This patch allows the user to set the inferior-tty to "empty", in order
to come back to the default behaviour of using the same tty as gdb is
using.
This is already supported in MI (and tested in gdb.mi/mi-basics.exp).
I added a new test, set-inferior-tty.exp, where I test only the setting
and unsetting of the parameter. It would be nice to actually test that
the inferior output properly goes to the separate tty, but that will be
for another day.
gdb/ChangeLog:
* infcmd.c (set_inferior_io_terminal): Set inferior terminal to
NULL if terminal_name is an empty string.
(_initialize_infcmd): Make the argument of "set inferior-tty"
optional, mention it in the help doc.
gdb/doc/ChangeLog:
* gdb.texinfo (Input/Output): Mention possibility to unset
inferior-tty.
gdb/testsuite/ChangeLog:
* gdb.base/set-inferior-tty.exp: New file.
* gdb.base/set-inferior-tty.c: New file.
This patch fixes a problem that problem triggers if you start an
inferior, e.g., with the "start" command, in a UI created with the
new-ui command, and then run a foreground execution command in the
main UI. Once the program stops for the latter command, typing in the
main UI no longer echoes back to the user.
The problem revolves around this:
- gdb_has_a_terminal computes its result lazily, on first call.
that is what saves gdb's initial main UI terminal state (the UI
associated with stdin):
our_terminal_info.ttystate = serial_get_tty_state (stdin_serial);
This is the state that target_terminal_ours() restores.
- In this scenario, the gdb_has_a_terminal function happens to be
first ever called from within the target_terminal_init call in
startup_inferior:
(top-gdb) bt
#0 gdb_has_a_terminal () at src/gdb/inflow.c:157
#1 0x000000000079db22 in child_terminal_init_with_pgrp () at src/gdb/inflow.c:217
[...]
#4 0x000000000065bacb in target_terminal_init () at src/gdb/target.c:456
#5 0x00000000004676d2 in startup_inferior () at src/gdb/fork-child.c:531
[...]
#7 0x000000000046b168 in linux_nat_create_inferior () at src/gdb/linux-nat.c:1112
[...]
#9 0x00000000005f20c9 in start_command (args=0x0, from_tty=1) at src/gdb/infcmd.c:657
If the command to start the inferior is issued on the main UI, then
readline will have deprepped the terminal when we reach the above, and
the problem doesn't appear.
If however the command is issued on a non-main UI, then when we reach
that gdb_has_a_terminal call, the main UI's terminal state is still
set to whatever readline has sets it to in rl_prep_terminal, which
happens to have echo disabled. Later, when the following synchronous
execution command finishes, we'll call target_terminal_ours to restore
gdb's the main UI's terminal settings, and that restores the terminal
state with echo disabled...
Conceptually, the fix is to move the gdb_has_a_terminal call earlier,
to someplace during GDB initialization, before readline/ncurses have
had a chance to change terminal settings. Turns out that
"set_initial_gdb_ttystate" is exactly such a place.
I say conceptually, because the fix actually inlines the
gdb_has_a_terminal part that saves the terminal state in
set_initial_gdb_ttystate and then simplifies gdb_has_a_terminal, since
there's no point in making gdb_has_a_terminal do lazy computation.
gdb/ChangeLog:
2016-08-23 Pedro Alves <palves@redhat.com>
PR gdb/20494
* inflow.c (our_terminal_info, initial_gdb_ttystate): Update
comments.
(enum gdb_has_a_terminal_flag_enum, gdb_has_a_terminal_flag):
Delete.
(set_initial_gdb_ttystate): Record our_terminal_info here too,
instead of ...
(gdb_has_a_terminal): ... here. Reimplement in terms of
initial_gdb_ttystate. Make static.
* terminal.h (gdb_has_a_terminal): Delete declaration.
(set_initial_gdb_ttystate): Add comment.
* top.c (show_interactive_mode): Use input_interactive_p instead
of gdb_has_a_terminal.
gdb/testsuite/ChangeLog:
2016-08-23 Pedro Alves <palves@redhat.com>
PR gdb/20494
* gdb.base/new-ui-echo.c: New file.
* gdb.base/new-ui-echo.exp: New file.
Remote testing isn't considered in signals-state-child.exp, so the it
fails like
shell diff -s /scratch/yao/gdb/build-git/aarch64-linux-gnu/gdb/testsuite/outputs/gdb.base/signals-state-child/standalone.txt /scratch/yao/gdb/build-git/aarch64-linux-gnu/gdb/testsuite/outputs/gdb.base/signals-state-child/gdb.txt^M
diff: /scratch/yao/gdb/build-git/aarch64-linux-gnu/gdb/testsuite/outputs/gdb.base/signals-state-child/standalone.txt: No such file or directory^M
(gdb) FAIL: gdb.base/signals-state-child.exp: signals states are identical
This patch is to fix it.
gdb/testsuite:
2016-08-23 Yao Qi <yao.qi@linaro.org>
* gdb.base/signals-state-child.exp: Set variables gdb_txt and
standalone_txt. Delete gdb_txt and standalone_txt on host
and target. Spawn the binary on target. Copy files from
target to host.
Loading a core dump that was either generated on a system running
pristine glibc master, or on a Fedora/RHEL system with LD_DEBUG=unused
set in the environment, solib-svr4.c:svr4_current_sos fails to filter
out the vDSO, resulting in:
(gdb) core-file corefile.core^M
[New LWP 2362]^M
warning: Could not load shared library symbols for linux-vdso.so.1.^M
Do you need "set solib-search-path" or "set sysroot"?^M
Core was generated by `build-gdb/gdb/testsuite/outputs/gdb.base/corefile/'.^M
...
The problem is that gdbarch_vsyscall_range does not support core
inferiors at all.
