Commit graph

406 commits

Author SHA1 Message Date
Nick Clifton
dd90581873 Place .shstrtab section after .symtab and .strtab, thus restoring monotonically increasing section offsets.
bfd
  * elf.c (assign_section_numbers): Assign number for the .shstrtab
  section after the symbol table and string table sections.

binutils
  * testsuite/binutils-all/readelf.s: Adjust expected ordering of
  sections.
  * testsuite/binutils-all/readelf.s-64: Likewise.

gas
  * testsuite/gas/i386/ilp32/x86-64-unwind.d: Adjust expected ordering
  of sections.
  * testsuite/gas/i386/x86-64-unwind.d: Likewise.
  * testsuite/gas/ia64/alias-ilp32.d: Likewise.
  * testsuite/gas/ia64/alias.d: Likewise.
  * testsuite/gas/ia64/group-1.d: Likewise.
  * testsuite/gas/ia64/group-2.d: Likewise.
  * testsuite/gas/ia64/secname-ilp32.d: Likewise.
  * testsuite/gas/ia64/secname.d: Likewise.
  * testsuite/gas/ia64/unwind-ilp32.d: Likewise.
  * testsuite/gas/ia64/unwind.d: Likewise.
  * testsuite/gas/ia64/xdata-ilp32.d: Likewise.
  * testsuite/gas/ia64/xdata.d: Likewise.
  * testsuite/gas/mmix/bspec-1.d: Likewise.
  * testsuite/gas/mmix/bspec-2.d: Likewise.
  * testsuite/gas/mmix/byte-1.d: Likewise.
  * testsuite/gas/mmix/loc-1.d: Likewise.
  * testsuite/gas/mmix/loc-2.d: Likewise.
  * testsuite/gas/mmix/loc-3.d: Likewise.
  * testsuite/gas/mmix/loc-4.d: Likewise.
  * testsuite/gas/mmix/loc-5.d: Likewise.
  * testsuite/gas/tic6x/scomm-directive-4.d: Likewise.

ld
  * testsuite/ld-alpha/tlsbin.rd: Adjust expected ordering of sections.
  * testsuite/ld-alpha/tlsbinr.rd: Likewise.
  * testsuite/ld-alpha/tlspic.rd: Likewise.
  * testsuite/ld-cris/libdso-2.d: Likewise.
  * testsuite/ld-i386/nogot1.d: Likewise.
  * testsuite/ld-i386/pr12718.d: Likewise.
  * testsuite/ld-i386/pr12921.d: Likewise.
  * testsuite/ld-i386/tlsbin-nacl.rd: Likewise.
  * testsuite/ld-i386/tlsbin.rd: Likewise.
  * testsuite/ld-i386/tlsbin2-nacl.rd: Likewise.
  * testsuite/ld-i386/tlsbin2.rd: Likewise.
  * testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise.
  * testsuite/ld-i386/tlsbindesc.rd: Likewise.
  * testsuite/ld-i386/tlsdesc-nacl.rd: Likewise.
  * testsuite/ld-i386/tlsdesc.rd: Likewise.
  * testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise.
  * testsuite/ld-i386/tlsgdesc.rd: Likewise.
  * testsuite/ld-i386/tlsnopic-nacl.rd: Likewise.
  * testsuite/ld-i386/tlsnopic.rd: Likewise.
  * testsuite/ld-i386/tlspic-nacl.rd: Likewise.
  * testsuite/ld-i386/tlspic.rd: Likewise.
  * testsuite/ld-i386/tlspic2-nacl.rd: Likewise.
  * testsuite/ld-i386/tlspic2.rd: Likewise.
  * testsuite/ld-ia64/tlsbin.rd: Likewise.
  * testsuite/ld-ia64/tlspic.rd: Likewise.
  * testsuite/ld-mips-elf/attr-gnu-4-10.d: Likewise.
  * testsuite/ld-mips-elf/attr-gnu-4-50.d: Likewise.
  * testsuite/ld-mips-elf/attr-gnu-4-60.d: Likewise.
  * testsuite/ld-mips-elf/attr-gnu-4-70.d: Likewise.
  * testsuite/ld-mmix/bspec1.d: Likewise.
  * testsuite/ld-mmix/bspec2.d: Likewise.
  * testsuite/ld-mmix/local1.d: Likewise.
  * testsuite/ld-mmix/local3.d: Likewise.
  * testsuite/ld-mmix/local5.d: Likewise.
  * testsuite/ld-mmix/local7.d: Likewise.
  * testsuite/ld-mmix/undef-3.d: Likewise.
  * testsuite/ld-powerpc/tlsexe.r: Likewise.
  * testsuite/ld-powerpc/tlsexe32.r: Likewise.
  * testsuite/ld-powerpc/tlsexetoc.r: Likewise.
  * testsuite/ld-powerpc/tlsso.r: Likewise.
  * testsuite/ld-powerpc/tlsso32.r: Likewise.
  * testsuite/ld-powerpc/tlstocso.r: Likewise.
  * testsuite/ld-s390/tlsbin.rd: Likewise.
  * testsuite/ld-s390/tlsbin_64.rd: Likewise.
  * testsuite/ld-s390/tlspic.rd: Likewise.
  * testsuite/ld-s390/tlspic_64.rd: Likewise.
  * testsuite/ld-sh/sh64/crange1.rd: Likewise.
  * testsuite/ld-sh/sh64/crange2.rd: Likewise.
  * testsuite/ld-sh/sh64/crange3-cmpct.rd: Likewise.
  * testsuite/ld-sh/sh64/crange3-media.rd: Likewise.
  * testsuite/ld-sh/sh64/crange3.rd: Likewise.
  * testsuite/ld-sh/sh64/crangerel1.rd: Likewise.
  * testsuite/ld-sh/sh64/crangerel2.rd: Likewise.
  * testsuite/ld-sh/tlsbin-2.d: Likewise.
  * testsuite/ld-sh/tlspic-2.d: Likewise.
  * testsuite/ld-sparc/gotop32.rd: Likewise.
  * testsuite/ld-sparc/gotop64.rd: Likewise.
  * testsuite/ld-sparc/tlssunbin32.rd: Likewise.
  * testsuite/ld-sparc/tlssunbin64.rd: Likewise.
  * testsuite/ld-sparc/tlssunnopic32.rd: Likewise.
  * testsuite/ld-sparc/tlssunnopic64.rd: Likewise.
  * testsuite/ld-sparc/tlssunpic32.rd: Likewise.
  * testsuite/ld-sparc/tlssunpic64.rd: Likewise.
  * testsuite/ld-tic6x/common.d: Likewise.
  * testsuite/ld-tic6x/shlib-1.rd: Likewise.
  * testsuite/ld-tic6x/shlib-1b.rd: Likewise.
  * testsuite/ld-tic6x/shlib-1r.rd: Likewise.
  * testsuite/ld-tic6x/shlib-1rb.rd: Likewise.
  * testsuite/ld-tic6x/shlib-app-1.rd: Likewise.
  * testsuite/ld-tic6x/shlib-app-1b.rd: Likewise.
  * testsuite/ld-tic6x/shlib-app-1r.rd: Likewise.
  * testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise.
  * testsuite/ld-tic6x/shlib-noindex.rd: Likewise.
  * testsuite/ld-tic6x/static-app-1.rd: Likewise.
  * testsuite/ld-tic6x/static-app-1b.rd: Likewise.
  * testsuite/ld-tic6x/static-app-1r.rd: Likewise.
  * testsuite/ld-tic6x/static-app-1rb.rd: Likewise.
  * testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise.
  * testsuite/ld-x86-64/ilp32-4.d: Likewise.
  * testsuite/ld-x86-64/nogot1.d: Likewise.
  * testsuite/ld-x86-64/pr12718.d: Likewise.
  * testsuite/ld-x86-64/pr12921.d: Likewise.
  * testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise.
  * testsuite/ld-x86-64/split-by-file.rd: Likewise.
  * testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise.
  * testsuite/ld-x86-64/tlsbin.rd: Likewise.
  * testsuite/ld-x86-64/tlsbin2-nacl.rd: Likewise.
  * testsuite/ld-x86-64/tlsbin2.rd: Likewise.
  * testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise.
  * testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
  * testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise.
  * testsuite/ld-x86-64/tlsdesc.rd: Likewise.
  * testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise.
  * testsuite/ld-x86-64/tlsgdesc.rd: Likewise.
  * testsuite/ld-x86-64/tlspic-nacl.rd: Likewise.
  * testsuite/ld-x86-64/tlspic.rd: Likewise.
  * testsuite/ld-x86-64/tlspic2-nacl.rd: Likewise.
  * testsuite/ld-x86-64/tlspic2.rd: Likewise.
  * testsuite/ld-xtensa/tlsbin.rd: Likewise.
  * testsuite/ld-xtensa/tlspic.rd: Likewise.
2016-08-19 09:16:30 +01:00
Claudiu Zissulescu
37fd5ef3ec Add support to the ARC disassembler for selecting instruction classes.
gas	* testsuite/gas/arc/dsp.d: New file.
	* testsuite/gas/arc/dsp.s: Likewise.
	* testsuite/gas/arc/fpu.d: Likewise.
	* testsuite/gas/arc/fpu.s: Likewise.
	* testsuite/gas/arc/ext2op.d: Add specific disassembler option.
	* testsuite/gas/arc/ext3op.d: Likewise.
	* testsuite/gas/arc/tdpfp.d: Likewise.
	* testsuite/gas/arc/tfpuda.d: Likewise.

