Making all-stop run on top of non-stop caused a small regression
in behavior. This was observed on x86_64-linux. The attached testcase
is in C whereas the investigation was done with an Ada program,
but it's the same scenario, and using a C testcase allows wider testing.
Basically: I am debugging a single-threaded program, and currently
stopped inside a function provided by a shared-library, at a line
calling a subprogram provided by a second shared library, and trying
to "next" over that function call.
Before we changed the default all-stop behavior, we had:
7 Impl_Initialize; -- Stop here and try "next" over this line
(gdb) n
8 return 5; <<-- OK
But now, "next" just stops much earlier:
(gdb) n
0x00007ffff7bd8560 in impl.initialize@plt () from /[...]/lib/libpck.so
What happens is that next stops at a call instruction, which calls
the function's PLT, and GDB fails to notice that the inferior stepped
into a subroutine, and so decides that we're done. We can see another
symptom of the same issue by looking at the backtrace at the point
GDB stopped:
(gdb) bt
#0 0x00007ffff7bd8560 in impl.initialize@plt ()
from /[...]/lib/libpck.so
#1 0x00000000f7bd86f9 in ?? ()
#2 0x00007fffffffdf50 in ?? ()
#3 0x0000000000401893 in a () at /[...]/a.adb:7
Backtrace stopped: frame did not save the PC
With a functioning GDB, the backtrace looks like the following instead:
#0 0x00007ffff7bd8560 in impl.initialize@plt ()
from /[...]/lib/libpck.so
#1 0x00007ffff7bd86f9 in sub () at /[...]/pck.adb:7
#2 0x0000000000401893 in a () at /[...]/a.adb:7
Note how, for frame #1, the address looks quite similar, except
for the high-order bits not being set:
#1 0x00007ffff7bd86f9 in sub () at /[...]/pck.adb:7 <<<-- OK
#1 0x00000000f7bd86f9 in ?? () <<<-- WRONG
^^^^
||||
Wrong
Investigating this further led me to displaced stepping.
As we are "next"-ing from a location where a breakpoint is inserted,
we need to step out of it, and since we're on non-stop mode, we need
to do it using displaced stepping. And looking at
amd64-tdep.c:amd64_displaced_step_fixup, I found the code that handles
the return address:
regcache_cooked_read_unsigned (regs, AMD64_RSP_REGNUM, &rsp);
retaddr = read_memory_unsigned_integer (rsp, retaddr_len, byte_order);
retaddr = (retaddr - insn_offset) & 0xffffffffUL;
The mask used to compute retaddr looks wrong to me, keeping only
4 bytes instead of 8, and explains why the high order bits of
the backtrace are unset. What happens is that, after the displaced
stepping has completed, GDB restores that return address at the location
where the program expects it. But because the top half bits of
the address have been masked out, the return address is now invalid.
The incorrect behavior of the "next" command and the backtrace at
that location are the first symptoms of that. Another symptom is
that this actually alters the behavior of the program, where a "cont"
from there soon leads to a SEGV when the inferior tries to jump back
to that incorrect return address:
(gdb) c
Continuing.
Program received signal SIGSEGV, Segmentation fault.
0x00000000f7bd86f9 in ?? ()
^^^^^^^^^^^^^^^^^^
This patch fixes the issue by using a mask that seems more appropriate
for this architecture.
gdb/ChangeLog:
* amd64-tdep.c (amd64_displaced_step_fixup): Fix the mask used to
compute RETADDR.
gdb/testsuite/ChangeLog:
* gdb.base/dso2dso-dso2.c, gdb.base/dso2dso-dso2.h,
gdb.base/dso2dso-dso1.c, gdb.base/dso2dso-dso1.h, gdb.base/dso2dso.c,
gdb.base/dso2dso.exp: New files.
Tested on x86_64-linux, no regression.
We concluded that gdbarch_in_function_epilogue_p is misnamed, since it
returns true if the given PC is one instruction after the one that
destroyed the stack (which isn't necessarily inside an epilogue),
therefore it should be renamed to stack_frame_destroyed_p.
I also took the liberty of renaming the arch-specific implementations to
*_stack_frame_destroyed_p as well for consistency.
gdb:
2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
* amd64-tdep.c: Replace in_function_epilogue_p with
stack_frame_destroyed_p throughout.
* arch-utils.c: Ditto.
* arch-utils.h: Ditto.
* arm-tdep.c: Ditto.
* breakpoint.c: Ditto.
* gdbarch.sh: Ditto.
* hppa-tdep.c: Ditto.
* i386-tdep.c: Ditto.
* mips-tdep.c: Ditto.
* nios2-tdep.c: Ditto.
* rs6000-tdep.c: Ditto.
* s390-linux-tdep.c: Ditto.
* score-tdep.c: Ditto.
* sh-tdep.c: Ditto.
* sparc-tdep.c: Ditto.
* sparc-tdep.h: Ditto.
* sparc64-tdep.c: Ditto.
* spu-tdep.c: Ditto.
* tic6x-tdep.c: Ditto.
* tilegx-tdep.c: Ditto.
* xstormy16-tdep.c: Ditto.
* gdbarch.c, gdbarch.h: Re-generated.
Recognize NT_X86_XSTATE notes in FreeBSD process cores. Recent
FreeBSD versions include a note containing the XSAVE state for each
thread in the process when XSAVE is in use. The note stores a copy of
the current XSAVE mask in a reserved section of the machine-defined
XSAVE state at the same offset as Linux's NT_X86_XSTATE note.
For native processes, use the PT_GETXSTATE_INFO ptrace request to
determine if XSAVE is enabled, and if so the active XSAVE state mask
(that is, the value of %xcr0 for the target process) as well as the
size of XSAVE state area. Use the PT_GETXSTATE and PT_SETXSTATE requests
to fetch and store the XSAVE state, respectively, in the BSD x86
native targets.
In addition, the FreeBSD amd64 and i386 native targets now include
"read_description" target methods to determine the correct x86 target
description for the current XSAVE mask. On FreeBSD amd64 this also
properly returns an i386 target description for 32-bit binaries which
allows the 64-bit GDB to run 32-bit binaries.
Note that the ptrace changes are in the BSD native targets, not the
FreeBSD-specific native targets since that is where the other ptrace
register accesses occur. Of the other BSDs, NetBSD and DragonFly use
XSAVE in the kernel but do not currently export the extended state via
ptrace(2). OpenBSD does not currently support XSAVE.
bfd/ChangeLog:
* elf.c (elfcore_grok_note): Recognize NT_X86_XSTATE on
FreeBSD.
(elfcore_write_xstatereg): Use correct note name on FreeBSD.
gdb/ChangeLog:
* amd64-tdep.c (amd64_target_description): New function.
* amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
* amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
(amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
x86 extended save area.
(amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
* amd64bsd-nat.h: Export amd64bsd_xsave_len.
