downstream Fedora request:
Please make it easier to find the backtrace of the crashing thread
https://bugzilla.redhat.com/show_bug.cgi?id=1024504
Currently after loading a core file GDB prints:
Core was generated by `./threadcrash1'.
Program terminated with signal SIGSEGV, Segmentation fault.
8 *(volatile int *)0=0;
(gdb) _
there is nowhere seen which of the threads had crashed. In reality GDB always
numbers that thread as #1 and it is the current thread that time. But after
dumping all the info into a file for later analysis it is no longer obvious.
'thread apply all bt' even puts the thread #1 to the _end_ of the output!!!
Should GDB always print after loading a core file what "thread" command would
print?
[Current thread is 1 (Thread 0x7fcbe28fe700 (LWP 15453))]
BTW I think it will print the thread even when loading single/non-threaded
core file when other inferior(s) exist. But that currently crashes
[Bug threads/12074] multi-inferior internal error
https://sourceware.org/bugzilla/show_bug.cgi?id=12074
plus I think that would be a correct behavior anyway.
gdb/ChangeLog
2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* corelow.c (core_open): Call also thread_command.
* gdbthread.h (thread_command): New prototype moved from ...
* thread.c (thread_command): ... here.
(thread_command): Make it global.
gdb/ChangeLog:
* eval.c: Include gdbthread.h.
(evaluate_subexp): Enable thread stack temporaries before
evaluating a complete expression and clean them up after the
evaluation is complete.
* gdbthread.h: Include common/vec.h.
(value_ptr): New typedef.
(VEC (value_ptr)): New vector type.
(value_vec): New typedef.
(struct thread_info): Add new fields stack_temporaries_enabled
and stack_temporaries.
(enable_thread_stack_temporaries)
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries): Declare.
* gdbtypes.c (class_or_union_p): New function.
* gdbtypes.h (class_or_union_p): Declare.
* infcall.c (call_function_by_hand): Store return values of class
type as temporaries on stack.
* thread.c (enable_thread_stack_temporaries): New function.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary): Likewise.
(value_in_thread_stack_temporaries): Likewise.
* value.c (value_force_lval): New function.
* value.h (value_force_lval): Declare.
gdb/testsuite/ChangeLog:
* gdb.cp/chained-calls.cc: New file.
* gdb.cp/chained-calls.exp: New file.
* gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta".
TL;DR - if we step an instruction that is as long as
decr_pc_after_break (1-byte on x86) right after removing the
breakpoint at PC, in non-stop mode, adjust_pc_after_break adjusts the
PC, but it shouldn't.
In non-stop mode, when a breakpoint is removed, it is moved to the
"moribund locations" list. This is because other threads that are
running may have tripped on that breakpoint as well, and we haven't
heard about it. When a trap is reported, we check if perhaps it was
such a deleted breakpoint that caused the trap. If so, we also need
to adjust the PC (decr_pc_after_break).
Now, say that, on x86:
- a breakpoint was placed at an address where we have an instruction
of the same length as decr_pc_after_break on this arch (1 on x86).
- the breakpoint is removed, and thus put on the moribund locations
list.
- the thread is single-stepped.
As there's no breakpoint inserted at PC anymore, the single-step
actually executes the 1-byte instruction normally. GDB should _not_
adjust the PC for the resulting SIGTRAP. But, adjust_pc_after_break
confuses the step SIGTRAP reported for this single-step as being a
SIGTRAP for the moribund location of the breakpoint that used to be at
the previous PC, and so infrun applies the decr_pc_after_break
adjustment incorrectly.
The confusion comes from the special case mentioned in the comment:
static void
adjust_pc_after_break (struct execution_control_state *ecs)
{
...
As a special case, we could have hardware single-stepped a
software breakpoint. In this case (prev_pc == breakpoint_pc),
we also need to back up to the breakpoint address. */
if (thread_has_single_step_breakpoints_set (ecs->event_thread)
|| !ptid_equal (ecs->ptid, inferior_ptid)
|| !currently_stepping (ecs->event_thread)
|| (ecs->event_thread->stepped_breakpoint
&& ecs->event_thread->prev_pc == breakpoint_pc))
regcache_write_pc (regcache, breakpoint_pc);
The condition that incorrectly triggers is the
"ecs->event_thread->prev_pc == breakpoint_pc" one.
Afterwards, the next resume resume re-executes an instruction that had
already executed, which if you're lucky, results in the inferior
crashing. If you're unlucky, you'll get silent bad behavior...
The fix is to remember that we stepped a breakpoint. Turns out the
only case we step a breakpoint instruction today isn't covered by the
testsuite. It's the case of a 'handle nostop" signal arriving while a
step is in progress _and_ we have a software watchpoint, which forces
always single-stepping. This commit extends sigstep.exp to cover
that, and adds a new test for the adjust_pc_after_break issue.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-28 Pedro Alves <palves@redhat.com>
PR gdb/12623
* gdbthread.h (struct thread_info) <stepped_breakpoint>: New
field.
* infrun.c (resume) <stepping breakpoint instruction>: Set the
thread's stepped_breakpoint field. Skip if reverse debugging.
Add comment.
(init_thread_stepping_state, handle_signal_stop): Clear the
thread's stepped_breakpoint field.
gdb/testsuite/
2014-10-28 Pedro Alves <palves@redhat.com>
PR gdb/12623
* gdb.base/sigstep.c (no_handler): New global.
(main): If 'no_handler is true, set the signal handlers to
SIG_IGN.
* gdb.base/sigstep.exp (breakpoint_over_handler): Add
with_sw_watch and no_handler parameters. Handle them.
(top level) <stepping over handler when stopped at a breakpoint
test>: Add a test axis for testing with a software watchpoint, and
another for testing with the signal handler set to SIG_IGN.
* gdb.base/step-sw-breakpoint-adjust-pc.c: New file.
* gdb.base/step-sw-breakpoint-adjust-pc.exp: New file.
This commit avoids the prune_threads call in the remote target's
target_update_thread_list's implementation, eliminating all the "thread
alive" RSP traffic (one packet per thread) whenever we fetch the
thread list.
IOW, this:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
... more T packets; it's one per previously known live thread ...
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
Becomes:
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
Tested on x86_64 Fedora 20, native gdbserver:
- tests the qXfer:threads:read method.
Tested on x86_64 Fedora 20, native gdbserver with qXfer:threads:read
force-disabled in gdbserver:
- So that GDB falls back to the qfThreadInfo/qsThreadInfo method.
And also manually smoked tested force disabling both
qXfer:threads:read and qfThreadInfo/qsThreadInfo in gdbserver.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): New macro.
