Commit graph

47 commits

Author SHA1 Message Date
Andrew Cagney
0f7d239c5a * frame.h (select_frame): Delete level parameter.
* stack.c (select_frame): Update.  Use frame_relative_level to
obtain the frame's level.
(select_and_print_frame): Update call.
(select_frame_command): Ditto.
(up_silently_base): Ditto.
(down_silently_base): Ditto.
* ocd.c (ocd_start_remote): Ditto.
* remote-rdp.c (remote_rdp_open): Ditto.
* remote-mips.c (mips_initialize): Ditto.
(common_open): Ditto.
* remote-e7000.c (e7000_start_remote): Ditto.
* m3-nat.c (select_thread): Ditto.
* hppa-tdep.c (child_get_current_exception_event): Ditto.
(child_get_current_exception_event): Ditto.
* varobj.c (varobj_create): Ditto.
(varobj_update): Ditto.
(c_value_of_root): Ditto.
* tracepoint.c (finish_tfind_command): Ditto.
* corelow.c (core_open): Ditto.
* arch-utils.c (generic_prepare_to_proceed): Ditto.
* thread.c (info_threads_command): Ditto.
(switch_to_thread): Ditto.
* infrun.c (normal_stop): Ditto.
(restore_selected_frame): Ditto.
(restore_inferior_status): Ditto.
* breakpoint.c (insert_breakpoints): Ditto.
(watchpoint_check): Ditto.
(bpstat_stop_status): Ditto.
(do_enable_breakpoint): Ditto.
* blockframe.c (flush_cached_frames): Ditto.
(reinit_frame_cache): Ditto.
2002-05-05 01:15:13 +00:00
Elena Zannoni
7aa83cacfa 2002-04-07 Elena Zannoni <ezannoni@redhat.com>
* remote-e7000.c (write_small, e7000_read_inferior_memory,
	e7000_read_inferior_memory_large, e7000_insert_breakpoint,
	e7000_remove_breakpoint): Use paddr_nz() to print addresses.
2002-04-07 23:32:40 +00:00
Andrew Cagney
0a65a603d3 Remove ATTRIBUTE_UNUSED. Update (C). 2002-01-19 03:32:43 +00:00
Andrew Cagney
2cd58942b9 * serial.h (SERIAL_ASYNC): Delete.
(DEPRECATED_SERIAL_FD): Delete.
(SERIAL_DEBUG): Delete.
(SERIAL_DEBUG_P): Delete.
(SERIAL_DRAIN_OUTPUT): Delete.
(SERIAL_FLUSH_OUTPUT): Delete.
(SERIAL_FLUSH_INPUT): Delete.
(SERIAL_SEND_BREAK): Delete.
(SERIAL_RAW): Delete.
(SERIAL_GET_TTY_STATE): Delete.
(SERIAL_SET_TTY_STATE): Delete.
(SERIAL_PRINT_TTY_STATE): Delete.
(SERIAL_NOFLUSH_SET_TTY_STATE): Delete.
(SERIAL_SETBAUDRATE): Delete.
(SERIAL_SETSTOPBITS): Delete.
(SERIAL_CAN_ASYNC_P): Delete.
(SERIAL_IS_ASYNC_P): Delete.
(SERIAL_UN_FDOPEN): Delete.
(SERIAL_READCHAR): Delete.
(SERIAL_CLOSE): Delete.
(SERIAL_FDOPEN): Delete.
(SERIAL_OPEN): Delete.
2001-07-15 20:34:14 +00:00
Elena Zannoni
4902674b93 2001-07-13 Elena Zannoni <ezannoni@redhat.com>
* remote-e7000.c (fetch_regs_from_dump): If register set is null,
	generate an internal error.
