last (gdb) prompt is already
eaten by expect, so it doesn't show up on the terminal. Subsequent
prompts do appear though. We tried to print "(gdb)" just before the
interact to replace it. However, it could be misleading if you are
debugging an MI test case, it makes you think that you are typing in a
CLI prompt, when in reality it's MI. In the end I decided that since
the feature is for developers who know what they're doing and that one
is normally consciously using gdb_interact, the script doesn't need
to babysit the user.
* There are probably some quirks depending on where in the script
gdb_interact appears (e.g. it could interfere with following
commands and make them fail), but it works for most cases. Quirks can
always be fixed later.
The idea and original implementation was contributed by Anders
Granlund, a colleague of mine. Thanks to him.
gdb/testsuite/ChangeLog:
* gdb.base/statistics.exp: Assign spawn id to gdb_spawn_id.
* gdb.base/valgrind-db-attach.exp: Same.
* gdb.base/valgrind-infcall.exp: Same.
* lib/mi-support.exp (default_mi_gdb_start): Same.
* lib/prompt.exp (default_prompt_gdb_start): Same.
* lib/gdb.exp (default_gdb_spawn): Same.
(gdb_interact): New.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (Dwarf): Flag an error if a numeric attribute value
is given without an explicit form.
* gdb.dwarf2/arr-subrange.exp: Specify forms for all numeric
attributes.
* gdb.dwarf/corrupt.exp: Ditto.
* gdb.dwarf2/enum-type.exp: Ditto.
* gdb.trace/entry-values.exp: Ditto.
* gdb.trace/unavailable-dwarf-piece.exp: Ditto.
We already skip "attach" tests if the target board is remote, in
dejagnu's sense, as we use TCL's exec to spawn the program on the
build machine. We should also skip these tests if testing with
"target remote" or other stub-like targets where "attach" doesn't make
sense.
Add a helper procedure that centralizes the checks a test that needs
to spawn a program for testing "attach" and make all test files that
use spawn_wait_for_attach check it.
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (can_spawn_for_attach): New procedure.
(spawn_wait_for_attach): Error out if can_spawn_for_attach returns
false.
* gdb.base/attach.exp: Use can_spawn_for_attach instead of
checking whether the target board is remote.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Use can_spawn_for_attach before the
tests that need to attach, instead of checking whether the target
board is remote at the top of the file.
On Sun, 14 Dec 2014 07:00:28 +0100, Yao Qi wrote:
The build on mingw host is broken because mingw has no mkdtemp.
../../../git/gdb/compile/compile.c: In function 'get_compile_file_tempdir':
../../../git/gdb/compile/compile.c:194:3: error: implicit declaration of function 'mkdtemp' [-Werror=implicit-function-declaration]
tempdir_name = mkdtemp (tname);
^
../../../git/gdb/compile/compile.c:194:16: error: assignment makes pointer from integer without a cast [-Werror]
tempdir_name = mkdtemp (tname);
^
cc1: all warnings being treated as errors
In the end I have managed to test it by Wine myself:
$ wine build_win32/gdb/gdb.exe -q build_win32/gdb/gdb.exe -ex start -ex 'compile code 1' -ex 'set confirm no' -ex quit
[...]
Temporary breakpoint 1, main (argc=1, argv=0x241418) at ../../gdb/gdb.c:29
29 args.argc = argc;
Could not load libcc1.so: Module not found.
Even if it managed to load libcc1.so (it needs host-dependent name libcc1.dll)
then it would soon end up at least on:
default_infcall_mmap:
error (_("This target does not support inferior memory allocation by mmap."));
As currently there is only:
linux-tdep.c:
set_gdbarch_infcall_mmap (gdbarch, linux_infcall_mmap);
While one could debug Linux targets from MS-Windows host I find it somehow
overcomplicated now when we are trying to get it running at least on native
Linux x86*.
The 'compile' project needs a larger port effort to run on MS-Windows.
gdb/ChangeLog
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* compile/compile.c (get_compile_file_tempdir): Call error if
!HAVE_MKDTEMP.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (AC_CHECK_FUNCS): Add mkdtemp.
gdb/testsuite/ChangeLog
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* gdb.compile/compile-ops.exp: Update untested message if
!skip_compile_feature_tests.
* gdb.compile/compile-setjmp.exp: Likewise.
* gdb.compile/compile-tls.exp: Likewise.
* gdb.compile/compile.exp: Likewise.
* lib/gdb.exp (skip_compile_feature_tests): Check also "Command not
supported on this host".
When gdb starts, the lines that appear before the first prompt may get
paginated if the terminal in which the tests are ran is too small (in
terms of rows). These lines include the welcome/license message and
possibly more, such as "Reading symbols from...". Pagination is disabled
right after gdb is started (with "set height 0"), but this output happens
before we are able to set height.
If these lines get paginated, gdb waits for the user to press enter and
the test harness waits for gdb to print its prompt, resulting in a
deadlock.
My first idea was to launch gdb with --quiet. However, some lines are
still printed ("Reading symbols from...", some more stuff when attaching
with --pid, etc).
The proposed solution simply expects that pagination can occur after
starting gdb. If this is the case, it sends a "\n" and loops.
gdb/testsuite/Changelog:
* lib/gdb.exp (default_gdb_start): After starting gdb, loop
as long as we get pagination notifications.
This final patch adds the new "compile" command and subcommands, and
all the machinery needed to make it work.
A shared library supplied by gcc is used for all communications with
gcc. Types and most aspects of symbols are provided directly by gdb
to the compiler using this library.
gdb provides some information about the user's code using plain text.
Macros are emitted this way, and DWARF location expressions (and
bounds for VLA) are compiled to C code.
This hybrid approach was taken because, on the one hand, it is better
to provide global declarations and such on demand; but on the other
hand, for local variables, translating DWARF location expressions to C
was much simpler than exporting a full compiler API to gdb -- the same
result, only easier to implement, understand, and debug.
In the ordinary mode, the user's expression is wrapped in a dummy
function. After compilation, gdb inserts the resulting object code
into the inferior, then calls this function.
Access to local variables is provided by noting which registers are
used by location expressions, and passing a structure of register
values into the function. Writes to registers are supported by
copying out these values after the function returns.