* amd64fbsd-nat.c (amd64fbsd_read_description): New function.
(_initialize_amd64fbsd_nat): Set "to_read_description" to
"amd64fbsd_read_description".
* amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
(amd64fbsd_supply_xstateregset): New function.
(amd64fbsd_collect_xstateregset): New function.
Add "amd64fbsd_xstateregset".
(amd64fbsd_iterate_over_regset_sections): New function.
(amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
"I386_FBSD_XSAVE_XCR0_OFFSET".
Add "iterate_over_regset_sections" gdbarch method.
Add "core_read_description" gdbarch method.
* i386-tdep.c (i386_target_description): New function.
* i386-tdep.h: Export i386_target_description and tdesc_i386.
* i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
(i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
x86 extended save area.
(i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
* i386bsd-nat.h: Export i386bsd_xsave_len.
* i386fbsd-nat.c (i386fbsd_read_description): New function.
(_initialize_i386fbsd_nat): Set "to_read_description" to
"i386fbsd_read_description".
* i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
(i386fbsd_core_read_description): New function.
(i386fbsd_supply_xstateregset): New function.
(i386fbsd_collect_xstateregset): New function.
Add "i386fbsd_xstateregset".
(i386fbsd_iterate_over_regset_sections): New function.
(i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
"I386_FBSD_XSAVE_XCR0_OFFSET".
Add "iterate_over_regset_sections" gdbarch method.
Add "core_read_description" gdbarch method.
* i386fbsd-tdep.h: New file.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
This normalizes some exception catch blocks that check for ex.reason
to look like this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ALL)
{
...
}
if (ex.reason < 0)
{
...
}
~~~
This is a preparation step for running a script that converts all
TRY_CATCH uses to look like this instead:
~~~
TRY
{
...
}
CATCH (ex, RETURN_MASK_ALL)
{
...
}
END_CATCH
~~~
The motivation for that change is being able to reimplent TRY/CATCH in
terms of C++ try/catch.
This commit makes it so that:
- no condition other than ex.reason < 0 is checked in the if
predicate
- there's no "else" block to check whether no exception was caught
- there's no code between the TRY_CATCH (TRY) block and the
'if (ex.reason < 0)' block (CATCH).
- the exception object is no longer referred to outside the if/catch
block. Note the local volatile exception objects that are
currently defined inside functions that use TRY_CATCH will
disappear. In cases it's more convenient to still refer to the
exception outside the catch block, a new non-volatile local is
added and copy to that object is made within the catch block.
The following patches should make this all clearer.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
(amd64_epilogue_frame_cache): Normal exception handling code.
* break-catch-throw.c (check_status_exception_catchpoint)
(re_set_exception_catchpoint): Ditto.
* cli/cli-interp.c (safe_execute_command):
* cli/cli-script.c (script_from_file): Ditto.
* compile/compile-c-symbols.c (generate_c_for_for_one_variable):
Ditto.
* compile/compile-object-run.c (compile_object_run): Ditto.
* cp-abi.c (baseclass_offset): Ditto.
* cp-valprint.c (cp_print_value): Ditto.
* exceptions.c (catch_exceptions_with_msg):
* frame-unwind.c (frame_unwind_try_unwinder): Ditto.
* frame.c (get_frame_address_in_block_if_available): Ditto.
* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
(i386_sigtramp_frame_cache): Ditto.
* infcmd.c (post_create_inferior): Ditto.
* linespec.c (parse_linespec, find_linespec_symbols):
* p-valprint.c (pascal_object_print_value): Ditto.
* parse.c (parse_expression_for_completion): Ditto.
* python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
* remote.c (remote_get_noisy_reply): Ditto.
* s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
* solib-svr4.c (solib_svr4_r_map): Ditto.
This commit introduces a new inline common function "startswith"
which takes two string arguments and returns nonzero if the first
string starts with the second. It also updates the 295 places
where this logic was written out longhand to use the new function.
gdb/ChangeLog:
* common/common-utils.h (startswith): New inline function.
All places where this logic was used updated to use the above.
This patch renames symbols that happen to have names which are
reserved keywords in C++.
Most of this was generated with Tromey's cxx-conversion.el script.
Some places where later hand massaged a bit, to fix formatting, etc.
And this was rebased several times meanwhile, along with re-running
the script, so re-running the script from scratch probably does not
result in the exact same output. I don't think that matters anyway.
gdb/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
gdb/gdbserver/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
As reported in PR 17808, a test case with a forged (invalid) core file
can crash GDB with an assertion failure. In that particular case the
prstatus of an i386 core file looks like that from an AMD64 core file.
Consequently the respective regset supply function i386_supply_gregset
is invoked with a larger buffer than usual. But i386_supply_gregset
asserts a specific buffer size, and this assertion fails.
The patch relaxes all buffer size assertions in regset supply
functions such that they merely check for a sufficiently large buffer.
For consistency the regset collect functions are adjusted as well.
gdb/ChangeLog:
PR corefiles/17808:
* gdbarch.sh (iterate_over_regset_sections_cb): Document this
function type, particularly its SIZE parameter.
* gdbarch.h: Regenerate.
* amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
actual against required size using ">=" instead of "==".
(amd64_collect_fpregset): Likewise.
* i386-tdep.c (i386_supply_gregset): Likewise.
(i386_collect_gregset): Likewise.
(i386_supply_fpregset): Likewise.
(i386_collect_fpregset): Likewise.
* mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
(mips_fill_gregset_wrapper): Likewise.
(mips_supply_fpregset_wrapper): Likewise.
(mips_fill_fpregset_wrapper): Likewise.
(mips64_supply_gregset_wrapper): Likewise.
(mips64_fill_gregset_wrapper): Likewise.
(mips64_supply_fpregset_wrapper): Likewise.
(mips64_fill_fpregset_wrapper): Likewise.
* mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
(am33_supply_fpregset_method): Likewise.
(am33_collect_gregset_method): Likewise.
(am33_collect_fpregset_method): Likewise.
Dwarf register numbers are defined in "System V Application Binary
Interface AMD64 Architecture Processor Supplement Draft Version 0.99.6"
The amd64_dwarf_regmap array is missing the 8 MMX registers in Figure
3.36: DWARF Register Number Mapping page 57. This leads to a wrong
value for the registers past this point.
gdb/ChangeLog:
Pushed by Joel Brobecker <brobecker@adacore.com>.
* amd64-tdep.c (amd64_dwarf_regmap array): Add missing MMX
registers.
Tested on x86_64-linux.
Currently "symtabs" in gdb are stored as a single linked list of
struct symtab that contains both symbol symtabs (the blockvectors)
and file symtabs (the linetables).
This has led to confusion, bugs, and performance issues.
This patch is conceptually very simple: split struct symtab into
two pieces: one part containing things common across the entire
compilation unit, and one part containing things specific to each
source file.