	(e7000_fetch_registers): Initialize variable 'wanted'.
	(e7000_wait): Initialize variable 'wanted_nopc'.
	(e7000_store_register): Fix sprintf compiler warnings.
	(sub2_from_pc): Ditto.
	(e7000_open): Close the descriptor, not the name.
	(e7000_load): Fix compiler warnings.
	(sub2_from_pc): Ditto.
	* Makefile.in (remote-e7000.o): Can now compile with -Werror.
2001-07-13 20:03:52 +00:00
Andrew Cagney
819cc32466 s/typedef serial_t/struct serial */ 2001-07-11 17:52:32 +00:00
Christopher Faylor
0b6a968ee6 * gnu-regex.c: Eliminate obsolete check for _MSC_VER.
* utils.c (notice_quit): Remove dummy function only used for _MSC_VER.
* values.c (unpack_double): Remove obsolete check for _MSC_VER.
* defs.h: Ditto.
* m32r-rom.c: Ditto.
* p-exp.y: Ditto.
* ser-e7kpc.c: Ditto.  Define WIN32_LEAN_AND_MEAN under _WIN32, for faster
compilation.
(get_ds_base): Remove _MSC_VER version of this function.
* nindy-share/ttyflush.c: Ditto.  X
* rdi-share/host.h: Ditto.  X
* ser-go32.c (dos_readchar): Remove call to obsolete function.
* remote-sim.c (gdb_os_poll_quit): Ditto.
* remote-e7000.c (expect): Remove obsolete #if 0'ed code.
* main.c (captured_main): Eliminate special Cygwin checks.
* ser-tcp.c: Remove unneeded __CYGWIN__ guard against system include.
2001-06-10 16:25:51 +00:00
Fernando Nasser
67dd5ca691 2001-05-12 Fernando Nasser <fnasser@redhat.com>
* remote-e7000.c (e7000_open): Check for bad baud rate.
	* remote-st.c (st2000_open): Ditto.
2001-05-12 21:05:59 +00:00
Kevin Buettner
39f770628a Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
J.T. Conklin
46c6cdcf5e * target.h (target_ops): Removed to_core_file_to_sym_file vector
function.
* corelow.c (core_ops): Updated for above change.
* gnu-nat.c (core_ops): Likewise.
* inftarg.c (child_ops): Likewise.
* monitor.c (monitor_ops): Likewise.
* ppc-bdm.c (bdm_ppc_ops): Likewise.
* remote-adapt.c (adapt_ops): Likewise.
* remote-bug.c (bug_ops): Likewise.
* remote-e7000.c (e7000_ops): Likewise.
* remote-eb.c (eb_ops): Likewise.
* remote-es.c (es1800_ops, es1800_child_ops): Likewise.
* remote-mm.c (mm_ops): Likewise.
* remote-nindy.c (nindy_ops): Likewise.
* remote-nrom.c (nrom_ops): Likewise.
* remote-os9k.c (rombug_ops): Likewise.
* remote-rdp.c (remote_rdp_ops): Likewise.
* remote-sim.c (gdbsim_ops): Likewise.
* remote-st.c (st2000_ops): Likewise.
* v850ice.c (v850ice_ops): Likewise.
* target.c (cleanup_target): Likewise
(update_current_target): Likewise.
(setup_target_debug): Likewise
(debug_to_core_file_to_sym_file): Removed.