* remote.c (remote_update_thread_list): Skip calling prune_threads
if any thread listing method is supported, and instead walk over
the set of remote threads listed, deleting those that are not
found in GDB's thread list.
When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:
update_thread_list (void)
{
prune_threads ();
target_find_new_threads ();
update_threads_executing ();
}
And then prune_threads does:
prune_threads (void)
{
struct thread_info *tp, *next;
for (tp = thread_list; tp; tp = next)
{
next = tp->next;
if (!thread_alive (tp))
delete_thread (tp->ptid);
}
}
Calling thread_live on each thread one by one is expensive.
E.g., on Linux, it ends up doing kill(SIG0) once for each thread. Not
a big deal, but still a bunch of syscalls...
With the remote target, it's cumbersome. That thread_alive call ends
up generating one T packet per thread:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.
This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.
Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.
The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that. It's meant to be a no-op.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
(bsd_uthread_update_thread_list): ... this. Call prune_threads.
(bsd_uthread_target): Adjust.
* corelow.c (core_open): Adjust.
* dec-thread.c (dec_thread_find_new_threads): Update comment.
(dec_thread_update_thread_list): New function.
(init_dec_thread_ops): Adjust.
* gdbthread.h (prune_threads): New declaration.
* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
(thread_db_update_thread_list): ... this. Call prune_threads.
(init_thread_db_ops): Adjust.
* nto-procfs.c (procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
(procfs_attach, procfs_create_inferior, init_procfs_targets):
Adjust.
* obsd-nat.c (obsd_find_new_threads): Rename to ...
(obsd_update_thread_list): ... this. Call prune_threads.
(obsd_add_target): Adjust.
* procfs.c (procfs_target): Adjust.
(procfs_notice_thread): Update comment.
(procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
comment.
(ravenscar_wait): Adjust.
(ravenscar_find_new_threads): Rename to ...
(ravenscar_update_thread_list): ... this. Call prune_threads.
(init_ravenscar_thread_ops): Adjust.
* record-btrace.c (record_btrace_find_new_threads): Rename to ...
(record_btrace_update_thread_list): ... this. Adjust comment.
(init_record_btrace_ops): Adjust.
* remote.c (remote_threads_info): Rename to ...
(remote_update_thread_list): ... this. Call prune_threads.
(remote_start_remote, extended_remote_attach_1, init_remote_ops):
Adjust.
* sol-thread.c (check_for_thread_db): Adjust.
(sol_find_new_threads_callback): Rename to ...
(sol_update_thread_list_callback): ... this.
(sol_find_new_threads): Rename to ...
(sol_update_thread_list): ... this. Call prune_threads. Adjust.
(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
* target-delegates.c: Regenerate.
* target.c (target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* target.h (struct target_ops): Rename to_find_new_threads field
to to_update_thread_list.
(target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* thread.c (prune_threads): Make extern.
(update_thread_list): Adjust.
This patch finally makes each thread have its own set of single-step
breakpoints. This paves the way to have multiple threads software
single-stepping, though this patch doesn't flip that switch on yet.
That'll be done on a subsequent patch.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (single_step_breakpoints): Delete global.
(insert_single_step_breakpoint): Adjust to store the breakpoint
pointer in the current thread.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Delete functions.
(breakpoint_has_location_inserted_here): Make extern.
(single_step_breakpoint_inserted_here_p): Adjust to walk the
breakpoint list.
* breakpoint.h (breakpoint_has_location_inserted_here): New
declaration.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Remove declarations.
* gdbthread.h (struct thread_control_state)
<single_step_breakpoints>: New field.
(delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New declarations.
* infrun.c (follow_exec): Also clear the single-step breakpoints.
(singlestep_breakpoints_inserted_p, singlestep_ptid)
(singlestep_pc): Delete globals.
(infrun_thread_ptid_changed): Remove references to removed
globals.
(resume_cleanups): Delete the current thread's single-step
breakpoints.
(maybe_software_singlestep): Remove references to removed globals.
(resume): Adjust to use thread_has_single_step_breakpoints_set and
delete_single_step_breakpoints.
(init_wait_for_inferior): Remove references to removed globals.
(delete_thread_infrun_breakpoints): Delete the thread's
single-step breakpoints too.
(delete_just_stopped_threads_infrun_breakpoints): Don't delete
single-step breakpoints here.
(delete_stopped_threads_single_step_breakpoints): New function.
(adjust_pc_after_break): Adjust to use
thread_has_single_step_breakpoints_set.
(handle_inferior_event): Remove references to removed globals.
Use delete_stopped_threads_single_step_breakpoints.
(handle_signal_stop): Adjust to per-thread single-step
breakpoints. Swap test order to do cheaper tests first.
(switch_back_to_stepped_thread): Extend debug output. Remove
references to removed globals.
* record-full.c (record_full_wait_1): Adjust to per-thread
single-step breakpoints.
* thread.c (delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New functions.
(clear_thread_inferior_resources): Also delete the thread's
single-step breakpoints.
When GDB finds out the target triggered a watchpoint, and the target
has non-continuable watchpoints, GDB sets things up to step past the
instruction that triggered the watchpoint. This is just like stepping
past a breakpoint, but goes through a different mechanism - it resumes
only the thread that needs to step past the watchpoint, but also
switches a "infwait state" global, that has the effect that the next
target_wait only wait for events only from that thread.
This forcing of a ptid to pass to target_wait obviously becomes a
bottleneck if we ever support stepping past different watchpoints
simultaneously (in separate processes).
It's also unnecessary -- the target should only return events for
threads that have been resumed; if no other thread than the one we're
stepping past the watchpoint has been resumed, then those other
threads should not report events. If we couldn't assume that, then
stepping past regular breakpoints would be broken for not likewise
forcing a similar infwait_state.
So this patch eliminates infwait_state, and instead teaches keep_going
to mark step_over_info in a way that has the breakpoints module skip
inserting watchpoints (because we're stepping past one), like it skips
breakpoints when we're stepping past one.
Tested on:
- x86_64 Fedora 20 (continuable watchpoints)
- PPC64 Fedora 18 (non-steppable watchpoints)
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (should_be_inserted): Don't insert watchpoints if
trying to step past a non-steppable watchpoint.
* gdbthread.h (struct thread_info) <stepping_over_watchpoint>: New
field.
* infrun.c (struct step_over_info): Add new field
'nonsteppable_watchpoint_p' and adjust comments.
(set_step_over_info): New 'nonsteppable_watchpoint_p' parameter.
Adjust.
(clear_step_over_info): Clear nonsteppable_watchpoint_p as well.
(stepping_past_nonsteppable_watchpoint): New function.
(step_over_info_valid_p): Also return true if stepping past a
nonsteppable watchpoint.