This approach was taken so that we could eventually implement other
more interesting features based on this same infrastructure; for
example, we're planning to investigate inferior-side breakpoint
conditions.
gdb/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Update.
* symtab.h (struct symbol_computed_ops) <generate_c_location>: New
field.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_get_compile_instance,
la_compute_program>: New fields.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* jv-lang.c (java_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* dwarf2loc.h (dwarf2_compile_property_to_c): Declare.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): New
functions.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum compile_i_scope_types): New.
(enum command_control_type) <compile_control>: New constant.
(struct command_line) <control_u>: New field.
* d-lang.c (d_language_defn): Update.
* compile/compile.c: New file.
* compile/compile-c-support.c: New file.
* compile/compile-c-symbols.c: New file.
* compile/compile-c-types.c: New file.
* compile/compile.h: New file.
* compile/compile-internal.h: New file.
* compile/compile-loc2c.c: New file.
* compile/compile-object-load.c: New file.
* compile/compile-object-load.h: New file.
* compile/compile-object-run.c: New file.
* compile/compile-object-run.h: New file.
* cli/cli-script.c (multi_line_command_p, print_command_lines)
(execute_control_command, process_next_line)
(recurse_read_control_structure): Handle compile_control.
* c-lang.h (c_get_compile_context, c_compute_program): Declare.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-lang.c (ada_language_defn): Update.
* Makefile.in (SUBDIR_GCC_COMPILE_OBS, SUBDIR_GCC_COMPILE_SRCS):
New variables.
(SFILES): Add SUBDIR_GCC_COMPILE_SRCS.
(HFILES_NO_SRCDIR): Add compile.h.
(COMMON_OBS): Add SUBDIR_GCC_COMPILE_OBS.
(INIT_FILES): Add SUBDIR_GCC_COMPILE_SRCS.
(compile.o, compile-c-types.o, compile-c-symbols.o)
(compile-object-load.o, compile-object-run.o, compile-loc2c.o)
(compile-c-support.o): New targets.
gdb/doc/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Altering): Update.
(Compiling and Injecting Code): New node.
gdb/testsuite/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* configure.ac: Add gdb.compile/.
* configure: Regenerate.
* gdb.compile/Makefile.in: New file.
* gdb.compile/compile-ops.exp: New file.
* gdb.compile/compile-ops.c: New file.
* gdb.compile/compile-tls.c: New file.
* gdb.compile/compile-tls.exp: New file.
* gdb.compile/compile-constvar.S: New file.
* gdb.compile/compile-constvar.c: New file.
* gdb.compile/compile-mod.c: New file.
* gdb.compile/compile-nodebug.c: New file.
* gdb.compile/compile-setjmp-mod.c: New file.
* gdb.compile/compile-setjmp.c: New file.
* gdb.compile/compile-setjmp.exp: New file.
* gdb.compile/compile-shlib.c: New file.
* gdb.compile/compile.c: New file.
* gdb.compile/compile.exp: New file.
* lib/gdb.exp (skip_compile_feature_tests): New proc.
This changes the DWARF assembler to allow comments in a location
expression, and also adds support for a few new opcodes I needed.
gdb/testsuite/ChangeLog
2014-12-12 Tom Tromey <tromey@redhat.com>
* lib/dwarf.exp (_location): Ignore blank lines. Allow comments.
Handle DW_OP_pick, DW_OP_skip, DW_OP_bra.
This patch introduces a function in gdbserver-support.exp to find out
whether the current target is GDBserver.
The code was inspired from gdb.trace/qtro.exp, so it replaces the code
there by a call to the new function.
gdb/testsuite/ChangeLog:
* gdb.trace/qtro.exp: Replace gdbserver detection code by...
* lib/gdb.exp (target_is_gdbserver): New
procedure.
Dwarf::tu and Dwarf::cu allow selection of units with 64-bit offsets
through an option. When selected, unit size is encoded properly, but
offset to abbreviation unit is still encoded in a 4-byte field. This
patch fixes the problem.
Reproducer:
Dwarf::assemble "blah.s" {
tu {is_64 1 version 4 addr_size 8} 0x1122334455667788 the_type {
type_unit {} { the_type: }
}
cu {is_64 1 version 4 addr_size 8} {
compile_unit {{language @DW_LANG_C}} {}
}
}
gdb/testsuite:
* lib/dwarf.exp (Dwarf::cu, Dwarf::tu): Emit
${_cu_offset_size} bytes abbrev offset.
This patch addes DW macro attributes MACRO_AT_func and MACRO_AT_range
in dwarf assembler, which emits "DW_AT_low_pc func_start addr" and
"DW_AT_high_pc func_end addr". func_start and func_end are computed
automatically by proc function_range.
These two attributes are pseudo attribute or macro attribute, which
means they are not standard dwarf attribute in dwarf spec. Then can
be substituted or expanded to standard attributes or macro attributes.
See details in the comments to them. Dwarf assembler is extended to
handle them.
Now the attributes name/low_pc/high_pc can be replaced with
MACRO_AT_func like this:
subprogram {
{name main}
{low_pc main_start addr}
{high_pc main_end addr}
}
becomes:
subprogram {
{MACRO_AT_func { main ${srcdir}/${subdir}/${srcfile} }}
}
users don't have to worry about the start and end of function main, and
they only need to add a label main_label in main.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* lib/dwarf.exp (function_range): New procedure.
(Dwarf::_handle_macro_at_func): New procedure.
(Dwarf::_handle_macro_at_range): New procedure.
(Dwarf): Handle MACRO_AT_func and MACRO_AT_range.
This patch is to move some code to a new procedure _handle_attribute,
which will be used in my following patches.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* lib/dwarf.exp (_handle_DW_TAG): Move some code to ...
(_handle_attribute): New procedure.
I see the following two fails on arm-none-eabi target, because argv[0]
isn't available.
print argv[0]^M
$1 = 0x1f78 "/dev/null"^M
(gdb) FAIL: gdb.base/argv0-symlink.exp: kept file symbolic link name
print argv[0]^M
$1 = 0x1f78 "/dev/null"^M
(gdb) FAIL: gdb.base/argv0-symlink.exp: kept directory symbolic link name
My first thought is to check [target_info exists noargs], and skip the
test if it returns true. However, noargs is set in gdbserver board
files, so argv0-symlink.exp will be skipped on gdbserver board file.