* corefile.c (core_file_command) [HPUXHPPA]: Removed code that
sets symbol file from information obtained from the core file.
* corelow.c (core_file_to_sym_file): Removed.
2001-04-14 19:23:02 +00:00
Christopher Faylor
608506ed67 * main.c: Remove windows.h use.
(gdbtk_test): Use PATH_MAX for home var calculation.
* remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as Win32 in
test.
* ser-tcp.c: Use modern __CYGWIN__ conditional.
* source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test.
(openp): Ditto.
* symfile.c (symfile_bfd_open): Ditto.
* gdbtk/generic/gdbtk.c: Ditto.
2001-04-05 02:02:13 +00:00
Kevin Buettner
b6ba6518e9 Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
Andrew Cagney
4e052eda91 Create new file regcache.h. Update all uses. 2001-03-01 01:39:22 +00:00
Kevin Buettner
e1e9e218c1 Replace calls to abort() with calls to internal_error(). 2001-02-25 04:45:12 +00:00
J.T. Conklin
86ddecc5fc * ppc-bdm.c (#include <signal.h>): Removed.
* remote-array.c: Likewise.
* remote-bug.c: Likewise.
* remote-e7000.c: Likewise.
* remote-mips.c: Likewise.
* remote-os9k.c: Likewise.
* remote-st.c: Likewise.
* remote-udi.c: Likewise.
* remote-vx29k.c: Likewise.
* remote-vx68.c: Likewise.
* remote-vx960.c: Likewise.
* remote-vxmips.c: Likewise.
* remote-vxsparc.c: Likewise.
2001-02-02 23:04:14 +00:00
J.T. Conklin
824670030b * monitor.c (#include "gdb_wait.h"): Removed.
* ocd.c: Likewise.
* ppc-bdm.c: Likewise.
* remote-adapt.c: Likewise.
* remote-array.c: Likewise.
* remote-bug.c: Likewise.
* remote-e7000.c: Likewise.
* remote-eb.c: Likewise.
* remote-es.c: Likewise.
* remote-mips.c: Likewise.
* remote-mm.c: Likewise.
* remote-nindy.c: Likewise.
* remote-os9k.c: Likewise.
* remote-rdi.c: Likewise.
* remote-rdp.c: Likewise.
* remote-sds.c: Likewise.
* remote-sim.c: Likewise.
* remote-st.c: Likewise.
* remote-udi.c: Likewise.
* remote-vx.c: Likewise.
* remote-vx29k.c: Likewise.
* remote-vx68.c: Likewise.
* remote-vx960.c: Likewise.
* remote-vxmips.c: Likewise.
* remote-vxsparc.c: Likewise.
* remote.c: Likewise.
* ser-pipe.c: Likewise.
* ser-unix.c: Likewise.
* Makefile.in: Updated dependencies.
-------------------------------------------------------------------
2001-02-02 19:14:33 +00:00
J.T. Conklin
29e5738069 * exec.c (xfer_memory): Add attrib argument.
* infptrace.c (child_xfer_memory): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
* remote-adapt.c (adapt_xfer_inferior_memory): Likewise.
* remote-array.c (array_xfer_memory): Likewise.
* remote-bug.c (bug_xfer_memory): Likewise.
* remote-e7000.c (e7000_xfer_inferior_memory): Likewise.
* remote-eb.c (eb_xfer_inferior_memory): Likewise.
* remote-es.c (es1800_xfer_inferior_memory): Likewise.
* remote-mips.c (mips_xfer_memory): Likewise.
* remote-mm.c (mm_xfer_inferior_memory): Likewise.
* remote-nindy.c (nindy_xfer_inferior_memory): Likewise.
* remote-os9k.c (rombug_xfer_inferior_memory): Likewise.
* remote-rdi.c (arm_rdi_xfer_memory): Likewise.
* remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise.
* remote-sds.c (sds_xfer_memory): Likewise.
* remote-sim.c (gdbsim_xfer_inferior_memory): Likewise.
* remote-st.c (st2000_xfer_inferior_memory): Likewise.
* remote-udi.c (udi_xfer_inferior_memory): Likewise.
* remote-vx.c (vx_xfer_memory): Likewise.
* remote.c (remote_xfer_memory): Likewise.
* target.c (debug_to_xfer_memory, do_xfer_memory): Likewise.
* target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise.

