Previously, backchain was read as a signed quantity, resulting in
addresses like 0xfffffffffffeded0 instead of 0xfffeded0 returned by
unwinder on 32-bit powerpc. While normally such addresses are masked
off, this causes problems for tracepoints, since 0xfffffffffffeded0
is considered unavailable.
Fixes a test failure in gdb.trace/entry-values.exp.
gdb/ChangeLog:
* corefile.c (safe_read_memory_unsigned_integer): New function.
* gdbcore.h (safe_read_memory_unsigned_integer): New prototype.
* rs6000-tdep.c (rs6000_frame_cache): Read backchain as unsigned.
gdb/ChangeLog:
* rs6000-tdep.c: Add "ax.h" and "ax-gdb.h" includes.
(rs6000_gen_return_address): New function.
(rs6000_gdbarch_init): Wire in the above.
This is an obvious patch to fix the following build error seen with
--enable-build-with-cxx:
../../src/gdb/rs6000-tdep.c: In function ‘rs6000_frame_cache* rs6000_frame_cache(frame_info*, void**)’:
../../src/gdb/rs6000-tdep.c:3242:15: error: invalid conversion from ‘void*’ to ‘rs6000_frame_cache*’ [-fpermissive]
return (*this_cache);
~^~~~~~~~~~~~
gdb/ChangeLog
* rs6000-tdep.c (rs6000_frame_cache): Explicitly cast return result
to avoid invalid conversion from void *.
Multitarget builds currently fail when:
(1) simulator support is enabled (the main --target supports target sim)
(2) powerpc is included in the --enable-targets list
(3) powerpc is not the main/default target (--target)
This is because the powerpc sim provides a non-standard API function
sim_spr_register_name which gdb/rs6000-tdep.c utilizes. Since the sim
does not yet support multitarget, only the sim (if one exists) for the
main target is built. When that target isn't powerpc, this function
is not available leading to linking errors:
rs6000-tdep.c:(.text+0x1e34d): undefined reference to
`sim_spr_register_name'
Fix this by only using that API if the sim linked in is the powerpc
sim.
gdb/ChangeLog:
2016-01-05 Pedro Alves <palves@redhat.com>
PR sim/13418
* configure.ac: Define WITH_PPC_SIM when linking in the sim and
the target is powerpc*.
* configure: Regenerate.
* config.in: Regenerate.
As reported by Ulrich here:
https://sourceware.org/ml/gdb-patches/2015-09/msg00604.html
The system compiler (gcc 4.1) in Centos 5 doesn't like that we cast to a
pointer to a type that doesn't exist. I see no real value in using this
kind iof construct over just using void *. So this patch changes the
tdep_info field to void * and removes the casts. Even in C++, we
should not need an explicit cast when assigning to a void *.
gdb/ChangeLog:
* gdbarch.sh (struct gdbarch_info): Change tdep_info's type to void *.
* gdbarch.h: Regenerate.
* i386-tdep.c (i386_gdbarch_init): Remove cast to
struct gdbarch_tdep_info *.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* ppc-linux-tdep (ppu2spu_sniffer): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
* spu-multiarch.c (spu_gdbarch): Likewise.
The ppc64 displaced step code can't handle atomic sequences. Fallback
to stepping over the breakpoint in-line if we detect one.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (displaced_step_prepare_throw): Return -1 if
gdbarch_displaced_step_copy_insn returns NULL. Update intro
comment.
* rs6000-tdep.c (LWARX_MASK, LWARX_INSTRUCTION, LDARX_INSTRUCTION)
(STWCX_MASK, STWCX_INSTRUCTION, STDCX_INSTRUCTION): Move higher up
in file.
(ppc_displaced_step_copy_insn): New function.
(ppc_displaced_step_fixup): Update comment.
(rs6000_gdbarch_init): Install ppc_displaced_step_copy_insn as
gdbarch_displaced_step_copy_insn hook.
* gdbarch.sh (displaced_step_copy_insn): Document what happens on
NULL return.
* gdbarch.h: Regenerate.
gdb/testsuite/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.arch/ppc64-atomic-inst.exp (do_test): New procedure, move
tests here.