The change is too aggressive.
When the program is running with gdbserver, argv[1] to argv[N] aren't
available, but argv[0] is. Fortunately, argv0-symlink.exp only
requires argv[0]. argv0-symlink.exp can be run with gdbserver board
file, as what we do now.
What we need to check is whether argv[0] is available, so I add a new
proc gdb_has_argv0 to do so by starting a program, and check
argc/argv[0] to see whether argv[0] is available.
Dan fixed the similar problem by checking noargs, which is too strong.
https://sourceware.org/ml/gdb-patches/2010-02/msg00398.html as a
result, the test is skipped on gdbserver. This patch fixed it too.
gdb/testsuite:
2014-10-18 Yao Qi <yao@codesourcery.com>
* gdb.base/argv0-symlink.exp: Check argv[0] value if
gdb_has_argv0 return true.
* gdb.guile/scm-value.exp (test_value_in_inferior): Don't
check [target_info exists noargs], check [gdb_has_argv0]
instead.
* gdb.python/py-value.exp (test_value_in_inferior): Likewise.
* lib/gdb.exp (gdb_has_argv0, gdb_has_argv0_1): New
procedures.
When I run test with board file local-remote-host-native.exp, I see
the following warning,
$ make check RUNTESTFLAGS="--host_board=local-remote-host-native
--target_board=local-remote-host-native tdesc-arch.exp
HOST_DIR=/tmp/foo/"
(gdb) set tdesc filename ../../../../git/gdb/testsuite/gdb.xml/trivial.xml^M
warning: Could not open "../../../../git/gdb/testsuite/gdb.xml/trivial.xml"
(gdb) quit^
because "${srcdir}/gdb.xml/trivial.xml" doesn't exist on host. This
patch is to copy trivial.xml to host and the warning goes away.
(gdb) set tdesc filename /tmp/foo/trivial.xml^M
(gdb) quit^
tdesc-regs.exp has the similar problem that single-reg.xml may not
exist on host at all, and it should be copied to host too.
gdb/testsuite:
2014-10-17 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
* gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.
This does most of the mechanical removal. IOW, the easy part.
This doesn't touch procfs.c as that'd be a harder excision,
potentially affecting Solaris.
mips-tdep.c is left alone. E.g., I didn't delete the GDB_OSABI_IRIX
enum value, nor references to it in mips-tdep.c. Some comments
mentioning IRIX ABIs may still be relevant and I wouldn't know what to
do with them. in That can always be done on a separate pass,
preferably by someone who can test on MIPS.
I didn't remove a reference to IRIX in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=mips-sgi-irix6 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration mips-sgi-irix6 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `/home/pedro/gdb/mygit/build-irix'
make: *** [all] Error 2
gdb/
2014-10-10 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Remove mips-irix-tdep.o and solib-irix.o.
(ALLDEPFILES): Remove mips-irix-tdep.c and solib-irix.c.
(HFILES_NO_SRCDIR): Remove solib-irix.h.
* NEWS: Mention that support for mips-sgi-irix5* mips-sgi-irix6*
and been removed.
* config/mips/irix5.mh, config/mips/irix6.mh: Delete files.
* configure.ac: Remove references to IRIX.
* configure.host: Add *-*-irix* to the obsolete hosts section.
Remove all other references to irix.
* irix5-nat.c, mips-irix-tdep.c, solib-irix.c, solib-irix.h:
Delete files.
gdb/testsuite/
2014-10-10 Pedro Alves <palves@redhat.com>
* gdb.base/bigcore.exp: Remove references to IRIX.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/mips_pro.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
I had occasion to use with_gdb_prompt in a test for the patch for PR 17314
and was passing the plain text prompt as the value, "(top-gdb)",
instead of a regexp, "\(top-gdb\)" (expressed as "\\(top-gdb\\)" in TCL).
I then discovered that in order to restore the prompt gdb passes the
original value of $gdb_prompt to "set prompt", which works because
"set prompt \(gdb\) " is equivalent to "set prompt (gdb) ".
Perhaps I'm being overly cautious but this feels a bit subtle,
but at any rate as an API choice I'd much rather pass the plain text
form to with_gdb_prompt.
I also discovered that the initial value of gdb_prompt is set in
two places to two different values.
At the global level gdb.exp sets it to "\[(\]gdb\[)\]"
and default_gdb_init sets it to "\\(gdb\\)".
The former form is undesirable as an argument to "set prompt",
but it's not clear to me that just deleting this code won't break
anything. Thus I just changed the value to be consistent and added
a comment.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_prompt): Add comment and change initial value to
be consistent with what default_gdb_init uses.
(with_gdb_prompt): Change form of PROMPT argument from a regexp to
the plain text of the prompt. Add some logging printfs.
* gdb.perf/disassemble.exp: Update call to with_gdb_prompt.
Doing:
gdb --pid=PID -ex run
Results in GDB getting a SIGTTIN, and thus ending stopped. That's
usually indicative of a missing target_terminal_ours call.
E.g., from the PR:
$ sleep 1h & p=$!; sleep 0.1; gdb -batch sleep $p -ex run
[1] 28263
[1] Killed sleep 1h
[2]+ Stopped gdb -batch sleep $p -ex run
The workaround is doing:
gdb -ex "attach $PID" -ex "run"
instead of
gdb [-p] $PID -ex "run"
With the former, gdb waits for the attach command to complete before
moving on to the "run" command, because the interpreter is in sync
mode at this point, within execute_command. But for the latter,
attach_command is called directly from captured_main, and thus misses
that waiting. IOW, "run" is running before the attach continuation
has run, before the program stops and attach completes. The broken
terminal settings are just one symptom of that. Any command that
queries or requires input results in the same.
The fix is to wait in catch_command_errors (which is specific to
main.c nowadays), just like we wait in execute_command.
gdb/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* main.c: Include "infrun.h".
(catch_command_errors, catch_command_errors_const): Wait for the
foreground command to complete.
* top.c (maybe_wait_sync_command_done): New function, factored out
from ...
(maybe_wait_sync_command_done): ... here.
* top.h (maybe_wait_sync_command_done): New declaration.
gdb/testsuite/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
* gdb.base/attach.exp (test_command_line_attach_run): New
procedure.