opcodes	* arc-dis.c (skipclass): New structure.
	(decodelist): New variable.
	(is_compatible_p): New function.
	(new_element): Likewise.
	(skip_class_p): Likewise.
	(find_format_from_table): Use skip_class_p function.
	(find_format): Decode first the extension instructions.
	(print_insn_arc): Select either ARCEM or ARCHS based on elf
	e_flags.
	(parse_option): New function.
	(parse_disassembler_options): Likewise.
	(print_arc_disassembler_options): Likewise.
	(print_insn_arc): Use parse_disassembler_options function.  Proper
	select ARCv2 cpu variant.
	* disassemble.c (disassembler_usage): Add ARC disassembler
	options.

binutils* doc/binutils.texi (objdump): Add ARC disassembler options.
	* testsuite/binutils-all/arc/dsp.s: New file.
	* testsuite/binutils-all/arc/objdump.exp: Likewise.

include	* dis-asm.h: Declare print_arc_disassembler_options.
2016-07-20 17:08:07 +01:00
Alan Modra
003c15c9fd Use address sized relocs in remove-relocs-01.s
Fixes failures on alpha, ia64, mcore, metag, moxie, and pj due to lack
of 16-bit relocs.

	* testsuite/binutils-all/remove-relocs-01.s: Use .dc.a, not .word.
2016-07-15 17:02:20 +09:30
Andrew Burgess
d3e5f6c8f1 objcopy/strip: Add option --remove-relocations=SECTIONPATTERN
The objcopy and strip tools make use of the bfd library to manipulate
the state of the input file (to produce an output file).  Within the
input file (for ELF at least), relocations are held within a section,
and so, if the user wanted to remove the relocations, but keep the
section to which the relocations would have been applied, it is tempting
to think that specifying the name of a relocation section to objcopy's
--remove-section option might do what you want, for example:

   objcopy --remove-section=.rela.text input.elf output.elf

However, this does not work.  The reason is that when the input file is
loaded, relocations are not managed as sections, but are, instead,
loaded as data associated with the section to which the relocations
would be applied.  In our example above the relocations in '.rela.text'
are held as data on the section '.text' once 'input.elf' is loaded.

One task that objcopy and strip do is copy the relocations from the
input file to the output file if the section is also being copied from
the input file to the output file.

This commit adds a new command line option for objcopy and strip,
--remove-relocations, which can be used to remove the relocations, while
keeping the section that the relocations would have been applied to, for
example:

    objcopy --remove-relocations=.text input.elf output.elf

in this case the section '.text' will appear in both 'input.elf' and
'output.elf', but any relocations in 'input.elf' that apply to '.text'
will not be present in 'output.elf'.

I have also added a special case to the handling of --remove-section
that spots if a user tries to remove a relocation section (currently
this is done by spotting the '.rela.' or '.rel.' prefix) and forwards
the request to --remove-relocations.

As with --remove-section and --only-section the --remove-relocations
option supports the '!' prefix on the section-patterns it takes to allow
for sections to be specifically not matched.

There are tests for all the new functionality.

binutils/ChangeLog:

	* doc/binutils.texi (objcopy): Document 'remove-relocations'.
	(strip): Likewise.
	* objcopy.c (SECTION_CONTEXT_REMOVE_RELOCS): Define.
	(enum command_line_switch): Add 'OPTION_REMOVE_RELOCS'.
	(struct option strip_options): Add 'remove-relocations'.
	(struct option copy_options): Likewise.
	(copy_usage): Likewise.
	(strip_usage): Likewise.
	(handle_remove_relocations_option): New function.
	(discard_relocations): New function.
	(handle_remove_section_option): New function.
	(copy_relocations_in_section): Use discard_relocations.
	(strip_main): Use handle_remove_section_option for
	'remove-section', and handle 'remove-relocations' option.
	(copy_main): Likewise.
	* testsuite/binutils-all/objcopy.exp: Run new tests.
	* testsuite/binutils-all/remove-relocs-01.d: New file.
	* testsuite/binutils-all/remove-relocs-01.s: New file.
	* testsuite/binutils-all/remove-relocs-02.d: New file.
	* testsuite/binutils-all/remove-relocs-03.d: New file.
	* testsuite/binutils-all/remove-relocs-04.d: New file.
	* testsuite/binutils-all/remove-relocs-05.d: New file.
	* testsuite/binutils-all/remove-relocs-06.d: New file.
2016-07-14 11:34:10 +01:00
Andrew Burgess
e511c9b19f objcopy/strip: Allow section patterns starting with '!'.
For symbol matching, prefixing a pattern with '!' will indicate a
non-matching pattern, however, this is not the case for section
patterns.  As a result it is not possible to say "apply this action to
all sections except ...".

With this commit the objcopy and strip tools now support '!' prefix for
section patterns, so we can say:

  objcopy --remove-section="*" --remove-section="!.text*"

Which will remove all sections, except those matching the pattern
'.text*'.

binutils/ChangeLog:

	* objcopy.c (find_section_list): Handle section patterns starting
	with '!' being a non-matching pattern.
	* doc/binutils.texi (objcopy): Give example of using '!' with
	--remove-section and --only-section.
	(strip): Give example of using '!' with --remove-section.
	* testsuite/binutils-all/data-sections.s: New file.
	* testsuite/binutils-all/only-section-01.d: New file.
	* testsuite/binutils-all/remove-section-01.d: New file.
	* testsuite/binutils-all/objcopy.exp: Run new tests.
	* NEWS: Mention new feature.
2016-07-14 11:32:48 +01:00
Nick Clifton
41699fa4a2 Expect the objcopy without global symbols test to fail for ARM and AArch64 targets.
* testsuite/binutils-all/objcopy.exp
	(objcopy_test_without_global_symbol): Expect this test to fail on
	the AArch64 and ARM targets, since they preserve their mapping
	symbols.
2016-07-01 10:34:08 +01:00
Nick Clifton
50c901ede9 Relax previous restriction on running binutils ar tests for Alpha targets, allowing the tests to be run for ELF variants.
* testsuite/binutils-all/ar.exp: Relax previous restriction on
	Alpha targets.  Allow ELF based Alpha targets.
2016-06-28 14:05:34 +01:00
Maciej W. Rozycki
eb9bb5b4ec Use supports_gnu_unique' with the unique_symbol' and `type' tests
Complement commit a43942db49 ("LD/ELF: Unify STB_GNU_UNIQUE handling")
and use `supports_gnu_unique' with the `unique_symbol' and `type' tests,
fixing failures like:

.../binutils/testsuite/binutils-all/unique.s: Assembler messages:
.../binutils/testsuite/binutils-all/unique.s:2: Error: symbol type "gnu_unique_object" is supported only by GNU targets

ERROR: .../binutils/testsuite/binutils-all/unique.s: assembly failed
UNRESOLVED: ar unique symbol in archive
.../binutils/ar -s -r -c tmpdir/artest.a tmpdir/unique.o
Executing on host: .../binutils/ar -s -r -c tmpdir/artest.a tmpdir/unique.o   (timeout = 300)
.../binutils/ar: tmpdir/unique.o: No such file or directory

FAIL: ar unique symbol in archive

and:

.../gas/testsuite/gas/elf/type.s: Assembler messages:
.../gas/testsuite/gas/elf/type.s:30: Error: symbol type "gnu_unique_object" is supported only by GNU targets
../as-new: BFD (GNU Binutils) 2.26.51.20160628 internal error, aborting at .../gas/write.c:608 in size_seg

../as-new: Please report this bug.

.../gas/testsuite/../../binutils/readelf -s dump.o | grep "1 *\[FIONTCU\]" > dump.out
Executing on host: sh -c {.../gas/testsuite/../../binutils/readelf -s dump.o >readelf.out 2>gas.stderr}  /dev/null  (timeout = 300)
readelf: Error: dump.o: Failed to read file's magic number
FAIL: elf type list

on MIPS/FreeBSD targets:

mips-freebsd  -FAIL: ar unique symbol in archive
mips-freebsd  -FAIL: elf type list
mips64-freebsd  -FAIL: ar unique symbol in archive
mips64-freebsd  -FAIL: elf type list
mips64el-freebsd  -FAIL: ar unique symbol in archive
mips64el-freebsd  -FAIL: elf type list
mipsel-freebsd  -FAIL: ar unique symbol in archive
mipsel-freebsd  -FAIL: elf type list

	binutils/
	* testsuite/binutils-all/ar.exp: Use `supports_gnu_unique' with
	the `unique_symbol' test.

	gas/
	* testsuite/gas/elf/elf.exp: Use `supports_gnu_unique' with the
	`type' test.
2016-06-28 13:54:00 +01:00
Alan Modra
9cc0123fea MIPS objcopy --rename-section fix
Some MIPS targets use a named section symbol rather than a symbol with
no name as is used with most ELF targets.  When renaming sections, the
named section symbol needs to be renamed too.

Rather than fix this bug, I'd originally intended to just correct the
xfail added recently for update-1.o vs update4.o in update-section.exp,
using the same set of targets for the localize-hidden-1 mips xfail.
I'd extracted that target test into a new function, is_bad_symtab.  It
turns out to be useful in readelf.exp too.

bfd/
	* config.bfd: Delete mips vxworks patterns matched earlier.
	Combine mips*-*-none with mips*-*-elf*.
binutils/
	* objcopy.c (find_section_rename): Forward declare.  Remove
	ibfd and sec_ptr param.  Add old_name param.  Allow for NULL
	returned_flags.  Move read of section name and flags to..
	(setup_section): ..here.  Update find_section_rename call.
	(filter_symbols): Rename section symbols for renamed sections.
	(copy_object): Call filter_symbols when renamed sections.
	* testsuite/lib/binutils-common.exp (is_bad_symtab): New.
	* testsuite/binutils-all/update-section.exp: Revert 96037eb0
	mips xfail.
	* testsuite/binutils-all/objcopy.exp (copy_executable): Use
	is_bad_symtab.
	(localize-hidden-1): xfail if is_bad_symtab.
	* testsuite/binutils-all/readelf.exp: Use is_bad_symtab to select
	between mips/tmips.
2016-06-24 23:26:29 +09:30
Nick Clifton
96037eb0b8 Fix various binutils testsuite failures.
* testsuite/binutils-all/ar.exp: Skip tests for Alpha target.
	Skip bfdtest1 tests for tic30 target.
	* testsuite/binutils-all/arm/objdump.exp: Skip for aout arm
	target.
	* testsuite/binutils-all/compress.exp: Expect some tests to fail
	on the nds32.
	* testsuite/binutils-all/copy-3.d: Skip for go32 targets.
	* testsuite/binutils-all/copy-4.d: Skip for AIX and linuxecoff
	targets.
	* testsuite/binutils-all/nm.exp: Treat beos based targets as ELF
	targets.
	* testsuite/binutils-all/objcopy.exp: Only run reverse bytes tests
	if the bintest.o file was created.  Use the
	get_standard_section_names proc to get the name of the data
	section.
	* testsuite/binutils-all/objdump.exp: Update regexps to allow for
	RX section names.
	* testsuite/binutils-all/readelf.exp: Use
	get_standard_section_names proc to get the name of the data
	section.
	* testsuite/binutils-all/readelf.r: Allow for non standard text
	section names.
	* testsuite/binutils-all/readelf.s: Update regexps for tilepro.
	* testsuite/binutils-all/size.exp: Allow for non standard section
	names.
	* testsuite/binutils-all/update-section.exp: Expect comapre 1vs4
	to fail on mips targets.
	* testsuite/lib/utils-lib.exp (default_binutils_run): Use
	get_standard_section_names proc.
	(run_dump_test): Likewise.
	(proc get_standard_section_names): New proc.
2016-06-22 14:42:26 +01:00
Maciej W. Rozycki
1401d2fe67 MIPS/opcodes: Correct mixed MIPS16 and microMIPS disassembly
Mixing MIPS16 and microMIPS code in a single binary isn't usually
supported but GAS happily produces such code if requested.  However it
is not correctly disassembled even if a symbol table is available and
function symbols are correctly anotated with the ISA mode.  This is
because the ELF-header global microMIPS ASE flag takes precedence over
MIPS16 function annotation, causing them to be treated as regular MIPS
code.

Correct the problem by respecting function symbol anotation regardless
of the ELF-header flag.

	binutils/
	* testsuite/binutils-all/mips/mixed-mips16-micromips.d: New test.
	* testsuite/binutils-all/mips/mixed-mips16-micromips.s: New test
	source.
	* testsuite/binutils-all/mips/mips.exp: Run the new test.

	opcodes/
	* mips-dis.c (is_compressed_mode_p): Add `micromips_p' operand,
	replacing references to `micromips_ase' throughout.
	(_print_insn_mips): Don't use file-level microMIPS annotation to
	determine the disassembly mode with the symbol table.
2016-05-18 13:07:24 +01:00
Maciej W. Rozycki
a43942db49 LD/ELF: Unify STB_GNU_UNIQUE handling
Take STB_GNU_UNIQUE handling scattered across targets and gather it in
the generic ELF linker.  Update test suite infrastructure accordingly.

	bfd/
	* elf-s390-common.c (elf_s390_add_symbol_hook): Remove
	STB_GNU_UNIQUE handling.
	* elf32-arc.c (elf_arc_add_symbol_hook): Likewise.
	* elf32-arm.c (elf32_arm_add_symbol_hook): Likewise.
	* elf32-m68k.c (elf_m68k_add_symbol_hook): Likewise.
	* elf32-ppc.c (ppc_elf_add_symbol_hook): Likewise.
	* elf32-sparc.c (elf32_sparc_add_symbol_hook): Likewise.
	* elf64-ppc.c (ppc64_elf_add_symbol_hook): Likewise.
	* elf64-sparc.c (elf64_sparc_add_symbol_hook): Likewise.
	* elf64-x86-64.c (elf_x86_64_add_symbol_hook): Likewise.
	* elfxx-aarch64.c (_bfd_aarch64_elf_add_symbol_hook): Likewise.
	* elfxx-mips.c (_bfd_mips_elf_add_symbol_hook): Likewise.
	* elf32-i386.c (elf_i386_add_symbol_hook): Remove function.
	(elf_backend_add_symbol_hook): Remove macro.
	* elflink.c (elf_link_add_object_symbols): Set `has_gnu_symbols'
	for STB_GNU_UNIQUE symbols.

