Repeat `PIC and non-PIC test 1' checks for microMIPS LA25 stubs,
covering code generation and stub symbol annotation.
ld/
* testsuite/ld-mips-elf/pic-and-nonpic-1-micromips-rel.dd: New
test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-micromips-rel.nd: New
test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-micromips.dd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-micromips.nd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1a-micromips.s: New test
source.
* testsuite/ld-mips-elf/pic-and-nonpic-1b-micromips.s: New test
source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
For the case where a function which requires an LA25 stub is at the
beginning of a section we use a short sequence comprised of a LUI/ADDIU
instruction pair only and prepended to the associated function rather
than using a trailing jump to reach the function. This works by
checking for the offset into section of the function symbol being 0.
This is however never the case for microMIPS function symbols, which
have the ISA bit set. Consequently the short LA25 sequence is never
produced for microMIPS functions, like with the following example:
$ cat la25a.s
.abicalls
.global f1
.ent f1
f1:
.set noreorder
.cpload $25
.set reorder
.option pic0
jal f2
.option pic2
jr $31
.end f1
.global f2
.ent f2
f2:
jr $31
.end f2
$ cat la25b.s
.abicalls
.option pic0
.global __start
.ent __start
__start:
jal f1
jal f2
.end __start
$ as -mmicromips -32 -EB -o la25a.o la25a.s
$ as -mmicromips -32 -EB -o la25b.o la25b.s
$ ld -melf32btsmip -o la25 la25a.o la25b.o
$ objdump -d la25
la25: file format elf32-tradbigmips
Disassembly of section .text:
004000d0 <.pic.f2>:
4000d0: 41b9 0040 lui t9,0x40
4000d4: d420 0083 j 400106 <f2>
4000d8: 3339 0107 addiu t9,t9,263
4000dc: 0000 0000 nop
004000e0 <.pic.f1>:
4000e0: 41b9 0040 lui t9,0x40
4000e4: d420 0078 j 4000f0 <f1>
4000e8: 3339 00f1 addiu t9,t9,241
4000ec: 0000 0000 nop
004000f0 <f1>:
4000f0: 41bc 0002 lui gp,0x2
4000f4: 339c 801f addiu gp,gp,-32737
4000f8: 033c e150 addu gp,gp,t9
4000fc: f420 0083 jal 400106 <f2>
400100: 0000 0000 nop
400104: 45bf jrc ra
00400106 <f2>:
400106: 45bf jrc ra
...
00400110 <__start>:
400110: f420 0070 jal 4000e0 <.pic.f1>
400114: 0000 0000 nop
400118: f420 0068 jal 4000d0 <.pic.f2>
40011c: 0000 0000 nop
$
where `.pic.f1' could omit the trailing jump and the filler NOP and just
fall through to `f1'.
Correct the problem by masking out the ISA bit from microMIPS functions,
which fixes the earlier example:
$ objdump -d la25
la25: file format elf32-tradbigmips
Disassembly of section .text:
004000d0 <.pic.f2>:
4000d0: 41b9 0040 lui t9,0x40
4000d4: d420 0083 j 400106 <f2>
4000d8: 3339 0107 addiu t9,t9,263
...
004000e8 <.pic.f1>:
4000e8: 41b9 0040 lui t9,0x40
4000ec: 3339 00f1 addiu t9,t9,241
004000f0 <f1>:
4000f0: 41bc 0002 lui gp,0x2
4000f4: 339c 801f addiu gp,gp,-32737
4000f8: 033c e150 addu gp,gp,t9
4000fc: f420 0083 jal 400106 <f2>
400100: 0000 0000 nop
400104: 45bf jrc ra
00400106 <f2>:
400106: 45bf jrc ra
...
00400110 <__start>:
400110: f420 0074 jal 4000e8 <.pic.f1>
400114: 0000 0000 nop
400118: f420 0068 jal 4000d0 <.pic.f2>
40011c: 0000 0000 nop
$
There is no need to do anything for MIPS16 functions, because if any
LA25 stub has been generated for such a function, then it is only
required for an associated call thunk only, which is regular MIPS code
and the address of which, with the ISA bit clear, is returned by
`mips_elf_get_la25_target'.
