Also check for gregset_t and fpregset_t types.
* configure: Regenerate.
* core-regset.c (sys/procfs.h): Only include if HAVE_SYS_PROCFS_H
is defined.
(fetch_core_registers): Turn into stub unless both HAVE_GREGSET_T
and HAVE_FPREGSET_T are defined. These changes allow systems
like linux that are migrating to /proc support to use a single
configuration for both new and old versions.
* config/i386/linux.mt: Note that this is now for both a.out and
ELF systems.
* config/i386/linux.mh (NATDEPFILES): Add solib.o, core-regset.o,
i386v4-nat.o
* config/i386/tm-linux.h (tm-sysv4.h): Include.
* config/i386/xm-linux.h (solib.h): Include
(SVR4_SHARED_LIBS): Define.
* i386v4-nat.c: Only compile if HAVE_SYS_PROCFS_H is defined.
(supply_gregset, fill_gregset): Compile if HAVE_GREGSET_T defined.
(supply_fpregset, fill_fpregset): Compile if HAVE_FPREGSET_T defined.
* configure.in, configure: Recognize rs6000-*-aix4*.
* config/powerpc/xm-aix.h: Reduce to include "xm-aix4.h".
* config/rs6000/aix4.mh (XM_FILE): Point to xm-aix4.h.
* config/rs6000/xm-aix4.h: New file.
* config/xm-aix4.h: New file.
From the Mentor work...enable configure & build on rs6000-ibm-aix4.1.*.
Note this is an unbelievably buggy debugger on this host.
* gdbserver/low-linux.c: New file.
* remote.c (remote_read_bytes): Fix aborts on larger packets.
* config/i386/linux.mh (GDBSERVER_DEPFILES, GDBSERVER_LIBS):
Define.
* stabsread.c (define_symbol): If register value is too large,
tell what it is and what max is.
that use ptrace(). This is not as useful as doing a full dump in a
human readable format, but is better than nothing when you are trying
to verify what is actually in the user struct.
* infptrace.c (udot_info): New function.
(PT_*): Define each individually if that one is not defined.
Update copyright to 1996.
* rs6000-nat.c (kernel_u_size): New function
Include <sys/user.h> for "struct user"
Update copyright to 1996.
* alpha-nat.c (kernel_u_size): New function.
Include <sys/user.h> for "struct user"
Update copyright to 1996.
* sparc-nat.c (kernel_u_size): New function.
Include <sys/user.h> for "struct user"
Update copyright to 1996.
* i386b-nat.c (kernel_u_size): New function.
Update copyright to 1996.
* i386v-nat.c (kernel_u_size): New function.
Update copyright to 1996.
* config/i386/nm-fbsd.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
* config/i386/nm-linux.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
* config/sparc/nm-sun4os4.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
* config/alpha/nm-osf2.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
* config/rs6000/nm-rs6000.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
from NUM_REGS to get number of general registers that we care about.
Update copyright to 1996.
* config/i386/tm-i386.h (REGISTER_BYTES): Define in terms
of number of general regs and number of floating point regs.
Update copyright to 1996.
(TARGET_HAS_HARDWARE_WATCHPOINTS, etc): Define as for Irix 4;
from Lee Iverson <leei@ai.sri.com>.
* config/mips/irix5.mh (NAT_FILE): Use nm-irix5.h.
* config/mips/irix[345].mh (MUNCH_DEFINE): Remove.
* configure: Update.
* config/powerpc/macos.mh, config/powerpc/macos.mt,
config/powerpc/nm-macos.h, config/powerpc/tm-macos.h, mac-nat.c:
New files, native PowerMac debugging support.
* Makefile.in (mac-nat.o): Add build rule.
* mpw-config.in (enable_cflags): Add support.
(m68k-apple-macos, powerpc-apple-macos): Fix natdepfiles to
list object file instead of source file.
* mpw-make.sed (@ENABLE_CFLAGS@): Don't edit out, replace with
value of variable.
(install, install-only): Edit MPW-specific installation into
place of Unix shell code.
* mac-gdb.r: Fix version resources to use symbolic version strings.
(cfrg): New resource, code fragment for PowerMac.
Also force HAVE_MMAP to be defined since autoconf is currently broken
for detecting a working mmap under hpux.