(proceed): Adjust call to set_step_over_info. Remove reference to
init_infwait_state.
(init_wait_for_inferior): Remove reference to init_infwait_state.
(waiton_ptid): Delete global.
(struct execution_control_state)
<stepped_after_stopped_by_watchpoint>: Delete field.
(wait_for_inferior, fetch_inferior_event): Always pass
minus_one_ptid to target_wait.
(init_thread_stepping_state): Clear 'stepping_over_watchpoint'
field.
(init_infwait_state): Delete function.
(handle_inferior_event): Remove infwait_state handling.
(handle_signal_stop) <watchpoints handling>: Adjust after
stepped_after_stopped_by_watchpoint removal. Don't remove
breakpoints here nor set infwait_state. Set the thread's
stepping_over_watchpoint flag, and call keep_going instead.
(keep_going): Handle stepping_over_watchpoint. Adjust
set_step_over_info calls.
* infrun.h (stepping_past_nonsteppable_watchpoint): Declare
function.
Commit a25a5a45 (Fix "breakpoint always-inserted off"; remove
"breakpoint always-inserted auto") regressed non-stop remote
debugging.
This was exposed by mi-nsintrall.exp intermittently failing with a
spurious SIGTRAP.
The problem is that when debugging with "target remote", new threads
the target has spawned but have never reported a stop aren't visible
to GDB until it explicitly resyncs its thread list with the target's.
For example, in a program like this:
int
main (void)
{
pthread_t child_thread;
pthread_create (&child_thread, NULL, child_function, NULL);
return 0; <<<< set breakpoint here
}
If the user sets a breakpoint at the "return" statement, and runs the
program, when that breakpoint hit is reported, GDB is only aware of
the main thread. So if we base the decision to remove or insert
breakpoints from the target based on whether all the threads we know
about are stopped, we'll miss that child_thread is running, and thus
we'll remove breakpoints from the target, even through they should
still remain inserted, otherwise child_thread will miss them.
The break-while-running.exp test actually should also be exposing this
thread-list-out-of-synch problem. That test sets a breakpoint while
the main thread is stopped, but other threads are running. Because
other threads are running, the breakpoint is supposed to be inserted
immediately. But, unless something forces a refetch of the thread
list, like, e.g., "info threads", GDB won't be aware of the other
threads that had been spawned by the main thread, and so won't insert
new or old breakpoints in the target. And it turns out that the test
is exactly doing an explicit "info threads", masking out the
problem... This commit adjust the test to exercise the case of not
issuing "info threads". The test then fails without the GDB fix.
In the ni-nsintrall.exp case, what happens is that several threads hit
the same breakpoint, and when the first thread reports the stop,
because GDB wasn't aware other threads exist, all threads known to GDB
are found stopped, so GDB removes the breakpoints from the target.
The other threads follow up with SIGTRAPs too for that same
breakpoint, which has already been removed. For the first few
threads, the moribund breakpoints machinery suppresses the SIGTRAPs,
but after a few events (precisely '3 * thread_count () + 1' at the
time the breakpoint was removed, see update_global_location_list), the
moribund breakpoint machinery is no longer aware of the removed
breakpoint, and the SIGTRAP is reported as a spurious stop.
The fix is naturally then to stop assuming that if no thread in the
list is executing, then the target is fully stopped. We can't know
that until we fully sync the thread list. Because updating the thread
list on every stop would be too much RSP traffic, I chose instead to
update it whenever we're about to present a stop to the user.
Actually updating the thread list at that point happens to be an item
I had added to the local/remote parity wiki page a while ago:
Native GNU/Linux debugging adds new threads to the thread list as
the program creates them "The [New Thread foo] messages". Remote
debugging can't do that, and it's arguable whether we shouldn't even
stop native debugging from doing that, as it hinders inferior
performance. However, a related issue is that with remote targets
(and gdbserver), even after the program stops, the user still needs
to do "info threads" to pull an updated thread list. This, should
most likely be addressed, so that GDB pulls the list itself, perhaps
just before presenting a stop to the user.
With that in place, the need to delay "Program received signal FOO"
was actually caught by the manythreads.exp test. Without that bit, I
was getting:
[Thread 0x7ffff7f13700 (LWP 4499) exited]
[New Thread 0x7ffff7f0b700 (LWP 4500)]
^C
Program received signal SIGINT, Interrupt.
[New Thread 0x7ffff7f03700 (LWP 4501)] <<< new output
[Switching to Thread 0x7ffff7f0b700 (LWP 4500)]
__GI___nptl_death_event () at events.c:31
31 {
(gdb) FAIL: gdb.threads/manythreads.exp: stop threads 1
That is, I was now getting "New Thread" lines after the "Program
received signal" line, and the test doesn't expect them. As the
number of new threads discovered before and after the "Program
received signal" output is unbounded, it's much nicer to defer
"Program received signal" until after synching the thread list, thus
close to the "switching to thread" output and "current frame/source"
info:
[Thread 0x7ffff7863700 (LWP 7647) exited]
^C[New Thread 0x7ffff786b700 (LWP 7648)]
Program received signal SIGINT, Interrupt.
[Switching to Thread 0x7ffff7fc4740 (LWP 6243)]
__GI___nptl_create_event () at events.c:25
25 {
(gdb) PASS: gdb.threads/manythreads.exp: stop threads 1
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-02 Pedro Alves <palves@redhat.com>
* breakpoint.c (breakpoints_should_be_inserted_now): Use
threads_are_executing.
* breakpoint.h (breakpoints_should_be_inserted_now): Add
describing comment.
* gdbthread.h (threads_are_executing): Declare.
(handle_signal_stop) <random signals>: Don't print about the
signal here if stopping.
(end_stepping_range): Don't notify observers here.
(normal_stop): Update the thread list. If stopped by a random
signal or a stepping range ended, notify observers.
* thread.c (threads_executing): New global.
(init_thread_list): Clear 'threads_executing'.
(set_executing): Set or clear 'threads_executing'.
(threads_are_executing): New function.
(update_threads_executing): New function.
(update_thread_list): Use it.
gdb/testsuite/
2014-10-02 Pedro Alves <palves@redhat.com>
* gdb.threads/break-while-running.exp (test): Add new
'update_thread_list' argument. Skip "info threads" if false.
(top level): Add new 'update_thread_list' axis.