This problem has been there since the beginning of microMIPS support:
commit df58fc944d
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Sun Jul 24 14:20:15 2011 +0000
<https://sourceware.org/ml/binutils/2011-07/msg00198.html>, ("MIPS:
microMIPS ASE support").
bfd/
* elfxx-mips.c (mips_elf_add_la25_stub): Clear the ISA bit of
the stub address retrieved if associated with a microMIPS
function.
Fix a problem with missing microMIPS symbol annotation with microMIPS
LA25 stub symbols. The consequence of the issue is these symbols appear
in the symbol table as regular MIPS symbols with the ISA bit set, as
shown with the example below:
$ cat la25a.s
.abicalls
.global f1
.ent f1
f1:
.set noreorder
.cpload $25
.set reorder
.option pic0
jal f2
.option pic2
jr $31
.end f1
.global f2
.ent f2
f2:
jr $31
.end f2
$ cat la25b.s
.abicalls
.option pic0
.global __start
.ent __start
__start:
jal f1
jal f2
.end __start
$ as -mmicromips -32 -EB -o la25a.o la25a.s
$ as -mmicromips -32 -EB -o la25b.o la25b.s
$ ld -melf32btsmip -o la25 la25a.o la25b.o
$ readelf -s la25
Symbol table '.symtab' contains 18 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00400098 0 SECTION LOCAL DEFAULT 1
2: 004000b0 0 SECTION LOCAL DEFAULT 2
3: 004000d0 0 SECTION LOCAL DEFAULT 3
4: 00000000 0 SECTION LOCAL DEFAULT 4
5: 00000000 0 SECTION LOCAL DEFAULT 5
6: 00418110 0 NOTYPE LOCAL DEFAULT 3 _gp
7: 004000e1 16 FUNC LOCAL DEFAULT 3 .pic.f1
8: 004000d1 16 FUNC LOCAL DEFAULT 3 .pic.f2
9: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _fdata
10: 00400110 16 FUNC GLOBAL DEFAULT [MICROMIPS] 3 __start
11: 00400106 2 FUNC GLOBAL DEFAULT [MICROMIPS] 3 f2
12: 004000d0 0 NOTYPE GLOBAL DEFAULT 3 _ftext
13: 00410120 0 NOTYPE GLOBAL DEFAULT 3 __bss_start
14: 004000f0 22 FUNC GLOBAL DEFAULT [MICROMIPS] 3 f1
15: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _edata
16: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _end
17: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _fbss
$
where microMIPS annotation is missing for `.pic.f1' and `.pic.f2' even
though these stubs are associated with microMIPS functions `f1' and `f2'
respectively.
Add the missing annotation then, by copying it from the function symbol
an LA25 stub is associated with, correcting the example above:
$ readelf -s la25
Symbol table '.symtab' contains 18 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00400098 0 SECTION LOCAL DEFAULT 1
2: 004000b0 0 SECTION LOCAL DEFAULT 2
3: 004000d0 0 SECTION LOCAL DEFAULT 3
4: 00000000 0 SECTION LOCAL DEFAULT 4
5: 00000000 0 SECTION LOCAL DEFAULT 5
6: 00418110 0 NOTYPE LOCAL DEFAULT 3 _gp
7: 004000e0 16 FUNC LOCAL DEFAULT [MICROMIPS] 3 .pic.f1
8: 004000d0 16 FUNC LOCAL DEFAULT [MICROMIPS] 3 .pic.f2
9: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _fdata
10: 00400110 16 FUNC GLOBAL DEFAULT [MICROMIPS] 3 __start
11: 00400106 2 FUNC GLOBAL DEFAULT [MICROMIPS] 3 f2
12: 004000d0 0 NOTYPE GLOBAL DEFAULT 3 _ftext
13: 00410120 0 NOTYPE GLOBAL DEFAULT 3 __bss_start
14: 004000f0 22 FUNC GLOBAL DEFAULT [MICROMIPS] 3 f1
15: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _edata
16: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _end
17: 00410120 0 NOTYPE GLOBAL DEFAULT 3 _fbss
$
This problem has been there since the beginning of microMIPS support:
commit df58fc944d
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Sun Jul 24 14:20:15 2011 +0000
<https://sourceware.org/ml/binutils/2011-07/msg00198.html>, ("MIPS:
microMIPS ASE support").
bfd/
* elfxx-mips.c (mips_elf_create_stub_symbol): For a microMIPS
stub also add STO_MICROMIPS annotation.