Example.
For the case of a program built out of these files:
foo.c
foo1.h
foo2.h
bar.c
foo1.h
bar.h
Today we have a single list of struct symtabs:
objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL
where "->" means the "next" pointer in struct symtab.
With this patch, that turns into:
objfile -> foo.c(cu) -> bar.c(cu) -> NULL
| |
v v
foo.c bar.c
| |
v v
foo1.h foo1.h
| |
v v
foo2.h bar.h
| |
v v
NULL NULL
where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects,
and the files foo.c, etc. are struct symtab objects.
So now, for example, when we want to iterate over all blockvectors
we can now just iterate over the compunit_symtab list.
Plus a lot of the data that was either unused or replicated for each
symtab in a compilation unit now lives in struct compunit_symtab.
E.g., the objfile pointer, the producer string, etc.
I thought of moving "language" out of struct symtab but there is
logic to try to compute the language based on previously seen files,
and I think that's best left as is for now.
With my standard monster benchmark with -readnow (which I can't actually
do, but based on my calculations), whereas today the list requires
77MB to store all the struct symtabs, it now only requires 37MB.
A modest space savings given the gigabytes needed for all the debug info,
etc. Still, it's nice. Plus, whereas today we create a copy of dirname
for each source file symtab in a compilation unit, we now only create one
for the compunit.
So this patch is basically just a data structure reorg,
I don't expect significant performance improvements from it.
Notes:
1) A followup patch can do a similar split for struct partial_symtab.
I have left that until after I get the changes I want in to
better utilize .gdb_index (it may affect how we do partial syms).
2) Another followup patch *could* rename struct symtab.
The term "symtab" is ambiguous and has been a source of confusion.
In this patch I'm leaving it alone, calling it the "historical" name
of "filetabs", which is what they are now: just the file-name + line-table.
gdb/ChangeLog:
Split struct symtab into two: struct symtab and compunit_symtab.
* amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit.
* block.c (blockvector_for_pc_sect): Change "struct symtab *" argument
to "struct compunit_symtab *". All callers updated.
(set_block_compunit_symtab): Renamed from set_block_symtab. Change
"struct symtab *" argument to "struct compunit_symtab *".
All callers updated.
(get_block_compunit_symtab): Renamed from get_block_symtab. Change
result to "struct compunit_symtab *". All callers updated.
(find_iterator_compunit_symtab): Renamed from find_iterator_symtab.
Change result to "struct compunit_symtab *". All callers updated.
* block.h (struct global_block) <compunit_symtab>: Renamed from symtab.
hange type to "struct compunit_symtab *". All uses updated.
(struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab".
Change type to "struct compunit_symtab *". All uses updated.
* buildsym.c (struct buildsym_compunit): New struct.
(subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete.
(buildsym_compunit): New static global.
(finish_block_internal): Update to fetch objfile from
buildsym_compunit.
(make_blockvector): Delete objfile argument.
(start_subfile): Rewrite to use buildsym_compunit. Don't initialize
debugformat, producer.
(start_buildsym_compunit): New function.
(free_buildsym_compunit): Renamed from free_subfiles_list.
All callers updated.
(patch_subfile_names): Rewrite to use buildsym_compunit.
(get_compunit_symtab): New function.
(get_macro_table): Delete argument comp_dir. All callers updated.
(start_symtab): Change result to "struct compunit_symtab *".
All callers updated. Create the subfile of the main source file.
(watch_main_source_file_lossage): Rewrite to use buildsym_compunit.
(reset_symtab_globals): Update.
(end_symtab_get_static_block): Update to use buildsym_compunit.
(end_symtab_without_blockvector): Rewrite.
(end_symtab_with_blockvector): Change result to
"struct compunit_symtab *". All callers updated.
Update to use buildsym_compunit. Don't set symtab->dirname,
instead set it in the compunit.
Explicitly make sure main symtab is first in its list.
Set debugformat, producer, blockvector, block_line_section, and
macrotable in the compunit.
(end_symtab_from_static_block): Change result to
"struct compunit_symtab *". All callers updated.
(end_symtab, end_expandable_symtab): Ditto.
(set_missing_symtab): Change symtab argument to
"struct compunit_symtab *". All callers updated.
(augment_type_symtab): Ditto.
(record_debugformat): Update to use buildsym_compunit.
(record_producer): Update to use buildsym_compunit.
* buildsym.h (struct subfile) <dirname>: Delete.
<producer, debugformat>: Delete.
<buildsym_compunit>: New member.
(get_compunit_symtab): Declare.
* dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed
from primary_symtab. Change type to "struct compunit_symtab *".
All uses updated.
(dwarf2_start_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dwarf_decode_macros): Delete comp_dir argument. All callers updated.
(struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
(dw2_instantiate_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dw2_find_last_source_symtab): Ditto.
(dw2_lookup_symbol): Ditto.
(recursively_find_pc_sect_compunit_symtab): Renamed from
recursively_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(dw2_find_pc_sect_compunit_symtab): Renamed from
dw2_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(get_compunit_symtab): Renamed from get_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(recursively_compute_inclusions): Change type of immediate_parent
argument to "struct compunit_symtab *". All callers updated.
(compute_compunit_symtab_includes): Renamed from
compute_symtab_includes. All callers updated. Rewrite to compute
includes of compunit_symtabs and not symtabs.
(process_full_comp_unit): Update to work with struct compunit_symtab.
(process_full_type_unit): Ditto.
(dwarf_decode_lines_1): Delete argument comp_dir. All callers updated.
(dwarf_decode_lines): Remove special case handling of main subfile.
(macro_start_file): Delete argument comp_dir. All callers updated.
(dwarf_decode_macro_bytes): Ditto.
* guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to
use struct compunit_symtab.
* i386-tdep.c (i386_skip_prologue): Fetch producer from compunit.
* jit.c (finalize_symtab): Build compunit_symtab.
* jv-lang.c (get_java_class_symtab): Change result to
"struct compunit_symtab *". All callers updated.
* macroscope.c (sal_macro_scope): Fetch macro table from compunit.
* macrotab.c (struct macro_table) <compunit_symtab>: Renamed from
comp_dir. Change type to "struct compunit_symtab *".
All uses updated.
(new_macro_table): Change comp_dir argument to cust,
"struct compunit_symtab *". All callers updated.
* maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from
nr_primary_symtabs. All uses updated.
(count_symtabs_and_blocks): Update to handle compunits.
(report_command_stats): Update output, "primary symtabs" renamed to
"compunits".
* mdebugread.c (new_symtab): Change result to
"struct compunit_symtab *". All callers updated.
(parse_procedure): Change type of search_symtab argument to
"struct compunit_symtab *". All callers updated.