	binutils/
	* testsuite/lib/binutils-common.exp (supports_gnu_unique): New
	procedure.
	* testsuite/binutils-all/objcopy.exp: Use `supports_gnu_unique'
	with the `strip-10' test.

	ld/
	* testsuite/ld-unique/unique.exp: Use `is_elf_format' and
	`supports_gnu_unique' to qualify testing.
2016-05-17 12:21:40 +01:00
Maciej W. Rozycki
71de341392 V850/BFD: Call `_bfd_elf_copy_private_bfd_data' again
Correct a regression introduced with commit 685080f210 ("Adds support
for generating notes in V850 binaries.") which replaced rather than
extending the call to `_bfd_elf_copy_private_bfd_data' with
`v850_elf_copy_private_bfd_data'.  Consequently ELFOSABI_GNU marking is
not propagated to output by `objcopy' from objects containing
STB_GNU_UNIQUE symbols.

	bfd/
	* elf32-v850.c (v850_elf_copy_notes): New function, factored out
	from...
	(v850_elf_copy_private_bfd_data): ... here.  Call the new
	function and `_bfd_elf_copy_private_bfd_data'.

	binutils/
	* testsuite/binutils-all/objcopy.exp: Don't skip the `strip-10'
	test for the V850.
2016-05-16 13:31:20 +01:00
Senthil Kumar Selvaraj
4a85cc0925 Fix some AVR test failures.
binutils* testsuite/lib/binutils-common.exp (is_elf_format): Add avr-*-*.

ld	* testsuite/ld-elf/pr18735.d: Allow other symbols.
	* testsuite/ld-elf/sec64k.exp: Skip 64ksec for avr.
	* testsuite/ld-gc/pr14265.d: Allow other symbols.
	* testsuite/ld-plugin/plugin.exp: Add PR ld/17973 to
	plugin_tests only if check_shared_lib_support is true.
	* testsuite/ld-selective/selective.exp: Add --section-start
	flag for avr.
2016-05-04 13:03:52 +01:00
Nick Clifton
4bd13cde17 Add support to AArch64 disassembler for verifying instructions. Add verifier for LDPSW.
PR target/19722
opcodes	* aarch64-dis.c (aarch64_opcode_decode): Run verifier if present.
	* aarch64-opc.c (verify_ldpsw): New function.
	* aarch64-opc.h (verify_ldpsw): New prototype.
	* aarch64-tbl.h: Add initialiser for verifier field.
	(LDPSW): Set verifier to verify_ldpsw.

binutils* testsuite/binutils-all/aarch64/illegal.s: New test.
	* testsuite/binutils-all/aarch64/illegal.d: New test driver.

include	* opcode/aarch64.h (struct aarch64_opcode): Add verifier field.
2016-04-28 09:11:03 +01:00
Nick Clifton
8486501545 Fix copying Solaris binaries with objcopy.
PR target/19938
bfd	* elf-bbfd.h (struct elf_backend_data): New field:
	elf_strtab_flags.
	New field: elf_backend_set_special_section_info_and_link
	* elfxx-target.h (elf_backend_strtab_flags): Define if not already
	defined.
	(elf_backend_set_special_section_info_and_link): Define if not
	already defined.
	(elfNN_bed): Use elf_backend_set_special_section_info_and_link and
	elf_backend_strtab_flags macros to initialise fields in structure.
	* elf.c (_bfd_elf_make_section_from_shdr): Check for SHF_STRINGS
	being set even if SHF_MERGE is not set.
	(elf_fake_sections): Likewise.
	(section_match): New function.  Matches two ELF sections based
	upon fixed characteristics.
	(find_link): New function.  Locates a section in a BFD that
	matches a section in a different BFD.
	(_bfd_elf_copy_private_bfd_data): Copy the sh_info and sh_link
	fields of reserved sections.
	(bfd_elf_compute_section_file_positions): Set the flags for the
	.shstrtab section based upon the elf_strtab_flags field in the
	elf_backend_data structure.
	(swap_out_syms): Likewise for the .strtab section.
	* elflink.c (bfd_elf_final_link): Set the flags for the
	.strtab section based upon the elf_strtab_flags field in the
	elf_backend_data structure.
	* elf32-i386.c (elf32_i386_set_special_info_link): New function.
	(elf_backend_strtab_flags): Set to SHF_STRINGS for Solaris
	targets.
	(elf_backend_set_special_section_info_and_link): Define for
	Solaris targets.
	* elf32-sparc.c: Likewise.
	* elf64-x86-64.c: Likewise.

binutils* testsuite/binutils-all/i386/compressed-1b.d: Allow for the
	string sections possibly having the SHF_STRINGS flag bit set.
	* testsuite/binutils-all/i386/compressed-1c.d: Likewise.
	* testsuite/binutils-all/readelf.s: Likewise.
	* testsuite/binutils-all/readelf.s-64: Likewise.
	* testsuite/binutils-all/x86-64/compressed-1b.d: Likewise.
	* testsuite/binutils-all/x86-64/compressed-1c.d: Likewise.

gas	* testsuite/gas/i386/ilp32/x86-64-unwind.d: Allow for the string
	sections possibly having the SHF_STRINGS flag bit set.
	* testsuite/gas/i386/x86-64-unwind.d: Likewise.
2016-04-14 12:04:09 +01:00
Maciej W. Rozycki
92708ceca5 MIPS/opcodes: Fix undecoded MIPS16 extended instruction bit disassembly
Correct the disassembly of hardware don't cares in MIPS16 extended
instructions.  Rather than e.g.:

   0:	f008 0231 	addiu	v0,sp,16433
   4:	f520 3260 	sll	v0,v1,-12

print:

   0:	f008 0231 	addiu	v0,sp,16401
   4:	f520 3260 	sll	v0,v1,20

respectively instead.

	opcodes/
	* mips-dis.c (print_mips16_insn_arg): Mask unused extended
	instruction bits out.

	binutils/
	* testsuite/binutils-all/mips/mips16-undecoded.d: New test.
	* testsuite/binutils-all/mips/mips16-undecoded.s: New test
	source.
	* testsuite/binutils-all/mips/mips.exp: Run the new test.
2016-04-11 18:01:18 +01:00
Andrew Burgess
24740d83e4 arc/gas: default mach is arc700, initialised in md_begin
This commit restructures the selection of the default cpu/mach so that
the choice is made from md_begin (if the user has not provided a command
line choice).  This will reduce the amount of change needed in a later
patch.

At the request of Synopsys, the default architecture changes to ARC700
from this commit, previously the default was a non-existent
super-architecture that contained all instructions from all arc
variants.  There's some clean up associated with removing the default
merged architecture, and a small test fix now that the default is
ARC700.

binutils/ChangeLog:

	* testsuite/binutils-all/objdump.exp (cpus_expected): Add ARC700
	to the architecture list.

gas/ChangeLog:

	* config/tc-arc.c (arc_target): Delay initialisation until
	arc_select_cpu.
	(arc_target_name): Likewise.
	(arc_features): Likewise.
	(arc_mach_type): Likewise.
	(cpu_types): Remove "all" entry.
	(arc_select_cpu): New function, most of the content is from...
	(md_parse_option): ... here.  Call new arc_select_cpu.
	(md_begin): Call arc_select_cpu if needed, default is now arc700.

include/ChangeLog:

	* opcode/arc.h (ARC_OPCODE_BASE): Delete.

opcodes/ChangeLog:

	* arc-opc.c (BASE): Delete.
2016-03-21 16:44:49 +00:00
Nick Clifton
4fc874242f Allow zero length archive elements.
bfd	PR binutils/19775
	* archive.c (bfd_generic_openr_next_archived_file): Allow zero
	length elements in the archive.

binutils PR binutils/19775
	* testsuite/binutils-all/ar.exp (proc empty_archive): New proc.
	Run the new proc.
	* testsuite/binutils-all/empty: New, empty, file.
2016-03-07 17:29:25 +00:00
H.J. Lu
b8871f357f Properly implement STT_COMMON
The BFD configure option, --enable-elf-stt-common, can't be to used to
verify STT_COMMON implementation with the normal binutils build.  Instead,
this patch removes it from BFD.  It adds --elf-stt-common=[no|yes] to ELF
assembler/objcopy and adds -z common/-z nocommon to ld.

