When executing commands on a secondary UI running the MI interpreter,
some commands that should be synchronous are not. MI incorrectly
continues processing input right after the synchronous command is
sent, before the target stops.
The problem happens when we emit MI async events (=library-loaded,
etc.), and we go about restoring the previous terminal state, we end
up calling target_terminal_ours, which incorrectly always installs the
current UI's input_fd in the event loop... That is, code like this:
old_chain = make_cleanup_restore_target_terminal ();
target_terminal_ours_for_output ();
fprintf_unfiltered (mi->event_channel, "library-loaded");
...
do_cleanups (old_chain);
The fix is to move the add_file_handler/delete_file_handler calls out
of target_terminal_$foo, making these completely no-ops unless called
with the main UI as current UI.
gdb/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/20418
* event-top.c (ui_register_input_event_handler)
(ui_unregister_input_event_handler): New functions.
(async_enable_stdin): Register input in the event loop.
(async_disable_stdin): Unregister input from the event loop.
(gdb_setup_readline): Register input in the event loop.
* infrun.c (check_curr_ui_sync_execution_done): Register input in
the event loop.
* target.c (target_terminal_inferior): Don't unregister input from
the event loop.
(target_terminal_ours): Don't register input in the event loop.
* target.h (target_terminal_inferior)
(target_terminal_ours_for_output, target_terminal_ours): Update
comments.
* top.h (ui_register_input_event_handler)
(ui_unregister_input_event_handler): New declarations.
* utils.c (ui_unregister_input_event_handler_cleanup)
(prepare_to_handle_input): New functions.
(defaulted_query, prompt_for_continue): Use
prepare_to_handle_input.
gdb/testsuite/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
Simon Marchi <simon.marchi@ericsson.com>
PR gdb/20418
* gdb.mi/new-ui-mi-sync.c, gdb.mi/new-ui-mi-sync.exp: New files.
* lib/mi-support.exp (mi_expect_interrupt): Remove anchors.
Some analysis we did here showed that increasing the cap on the
transfer size in target.c:memory_xfer_partial could give 20% or more
improvement in remote load across JTAG. Transfer sizes were capped
to 4K bytes because of performance problems encountered with the
restore command, documented here:
https://sourceware.org/ml/gdb-patches/2013-07/msg00611.html
and in commit 67c059c29e ("Improve performance of large restore
commands").
The 4K cap was introduced because in a case where the restore command
requested a 100MB transfer, memory_xfer_partial would repeatedy
allocate and copy an entire 100MB buffer in order to properly handle
breakpoint shadow instructions, even though memory_xfer_partial would
actually only write a small portion of the buffer contents.
A couple of alternative solutions were suggested:
* change the algorithm for handling the breakpoint shadow instructions
* throttle the transfer size up or down based on the previous actual
transfer size
I tried implementing the throttling approach, and my implementation
reduced the performance in some cases.
This patch implements a new target function that returns that target's
limit on memory transfer size. It defaults to ULONGEST_MAX bytes,
because for native targets there is no marshaling and thus no limit is
needed. For remote targets it uses get_memory_write_packet_size.
gdb/ChangeLog:
* remote.c (remote_get_memory_xfer_limit): New function.
* target-delegates.c: Regenerate.
* target.c (memory_xfer_partial): Call
target_ops.to_get_memory_xfer_limit.
* target.h (struct target_ops)
<to_get_memory_xfer_limit>: New member.
Several targets have a copy of the same code that prints
"Detaching from program ..."
in their target_detach implementation. Factor that out to a common
function.
(For now, I left the couple targets that print this a bit differently
alone. Maybe this could be further pulled out into infcmd.c. If we
did that, and those targets want to continue printing differently,
this new function could be converted to a target method.)
gdb/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_detach): Use target_announce_detach.
* inf-ptrace.c (inf_ptrace_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
* target.c (target_announce_detach): New function.
* target.h (target_announce_detach): New declaration.
PR gdb/17210 concerns a possible memory leak in read_memory_robust.
The bug can happen because read_memory_robust allocates memory, does
not install any cleanups, and invokes QUIT. Similarly, target_read
calls QUIT, so it too can potentially throw.
The fix is to install cleanups to guard the allocated memory.
Built and regtested on x86-64 Fedora 23. I couldn't think of a way to
test this, so no new test; and of course this means it should have
more careful review.
2016-06-29 Tom Tromey <tom@tromey.com>
PR gdb/17210:
* target.c (free_memory_read_result_vector): Take a pointer to the
VEC as an argument.
(read_memory_robust): Install a cleanup for "result".
* mi/mi-main.c (mi_cmd_data_read_memory_bytes): Update.
When sync_execution (a boolean) is true, it means we're running a
foreground command -- we hide the prompt stop listening to input, give
the inferior the terminal, then go to the event loop waiting for the
target to stop.
With multiple independent UIs, we need to track whether each UI is
synchronously blocked waiting for the target. IOW, if you do
"continue" in one console, that console stops accepting commands, but
you should still be free to type other commands in the others
consoles.
Just simply making sync_execution be per-UI alone not sufficient,
because of this in fetch_inferior_event:
/* If the inferior was in sync execution mode, and now isn't,
restore the prompt (a synchronous execution command has finished,
and we're ready for input). */
if (current_ui->async && was_sync && !sync_execution)
observer_notify_sync_execution_done ();
We'd have to record at entry the "was_sync" state for each UI, not
just of the current UI.
This patch instead replaces the sync_execution flag by a per-UI
tristate flag indicating the command line prompt state:
enum prompt_state
{
/* The command line is blocked simulating synchronous execution.
This is used to implement the foreground execution commands
('run', 'continue', etc.). We won't display the prompt and
accept further commands until the execution is actually over. */
PROMPT_BLOCKED,
/* The command finished; display the prompt before returning back to
the top level. */
PROMPT_NEEDED,
/* We've displayed the prompt already, ready for input. */
PROMPTED,
;
I think the end result is _much_ clearer than the current code, and,
it addresses the original motivation too.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* annotate.c: Include top.h.
(async_background_execution_p): Delete.
(print_value_flags): Check the UI's prompt state rather then
async_background_execution_p.
* event-loop.c (start_event_loop): Set the prompt state to
PROMPT_NEEDED.