* objfiles.c (objfile_relocate1): Loop over blockvectors in a
separate loop.
* objfiles.h (struct objfile) <compunit_symtabs>: Renamed from
symtabs. Change type to "struct compunit_symtab *". All uses updated.
(ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS.
All uses updated.
(ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS.
All uses updated.
(ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated.
(ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated.
* psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
* psymtab.c (psymtab_to_symtab): Change result type to
"struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab_from_partial): Renamed from
find_pc_sect_symtab_from_partial. Change result type to
"struct compunit_symtab *". All callers updated.
(lookup_symbol_aux_psymtabs): Change result type to
"struct compunit_symtab *". All callers updated.
(find_last_source_symtab_from_partial): Ditto.
* python/py-symtab.c (stpy_get_producer): Fetch producer from compunit.
* source.c (forget_cached_source_info_for_objfile): Fetch debugformat
and macro_table from compunit.
* symfile-debug.c (debug_qf_find_last_source_symtab): Change result
type to "struct compunit_symtab *". All callers updated.
(debug_qf_lookup_symbol): Ditto.
(debug_qf_find_pc_sect_compunit_symtab): Renamed from
debug_qf_find_pc_sect_symtab, change result type to
"struct compunit_symtab *". All callers updated.
* symfile.c (allocate_symtab): Delete objfile argument.
New argument cust.
(allocate_compunit_symtab): New function.
(add_compunit_symtab_to_objfile): New function.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Change result type to "struct compunit_symtab *". All uses updated.
<find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All uses updated.
* symmisc.c (print_objfile_statistics): Compute blockvector count in
separate loop.
(dump_symtab_1): Update test for primary source symtab.
(maintenance_info_symtabs): Update to handle compunit symtabs.
(maintenance_check_symtabs): Ditto.
* symtab.c (set_primary_symtab): Delete.
(compunit_primary_filetab): New function.
(compunit_language): New function.
(iterate_over_some_symtabs): Change type of arguments "first",
"after_last" to "struct compunit_symtab *". All callers updated.
Update to loop over symtabs in each compunit.
(error_in_psymtab_expansion): Rename symtab argument to cust,
and change type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_compunit_symtab): Renamed from find_pc_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_line): Only loop over symtabs within selected compunit
instead of all symtabs in the objfile.
* symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab.
<compunit_symtab> New member.
<block_line_section>: Moved to compunit_symtab.
<locations_valid>: Ditto.
<epilogue_unwind_valid>: Ditto.
<macro_table>: Ditto.
<dirname>: Ditto.
<debugformat>: Ditto.
<producer>: Ditto.
<objfile>: Ditto.
<call_site_htab>: Ditto.
<includes>: Ditto.
<user>: Ditto.
<primary>: Delete
(SYMTAB_COMPUNIT): New macro.
(SYMTAB_BLOCKVECTOR): Update definition.
(SYMTAB_OBJFILE): Update definition.
(SYMTAB_DIRNAME): Update definition.
(struct compunit_symtab): New type. Common members among all source
symtabs within a compilation unit moved here. All uses updated.
(COMPUNIT_OBJFILE): New macro.
(COMPUNIT_FILETABS): New macro.
(COMPUNIT_DEBUGFORMAT): New macro.
(COMPUNIT_PRODUCER): New macro.
(COMPUNIT_DIRNAME): New macro.
(COMPUNIT_BLOCKVECTOR): New macro.
(COMPUNIT_BLOCK_LINE_SECTION): New macro.
(COMPUNIT_LOCATIONS_VALID): New macro.
(COMPUNIT_EPILOGUE_UNWIND_VALID): New macro.
(COMPUNIT_CALL_SITE_HTAB): New macro.
(COMPUNIT_MACRO_TABLE): New macro.
(ALL_COMPUNIT_FILETABS): New macro.
(compunit_symtab_ptr): New typedef.
(DEF_VEC_P (compunit_symtab_ptr)): New vector type.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update expected output.
This adds the 'regset' parameter to the iterator callback.
Consequently the 'regset_from_core_section' method is dropped for all
targets that provide the iterator method.
This change prepares for replacing regset_from_core_section
everywhere, thereby eliminating one gdbarch interface. Since the
iterator is usually no more complex than regset_from_core_section
alone, targets that previously didn't define core_regset_sections will
then gain multi-arch capable core file generation support without
increased complexity.
gdb/ChangeLog:
* gdbarch.sh (iterate_over_regset_sections_cb): Add regset
parameter.
* gdbarch.h: Regenerate.
* corelow.c (sniff_core_bfd): Don't sniff if gdbarch has a regset
iterator.
(get_core_register_section): Add parameter 'regset' and use it, if
set. Add parameter 'min_size' and verify the bfd section size
against it.
(get_core_registers_cb): Add parameter 'regset' and pass it to
get_core_register section. For the "standard" register sections
".reg" and ".reg2", set an appropriate default for human_name.
(get_core_registers): Don't abort when the gdbarch has an iterator
but no regset_from_core_section. Add NULL/0 for parameters
'regset'/'min_size' in calls to get_core_register_section.
* linux-tdep.c (linux_collect_regset_section_cb): Add parameter
'regset' and use it instead of calling the
regset_from_core_section gdbarch method.
* i386-tdep.h (struct gdbarch_tdep): Add field 'fpregset'.
* i386-tdep.c (i386_supply_xstateregset)
(i386_collect_xstateregset, i386_xstateregset): Moved to
i386-linux-tdep.c.
(i386_regset_from_core_section): Drop handling for .reg-xfp and
.reg-xstate.
(i386_gdbarch_init): Set tdep field 'fpregset'. Enable generic
core file support only if the regset iterator hasn't been set.
* i386-linux-tdep.c (i386_linux_supply_xstateregset)
(i386_linux_collect_xstateregset, i386_linux_xstateregset): New.
Moved from i386-tdep.c and renamed to *_linux*.
(i386_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation. Allow any .reg-xstate size when reading
from a core file.
* amd64-tdep.c (amd64_supply_xstateregset)
(amd64_collect_xstateregset, amd64_xstateregset): Moved to
amd64-linux-tdep.c.
(amd64_regset_from_core_section): Remove.
(amd64_init_abi): Set new tdep field 'fpregset'. No longer
install an amd64-specific regset_from_core_section gdbarch method.
* amd64-linux-tdep.c (amd64_linux_supply_xstateregset)
(amd64_linux_collect_xstateregset, amd64_linux_xstateregset): New.
Moved from amd64-tdep.c and renamed to *_linux*.
(amd64_linux_iterate_over_regset_sections): Add regset parameter
to each callback invocation. Allow any .reg-xstate size when
reading from a core file.
* arm-linux-tdep.c (arm_linux_regset_from_core_section): Remove.
(arm_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation.
(arm_linux_init_abi): No longer set the regset_from_core_section
gdbarch method.