Fix a linker regression introduced with commit 9d862524f6 ("MIPS:
Verify the ISA mode and alignment of branch and jump targets") causing a
build failure in microMIPS glibc where the `zdump' tool fails to link:
.../timezone/zdump.o: In function `yeartot':
.../timezone/zdump.c:758:(.text+0x62): Jump to a non-instruction-aligned address
.../timezone/zdump.c:758:(.text+0x76): Jump to a non-instruction-aligned address
.../timezone/zdump.c:768:(.text+0x112): Jump to a non-instruction-aligned address
.../timezone/zdump.c:774:(.text+0x1b8): Jump to a non-instruction-aligned address
.../timezone/zdump.c:774:(.text+0x1cc): Jump to a non-instruction-aligned address
collect2: error: ld returned 1 exit status
make[2]: *** [.../timezone/zdump] Error 1
The cause of the failure is the stricter check introduced with the said
change for jump and branch targets tripping on the address of microMIPS
LA25 stubs. Despite being microMIPS code these stubs do not have the
ISA bit set throughout the relocation calculation process, because they
have their address set to the memory offset into the stub section they
are placed in.
The `mips_elf_la25_stub' structure does not carry ISA mode information,
but there is no need to extend it, because the ISA mode can be inferred
from the original symbol, which will have STO_MICROMIPS annotation, so
use that instead to set the ISA bit appropriately. Also only LA25 stubs
associated with microMIPS symbols need to have the ISA bit set, because
other LA25 stubs are made with regular MIPS code, even if associated
with a MIPS16 symbol (in which case they are needed by a call thunk only
rather than the MIPS16 function proper).
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): Set the ISA bit
in microMIPS LA25 stub references.
This is done by catching an exception number 0x406d1388 (it has no
documented name, though MSDN dubs it "MS_VC_EXCEPTION" in one code
example), which is thrown by the program. The exception record
contains an ID of a thread and a name to give it.
This requires rolling back some changes in handle_exception(), which
now again returns more than two distinct values. The new
HANDLE_EXCEPTION_IGNORED value means that gdb should just continue,
without returning the thread ID up the stack (which would result in
further handling of the exception, which is not what we want).
gdb/ChangeLog:
2016-08-10 Руслан Ижбулатов <lrn1986@gmail.com>
Pedro Alves <palves@redhat.com>
* windows-nat.c (MS_VC_EXCEPTION): New define.
(handle_exception_result): New enum.
(windows_delete_thread): Free the thread's name.
(handle_exception): Handle MS_VC_EXCEPTION.
(get_windows_debug_event): Handle HANDLE_EXCEPTION_IGNORED.
(windows_thread_name): New function.
(windows_target): Install it as to_thread_name method.
* NEWS: Mention the thread naming support on MS-Windows.
With some versions of gas, the call to tls_get_addr uses a GOTPCREL
relocation instead of a GOTPCRELX relocation. We should allow for that
when skip_call_tls_get_addr_ is true. We should also build the test
objects with the in-tree assembler.
This patch also fixes some cascading error messages caused by not
resetting the skip_call_tls_get_addr_ flag after printing the error.
gold/
PR gold/20216
* x86_64.cc (Target_x86_64::Relocate::relocate): Add check for
R_X86_64_GOTPCREL. Reset skip_call_tls_get_addr_ after printing
error message.
* testsuite/Makefile.am (pr20216_gd.o): Add -Bgcctestdir/.
(pr20216_ld.o): Likewise.
* testsuite/Makefile.in: Regenerate.
2016-08-10 James Clarke <jrtc27@jrtc27.com>
gold/
PR gold/20443
* symtab.cc (Symbol_table::add_from_relobj): Handle NULL symbols,
which will be present for STT_SPARC_REGISTER.
(Symbol_table::add_from_pluginobj): Likewise.
(Symbol_table::add_from_dynobj): Likewise.
(Symbol_table::add_from_incrobj): Removed dead code.
The fall-through in Target_sparc::Relocate::relocate for
R_SPARC_GOTDATA_OP_LOX10 is currently R_SPARC_GOT13, but should
clearly be R_SPARC_GOT10. GCC has been seen to emit a sethi/xor
rather than a sethi/or sequence to load a 32-bit immediate, but
if R_SPARC_GOT13 is used then bits 10-12 get zeroed out as both
the sethi and xor immediates contain them.
gold/
PR gold/20442
* sparc.cc (Target_sparc::Relocate::relocate): R_SPARC_GOTDATA_OP_LOX10
should fall back on R_SPARC_GOT10, not R_SPARC_GOT13.