* target.h (#include "memattr.h"): Added.
(target_ops.to_xfer_memory): Add attrib argument.

* wince.c (_initialize_inftarg): Removed call to set_dcache_state.
* dcache.h (set_dcache_state): Removed declaration.
* dcache.c (set_dcache_state): Removed definition

* dcache.c: Update module comment, as dcache is now enabled and
disabled with memory region attributes instead of by the global
variable "remotecache".  Add comment describing the interaction
between dcache and memory region attributes.
(dcache_xfer_memory): Add comment describing benefits of moving
cache writeback to a higher level.
(dcache_struct): Removed cache_has_stuff field.  This was used to
record whether the cache had been accessed in order to invalidate
it when it was disabled.  However, this is not needed because the
cache is write through and the code that enables, disables, and
deletes memory regions invalidate the cache.  Add comment which
suggests that we could be more selective and only invalidate those
cache lines containing data from those memory regions.
(dcache_invalidate): Updated.
(dcache_xfer_memory): Updated.

(dcache_alloc): Don't abort() if dcache_enabled_p is clear.
(dcache_xfer_memory): Removed code that called do_xfer_memory() to
perform a uncached transfer if dcache_enabled_p was clear.  This
function is now only called if caching is enabled for the memory
region.
(dcache_info): Always print cache info.

* target.c (do_xfer_memory): Add attrib argument.
(target_xfer_memory, target_xfer_memory_partial): Break transfer
into chunks defined by memory regions, pass region attributes to
do_xfer_memory().
* dcache.c (dcache_read_line, dcache_write_line): Likewise.

* Makefile.in (SFILES): Add memattr.c.
(COMMON_OBS): Add memattr.o.
(dcache.o): Add target.h to dependencies.
* memattr.c: New file.
* memattr.h: Likewise.
2001-01-23 22:48:56 +00:00
Andrew Cagney
55d8016036 * ser-e7kpc.c (e7000pc_setstopbits): New function.
(e7000pc_ops): Add e7000pc_setstopbits.

* remote-e7000.c (e7000_detach, e7000_resume,
e7000_xfer_inferior_memory, e7000_files_info, e7000_files_info,
e7000_insert_breakpoint, e7000_remove_breakpoint, e7000_kill):
Update function signature to match target vector.

* h8300-tdep.c (h8300_command, h8300h_command, h8300s_command):
h8500-tdep.c (small_command, big_command, medium_command,
compact_command): Update function signature to match add_cmd.
2000-12-02 11:37:15 +00:00
J.T. Conklin
8e1a459b89 * gdbarch.sh, hp-psymtab-read.c, hpread.c, m3-nat.c, mcore-tdep.c,
mips-tdep.c, monitor.c, regcache.c, remote-es.c, ser-unix.c,
somread.c, tracepoint.c: Fix spelling errors in comments.
* gdbarch.c: Regenerate.

* gnu-nat.c (S_exception_raise_request): Fix typos and spelling
errors in strings.
* m3-nat.c (intercept_exec_calls, mach_thread_parse_id): Likewise.
* mcore-tdep.c (mcore_analyze_prologue): Likewise.
* mips-tdep.c (mips16_next_pc, _initialize_mips_tdep): Likewise.
* remote-e7000.c (e7000_start_remote): Likewise.
* remote-rdp.c (handle_swi): Likewise.
* remote-vx.c (vx_load_command): Likewise.
* sh-tdep.c (sh_do_pseudo_register): Likewise.
* sol-thread.c (td_err_string): Likewise.
* symtab.c (decode_line_2): Likewise.
-------------------------------------------------------------------
2000-10-30 21:50:58 +00:00
Kevin Buettner
69dc947abb Protoization. 2000-10-03 22:42:32 +00:00
J.T. Conklin
8edbea78dc * dcache.c (dcache_info): Output a cache line's state vector so it
lines up under the data vector.

* dcache.c (dcache_read_line): New function.
(dcache_peek_byte): Use it.
(dcache_alloc): Return NULL if write of reclaimed cache line fails.
(dcache_peek_byte, dcache_poke_byte): Return failure if
dcache_alloc() returns a NULL data block pointer.
(dcache_xfer_memory): Don't force writeback unless we were writing.