* ppc-linux-tdep.c (ppc_linux_regset_from_core_section): Remove.
(ppc_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation.
(ppc_linux_init_abi): No longer set the regset_from_core_section
gdbarch method.
* s390-linux-tdep.c (struct gdbarch_tdep): Remove the fields
gregset, sizeof_gregset, fpregset, and sizeof_fpregset.
(s390_regset_from_core_section): Remove.
(s390_iterate_over_regset_sections): Add regset parameter to each
callback invocation.
(s390_gdbarch_init): No longer set the regset_from_core_section
gdbarch method. Drop initialization of deleted tdep fields.
We would like to wrap examples, output or code snippet in comments with
blank lines, and move */ to a new line if the comment is ended with the
example.
gdb:
2014-08-20 Yao Qi <yao@codesourcery.com>
* amd64-tdep.c (amd64_classify): Add a blank line after the
example. Move "*/" to a new line.
* arm-tdep.c (arm_vfp_cprc_sub_candidate): Likewise.
* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Likewise.
* dwarf2read.c (psymtab_include_file_name): Likewise.
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
Removes the 'arch' field from the regset structure, since it
represents the only "dynamic" data in a regset. It was referenced in
some regset supply- and collect routines, to get access to the gdbarch
associated with the regset. Naturally, the affected routines always
have access to the regcache to be supplied to or collected from. Thus
the gdbarch associated with that regcache can be used instead.
This patch adds support for the Intel(R) Advanced Vector
Extensions 512 (Intel(R) AVX-512) registers. Native and remote
debugging are covered by this patch.
Intel(R) AVX-512 is an extension to AVX to support 512-bit wide
SIMD registers in 64-bit mode (XMM0-XMM31, YMM0-YMM31, ZMM0-ZMM31).
The number of available registers in 32-bit mode is still 8
(XMM0-7, YMM0-7, ZMM0-7). The lower 256-bits of the ZMM registers
are aliased to the respective 256-bit YMM registers. The lower
128-bits are aliased to the respective 128-bit XMM registers.
There are also 8 new, dedicated mask registers (K0-K7) in both 32-bit
mode and 64-bit mode.
For more information please see
Intel(R) Developer Zone: Intel(R) AVX
http://software.intel.com/en-us/intel-isa-extensions#pid-16007-1495
Intel(R) Architecture Instruction Set Extensions Programming Reference:
http://software.intel.com/en-us/file/319433-017pdf
2014-04-24 Michael Sturm <michael.sturm@mintel.com>
Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add
AVX512 registers.
(amd64_linux_read_description): Add code to handle AVX512 xstate
mask and return respective tdesc.
* amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c
and features/i386/x32-avx512-linux.c.
(amd64_linux_gregset_reg_offset): Add AVX512 registers.
(amd64_linux_core_read_description): Add code to handle AVX512
xstate mask and return respective tdesc.
(_initialize_amd64_linux_tdep): Initialize AVX512 tdesc.
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum
calculation.
(AMD64_LINUX_NUM_REGS): Adjust to new number of registers.
(tdesc_amd64_avx512_linux): New prototype.
(tdesc_x32_avx512_linux): Likewise.
* amd64-tdep.c: Include features/i386/amd64-avx512.c and
features/i386/x32-avx512.c.
(amd64_ymm_avx512_names): New register names for pseudo
registers YMM16-31.
(amd64_ymmh_avx512_names): New register names for raw registers
YMMH16-31.
(amd64_k_names): New register names for K registers.
(amd64_zmmh_names): New register names for ZMM raw registers.
(amd64_zmm_names): New registers names for ZMM pseudo registers.
(amd64_xmm_avx512_names): New register names for XMM16-31
registers.
(amd64_pseudo_register_name): Add code to return AVX512 pseudo
registers.
(amd64_init_abi): Add code to intitialize AVX512 tdep variables
if feature is present.
(_initialize_amd64_tdep): Call AVX512 tdesc initializers.
* amd64-tdep.h (enum amd64_regnum): Add AVX512 registers.
(AMD64_NUM_REGS): Adjust to new number of registers.
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of
registers supplied via XSTATE by AVX512 registers.
(i386_linux_read_description): Add case for AVX512.
* i386-linux-tdep.c: Include i386-avx512-linux.c.
(i386_linux_gregset_reg_offset): Add AVX512 registers.
(i386_linux_core_read_description): Add case for AVX512.
(i386_linux_init_abi): Install supported register note section
for AVX512.
(_initialize_i386_linux_tdep): Add call to tdesc init function for
AVX512.
* i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of
registers to be number of zmm7h + 1.
(tdesc_i386_avx512_linux): Add tdesc for AVX512 registers.
* i386-tdep.c: Include features/i386/i386-avx512.c.
(i386_zmm_names): Add ZMM pseudo register names array.
(i386_zmmh_names): Add ZMM raw register names array.
(i386_k_names): Add K raw register names array.
(num_lower_zmm_regs): Add constant for the number of lower ZMM
registers. AVX512 has 16 more ZMM registers than there are YMM
registers.
(i386_zmmh_regnum_p): Add function to look up register number of
ZMM raw registers.
(i386_zmm_regnum_p): Likewise for ZMM pseudo registers.
(i386_k_regnum_p): Likewise for K raw registers.
(i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw
registers added by AVX512.
(i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo
registers added by AVX512.
(i386_xmm_avx512_regnum_p): Likewise for additional XMM registers
added by AVX512.
(i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31.
(i386_pseudo_register_name): Add ZMM pseudo registers.
(i386_zmm_type): Construct and return vector registers type for ZMM
registers.
(i386_pseudo_register_type): Return appropriate type for YMM16-31,
ZMM0-31 pseudo registers and K registers.
(i386_pseudo_register_read_into_value): Add code to read K, ZMM
and YMM16-31 registers from register cache.
(i386_pseudo_register_write): Add code to write K, ZMM and
YMM16-31 registers.
(i386_register_reggroup_p): Add code to include/exclude AVX512
registers in/from respective register groups.
(i386_validate_tdesc_p): Handle AVX512 feature, add AVX512
registers if feature is present in xcr0.
(i386_gdbarch_init): Add code to initialize AVX512 feature
variables in tdep structure, wire in pseudo registers and call
initialize_tdesc_i386_avx512.
* i386-tdep.h (struct gdbarch_tdep): Add AVX512 related
variables.
(i386_regnum): Add AVX512 registers.
(I386_SSE_NUM_REGS): New define for number of SSE registers.
(I386_AVX_NUM_REGS): Likewise for AVX registers.
(I386_AVX512_NUM_REGS): Likewise for AVX512 registers.
(I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are
512 bits wide.
(i386_xmm_avx512_regnum_p): New prototype for register look up.
(i386_ymm_avx512_regnum_p): Likewise.