The ARI complains about this new file:
common/signals-state-save-restore.c:46: warning: gettext: All messages should be marked up with _.
common/signals-state-save-restore.c:59: warning: gettext: All messages should be marked up with _.
common/signals-state-save-restore.c:87: warning: gettext: All messages should be marked up with _.
common/signals-state-save-restore.c:92: warning: gettext: All messages should be marked up with _.
Since these are untranslatable strings, use () instead of _().
gdb/ChangeLog:
2016-08-10 Pedro Alves <palves@redhat.com>
* common/signals-state-save-restore.c
(save_original_signals_state, restore_original_signals_state):
Wrap perror_with_name arguments with '()'.
Don't run LTO tests if compiler is configured with --disable-plugin.
PR ld/20436
* testsuite/lib/ld-lib.exp (check_gcc_plugin_enabled): New
proc.
(check_lto_available): Return 0 if check_gcc_plugin_enabled
returns 0.
(check_lto_fat_available): Likewise.
(check_lto_shared_available): Likewise.
When executing commands on a secondary UI running the MI interpreter,
some commands that should be synchronous are not. MI incorrectly
continues processing input right after the synchronous command is
sent, before the target stops.
The problem happens when we emit MI async events (=library-loaded,
etc.), and we go about restoring the previous terminal state, we end
up calling target_terminal_ours, which incorrectly always installs the
current UI's input_fd in the event loop... That is, code like this:
old_chain = make_cleanup_restore_target_terminal ();
target_terminal_ours_for_output ();
fprintf_unfiltered (mi->event_channel, "library-loaded");
...
do_cleanups (old_chain);
The fix is to move the add_file_handler/delete_file_handler calls out
of target_terminal_$foo, making these completely no-ops unless called
with the main UI as current UI.
gdb/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/20418
* event-top.c (ui_register_input_event_handler)
(ui_unregister_input_event_handler): New functions.
(async_enable_stdin): Register input in the event loop.
(async_disable_stdin): Unregister input from the event loop.
(gdb_setup_readline): Register input in the event loop.
* infrun.c (check_curr_ui_sync_execution_done): Register input in
the event loop.
* target.c (target_terminal_inferior): Don't unregister input from
the event loop.
(target_terminal_ours): Don't register input in the event loop.
* target.h (target_terminal_inferior)
(target_terminal_ours_for_output, target_terminal_ours): Update
comments.
* top.h (ui_register_input_event_handler)
(ui_unregister_input_event_handler): New declarations.
* utils.c (ui_unregister_input_event_handler_cleanup)
(prepare_to_handle_input): New functions.
(defaulted_query, prompt_for_continue): Use
prepare_to_handle_input.
gdb/testsuite/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
Simon Marchi <simon.marchi@ericsson.com>
PR gdb/20418
* gdb.mi/new-ui-mi-sync.c, gdb.mi/new-ui-mi-sync.exp: New files.
* lib/mi-support.exp (mi_expect_interrupt): Remove anchors.
gdb 7.11 introduced an MI regression: a failing MI sync execution
command misses printing the MI prompt, and then all subsequent command
miss it too:
$ gdb-7.11.1 -i=mi
[...]
p 1
&"p 1\n"
~"$1 = 1"
~"\n"
^done
(gdb) <<< prompted ok
-exec-continue
^error,msg="The program is not being run." <<< missing prompt after this
print 1
&"print 1\n"
~"$2 = 1"
~"\n"
^done <<< missing prompt after this
gdb 7.10.1 behaved correctly, even with "set mi-async on":
-exec-continue
^error,msg="The program is not being run."
(gdb) <<< prompted ok
etc.
Bisecting points at:
commit 0b333c5e7d
Author: Pedro Alves <palves@redhat.com>
Date: Wed Sep 9 18:23:23 2015 +0100
Merge async and sync code paths some more
[...]
The problem is that when an exception is thrown, we leave the prompt
state set to PROMPT_BLOCKED, and then mi_execute_command_input_handler
doesn't print the prompt. It used to work because before that patch,
we happened to skip disabling stdin if the current target didn't do
async (which it never does before execution).