* monitor.c (monitor_expect): Change places where immediate_quit
is set to 1 or 0 to increments and decrements respectively.  This
allows such changes to nest properly.
* ocd.c (ocd_start_remote): Likewise.
* remote-adapt.c (expect): Likewise.
* remote-array.c (expect): Likewise.
* remote-eb.c (expect): Likewise.
* remote-e7000.c (e7000_start_remote): Likewise.
* remote-mips.c (mips_expect_timeout, mips_getstring): Likewise.
* remote-nrom.c (expect): Likewise.
* remote-os9k.c (expect): Likewise.
* remote-sds.c (sds_start_remote): Likewise.
* remote-st.c (expect): Likewise.
* remote-utils.c (sr_expect): Likewise.
* remote.c (remote_start_remote): Likewise.
* tracepoint.c (read_actions): Likewise.

* remote-mips.c (mips_getstring): Balance changes to immediate_quit.
2000-09-01 00:12:10 +00:00
Elena Zannoni
34e9d9bbe1 2000-07-31 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* sh-tdep.c (sh_push_arguments): Make header match prototype.

	* remote-e7000.c (e7000_start_remote): Use void *, not char * as
 	parameter to avoid compiler warning.
	(fetch_regs_from_dump): Call get_hex() with the correct number of
 	parameters.
2000-07-31 16:25:36 +00:00
Kevin Buettner
fba45db2fa Protoization. 2000-07-30 01:48:28 +00:00
Elena Zannoni
cc17453a58 2000-07-19 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
Multiarch the sh target.
	* sh-tdep.c:
	(sh_generic_reg_names, sh_reg_names,sh3_reg_names, sh3e_reg_names,
 	sh_dsp_reg_names, sh3_dsp_reg_names, sh_processor_type_table):
 	Remove.
	(XMALLOC): Define.
	(struct frame_extra_info): Define.
	(sh_register_raw_size, sh_register_virtual_size,
 	sh_register_virtual_type, sh_register_byte, sh_breakpoint_from_pc,
 	sh_frame_saved_pc, sh_skip_prologue,
 	sh_nofp_frame_init_saved_regs, sh_fp_frame_init_saved_regs,
 	sh_extract_struct_value_address, sh_use_struct_convention,
 	sh_store_struct_return, sh_push_arguments, sh_push_return_address,
 	sh_saved_pc_after_call, sh_generic_register_name,
 	sh_sh_register_name, sh_sh3_register_name, sh_sh3e_register_name,
 	sh_sh_dsp_register_name, sh_sh3_dsp_register_name,
 	sh_frame_args_address, sh_frame_locals_address,
 	sh_coerce_float_to_double, sh_default_store_return_value,
 	sh3e_sh4_store_return_value, sh_generic_show_regs,
 	sh3_show_regs,sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs,
 	sh_dsp_show_regs, sh_register_byte, sh_register_raw_size,
 	sh_register_virtual_size, sh_sh3e_register_virtual_type,
 	sh_default_register_virtual_type, sh_gdbarch_init): New functions.
	(sh_target_architecture_hook, sh_frame_find_saved_regs,
 	sh_show_regs): Delete functions.
	(sh_frame_chain, sh_find_callers_reg, sh_init_extra_frame_info,
 	sh_pop_frame, sh_extract_return_value): Update

	* config/sh/tm-sh.h (GDB_MULTI_ARCH): Define to 1.
	(struct gdbarch_tdep): Define.
	Remove all unnecessary defines.

	* remote-e7000.c ({PR,GBR,SR,MACL,VBR,MACH}_REGNUM): Define to -1,
 	for h8300 case.
	(want_sh,want_nopc_sh,want_nopc_sh3): Make nomenclature
 	consistent.
	(e7000_fetch_registers): Remove ifdef GDB_TARGET_IS_SH, use
 	runtime check instead.
	(e7000_wait): Ditto.

	* sh3-rom.c (sh3_supply_register): Use gdbarch_tdep to get the SSR
 	and SPC register numbers.
	(sh3_regnames, sh3e_regnames): Don't specify a size.