* event-top.c (display_gdb_prompt, async_enable_stdin)
(async_disable_stdin): Check the current UI's prompt state instead
of the sync_execution global.
(command_line_handler): Set the prompt state to PROMPT_NEEDED
before running a command, and display the prompt if still needed
afterwards.
* infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
(new_call_thread_fsm): New parameter 'waiting_ui'. Store it.
(call_thread_fsm_should_stop): Set the prompt state to
PROMPT_NEEDED.
(run_inferior_call): Adjust to temporarily set the prompt state to
PROMPT_BLOCKED instead of using the sync_execution global.
(call_function_by_hand_dummy): Pass the current UI to
new_call_thread_fsm.
* infcmd.c: Include top.h.
(continue_1): Check the current UI's prompt state instead of the
sync_execution global.
(continue_command): Validate global execution state before calling
prepare_execution_command.
(step_1): Call all_uis_check_sync_execution_done.
(attach_post_wait): Don't call async_enable_stdin here. Remove
reference to sync_execution.
* infrun.c (sync_execution): Delete global.
(follow_fork_inferior)
(reinstall_readline_callback_handler_cleanup): Check the current
UI's prompt state instead of the sync_execution global.
(check_curr_ui_sync_execution_done)
(all_uis_check_sync_execution_done): New functions.
(fetch_inferior_event): Call all_uis_check_sync_execution_done
instead of trying to determine whether the global sync execution
changed.
(handle_no_resumed): Check the prompt state of all UIs.
(normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
UIs. Emit the "Switching to" notification to all UIs. Enable
stdin in all UIs.
* infrun.h (sync_execution): Delete.
(all_uis_check_sync_execution_done): Declare.
* main.c (captured_command_loop): Don't call
interp_pre_command_loop if the prompt is blocked.
(catch_command_errors, catch_command_errors_const): Adjust.
(captured_main): Set the initial prompt state to PROMPT_NEEDED.
* mi/mi-interp.c (display_mi_prompt): Set the prompt state to
PROMPTED.
(mi_interpreter_resume): Don't clear sync_execution. Remove hack
comment.
(mi_execute_command_input_handler): Set the prompt state to
PROMPT_NEEDED before executing the command, and only display the
prompt if the prompt state is PROMPT_NEEDED afterwards.
(mi_on_resume_1): Adjust to check the prompt state.
* target.c (target_terminal_inferior): Adjust to check the prompt
state.
* top.c (wait_sync_command_done, maybe_wait_sync_command_done)
(execute_command): Check the current UI's prompt state instead of
sync_execution.
* top.h (enum prompt_state): New.
(struct ui) <prompt_state>: New field.
(ALL_UIS): New macro.
Since we always run the inferior in the main console (unless "set
inferior-tty" is in effect), when some UI other than the main one
calls target_terminal_inferior/target_terminal_inferior, then we only
register/unregister the UI's input from the event loop, but leave the
main UI's terminal settings as is.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* target.c (target_terminal_inferior): Bail out after
unregistering input_fd if not on the main UI.
(target_terminal_ours): Bail out after registering input_fd if not
on the main UI.
(target_terminal_ours_for_output): Bail out if not on the main UI.
And with that, we can switch the current UI to the UI whose input
descriptor woke up the event loop. IOW, if the user types in UI 2,
the event loop wakes up, switches to UI 2, and processes the input.
Next the user types in UI 3, the event loop wakes up and switches to
UI 3, etc.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* event-top.c (input_fd): Delete.
(stdin_event_handler): Switch to the UI whose input descriptor got
the event. Adjust to per-UI input_fd.
(gdb_setup_readline): Don't set the input_fd global. Adjust to
per-UI input_fd.
(gdb_disable_readline): Adjust to per-UI input_fd.
* event-top.h (input_fd): Delete declaration.
* linux-nat.c (linux_nat_terminal_inferior): Don't remove input_fd
from the event-loop here.
(linux_nat_terminal_ours): Don't register input_fd in the
event-loop here.
* main.c (captured_main): Adjust to per-UI input_fd.
* remote.c (remote_terminal_inferior): Don't remove input_fd from
the event-loop here.
(remote_terminal_ours): Don't register input_fd in the event-loop
here.
* target.c: Include top.h and event-top.h.
(target_terminal_inferior): Remove input_fd from the event-loop
here.
(target_terminal_ours): Register input_fd in the event-loop.
* top.h (struct ui) <input_fd>: New field.
If the user presses Ctrl-C immediately before target_terminal_inferior
is called and the target is resumed, instead of after, the Ctrl-C ends
up pending in the quit flag until the target next stops.
remote.c has this bit to handle this:
if (!target_is_async_p ())
{
ofunc = signal (SIGINT, sync_remote_interrupt);
/* If the user hit C-c before this packet, or between packets,
pretend that it was hit right here. */
if (check_quit_flag ())
sync_remote_interrupt (SIGINT);
}
But that's only reachable if async is off, while async is on by
default nowadays. It's also obviously not reacheable on native
targets.
This patch generalizes that to all targets.
We can't remove that remote.c bit yet, until we get rid of the sync
SIGINT handler though. That'll be done later in the series.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* remote.c (remote_pass_ctrlc): New function.
(init_remote_ops): Install it.
* target.c (target_terminal_inferior): Pass pending Ctrl-C to the
target.
(target_pass_ctrlc, default_target_pass_ctrlc): New functions.
* target.h (struct target_ops) <to_pass_ctrlc>: New method.
(target_pass_ctrlc, default_target_pass_ctrlc): New declarations.
* target-delegates.c: Regenerate.
This commit changes GDB to track thread numbers per-inferior. Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:
(gdb) info inferiors
Num Description Executable
1 process 6022 /home/pedro/gdb/tests/threads
* 2 process 6037 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
* 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
(gdb)
...
(gdb) thread 1.1
[Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
(gdb)
...
etc.
You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.
The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number. It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.
Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs. IOW, nothing
changes from a MI frontend's perspective.
Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too. Follow up patches will provide convenient means to access
threads' global IDs.
To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown. E.g,.:
(gdb) info inferiors
Num Description Executable
* 1 process 15275 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb) add-inferior
Added inferior 2
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb)
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
gdb/testsuite/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.base/break.exp: Adjust to output changes.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.linespec/keywords.exp: Likewise.