I was surprised to find that this bug isn't caught by the testsuite,
so I made a thorough test that tests all combinations of pairs of:
- a failing synchronous execution command
- a failing non-execution command
- a non-failing command
gdb/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR mi/20431
* mi/mi-main.c (mi_execute_command): Enable input and set prompt
state to PROMPT_NEEDED.
gdb/testsuite/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR mi/20431
* gdb.mi/mi-cmd-error.exp: New file.
gdb's (or gdbserver's) own signal handling should not interfere with
the signal dispositions their spawned children inherit. However, it
currently does. For example, some paths in gdb cause SIGPIPE to be
set to SIG_IGN, and as consequence, the child starts with SIGPIPE to
set to SIG_IGN too, even though gdb was started with SIGPIPE set to
SIG_DFL.
This is because the exec family of functions does not reset the signal
disposition of signals that are set to SIG_IGN:
http://pubs.opengroup.org/onlinepubs/7908799/xsh/execve.html
Signals set to the default action (SIG_DFL) in the calling process
image are set to the default action in the new process
image. Signals set to be ignored (SIG_IGN) by the calling process
image are set to be ignored by the new process image. Signals set to
be caught by the calling process image are set to the default action
in the new process image (see <signal.h>).
And neither does it reset signal masks or flags.
In order to be transparent, when spawning new child processes to debug
(with "run", etc.), reset signal actions and mask back to what was
originally inherited from gdb/gdbserver's parent, just before execing
the target program to debug.
gdb/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (SFILES): Add
common/signals-state-save-restore.c.
(HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h.
(COMMON_OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* configure: Regenerate.
* fork-child.c: Include "signals-state-save-restore.h".
(fork_inferior): Call restore_original_signals_state.
* main.c: Include "signals-state-save-restore.h".
(captured_main): Call save_original_signals_state.
* common/common.m4: Add sigaction to AC_CHECK_FUNCS checks.
* common/signals-state-save-restore.c: New file.
* common/signals-state-save-restore.h: New file.
gdb/gdbserver/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* config.in: Regenerate.
* configure: Regenerate.
* linux-low.c: Include "signals-state-save-restore.h".
(linux_create_inferior): Call
restore_original_signals_state.
* server.c: Include "dispositions-save-restore.h".
(captured_main): Call save_original_signals_state.
gdb/testsuite/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* gdb.base/signals-state-child.c: New file.
* gdb.base/signals-state-child.exp: New file.
* gdb.gdb/selftest.exp (do_steps_and_nexts): Add new pattern.
With something like:
struct A { int bitfield:4; } var;
If 'var' ends up wholly-optimized out, printing 'var.bitfield' crashes
gdb here:
(top-gdb) bt
#0 0x000000000058b89f in extract_unsigned_integer (addr=0x2 <error: Cannot access memory at address 0x2>, len=2, byte_order=BFD_ENDIAN_LITTLE)
at /home/pedro/gdb/mygit/src/gdb/findvar.c:109
#1 0x00000000005a187a in unpack_bits_as_long (field_type=0x16cff70, valaddr=0x0, bitpos=16, bitsize=12) at /home/pedro/gdb/mygit/src/gdb/value.c:3347
#2 0x00000000005a1b9d in unpack_value_bitfield (dest_val=0x1b5d9d0, bitpos=16, bitsize=12, valaddr=0x0, embedded_offset=0, val=0x1b5d8d0)
at /home/pedro/gdb/mygit/src/gdb/value.c:3441
#3 0x00000000005a2a5f in value_fetch_lazy (val=0x1b5d9d0) at /home/pedro/gdb/mygit/src/gdb/value.c:3958
#4 0x00000000005a10a7 in value_primitive_field (arg1=0x1b5d8d0, offset=0, fieldno=0, arg_type=0x16d04c0) at /home/pedro/gdb/mygit/src/gdb/value.c:3161
#5 0x00000000005b01e5 in do_search_struct_field (name=0x1727c60 "bitfield", arg1=0x1b5d8d0, offset=0, type=0x16d04c0, looking_for_baseclass=0, result_ptr=0x7fffffffcaf8,
[...]
unpack_value_bitfield is already optimized-out/unavailable -aware:
(...) VALADDR points to the contents of VAL. If the VAL's contents
required to extract the bitfield from are unavailable/optimized
out, DEST_VAL is correspondingly marked unavailable/optimized out.
however, it is not considering the case of the value having no
contents buffer at all, as can happen through
allocate_optimized_out_value.
gdb/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
* value.c (unpack_value_bitfield): Skip unpacking if the parent
has no contents buffer to begin with.
gdb/testsuite/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/bitfield-parent-optimized-out.exp: New file.