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS): Tweak MMAP_BASE_ADDRESS
to a better value suggested by Jeffrey A Law (law@cygnus.com).
trampolines. These are pieces of code between the caller and the
callee that figure out the address of the callee's code at run
time. Upon entry, we can't figure out the callee's address, so we
set a breakpoint within the trampoline where the address will be
known, and continue the target. Once we hit the breakpoint, we
break at the callee's address and proceed as usual.
start-sanitize-gm
* config/tm-magic.h: Define DYNAMIC_TRAMPOLINE_NEXTPC. Turn off
IN_SOLIB_CALL_TRAMPOLINE and IN_SOLIB_RETURN_TRAMPOLINE.
end-sanitize-gm
for all mips*-*-ecoff or elf configurations.
* configure: Regenerate using autoconf 2.4.
* config/mips/{idt*.mt,tm-idt*.h}: Rename to "idt" part of the
name to "embed". Build remote-array.o along with IDT protocols.
* remote-array.c: Nuke setting the serial port to 4800 baud.
S-record download code into srec.c.
* srec.c srec.h: New files. Contain S-record loading routines
formerly in monitor.c.
* serial.c serial.h: New routine just like fprintf, but uses
serial_t instead of FILE *.
* sh-tdep.c (frame_find_saved_regs init_extra_frame_info):
Don't add four to saved pc (makes things match manual). Also, fix
bug where we didn't get pc from stack frame correctly.
* config/sh/tm-sh.h (SAVED_PC_AFTER_CALL): Don't add four to
saved pc. Real hardware does this for you.
* sh3-rom.c (sh3_load): New routine. Sets up for download then
calls generic S-record loader.
* config/h8300/h8300.mt, config/h8500/h8500.mt,
config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt:
Add srec.o to TDEPFILES.
NOTE: Only the BigEndian build has the simulator included, because a
LittleEndian simulator is not constructed at the moment (it should
work, but has not been tested fully).
* fork-child.c (fork_inferior): Add call to
TARGET_CREATE_INFERIOR_HOOK to allow target specific code to get
control just before the new process executes it's first instruction.
* remote-mips.c (mips_initialize): Cleanup a bit. Don't try to
receive a packet at first. This speeds up initialization a lot.
Use TARGET_MONITOR_PROMPT instead of "<IDT>".
(common_breakpoint): Use rresponse instead of rerrflg to inspect
error code.
* symfile.c (syms_from_objfile reread_symbols): Call
TARGET_SYMFILE_POSTREAD to allow target specific code to get
control after reading new symbols.
* target.h: New macros TARGET_SYMFILE_POSTREAD, and
TARGET_CREATE_INFERIOR_HOOK. See above for descriptions.
* config/mips/{irix5.mh nm-irix5.h}: Delete nm-irix5.h. Make
NAT_FILE point directly at ../nm-sysv4.h.
* config/mips/{mipsm3.mh nm-m3.h}: Delete nm-m3.h. Make
NAT_FILE point directly at ../nm-m3.h.
* config/mips/{mipsv4.mh nm-sysv4.h}: Delete nm-sysv4.h. Make
NAT_FILE point directly at ../nm-sysv4.h.
* config/mips/nm-mips.h: Improve comment at top of file.
* config/mips/tm-mips.h (TARGET_MONITOR_PROMPT): Change
definition into a proper string.
start-sanitize-gm
* configure configure.in: Add support for --enable-gm.
(mips*-*-magic*): Change target from magic to idt.
* eval.c expprint.c expression.h parse.c remote-mips.c utils.c:
Change GENERAL_MAGIC_HACKS to GENERAL_MAGIC.
* magic.c magic.h: Update files from GM.
* config/mips/magic.mt: Delete. No longer necessary now that we
use --enable mechanism.
* config/mips/tm-idt.h: Add GM stuff needed for remote GM box.
* config/mips/tm-irix5.h: Add GM stuff needed for native Irix box.
* config/mips/tm-magic.h: Move up to config/tm-magic.h. Move all
platform specific stuff into tm-irix.h and tm-idt.h. Add defs for
TARGET_SYMFILE_POSTREAD and TARGET_CREATE_INFERIOR_HOOK.
end-sanitize-gm
definitions.
(TARGET_BYTE_ORDER): Moved here from tm-i386v.h.
(IEEE_FLOAT): Moved here from tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Define default as 2.
(FUNCTION_START_OFFSET): Moved here from tm-i386v.h.
(SKIP_PROLOGUE): Moved here from tm-i386v.h.