When live debugging, we're finding the vDSO's start address with
auxv/AT_SYSINFO_EHDR, and then we find the vDSO's size by look for the
corresponding mapping, by parsing /proc/PID/maps. When debugging a
core dump, we can also determine the starting address from
auxv/AT_SYSINFO_EHDR. However, we obviously can't read the core
mappings out of the host's /proc. But we can instead look for a
corresponding load segment in the core's bfd.
gdb/ChangeLog:
2016-08-22 Pedro Alves <palves@redhat.com>
PR gdb/20505
* linux-tdep.c (linux_vsyscall_range_raw): For core inferiors,
find the vDSO's start address with AT_SYSINFO_EHDR too, and
determine the vDSO's size by finding the PT_LOAD segment that
matches AT_SYSINFO_EHDR.
gdb/testsuite/ChangeLog:
2016-08-22 Pedro Alves <palves@redhat.com>
PR gdb/20505
* gdb.base/vdso-warning.exp: Test core dumps too. Use
with_test_prefix. Factor out bits to ...
(test_no_vdso): ... this new procedure.
I see the following warning when running signals-state-child.exp.
gdb/testsuite/gdb.base/signals-state-child.c:77:4: warning: too many arguments for format [-Wformat-extra-args]
fprintf (out, "sigaction={sa_handler=", i);
^
this patch is to remove the argument from fprintf.
gdb/testsuite:
2016-08-12 Yao Qi <yao.qi@linaro.org>
* gdb.base/signals-state-child.c (main): Remove "i" from fprintf's
argument list.
gdb's (or gdbserver's) own signal handling should not interfere with
the signal dispositions their spawned children inherit. However, it
currently does. For example, some paths in gdb cause SIGPIPE to be
set to SIG_IGN, and as consequence, the child starts with SIGPIPE to
set to SIG_IGN too, even though gdb was started with SIGPIPE set to
SIG_DFL.
This is because the exec family of functions does not reset the signal
disposition of signals that are set to SIG_IGN:
http://pubs.opengroup.org/onlinepubs/7908799/xsh/execve.html
Signals set to the default action (SIG_DFL) in the calling process
image are set to the default action in the new process
image. Signals set to be ignored (SIG_IGN) by the calling process
image are set to be ignored by the new process image. Signals set to
be caught by the calling process image are set to the default action
in the new process image (see <signal.h>).
And neither does it reset signal masks or flags.
In order to be transparent, when spawning new child processes to debug
(with "run", etc.), reset signal actions and mask back to what was
originally inherited from gdb/gdbserver's parent, just before execing
the target program to debug.
gdb/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (SFILES): Add
common/signals-state-save-restore.c.
(HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h.
(COMMON_OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* configure: Regenerate.
* fork-child.c: Include "signals-state-save-restore.h".
(fork_inferior): Call restore_original_signals_state.
* main.c: Include "signals-state-save-restore.h".
(captured_main): Call save_original_signals_state.
* common/common.m4: Add sigaction to AC_CHECK_FUNCS checks.
* common/signals-state-save-restore.c: New file.
* common/signals-state-save-restore.h: New file.
gdb/gdbserver/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* config.in: Regenerate.
* configure: Regenerate.
* linux-low.c: Include "signals-state-save-restore.h".
(linux_create_inferior): Call
restore_original_signals_state.
* server.c: Include "dispositions-save-restore.h".
(captured_main): Call save_original_signals_state.
gdb/testsuite/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* gdb.base/signals-state-child.c: New file.
* gdb.base/signals-state-child.exp: New file.
* gdb.gdb/selftest.exp (do_steps_and_nexts): Add new pattern.
When a bad interpreter name is passed to new-ui, such as:
(gdb) new-ui bloop /dev/pts/10
A partially created UI is left in the UI list, with interp set to NULL.
Trying to do anything that will print on this UI (such as "start") will
cause a segmentation fault.
Changes in v2:
- Use with_test_prefix to namespace test procedures
- Give an explicit stable test name
- Add a "bad terminal path" test
- Remove useless runto_main
- Add missing intro comments
I did not factor out the pty spawn, as there is some magic involved I
don't quite understand. But it wouldn't bring that much anyway.
gdb/ChangeLog:
* top.h (make_delete_ui_cleanup): New declaration.
* top.c (delete_ui_cleanup): New function.
(make_delete_ui_cleanup): New function.
(new_ui_command): Create restore_ui cleanup earlier, create a
delete_ui cleanup and discard it on success.
gdb/testsuite/ChangeLog:
* gdb.base/new-ui.exp (do_test_invalid_args): New
procedure.
Implement support to add catchpoints for a group of related syscalls
using the syntax:
(gdb) catch syscall group:<group>
or
(gdb) catch syscall g:<group>
Several groups are predefined in the xml files for all architectures
supported by GDB over Linux. They are based on the groups defined by
strace.
gdb/
* xml-syscall.c (get_syscalls_by_group): New.
(get_syscall_group_names): New.
(struct syscall_group_desc): New structure to store group data.
(struct syscalls_info): Include field to store the group list.
(sysinfo_free_syscall_group_desc): New.
(free_syscalls_info): Free group list.
(syscall_group_create_syscall_group_desc): New.
(syscall_group_add_syscall): New.
(syscall_create_syscall_desc): Add syscall to its groups.
(syscall_start_syscall): Load group attribute.
(syscall_group_get_group_by_name): New.
(xml_list_syscalls_by_group): New.
(xml_list_of_groups): New.
* xml-syscall.h (get_syscalls_by_group): Export function
to retrieve a list of syscalls filtered by the group name.
(get_syscall_group_names): Export function to retrieve the list
of syscall groups.
* break-catch-syscall.c (catch_syscall_split_args): Verify if
argument is a syscall group and expand it to a list of syscalls
when creating catchpoints.
(catch_syscall_completer): Add word completion for system call
groups.
* configure.ac: Include dependency for xsltproc when building
in maintainer-mode.
* break-catch-syscall.c (_initialize_breakpoint): Update catch
syscall command documentation.
* NEWS: Include section about catching groups of syscalls.
* configure: Regenerate.
* data-directory/Makefile.in: Generate syscall xml when building
in maintainer mode.