(top level): Call it.
Several places in the testsuite have a copy of a snippet of code that
spawns a test program, waits a bit, and then does some PID munging for
Cygwin. This is in order to have GDB attach to the spawned program.
This refactors all that to a common procedure.
(multi-attach.exp wants to spawn multiple processes, so this makes the
new procedure's interface work with lists.)
Tested on x86_64 Fedora 20.
gdb/testsuite/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (spawn_wait_for_attach): New procedure.
* gdb.base/attach.exp (do_attach_tests, do_call_attach_tests)
(do_command_attach_tests): Use spawn_wait_for_attach.
* gdb.base/solib-overlap.exp: Likewise.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
The recent change to introduce `gdb_reverse_timeout' turned out
ineffective for board setups that set the `gdb,timeout' target variable.
A lower `gdb,timeout' setting takes precedence and defeats the effect of
`gdb_reverse_timeout'. This is because the global timeout is overridden
in gdb_test_multiple and then again in gdb_expect.
Three timeout variables are taken into account in these two places, in
this precedence:
1. The `gdb,timeout' target variable.
2. The caller's local `timeout' variable (upvar timeout)
3. The global `timeout' variable.
This precedence is obeyed by gdb_test_multiple strictly. OTOH
gdb_expect will select the higher of the two formers and will only take
the latter into account if none of the formers is present. However the
two timeout selections are conceptually the same and gdb_test_multiple
does its only for the purpose of passing it down to gdb_expect.
Therefore I decided there is no point to keep carrying on this
duplication and removed the sequence from gdb_test_multiple, however
retaining the `upvar timeout' variable definition. This way gdb_expect
will still access gdb_test_multiple's caller `timeout' variable (if any)
via its own `upvar timeout' reference.
Now as to the sequence in gdb_expect. In addition to the three
variables described above it also takes a timeout argument into account,
as the fourth value to choose from. It is currently used if it is
higher than the timeout selected from the variables as described above.
With the timeout selection code from gdb_test_multiple gone, gone is
also the most prominent use of this timeout argument, it's now used in
a couple of places only, mostly within this test framework library code
itself for preparatory commands or suchlike. With this being the case
this timeout selection code can be simplified as follows:
1. Among the three timeout variables, the highest is always chosen.
This is so that a test case doesn't inadvertently lower a high value
timeout needed by slow target boards. This is what all test cases
use.
2. Any timeout argument takes precedence. This is for special cases
such as within the framework library code, e.g. it doesn't make sense
to send `set height 0' with a timeout of 7200 seconds. This is a
local command that does not interact with the target and setting a
high timeout here only risks a test suite run taking ages if it goes
astray for some reason.
3. The fallback timeout of 60s remains.
* lib/gdb.exp (gdb_test_multiple): Remove code to select the
timeout, don't pass one down to gdb_expect.
(gdb_expect): Rework timeout selection.
As it happens we have a board that fails a gdb.base/gcore-relro.exp
test case reproducibly and moreover the case appears to trigger a
kernel bug making the it less than usable. Specifically the board
remains responsive to some extent, however processes do not appear
to be able to successfully complete termination anymore and perhaps
more importantly further gdbserver processes can be started, but they
never reach the stage of listening on the RSP socket.
This change handles timeouts in gdbserver start properly, by throwing
a TCL error exception when gdbserver does not report listening on the
RSP socket in time. This is then caught at the outer level and
reported, and 2 rather than 1 is returned so that the caller may tell
the failure to start gdbserver and other issues apart and act
accordingly (or do nothing).
I thought letting the exception unwind further on might be a good idea
for any test harnesses out there to break outright where a gdbserver
start error is silently ignored right now, however I figured out the
calls to gdbserver-support.exp are buried down too deep in the GDB test
suite for such a change to be made easily. I think returning a distinct
return value is good enough (the API says "non-zero", so 2 is as good as
1) and we can always make the error harder in a later step if required.
With config/gdbserver.exp being used this change remains transparent
to the target board, the return value is passed up by gdb_reload and
the error exception unwinds through gdbserver_gdb_load and is caught
and handled by mi_gdb_target_load. A call to perror is still made,
reporting the timeout, and in the case of mi_gdb_target_load the
procedure returns a value denoting unsuccessful completion. An
unsuccessful completion of gdb_reload is already handled elsewhere.
An alternative gdbserver board configuration can interpret the return
value in its gdb_reload implementation and catch the error in
gdbserver_gdb_load in an attempt to recover a target board that has
gone astray, for example by rebooting the board somehow. This has
proved effective with our failing board, that now completes the
remaining test cases with no further hiccups.
* lib/gdbserver-support.exp (gdbserver_start): Throw an error
exception on timeout.
(gdbserver_run): Catch any `gdbserver_spawn' error exceptions.
(gdbserver_start_extended): Catch any `gdbserver_start' error
exceptions.
(gdbserver_start_multi, mi_gdbserver_start_multi): Likewise.
* lib/mi-support.exp (mi_gdb_target_load): Catch any
`gdbserver_gdb_load' error exceptions.
Gdbserver support code uses the global timeout value to determine when
to stop waiting for a gdbserver process being started to respond before
continuing anyway. This timeout is usually as low as 10s and may not
be enough in this context, for example on the first run where the
filesystem cache is cold, even if it is elsewhere.
E.g. I observe this reliably with gdbserver started the first time in
QEMU running in the system emulation mode:
(gdb) file .../gdb.base/advance
Reading symbols from .../gdb.base/advance...done.
(gdb) delete breakpoints
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) break main
Breakpoint 1 at 0x87f8: file .../gdb.base/advance.c,
line 41.
(gdb) set remotetimeout 15
(gdb) kill
The program is not being run.
(gdb)
[...]
.../bin/gdbserver --once :6014 advance
target remote localhost:6014
Remote debugging using localhost:6014
Remote communication error. Target disconnected.: Connection reset by peer.
(gdb) continue
The program is not being run.
(gdb) Process advance created; pid = 999
Listening on port 6014
FAIL: gdb.base/advance.exp: Can't run to main
-- notice how the test harness proceeded with the `target remote ...'
command even though gdbserver hasn't completed its startup yet. A
while later when it's finally ready it's too late already. I checked
the timing here and it takes gdbserver roughly 25 seconds to start in
this scenario. Subsequent gdbserver starts in the same test run take
less time and usually complete within 10 seconds although occasionally
`target remote ...' precedes the corresponding `Listening on port...'
message again.