A patch I wrote made GDB pull the thread list sooner when debugging
with target remote, and I noticed an intended consequence. GDB
started bouncing around the currently selected remote/general thread
more frequently. E.g.:
Sending packet: $qTMinFTPILen#3b...Packet received: 5
+Sending packet: $Hgp726d.726d#53...Packet received: OK
Sending packet: $m400680,40#2f...Packet received: 85c0741455bff00d60004889e5ffd05de97bffffff0f1f00e973ffffff0f1f00554889e5c745fc00000000c745fc01000000e900000000c745fc02000000b800
+Sending packet: $Hgp726d.7278#28...Packet received: OK
Sending packet: $m4006b2,1#28...Packet received: e9
Fast tracepoint 2 at 0x4006b2: file gdb/testsuite/gdb.trace/range-stepping.c, line 53.
Sending packet: $qTStatus#49...Packet received: T0;tnotrun:0;tframes:0;tcreated:0;tfree:500000;tsize:500000;circular:0;disconn:0;starttime:0;stoptime:0;username:;notes::
This ended up breaking "tstart" when one has fast tracepoints set,
because gdbserver isn't expecting an Hg packet in response to
qRelocInsn:
(gdb) ftrace *set_point
Fast tracepoint 3 at 0x4006b2: file gdb/testsuite/gdb.trace/range-stepping.c, line 53.
(gdb) PASS: gdb.trace/range-stepping.exp: ftrace: ftrace *set_point
tstart
gdbserver: Malformed response to qRelocInsn, ignoring: Hgp2783.2783
Target does not support this command.
(gdb) FAIL: gdb.trace/range-stepping.exp: ftrace: tstart
remote_trace_start should probably start by making sure the remote
current thread matches inferior_ptid (calling set_general_thread), but
still, reducing unnecessary bouncing is a good idea. It happens
because the memory/symbol/breakpoint routines use
switch_to_program_space_and_thread to do something in the right
context and then revert back to the previously current thread.
The fix is to simply make any_thread_of_process,
find_inferior_for_program_space, etc. give preference to the current
thread/inferior it if matches.
gdb/
2014-10-02 Pedro Alves <palves@redhat.com>
* gdbthread.h (any_thread_of_process, any_live_thread_of_process):
Adjust comments.
* inferior.c (find_inferior_for_program_space): Give preference to
the current inferior.
* inferior.h (find_inferior_for_program_space): Update comment.
* progspace.c (switch_to_program_space_and_thread): Prefer the
current inferior if it's bound to the program space requested. If
the inferior found doesn't have a PID yet, don't bother looking up
a thread.
* progspace.h (switch_to_program_space_and_thread): Adjust
comment.
* thread.c (any_thread_of_process, any_live_thread_of_process):
Give preference to the current thread.
Currently, GDB can pass a signal to the wrong thread in several
different but related scenarios.
E.g., if thread 1 stops for signal SIGFOO, the user switches to thread
2, and then issues "continue", SIGFOO is actually delivered to thread
2, not thread 1. This obviously messes up programs that use
pthread_kill to send signals to specific threads.
This has been a known issue for a long while. Back in 2008 when I
made stop_signal be per-thread (2020b7ab), I kept the behavior -- see
code in 'proceed' being removed -- wanting to come back to it later.
The time has finally come now.
The patch fixes this -- on resumption, intercepted signals are always
delivered to the thread that had intercepted them.
Another example: if thread 1 stops for a breakpoint, the user switches
to thread 2, and then issues "signal SIGFOO", SIGFOO is actually
delivered to thread 1, not thread 2, because 'proceed' first switches
to thread 1 to step over its breakpoint... If the user deletes the
breakpoint before issuing "signal FOO", then the signal is delivered
to thread 2 (the current thread).
"signal SIGFOO" can be used for two things: inject a signal in the
program while the program/thread had stopped for none, bypassing
"handle nopass"; or changing/suppressing a signal the program had
stopped for. These scenarios are really two faces of the same coin,
and GDB can't really guess what the user is trying to do. GDB might
have intercepted signals in more than one thread even (see the new
signal-command-multiple-signals-pending.exp test). At least in the
inject case, it's obviously clear to me that the user means to deliver
the signal to the currently selected thread, so best is to make the
command's behavior consistent and easy to explain.
Then, if the user is trying to suppress/change a signal the program
had stopped for instead of injecting a new signal, but, the user had
changed threads meanwhile, then she will be surprised that with:
(gdb) continue
Thread 1 stopped for signal SIGFOO.
(gdb) thread 2
(gdb) signal SIGBAR
... GDB actually delivers SIGFOO to thread 1, and SIGBAR to thread 2
(with scheduler-locking off, which is the default, because then
"signal" or any other resumption command resumes all threads).
So the patch makes GDB detect that, and ask for confirmation:
(gdb) thread 1
[Switching to thread 1 (Thread 10979)]
(gdb) signal SIGUSR2
Note:
Thread 3 previously stopped with signal SIGUSR2, User defined signal 2.
Thread 2 previously stopped with signal SIGUSR1, User defined signal 1.
Continuing thread 1 (the current thread) with specified signal will
still deliver the signals noted above to their respective threads.
Continue anyway? (y or n)
All these scenarios are covered by the new tests.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-07-25 Pedro Alves <palves@redhat.com>
* NEWS: Mention signal passing and "signal" command changes.
* gdbthread.h (struct thread_suspend_state) <stop_signal>: Extend
comment.
* breakpoint.c (until_break_command): Adjust clear_proceed_status
call.
* infcall.c (run_inferior_call): Adjust clear_proceed_status call.
* infcmd.c (proceed_thread_callback, continue_1, step_once)
(jump_command): Adjust clear_proceed_status call.
(signal_command): Warn if other thread that are resumed have
signals that will be delivered. Adjust clear_proceed_status call.
(until_next_command, finish_command)
(proceed_after_attach_callback, attach_command_post_wait)
(attach_command): Adjust clear_proceed_status call.
* infrun.c (proceed_after_vfork_done): Likewise.
(proceed_after_attach_callback): Adjust comment.
(clear_proceed_status_thread): Clear stop_signal if not in pass
state.
(clear_proceed_status_callback): Delete.
(clear_proceed_status): New 'step' parameter. Only clear the
proceed status of threads the command being prepared is about to
resume.
(proceed): If passed in an explicit signal, override stop_signal
with it. Don't pass the last stop signal to the thread we're
resuming.
(init_wait_for_inferior): Adjust clear_proceed_status call.
(switch_back_to_stepped_thread): Clear the signal if it should not
be passed.
* infrun.h (clear_proceed_status): New 'step' parameter.
(user_visible_resume_ptid): Add comment.
* linux-nat.c (linux_nat_resume_callback): Don't check whether the
signal is in pass state.
* remote.c (append_pending_thread_resumptions): Likewise.