	* config/h8300/tm-h8300.h: Add comment.
2000-07-19 14:11:42 +00:00
Kevin Buettner
a14ed312fd PARAMS removal. 2000-05-28 01:12:42 +00:00
Andrew Cagney
5c65bbb629 Cleanup bfd_close() cleanups. 2000-05-16 02:43:39 +00:00
Andrew Cagney
03f2053f96 Replace ../include/wait.h with gdb_wait.h. 2000-02-09 08:52:47 +00:00
Jason Molenda
c5aa993b1f import gdb-1999-07-07 post reformat 1999-07-07 20:19:36 +00:00
Stan Shebs
7a292a7adf import gdb-19990422 snapshot 1999-04-26 18:34:20 +00:00
Stan Shebs
c906108c21 Initial creation of sourceware repository 1999-04-16 01:35:26 +00:00
Stan Shebs
071ea11e85 Initial creation of sourceware repository 1999-04-16 01:34:07 +00:00
David Taylor
4ef1f46773 hp merge changes -- too numerous to mention here; see ChangeLog and
ChangeLog-gdbtk for details.
1998-12-28 23:06:13 +00:00
Andrew Cagney
aaa3c096db CARP:
Re-do TARGET_PRINT_INSN_INFO, TARGET_PRINT_INSN, TARGET_ARCHITECTURE,
TARGET_ARCHITECTURE_AUTO, TARGET_BYTE_ORDER_SELECTABLE_P,
TARGET_BYTE_ORDER so that they can all be overriden.

Document.

Convert mn10300 and PPC targets.
1998-12-13 23:28:46 +00:00
Andrew Cagney
d0aba53f38 New commands `set architecture'', show architecture'' and `info
architecture''.  Update SH target to use new target_architecture_hook.
1997-08-28 10:20:21 +00:00
Dawn Perchik
16a43bf443 * defs.h: Fix cntl-C to read from the Windows message queue.
Add prototypes for make_final_cleanup (and the other cleanup
	routines.
	* remote-e7000.c: Fix sync code to timeout if unable to sync.
	Change sync code to report status while trying to sync-up
	with hardware.  Add debugging output and document.
	* ser-e7kpc.c: Swap order of len & offset to match implementation.
	Add debugging output and document.
	* serial.c: Add debugging output.
	* top.c: Add call to do_final_cleanups.
	Remove conditionals preventing Win32 from getting SIGQUIT.
	* utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
	chain as a parameter.  Extract this generic code from the cleanup
	routines into separate funtions (*_my_cleanup).  Keep old
	functionality by passing "cleanup_chain" to the new funtions.
	Define the cleanup chain "final_cleanup_chain" to be a cleanup
	chain which will be executed only when gdb exits.  Add functions
	(*_final_cleanup) to match the original (*_cleanup) functions.
	(pollquit, quit, notice_quit): Fix to read cntl-C from the
	Windows message queue.
1997-02-12 10:27:11 +00:00
Fred Fish
b607efe714 See gdb ChangeLog entry with header:
Thu Jul 25 19:41:31 1996  Fred Fish  <fnf@cygnus.com>