A configure option, --enable-elf-stt-common, is added to gas to specify
whether ELF assembler should generate common symbols with the STT_COMMON
type by default.

Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF
common symbols.

bfd/

	PR ld/19645
	* bfd.c (bfd): Change flags to 20 bits.
	(BFD_CONVERT_ELF_COMMON): New.
	(BFD_USE_ELF_STT_COMMON): Likewise.
	(BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and
	BFD_USE_ELF_STT_COMMON.
	(BFD_FLAGS_FOR_BFD_USE_MASK): Likewise.
	* configure.ac: Remove --enable-elf-stt-common.
	* elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for
	common symbol depending on BFD_CONVERT_ELF_COMMON and
	BFD_USE_ELF_STT_COMMON.
	* elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for
	STT_COMMON.
	* elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check
	STT_COMMON.
	(elf_link_convert_common_type): New function.
	(elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for
	common symbol depending on BFD_CONVERT_ELF_COMMON and
	BFD_USE_ELF_STT_COMMON.  Set sym.st_info after sym.st_shndx.
	* elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON
	and BFD_USE_ELF_STT_COMMON to object_flags.
	(TARGET_LITTLE_SYM): Likewise.
	* syms.c (BSF_KEEP_G): Renamed to ...
	(BSF_ELF_COMMON): This.
	* bfd-in2.h: Regenerated.
	* config.in: Likewise.
	* configure: Likewise.

binutils/

	PR ld/19645
	* NEWS: Mention --elf-stt-common= for objcopy.
	* doc/binutils.texi: Document --elf-stt-common= for objcopy.
	* objcopy.c (do_elf_stt_common): New.
	(command_line_switch): Add OPTION_ELF_STT_COMMON.
	(copy_options): Add --elf-stt-common=.
	(copy_usage): Add --elf-stt-common=.
	(copy_object): Also check do_elf_stt_common for ELF targets.
	(copy_file): Handle do_elf_stt_common.
	(copy_main): Handle OPTION_ELF_STT_COMMON.
	* readelf.c (apply_relocations): Support STT_COMMON.
	* testsuite/binutils-all/common-1.s: New file.
	* testsuite/binutils-all/common-1a.d: Likewise.
	* testsuite/binutils-all/common-1b.d: Likewise.
	* testsuite/binutils-all/common-1c.d: Likewise.
	* testsuite/binutils-all/common-1d.d: Likewise.
	* testsuite/binutils-all/common-1e.d: Likewise.
	* testsuite/binutils-all/common-1f.d: Likewise.
	* testsuite/binutils-all/common-2.s: Likewise.
	* testsuite/binutils-all/common-2a.d: Likewise.
	* testsuite/binutils-all/common-2b.d: Likewise.
	* testsuite/binutils-all/common-2c.d: Likewise.
	* testsuite/binutils-all/common-2d.d: Likewise.
	* testsuite/binutils-all/common-2e.d: Likewise.
	* testsuite/binutils-all/common-2f.d: Likewise.
	* testsuite/binutils-all/objcopy.exp
	(objcopy_test_elf_common_symbols): New proc.
	Run objcopy_test_elf_common_symbols for ELF targets

gas/

	PR ld/19645
	* NEWS: Mention --enable-elf-stt-common and --elf-stt-common=
	for ELF assemblers.
	* as.c (flag_use_elf_stt_common): New.
	(show_usage): Add --elf-stt-common=.
	(option_values): Add OPTION_ELF_STT_COMMON.
	(std_longopts): Add --elf-stt-common=.
	(parse_args): Handle --elf-stt-common=.
	* as.h (flag_use_elf_stt_common): New.
	* config.in: Regenerated.
	* configure: Likewise.
	* configure.ac: Add --enable-elf-stt-common and define
	DEFAULT_GENERATE_ELF_STT_COMMON.
	* gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON
	and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set.
	* doc/as.texinfo: Document --elf-stt-common=.
	* testsuite/gas/elf/common3.s: New file.
	* testsuite/gas/elf/common3a.d: Likewise.
	* testsuite/gas/elf/common3b.d: Likewise.
	* testsuite/gas/elf/common4.s: Likewise.
	* testsuite/gas/elf/common4a.d: Likewise.
	* testsuite/gas/elf/common4b.d: Likewise.
	* testsuite/gas/i386/dw2-compress-3b.d: Likewise.
	* testsuite/gas/i386/dw2-compressed-3b.d: Likewise.
	* testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a
	and common4b.
	* testsuite/gas/i386/dw2-compress-3.d: Renamed to ...
	* testsuite/gas/i386/dw2-compress-3a.d: This.  Pass
	--elf-stt-common=no to as.
	* testsuite/gas/i386/dw2-compressed-3.d: Renamed to ...
	* testsuite/gas/i386/dw2-compressed-3a.d: This.  Pass
	--elf-stt-common=no to as.
	* testsuite/gas/i386/i386.exp: Run dw2-compress-3a,
	dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead
	of dw2-compress-3 and dw2-compressed-3.

include/

	PR ld/19645
	* bfdlink.h (bfd_link_elf_stt_common): New enum.
	(bfd_link_info): Add elf_stt_common.

ld/

	PR ld/19645
	* NEWS: Mention -z common/-z nocommon for ELF targets.
	* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle
	-z common and -z nocommon.
	* ld.texinfo: Document -z common/-z nocommon.
	* lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon.
	* testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and
	--elf-stt-common=yes with assembler.
	* testsuite/ld-elfcomm/common-1.s: New file.
	* testsuite/ld-elfcomm/common-1a.d: Likewise.
	* testsuite/ld-elfcomm/common-1b.d: Likewise.
	* testsuite/ld-elfcomm/common-1c.d: Likewise.
	* testsuite/ld-elfcomm/common-1d.d: Likewise.
	* testsuite/ld-elfcomm/common-1e.d: Likewise.
	* testsuite/ld-elfcomm/common-1f.d: Likewise.
	* testsuite/ld-elfcomm/common-2.s: Likewise.
	* testsuite/ld-elfcomm/common-2a.d: Likewise.
	* testsuite/ld-elfcomm/common-2b.d: Likewise.
	* testsuite/ld-elfcomm/common-2c.d: Likewise.
	* testsuite/ld-elfcomm/common-2d.d: Likewise.
	* testsuite/ld-elfcomm/common-2e.d: Likewise.
	* testsuite/ld-elfcomm/common-2f.d: Likewise.
	* testsuite/ld-elfcomm/common-3a.rd: Likewise.
	* testsuite/ld-elfcomm/common-3b.rd: Likewise.
	* testsuite/ld-i386/pr19645.d: Likewise.
	* testsuite/ld-i386/pr19645.s: Likewise.
	* testsuite/ld-x86-64/largecomm-1.s: Likewise.
	* testsuite/ld-x86-64/largecomm-1a.d: Likewise.
	* testsuite/ld-x86-64/largecomm-1b.d: Likewise.
	* testsuite/ld-x86-64/largecomm-1c.d: Likewise.
	* testsuite/ld-x86-64/largecomm-1d.d: Likewise.
	* testsuite/ld-x86-64/largecomm-1e.d: Likewise.
	* testsuite/ld-x86-64/largecomm-1f.d: Likewise.
	* testsuite/ld-x86-64/pr19645.d: Likewise.
	* testsuite/ld-x86-64/pr19645.s: Likewise.
	* testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes
	with assembler.
	(assembler_generates_commons): Removed.
	Run -z common/-z nocommon tests.  Run *.d tests.
	* testsuite/ld-i386/i386.exp: Run pr19645.
	* testsuite/ld-x86-64/x86-64.exp: Likewise.
	* testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with
	assembler.  Test STT_COMMON with readelf.
2016-02-26 05:01:34 -08:00
Cupertino Miranda
bdbca4e6f8 Change the default architecture value for ARC bfds so that they have the lowest possible value, and hence can be merged with other ARC binaries wihtout changing their architecture value.
bfd	* cpu-arc.c: Change default archure from bfd_mach_arc_arcv2
	to bfd_mach_arc_arc600.