(top level): Run do_test with and without displaced stepping.
This patch is mostly extracted from Pedro's C++ branch. It adds explicit
casts from integer to enum types, where it is really the intention to do
so. This could be because we are ...
* iterating on enum values (we need to iterate on an equivalent integer)
* converting from a value read from bytes (dwarf attribute, agent
expression opcode) to the equivalent enum
* reading the equivalent integer value from another language (Python/Guile)
An exception to that is the casts in regcache.c. It seems to me like
struct regcache's register_status field could be a pointer to an array of
enum register_status. Doing so would waste a bit of memory (4 bytes
used by the enum vs 1 byte used by the current signed char, for each
register). If we switch to C++11 one day, we can define the underlying
type of an enum type, so we could have the best of both worlds.
gdb/ChangeLog:
* arm-tdep.c (set_fp_model_sfunc): Add cast from integer to enum.
(arm_set_abi): Likewise.
* ax-general.c (ax_print): Likewise.
* c-exp.y (exp : string_exp): Likewise.
* compile/compile-loc2c.c (compute_stack_depth_worker): Likewise.
(do_compile_dwarf_expr_to_c): Likewise.
* cp-name-parser.y (demangler_special : DEMANGLER_SPECIAL start):
Likewise.
* dwarf2expr.c (execute_stack_op): Likewise.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
(disassemble_dwarf_expression): Likewise.
* dwarf2read.c (dwarf2_add_member_fn): Likewise.
(read_array_order): Likewise.
(abbrev_table_read_table): Likewise.
(read_attribute_value): Likewise.
(skip_unknown_opcode): Likewise.
(dwarf_decode_macro_bytes): Likewise.
(dwarf_decode_macros): Likewise.
* eval.c (value_f90_subarray): Likewise.
* guile/scm-param.c (gdbscm_make_parameter): Likewise.
* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
* infrun.c (handle_command): Likewise.
* memory-map.c (memory_map_start_memory): Likewise.
* osabi.c (set_osabi): Likewise.
* parse.c (operator_length_standard): Likewise.
* ppc-linux-tdep.c (ppc_canonicalize_syscall): Likewise, and use
single return point.
* python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise.
* python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
(gdbpy_lookup_global_symbol): Likewise.
* record-full.c (record_full_restore): Likewise.
* regcache.c (regcache_register_status): Likewise.
(regcache_raw_read): Likewise.
(regcache_cooked_read): Likewise.
* rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
* symtab.c (initialize_ordinary_address_classes): Likewise.
* target-debug.h (target_debug_print_signals): Likewise.
* utils.c (do_restore_current_language): Likewise.
We concluded that gdbarch_in_function_epilogue_p is misnamed, since it
returns true if the given PC is one instruction after the one that
destroyed the stack (which isn't necessarily inside an epilogue),
therefore it should be renamed to stack_frame_destroyed_p.
I also took the liberty of renaming the arch-specific implementations to
*_stack_frame_destroyed_p as well for consistency.
gdb:
2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
* amd64-tdep.c: Replace in_function_epilogue_p with
stack_frame_destroyed_p throughout.
* arch-utils.c: Ditto.
* arch-utils.h: Ditto.
* arm-tdep.c: Ditto.
* breakpoint.c: Ditto.
* gdbarch.sh: Ditto.
* hppa-tdep.c: Ditto.
* i386-tdep.c: Ditto.
* mips-tdep.c: Ditto.
* nios2-tdep.c: Ditto.
* rs6000-tdep.c: Ditto.
* s390-linux-tdep.c: Ditto.
* score-tdep.c: Ditto.
* sh-tdep.c: Ditto.
* sparc-tdep.c: Ditto.
* sparc-tdep.h: Ditto.
* sparc64-tdep.c: Ditto.
* spu-tdep.c: Ditto.
* tic6x-tdep.c: Ditto.
* tilegx-tdep.c: Ditto.
* xstormy16-tdep.c: Ditto.
* gdbarch.c, gdbarch.h: Re-generated.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
This normalizes some exception catch blocks that check for ex.reason
to look like this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ALL)
{
...
}
if (ex.reason < 0)
{
...