(i386_k_regnum_p): Likewise.
(i386_zmm_regnum_p): Likewise.
(i386_zmmh_regnum_p): Likewise.
* i387-tdep.c : Update year in copyright notice.
(xsave_ymm_avx512_offset): New table for YMM16-31 offsets in
XSAVE buffer.
(XSAVE_YMM_AVX512_ADDR): New macro.
(xsave_xmm_avx512_offset): New table for XMM16-31 offsets in
XSAVE buffer.
(XSAVE_XMM_AVX512_ADDR): New macro.
(xsave_avx512_k_offset): New table for K register offsets in
XSAVE buffer.
(XSAVE_AVX512_K_ADDR): New macro.
(xsave_avx512_zmm_h_offset): New table for ZMM register offsets
in XSAVE buffer.
(XSAVE_AVX512_ZMM_H_ADDR): New macro.
(i387_supply_xsave): Add code to supply AVX512 registers to XSAVE
buffer.
(i387_collect_xsave): Add code to collect AVX512 registers from
XSAVE buffer.
* i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number
of XMM16-31 registers.
(I387_NUM_K_REGS): New define for number of K registers.
(I387_K0_REGNUM): New define for K0 register number.
(I387_NUM_ZMMH_REGS): New define for number of ZMMH registers.
(I387_ZMM0H_REGNUM): New define for ZMM0H register number.
(I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31
registers.
(I387_YMM16H_REGNUM): New define for YMM16H register number.
(I387_XMM16_REGNUM): New define for XMM16 register number.
(I387_YMM0_REGNUM): New define for YMM0 register number.
(I387_KEND_REGNUM): New define for last K register number.
(I387_ZMMENDH_REGNUM): New define for last ZMMH register number.
(I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register
number.
(I387_XMM_AVX512_END_REGNUM): New define for XMM31 register
number.
* common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE
size.
* features/Makefile: Add AVX512 related files.
* features/i386/32bit-avx512.xml: New file.
* features/i386/64bit-avx512.xml: Likewise.
* features/i386/amd64-avx512-linux.c: Likewise.
* features/i386/amd64-avx512-linux.xml: Likewise.
* features/i386/amd64-avx512.c: Likewise.
* features/i386/amd64-avx512.xml: Likewise.
* features/i386/i386-avx512-linux.c: Likewise.
* features/i386/i386-avx512-linux.xml: Likewise.
* features/i386/i386-avx512.c: Likewise.
* features/i386/i386-avx512.xml: Likewise.
* features/i386/x32-avx512-linux.c: Likewise.
* features/i386/x32-avx512-linux.xml: Likewise.
* features/i386/x32-avx512.c: Likewise.
* features/i386/x32-avx512.xml: Likewise.
* regformats/i386/amd64-avx512-linux.dat: New file.
* regformats/i386/amd64-avx512.dat: Likewise.
* regformats/i386/i386-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx512.dat: Likewise.
* regformats/i386/x32-avx512-linux.dat: Likewise.
* regformats/i386/x32-avx512.dat: Likewise.
* NEWS: Add note about new support for AVX512.
testsuite/
* Makefile.in (EXECUTABLES): Added i386-avx512.
* gdb.arch/i386-avx512.c: New file.
* gdb.arch/i386-avx512.exp: Likewise.
gdbserver/
* Makefile.in: Added rules to handle new files
i386-avx512.c i386-avx512-linux.c amd64-avx512.c
amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c.
* configure.srv (srv_i386_regobj): Add i386-avx512.o.
(srv_i386_linux_regobj): Add i386-avx512-linux.o.
(srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o.
(srv_amd64_linux_regobj): Add amd64-avx512-linux.o and
x32-avx512-linux.o.
(srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml.
(srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and
i386/x32-avx512.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and
i386/x32-avx512-linux.xml.
* i387-fp.c (num_avx512_k_registers): New constant for number
of K registers.
(num_avx512_zmmh_low_registers): New constant for number of
lower ZMM registers (0-15).
(num_avx512_zmmh_high_registers): New constant for number of
higher ZMM registers (16-31).
(num_avx512_ymmh_registers): New contant for number of higher
YMM registers (ymm16-31 added by avx521 on x86_64).
(num_avx512_xmm_registers): New constant for number of higher
XMM registers (xmm16-31 added by AVX512 on x86_64).
(struct i387_xsave): Add space for AVX512 registers.
(i387_cache_to_xsave): Change raw buffer size to 64 characters.
Add code to handle AVX512 registers.
(i387_xsave_to_cache): Add code to handle AVX512 registers.
* linux-x86-low.c (init_registers_amd64_avx512_linux): New
prototypei from generated file.
(tdesc_amd64_avx512_linux): Likewise.
(init_registers_x32_avx512_linux): Likewise.
(tdesc_x32_avx512_linux): Likewise.
(init_registers_i386_avx512_linux): Likewise.
(tdesc_i386_avx512_linux): Likewise.
(x86_64_regmap): Add AVX512 registers.
(x86_linux_read_description): Add code to handle AVX512 XSTATE
mask.
(initialize_low_arch): Add code to initialize AVX512 registers.
doc/
* gdb.texinfo (i386 Features): Add description of AVX512
registers.
Change-Id: Ifc4c08c76b85dbec18d02efdbe6182e851584438
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
Add new methods to gdbarch for analyzing the instruction at a given address.
Implement those methods for i386 and amd64 architectures.
This is needed by "record btrace" to detect function calls in the
execution trace.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
(amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
(amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
to gdbarch.
* i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
(i386_insn_is_jump, i386_jmp_p): New.
(i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
insn_is_jump to gdbarch.
* gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
* gdbarch.h: Regenerated.
* gdbarch.c: Regenerated.
* arch-utils.h (default_insn_is_call, default_insn_is_ret)
(default_insn_is_jump): New.
* arch-utils.c (default_insn_is_call, default_insn_is_ret)
(default_insn_is_jump): New.
This patch extends the current generic parser for SystemTap SDT probe
arguments. It can be almost considered a cleanup, but the main point of
it is actually to allow the generic parser to accept multiple prefixes
and suffixes for the its operands (i.e., integers, register names, and
register indirection).
I have chosen to implement this as a list of const strings, and declare
this list as "static" inside each target's method used to initialize
gdbarch.
This patch is actually a preparation for an upcoming patch for ARM,
which implements the support for multiple integer prefixes (as defined
by ARM's asm spec). And AArch64 will also need this, for the same
reason.
This patch was regtested on all architectures that it touches (i.e.,
i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found.
2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com>
* amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe
argument prefixes and suffixes. Initialize gdbarch with them.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (stap_integer_prefix, stap_integer_suffix)
(stap_register_prefix, stap_register_suffix)
(stap_register_indirection_prefix)
(stap_register_indirection_suffix): Declare as "const char *const
*" instead of "const char *". Adjust printing function. Rename
all of the variables to the plural.