* syscalls/gdb-syscalls.dtd: Include group attribute to the
syscall element.
* syscalls/apply-defaults.xsl: New.
* syscalls/linux-defaults.xml.in: New.
* syscalls/aarch64-linux.xml: Rename to aarch64-linux.xml.in.
* syscalls/amd64-linux.xml: Rename to amd64-linux.xml.in.
* syscalls/arm-linux.xml: Rename to arm-linux.xml.in.
* syscalls/bfin-linux.xml: Rename to bfin-linux.xml.in.
* syscalls/i386-linux.xml: Rename to i386-linux.xml.in.
* syscalls/mips-n32-linux.xml: Rename to mips-n32-linux.xml.in.
* syscalls/mips-n64-linux.xml: Rename to mips-n64-linux.xml.in.
* syscalls/mips-o32-linux.xml: Rename to mips-o32-linux.xml.in.
* syscalls/ppc-linux.xml: Rename to ppc-linux.xml.in.
* syscalls/ppc64-linux.xml: Rename to ppc64-linux.xml.in.
* syscalls/s390-linux.xml: Rename to s390-linux.xml.in.
* syscalls/s390x-linux.xml: Rename to s390x-linux.xml.in.
* syscalls/sparc-linux.xml: Rename to sparc-linux.xml.in.
* syscalls/sparc64-linux.xml: Rename to sparc64-linux.xml.in.
* syscalls/aarch64-linux.xml: Regenerate.
* syscalls/amd64-linux.xml: Regenerate.
* syscalls/arm-linux.xml: Regenerate.
* syscalls/i386-linux.xml: Regenerate.
* syscalls/mips-n32-linux.xml: Regenerate.
* syscalls/mips-n64-linux.xml: Regenerate.
* syscalls/mips-o32-linux.xml: Regenerate.
* syscalls/ppc-linux.xml: Regenerate.
* syscalls/ppc64-linux.xml: Regenerate.
* syscalls/s390-linux.xml: Regenerate.
* syscalls/s390x-linux.xml: Regenerate.
* syscalls/sparc-linux.xml: Regenerate.
* syscalls/sparc64-linux.xml: Regenerate.
gdb/testsuite/
* gdb.base/catch-syscall.exp (do_syscall_tests): Add call
to test_catch_syscall_group.
(test_catch_syscall_group): New.
gdb/doc/
* gdb.texinfo (Set Catchpoints): Add 'group' argument to catch
syscall.
This patch fixes problems with a few GDB testsuites when executing in a
path that contains special characters (e.g. "++"). When such paths are
used as a regular expression, the regular expression parser will choke
and cause the tests to fail. This patch uses string_to_regexp to
escape strings that will be used as regular expressions, in order to
sanitize path names used in expect scripts.
2016-07-15 Zachary Welch <zwelch@codesourcery.com>
Don Breazeal <donb@codesourcery.com>
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Escape paths used in regular expressions.
* gdb.stabs/weird.exp: Likewise.
PR cli/18053 concerns a couple of minor bugs in the JIT debuginfo
support. First, jit-reader-load should use filename completion and
support tilde expansion. Second, the help for jit-reader-unload is
incorrect. While working on this I also realized that
jit-reader-unload should use the no-op completer, so I've included
that as well.
Built and regtested on x86-64 Fedora 23. A completer test for
jit-reader-load is included, but not a tilde-expansion test, as I
couldn't think of a reliable way to test that.
2016-07-13 Tom Tromey <tom@tromey.com>
PR cli/18053:
* jit.c (jit_reader_load_command): Use tilde_expand.
(_initialize_jit): Fix help for jit-reader-unload. Set completer
for new commands.
2016-07-13 Tom Tromey <tom@tromey.com>
PR cli/18053:
* gdb.base/jit-so.exp (one_jit_test): Add jit-reader-load
completion test.
The jit-reader.exp test isn't really exercising the jit-reader's
unwinder API at all. This commit address that, and then fixes GDB
problems exposed.
- The custom JIT reader provided for the jit-reader.exp testcase
always rejects the jitted function's frame...
This is because the custom JIT reader in the testcase never ever
sets state->code_begin/end, so the bounds check in
gdb.base/jitreader.c:unwind_frame:
if (this_ip >= state->code_end || this_ip < state->code_begin)
return GDB_FAIL;
tends to fail, unless you're "lucky" (because it references
uninitialized data).
The result is that GDB is always actually using a built-in unwinder
for the jitted function.
- The provided unwinder doesn't do anything that GDB's built-in
unwinder can't do.
IOW, we can't really tell whether the JIT reader's unwinder is
working or not.
I fixed that by making the jitted function mangle its own stack
pointer with a xor, and then teaching the jit unwinder to demangle
it back (another xor). So now "backtrace" with GDB's built-in
unwinder fails while with the jit unwinder, it succeeds.
- GDB crashes after unloading the JIT reader, and flushing frames...
I made the testcase use the "flushregs" command after unloading the
JIT reader, to force the JIT frames to be flushed. However, that
crashes GDB...
When reinit_frame_cache tears down a frame's cache, it calls its
unwinder's dealloc_cache method, which for JIT frames ends up in
jit.c:jit_dealloc_cache. This function calls each of the frame's
gdb_reg_value's "free" pointer:
for (i = 0; i < gdbarch_num_regs (frame_arch); i++)
if (priv_data->registers[i] && priv_data->registers[i]->free)
priv_data->registers[i]->free (priv_data->registers[i]);
and the problem is these gdb_reg_value instances have been returned
by the JIT reader that has been already unloaded, and their "free"
function pointers likely point to functions in the DSO that has
already been unloaded...
A fix for that could be to call reinit_frame_cache in
jit_reader_unload_command _before_ unloading the jit reader DSO so
that the jit reader is given a chance to clean up the gdb_reg_values
before it is unloaded. However, the fix for the point below makes
this unnecessary, because it stops jit.c from keeping around
gdb_reg_values in the first place.