I regenerated all target description .c files from scratch, and got
this spurious diff.
It's a simple mid-air collision - these files were clearly generated
before commit 73b4f516a0 ("maint_print_c_tdesc_cmd: Use type for
TYPE_CODE_FLAGS instead of field_type."), which did the global
s/field_type/type/, and pushed to master afterwards.
gdb/features/ChangeLog:
2016-08-08 Pedro Alves <palves@redhat.com>
* features/i386/amd64-avx-mpx-linux.c: Regenerate.
* features/i386/amd64-avx-mpx.c: Regenerate.
* features/i386/i386-avx-mpx-linux.c: Regenerate.
* features/i386/i386-avx-mpx.c: Regenerate.
PR binutils/20440
* dwarf.c (display_debug_lines_decoded): Add checks for running
off the end of the section when populating the directory table and
file table.
(frame_display_row): Set max_regs equal to ncols.
(load_specific_debug_section): If the section is compressed, but
it is not big enough to hold a compression header then warn and
return 0.
* doc/chew.c (delete_string): Only free the string buffer if it is
there. Mark the buffer as NULL after freeing.
(drop): Free the dropped string.
(free_words): New function: Frees the memory allocated to the
dictionary.
(add_instrinsic): Duplicate the name string, so that it can be
freed later on.
(compile): Free unused words.
(main): Free the dictionary and top level string buffers at the
end.
We build by default with a C++ compiler, but "configure --help" still
says "--enable-build-with-cxx", which hints that it is by default
disabled. Update the --help text.
gdb/ChangeLog:
2016-08-05 Pedro Alves <palves@redhat.com>
* build-with-cxx.m4: Change help string to be in terms of
--disable-build-with-cxx.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-08-05 Pedro Alves <palves@redhat.com>
* configure: Regenerate.
PR gas/20429
* config/tc-arm.c (do_vfp_nsyn_push): Check that no more than 16
registers are pushed.
(do_vfp_nsyn_pop): Check that no more than 16 registers are
popped.
* testsuite/gas/arm/pr20429.s: New test.
* testsuite/gas/arm/pr20429.d: New test driver.
* testsuite/gas/arm/pr20429.1: Expected error output.
PR gas/20364
* config/tc-aarch64.c (s_ltorg): Change the mapping state after
aligning the frag.
(aarch64_init): Treat rs_align frags in code sections as
containing code, not data.
* testsuite/gas/aarch64/pr20364.s: New test.
* testsuite/gas/aarch64/pr20364.d: New test driver.
bfd/
* elf32-arm.c (CMSE_PREFIX): Define macro.
(elf32_arm_stub_cmse_branch_thumb_only): Define stub sequence.
(cmse_branch_thumb_only): Declare stub.
(struct elf32_arm_link_hash_table): Define cmse_stub_sec field.
(elf32_arm_get_plt_info): Add globals parameter. Use it to return
FALSE if there is no PLT.
(arm_type_of_stub): Adapt to new elf32_arm_get_plt_info signature.
(elf32_arm_final_link_relocate): Likewise.
(elf32_arm_gc_sweep_hook): Likewise.
(elf32_arm_gc_mark_extra_sections): Mark sections holding ARMv8-M
secure entry functions.
(arm_stub_is_thumb): Add case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required): Change to a switch case
and add a case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required_alignment): Likewise.
(arm_stub_dedicated_output_section_name): Likewise.
(arm_stub_dedicated_input_section_ptr): Likewise and remove
ATTRIBUTE_UNUSED for htab parameter.
(arm_stub_required_alignment): Likewise.
(arm_stub_sym_claimed): Likewise.
(arm_dedicated_stub_section_padding): Likewise.
(cmse_scan): New function.
(elf32_arm_size_stubs): Call cmse_scan for ARM M profile targets.
Set stub_changed to TRUE if such veneers were created.
(elf32_arm_swap_symbol_in): Add detection code for CMSE special
symbols.
include/
* arm.h (ARM_GET_SYM_CMSE_SPCL): Define macro.