}
~~~
This is a preparation step for running a script that converts all
TRY_CATCH uses to look like this instead:
~~~
TRY
{
...
}
CATCH (ex, RETURN_MASK_ALL)
{
...
}
END_CATCH
~~~
The motivation for that change is being able to reimplent TRY/CATCH in
terms of C++ try/catch.
This commit makes it so that:
- no condition other than ex.reason < 0 is checked in the if
predicate
- there's no "else" block to check whether no exception was caught
- there's no code between the TRY_CATCH (TRY) block and the
'if (ex.reason < 0)' block (CATCH).
- the exception object is no longer referred to outside the if/catch
block. Note the local volatile exception objects that are
currently defined inside functions that use TRY_CATCH will
disappear. In cases it's more convenient to still refer to the
exception outside the catch block, a new non-volatile local is
added and copy to that object is made within the catch block.
The following patches should make this all clearer.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
(amd64_epilogue_frame_cache): Normal exception handling code.
* break-catch-throw.c (check_status_exception_catchpoint)
(re_set_exception_catchpoint): Ditto.
* cli/cli-interp.c (safe_execute_command):
* cli/cli-script.c (script_from_file): Ditto.
* compile/compile-c-symbols.c (generate_c_for_for_one_variable):
Ditto.
* compile/compile-object-run.c (compile_object_run): Ditto.
* cp-abi.c (baseclass_offset): Ditto.
* cp-valprint.c (cp_print_value): Ditto.
* exceptions.c (catch_exceptions_with_msg):
* frame-unwind.c (frame_unwind_try_unwinder): Ditto.
* frame.c (get_frame_address_in_block_if_available): Ditto.
* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
(i386_sigtramp_frame_cache): Ditto.
* infcmd.c (post_create_inferior): Ditto.
* linespec.c (parse_linespec, find_linespec_symbols):
* p-valprint.c (pascal_object_print_value): Ditto.
* parse.c (parse_expression_for_completion): Ditto.
* python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
* remote.c (remote_get_noisy_reply): Ditto.
* s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
* solib-svr4.c (solib_svr4_r_map): Ditto.
This commit introduces a new inline common function "startswith"
which takes two string arguments and returns nonzero if the first
string starts with the second. It also updates the 295 places
where this logic was written out longhand to use the new function.
gdb/ChangeLog:
* common/common-utils.h (startswith): New inline function.
All places where this logic was used updated to use the above.
In C++, we can't do arithmetic on enums. This patch fixes build errors like:
src/gdb/i386-tdep.c: In function ‘int i386_stap_parse_special_token(gdbarch*, stap_parse_info*)’:
src/gdb/i386-tdep.c:4309:7: error: no match for ‘operator++’ (operand type is ‘i386_stap_parse_special_token(gdbarch*, stap_parse_info*)::<anonymous enum>’)
++current_state;
^
...
src/gdb/rs6000-tdep.c:4265:18: error: no match for ‘operator++’ (operand type is ‘powerpc_vector_abi’)
src/gdb/arm-tdep.c:9428:71: error: no match for ‘operator++’ (operand type is ‘arm_float_model’)
src/gdb/arm-tdep.c:9465:64: error: no match for ‘operator++’ (operand type is ‘arm_abi_kind’)
...
gdb/ChangeLog:
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
* arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
local used to iterate over enums.
* completer.c (signal_completer): Likewise.
* i386-tdep.c (i386_stap_parse_special_token): Likewise.
* rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
* tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
* tui/tui-layout.c (next_layout, prev_layout): Likewise.
* tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
(tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
* tui-wingeneral.c (tui_refresh_all): Likewise.
The problem is that rs6000_frame_cache attempts to read the stack backchain via
read_memory_unsigned_integer, which throws an exception if the stack pointer is
invalid. With this patch, it calls safe_read_memory_integer instead, which
doesn't throw an exception and allows for safe handling of that situation.
gdb/ChangeLog
2014-09-12 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Ulrich Weigand <uweigand@de.ibm.com>
PR tdep/17379
* rs6000-tdep.c (rs6000_frame_cache): Use safe_read_memory_integer
instead of read_memory_unsigned_integer.
gdb/testcase/ChangeLog
2014-09-12 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
PR tdep/17379
* gdb.arch/powerpc-stackless.S: New file.