- However, it still makes sense to clear the frame cache when loading
or unloading a JIT unwinder.
This makes testing a JIT unwinder a bit simpler.
- Not only the frame cache actually -- gdb is not unloading the
jit-registered objfiles when the JIT reader is unloaded, and not
loading the already-registered descriptors when a JIT reader is
loaded.
The new test exercises unloading the jit reader, loading it back
again, and then making sure the JIT reader's unwinder works again.
Without the unload/re-load of already-read descriptors, the newly
loaded JIT would have no idea where the new function is, because
it's stored at symbol read time.
- I added a couple "info frame" calls to the test, and that
crashes GDB...
The problem is that jit_frame_prev_register assumes it'll only be
called for raw registers, so when it gets a pseudo register number,
the "priv->registers[reg]" access is really an out-of-bounds access.
To fix that, I made jit_frame_prev_register use
gdbarch_pseudo_register_read_value for reading the pseudo-registers.
However, that works with a regcache and we don't have one. To fix
that, I made the JIT unwinder store a regcache in its cache instead
of an array of gdb_reg_value pointers.
gdb/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* jit.c (jit_reader_load_command): Call reinit_frame_cache and
jit_inferior_created_hook.
(jit_reader_unload_command): Call reinit_frame_cache and
jit_inferior_exit_hook.
* jit.c (struct jit_unwind_private) <registers>: Delete field.
<regcache>: New field.
(jit_unwind_reg_set_impl): Set the register's value in the
regcache. Free the passed-in gdb_reg_value.
(jit_dealloc_cache): Adjust to free the regcache.
(jit_frame_sniffer): Allocate a regcache instead of an array of
gdb_reg_value pointers.
(jit_frame_this_id): Adjust.
(jit_frame_prev_register): Read raw registers off of the regcache
instead of from the gdb_reg_value pointer array. Use
gdbarch_pseudo_register_read_value to read pseudo registers.
* regcache.c (regcache_raw_set_cached_value): New function,
factored out from ...
(regcache_raw_write): ... here.
* regcache.h (regcache_raw_set_cached_value): Declare.
gdb/testsuite/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
* gdb.base/jit-reader.exp (info_registers_current_frame): New
procedure.
(jit_reader_test): Test the jit reader's unwinder.
* gdb.base/jithost.c (jit_function_00_code): New global.
(main): Use memcpy to fill in the mmapped code, instead of poking
bytes manually here.
* gdb.base/jitreader.c (enum register_mapping) <AMD64_RBP>: New
value.
(read_debug_info): Save the function's range.
(read_sp): New function.
(unwind_frame): Use it. Also unwind RBP.
(get_frame_id): Use read_sp.
(gdb_init_reader): Use calloc instead of malloc.
* lib/gdb.exp (get_hexadecimal_valueof): Add optional 'test'
parameter. Use gdb_test_multiple.
Currently, we use 123456789 as unknown or illegal syscall number, and
expect program return ENOSYS. Although 123456789 is an illegal syscall
number on arm linux, kernel sends SIGILL rather than returns -ENOSYS.
However, arm linux kernel returns -ENOSYS if syscall number is within
0xf0001..0xf07ff, so we can use 0xf07ff for unknown_syscall in test.
gdb/testsuite:
2016-06-29 Yao Qi <yao.qi@linaro.org>
* gdb.base/catch-syscall.c [__arm__]: Set unknown_syscall to
0x0f07ff.
In 82075af2c1 (Implement 'catch syscall'
for gdbserver), only x86 is supported, but the test can still be run
on other linux targets, like aarch64 and ppc, with native-gdbserver.
This causes many new fails.
This patch removes the check on isnative and on target triplets.
Instead, we can insert catch point, and resume the program to see whether
catch syscall is supported or not.
gdb/testsuite:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* gdb.base/catch-syscall.exp: Remove check on isnative and target
triplets. Start gdb, execute catch syscall, and continue. Check
gdb's output to determine catch syscall is supported.
GDB computes structure byte offsets using a 32 bit integer. And,
first it computes the offset in bits and then converts to bytes. The
result is that any offset that if 512K bytes or larger overflows.
This patch changes GDB to use LONGEST for such calculations.
PR gdb/17520 Structure offset wrong when 1/4 GB or greater.
* c-lang.h: Change all parameters, variables, and struct or union
members used as struct or union fie3ld offsets from int to
LONGEST.
* c-valprint.c: Likewise.
* cp-abi.c: Likewise.
* cp-abi.h: Likewise.
* cp-valprint.c: Likewise.
* d-valprint.c: Likewise.
* dwarf2loc.c: Likewise.
* eval.c: Likewise.
* extension-priv.h: Likewise.
* extension.c: Likewise.
* extension.h: Likewise.
* findvar.c: Likewise.
* gdbtypes.h: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-valprint.c: Likewise.
* guile/guile-internal.h: Likewise.
* guile/scm-pretty-print.c: Likewise.
* jv-valprint.c Likewise.
* opencl-lang.c: Likewise.
* p-lang.h: Likewise.
* python/py-prettyprint.c: Likewise.
* python/python-internal.h: Likewise.
* spu-tdep.c: Likewise.
* typeprint.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* valprint.h: Likewise.
* value.c: Likewise.
* value.h: Likewise.
* p-valprint.c: Likewise.
* c-typeprint.c (c_type_print_base): When printing offset, use
plongest, not %d.
* gdbtypes.c (recursive_dump_type): Ditto.
This adds a test that uses new-ui to create a secondary console, and
then runs some basic smoke tests. It ensures that:
- synchronous commands send output to the UI that initiated it
- asynchronous events like breakpoint hits are reported on all
consoles.
- "new-ui" without arguments doesn't crash.
- The "new-ui" command doesn't repeat.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* gdb.base/new-ui.exp: New file.
* lib/mi-support.exp (switch_gdb_spawn_id): Move to ...
* lib/gdb.exp (switch_gdb_spawn_id): ... here.