(ARM_SET_SYM_CMSE_SPCL): Likewise.
ld/
* ld.texinfo (Placement of SG veneers): New concept entry.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway veneers: no .gnu.sgstubs section): New test.
(Secure gateway veneers: wrong entry functions): Likewise.
(Secure gateway veneers (ARMv8-M Baseline)): Likewise.
(Secure gateway veneers (ARMv8-M Mainline)): Likewise.
* testsuite/ld-arm/cmse-veneers.s: New file.
* testsuite/ld-arm/cmse-veneers.d: Likewise.
* testsuite/ld-arm/cmse-veneers.rd: Likewise.
* testsuite/ld-arm/cmse-veneers.sd: Likewise.
* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out: Likewise.
* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out: Likewise.
I find the following test fail when I test native aarch64 gdb with
arm program,
(gdb) PASS: gdb.base/attach-pie-noexec.exp: attach
set architecture arm^M
warning: Selected architecture arm is not compatible with reported target architecture aarch64^M
Architecture `arm' not recognized.^M
The target architecture is set automatically (currently aarch64)^M
(gdb) FAIL: gdb.base/attach-pie-noexec.exp: set architecture arm
GDB thinks the target is aarch64, but it isn't. Nowadays, we are
using some entries AT_PHENT and AT_HWCAP in auxv to determine whether
the process is a 32-bit arm one or 64-bit aarch64 one, and get the
right gdbarch. However, in the process of parsing auxv (in
inf_ptrace_auxv_parse), the size of int and data pointer of
target_gdbarch is used. If debug program exists (in most of cases),
target_gdbarch is already set according to the debug program, which
is arm in my case. Then, GDB can parse auxv successfully. However,
in gdb.base/attach-pie-noexec.exp, the debug program is removed,
target_gdbarch is aarch64 when GDB parse auxv, so GDB can't parse
it successfully.
Instead of using auxv, we check the return value of ptrace NT_ARM_VFP.
If the program is an arm process, NT_ARM_VFP is OK, otherwise, error
is returned.
Additionally, we only return tdesc_arm_with_neon for arm process,
because neon is mandatory on ARMv8.
gdb:
2016-08-04 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (tdesc_arm_with_vfpv3): Remove the
declaration.
(aarch64_linux_read_description): Remove code on getting
auxv and select target description on it. Select target
description by the result of NT_ARM_VFP ptrace request.
When I run process-dies-while-detaching.exp with GDBserver, I see many
warnings printed by GDBserver,
ptrace(regsets_fetch_inferior_registers) PID=26183: No such process
ptrace(regsets_fetch_inferior_registers) PID=26183: No such process
ptrace(regsets_fetch_inferior_registers) PID=26184: No such process
ptrace(regsets_fetch_inferior_registers) PID=26184: No such process
regsets_fetch_inferior_registers is called when GDBserver resumes each
lwp.
#2 0x0000000000428260 in regsets_fetch_inferior_registers (regsets_info=0x4690d0 <aarch64_regsets_info>, regcache=0x31832020)
at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:5412
#3 0x00000000004070e8 in get_thread_regcache (thread=0x31832940, fetch=fetch@entry=1) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/regcache.c:58
#4 0x0000000000429c40 in linux_resume_one_lwp_throw (info=<optimized out>, signal=0, step=0, lwp=0x31832830)
at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4463
#5 linux_resume_one_lwp (lwp=0x31832830, step=<optimized out>, signal=<optimized out>, info=<optimized out>)
at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4573
The is the case that threads are disappeared when GDB/GDBserver resumes
them. We check errno for ESRCH, and don't print error messages, like
what we are doing in regsets_store_inferior_registers.
gdb/gdbserver:
2016-08-04 Yao Qi <yao.qi@linaro.org>
* linux-low.c (regsets_fetch_inferior_registers): Check
errno is ESRCH or not.
PR python/18565 notes that calling frame filters don't work properly for
inlined functions. This happens because Frame.function on an inline
frame will yield the wrong result. This patch changes this code to use
find_frame_funname instead, which handles inline frames properly.
Built and regtested on x86-64 Fedora 24.
2016-08-03 Tom Tromey <tom@tromey.com>
PR python/18565:
* python/py-frame.c (frapy_function): Use find_frame_funname.
2016-08-03 Tom Tromey <tom@tromey.com>
PR python/18565:
* gdb.python/py-frame-inline.exp: Add Frame.function test.