* mi/mi-main.c (proceed_thread): Adjust clear_proceed_status call.
gdb/doc/
2014-07-25 Pedro Alves <palves@redhat.com>
Eli Zaretskii <eliz@gnu.org>
* gdb.texinfo (Signaling) <signal command>: Explain what happens
with multi-threaded programs.
gdb/testsuite/
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-command-handle-nopass.c: New file.
* gdb.threads/signal-command-handle-nopass.exp: New file.
* gdb.threads/signal-command-multiple-signals-pending.c: New file.
* gdb.threads/signal-command-multiple-signals-pending.exp: New file.
* gdb.threads/signal-delivered-right-thread.c: New file.
* gdb.threads/signal-delivered-right-thread.exp: New file.
Function any_running isn't used. This patch is to remove it.
Rebuild GDB for linux and mingw.
gdb:
2014-06-19 Yao Qi <yao@codesourcery.com>
* gdbthread.h (any_running): Remove the declaration.
* thread.c (any_running): Remove.
This patch is to change field state's type to 'enum thread_state', and
replace RUNNING with THREAD_RUNNING and STOPPED with THREAD_STOPPED
respectively in comments.
gdb:
2014-06-19 Yao Qi <yao@codesourcery.com>
* gdbthread.h (struct thread_info) <state>: Change its type to
'enum thread_state'. Update comments.
Running gdb.threads/thread-execl.exp with scheduler-locking set to
"step" reveals a problem:
(gdb) next^M
[Thread 0x7ffff7fda700 (LWP 27168) exited]^M
[New LWP 27168]^M
[Thread 0x7ffff74ee700 (LWP 27174) exited]^M
process 27168 is executing new program: /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.threads/thread-execl^M
[Thread debugging using libthread_db enabled]^M
Using host libthread_db library "/lib64/libthread_db.so.1".^M
infrun.c:5225: internal-error: switch_back_to_stepped_thread: Assertion `!schedlock_applies (1)' failed.^M
A problem internal to GDB has been detected,^M
further debugging may prove unreliable.^M
Quit this debugging session? (y or n) FAIL: gdb.threads/thread-execl.exp: schedlock step: get to main in new image (GDB internal error)
The assertion is correct. The issue is that GDB is mistakenly trying
to switch back to an exited thread, that was previously stepping when
it exited. This is exactly the sort of thing the test wants to make
sure doesn't happen:
# Now set a breakpoint at `main', and step over the execl call. The
# breakpoint at main should be reached. GDB should not try to revert
# back to the old thread from the old image and resume stepping it
We don't see this bug with schedlock off only because a different
sequence of events makes GDB manage to delete the thread instead of
marking it exited.
This particular internal error can be fixed by making the loop over
all threads in switch_back_to_stepped_thread skip exited threads.
But, looking over other ALL_THREADS users, all either can or should be
skipping exited threads too. So for simplicity, this patch replaces
ALL_THREADS with a new macro that skips exited threads itself, and
updates everything to use it.
Tested on x86_64 Fedora 20.
gdb/
2014-06-19 Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_THREADS): Delete.
(ALL_NON_EXITED_THREADS): New macro.
* btrace.c (btrace_free_objfile): Use ALL_NON_EXITED_THREADS
instead of ALL_THREADS.
* infrun.c (find_thread_needs_step_over)
(switch_back_to_stepped_thread): Use ALL_NON_EXITED_THREADS
instead of ALL_THREADS.
* record-btrace.c (record_btrace_open)
(record_btrace_stop_recording, record_btrace_close)
(record_btrace_is_replaying, record_btrace_resume)
(record_btrace_find_thread_to_move, record_btrace_wait): Likewise.
* remote.c (append_pending_thread_resumptions): Likewise.
* thread.c (thread_apply_all_command): Likewise.
gdb/testsuite/
2014-06-19 Pedro Alves <palves@redhat.com>
* gdb.threads/thread-execl.exp (do_test): New procedure, factored
out from ...
(top level): ... here. Iterate running tests under different
scheduler-locking settings.
The other part of PR gdb/13860 is about console execution commands in
MI getting their output half lost. E.g., take the finish command,
executed on a frontend's GDB console:
sync:
finish
&"finish\n"
~"Run till exit from #0 usleep (useconds=10) at ../sysdeps/unix/sysv/linux/usleep.c:27\n"
^running
*running,thread-id="1"
(gdb)
~"0x00000000004004d7 in foo () at stepinf.c:6\n"
~"6\t usleep (10);\n"
~"Value returned is $1 = 0\n"
*stopped,reason="function-finished",frame={addr="0x00000000004004d7",func="foo",args=[],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="6"},thread-id="1",stopped-threads="all",core="1"
async:
finish
&"finish\n"
~"Run till exit from #0 usleep (useconds=10) at ../sysdeps/unix/sysv/linux/usleep.c:27\n"
^running
*running,thread-id="1"
(gdb)
*stopped,reason="function-finished",frame={addr="0x00000000004004d7",func="foo",args=[],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="6"},gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0"
Note how all the "Value returned" etc. output is missing in async mode.
The same happens with e.g., catchpoints:
=breakpoint-modified,bkpt={number="1",type="catchpoint",disp="keep",enabled="y",what="22016",times="1"}
~"\nCatchpoint "
~"1 (forked process 22016), 0x0000003791cbd8a6 in __libc_fork () at ../nptl/sysdeps/unix/sysv/linux/fork.c:131\n"
~"131\t pid = ARCH_FORK ();\n"
*stopped,reason="fork",disp="keep",bkptno="1",newpid="22016",frame={addr="0x0000003791cbd8a6",func="__libc_fork",args=[],file="../nptl/sysdeps/unix/sysv/linux/fork.c",fullname="/usr/src/debug/glibc-2.14-394-g8f3b1ff/nptl/sysdeps/unix/sysv/linux/fork.c",line="131"},thread-id="1",stopped-threads="all",core="0"
where all those ~ lines are missing in async mode, or just the "step"
current line indication:
s
&"s\n"
^running
*running,thread-id="all"
(gdb)
~"13\t foo ();\n"
*stopped,frame={addr="0x00000000004004ef",func="main",args=[{name="argc",value="1"},{name="argv",value="0x7fffffffdd78"}],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="13"},thread-id="1",stopped-threads="all",core="3"
(gdb)
Or in the case of the PRs example, the "Stopped due to shared library
event" note:
start
&"start\n"
~"Temporary breakpoint 1 at 0x400608: file ../../../src/gdb/testsuite/gdb.mi/solib-main.c, line 21.\n"
=breakpoint-created,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x0000000000400608",func="main",file="../../../src/gdb/testsuite/gdb.mi/solib-main.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/solib-main.c",line="21",times="0",original-location="main"}
~"Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/solib-main \n"
=thread-group-started,id="i1",pid="21990"
=thread-created,id="1",group-id="i1"
^running
*running,thread-id="all"
(gdb)
=library-loaded,id="/lib64/ld-linux-x86-64.so.2",target-name="/lib64/ld-linux-x86-64.so.2",host-name="/lib64/ld-linux-x86-64.so.2",symbols-loaded="0",thread-group="i1"
~"Stopped due to shared library event (no libraries added or removed)\n"
*stopped,reason="solib-event",thread-id="1",stopped-threads="all",core="3"
(gdb)
IMO, if you're typing execution commands in a frontend's console, you
expect to see their output. Indeed it's what you get in sync mode. I
think async mode should do the same. Deciding what to mirror to the
console wrt to breakpoints and random stops gets messy real fast.