(with_spawn_id): New procedure.
Originally intended to be committed on 2013-01-17 in
675921c059 (Test case for the
jit-reader), but by mistake the files were not added. Fortunately
they still work.
gdb/testsuite/ChangeLog:
2016-06-17 Sanjoy Das <sanjoy@playingwithpointers.com>
* gdb.base/jit-reader.exp: New file.
* gdb.base/jithost.c: New file.
* gdb.base/jithost.h: New file.
* gdb.base/jitreader.c : New file.
* gdb.base/jit-protocol.h: New file.
This patch extends step-over-syscall.exp by setting different values to
detach-on-fork and follow-fork.
gdb/testsuite:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* gdb.base/step-over-syscall.exp (break_cond_on_syscall): New
parameters follow_fork and detach_on_fork. Set follow-fork-mode
and detach-on-fork. Adjust tests.
(top level): Invoke break_cond_on_syscall with combinations of
syscall, follow-fork-mode and detach-on-fork.
This patch fixes a GDBserver crash when one thread is stepping over
a syscall instruction which is exit. Step-over isn't finished due
to the exit, but GDBserver doesn't clean up the state of step-over,
so in the wait next time, GDBserver will wait on step_over_bkpt,
which is already exited, and GDBserver crashes because
'requested_child' is NULL. See gdbserver logs below,
Need step over [LWP 14858]? yes, found breakpoint at 0x2aaaaad91307^M
proceed_all_lwps: found thread 14858 needing a step-over^M
Starting step-over on LWP 14858. Stopping all threads^M
>>>> entering void stop_all_lwps(int, lwp_info*)
....
<<<< exiting void stop_all_lwps(int, lwp_info*)^M
Done stopping all threads for step-over.^M
pc is 0x2aaaaad91307^M
Writing 0f to 0x2aaaaad91307 in process 14858^M
Could not find fast tracepoint jump at 0x2aaaaad91307 in list (uninserting).^M
pending reinsert at 0x2aaaaad91307^M
step from pc 0x2aaaaad91307^M
Resuming lwp 14858 (step, signal 0, stop not expected)^M
# Start step-over for LWP 14858
>>>> entering ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)
....
LLFE: 14858 exited.
...
<<<< exiting ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)
# LWP 14858 exited
.....
>>>> entering ptid_t linux_wait_1(ptid_t, target_waitstatus*, int)^M
linux_wait_1: [<all threads>]^M
step_over_bkpt set [LWP 14858.14858], doing a blocking wait
# but step_over_bkpt is still LWP 14858, which is wrong
The fix is to finish step-over if it is ongoing, and unsuspend other
threads. Without the fix in linux-low.c, GDBserver will crash in
with running gdb.base/step-over-exit.exp.
gdb/gdbserver:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (unsuspend_all_lwps): Declare.
(linux_low_filter_event): If thread exited, call finish_step_over.
If step-over is finished, unsuspend other threads.
gdb/testsuite:
2016-06-17 Yao Qi <yao.qi@linaro.org>
* gdb.base/step-over-exit.c: New.
* gdb.base/step-over-exit.exp: New.
If a target does not support making function calls from GDB then in a
number of test files, we currently report an XFAIL and skip some, or all
of the tests. This commit changes the XFAIL to an UNSUPPORTED as this
seems more appropriate in these cases.
Some of the tests used bug ID 2416 to be reported in the XFAIL. In the
current GDB bugzilla bug 2416 has nothing to do with calling target
functions from GDB.
gdb/testsuite/ChangeLog:
* gdb.base/call-ar-st.exp: Report unsupported rather than xfail
for unsupported target features.
* gdb.base/call-rt-st.exp: Likewise.
* gdb.base/call-sc.exp: Likewise.
* gdb.base/call-signal-resume.exp: Likewise.
* gdb.base/call-strs.exp: Likewise.
* gdb.base/callexit.exp: Likewise.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/printcmds.exp: Likewise.
* gdb.base/ptype.exp: Likewise.
* gdb.base/structs.exp: Likewise.
* gdb.base/unwindonsignal.exp: Likewise.
* gdb.cp/gdb2495.exp: Likewise.
* gdb.cp/templates.exp: Likewise.
* gdb.cp/virtfunc.exp: Likewise.
* gdb.threads/hand-call-in-threads.exp: Likewise.
* gdb.threads/interrupted-hand-call.exp: Likewise.
* gdb.threads/thread-unwindonsignal.exp: Likewise.
This change adds support for specifying a negative repeat count to
all the formats of the 'x' command to examine memory backward.
A new testcase 'examine-backward' is added to cover this new feature.
Here's the example output from the new feature:
<format 'i'>
(gdb) bt
#0 Func1 (n=42, p=0x40432e "hogehoge") at main.cpp:5
#1 0x00000000004041fa in main (argc=1, argv=0x7fffffffdff8) at main.cpp:19
(gdb) x/-4i 0x4041fa
0x4041e5 <main(int, char**)+11>: mov %rsi,-0x10(%rbp)
0x4041e9 <main(int, char**)+15>: lea 0x13e(%rip),%rsi
0x4041f0 <main(int, char**)+22>: mov $0x2a,%edi
0x4041f5 <main(int, char**)+27>: callq 0x404147
<format 'x'>
(gdb) x/-4xw 0x404200
0x4041f0 <main(int, char**)+22>: 0x00002abf 0xff4de800 0x76e8ffff 0xb8ffffff
(gdb) x/-4
0x4041e0 <main(int, char**)+6>: 0x7d8910ec 0x758948fc 0x358d48f0 0x0000013e
gdb/ChangeLog:
* NEWS: Mention that GDB now supports a negative repeat count in
the 'x' command.
* printcmd.c (decode_format): Allow '-' in the parameter
"string_ptr" to accept a negative repeat count.
(find_instruction_backward): New function.
(read_memory_backward): New function.
(integer_is_zero): New function.
(find_string_backward): New function.