(SAVED_PC_AFTER_CALL): Moved here from tm-i386v.h.
(INNER_THAN): Moved here from tm-i386v.h.
(BREAKPOINT): Moved here from tm-i386v.h.
(DECR_PC_AFTER_BREAK): Moved here from tm-i386v.h.
(ABOUT_TO_RETURN): Moved here from tm-i386v.h.
(REGISTER_SIZE): Moved here from tm-i386v.h.
(NUM_REGS): Moved here from tm-i386v.h.
(REGISTER_NAMES): Moved here from tm-i386v.h.
(EXTRACT_STRUCT_VALUE_ADDRESS): Moved here from tm-i386v.h.
(FP_REGNUM): Moved here from tm-i386v.h.
(SP_REGNUM): Moved here from tm-i386v.h.
(PC_REGNUM): Moved here from tm-i386v.h.
(PS_REGNUM): Moved here from tm-i386v.h.
(FP0_REGNUM): Moved here from tm-i386aix.h.
(FPC_REGNUM): Moved here from tm-sun386.h.
(REGISTER_BYTES): Moved here from tm-i386aix.h.
(REGISTER_BYTE): Moved here from tm-i386aix.h.
(REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
(MAX_REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
(REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
(MAX_REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
(EXTRACT_RETURN_VALUE): Moved here from tm-i386aix.h.
(STORE_RETURN_VALUE): Moved here from tm-i386aix.h.
(REGISTER_VIRTUAL_TYPE): Moved here from tm-i386v.h.
(STORE_STRUCT_RETURN): Moved here from tm-i386v.h.
(FRAME_CHAIN): Moved here from tm-i386v4.h.
(FRAMELESS_FUNCTION_INVOCATION): Moved here from tm-i386v4.h.
(FRAME_SAVED_PC): Moved here from tm-i386os9k.h
(FRAME_ARGS_ADDRESS): Moved here from tm-i386v.h.
(FRAME_LOCALS_ADDRESS): Moved here from tm-i386v.h.
(FRAME_NUM_ARGS): Moved here from tm-i386sun.h.
(FRAME_ARGS_SKIP): Moved here from tm-i386v.h.
(FRAME_FIND_SAVED_REGS): Moved here from tm-i386v.h.
(PUSH_DUMMY_FRAME): Moved here from tm-i386v.h.
(POP_FRAME): Moved here from tm-i386v.h.
(CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET,
CALL_DUMMY_BREAKPOINT_OFFSET, FIX_CALL_DUMMY): Moved here from
tm-i386v.h
(print_387_control_word, print_387_status_word): Declare prototypes.
(struct frame_info, struct frame_saved_regs): Forward decls for
prototypes.
(SP_ARG0): Moved here from tm-i386v.h.
* config/i386/tm-i386v.h:
(i386/tm-i386.h): Include.
(TARGET_BYTE_ORDER): Remove.
(IEEE_FLOAT): Remove.
(START_INFERIOR_TRAPS_EXPECTED): Undef before redefine to 4.
(FUNCTION_START_OFFSET): Remove.
(SKIP_PROLOGUE): Remove.
(i386_skip_prologue): Remove prototype.
(SAVED_PC_AFTER_CALL): Remove.
(INNER_THAN): Remove.
(BREAKPOINT): Remove.
(DECR_PC_AFTER_BREAK): Remove.
(ABOUT_TO_RETURN): Remove.
(REGISTER_SIZE): Remove.
(NUM_REGS): Undef before redefine to 16 (no FP support).
(REGISTER_NAMES): Undef before redefine.
(FP_REGNUM, SP_REGNUM, PC_REGNUM, PS_REGNUM): Remove.
(REGISTER_BYTES): Undef before redefine.
(REGISTER_BYTE): Undef before redefine.
(REGISTER_RAW_SIZE): Undef before redefine.
(REGISTER_VIRTUAL_SIZE): Undef before redefine.
(MAX_REGISTER_RAW_SIZE): Undef before redefine.
(MAX_REGISTER_VIRTUAL_SIZE): Undef before redefine.
(REGISTER_VIRTUAL_TYPE): Undef before redefine.
(STORE_STRUCT_RETURN): Undef before redefine.
(EXTRACT_RETURN_VALUE): Undef before redefine.
(STORE_RETURN_VALUE): Undef before redefine.
(EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
(FRAME_CHAIN): Undef before redefine.