E.g., say "s" trips on a breakpoint. We'd clearly want to mirror the
event to the console in this case. But what about more complicated
cases like "s&; thread n; s&", and one of those steps spawning a new
thread, and that thread hitting a breakpoint? It's impossible in
general to track whether the thread had any relation to the commands
that had been executed. So I think we should just simplify and always
mirror breakpoints and random events to the console.
Notes:
- mi->out is the same as gdb_stdout when MI is the current
interpreter. I think that referring to that directly is cleaner.
An earlier revision of this patch made the changes that are now
done in mi_on_normal_stop directly in infrun.c:normal_stop, and so
not having an obvious place to put the new uiout by then, and not
wanting to abuse CLI's uiout, I made a temporary uiout when
necessary.
- Hopefuly the rest of the patch is more or less obvious given the
comments added.
Tested on x86_64 Fedora 20, no regressions.
2014-05-21 Pedro Alves <palves@redhat.com>
PR gdb/13860
* gdbthread.h (struct thread_control_state): New field
`command_interp'.
* infrun.c (follow_fork): Copy the new thread control field to the
child fork thread.
(clear_proceed_status_thread): Clear the new thread control field.
(proceed): Set the new thread control field.
* interps.h (command_interp): Declare.
* interps.c (command_interpreter): New global.
(command_interp): New function.
(interp_exec): Set `command_interpreter' while here.
* cli-out.c (cli_uiout_dtor): New function.
(cli_ui_out_impl): Install it.
* mi/mi-interp.c: Include cli-out.h.
(mi_cmd_interpreter_exec): Add comment.
(restore_current_uiout_cleanup): New function.
(ui_out_free_cleanup): New function.
(mi_on_normal_stop): If finishing an execution command started by
a CLI command, or any kind of breakpoint-like event triggered,
print the stop event to the output (CLI) stream.
* mi/mi-out.c (mi_ui_out_impl): Install NULL `dtor' handler.
2014-05-21 Pedro Alves <palves@redhat.com>
PR gdb/13860
* gdb.mi/mi-cli.exp (line_callee4_next_step): New global.
(top level): Test that output related to execution commands is
sent to the console with CLI commands, but not with MI commands.
Test that breakpoint events are always mirrored to the console.
Also expect the new source line to be output after a "next" in
async mode too. Make it a pass/fail test.
* gdb.mi/mi-solib.exp: Test that the CLI solib event note is
output.
* lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.
This patch teaches GDB to take advantage of target-assisted range
stepping. It adds a new 'r ADDR1,ADDR2' action to vCont (vCont;r),
meaning, "step once, and keep stepping as long as the thread is in the
[ADDR1,ADDR2) range".
Rationale:
When user issues the "step" command on the following line of source,
a = b + c + d * e - a;
GDB single-steps every single instruction until the program reaches a
new different line. E.g., on x86_64, that line compiles to:
0x08048434 <+65>: mov 0x1c(%esp),%eax
0x08048438 <+69>: mov 0x30(%esp),%edx
0x0804843c <+73>: add %eax,%edx
0x0804843e <+75>: mov 0x18(%esp),%eax
0x08048442 <+79>: imul 0x2c(%esp),%eax
0x08048447 <+84>: add %edx,%eax
0x08048449 <+86>: sub 0x34(%esp),%eax
0x0804844d <+90>: mov %eax,0x34(%esp)
0x08048451 <+94>: mov 0x1c(%esp),%eax
and the following is the RSP traffic between GDB and GDBserver:
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:3c840408;thread:p2e13.2e13;core:1;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:3e840408;thread:p2e13.2e13;core:2;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:42840408;thread:p2e13.2e13;core:2;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:47840408;thread:p2e13.2e13;core:0;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:49840408;thread:p2e13.2e13;core:0;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:4d840408;thread:p2e13.2e13;core:0;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2e13.2e13;core:0;
IOW, a lot of roundtrips between GDB and GDBserver.
If we add a new command to the RSP, meaning "keep stepping and don't
report a stop until the program goes out of the [0x08048434,
0x08048451) address range", then the RSP traffic can be reduced down
to:
--> vCont;r8048434,8048451:p2db0.2db0;c
<-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2db0.2db0;core:1;
As number of packets is reduced dramatically, the performance of
stepping source lines is much improved.
In case something is wrong with range stepping on the stub side, the
debug info or even gdb, this adds a "set/show range-stepping" command
to be able to turn range stepping off.
gdb/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_control_state) <may_range_step>: New
field.
* infcmd.c (step_once, until_next_command): Enable range stepping.
* infrun.c (displaced_step_prepare): Disable range stepping.
(resume): Disable range stepping if stepping over a breakpoint or
we have software watchpoints. If range stepping is enabled,
assert the thread is in the stepping range.
(clear_proceed_status_thread): Clear may_range_step.
(handle_inferior_event): Disable range stepping as soon as we know
the thread that hit the event. Re-enable it whenever we're going
to step with a step range.
* remote.c (struct vCont_action_support) <r>: New field.
(use_range_stepping): New global.
(remote_vcont_probe): Handle 'r' action.
(append_resumption): Append an 'r' action if the thread may range
step.
(show_range_stepping): New function.
(set_range_stepping): New function.
(_initialize_remote): Call add_setshow_boolean_cmd to register the
'set range-stepping' and 'show range-stepping' commands.
* NEWS: Mention range stepping, the new vCont;r action, and the
new "set/show range-stepping" commands.
gdb/doc/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.texinfo (Packets): Document 'vCont;r'.
(Continuing and Stepping): Document target-assisted range
stepping, and the 'set range-stepping' and 'show range-stepping'
commands.
This adds a function for doing within-thread's-stepping-range checks,
and converts a couple spots to use it. Following patches will add
more uses.
gdb/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdbthread.h (pc_in_thread_step_range): New declaration.
* thread.c (pc_in_thread_step_range): New function.
* infrun.c (handle_inferior_event): Use it.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_THREADS): New macro.