The PR 18565 thread pointed out that, if cp_remove_params can throw
(we aren't quite sure), then find_frame_funname could leak some
memory. This patch avoids any potential issue by rearranging some
code in find_frame_funname.
Built and regtested on x86-64 Fedora 24.
2016-08-03 Tom Tromey <tom@tromey.com>
* stack.c (find_frame_funname): Avoid any possible leak in case
cp_remove_params can throw.
An earlier patch added three new breakpoint-related events to the
Python API. However, at that time, I forgot to update NEWS. This
patch supplies the missing entry.
2016-08-03 Tom Tromey <tom@tromey.com>
* NEWS: Mention new Python breakpoint events.
A while ago, Pedro announced that I would be the Rust maintainer for
gdb. However, I neglected to update the MAINTAINERS file until now.
2016-08-02 Tom Tromey <tom@tromey.com>
* MAINTAINERS (Core): Add self as Rust maintainer.
As a result of this commit,
9b4c5f878f
(Remove support for thread events without PTRACE_EVENT_CLONE in GDBServer.)
the last usage of td_ta_event_addr td_ta_set_event and
td_ta_event_getmsg were removed. They are no longer used. This patch
is to remove them.
gdb/gdbserver:
2016-08-02 Yao Qi <yao.qi@linaro.org>
* thread-db.c (struct thread_db) <td_ta_event_getmsg_p>: Remove.
<td_ta_set_event_p, td_ta_event_addr_p>: Remove.
(thread_db_load_search): Update.
(try_thread_db_load_1): Don't look for td_ta_event_addr,
td_ta_set_event and td_ta_event_getmsg.
include * libiberty.h (MAX_ALLOCA_SIZE): New macro.
libiberty * make-relative-prefix.c (make_relative_prefix_1): Fall back to
malloc if alloca argument is greater than MAX_ALLOCA_SIZE.
* cp-demangle.c (cplus_demangle_operators): Add f[lrLR].
(d_expression_1): Handle them.
(d_maybe_print_fold_expression): New.
(d_print_comp_inner): Use it.
(d_index_template_argument): Handle negative index.
* cp-demangle.c (cplus_demangle_operators): Add sP and sZ.
(d_print_comp_inner): Handle them.
(d_template_args_1): Split out from d_template_args.
(d_args_length): New.
PR c++/70926
* cplus-dem.c: Handle large values and overflow when demangling
length variables.
(demangle_template_value_parm): Read only until end of mangled string.
(do_hpacc_template_literal): Likewise.
(do_type): Handle overflow when demangling array indices.
* cp-demangle.c (cplus_demangle_print_callback): Avoid zero-length
VLAs.
PR c++/70498
* cp-demangle.c (d_expression_1): Formatting fix.
* cplus-dem.c (enum type_kind_t): Add tk_rvalue_reference
constant.
(demangle_template_value_parm): Handle tk_rvalue_reference
type kind.
(do_type): Support 'O' type id (rvalue references).
* testsuite/demangle-expected: Add tests.
PR c++/70498
* cp-demangle.c: Parse numbers as integer instead of long to avoid
overflow after sanity checks. Include <limits.h> if available.
(INT_MAX): Define if necessary.
(d_make_template_param): Takes integer argument instead of long.
(d_make_function_param): Likewise.
(d_append_num): Likewise.
(d_identifier): Likewise.
(d_number): Parse as and return integer.
(d_compact_number): Handle overflow.
(d_source_name): Change variable type to integer for parsed number.
(d_java_resource): Likewise.
(d_special_name): Likewise.
(d_discriminator): Likewise.
(d_unnamed_type): Likewise.
* testsuite/demangle-expected: Add regression test cases.
* configure: Remove SH5 support.
PR c++/69687
* cplus-dem.c: Include <limits.h> if available.
(INT_MAX): Define if necessary.
(remember_type, remember_Ktype, register_Btype, string_need):
Abort if we detect cases where we the size of the allocation would
overflow.
PR c++/70492
* cplus-dem.c (gnu_special): Handle case where consume_count returns
-1.
PR c++/67394
PR c++/70481
* cplus-dem.c (squangle_mop_up): Zero bsize/ksize after freeing
btypevec/ktypevec.
* testsuite/demangle-expected: Add coverage tests.