(FRAMELESS_FUNCTION_INVOCATION): Undef before redefine.
(FRAME_SAVED_PC): Undef before redefine.
(FRAME_ARGS_ADDRESS): Remove.
(FRAME_LOCALS_ADDRESS): Remove.
(FRAME_NUM_ARGS): Undef before redefine.
(FRAME_ARGS_SKIP): Remove.
(FRAME_FIND_SAVED_REGS): Remove.
(PUSH_DUMMY_FRAME): Remove.
(POP_FRAME): Remove.
(CALL_DUMMY): Remove.
(CALL_DUMMY_LENGTH): Remove.
(CALL_DUMMY_START_OFFSET): Remove.
(CALL_DUMMY_BREAKPOINT_OFFSET): Remove
(FIX_CALL_DUMMY): Remove.
(print_387_control_word): Remove.
(print_387_status_word): Remove.
(SP_ARG0): Remove.
* config/i386/tm-symmetry.h:
(TM_SYMMETRY_H): Enclose file in test for define & define if needed.
(START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
(DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
or tm-i386v.h, #undef, and #define to 0.
(MAX_REGISTER_RAW_SIZE): Remove.
(FRAME_CHAIN): Remove.
(FRAMELESS_FUNCTION_INVOCATION): Remove.
(FRAME_SAVED_PC): Remove.
(print_387_control_word, print_387_status_word): Remove prototypes.
* config/i386/tm-ptx.h:
(TM_PTX_H): Enclose file in test for define & define if needed.
(START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
(DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
or tm-i386v.h, #undef, and #define to 0.
(SDB_REG_TO_REGNUM): Remove obsolete commented out define.
(print_387_control_word, print_387_status_word): Remove prototypes.
* config/i386/tm-linux.h:
(TM_LINUX_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
* config/i386/tm-i386v4.h:
(TM_I386V4_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(FRAME_CHAIN): Moved to tm-i386.h.
(FRAMELESS_FUNCTION_INVOCATION): Moved to tm-i386.h.
(FRAME_SAVED_PC): Remove.
(sigtramp_saved_pc): Define as i386v4_sigtramp_saved_pc.
(FRAME_NUM_ARGS): Remove.
* config/i386/tm-i386os9k.h:
(TM_I386OS9K_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(NUM_REGS): Undefine before redefining.
(FRAME_CHAIN): Remove.
(FRAMELESS_FUNCTION_INVOCATION): Remove.
(FRAME_SAVED_PC): Move to tm-i386.h.
* config/i386/tm-i386nw.h:
(TM_I386NW_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
* config/i386/tm-i386bsd.h:
(TM_I386BSD_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(FRAMELESS_FUNCTION_INVOCATION): Remove.
(FRAME_SAVED_PC): Remove.
* config/i386/tm-i386aix.h:
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(FP_REGNUM): Remove.
(SP_REGNUM): Remove.
(PC_REGNUM): Remove.
(PS_REGNUM): Remove.
(FP0_REGNUM): Moved to tm-i386.h.
(NUM_REGS): Remove.
(REGISTER_NAMES): Remove.
(REGISTER_BYTES): Moved to tm-i386.h.
(REGISTER_BYTE): Moved to tm-i386.h.
(REGISTER_RAW_SIZE): Moved to tm-i386.h.
(MAX_REGISTER_RAW_SIZE): Moved to tm-i386.h.
(REGISTER_VIRTUAL_SIZE): Moved to tm-i386.h.
(REGISTER_VIRTUAL_TYPE): Removed.
(EXTRACT_RETURN_VALUE): Moved to tm-i386.h.
(STORE_RETURN_VALUE): Moved to tm-i386.h.
* config/i386/tm-sun386.h:
(TM_SUN386_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include.
(TARGET_BYTE_ORDER): Remove.
(FUNCTION_START_OFFSET): Remove.
(SKIP_PROLOGUE): Remove.
(SAVED_PC_AFTER_CALL): Remove.
(INNER_THAN): Remove.
(BREAKPOINT): Remove.
(DECR_PC_AFTER_BREAK): Remove.
(ABOUT_TO_RETURN): Remove.
(REGISTER_SIZE): Remove.
(NUM_REGS): Undefine before defining.
(REGISTER_NAMES): Undefine before redefining.
(REGISTER_BYTES): Undefine before redefining.
(REGISTER_BYTE): Undefine before defining.