(do_examine): Use new functions to examine memory backward.
(_initialize_printcmd): Mention that 'x' command supports a negative
repeat count.
gdb/doc/ChangeLog:
* gdb.texinfo (Examining Memory): Document negative repeat
count in the 'x' command.
gdb/testsuite/ChangeLog:
* gdb.base/examine-backward.c: New file.
* gdb.base/examine-backward.exp: New file.
Assume that we have a C program like this:
struct foo_type
{
int var;
} foo;
struct foo_type *foo_ptr = &foo;
int
main ()
{
return foo_ptr->var;
}
Then GDB should be able to evaluate the following, however, it currently
does not:
(gdb) start
...
(gdb) whatis &(foo_ptr->var)
Attempt to take address of value not located in memory.
The problem is that in EVAL_AVOID_SIDE_EFFECTS mode,
eval.c:evaluate_subexp_standard always returns a not_lval value as the
result for a STRUCTOP_PTR operation. As a consequence, the rest of
the code believes that one cannot take the address of the returned
value.
This patch fixes STRUCTOP_PTR handling so that the VALUE_LVAL
attribute for the returned value is properly initialized. After this
change, the above session becomes:
(gdb) start
...
(gdb) whatis &(foo_ptr->var)
type = int *
This commit is largely the same as commit 2520f728b7 (Forward
VALUE_LVAL when avoiding side effects for STRUCTOP_STRUCT) but applied
to STRUCTOP_PTR rather than STRUCTOP_STRUCT. Both of these commits are
building on top of commit ac1ca910d7 (Fixes for PR exp/15364).
gdb/ChangeLog:
* eval.c (evaluate_subexp_standard): If EVAL_AVOID_SIDE_EFFECTS
mode, forward the VALUE_LVAL attribute to the returned value in
the STRUCTOP_PTR case.
gdb/testsuite/ChangeLog:
* gdb.base/whatis.c: Extend the test case.
* gdb.base/whatis.exp: Add additional tests.
This patch fixes a syntax error which caused a failure in
annota-input-while-running.exp to crash the test suite runner.
2016-05-24 Francis Ricci <francisjricci@gmail.com>
* gdb.base/annota-input-while-running.exp: Fix syntax error.
batch-preserve-term-settings.exp fails if the shell prompt isn't $. It
is # in our testing env. In fact, the shell prompt can be anything.
The perfect solution would be "set_board_info shell_prompt" in the
host board file, and use board_info shell_prompt in
batch-preserve-term-settings.exp. This is a little bit overkill to
me, and we still need to figure out the different prompts on different
shells. I also tried to start shell with the prompt preset, but there is
not unique way to set shell prompt in different shells, so I give up.
It is reasonably simple to match either $ or # for the shell prompt, and
we can easily extend it to match other char, like >.
gdb/testsuite:
2016-05-16 Yao Qi <yao.qi@linaro.org>
* gdb.base/batch-preserve-term-settings.exp: Remove variable
shell_prompt. Update shell_prompt_re.
This test currently uses [is_remote target] to check if the test is
supported. This is not quite correct, as the limitation is actually
that it requires support for "running", ruling out stub-like targets.
Therefore, it should check for use_gdb_stub.
This has no visible effect right now, but it will once we make the
native-gdbserver board non-dejagnu-remote.
gdb/testsuite/ChangeLog:
* gdb.base/solib-display.exp: Check for [use_gdb_stub] instead
of [is_remote target],
This test seems to work with both native-gdbserver and
native-extended-gdbserver, so I removed the remote check.
When running with native-gdbserver (a stub-like target), detach makes
gdbserver stop and gdb disconnect. runto_main just spawns a brand new
gdbserver. So it tests the exact same thing twice. It doesn't hurt
though.
With native-extended-gdbserver, the test is probably a bit more useful
(and similar to native). It tests running/detaching twice using the
same gdb/gdbserver instances, since with extended-remote, you can
detach/attach/run all you want, unlike with remote.
gdb/testsuite/ChangeLog:
* gdb.base/detach.exp: Remove is_remote check.
The comment says that we can't use runto_main here becore it doesn't
know how to handle annotation. Instead, the test puts a breakpoint at
main and calls run by hand. Therefore, it can't work with stub targets,
since they can't "run". The check should be then changed to check the
use_gdb_stub variable instead of [is_remote target].
But as an alternative, we can just use runto_main and enable annotations
after, since the "run to main" part is not really part of what we want
to test.
I also removed the "set test..." line that is unused.
gdb/testsuite/ChangeLog:
* gdb.base/annota-input-while-running.exp: Don't check for
[is_remote target]. Enable annotations after running to main.
Remove unused "set test..." line.
This patch makes gdb_load_shlibs return the destination path of the
copied library. To make the procedure implementation and interface more
straightforward, it also changes it so that it accepts a single shared
library path at the time. Therefore, calls that are passed multiple
libraries:
gdb_load_shlibs $lib1 $lib2
must be changed to separate calls:
gdb_load_shlibs $lib1
gdb_load_shlibs $lib2
A subtle impact is the solib-search-path handling. In the former
version, solib-search-path is set using the directory of the first
passed lib (further calls overwrite the value). In the later version,
the directory of the library passed to the last call to gdb_load_shlibs
remnains. I don't think that's a problem in practice, since if we had
tests that needed multiple different paths in solib-search-path, they
wouldn't work in the first place.
Changed in v2:
* Split behavioural and rename changes in two separate patches.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_load_shlibs): Accept a single argument. Return
result of gdb_remote_download.
* gdb.base/ctxobj.exp: Split gdb_load_shlibs call.
* gdb.base/dso2dso.exp: Likewise.
* gdb.base/global-var-nested-by-dso.exp: Likewise.
* gdb.base/print-file-var.exp: Likewise.
* gdb.base/shlib-call.exp: Likewise.
* gdb.base/shreloc.exp: Likewise.
* gdb.base/solib-overlap.exp: Likewise.