binutils * testsuite/binutils-all/objdump.exp: Update expected default
	architecture value for ARC binaries.
2016-02-05 09:58:01 +00:00
H.J. Lu
14f2c699dd Clear HAS_RELOC if there are no relocations
The HAS_RELOC bit should be cleared when relocations are removed from
relocatable files.

bfd/

	PR binutils/19547
	* elf.c (assign_section_numbers): Clear HAS_RELOC if there are
	no relocations in relocatable files.

binutils/

	PR binutils/19547
	* testsuite/binutils-all/objcopy.exp
	(objcopy_test_without_global_symbol): New proc.
	Run objcopy_test_without_global_symbol.
	* testsuite/binutils-all/pr19547.c: New file.
2016-02-02 03:30:48 -08:00
H.J. Lu
bf150a0bad Set BFD_DECOMPRESS to decompress debug sections
We should set BFD_DECOMPRESS to decompress debug sections when reading in
DWARF debug sections.

bfd/

	PR binutils/19523
	* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Set BFD_DECOMPRESS to
	decompress debug sections.

binutils/

	PR binutils/19523
	* Makefile.am (check-DEJAGNU): Pass CC and CC_FOR_BUILD to
	runtest.
	* Makefile.in: Regenerated.
	* testsuite/binutils-all/compress.exp (test_gnu_debuglink): New
	proc.
	Run test_gnu_debuglink for native ELF build.
2016-01-28 13:29:53 -08:00
Nick Clifton
0398b8d6c8 Fix dlltool tests for ARM targets, which do not support the --leading-underscore option.
PR 19495
	* testsuite/binutils-all/dlltool.exp: Fix tests for targets which
	do not support inserting leading underscores.
2016-01-20 14:52:33 +00:00
Alan Modra
b3066ae825 m68hc11/12 and xgate config.sub weirdness
Oddly, config.sub converts a duple ending in -elf for these target to
-unknown-none, which means they aren't seen as elf targets by
binutils.  So, counter that.  This exposes a number of testsuite
issues (ones you would have seen if configuring with a full triple,
say m68hc11-unknown-elf).

binutils/
	* testsuite/lib/binutils-common.exp (is_elf_format): Return true
	for m68hc11/12 and xgate triples.
gas/
	* testsuite/gas/cfi/cfi.exp: Exclude m68hc11/12 from m68k test.
ld/
	* testsuite/lib/ld-lib.exp (check_shared_lib_support): Exclude xgate.
	* testsuite/ld-elf/endsym.d: xfail m68hc11/12 and xgate.
	* testsuite/ld-elf/pr14156a.d: Likewise.
	* testsuite/ld-elf/pr14926.d: Don't run for m68hc11/12 and xgate.
	* testsuite/ld-elf/sec64k.exp: Likewise.
2016-01-17 12:13:43 +10:30
Alan Modra
6f2750feaf Copyright update for binutils 2016-01-01 23:00:01 +10:30
Alan Modra
4120fa118f binutils ChangeLog rotation 2016-01-01 22:59:17 +10:30
Alan Modra
331e61312e Fix assorted ChangeLog errors 2015-12-30 11:44:35 +10:30
Andrew Burgess
42bcef4ad6 objdump: Handle 32-bit base address in debug_ranges / debug_loc.
When the DWARF address size is 32-bit, but the host machine is 64-bit,
objdump fails to spot base addresses specified in the .debug_ranges and
.debug_loc lists.

As an example, here is the output when dumping an example .debug_ranges
section with the pre-patched objdump:

    Contents of the .debug_ranges section:

        Offset   Begin    End
        00000000 ffffffff 00000004 (start > end)
        00000000 00000000 00000004
        00000000 ffffffff 00000008 (start > end)
        00000000 00000000 00000004
        00000000 <End of list>

And this is what the same section looks like when dumped with the
patched version of objdump:

    Contents of the .debug_ranges section:

        Offset   Begin    End
        00000000 ffffffff 00000004 (base address)
        00000000 00000004 00000008
        00000000 ffffffff 00000008 (base address)
        00000000 00000008 0000000c
        00000000 <End of list>

binutils/ChangeLog:

	* dwarf.c (is_max_address): New function.
	(display_loc_list): Remove out of date comment, use
	is_max_address.
	(display_debug_ranges): Likewise.

binutils/testsuite/ChangeLog:

	* binutils-all/objdump.exp: Add test for .debug_ranges decode.
	* binutils-all/dw2-ranges.S: New file.
	* binutils-all/dw2-ranges.W: New file.
2015-11-30 13:28:26 +00:00
Alan Modra
8b89121d44 Run add-symbol test on mips
* binutils-all/add-symbol.d: Run test on mips.  Support either
	order of NEW and NEWDATA symbols.
2015-10-22 12:49:17 +10:30
Ronald Hoogenboom
397dd9a522 Fix typo in spelling of author's name. 2015-10-21 16:20:02 +01:00
Ronald Hoogenbllon
2b35fb28f3 Add ability for objcopy to insert new symbols into a binary.
PR binutils/19104
binutils * objcopy.c (command_line_switch): Add OPTION_ADD_SYMBOL.
	(copy_options): Add add-symbol.
	(copy_usage): Likewise.
	(parse_symflags): New function.
	(need_sym_before): New function.
	(create_new_symbol): New function.
	(filter_symbols): Add code to insert new symbols.
	(copy_main): Process OPTION_ADD_SYMBOL.
	* doc/binutils.texi: Document new feature.
	* NEWS: Add note about the new feature.

tests	* binutils-all/add-symbol.d: New test.
	* binutils-all/objcopy.exp: Run the new test.
2015-10-21 15:16:35 +01:00
Alan Modra
21c40443ce binutils objcopy test tidy
The main aim of this patch is to perform more objcopy tests when we
can build executables but not run them.  ie. non-native with cross
compiler available.