(FP_REGNUM): Undefine before defining.
(PC_REGNUM): Undefine before defining.
(FPC_REGNUM): Undefine before defining.
(REGISTER_RAW_SIZE): Undefine before defining.
(FRAME_CHAIN): Undefine before defining.
(FRAMELESS_FUNCTION_INVOCATION): Undefine before defining.
(FRAME_SAVED_PC): Undefine before defining.
(FRAME_NUM_ARGS): Moved to tm-i386.h.
(MAX_REGISTER_RAW_SIZE): Remove.
(MAX_REGISTER_VIRTUAL_SIZE): Remove.
(STORE_STRUCT_RETURN): Remove.
(EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
(FRAME_ARGS_ADDRESS): Remove.
(FRAME_LOCALS_ADDRESS): Remove.
(FRAME_NUM_ARGS): Undefine before defining.
(FRAME_ARGS_SKIP): Remove.
(FRAME_FIND_SAVED_REGS): Remove.
(PUSH_DUMMY_FRAME): Remove.
(POP_FRAME): Remove.
(CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET): Remove.
(struct frame_info, struct frame_saved_regs): Remove forward decls
for prototypes.
* config/i386/tm-i386lynx.h (i386/tm-i386.h): Include instead of
tm-i386v.h.
* config/i386/tm-i386m3.h (i386/tm-i386.h): Include instead of
tm-i386v.h.
* defs.h: Test on name __WIN32__ rather than WIN32.
* inflow.c (new_tty): Likewise
* terminal.h: Likewise.
* utils.c (initialize_utils): Likewise.
* win32-nat.c (child_create_inferiror): Print error code when failing.
* config/i386/win32.mh (XM_CLIBS): Need -lkernel32.
* config/pa/hppahpux.mh: Remove hardcoding of X locations.
* Makefile.in: Use X11_CFLAGS, X11_LDFLAGS and X11_LIBS.
* configure.in: Link X statically on Solaris, SunOS and HPUX.
build config.h, add empty definitions to mk.tmp.
(powerpc-apple-macos): Make it work.
* mpw-make.sed: New file, sed commands to translate Unix makefile
into MPW syntax.
* mpw-make.in: Remove.
* mac-gdb.r: New file, was macgdb.r, renamed for consistency
with other tools, now includes cfrg resource.
* macgdb.r: Remove.
* config/m68k/xm-mpw.h: Remove most of contents, replace with
include of include/mpw/mpw.h.
_initialize_array to array_open. It was forcing the baud rate of
all targets to be 4800 baud! Seems like I've fixed this before...
* config/mips/idt.mt (TDEPFILES): Remove remote-array.o. This
has *nothing* to do with IDT!!!
sh3 monitor support.
* monitor.c: Cleanup regexp compilation stuff to make it easier
to use several regexps.
* monitor.h: Get rid of struct rom_cmd_data. It's no longer used.
* config/m68k/tm-monitor.h: Don't redefine NUM_REGS here. It just
causes GDB to crash.
* callback.[ch]: New files.
* remote-rdp.c: Support for the ARM RDP monitor.
* Makefile: Update.
* arm-tdep.c (arm_othernames): New.
(_initialize_arm_tdep): install 'othernames' command.
(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
* configure.in: Check for termios.h, termio.h and sgtty.h.
(i[345]86-*-win32*): New host.
* configure: Regenerated.
* inflow.c: Clean up inclusions.
* main.c (main): Check for WINGDB, not WIN32.
* printcmd.c (do_examine): Put QUIT test in loop.
* remote-hms.c (e7000_load): Delete.
(hms_ops): Point to generic_load instead.
* remote-hms.c (hms_ops): Point to generic_load.
* remote-sim.c (sim_callback_write_stdout): Becomes
gdbsim_write_stdout.
(gdbsim_load): Call generic_load.
* remote-utils.c (gr_load_image): Delete.
* ser-unix.c (terminal.h): Include instead of havig
own #if tree.
(hardwire_flush_input): Reset input buffer too.
* source.c (openp): If WIN32 then open file in binary mode.
* terminal.h: Configure IO mechanism using autoconf defines if available and
not overriden.
* utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check.
* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o
* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE.
(ADDR_BITS_REMOVE): New.
(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
(INST_xx): New
(FRAME_FIND_SAVED_REGS): Pass the right argument.
(arm_get_next_pc): Declare.
* mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