* gdb.base/solib-weak.exp (do_test): Likewise.
* gdb.base/unload.exp: Likewise.
I get a timeout fail in branch-to-self.exp when it is compiled by a
bare-mental target running qemu, which doesn't have signal.
The test should be skipped if gdb,nosignals exists, and that is
what this patch does.
gdb/testsuite:
2016-04-27 Yao Qi <yao.qi@linaro.org>
* gdb.base/branch-to-self.exp: Skip it if gdb,nosignals
exists.
Hi,
I am seeing the fail below on aarch64-linux with gcc 4.9.2,
break main
Breakpoint 1 at 0x4006e8: file binutils-gdb/gdb/testsuite/gdb.base/annota1.c, line 14.^M
(gdb) FAIL: gdb.base/annota1.exp: breakpoint main
the test expects the breakpoint is set on line 15. Let us look at
the main function,
12 int
13 main (void)
14 {
15 int my_array[3] = { 1, 2, 3 }; /* break main */
16
17 value = 7;
18
19 #ifdef SIGUSR1
20 signal (SIGUSR1, handle_USR1);
21 #endif
(gdb) disassemble main
Dump of assembler code for function main:
0x00000000004006e0 <+0>: stp x29, x30, [sp,#-48]!
0x00000000004006e4 <+4>: mov x29, sp
0x00000000004006e8 <+8>: adrp x0, 0x411000 <signal@got.plt>
0x00000000004006ec <+12>: add x0, x0, #0x40
the breakpoint is set on the right address after skipping prologue, but
0x00000000004006e8 is mapped to the line 14, as shown below,
(gdb) maintenance info line-table
objfile: /home/yao.qi/source/build-aarch64/gdb/testsuite/outputs/gdb.base/annota1/annota1 ((struct objfile *) 0x2b0e1850)
compunit_symtab: ((struct compunit_symtab *) 0x2b0ded50)
symtab: /home/yao.qi/source/binutils-gdb/gdb/testsuite/gdb.base/annota1.c ((struct symtab *) 0x2b0dedd0)
linetable: ((struct linetable *) 0x2b12c8b0):
INDEX LINE ADDRESS
0 7 0x00000000004006d0
1 8 0x00000000004006d8
2 14 0x00000000004006e0
3 14 0x00000000004006e8
4 15 0x00000000004006fc
so GDB does nothing wrong. Program hits breakpoint on either line 14
or line 15 is right to me. With anther gcc (4.9.3), the line-table looks
correct, and no test fail. Instead of setting breakpoint on main and
assuming the line is what we get from the source, we can set breakpoint
on that line. On the other hand, the test prints the values of the
array and check, so we need to set breakpoint on the line setting the
values of array and "next", rather than setting the breakpoint on main.
gdb/testsuite:
2016-04-22 Yao Qi <yao.qi@linaro.org>
* gdb.base/annota1.exp: Set breakpoint on line $main_line.
* gdb.base/annota3.exp: Likewise.
on CentOS-7.2 I get
Running /home/jkratoch/redhat/gdb-test-reg/gdb/testsuite/gdb.base/jit.exp ...
FAIL: gdb.base/jit.exp: one_jit_test-1: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit.exp: one_jit_test-2: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 1
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: detach (the program is no longer running)
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: attach
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 0
FAIL: gdb.base/jit.exp: PIE: one_jit_test-1: continue to breakpoint: break here 2 (the program exited)
Running /home/jkratoch/redhat/gdb-test-reg/gdb/testsuite/gdb.base/jit-so.exp ...
FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 2 (the program exited)
since:
85af34ee0211eedf8d30a5c44dfc59dddf8b512a is the first bad commit
commit 85af34ee0211eedf8d30a5c44dfc59dddf8b512a
Author: Pedro Alves <palves@redhat.com>
Date: Thu Mar 31 19:28:47 2016 +0100
Add regression test for PR gdb/19858 (JIT code registration on attach)
The compiled code's .debug_line is wrong (for the simplistic approach of GDB
to put a breakpoint on the first address belonging to that source line) and so
GDB misses the breakpoint at the last line:
WAIT_FOR_GDB; return 0; /* gdb break here 2 */
Most of the patch is just about reindentation, no changes there.
gdb/testsuite/ChangeLog
2016-04-08 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix compatibility with gcc-4.8.5-4.el7.x86_64.
* gdb.base/jit-main.c: Use exit after usage.
$ GDBHISTFILE=/tmp/gdbhistfile runtest gdb.base/gdbhistsize-history.exp gdb.base/gdbinit-history.exp
Running ./gdb.base/gdbinit-history.exp ...
FAIL: gdb.base/gdbinit-history.exp: home=gdbinit-history/unlimited gdbhistsize=1000: show commands
FAIL: gdb.base/gdbinit-history.exp: home=gdbinit-history/unlimited gdbhistsize=foo: show commands
Running ./gdb.base/gdbhistsize-history.exp ...
FAIL: gdb.base/gdbhistsize-history.exp: histsize=: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=20: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize= 20 : show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=-5: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=not_an_integer: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=10zab: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=-5ab: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=99999999999999999999999999999999999: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=50: show commands
This happens for my setup due to my:
$ grep GDB ~/.bashrc
export GDBHISTFILE="$HOME/.gdb_history"
gdb/testsuite/ChangeLog
2016-04-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/gdbhistsize-history.exp: Save and unset GDBHISTFILE and
GDBHISTSIZE prior to the tests.
* gdb.base/gdbinit-history.exp: Likewise.
This patch removes gdb_download in favor of gdb_remote_download, since
they are very close in functionality. Also, in preparation for the
following patch about shared library handling during tests, it improves
gdb_remote_download so that it uses standard_output_file for any
destination board that is local, not only host.
If the destination board is remote, gdb_remote_download will use the
standard remote_download from DejaGnu, resulting in the file being
transferred on the remote system.