Therefore I have fixed this problem by setting an explicit timeout to
120s on the expect call in question. If this turns out too arbitrary
sometime, then perhaps a separate `gdbserver_timeout' setting might be
due.
* lib/gdbserver-support.exp (gdbserver_start): Set timeout to
120 on waiting for the TCP socket to open.
Checking whether the gcore command is included in the GDB build as
proxy for checking whether core dumping is supported by the target is
useless, as gcore.o has been in COMMON_OBS since git 9b4eba8e:
2009-10-26 Michael Snyder <msnyder@vmware.com>
Hui Zhu <teawater@gmail.com>
* Makefile.in (SFILES): Add gcore.c.
(COMMON_OBS): Add gcore.o.
* config/alpha/alpha-linux.mh (NATDEPFILES): Delete gcore.o.
* config/alpha/fbsd.mh (NATDEPFILES): Ditto.
...
IOW, the command is always included in the build.
Instead, nowadays, tests bail out if actually trying to generate a
core fails with an indication the target doesn't support it. See
gdb_gcore_cmd and callers.
Tested on x86_64 Fedora 20.
gdb/testsuite/ChangeLog:
* gdb.base/gcore-buffer-overflow.exp: Remove "help gcore" test.
* gdb.base/gcore-relro-pie.exp: Likewise.
* gdb.base/gcore-relro.exp: Likewise.
* gdb.base/gcore.exp: Likewise.
* gdb.base/print-symbol-loading.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* lib/gdb.exp (gdb_gcore_cmd): Don't expect "Undefined command".
This integrates Jan Kratochvil's nice race reproducer from PR
testsuite/12649 into the testsuite infrustructure directly.
With this, one only has to do either 'make check-read1' or 'make check
READ1="1"' to preload the read1.so library into expect.
Currently only enabled for glibc/GNU systems, and if
build==host==target.
gdb/testsuite/ChangeLog:
* Makefile.in (EXTRA_RULES, CC): New variables, get from
configure.
(EXPECT): Handle READ1 being set.
(all): Depend on EXTRA_RULES.
(check-read1, expect-read1, read1.so, read1): New rules.
* README (Testsuite Parameters): Document the READ1 make variable.
(Race detection): New section.
* configure: Regenerate.
* configure.ac: If build==host==target, and running under a
GNU/glibc system, add read1 to the extra Makefile rules.
(EXTRA_RULES): AC_SUBST it.
* lib/read1.c: New file.
gdb/ChangeLog:
* Makefile.in (check-read1): New rule.
I find some gdb.python tests fail on arm-none-eabi target, because the
tests assume that memory on address 0x is inaccessible. Some tests
(in gdb.base) are aware of this, so do a "x 0" check first. However,
the code is copy-n-paste.
This patch is to move the "x 0" check to a procedure in lib/gdb.exp,
and get needed tests call it. The original code matches pattern
"0x0:\[ \t\]*Error accessing memory address 0x0\r\n$gdb_prompt $", but
I remove it from the new proc is_address_zero_readable, because GDB
doesn't emit such message any more.
gdb/testsuite:
2014-08-09 Yao Qi <yao@codesourcery.com>
* gdb.base/display.exp: Invoke is_address_zero_readable.
* gdb.guile/scm-value.exp (test_value_in_inferior): Likewise.
* gdb.python/py-value.exp (test_value_in_inferior): Likewise.
* gdb.base/hbreak-unmapped.exp: Return if
is_address_zero_readable returns true.
* gdb.base/signest.exp: Likewise.
* gdb.base/signull.exp: Likewise.
* gdb.base/sigbpt.exp: Likewise.
* gdb.guile/scm-disasm.exp: Do the test if
is_address_zero_readable returns false.
* gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise.
* gdb.python/py-arch.exp: Likewise.
* gdb.python/py-prettyprint.exp (run_lang_tests): Likewise.
* lib/gdb.exp (is_address_zero_readable): New proc.
Jan pointed out in
<https://sourceware.org/ml/gdb-patches/2014-07/msg00553.html> that
these testcases have racy results:
gdb.base/double-prompt-target-event-error.exp
gdb.base/paginate-after-ctrl-c-running.exp
gdb.base/paginate-bg-execution.exp
gdb.base/paginate-execution-startup.exp
gdb.base/paginate-inferior-exit.exp
This is easily reproducible with "read1" from:
[reproducer for races of expect incomplete reads]
http://sourceware.org/bugzilla/show_bug.cgi?id=12649
The '-notransfer -re "<return>" { exp_continue }' trick in the current
tests doesn't actually work.
The issue that led to the -notransfer trick was that
"---Type <return> to continue, or q <return> to quit---"
has two "<return>"s. If one wants gdb_test_multiple to not hit the
built-in "<return>" match that results in FAIL, one has to expect the
pagination prompt in chunks, first up to the first "<return>", then
again, up to the second. Something around these lines:
gdb_test_multiple "" $test {
-re "<return>" {
exp_continue
}
-re "to quit ---" {
pass $test
}
}
The intent was for -notransfer+exp_continue to make expect fetch more
input, and rerun the matches against the now potentially fuller
buffer, and then eventually the -re that includes the full pagination
prompt regex would match instead (because it's listed higher up, it
would match first). But, once that "<return>" -notransfer -re
matches, it keeps re-matching forever. It seems like with
exp_continue, expect immediately retries matching, instead of first
reading in more data into the buffer, if available.
Fix this like I should have done in the first place. There's actually
no good reason for gdb_test_multiple to only match "<return>". We can
make gdb_test_multiple expect the whole pagination prompt text
instead, which is store in the 'pagination_prompt' global (similar to
'gdb_prompt'). Then a gdb_test_multiple caller that doesn't want the
default match to trigger, because it wants to see one pagination
prompt, does simply:
gdb_test_multiple "" $test {
-re "$pagination_prompt$" {
pass $test
}
}
which is just like when we don't want the default $gdb_prompt match
within gdb_test_multiple to trigger, like:
gdb_test_multiple "" $test {
-re "$gdb_prompt $" {
pass $test
}
}
Tested on x86_64 Fedora 20. In addition, I've let the racy tests run
all in parallel in a loop for 30 minutes, and they never failed.
gdb/testsuite/
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.base/double-prompt-target-event-error.exp
(cancel_pagination_in_target_event): Remove '-notransfer <return>'
match.