* gdb.multi/info-threads.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.multi/tids.c: New file.
* gdb.multi/tids.exp: New file.
gdb/doc/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document per-inferior thread IDs,
qualified thread IDs, global thread IDs and thread ID lists.
(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
thread IDs.
(Convenience Vars): Document the $_thread convenience variable.
(Ada Tasks): Adjust to refer to thread IDs.
(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
Commands, GDB/MI Variable Objects): Update to mention global
thread IDs.
* guile.texi (Breakpoints In Guile)
<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
global thread IDs instead of thread IDs.
* python.texi (Threads In Python): Adjust documentation of
InferiorThread.num.
(Breakpoint.thread): Mention global thread IDs instead of thread
IDs.
I see a timeout in gdb.base/random-signal.exp,
Continuing.^M
PASS: gdb.base/random-signal.exp: continue
^CPython Exception <type 'exceptions.KeyboardInterrupt'> <type
exceptions.KeyboardInterrupt'>: ^M
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
it can be reproduced by running random-signal.exp with native-gdbserver
in a loop, like this, and the fail will be shown in about 20 runs,
$ (set -e; while true; do make check RUNTESTFLAGS="--target_board=native-gdbserver random-signal.exp"; done)
In the test, the program is being single-stepped for software watchpoint,
and in each internal stop, python unwinder sniffer is used,
#0 pyuw_sniffer (self=<optimised out>, this_frame=<optimised out>, cache_ptr=0xd554f8) at /home/yao/SourceCode/gnu/gdb/git/gdb/python/py-unwind.c:608
#1 0x00000000006a10ae in frame_unwind_try_unwinder (this_frame=this_frame@entry=0xd554e0, this_cache=this_cache@entry=0xd554f8, unwinder=0xecd540)
at /home/yao/SourceCode/gnu/gdb/git/gdb/frame-unwind.c:107
#2 0x00000000006a143f in frame_unwind_find_by_frame (this_frame=this_frame@entry=0xd554e0, this_cache=this_cache@entry=0xd554f8)
at /home/yao/SourceCode/gnu/gdb/git/gdb/frame-unwind.c:163
#3 0x000000000069dc6b in compute_frame_id (fi=0xd554e0) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:454
#4 get_prev_frame_if_no_cycle (this_frame=this_frame@entry=0xd55410) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1781
#5 0x000000000069fdb9 in get_prev_frame_always_1 (this_frame=0xd55410) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1955
#6 get_prev_frame_always (this_frame=this_frame@entry=0xd55410) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1971
#7 0x00000000006a04b1 in get_prev_frame (this_frame=this_frame@entry=0xd55410) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:2213
when GDB goes to python extension, or other language extension, the
SIGINT handler is changed, and is restored when GDB leaves extension
language. GDB only stays in extension language for a very short period
in this case, but if ctrl-c is pressed at that moment, python extension
will handle the SIGINT, and exceptions.KeyboardInterrupt is shown.
Language extension is used in GDB side rather than inferior side,
so GDB should only change SIGINT handler for extension language when
the terminal is ours (not inferior's). This is what this patch does.
With this patch applied, I run random-signal.exp in a loop for 18
hours, and no fail is shown.
gdb:
2016-01-08 Yao Qi <yao.qi@linaro.org>
* extension.c: Include target.h.
(set_active_ext_lang): Only call install_gdb_sigint_handler,
check_quit_flag, and set_quit_flag if target_terminal_is_ours
returns false.
(restore_active_ext_lang): Likewise.
* target.c (target_terminal_is_ours): New function.
* target.h (target_terminal_is_ours): Declare.
When testing with "maint set target-non-stop on", a few
threading-related tests expose an issue that requires new RSP packets.
Say there are 3 threads running, 1-3. If GDB tries to stop thread 1,
2 and 3, and then waits for their stops, but meanwhile say, thread 2
exits, GDB hangs forever waiting for a stop for thread 2 that won't
ever happen.
This patch fixes the issue by adding support for thread exit events to
the protocol. However, we don't want these always enabled, as they're
useless most of the time, and would slow down remote debugging. So I
made it so that GDB can enable/disable them, and then made gdb do that
around the cases that need it, which currently is only
infrun.c:stop_all_threads.
In turn, if we have thread exit events, then the extra "thread x
exited" traffic slows down attach-many-short-lived-threads.exp enough
that gdb has trouble keeping up with new threads that are spawned
while gdb tries to stop existing ones. To fix that I added support
for the counterpart thread created events too. Enabling those when we
try to stop threads ensures that new threads never get a chance to
themselves start new threads, killing the race.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration): List "set/show remote
thread-events" command in configuration table.
(Stop Reply Packets): Document "T05 create" stop
reason and 'w' stop reply.
(General Query Packets): Document QThreadEvents packet. Document
QThreadEvents qSupported feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE. If GDB wants to hear about
thread create events, leave the new child's status pending.
(linux_low_filter_event): If GDB wants to hear about thread exit
events, leave the LWP marked dead and don't delete it.
(linux_wait_for_event_filtered): Don't check for thread exit.
(filter_exit_event): New function.
(linux_wait_1): Use it, when returning an exit event.
(linux_resume_one_lwp_throw): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* server.c (report_thread_events): New global.
(handle_general_set): Handle QThreadEvents.
(handle_query) <qSupported>: Handle and report QThreadEvents+;
(handle_target_event): Handle TARGET_WAITKIND_THREAD_CREATED and
TARGET_WAITKIND_THREAD_EXITED.
* server.h (report_thread_events): Declare.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New commands): Mention "set/show remote thread-events"
commands.
(New remote packets): Mention thread created/exited stop reasons
and QThreadEvents packet.
* infrun.c (disable_thread_events): New function.
(stop_all_threads): Disable/enable thread create/exit events.
Handle TARGET_WAITKIND_THREAD_EXITED.
(handle_inferior_event_1): Handle TARGET_WAITKIND_THREAD_CREATED
and TARGET_WAITKIND_THREAD_EXITED.
* remote.c (remove_child_of_pending_fork): Also remove threads of
threads that have TARGET_WAITKIND_THREAD_EXITED events.