(thread_list): Declare.
* infrun.c (handle_inferior_event) <spurious signal>: Don't keep
going, but instead fall through to the stepping handling.
* linux-nat.c (resume_lwp): New parameter 'signo'. Resume with
the passed in signal. Adjust debug output.
(resume_callback): Rename to ...
(linux_nat_resume_callback): ... this. Pass the thread's last
stop signal, if in "pass" state.
(linux_nat_resume): Adjust to rename.
(stop_wait_callback): New assertion. Don't respawn signals;
instead let the LWP remain with SIGNALLED set.
(linux_nat_wait_1): Remove flushing of pending SIGSTOPs.
* remote.c (append_pending_thread_resumptions): New.
(remote_vcont_resume): Call it.
* target.h (target_resume): Extend comment.
gdb/testsuite/
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.threads/siginfo-threads.exp: New file.
* gdb.threads/siginfo-threads.c: New file.
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.
Remove stale dummy frames.
* breakpoint.c: Include dummy-frame.h.
(longjmp_breakpoint_ops): New variable.
(update_breakpoints_after_exec, breakpoint_init_inferior): Delete also
bp_longjmp_call_dummy.
(bpstat_what, bptype_string, print_one_breakpoint_location)
(init_bp_location): Support bp_longjmp_call_dummy.
(set_longjmp_breakpoint): Use longjmp_breakpoint_ops. Comment why.
(set_longjmp_breakpoint_for_call_dummy)
(check_longjmp_breakpoint_for_call_dummy, longjmp_bkpt_dtor): New
functions.
(initialize_breakpoint_ops): Initialize longjmp_breakpoint_ops.
* breakpoint.h (enum bptype): New item bp_longjmp_call_dummy. Delete
FIXME comment and extend the other comment for bp_call_dummy.
(set_longjmp_breakpoint_for_call_dummy)
(check_longjmp_breakpoint_for_call_dummy): New declarations.
* dummy-frame.c: Include gdbthread.h.
(pop_dummy_frame_bpt): New function.
(pop_dummy_frame): Call pop_dummy_frame_bpt.
(dummy_frame_discard): New function.
(cleanup_dummy_frames): Update the comment about longjmps.
* dummy-frame.h (dummy_frame_discard): New declaration.
* gdbthread.h (struct thread_info): Extend initiating_frame comment.
* infcall.c (call_function_by_hand): New variable longjmp_b. Call
set_longjmp_breakpoint_for_call_dummy. Chain its breakpoints with BPT.
* infrun.c (handle_inferior_event) <BPSTAT_WHAT_CLEAR_LONGJMP_RESUME>:
Add case 4 comment. Call check_longjmp_breakpoint_for_call_dummy and
keep_going if IS_LONGJMP and there is no other reason to stop.
gdb/testsuite/
Remove stale dummy frames.
* gdb.base/call-signal-resume.exp (maintenance print dummy-frames)
(maintenance info breakpoints): New tests.
* gdb.base/stale-infcall.c: New file.
* gdb.base/stale-infcall.exp: New file.
* thread.c (any_live_thread_of_process): Prioritize threads
that are not executing.
* gdbthread.h (any_live_thread_of_process): Update comment
as per above change.
* gdbthread.h (print_thread_info): Change prototype.
* thread.c (print_thread_info): Accept char* instead of int for
requested_threads argument. Use new function number_is_in_list
to determine which threads to list.
(info_threads_command): Pass char* to print_thread_info.
* cli/cli-utils.c (number_is_in_list): New function.
* cli/cli-utils.h (number_is_in_list): Export.
* mi/mi-main.c (mi_cmd_thread_info): Pass char* to
print_thread_info.
(print_one_inferior): Ditto.
(mi_cmd_list_thread_groups): Ditto.
2011-02-21 Michael Snyder <msnyder@vmware.com>
* gdb.threads/thread-find.exp: Update patterns for changes in
output of "info threads" command.
Fix step_resume_breakpoint unsaved during an infcall.
* gdbthread.h (struct thread_control_state): Move here field
step_resume_breakpoint ...
(struct thread_info): ... from here.
* infrun.c (save_infcall_control_state): Reset
control.step_resume_breakpoint to NULL.
(restore_infcall_control_state, discard_infcall_control_state): Delete
control.step_resume_breakpoint.
* arm-linux-tdep.c, infrun.c, thread.c: Update all the references to
the moved field.
gdb/testsuite/
Fix step_resume_breakpoint unsaved during an infcall.
* gdb.base/step-resume-infcall.exp: New file.
* gdb.base/step-resume-infcall.c: New file.
Rename and move inferior_thread_state and inferior_status.
* gdbthread.h (struct thread_control_state): New struct, move fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step and stop_bpstat here from struct thread_info.
(struct thread_suspend_state): New struct, move field stop_signal here
from struct thread_info.
(struct thread_info): Move the fields above from this struct.
* inferior.h: Move the inferior_thread_state and inferior_status
declarations comment to their definitions at infrun.c.
(struct inferior_control_state): New struct, move field stop_soon from
struct inferior here.
(struct inferior_suspend_state): New empty struct.
(struct inferior): New fields control and suspend. Move out field
stop_soon.
* infrun.c (struct inferior_thread_state): Rename to ...
(infcall_suspend_state): ... here. Replace field stop_signal by
fields thread_suspend and inferior_suspend.
(save_inferior_thread_state): Rename to ...
(save_infcall_suspend_state): ... here. New variable inf. Update the
code for new fields.
(restore_inferior_thread_state): Rename to ...
(restore_infcall_suspend_state): ... here. New variable inf. Update
the code for new fields.
(do_restore_inferior_thread_state_cleanup): Rename to ...
(do_restore_infcall_suspend_state_cleanup): ... here.
(make_cleanup_restore_inferior_thread_state): Rename to ...
(make_cleanup_restore_infcall_suspend_state): ... here.
(discard_inferior_thread_state): Rename to ...
(discard_infcall_suspend_state): ... here.
(get_inferior_thread_state_regcache): Rename to ...
(get_infcall_suspend_state_regcache): ... here.
(struct inferior_status): Rename to ...
(struct infcall_control_state): ... here. Replace fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step, stop_bpstat and stop_soon by fields thread_control and
inferior_control.
(save_inferior_status): Rename to ...
(save_infcall_control_state): ... here. Update the code for new
fields.
(restore_inferior_status): Rename to ...
(restore_infcall_control_state): ... here. Update the code for new
fields.
(do_restore_inferior_status_cleanup): Rename to ...
(do_restore_infcall_control_state_cleanup): ... here.
(make_cleanup_restore_inferior_status): Rename to ...