	* binutils-all/objcopy.exp: Delete trailing whitespace.  Use
	"string equal" rather than "string match" when making simple
	string comparisons.  Revert 2008-07-08 host_triplet checks.
	Perform non-run tests when we can build executable.
	(strip_executable, strip_executable_with_saving_a_symbol): Move
	run test later.  Take extra param on whether to perform run test.
	Update callers.
	(keep_debug_symbols_and_test_copy): Delete unused vars.
2015-10-15 23:38:29 +10:30
Nick Clifton
886a250647 New ARC implementation.
bfd	* archures.c: Remove support for older ARC. Added support for new
	ARC cpus (ARC600, ARC601, ARC700, ARCV2).
	* bfd-in2.h: Likewise.
	* config.bfd: Likewise.
	* cpu-arc.c: Likewise.
	* elf32-arc.c: Totally changed file with a refactored
	inplementation of the ARC port.
	* libbfd.h: Added ARC specific relocation types.
	* reloc.c: Likewise.

gas     * config/tc-arc.c: Revamped file for ARC support.
        * config/tc-arc.h: Likewise.
        * doc/as.texinfo: Add new ARC options.
        * doc/c-arc.texi: Likewise.

ld	* configure.tgt: Added target arc-*-elf* and arc*-*-linux-uclibc*.
	* emulparams/arcebelf_prof.sh: New file
	* emulparams/arcebelf.sh: Likewise.
	* emulparams/arceblinux_prof.sh: Likewise.
	* emulparams/arceblinux.sh: Likewise.
	* emulparams/arcelf_prof.sh: Likewise.
	* emulparams/arcelf.sh: Likewise.
	* emulparams/arclinux_prof.sh: Likewise.
	* emulparams/arclinux.sh: Likewise.
	* emulparams/arcv2elfx.sh: Likewise.
	* emulparams/arcv2elf.sh: Likewise.
	* emultempl/arclinux.em: Likewise.
	* scripttempl/arclinux.sc: Likewise.
	* scripttempl/elfarc.sc: Likewise.
	* scripttempl/elfarcv2.sc: Likewise
	* Makefile.am: Add new ARC emulations.
	* Makefile.in: Regenerate.
	* NEWS: Mention the new feature.

opcodes * arc-dis.c: Revamped file for ARC support
	* arc-dis.h: Likewise.
	* arc-ext.c: Likewise.
	* arc-ext.h: Likewise.
	* arc-opc.c: Likewise.
	* arc-fxi.h: New file.
	* arc-regs.h: Likewise.
	* arc-tbl.h: Likewise.

binutils * readelf.c (get_machine_name): Remove A5 reference. Add ARCompact
	and ARCv2.
	(get_machine_flags): Handle EM_ARCV2 and EM_ARCOMPACT.
	(guess_is_rela): Likewise.
	(dump_relocations): Likewise.
	(is_32bit_abs_reloc): Likewise.
	(is_16bit_abs_reloc): Likewise.
	(is_none_reloc): Likewise.
	* NEWS: Mention the new feature.

include	* dis-asm.h (arc_get_disassembler): Correct declaration.
	* arc-reloc.def: Macro file with definition of all relocation
	types.
	* arc.h: Changed macros for the newly supported ARC cpus.  Altered
	enum defining the supported relocations.
	* common.h: Changed EM_ARC_A5 definition to EM_ARC_COMPACT. Added
	macro for EM_ARC_COMPACT2.
        * arc-func.h: New file.
        * arc.h: Likewise.
2015-10-07 14:20:19 +01:00
H.J. Lu
4ee959fb24 Handle symbolic link when copying source file
* lib/utils-lib.exp (run_dump_test): Handle symbolic link when
	copying source file.
2015-09-30 10:50:36 -07:00
H.J. Lu
cbd44e247e Don't use the output section size to copy input section
We can't use the output section size to copy input section since
--interleave will shrink the output section.  Instead, we change
bfd_convert_section_contents to return the updated input section
size.  When we do that, we don't need to adjust the output section
size to skip gap fills.

bfd/

	PR binutils/19020
	* bfd.c (bfd_convert_section_contents): Add ptr_size parameter.
	* bfd-in2.h: Regenerated.

binutils/

	PR binutils/19020
	* objcopy.c (copy_object): Don't adjust the output section size
	when copying from input sections.
	(copy_section): Use input section size for the copy.  Get the
	updated section size from bfd_convert_section_contents.

binutils/testsuite/

	PR binutils/19020
	* binutils-all/objcopy.exp: Run pr19020a and pr19020b.
	* lib/utils-lib.exp (run_dump_test): Support binary input.
	* binutils-all/pr19020.in: New file.
	* binutils-all/pr19020a.d: Likewise.
	* binutils-all/pr19020b.d: Likewise.
2015-09-29 13:31:57 -07:00
Alan Modra
c8373ebb4e Tweak binutils testsuite
Some targets provide aligned .bss sections, so explicitly align.
msp430 and rl78 emit "magic" symbols when assembling symbol.s, and
mips targets emit STT_OBJECT rather than STT_NOTYPE syms.

	* binutils-all/strip-12.s: Align .bss section.
	* binutils-all/strip-12.d: Adjust.
	* binutils-all/symbols-1.d: Allow extraneous symbols.
	* binutils-all/symbols-2.d: Likewise, and V for weakened syms.
	* binutils-all/symbols-3.d: Likewise.
	* binutils-all/symbols-4.d: Likewise.
2015-08-11 23:29:36 +09:30
Hans-Peter Nilsson
0a77d46120 binutils-all/strip-12.s: Use ".section .bss" instead of ".bss"
which isn't supported by all ELF targets.
2015-08-08 01:07:30 +02:00
H.J. Lu
d4ac1f878e Check sh_type/sh_flags/sh_addralign/sh_entsize when copying sh_link/sh_info
When copying the sh_link and sh_info fields in stripped section headers,
we also check if the sh_type, sh_flags, /sh_addralign and sh_entsize
fields of the output section match the output.  Since --only-keep-debug
turns all non-debug sections into SHT_NOBITS sections, the output
SHT_NOBITS type matches any input type.

bfd/

	PR binutils/18785
	* elf.c (_bfd_elf_copy_private_bfd_data): When copying the
	sh_link and sh_info fields in stripped section headers, we also
	check if the sh_type, sh_flags, /sh_addralign and sh_entsize
	fields of the output section match the output.  Since
	--only-keep-debug turns all non-debug sections into SHT_NOBITS
	sections, the output SHT_NOBITS type matches any input type.

binutils/testsuite/

	PR binutils/18785
	* binutils-all/objcopy.exp: Run strip-12.
	* binutils-all/strip-12.d: New file.
	* binutils-all/strip-12.s: Likewise.
2015-08-07 10:35:58 -07:00
Andrew Burgess
0b45135ec1 objcopy: Improve wildcard matching for symbols with '!' prefix.
When using options such as --localize-symbol, --globalize-symbol, etc,
along with the --wildcard option, prefixing a symbol name with '!'
should provide non-matching behaviour, as example the following example
is given in the manual:

    --wildcard --weaken-symbol !foo --weaken-symbol fo*

which should weaken all symbols matching the pattern 'fo*', but not the
symbol 'foo'.

However, this currently does not work, the current logic will waken all
symbols matching the pattern 'fo*' AND all symbols that are not 'foo'.
The symbol 'foo' is covered by the first condition, and so is weakened,
while, other symbols, for example 'bar' will match the second condition,
and so be weakened.

This patch adjusts the logic so that a pattern prefixed with '!'
specifically DOES NOT apply the relevant change to any matching symbols,
instead of applying the change to all non-matching symbols.  So this:

    --weaken-symbol !foo

will ensure that the symbol 'foo' is not weakened, but says nothing
about symbols that are not 'foo'.  As a result, a pattern prefixed with
'!' now only makes sense when used alongside a more wide ranging
wildcard pattern.