(remote_parse_stop_reply): Handle "create" magic register. Handle
'w' stop reply.
(initialize_remote): Install remote_thread_events as
to_thread_events target hook.
(remote_thread_events): New function.
* target-delegates.c: Regenerate.
* target.c (target_thread_events): New function.
* target.h (struct target_ops) <to_thread_events>: New field.
(target_thread_events): Declare.
* target/waitstatus.c (target_waitstatus_to_string): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* target/waitstatus.h (enum target_waitkind)
<TARGET_WAITKIND_THREAD_CREATED, TARGET_WAITKIND_THREAD_EXITED):
New values.
Since this code path returns a string owned by the target (we don't know how
it's allocated, could be a static read-only string), it's safer if we return
a constant string. If, for some reasons, the caller wishes to modify the
string, it should make itself a copy.
gdb/ChangeLog:
* linux-nat.c (linux_nat_thread_name): Constify return value.
* target.h (struct target_ops) <to_thread_name>: Likewise.
(target_thread_name): Likewise.
* target.c (target_thread_name): Likewise.
* target-delegates.c (debug_thread_name): Regenerate.
* python/py-infthread.c (thpy_get_name): Constify local variables.
* thread.c (print_thread_info): Likewise.
(thread_find_command): Likewise.
This patch fixes a typo in target.c:read_memory_robust, where
it calls read_whatever_is_readable with the function arguments
in the wrong order. Depending on the address being read, it
can cause an xmalloc with a huge size, resulting in an assertion
failure, or just read something other than what was requested.
The problem only arises when GDB is handling an MI
"-data-read-memory-bytes" request and the initial target_read returns
an error status. Note that read_memory_robust is only called from
the MI code.
gdb/ChangeLog:
* gdb/target.c (read_memory_robust): Call
read_whatever_is_readable with arguments in the correct order.
Fixes:
src/gdb/remote.c: In function ‘void remote_unpush_target()’:
src/gdb/remote.c:4610:45: error: invalid conversion from ‘int’ to ‘strata’ [-fpermissive]
pop_all_targets_above (process_stratum - 1);
^
In file included from src/gdb/inferior.h:38:0,
from src/gdb/remote.c:25:
src/gdb/target.h:2299:13: error: initializing argument 1 of ‘void pop_all_targets_above(strata)’ [-fpermissive]
extern void pop_all_targets_above (enum strata above_stratum);
^
I used to carry a patch in the C++ branch that just did:
- pop_all_targets_above (process_stratum - 1);
+ pop_all_targets_above ((enum strata) (process_stratum - 1));
But then thought that maybe adding a routine that does exactly what we
need results in clearer code. This is the result.
gdb/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* remote.c (remote_unpush_target): Use
pop_all_targets_at_and_above instead of pop_all_targets_above.
* target.c (unpush_target_and_assert): New function, factored out
from ...
(pop_all_targets_above): ... here.
(pop_all_targets_at_and_above): New function.
* target.h (pop_all_targets_at_and_above): Declare.
Years ago, these functions used to return errno/EIO. Later, through a
series of changes that intended to remove native/remote differences,
they ended up returning a target_xfer_status in disguise.
Unlike target_xfer_partial&co, the point of target_read_memory&co is
to either fully succeed or fail. On error, they always return
TARGET_XFER_E_IO. So there's no real point in casting the return of
target_read_memory to a target_xfer_status to pass it to memory_error.
Instead, it results in clearer code to simply decouple
target_read_memory&co's return from target_xfer_status.
This fixes build errors like this in C++ mode:
../../src/gdb/corefile.c: In function ‘void read_stack(CORE_ADDR, gdb_byte*, ssize_t)’:
../../src/gdb/corefile.c:276:34: error: invalid conversion from ‘int’ to ‘target_xfer_status’ [-fpermissive]
memory_error (status, memaddr);
^
../../src/gdb/corefile.c:216:1: error: initializing argument 1 of ‘void memory_error(target_xfer_status, CORE_ADDR)’ [-fpermissive]
gdb/ChangeLog:
2015-10-27 Pedro Alves <palves@redhat.com>
* alpha-tdep.c (alpha_read_insn): Always pass TARGET_XFER_E_IO to
memory_error. Rename local 'status' to 'res'.
* c-lang.c (c_get_string): Always pass TARGET_XFER_E_IO to
memory_error.
* corefile.c (read_stack, read_code, write_memory): Always pass
TARGET_XFER_E_IO to memory_error.
* disasm.c (dis_asm_memory_error): Always pass TARGET_XFER_E_IO to
memory_error. Rename parameter 'status' to 'err'.
(dump_insns): Rename local 'status' to 'err'.
* mips-tdep.c (mips_fetch_instruction): Rename parameter 'statusp'
to 'errp'. Rename local 'status' to 'err'. Always pass
TARGET_XFER_E_IO to memory_error.
(mips_breakpoint_from_pc): Rename local 'status' to 'err'.
* target.c (target_read_memory, target_read_raw_memory)
(target_read_stack, target_read_code, target_write_memory)
(target_write_raw_memory): Return -1 on error instead of
TARGET_XFER_E_IO.
* valprint.c (val_print_string): Rename local 'errcode' to 'err'.
Always pass TARGET_XFER_E_IO to memory_error. Update comment.
Fixes some errors in C++ build.
gdb/ChangeLog:
* target.c (memory_xfer_partial): Change type of buf to gdb_byte
pointer.
(simple_search_memory): Cast return of memmem.
Add a new target method to_record_will_replay to query if there is a record
target that will replay at least one thread matching the argument PTID if it
were executed in the argument execution direction.
gdb/
* record-btrace.c ((record_btrace_will_replay): New.
(init_record_btrace_ops): Initialize to_record_will_replay.
* record-full.c ((record_full_will_replay): New.
(init_record_full_ops): Initialize to_record_will_replay.
* target-delegates.c: Regenerated.
* target.c (target_record_will_replay): New.
* target.h (struct target_ops) <to_record_will_replay>: New.
(target_record_will_replay): New.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
The to_record_is_replaying target method is used to query record targets if
they are replaying. This is currently interpreted as "is any thread being
replayed".