* gdb.arch/powerpc-stackless.exp: New file.
The regset structure's 'descr' field is intended to represent some
kind of "register map". Thus, before making more use of it, this
change renames it to 'regmap' and adjusts the comment appropriately.
(See: https://sourceware.org/ml/gdb-patches/2014-05/msg00664.html)
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
This change corrects GPR frame offset calculation for the e500v2
processor. On this target, featuring the SPE APU, GPRs are 64-bit and
are held in stack frames whole with the use of `evstdd' and `evldd'
instructions. Their integer 32-bit part occupies the low-order word and
therefore its offset varies between the two endiannesses possible.
* rs6000-tdep.c (rs6000_frame_cache): Correct little-endian GPR
offset into SPE pseudo registers.
This is the first patch of a series to implement support for the
PowerPC ELFv2 ABI. While powerpc64le-linux will use ELFv2, and
the existing powerpc64-linux code will continue to use ELFv1,
in theory ELFv2 is also defined for big-endian systems (and
ELFv1 was also defined for little-endian systems).
Therefore this patch adds a new tdep->elf_abi variable to decide
which ABI version to use. This is detected from the ELF header
e_flags value; if this is not present, we default to ELFv2 on
little-endian and ELFv1 otherwise.
This patch does not yet introduce any actual difference in GDB's
handling of the two ABIs. Those will be added by the remainder
of this patch series.
For an overview of the changes in ELFv2, have a look at the
comments in the patch series that added ELFv2 to GCC, starting at:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01144.html
gdb/ChangeLog:
* ppc-tdep.h (enum powerpc_elf_abi): New data type.
(struct gdbarch_tdep): New member elf_abi.
* rs6000-tdep.c: Include "elf/ppc64.h".
(rs6000_gdbarch_init): Detect ELF ABI version.
The powerpc64le-linux ABI specifies that when a 128-bit DFP value is
passed in a pair of floating-point registers, the first register holds
the most-significant part of the value. This is as opposed to the
usual rule on little-endian systems, where the first register would
hold the least-significant part.
This affects two places in GDB, the read/write routines for the
128-bit DFP pseudo-registers, and the function call / return
sequence. For the former, current code already distinguishes
between big- and little-endian targets, but gets the latter
wrong. This is presumably because *GCC* also got it wrong,
and GDB matches the old GCC behavior. But GCC is now fixed:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg02145.html
so GDB needs to be fixed too. (Old code shouldn't really be
an issue since there is no code "out there" so far that uses
dfp128 on little-endian ...)
gdb/ChangeLog:
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
within a register pair holding a DFP 128-bit value on little-endian.
(ppc64_sysv_abi_return_value_base): Likewise.
* rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
(dfp_pseudo_register_write): Likewise.
gdb/testsuite/ChangeLog:
* gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
Many VSX test were failing on powerpc64le-linux, since -as opposed to the
AltiVec tests- there never were little-endian versions of the test patterns.
This patch adds such patterns, along the lines of altivec-regs.exp.
In addition, there is an actual code change required: For those VSX
registers that overlap a floating-point register, the FP register
overlaps the most-significant half of the VSX register both on big-
and little-endian systems. However, on little-endian systems, that
half is stored at an offset of 8 bytes (not 0). This works already
for the "real" FP registers, but current code gets it wrong for
the "extended" pseudo FP register GDB generates for the second
half of the VSX register bank.
This patch updates the corresponding pseudo read/write routines
to take the appropriate offset into consideration.
gdb/ChangeLog:
* rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
of the overlapped FP register within the VSX register on little-
endian platforms.
(efpr_pseudo_register_write): Likewise.
gdb/testsuite/ChangeLog:
* gdb.arch/vsx-regs.exp: Check target endianness. Provide variants
of the test patterns for use on little-endian systems.
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.
ELFv2 needs different plt call stubs to ELFv1, register usage differs
too. When I added these to ld I changed register usage in the ELFv1
stubs as well, simplifying the linker code and (perhaps) future
maintenance. All well and good, but this means gdb needs to cope with
more stub variants. This patch also handles skipping over addis/addi
setting up r2 in ELFv2 global entry code. We want breakpoints to be
set past this point to catch calls via the local entry point.