(pstring_list): New function.
* i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe
argument prefixes and suffixes. Initialize gdbarch with them.
* ia64-linux-tdep.c (ia64_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* stap-probe.c (stap_is_generic_prefix): New function.
(stap_is_register_prefix): Likewise.
(stap_is_register_indirection_prefix): Likewise.
(stap_is_integer_prefix): Likewise.
(stap_generic_check_suffix): Likewise.
(stap_check_integer_suffix): Likewise.
(stap_check_register_suffix): Likewise.
(stap_check_register_indirection_suffix): Likewise.
(stap_parse_register_operand): Remove unecessary declarations for
variables holding prefix and suffix information. Use the new
functions listed above for checking for prefixes and suffixes.
(stap_parse_single_operand): Likewise.
Like when stepping, the current stack frame location is expected to be
printed as result of tfind command, if that results in moving to a
different function. In tfind_1 we see:
if (from_tty
&& (has_stack_frames () || traceframe_number >= 0))
{
enum print_what print_what;
/* NOTE: in imitation of the step command, try to determine
whether we have made a transition from one function to
another. If so, we'll print the "stack frame" (ie. the new
function and it's arguments) -- otherwise we'll just show the
new source line. */
if (frame_id_eq (old_frame_id,
get_frame_id (get_current_frame ())))
print_what = SRC_LINE;
else
print_what = SRC_AND_LOC;
print_stack_frame (get_selected_frame (NULL), 1, print_what, 1);
do_displays ();
}
However, when we haven't collected any registers in the tracepoint
(collect $regs), that doesn't actually work:
(gdb) tstart
(gdb) info tracepoints
Num Type Disp Enb Address What
1 tracepoint keep y 0x080483b7 in func0
at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28
collect testload
installed on target
2 tracepoint keep y 0x080483bc in func1
at ../.././../git/gdb/testsuite/gdb.trace/circ.c:32
collect testload
installed on target
(gdb) c
Continuing.
Breakpoint 3, end () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:72
72 }
(gdb) tstop
(gdb) tfind start
Found trace frame 0, tracepoint 1
#0 func0 () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28
28 }
(gdb) tfind
Found trace frame 1, tracepoint 2
32 }
(gdb)
When we don't have info about the stack available
(UNWIND_UNAVAILABLE), frames end up with outer_frame_id as frame ID.
And in the scenario above, the issue is that both frames before and
after the second tfind (the frames for func0 an func1) have the same
id (outer_frame_id), so the frame_id_eq check returns false, even
though the frames were of different functions. GDB knows that,
because the PC is inferred from the tracepoint's address, even if no
registers were collected.
To fix this, this patch adds support for frame ids with a valid code
address, but <unavailable> stack address, and then makes the unwinders
use that instead of the catch-all outer_frame_id for such frames. The
frame_id_eq check in tfind_1 then automatically does the right thing
as expected.
I tested with --directory=gdb.trace/ , before/after the patch, and
compared the resulting gdb.logs, then adjusted the tests to expect the
extra output that came out. Turns out that was only circ.exp, the
original test that actually brought this issue to light.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-12-17 Pedro Alves <palves@redhat.com>
* frame.h (enum frame_id_stack_status): New enum.
(struct frame_id) <stack_addr>: Adjust comment.
<stack_addr_p>: Delete field, replaced with ...
<stack_status>: ... this new field.
(frame_id_build_unavailable_stack): Declare.
* frame.c (frame_addr_hash, fprint_field, outer_frame_id)
(frame_id_build_special): Adjust.
(frame_id_build_unavailable_stack): New function.
(frame_id_build, frame_id_build_wild): Adjust.
(frame_id_p, frame_id_eq, frame_id_inner): Adjust to take into
account frames with unavailable stack.
* amd64-tdep.c (amd64_frame_this_id)
(amd64_sigtramp_frame_this_id, amd64_epilogue_frame_this_id): Use
frame_id_build_unavailable_stack.
* dwarf2-frame.c (dwarf2_frame_this_id): Likewise.
* i386-tdep.c (i386_frame_this_id, i386_epilogue_frame_this_id)
(i386_sigtramp_frame_this_id): Likewise.
gdb/testsuite/
2013-12-17 Pedro Alves <palves@redhat.com>
* gdb.trace/circ.exp: Expect frame info to be printed when
switching between frames with unavailable stack, but different
functions.
2013-06-24 Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset):
Add MPX registers.
(amd64_linux_read_description): Add initialization for MPX and
AVX independently.
* amd64-linux-tdep.c: Includes features/i386/amd64-mpx-linux.c.
(amd64_linux_gregset_reg_offset): Add MPX registers.
(amd64_linux_core_read_description): Add initialization for MPX
registers.
(_initialize_amd64_linux_tdep): Initialize MPX targets.
* amd64-linux-tdep.h (AMD64_LINUX_RAX_REGNUM): Set it to the last
register on the list.
(tdesc_amd64_mpx_linux) Add new target for MPX.
* amd64-tdep.c: Includes features/i386/amd64-mpx.c.
(amd64_mpx_names): MPX register names.
(amd64_init_abi): Add MPX register while initializing the ABI.
(_initialize_amd64_tdep): Initialize MPX targets.
* amd64-tdep.h (amd64_regnum): Add MPX registers.
(AMD64_NUM_REGS): Set number of registers taking MPX into account.
Change-Id: I4a785c181e2fb45e4086650b2f87426caeb2f800
Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
Conflicts:
gdb/ChangeLog
AMD64_R15_REGNUM when a register index is expected.
* amd64-windows-tdep.c (amd64_windows_dummy_call_integer_regs):
Substitute in array.
* amd64-tdep.c (amd64_dwarf_regmap): Ditto.
(amd64_push_arguments): Substitute in integer_regnum array.
This is no longer useful, as it was introduced to reuse the funcall
handling code in amd64-tdep.c in the context of x64-windows. But
we have since then changed the implementations to be completely
independent of each other.
This reverts the non-windows-specific part of the change called:
amd64: Integer parameters in function calls on Windows
(the x64-windows portion has already been reverted)
gdb/ChangeLog:
Revert:
* i386-tdep.h (enum amd64_reg_class): New, moved here from
amd64-tdep.c.
(struct gdbarch_tdep): Add fields call_dummy_num_integer_regs,
call_dummy_integer_regs, and classify.
* amd64-tdep.h (amd64_classify): Add declaration.
* amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant.
(amd64_reg_class): Delete, moved to i386-tdep.h.
(amd64_classify): Make non-static. Move declaration to amd64-tdep.h.
Replace call to amd64_classify by call to tdep->classify.
(amd64_push_arguments): Get the list of registers to use for
passing integer parameters from the gdbarch tdep structure,
rather than using a hardcoded one. Replace calls to amd64_classify
by calls to tdep->classify.