Add a PTID argument and change the interpretation to "is any thread matching
PTID being replayed".
Change all users to pass minus_one_ptid to preserve the old meaning.
The record full target does not really support multi-threading and ignores
the PTID argument.
gdb/
* record-btrace.c (record_btrace_is_replaying): Add ptid argument.
Update users to pass minus_one_ptid.
* record-full.c (record_full_is_replaying): Add ptid argument (ignored).
* record.c (cmd_record_delete): Pass inferior_ptid to
target_record_is_replaying.
* target-delegates.c: Regenerated.
* target.c (target_record_is_replaying): Add ptid argument.
* target.h (struct target_ops) <to_record_is_replaying>: Add ptid
argument.
(target_record_is_replaying): Add ptid argument.
This patch implements support for exec events on extended-remote Linux
targets. Follow-exec-mode and rerun behave as expected. Catchpoints and
test updates are implemented in subsequent patches.
This patch was derived from a patch posted last October:
https://sourceware.org/ml/gdb-patches/2014-10/msg00877.html.
It was originally based on some work done by Luis Machado in 2013.
IMPLEMENTATION
----------------
Exec events are enabled via ptrace options.
When an exec event is detected by gdbserver, the existing process
data, along with all its associated lwp and thread data, is deleted
and replaced by data for a new single-threaded process. The new
process data is initialized with the appropriate parts of the state
of the execing process. This approach takes care of several potential
pitfalls, including:
* deleting the data for an execing non-leader thread before any
wait/sigsuspend occurs
* correctly initializing the architecture of the execed process
We then report the exec event using a new RSP stop reason, "exec".
When GDB receives an "exec" event, it saves the status in the event
structure's target_waitstatus field, like what is done for remote fork
events. Because the original and execed programs may have different
architectures, we skip parsing the section of the stop reply packet
that contains register data. The register data will be retrieved
later after the inferior's architecture has been set up by
infrun.c:follow_exec.
At that point the exec event is handled by the existing event handling
in GDB. However, a few changes were necessary so that
infrun.c:follow_exec could accommodate the remote target.
* Where follow-exec-mode "new" is handled, we now call
add_inferior_with_spaces instead of add_inferior with separate calls
to set up the program and address spaces. The motivation for this
is that add_inferior_with_spaces also sets up the initial architecture
for the inferior, which is needed later by target_find_description
when it calls target_gdbarch.
* We call a new target function, target_follow_exec. This function
allows us to store the execd_pathname in the inferior, instead of
using the static string remote_exec_file from remote.c. The static
string didn't work for follow-exec-mode "new", since once you switched
to the execed program, the original remote exec-file was lost. The
execd_pathname is now stored in the inferior's program space as a
REGISTRY field. All of the requisite mechanisms for this are
defined in remote.c.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_mourn): Static declaration.
(linux_arch_setup): Move in front of
handle_extended_wait.
(linux_arch_setup_thread): New function.
(handle_extended_wait): Handle exec events. Call
linux_arch_setup_thread. Make event_lwp argument a
pointer-to-a-pointer.
(check_zombie_leaders): Do not check stopped threads.
(linux_low_ptrace_options): Add PTRACE_O_TRACEEXEC.
(linux_low_filter_event): Add lwp and thread for exec'ing
non-leader thread if leader thread has been deleted.
Refactor code into linux_arch_setup_thread and call it.
Pass child lwp pointer by reference to handle_extended_wait.
(linux_wait_for_event_filtered): Update comment.
(linux_wait_1): Prevent clobbering exec event status.
(linux_supports_exec_events): New function.
(linux_target_ops) <supports_exec_events>: Initialize new member.
* lynx-low.c (lynx_target_ops) <supports_exec_events>: Initialize
new member.
* remote-utils.c (prepare_resume_reply): New stop reason 'exec'.
* server.c (report_exec_events): New global variable.
(handle_query): Handle qSupported query for exec-events feature.
(captured_main): Initialize report_exec_events.
* server.h (report_exec_events): Declare new global variable.
* target.h (struct target_ops) <supports_exec_events>: New
member.
(target_supports_exec_events): New macro.
* win32-low.c (win32_target_ops) <supports_exec_events>:
Initialize new member.
gdb/ChangeLog:
* infrun.c (follow_exec): Use process-style ptid for
exec message. Call add_inferior_with_spaces and
target_follow_exec.
* nat/linux-ptrace.c (linux_supports_traceexec): New function.
* nat/linux-ptrace.h (linux_supports_traceexec): Declare.
* remote.c (remote_pspace_data): New static variable.
(remote_pspace_data_cleanup): New function.
(get_remote_exec_file): New function.
(set_remote_exec_file_1): New function.
(set_remote_exec_file): New function.
(show_remote_exec_file): New function.
(remote_exec_file): Delete static variable.
(anonymous enum) <PACKET_exec_event_feature> New
enumeration constant.
(remote_protocol_features): Add entry for exec-events feature.
(remote_query_supported): Add client side of qSupported query
for exec-events feature.
(remote_follow_exec): New function.
(remote_parse_stop_reply): Handle 'exec' stop reason.
(extended_remote_run, extended_remote_create_inferior): Call
get_remote_exec_file and set_remote_exec_file_1.
(init_extended_remote_ops) <to_follow_exec>: Initialize new
member.
(_initialize_remote): Call
register_program_space_data_with_cleanup. Call
add_packet_config_cmd for remote exec-events feature.
Modify call to add_setshow_string_noescape_cmd for exec-file
to use new functions set_remote_exec_file and
show_remote_exec_file.
* target-debug.h, target-delegates.c: Regenerated.
* target.c (target_follow_exec): New function.
* target.h (struct target_ops) <to_follow_exec>: New member.
(target_follow_exec): Declare new function.
This patch makes the execution control code use largely the same
mechanisms in both sync- and async-capable targets. This means using
continuations and use the event loop to react to target events on sync
targets as well. The trick is to immediately mark infrun's event loop
source after resume instead of calling wait_for_inferior. Then
fetch_inferior_event is adjusted to do a blocking wait on sync
targets.
Tested on x86_64 Fedora 20, native and gdbserver, with and without
"maint set target-async off".
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_do_actions_1, until_break_command): Don't
check whether the target can async.