(make_cleanup_restore_infcall_control_state): ... here.
(discard_inferior_status): Rename to ...
(discard_infcall_control_state): ... here.
* alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h,
exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c,
inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c,
mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the
references to the moved fields and renamed functions.
Revert:
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <pedro@codesourcery.com>
* gdbthread.h (currently_stepping): New declaration.
* infrun.c (currently_stepping): Remove the forward declaration.
(currently_stepping): Make it global.
* linux-nat.c (resume_callback) <lp->stopped && lp->status == 0>: New
variables tp and step, initialized them. Pass STEP to to_resume.
Print also possibly "PTRACE_SINGLESTEP" if STEP. Initialize LP->STEP.
* remote.c (currently_stepping_callback): New.
(remote_vcont_resume)
<ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid)>:
New variable tp. Call currently_stepping_callback and step such
thread.
gdb/testsuite/
Revert:
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (linux_child_follow_fork): If we're staying attached
to the child process, enable event reporting on it. Don't handle
checkpoints here. Instead, add the child fork to the lwp thread
and inferior lists without clobbering the previous inferior. Let
the thread_db layer learn about a new child process, even if
following the parent.
(linux_nat_switch_fork): Delete lwps of the current inferior only,
instead of clearing the whole list. Use thread_change_ptid to
give the core the illusion the new checkpoint is still the same
inferior. Clear the register cache.
(linux_handle_extended_wait): Handle checkpoints here.
(linux_multi_process): Turn on.
* linux-fork.c (struct fork_info) <pc>: Remove field.
(init_fork_list): Do not delete the checkpoint from the inferior
list (it is not there).
(fork_load_infrun_state): Don't switch inferior_ptid here. Pass
the new checkpoint's ptid to linux_nat_switch_fork.
(fork_save_infrun_state): Make static. Don't stop the pc field of
fork_info, it's gone.
(linux_fork_mourn_inferior): Don't delete the checkpoint from the
inferior list, it's not there.
(linux_fork_detach): Ditto.
(delete_fork_command): Replace mention of fork/checkpoint by
checkpoint only.
(detach_fork_command): Likewise. Don't delete the checkpoint from
the inferior list.
(info_forks_command): Adjust.
(restore_detach_fork): Delete.
(checkpointing_pid): New.
(linux_fork_checkpointing_p): New.
(save_detach_fork): Delete.
(checkpoint_command): Delete temp_detach_fork. Don't remove
breakpoints, that's a nop. Store the pid of the process we're
checkpointing, and use make_cleanup_restore_integer to restore it.
Don't reinsert breakpoints here.
(process_command, fork_command): Delete.
(restart_command): Update comments to only mention checkpoints,
not forks.
(_initialize_linux_fork): Delete "fork", "process", "info forks"
commands.
* linux-fork.h (fork_save_infrun_state, fork_list): Delete
declarations.
(linux_fork_checkpointing_p): Declare.
* cli/cli-cmds.c (killlist): New.
* cli/cli-cmds.h (killlist): Declare.
* gdbcmd.h (killlist): Declare.
* inferior.c: Include "gdbthread.h".
(detach_inferior_command, kill_inferior_command)
(inferior_command): New.
(info_inferiors_command): Allow specifying a specific inferior id.
(_initialize_inferiors): Register "inferior", "kill inferior" and
"detach inferior" commands.
* infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
* gdbthread.h (any_thread_of_process): Declare.
* thread.c (any_thread_of_process): New.
* NEWS: Mention multi-inferior debugging. Mention 'info
inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
new commands.
(Removed commands): New section, mentioning that 'info forks',
'fork', 'process', 'delete fork' and 'detach fork' are now gone.
gdb/testsuite/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.base/multi-forks.exp: Only run detach-on-fork tests on
linux. Adjust to use "inferior", "info inferiors", "detach
inferior" and "kill inferior" instead of "restart", "info fork",
"detach fork" and "delete fork".
* gdb.base/ending-run.exp: Spell out "info".
* gdb.base/help.exp: Adjust to use test_prefix_command_help for
the "kill" command.
gdb/doc/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Debugging multiple inferiors): Document the
"inferior", "detach inferior" and "kill inferior" commands.
(Debugging Programs with Multiple Processes): Adjust to mention
generic "inferior" commands. Delete mention of "detach fork" and
"delete fork". Cross reference to "Debugging multiple inferiors"
section.
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
Global renaming of find_thread_pid to find_thread_ptid.
* gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
* thread.c (find_thread_ptid): Renamed from find_thread_pid.
All callers updated.
gdbserver:
Global renaming of find_thread_pid to find_thread_ptid.
* server.h (find_thread_ptid): Renamed from find_thread_pid.
* inferiors.c (find_thread_ptid): Renamed from find_thread_pid.
All callers updated.
* gdbthread.h (struct thread_info): New `pending_follow' field.
* thread.c (new_thread): New function.
(add_thread_silent): Use it.
* breakpoint.c (internal_breakpoint_number): New global, moved
from inside...
(create_internal_breakpoint): ... this.
(clone_momentary_breakpoint): New.
* breakpoint.h (clone_momentary_breakpoint): Declare.
* infrun.c (nullify_last_target_wait_ptid): Move declaration
higher.
(pending_follow): Delete.
(follow_fork): Handle pending follow fork event here. Moved the
preserving of thread stepping state here.
(resume): Don't handle pending follow fork events here. Only
install the inferior's terminal modes if we're about to resume it.
(proceed): Handle possible pending follow fork events here.
(init_wait_for_inferior): No need to clear pending_follow anymore,
it's gone.
(handle_inferior_event): Adjust to per-thread `pending_follow'.
Call `follow_fork' to handle following the fork. If the
follow-fork is cancelled, stop stepping.
* linux-nat.c (linux_child_follow_fork): Adjust to per-thread
`pending_follow' events. Remove code that handled preserving the
thread stepping state.
* inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
gdb/testsuite/
* gdb.threads/fork-thread-pending.c: New.
* gdb.threads/fork-thread-pending.exp: New.
if the thread's ptid without a thread id field is in the list
before calling thread_change_ptid.
(extended_remote_attach_1): In non-stop mode, do not rely on
querying the current thread, instead, query the thread list, and
select the first thread of the process.
* gdbthread.h (first_thread_of_process): Declare.
* thread.c (first_thread_of_process): Define.
Jan Kratochvil
Joel Brobecker
Siva Chandra
Pedro Alves
Doug Evans
Doug Evans
Yao Qi
Luis Machado
Markus Metzger
Joel Brobecker
Marc Khouzam
Michael Snyder
Tom Tromey
Vladimir Prus
Daniel Jacobowitz