(amd64_push_dummy_call): Get the register number used for
the "hidden" argument from tdep->call_dummy_integer_regs.
(amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs
and tdep->call_dummy_integer_regs. Set tdep->classify.
This is no longer useful, as it was introduced to reuse the funcall
handling code in amd64-tdep.c in the context of x64-windows. But
we have since then changed the implementations to be completely
independent of each other.
This reverts the non-windows-specific part of the change called:
amd64-windows: memory args passed by pointer during function calls.
(the x64-windows portion has already been reverted)
gdb/ChangeLog:
Revert:
* i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer.
* amd64-tdep.c (amd64_push_arguments): Add handling of architectures
where tdep->memory_args_by_pointer is non-zero.
This is no longer useful, as it was introduced to reuse the funcall
handling code in amd64-tdep.c in the context of x64-windows. But
we have since then changed the implementations to be completely
independent of each other.
This reverts the non-windows-specific part of the change called:
amd64-windows: 32 bytes allocated on stack by caller for integer
parameter regs
(the x64-windows portion has already been reverted)
gdb/ChangeLog:
Revert:
* i386-tdep.h (struct gdbarch_tdep): Add new field
integer_param_regs_saved_in_caller_frame.
* amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on
stack if tdep->integer_param_regs_saved_in_caller_frame is set.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* amd64-tdep.c (amd64_x32_init_abi): Set sp_regnum_from_eax to
AMD64_RSP_REGNUM and pc_regnum_from_eax to AMD64_RIP_REGNUM.
* i386-tdep.c (i386_gdbarch_init): Initialize sp_regnum_from_eax
and pc_regnum_from_eax to -1. Update SP regnum from
sp_regnum_from_eax and PC regnum from pc_regnum_from_eax if
needed.
* i386-tdep.h (gdbarch_tdep): Add sp_regnum_from_eax and
pc_regnum_from_eax.
* i386-tdep.h (i386_pseudo_register_name): New prototype.
* i386-tdep.c (i386_pseudo_register_name): Make public.
* amd64-tdep.h (amd64_x32_init_abi): New prototype.
* amd64-tdep.c (amd64_dword_names): Add "eip".
(amd64_x32_pseudo_register_type): New function
(amd64_x32_init_abi): New function.
* breakpoint.h (bp_location): Add related_address member.
* inferior.h (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
* value.h (using_struct_return): Likewise.
* gdbarch.sh (return_value): Take a pointer to struct value
instead of struct type for the function requested.
* breakpoint.c (set_breakpoint_location_function): Initialize
related_address for bp_gnu_ifunc_resolver breakpoints.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the
requested function's address to gdbarch_return_value.
* eval.c (evaluate_subexp_standard): Pass the requested
function's address to using_struct_return.
* infcall.c (call_function_by_hand): Pass the requested
function's address to using_struct_return and
gdbarch_return_value.
* infcmd.c (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
(print_return_value): Update accordingly.
(finish_command_continuation): Likewise.
* stack.c (return_command): Pass the requested function's
address to using_struct_return and gdbarch_return_value.
* value.c (using_struct_return): Take a pointer to struct value
instead of struct type for the function requested. Pass the
requested function's address to gdbarch_return_value.
* python/py-finishbreakpoint.c (finish_breakpoint_object):
New function_value member, replacing function_type.
(bpfinishpy_dealloc): Update accordingly.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_init): Likewise. Record the requested function's
address.
* mips-tdep.c (mips_fval_reg): New enum.
(mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap
words put in GP registers.
(mips_o64_push_dummy_call): Update a comment.
(mips_o32_return_value): Take a pointer to struct value instead
of struct type for the function requested and use it to check if
using the MIPS16 calling convention. Return the designated
general purpose registers for floating-point values returned in
MIPS16 mode.
(mips_o64_return_value): Likewise.
* ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* alpha-tdep.c (alpha_return_value): Take a pointer to struct
value instead of struct type for the function requested.
* amd64-tdep.c (amd64_return_value): Likewise.
* amd64-windows-tdep.c (amd64_windows_return_value): Likewise.
* arm-tdep.c (arm_return_value): Likewise.
* avr-tdep.c (avr_return_value): Likewise.
* bfin-tdep.c (bfin_return_value): Likewise.
* cris-tdep.c (cris_return_value): Likewise.
* frv-tdep.c (frv_return_value): Likewise.
* h8300-tdep.c (h8300_return_value): Likewise.
(h8300h_return_value): Likewise.
* hppa-tdep.c (hppa32_return_value): Likewise.
(hppa64_return_value): Likewise.
* i386-tdep.c (i386_return_value): Likewise.
* ia64-tdep.c (ia64_return_value): Likewise.
* iq2000-tdep.c (iq2000_return_value): Likewise.
* lm32-tdep.c (lm32_return_value): Likewise.
* m32c-tdep.c (m32c_return_value): Likewise.
* m32r-tdep.c (m32r_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_return_value): Likewise.
* m68k-tdep.c (m68k_return_value): Likewise.
(m68k_svr4_return_value): Likewise.
* m88k-tdep.c (m88k_return_value): Likewise.
* mep-tdep.c (mep_return_value): Likewise.
* microblaze-tdep.c (microblaze_return_value): Likewise.
* mn10300-tdep.c (mn10300_return_value): Likewise.
* moxie-tdep.c (moxie_return_value): Likewise.
* mt-tdep.c (mt_return_value): Likewise.
* ppc-linux-tdep.c (ppc_linux_return_value): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise.
* rl78-tdep.c (rl78_return_value): Likewise.
* rs6000-aix-tdep.c (rs6000_return_value): Likewise.
* rx-tdep.c (rx_return_value): Likewise.
* s390-tdep.c (s390_return_value): Likewise.
* score-tdep.c (score_return_value): Likewise.
* sh-tdep.c (sh_return_value_nofpu): Likewise.
(sh_return_value_fpu): Likewise.
* sh64-tdep.c (sh64_return_value): Likewise.
* sparc-tdep.c (sparc32_return_value): Likewise.
* sparc64-tdep.c (sparc64_return_value): Likewise.
* spu-tdep.c (spu_return_value): Likewise.
* tic6x-tdep.c (tic6x_return_value): Likewise.
* v850-tdep.c (v850_return_value): Likewise.
* vax-tdep.c (vax_return_value): Likewise.
* xstormy16-tdep.c (xstormy16_return_value): Likewise.
* xtensa-tdep.c (xtensa_return_value): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/testsuite/
* gdb.base/return-nodebug.exp: Also test float and double types.
* amd64-tdep.c: Include features/i386/x32.c and
features/i386/x32-avx.c.
(_initialize_amd64_tdep): Call initialize_tdesc_x32 and
initialize_tdesc_x32_avx.