* inf-loop.c (inferior_event_handler): Only call target_async if
the target can async.
* infcall.c: Include top.h and interps.h.
(run_inferior_call): For the interpreter to sync mode while
running the infcall. Call wait_sync_command_done instead of
wait_for_inferior plus normal_stop.
* infcmd.c (prepare_execution_command): Don't check whether the
target can async when running in the foreground.
(step_1): Delete synchronous case handling.
(step_once): Always install a continuation, even in sync mode.
(until_next_command, finish_forward): Don't check whether the
target can async.
(attach_command_post_wait, notice_new_inferior): Always install a
continuation, even in sync mode.
* infrun.c (mark_infrun_async_event_handler): New function.
(proceed): In sync mode, mark infrun's event source instead of
waiting for events here.
(fetch_inferior_event): If the target can't async, do a blocking
wait.
(prepare_to_wait): In sync mode, mark infrun's event source.
(infrun_async_inferior_event_handler): No longer bail out if the
target can't async.
* infrun.h (mark_infrun_async_event_handler): New declaration.
* linux-nat.c (linux_nat_wait_1): Remove calls to
set_sigint_trap/clear_sigint_trap.
(linux_nat_terminal_inferior): No longer check whether the target
can async.
* mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify
comment.
(mi_execute_command_input_handler): No longer check whether the
target is async. Update and simplify comment.
* target.c (default_target_wait): New function.
* target.h (struct target_ops) <to_wait>: Now defaults to
default_target_wait.
(default_target_wait): Declare.
* top.c (wait_sync_command_done): New function, factored out from
...
(maybe_wait_sync_command_done): ... this.
* top.h (wait_sync_command_done): Declare.
* target-delegates.c: Regenerate.
We currently set attach_flag when attaching to a process, so we should
make sure to unset it when forking a new process. Otherwise attach_flag
would remain set after forking, if the previous process associated with
the inferior was attached to.
gdb/ChangeLog:
* target.c (target_pre_inferior): Unset attach_flag.
gdb/testsuite/ChangeLog:
* gdb.base/run-after-attach.exp: New test file.
* gdb.base/run-after-attach.c: New test file.
Currently, when remote debugging, if you type Ctrl-C just while the
target stopped for an internal event, and GDB is busy doing something
that takes a while (e.g., fetching chunks of a shared library off of
the target, with vFile, to process ELF headers and debug info), the
Ctrl-C is lost.
The patch hooks up the QUIT macro to a new target method that lets the
target react to the double-Ctrl-C before the event loop is reached,
which allows reacting to a double-Ctrl-C even when GDB is busy doing
some long operation and not waiting for a stop reply. That end result
is:
(gdb) c
Continuing.
^C
^C
Interrupted while waiting for the program.
Give up waiting? (y or n) y
Quit
(gdb) info threads
Id Target Id Frame
* 1 Thread 11673 0x00007ffff7deb240 in _dl_debug_state () from target:/lib64/ld-linux-x86-64.so.2
(gdb)
If, however, GDB is waiting for a stop reply (because the target has
been resumed, with e.g., vCont;c), but the target isn't responding, we
now get:
(gdb) c
Continuing.
^C
^C
The target is not responding to interrupt requests.
Stop debugging it? (y or n) y
Disconnected from target.
(gdb) info threads
No threads.
This offers to disconnect, because when we're waiting for a stop
reply, there's nothing else we can send the target other than an
interrupt request. And if that doesn't work, there's nothing else we
can do.
The Ctrl-C is presently lost because until we get to a user-visible
stop, the SIGINT handler that is installed is the one that forwards
the interrupt to the remote side, with the \003 "packet" [1]. But,
gdbserver ignores an interrupt request if the program is stopped.
Still, even if it didn't, the server can only report back a
stop-because-of-SIGINT when the program is next resumed. And it may
take a while to actually re-resume the target.
[1] - In the old sync days, the remote target would react to a
double-Ctrl-C by asking users whether they wanted to give up waiting
and disconnect. The code is still there, but it it isn't reacheable
on most hosts, which support serial connections in async mode
(probably only DJGPP doesn't). Even then, in sync mode, remote.c's
SIGINT handler is only installed while the target is resumed, and is
removed as soon as the target sends back a stop reply. That means
that a Ctrl-C just while GDB is processing an internal event can end
up with an odd "Quit" at the prompt instead of "Program stopped by
SIGINT". In contrast, in async mode, remote.c's SIGINT handler is set
up as long as target_terminal_inferior or
target_terminal_ours_for_output are in effect (IOW, until we get a
user-visible stop and call target_terminal_ours), so the user
shouldn't get back a spurious Quit. However, it's still desirable to
be able to interrupt a long-running GDB operation, if GDB takes a
while to re-resume the target or get back to the event loop.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* defs.h (maybe_quit): Declare.
(QUIT): Now calls maybe_quit.
* event-loop.c (clear_async_signal_handler)
(async_signal_handler_is_marked): New functions.
* event-loop.h (async_signal_handler_is_marked)
(clear_async_signal_handler): New declarations.
* remote.c (remote_check_pending_interrupt): New function.
(interrupt_query): Use make_cleanup_restore_target_terminal. No
longer check whether the target is async. If waiting for a stop
reply, and a Ctrl-C as been sent to the target, offer to
disconnect, and throw TARGET_CLOSE_ERROR instead of a quit.
Otherwise do not disconnect and throw a quit.
(_initialize_remote): Install remote_check_pending_interrupt as
to_check_pending_interrupt.
* target.c (target_check_pending_interrupt): New function.
* target.h (struct target_ops) <to_check_pending_interrupt>: New
field.
(target_check_pending_interrupt): New declaration.
* utils.c (maybe_quit): New function.
* target-delegates.c: Regenerate.
GDB provides no indicator of progress during file operations, and can
appear to have locked up during slow remote transfers. This commit
updates GDB to print a warning each time a file is accessed over RSP.
An additional message detailing how to avoid remote transfers is
printed for the first transfer only.
gdb/ChangeLog:
* target.h (struct target_ops) <to_fileio_open>: New argument
warn_if_slow. Update comment. All implementations updated.
(target_fileio_open_warn_if_slow): New declaration.