* ppc64-tdep.c (ppc64_plt_entry_point): Renamed from..
(ppc64_desc_entry_point): ..this. Update comments here and at
call points.
(ppc64_standard_linkage1, ppc64_standard_linkage2,
ppc64_standard_linkage3): Update comments.
(ppc64_standard_linkage4, ppc64_standard_linkage5,
(ppc64_standard_linkage6, ppc64_standard_linkage7): New insn
patterns.
(ppc64_standard_linkage4_target): New function.
(ppc64_skip_trampoline_code): Skip ELFv2 patterns too.
* rs6000-tdep.c (skip_prologue): Skip ELFv2 r2 setup. Correct
nop match. Fix comment wrap.
This adds -Wold-style-declaration to gdb's list of warnings.
It turns out that a few places use "const static" rather than
"static const". The former is deprecated according to the C standard.
Tested by rebuilding with --enable-targets=all on x86-64 Fedora 18.
* configure.ac (build_warnings): Add -Wold-style-declaration.
* configure: Rebuild.
* dsrec.c (make_srec): Use "static const", not "const static".
* h8300-tdep.c (h8300_breakpoint_from_pc): Use "static const",
not "const static".
* mi/mi-parse.c (mi_no_values, mi_simple_values, mi_all_values):
Use "static const", not "const static".
* mn10300-tdep.c (mn10300_breakpoint_from_pc): Use "static const",
not "const static".
* moxie-tdep.c (moxie_breakpoint_from_pc): Use "static const",
not "const static".
* rs6000-tdep.c (rs6000_breakpoint_from_pc): Use "static const",
not "const static".
* v850-tdep.c (v850_breakpoint_from_pc): Use "static const",
not "const static".
(v850_dbtrap_breakpoint_from_pc): Likewise.
* xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Use "static const",
not "const static".
* rs6000-tdep.c (read_insn): Add frame param, don't assume big-endian.
(ppc_insns_match_pattern): Add frame param. Avoid multiple
target mem reads on optional insns.
* ppc-linux-tdep.c (ppc_skip_trampoline_code): Update
ppc_insns_match_pattern calls.
* ppc64-tdep.c (ppc64_standard_linkage2, ppc64_standard_linkage3):
Add match for power7 thread safety insns, and new order of
std 2,40(1) insn. Correct code shown for _dl_runtime_resolve
invocation in comment, and update rest of comment.
(PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN,
PPC64_STANDARD_LINKAGE3_LEN): Delete.
(ppc64_standard_linkage2_target): Update insn offsets.
(ppc64_skip_trampoline_code): Use a single insn buffer. Match newer
stubs first. Update calls.
* Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
(HFILES_NO_SRCDIR): Add ppc64-tdep.h.
(ALLDEPFILES): Add ppc64-tdep.c.
* configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
ppc64-tdep.o to gdb_target_obs.
* ppc64-tdep.h: New file.
* ppc64-tdep.c: New file.
(insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
ppc-linux-tdep.c to here.
(PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
(PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
(ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
from ppc-linux-tdep.c to here.
(ppc64_convert_from_func_ptr_addr): Rename from
ppc64_linux_convert_from_func_ptr_addr to
ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
here.
* rs6000-tdep.c:
(read_insn): Move from ppc-linux-tdep.c to here.
(insns_match_pattern, insn_d_field, insn_ds_field): Move
from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
* ppc-linux-tdep.c: Include ppc64-tdep.h.
Removed above functions.
(ppc_linux_init_abi): Adjust.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Marcin Kościelnicki
Keith Seitz
Wei-cheng Wang
Pedro Alves
Joel Brobecker
Simon Marchi
Simon Marchi
Martin Galvan
Gary Benson
Tom Tromey
Edjunior Barbosa Machado
Andreas Arnez
Maciej W. Rozycki
Sanimir Agovic
Ulrich Weigand
Alan Modra
Luis Machado
Andreas Tobler
Joel Brobecker
Sergio Durigan Junior
Doug Evans
Jan Kratochvil