(cancel_pagination_in_target_event): Rework double prompt
detection.
* gdb.base/paginate-after-ctrl-c-running.exp
(test_ctrlc_while_target_running_paginates): Remove '-notransfer
<return>' match.
* gdb.base/paginate-bg-execution.exp
(test_bg_execution_pagination_return)
(test_bg_execution_pagination_cancel): Remove '-notransfer
<return>' matches.
* gdb.base/paginate-execution-startup.exp
(test_fg_execution_pagination_return)
(test_fg_execution_pagination_cancel): Remove '-notransfer
<return>' matches.
* gdb.base/paginate-inferior-exit.exp
(test_paginate_inferior_exited): Remove '-notransfer <return>'
match.
* lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp.
* lib/gdb.exp (pagination_prompt): Run text through
string_to_regexp.
(gdb_test_multiple): Match $pagination_prompt instead of
"<return>".
(string_to_regexp): Move to lib/gdb-utils.exp.
This fixes:
$ ./gdb program -ex "set height 2" -ex "start"
...
Reading symbols from /home/pedro/gdb/tests/threads...done.
---Type <return> to continue, or q <return> to quit---^CQuit << ctrl-c triggers a Quit
*type something*
readline: readline_callback_read_char() called with no handler!
Aborted
$
Usually, if an error propagates all the way to the top level, we'll
re-enable stdin, in case the command that was running was a
synchronous command. That's done in the event loop's actual loop
(event-loop.c:start_event_loop). However, if a foreground execution
command is run before the event loop starts and throws, nothing is
presently reenabling stdin, which leaves sync_execution set.
When we do start the event loop, because sync_execution is still
(mistakenly) set, display_gdb_prompt removes the readline input
callback, even though stdin is registered in the event loop. Any
input from here on results in readline aborting.
Such commands are run through catch_command_errors,
catch_command_errors_const, so add the tweak there.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* main.c: Include event-top.h.
(handle_command_errors): New function.
(catch_command_errors, catch_command_errors_const): Use it.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* gdb.base/paginate-execution-startup.c: New file.
* gdb.base/paginate-execution-startup.exp: New file.
* lib/gdb.exp (pagination_prompt): New global.
(default_gdb_spawn): New procedure, factored out from
default_gdb_spawn.
(default_gdb_start): Adjust to call default_gdb_spawn.
(gdb_spawn): New procedure.
Often we'll do something like:
if {$ok} {
fail "whatever"
} else {
pass "whatever"
}
This adds a helper procedure for that, and converts one random place
to use it, as an example.
2014-07-14 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_assert): New procedure.
* gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Use it.
Right now we provide a board info entry, `gdb_init_command', that allows
one to send a single command to GDB before the program to be debugged is
started. This is useful e.g. for slow remote targets to change the
default "remotetimeout" setting. Occasionally I found a need to send
multiple commands instead, however this cannot be achieved with
`gdb_init_command'.
This change therefore extends the mechanism by adding a TCL list of GDB
commands to send, via a board info entry called `gdb_init_commands'.
There is no limit as to the number of commands put there. The old
`gdb_init_command' mechanism remains supported for compatibility with
existing people's environments.
* lib/gdb-utils.exp: New file.
* lib/gdb.exp (gdb_run_cmd): Call gdb_init_commands, replacing
inline `gdb_init_command' processing.
(gdb_start_cmd): Likewise.
* lib/mi-support.exp (mi_run_cmd): Likewise.
* README: Document `gdb_init_command' and `gdb_init_commands'.
This finally makes background execution commands possible by default.
However, in order to do that, there's one last thing we need to do --
we need to separate the MI and target notions of "async". Unlike the
CLI, where the user explicitly requests foreground vs background
execution in the execution command itself (c vs c&), MI chose to treat
"set target-async" specially -- setting it changes the default
behavior of execution commands.
So, we can't simply "set target-async" default to on, as that would
affect MI frontends. Instead we have to make the setting MI-specific,
and teach MI about sync commands on top of an async target.
Because the "target" word in "set target-async" ends up as a potential
source of confusion, the patch adds a "set mi-async" option, and makes
"set target-async" a deprecated alias.
Rather than make the targets always async, this patch introduces a new
"maint set target-async" option so that the GDB developer can control
whether the target is async. This makes it simpler to debug issues
arising only in the synchronous mode; important because sync mode
seems unlikely to go away.
Unlike in previous revisions, "set target-async" does not affect this
new maint parameter. The rationale for this is that then one can
easily run the test suite in the "maint set target-async off" mode and
have tests that enable mi-async fail just like they fail on
non-async-capable targets. This emulation is exactly the point of the
maint option.
I had asked Tom in a previous iteration to split the actual change of
the target async default to a separate patch, but it turns out that
that is quite awkward in this version of the patch, because with MI
async and target async decoupled (unlike in previous versions), if we
don't flip the default at the same time, then just "set target-async
on" alone never actually manages to do anything. It's best to not
have that transitory state in the tree.
Given "set target-async on" now only has effect for MI, the patch goes
through the testsuite removing it from non-MI tests. MI tests are
adjusted to use the new and less confusing "mi-async" spelling.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Mention "maint set target-async", "set mi-async", and that
background execution commands are now always available.
* target.h (target_async_permitted): Update comment.
* target.c (target_async_permitted, target_async_permitted_1):
Default to 1.
(set_target_async_command): Rename to ...
(maint_set_target_async_command): ... this.
(show_target_async_command): Rename to ...
(maint_show_target_async_command): ... this.
(_initialize_target): Adjust.
* infcmd.c (prepare_execution_command): Make extern.
* inferior.h (prepare_execution_command): Declare.
* infrun.c (set_observer_mode): Leave target async alone.
* mi/mi-interp.c (mi_interpreter_init): Install
mi_on_sync_execution_done as sync_execution_done observer.
(mi_on_sync_execution_done): New function.