* target.c (target_fileio_open): Renamed as...
(target_fileio_open_1): ...this. New argument warn_if_slow.
Pass warn_if_slow to implementation. Update debug printing.
(target_fileio_open): New function.
(target_fileio_open_warn_if_slow): Likewise.
* gdb_bfd.c (gdb_bfd_iovec_fileio_open): Use new function
target_fileio_open_warn_if_slow.
gdb/testsuite/ChangeLog:
* gdb.trace/pending.exp: Cope with remote transfer warnings.
With "maint set target-non-stop on" we get:
@@ -66,13 +66,16 @@ Continuing.
interrupt
(gdb) PASS: gdb.base/interrupt-noterm.exp: interrupt
-Program received signal SIGINT, Interrupt.
-PASS: gdb.base/interrupt-noterm.exp: inferior received SIGINT
-testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 0 seconds
+[process 12119] #1 stopped.
+0x0000003615ebc6d0 in __nanosleep_nocancel () at ../sysdeps/unix/syscall-template.S:81
+81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
+FAIL: gdb.base/interrupt-noterm.exp: inferior received SIGINT (timeout)
+testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 10 seconds
That is, we get "[$thread] #1 stopped" instead of SIGINT.
The issue is that we don't currently distinguish send
"interrupt/ctrl-c" to target terminal vs "stop/pause" thread well;
both cases go through "target_stop".
And then, the native Linux backend (linux-nat.c) implements
target_stop with SIGSTOP in non-stop mode, and SIGINT in all-stop
mode. Since "maint set target-non-stop on" forces the backend to be
always running in non-stop mode, even though the user-visible behavior
is "set non-stop" is "off", "interrupt" causes a SIGSTOP instead of
the SIGINT the test expects.
Fix this by introducing a target_interrupt method to use in the
"interrupt/ctrl-c" case, so "set non-stop off" can always work the
same irrespective of "maint set target-non-stop on/off". I'm
explictly considering changing the "set non-stop on" behavior as out
of scope here.
Most of the patch is an across-the-board rename of to_stop hook
implementations to to_interrupt. The only targets where something
more than a rename is being done are linux-nat.c and remote.c, which
are the only targets that support async, and thus are the only ones
the core side calls target_stop on.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_stop): Rename to ...
(darwin_interrupt): ... this.
(_initialize_darwin_inferior): Adjust.
* gnu-nat.c (gnu_stop): Delete.
(gnu_target): Don't install gnu_stop.
* inf-ptrace.c (inf_ptrace_stop): Rename to ...
(inf_ptrace_interrupt): ... this.
(inf_ptrace_target): Adjust.
* infcmd.c (interrupt_target_1): Use target_interrupt instead of
target_stop.
* linux-nat (linux_nat_stop): Rename to ...
(linux_nat_interrupt): ... this.
(linux_nat_stop): Reimplement.
(linux_nat_add_target): Install linux_nat_interrupt.
* nto-procfs.c (nto_interrupt_twice): Rename to ...
(nto_handle_sigint_twice): ... this.
(nto_interrupt): Rename to ...
(nto_handle_sigint): ... this. Call target_interrupt instead of
target_stop.
(procfs_wait): Adjust.
(procfs_stop): Rename to ...
(procfs_interrupt): ... this.
(init_procfs_targets): Adjust.
* procfs.c (procfs_stop): Rename to ...
(procfs_interrupt): ... this.
(procfs_target): Adjust.
* remote-m32r-sdi.c (m32r_stop): Rename to ...
(m32r_interrupt): ... this.
(init_m32r_ops): Adjust.
* remote-sim.c (gdbsim_stop_inferior): Rename to ...
(gdbsim_interrupt_inferior): ... this.
(gdbsim_stop): Rename to ...
(gdbsim_interrupt): ... this.
(gdbsim_cntrl_c): Adjust.
(init_gdbsim_ops): Adjust.
* remote.c (sync_remote_interrupt): Adjust comments.
(remote_stop_as): Rename to ...
(remote_interrupt_as): ... this.
(remote_stop): Adjust comment.
(remote_interrupt): New function.
(init_remote_ops): Install remote_interrupt.
* target.c (target_interrupt): New function.
* target.h (struct target_ops) <to_interrupt>: New field.
(target_interrupt): New declaration.
* windows-nat.c (windows_stop): Rename to ...
(windows_interrupt): ... this.
* target-delegates.c: Regenerate.
This finally implements user-visible all-stop mode running with the
target_ops backend always in non-stop mode. This is a stepping stone
towards finer-grained control of threads, being able to do interesting
things like thread groups, associating groups with breakpoints, etc.
From the user's perspective, all-stop mode is really just a special
case of being able to stop and resume specific sets of threads, so it
makes sense to do this step first.
With this, even in all-stop, the target is no longer in charge of
stopping all threads before reporting an event to the core -- the core
takes care of it when it sees fit. For example, when "next"- or
"step"-ing, we can avoid stopping and resuming all threads at each
internal single-step, and instead only stop all threads when we're
about to present the stop to the user.
The implementation is almost straight forward, as the heavy lifting
has been done already in previous patches. Basically, we replace
checks for "set non-stop on/off" (the non_stop global), with calls to
a new target_is_non_stop_p function. In a few places, if "set
non-stop off", we stop all threads explicitly, and in a few other
places we resume all threads explicitly, making use of existing
methods that were added for teaching non-stop to step over breakpoints
without displaced stepping.
This adds a new "maint set target-non-stop on/off/auto" knob that
allows both disabling the feature if we find problems, and
force-enable it for development (useful when teaching a target about
this. The default is "auto", which means the feature is enabled if a
new target method says it should be enabled. The patch implements the
method in linux-nat.c, just for illustration, because it still returns
false. We'll need a few follow up fixes before turning it on by
default. This is a separate target method from indicating regular
non-stop support, because e.g., while e.g., native linux-nat.c is
close to regression free with all-stop-non-stop (with following
patches will fixing the remaining regressions), remote.c+gdbserver
will still need more fixing, even though it supports "set non-stop
on".
Tested on x86_64 Fedora 20, native, with and without "set displaced
off", and with and without "maint set target-non-stop on"; and also
against gdbserver.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* NEWS: Mention "maint set/show target-non-stop".