for a rather huge set of changes.  I was going to put them here, but it
made cvs dump core.  :-(
1996-07-26 03:01:51 +00:00
Mark Alexander
97fd185a48 * remote-e7000.c (e7000_stop): New function.
PR 9935
1996-07-01 18:11:07 +00:00
Dawn Perchik
cb1709aeac * remote-e7000.c,remote.c,target.h,top.c:
Add set option "remote_timeout" for setting remote_timeout.
        Add set option "use_hard_breakpoints" for setting hardware
        .vs. memory breakpoints.
1996-06-28 12:27:08 +00:00
Dawn Perchik
56a4bf5339 * remote-e7000.c (e7000_parse_device): New function.
Add option "tcp_remote" to target command if using
        tcp to connect to a remote host which is then connected
        via serial port to the e7000 (for exampole, a port master).
        (e7000_open): Change to call e7000_parse_device.
1996-06-28 11:39:58 +00:00
Martin Hunt
ebea03669c * remote-e7000.c (e7000_read_inferior_memory_large): New function.
(e7000_xfer_inferior_memory): Call it.
PR 9754
1996-06-26 00:51:14 +00:00
Stan Shebs
72158e714e * symfile.c (report_transfer_performance): New function.
(generic_load): Call it to report transfer rate.
	* remote-e7000.c (e7000_load): Ditto.
PR 9353
1996-04-04 23:57:02 +00:00
Stu Grossman
b5eccf7482 * remote-e7000.c (e7000_load): New routine to download via the
network.
	* (e7000_wait):  Don't backup PC when we hit a breakpoint.
	Apparantly new sh2 pods get this right...
	* (e7000_ops):  Add call to e7000_load.
1996-02-24 06:39:44 +00:00
Stu Grossman
0fe1522ad0 * breakpoint.c (remove_breakpoint): Change error to warning so
that hardware watchpoint removal problems won't leave breakpoint
	traps in the target.
	* configure configure.in:  Make --enable-gdbtk be the default.
	* remote-e7000.c (e7000_insert_breakpoint,
	e7000_remove_breakpoint):  Use e7000 based breakpoints, not memory
	breakpoints.
	* (e7000_wait):  Adjust PC back by two when we see a breakpoint to
	compensate for e7000 maladjustment.
	* sparcl-tdep.c (sparclite_check_watch_resources):  Fix logic bug
	which prevented hardware watchpoints from working.
1996-01-05 00:42:36 +00:00
J.T. Conklin
2b57629364 * configure.in: Check for working mmap, ansi headers, string.h,
strings.h, and memory.h.
* configure: Regenerated.

* gdb_stat.h: New file, "portable" <sys/stat.h>.
* gdb_string.h: New file, "portable" <string.h>.

* altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c,
convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c,
gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c,
i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c,
mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c,
rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c,
symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c,
ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h"
instead of <sys/stat.h>.

* alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c,
ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c,
core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c,
dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c,
exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c,
fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c,
inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c,
m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c,
monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c,
printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c,
remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c,
remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c,
remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c,
remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c,
remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c,
solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c,
symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c,
valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include
"gdb_string.h" instead of <string.h>.
* gdbtk.c: Likewise.

* config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h,
sparc/xm-sun4os4.h (HAVE_MMAP): Removed.

* config/xm-lynx.h, config/i386/xm-ptx.h,
config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h,
config/mips/xm-irix3.h, config/mips/xm-mips.h,
config/mips/xm-news-mips.h, config/mips/xm-riscos.h,
config/pa/hppah.h, config/rs6000/xm-rs6000.h,
config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h,
config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h,
config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed.
* config/mips/xm-irix3.h, config/mips/xm-mips.h,
config/pa/xm-hppah.h (memcpy, memset): Removed declarations.
1995-08-01 20:14:27 +00:00
Steve Chamberlain
edd01519b9 Fri Feb 4 15:53:18 1994 Steve Chamberlain (sac@cygnus.com)
* h8500-tdep.c (saved_pc_after_call): The size of the
	pc is memory model dependent. (segmented_command,
	unsegmented_command, _initialize_h8500_tdep): New commands to
	change memory model.
	* remote-7000.c (initialize_remote_e7000): Change name of snoop
	command.
	* remote-hms.c (hms_load): Remove breakpoints when loaded.
	(hms_wait): Use new status structure
	(hms_open): Push the target here. (hms_before_main_loop): Not
	here.  (supply_val, hms_fetch_register, hms_store_register):  Cope
	with H8/500 names too.
	* sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
	all registers in a compact way.
1994-02-05 00:22:08 +00:00
Steve Chamberlain
863099f41e * remote-e7000.c: New file to cope with the Hitachi E7000 ICE.
* remote-utils.c, remote-utils.h (gr_load_image): New function to
	download to target.
	* h8300-tdep.c, h8500-tdep.c, remote-z8k.c, sh-tdep.c z8k-tdep.c
	(sim_load): delete.
	* remote-sim.c (sim_load): Use gr_load_image.
	* config/sh/sh.mt: Add remote-e7000
1993-11-15 23:26:56 +00:00
Steve Chamberlain
cdf73c5c3b Initial revision 1993-11-15 23:25:03 +00:00