(mi_execute_command_input_handler): Don't print the prompt if we
just started a synchronous command with an async target.
(mi_on_resume): Check sync_execution before printing prompt.
* mi/mi-main.h (mi_async_p): Declare.
* mi/mi-main.c: Include gdbcmd.h.
(mi_async_p): New function.
(mi_async, mi_async_1): New globals.
(set_mi_async_command, show_mi_async_command, mi_async): New
functions.
(exec_continue): Call prepare_execution_command.
(run_one_inferior, mi_cmd_exec_run, mi_cmd_list_target_features)
(mi_execute_async_cli_command): Use mi_async_p.
(_initialize_mi_main): Install "set mi-async". Make
"target-async" a deprecated alias.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Non-Stop Mode): Remove "set target-async 1"
from example.
(Asynchronous and non-stop modes): Document '-gdb-set mi-async'.
Mention that target-async is now deprecated.
(Maintenance Commands): Document maint set/show target-async.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* gdb.base/async-shell.exp: Don't enable target-async.
* gdb.base/async.exp
* gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
parameter. Adjust.
(top level): Don't test with "target-async".
* gdb.base/dprintf-non-stop.exp: Don't enable target-async.
* gdb.base/gdb-sigterm.exp: Don't test with "target-async".
* gdb.base/inferior-died.exp: Don't enable target-async.
* gdb.base/interrupt-noterm.exp: Likewise.
* gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
* gdb.mi/mi-nonstop-exit.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-ns-stale-regcache.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.mi/mi-nsmoribund.exp: Likewise.
* gdb.mi/mi-nsthrexec.exp: Likewise.
* gdb.mi/mi-watch-nonstop.exp: Likewise.
* gdb.multi/watchpoint-multi.exp: Adjust comment.
* gdb.python/py-evsignal.exp: Don't enable target-async.
* gdb.python/py-evthreads.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.reverse/break-precsave.exp: Don't test with "target-async".
* gdb.server/solib-list.exp: Don't enable target-async.
* gdb.threads/thread-specific-bp.exp: Likewise.
* lib/mi-support.exp: Adjust to use mi-async.
Allow gcore's capture_command_output function to be used by other tests.
testsuite/
* gdb.base/gcore.exp (capture_command_output): Move ...
* lib/gdb.exp (capture_command_output): ... here.
It should clear up confusion about the args parameter to mi_run_cmd_full.
Thanks to Joel for clear formulation. I also added a comment about the
impact of use_gdb_stub.
gdb/testsuite/ChangeLog:
2014-05-22 Simon Marchi <simon.marchi@ericsson.com>
* lib/mi-support.exp (mi_run_cmd_full): Add comments.
The other part of PR gdb/13860 is about console execution commands in
MI getting their output half lost. E.g., take the finish command,
executed on a frontend's GDB console:
sync:
finish
&"finish\n"
~"Run till exit from #0 usleep (useconds=10) at ../sysdeps/unix/sysv/linux/usleep.c:27\n"
^running
*running,thread-id="1"
(gdb)
~"0x00000000004004d7 in foo () at stepinf.c:6\n"
~"6\t usleep (10);\n"
~"Value returned is $1 = 0\n"
*stopped,reason="function-finished",frame={addr="0x00000000004004d7",func="foo",args=[],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="6"},thread-id="1",stopped-threads="all",core="1"
async:
finish
&"finish\n"
~"Run till exit from #0 usleep (useconds=10) at ../sysdeps/unix/sysv/linux/usleep.c:27\n"
^running
*running,thread-id="1"
(gdb)
*stopped,reason="function-finished",frame={addr="0x00000000004004d7",func="foo",args=[],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="6"},gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0"
Note how all the "Value returned" etc. output is missing in async mode.
The same happens with e.g., catchpoints:
=breakpoint-modified,bkpt={number="1",type="catchpoint",disp="keep",enabled="y",what="22016",times="1"}
~"\nCatchpoint "
~"1 (forked process 22016), 0x0000003791cbd8a6 in __libc_fork () at ../nptl/sysdeps/unix/sysv/linux/fork.c:131\n"
~"131\t pid = ARCH_FORK ();\n"
*stopped,reason="fork",disp="keep",bkptno="1",newpid="22016",frame={addr="0x0000003791cbd8a6",func="__libc_fork",args=[],file="../nptl/sysdeps/unix/sysv/linux/fork.c",fullname="/usr/src/debug/glibc-2.14-394-g8f3b1ff/nptl/sysdeps/unix/sysv/linux/fork.c",line="131"},thread-id="1",stopped-threads="all",core="0"
where all those ~ lines are missing in async mode, or just the "step"
current line indication:
s
&"s\n"
^running
*running,thread-id="all"
(gdb)
~"13\t foo ();\n"
*stopped,frame={addr="0x00000000004004ef",func="main",args=[{name="argc",value="1"},{name="argv",value="0x7fffffffdd78"}],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="13"},thread-id="1",stopped-threads="all",core="3"
(gdb)
Or in the case of the PRs example, the "Stopped due to shared library
event" note:
start
&"start\n"
~"Temporary breakpoint 1 at 0x400608: file ../../../src/gdb/testsuite/gdb.mi/solib-main.c, line 21.\n"
=breakpoint-created,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x0000000000400608",func="main",file="../../../src/gdb/testsuite/gdb.mi/solib-main.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/solib-main.c",line="21",times="0",original-location="main"}
~"Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/solib-main \n"
=thread-group-started,id="i1",pid="21990"
=thread-created,id="1",group-id="i1"
^running
*running,thread-id="all"
(gdb)
=library-loaded,id="/lib64/ld-linux-x86-64.so.2",target-name="/lib64/ld-linux-x86-64.so.2",host-name="/lib64/ld-linux-x86-64.so.2",symbols-loaded="0",thread-group="i1"
~"Stopped due to shared library event (no libraries added or removed)\n"
*stopped,reason="solib-event",thread-id="1",stopped-threads="all",core="3"
(gdb)
IMO, if you're typing execution commands in a frontend's console, you
expect to see their output. Indeed it's what you get in sync mode. I
think async mode should do the same. Deciding what to mirror to the
console wrt to breakpoints and random stops gets messy real fast.