If the destination is local, gdb_remote_download will copy the file to
the standard test directory (found using standard_output_file). Tcl's
file copy seems to handle gracefully cases where the source file is the
same as the destination, so I don't think it's necessary to check for
that case ourselves, as a previous version of the patch did.
I'd prefer to keep the name gdb_download instead of gdb_remote_download,
since I don't like the fact that gdb_remote_download implies that the
destination is remote, when it's not always the case. However,
gdb_remote_download is used at many more places than gdb_download, so
it's easier to reuse that. Also, since it's a wrapper around DejaGnu's
remote_download, it might be better to keep that name. I don't know.
I ran the testsuite native, with native-gdbserver and with a
remote gdbserver, and didn't see any related failure.
gdb/testsuite/ChangeLog:
* gdb.base/jit-so.exp: Use gdb_remote_download instead of
gdb_download. Use it even if the target is not remote.
* gdb.base/jit.exp (compile_jit_test): Likewise.
* lib/gdb.exp (gdb_remote_download): Copy files to the standard
output directory if the destination board is local, otherwise use
the standard remote_download from DejaGnu.
(gdb_download): Remove.
(gdb_load_shlibs): Use gdb_remote_download instead of
gdb_download.
* lib/gdbserver-support.exp (gdbserver_download_current_prog):
Use gdb_remote_download instead of gdb_download. Use it even if
the target is not remote.
* lib/mi-support.exp (mi_load_shlibs): Use gdb_remote_download
instead of gdb_download.
This patch adds support for TYPE_CODE_ENUM values to be supplied
as right-hand side operand of the BINOP_REPEAT (@) operator. The
following should now work:
enum {
sz = 17
};
int
main ()
{
int arr[sz + 1] = { 0 };
return 0; /* line 9 here */
}
(gdb) b 9
(gdb) r
(gdb) p arr@sz
$1 = {0 <repeats 17 times>}
(gdb)
A couple of tests is also included in this patch to demonstrate that it is
working as intended.
gdb/Changelog:
2016-04-01 Artemiy Volkov <artemiyv@acm.org>
PR gdb/19820
* eval.c (evaluate_subexp_standard): Allow TYPE_CODE_ENUM to be
the type of BINOP_REPEAT's second operand.
gdb/testsuite/Changelog:
2016-04-01 Artemiy Volkov <artemiyv@acm.org>
PR gdb/19820
* gdb.base/printcmds.exp: Add artificial arrays tests.
This test would fail without the previous gdb/jit.c fix:
(gdb) attach 23031
Attaching to program: .../build/gdb/testsuite/outputs/gdb.base/jit/jit-main, process 23031
[...]
207 WAIT_FOR_GDB; i = 0; /* gdb break here 1 */
(gdb) PASS: gdb.base/jit.exp: attach: one_jit_test-2: attach
set var wait_for_gdb = 0
(gdb) PASS: gdb.base/jit.exp: attach: one_jit_test-2: set var wait_for_gdb = 0
info function ^jit_function
All functions matching regular expression "^jit_function":
(gdb) FAIL: gdb.base/jit.exp: attach: one_jit_test-2: info function ^jit_function
gdb/testsuite/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
PR gdb/19858
* gdb.base/jit-main.c: Include unistd.h.
(ATTACH): Define to 0 if not already defined.
(wait_for_gdb, mypid): New globals.
(WAIT_FOR_GDB): New macro.
(MAIN): Set an alarm. Store the process's pid. Wait for GDB at
some breakpoint locations.
* gdb.base/jit.exp (clean_reattach, continue_to_test_location):
New procedures.
(one_jit_test): Add REATTACH parameter, and handle it. Use
continue_to_test_location.
(top level): Test attach, and adjusts calls to one_jit_test.
This testcase compiles the same program and library differently
multiple times using the same file names. Make them unique, to make
it easier to debug test problems.
gdb/testsuite/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
PR gdb/19858
* gdb.base/jit.exp (compile_jit_test): Add intro comment. Add
BINSUFFIX parameter, and handle it.
(top level): Adjust calls compile_jit_test.
When adding the $_as_string convenience function, I missed a new test
failure in default.exp. The tests lists the convenience functions, so
$_as_string should be added to the expected list.
Fixes:
+FAIL: gdb.base/default.exp: show convenience ($_caller_is = <internal function _caller_is> not found)
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Add $_as_string to the list of expected
convenience functions.
Add a new command 'maint info line-table' to display the contents of
GDB's internal line table structure. Useful when trying to understand
problems (within gdb) relating to line tables.
gdb/ChangeLog:
* symmisc.c (maintenance_info_line_tables): New function.
(maintenance_print_one_line_table): New function.
(_initialize_symmisc): Register 'maint info line-table' command.
* NEWS: Mention new command.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new 'maint info line-table'
command.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: New tests for 'maint info line-table'.
I happened to break this locally and the testsuite didn't notice it.
Add some tests.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* gdb.base/command-line-input.exp: New file.
This patch adds a new test for stepping over clone syscall.
2016-03-03 Yao Qi <yao.qi@linaro.org>
* gdb.base/step-over-syscall.exp (step_over_syscall): Kfail.
Invoke step_over_syscall "clone" and break_cond_on_syscall
"clone".
* gdb.base/step-over-clone.c: New file.
disp-step-syscall.exp is extended for stepping over syscall instruction
in different cases, with or without displaced stepping, and stepping
over by GDBserver.
This patch rename disp-step-syscall.exp to step-over-syscall.exp to
reflect this.
gdb/testsuite:
2016-03-03 Yao Qi <yao.qi@linaro.org>
* gdb.base/disp-step-fork.c: Rename to ...
* gdb.base/step-over-fork.c: ... it. New file.
* gdb.base/disp-step-vfork.c: Rename to ...
* gdb.base/step-over-vfork.c: ... it. New file.
* gdb.base/disp-step-syscall.exp: Rename to ...
* gdb.base/step-over-syscall.exp: ... it. New file.
(disp_step_cross_syscall): Rename to ...
(step_over_syscall): ... it.