This change should make the wildcard matching feature more useful, with
no overall loss of functionality.  The example given in the manual,
weaken all symbols matching 'fo*' except 'foo' can now be achieved, but
so too can more complex examples, such as weaken all symbols matching
'fo*' except 'foo', 'foa', and 'fob', like this:

    --wildcard --weaken-symbol !foo \
               --weaken-symbol !foa \
               --weaken-symbol !fob \
               --weaken-symbol fo*

Under the previous scheme, something as symbols as, weaken all symbols
except 'foo' could have been achieved with this:

    --weaken-symbol !foo

however, this will no longer work.  To achieve the same result under the
new scheme this is now required:

    --weaken-symbol !foo --weaken-symbol *

binutils/ChangeLog:

	* objcopy.c (is_specified_symbol_predicate): Don't stop at first
	match.  Non-match rules set found to FALSE.

binutils/testsuite/ChangeLog:

	* binutils-all/objcopy.exp: Run new symbol tests.
	(objcopy_test_symbol_manipulation): New function.
	* binutils-all/symbols-1.d: New file.
	* binutils-all/symbols-2.d: New file.
	* binutils-all/symbols-3.d: New file.
	* binutils-all/symbols-4.d: New file.
	* binutils-all/symbols.s: New file.
2015-08-07 11:41:40 +02:00
Nick Clifton
63b9bbb7d7 Change the behaviour of the --only-keep-debug option to objcopy and strip so that the sh_link and sh_info fields in stripped section headers are preserved.
bfd	* elf.c (_bfd_elf_copy_private_bfd_data): Copy the sh_link and
	sh_info fields of sections whose type has been changed to
	SHT_NOBITS.

bin	* doc/binutils.texi: Document that the --only-keep-debug option
	to strip and objcopy preserves the section headers of stripped
	sections.

tests	* binutils-all/objcopy.exp (keep_debug_symbols_and_check_links):
	New proc.  Checks that debug-info-only binaries retain the
	sh_link field in stripped sections.
2015-08-05 16:16:39 +01:00
Nick Clifton
beab5d94ab Update description of proc run_dump_test
* lib/utils-lib.exp (run_dump_test): Document DUMPPROG, readelf
	and size parameters.  Alpha-sort switch tables.  Include
	addr2line, and size in list of possible auto-detected dump
	programs.
2015-08-04 08:19:12 +01:00
Nick Clifton
aff1a65ecb Fix the evaluation of RL78 complex relocs, by making immediate values be computed relative to a new absolute symbol.
gas	* config/tc-rl78.c (rl78_abs_sym): New local variable.
	(md_begin): Initialise the new symbol.
	(OPIMM): Define the value to be relative to the new symbol and not
	the absolute section symbol.

ld	* emulparams/elf32rl78.sh (OTHER_SECTIONS): Provide a value for
	the _-rl78_abs__ symbol.

tests	* gas/all/struct.d: Allow for extra symbols in the output.
	* gas/macros/test1.d: Likewise.
	* gas/elf/elf.exp: Add an rl78 machine.
	* gas/elf/sections2e-rl78: New file.

tests	* binutils-all/localize-hidden-1.d: Allow for extra symbols in the
	output.
        * binutils-all/strip-11.d: Skip for the RL78.
2015-07-24 16:44:27 +01:00
H.J. Lu
19a7fe52ae Make default compression gABI compliant
All programs in binutils+gdb git repo now support gABI compression
with the SHF_COMPRESSED bit.  This patch makes the zlib-gabi option
as compression default for gas, gold, ld and objcopy, instead of the
zlib-gnu option whose outputs are incompatible with gABI.

binutils/

	* objcopy.c (copy_file): Set BFD_COMPRESS_GABI if not
	zlib-gnu.
	* doc/binutils.texi: Change --compress-debug-sections and
	--compress-debug-sections=zlib to zlib-gabi.

binutils/testsuite/

	* binutils-all/compress.exp: Update.

gas/

	* as.c (parse_args): Make --compress-debug-sections and
	--compress-debug-sections=zlib the same as
	--compress-debug-sections=zlib-gabi.
	* doc/as.texinfo: Change --compress-debug-sections and
	--compress-debug-sections=zlib to zlib-gabi.

gold/

	* compressed_output.cc (Output_compressed_section::set_final_data_size):
	Make --compress-debug-sections=zlib the same as
	--compress-debug-sections=zlib-gabi.
	* testsuite/Makefile.am (flagstest_compress_debug_sections.check):
	Expect ".debug_.*" with the SHF_COMPRESSED bit, instead of
	".zdebug_".
	* testsuite/Makefile.in: Regenerated.

ld/

	* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Make
	--compress-debug-sections=zlib the same as
	--compress-debug-sections=zlib-gabi.
	* ld.texinfo: Change --compress-debug-sections=zlib to zlib-gabi.

ld/testsuite/

	* ld-elf/zlibbegin.rS: Updated to .debug_.* with the
	SHF_COMPRESSED bit.
	* ld-elf/zlibnormal.rS: Likewise.
2015-07-14 10:26:23 -07:00
H.J. Lu
889884731e Properly convert objects between different ELF classes
The output SHF_COMPRESSED section size is different from input if
ELF classes of input and output aren't the same.  We must adjust
the section sizes as well as the compression headers in
SHF_COMPRESSED sections when converting objects between different
ELF classes.

bfd/

	 PR binutils/18656
	 * bfd.c (bfd_convert_section_size): New function.
	 (bfd_convert_section_contents): Likewise.
	 * bfd-in2.h: Regenerated.

binutils/

2015-07-10  H.J. Lu  <hongjiu.lu@intel.com>

	 PR binutils/18656
	 * objcopy.c (setup_section): Call bfd_convert_section_size
	 to get the output section size.
	 (copy_section): Get the section size from the output section
	 and call bfd_get_full_section_contents to convert section
	 contents for output.

binutils/testsuite/

	 PR binutils/18656
	 * binutils-all/compress.exp (convert_test): New proc.
	 Run conversion tests between x86-64 and x32.
2015-07-10 14:27:39 -07:00
H.J. Lu
be0496857f Updated to accept .debug_* sections
* binutils-all/dw2-3.W: Updated to accept .debug_* sections.
2015-07-10 08:14:59 -07:00
Ed Maste
7e16ef3474 All FreeBSD targets are ELF except i?86-*-freebsd\[12\].*.
FreeBSD has used ELF for all targets for more than 15 years. Add
*-*-freebsd* except i?86-*-freebsd\[12\].* to is_elf_format. Update
is_aout_format to include a trailing dot, so that it does not match
freebsd-10.0 and later.
2015-05-26 22:52:39 +09:30
Nick Clifton
35d7c4317b Fix dw-2 test for 16-bit targets.
* binutils-all/dw2-3.S: Replace .int with .4byte.
2015-05-18 14:36:15 +01:00
Nick Clifton
0e602686df Add --decompress option to readelf to decompress sections before they are dumped.
bin	* readelf.c (options): Add "decompress".
	(usage): Mention -z/--decompress.
	(parse_args): Handle -z.
	(uncompress_section_contents): Move to earlier in the file.
	(dump_section_as_strings): If requested, decompress the section
	before dumping.
	(dump_section_as_bytes): Likewise.
	* doc/binutils.texi: Document the new option.

tests	* binutils-all/z.s: New test.  Checks the --decompress option to
	readelf.
	* binutils-all/readelf.exp: Run the test.
	* binutils-all/readelf.z: Expected output from readelf.
2015-05-15 17:16:31 +01:00
Nick Clifton
d1c4b12b9d Fix PR18374 by making readelf and objdump ignore end-of-list markers in the .debug_loc section if there are relocations against them.
PR binutils/18374
bin	* dwarf.h (struct dwarf_section): Add reloc_info and num_relocs
	fields.
	(struct dwarf_section_display): Change bitfield to boolean.
	(reloc_at): Add prototype.
	* dwarf.c (display_loc_list): Ignore list terminators if there are
	relocs against them.
	(display_debug_loc): Issue a warning if there are relocs against
	the .debug_loc section.
	(display_displays): Initialise reloc_info and num_relocs fields.
	* objdump.c (load_specific_debug_section): Initialise reloc_info
	and num_relocs fields.
	(reloc_at): New function.
	* readelf.c (is_32bit_abs_reloc): Add IA64's R_IA64_DIS32LSB
	reloc.
	(reloc_at): New function.
	(apply_relocations): Add relocs_return and num_relocs_return
	parameters.  Fill them in with the loaded relocs if non-NULL.
	(dump_section_as_bytes): Update call to apply_relocations.
	(load_specific_debug_section): Initialise reloc_info and
	num_relocs fields.

tests	* binutils-all/pr18374.s: New test file.
	* binutils-all/readelf.exp: Assemble and run the new test.
	* binutils-all/readelf.pr18374: Expected output from readelf.
2015-05-15 11:24:33 +01:00