E.g., say "s" trips on a breakpoint. We'd clearly want to mirror the
event to the console in this case. But what about more complicated
cases like "s&; thread n; s&", and one of those steps spawning a new
thread, and that thread hitting a breakpoint? It's impossible in
general to track whether the thread had any relation to the commands
that had been executed. So I think we should just simplify and always
mirror breakpoints and random events to the console.
Notes:
- mi->out is the same as gdb_stdout when MI is the current
interpreter. I think that referring to that directly is cleaner.
An earlier revision of this patch made the changes that are now
done in mi_on_normal_stop directly in infrun.c:normal_stop, and so
not having an obvious place to put the new uiout by then, and not
wanting to abuse CLI's uiout, I made a temporary uiout when
necessary.
- Hopefuly the rest of the patch is more or less obvious given the
comments added.
Tested on x86_64 Fedora 20, no regressions.
2014-05-21 Pedro Alves <palves@redhat.com>
PR gdb/13860
* gdbthread.h (struct thread_control_state): New field
`command_interp'.
* infrun.c (follow_fork): Copy the new thread control field to the
child fork thread.
(clear_proceed_status_thread): Clear the new thread control field.
(proceed): Set the new thread control field.
* interps.h (command_interp): Declare.
* interps.c (command_interpreter): New global.
(command_interp): New function.
(interp_exec): Set `command_interpreter' while here.
* cli-out.c (cli_uiout_dtor): New function.
(cli_ui_out_impl): Install it.
* mi/mi-interp.c: Include cli-out.h.
(mi_cmd_interpreter_exec): Add comment.
(restore_current_uiout_cleanup): New function.
(ui_out_free_cleanup): New function.
(mi_on_normal_stop): If finishing an execution command started by
a CLI command, or any kind of breakpoint-like event triggered,
print the stop event to the output (CLI) stream.
* mi/mi-out.c (mi_ui_out_impl): Install NULL `dtor' handler.
2014-05-21 Pedro Alves <palves@redhat.com>
PR gdb/13860
* gdb.mi/mi-cli.exp (line_callee4_next_step): New global.
(top level): Test that output related to execution commands is
sent to the console with CLI commands, but not with MI commands.
Test that breakpoint events are always mirrored to the console.
Also expect the new source line to be output after a "next" in
async mode too. Make it a pass/fail test.
* gdb.mi/mi-solib.exp: Test that the CLI solib event note is
output.
* lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.
This reverts commit 8c217a4b68.
Following this
https://sourceware.org/ml/gdb-patches/2014-05/msg00462.html
I suggest reverting my previous commit. I will follow with another
patch to add comments, to clarify some things as stated in the mail
thread.
I ran make check with on gdb.mi, and the test that the commit broke
passes again.
gdb/testsuite/ChangeLog:
2014-05-21 Simon Marchi <simon.marchi@ericsson.com>
* lib/mi-support.exp (mi_run_cmd_full): Revert to original
behavior for $args, pass it directly to "run".
This fixes:
PASS: gdb.base/info-macros.exp: info macro -a -- FOO
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/info-macros.exp: info macros 2
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/info-macros.exp: info macros 3
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/info-macros.exp: info macros 4
FAIL: gdb.base/info-macros.exp: info macros *$pc
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/info-macros.exp: next
FAIL: gdb.base/info-macros.exp: info macros
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/info-macros.exp: next
FAIL: gdb.base/info-macros.exp: info macros 6
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/info-macros.exp: next
FAIL: gdb.base/info-macros.exp: info macros 7
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/info-macros.exp: info macros info-macros.c:42 (PRMS
gdb/NNNN)
with the arm-eabi target tested on the i686-mingw32 host where GCC
defines enough macros to exhaust expect's 30000 characters of buffer
space.
* lib/gdb.exp (default_gdb_init): Bump `match_max' up from
30000 to 65536.
Hi,
This patch is to add a new board setting gdb_reverse_timeout, which is
used to set timeout for all gdb.reverse test cases, which are usually
very slow and cause some TIMEOUT failures, for example, on some arm
boards. We have some alternatives to this approach, but I am not
satisfied with them:
- Increase the timeout value. This is the global change, and it may
cause some delay where actual failures happen.
- Set timeout by gdb_reverse_timeout in every gdb.reverse/*.exp.
Then, we have to touch every file under gdb.reverse.
In this patch, we choose a central place to set timeout for all tests
in gdb.reverse, which is convenient.
gdb/testsuite:
2014-05-20 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (gdb_init): Set timeout if test file is under
gdb.reverse directory and gdb_reverse_timeout exists in board
setting.
* README: Document gdb_reverse_timeout.
The argument ARGS of gdb_init is passed from dejagnu is a string, the
test file name. In dejagnu/runtest.exp:
proc runtest { test_file_name } {
....
....
if [info exists tool] {
if { [info procs "${tool}_init"] != "" } {
${tool}_init $test_file_name;
}
}
....
}
but inn default_gdb_init (callee of gdb_init), we have
set gdb_test_file_name [file rootname [file tail [lindex $args 0]]]
In tcl, all actual arguments are combined to a list and assigned to
args. This code here isn't wrong, but unnecessary, because its caller
(proc runtest) only passes one string to it, and IMO, we don't need
such tricky tcl "args".
I doubt that "[lindex $args 0]" is to be backward compatible with old
dejagnu, but dejagnu-1.4 release started to pass $test_file_name to
${too}_init, as I showed above. dejagnu-1.4 was released in 2001, and
it should be old enough. I also tried to check whether gdb testusite
works with dejagnu-1.3 or not, but failed to build dejagnu-1.3 on my
machine. Supposing GDB testsuite requires at least dejagnu-1.4, this
change should be safe.
This patch is update default_gdb_init to treat ARGS as a string instead
of a list. Then, 'args' sounds like a list, and this patch also renames
it by 'test_file_name', to align with dejagnu.
gdb/testsuite:
2014-05-20 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (default_gdb_init): Rename argument 'args' by
'test_file_name'. Treat args as a string instead of a list.
(gdb_init): Rename argument 'args' by 'test_file_name'.
gdb/testsuite/
2014-05-16 Pedro Alves <palves@redhat.com>
* lib/mi-support.exp (mi_expect_stop): On timeout, say "timeout"
instead of "unknown output after running".