* breakpoint.c (update_global_location_list): Check
target_is_non_stop_p instead of non_stop.
* infcmd.c (attach_command_post_wait, attach_command): Likewise.
* infrun.c (show_can_use_displaced_stepping)
(can_use_displaced_stepping_p, start_step_over_inferior):
Likewise.
(internal_resume_ptid): New function.
(resume): Use it.
(proceed): Check target_is_non_stop_p instead of non_stop. If in
all-stop mode but the target is always in non-stop mode, start all
the other threads that are implicitly resumed too.
(for_each_just_stopped_thread, fetch_inferior_event)
(adjust_pc_after_break, stop_all_threads): Check
target_is_non_stop_p instead of non_stop.
(handle_inferior_event): Likewise. Handle detach-fork in all-stop
with the target always in non-stop mode.
(handle_signal_stop) <random signal>: Check target_is_non_stop_p
instead of non_stop.
(switch_back_to_stepped_thread): Check target_is_non_stop_p
instead of non_stop.
(keep_going_stepped_thread): Use internal_resume_ptid.
(stop_waiting): If in all-stop mode, and the target is in non-stop
mode, stop all threads.
(keep_going_pass): Likewise, when starting a new in-line step-over
sequence.
* linux-nat.c (get_pending_status, select_event_lwp)
(linux_nat_filter_event, linux_nat_wait_1, linux_nat_wait): Check
target_is_non_stop_p instead of non_stop.
(linux_nat_always_non_stop_p): New function.
(linux_nat_stop): Check target_is_non_stop_p instead of non_stop.
(linux_nat_add_target): Install linux_nat_always_non_stop_p.
* target-delegates.c: Regenerate.
* target.c (target_is_non_stop_p): New function.
(target_non_stop_enabled, target_non_stop_enabled_1): New globals.
(maint_set_target_non_stop_command)
(maint_show_target_non_stop_command): New functions.
(_initilize_target): Install "maint set/show target-non-stop"
commands.
* target.h (struct target_ops) <to_always_non_stop_p>: New field.
(target_non_stop_enabled): New declaration.
(target_is_non_stop_p): New declaration.
gdb/doc/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Maintenance Commands): Document "maint set/show
target-non-stop".
That is, step past breakpoints by:
- pausing all threads
- removing breakpoint at PC
- single-step
- reinsert breakpoint
- restart threads
similarly to all-stop (with displaced stepping disabled). This allows
non-stop to work on targets/architectures without displaced stepping
support. That is, it makes displaced stepping an optimization instead
of a requirement. For example, in principle, all GNU/Linux ports
support non-stop mode at the target_ops level, but not all
corresponding gdbarch's implement displaced stepping. This should
make non-stop work for all (albeit, not as efficiently). And then
there are scenarios where even if the architecture supports displaced
stepping, we can't use it, because we e.g., don't find a usable
address to use as displaced step scratch pad. It should also fix
stepping past watchpoints on targets that have non-continuable
watchpoints in non-stop mode (e.g., PPC, untested). Running the
instruction out of line in the displaced stepping scratch pad doesn't
help that case, as the copied instruction reads/writes the same
watched memory... We can fix that too by teaching GDB to only remove
the watchpoint from the thread that we want to move past the
watchpoint (currently, removing a watchpoint always removes it from
all threads), but again, that can be considered an optimization; not
all targets would support it.
For those familiar with the gdb and gdbserver Linux target_ops
backends, the implementation should look similar, except it is done on
the core side. When we pause threads, we may find they stop with an
interesting event that should be handled later when the thread is
re-resumed, thus we store such events in the thread object, and mark
the event as pending. We should only consume pending events if the
thread is indeed resumed, thus we add a new "resumed" flag to the
thread object. At a later stage, we might add new target methods to
accelerate some of this, like "pause all threads", with corresponding
RSP packets, but we'd still need a fallback method for remote targets
that don't support such packets, so, again, that can be deferred as
optimization.
My _real_ motivation here is making it possible to reimplement
all-stop mode on top of the target always working on non-stop mode, so
that e.g., we can send RSP packets to a remote target even while the
target is running -- can't do that in the all-stop RSP variant, by
design).
Tested on x86_64 Fedora 20, with and without "set displaced off"
forced. The latter forces the new code paths whenever GDB needs to
step past a breakpoint.
gdb/ChangeLog:
2015-08-07 Pedro Alves <pedro@codesourcery.com>
* breakpoint.c (breakpoints_should_be_inserted_now): If any thread
has a pending status, return true.
* gdbthread.h: Include target/waitstatus.h.
(struct thread_suspend_state) <stop_reason, waitstatus_pending_p,
stop_pc>: New fields.
(struct thread_info) <resumed>: New field.
(set_resumed): Declare.
* infrun.c: Include "event-loop.h".
(infrun_async_inferior_event_token, infrun_is_async): New globals.
(infrun_async): New function.
(clear_step_over_info): Add debug output.
(displaced_step_in_progress_any_inferior): New function.
(displaced_step_fixup): New returns int.
(start_step_over): Handle in-line step-overs too. Assert the
thread is marked resumed.
(resume_cleanups): Clear the thread's resumed flag.
(resume): Set the thread's resumed flag. Return early if the
thread has a pending status. Allow stepping a breakpoint with no
signal.
(proceed): Adjust to check 'resumed' instead of 'executing'.
(clear_proceed_status_thread): If the thread has a pending status,
and that status is a finished step, discard the pending status.
(clear_proceed_status): Don't clear step_over_info here.
(random_pending_event_thread, do_target_wait): New functions.
(prepare_for_detach, wait_for_inferior, fetch_inferior_event): Use
do_target_wait.
(wait_one): New function.
(THREAD_STOPPED_BY): New macro.
(thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint)
(thread_stopped_by_hw_breakpoint): New functions.
(switch_to_thread_cleanup, save_waitstatus, stop_all_threads): New
functions.
(handle_inferior_event): Also call set_resumed(false) on all
threads implicitly stopped by the event.
(restart_threads, resumed_thread_with_pending_status): New
functions.
(finish_step_over): If we were doing an in-line step-over before,
and no longer are after trying to start a new step-over, restart
all threads. If we have multiple threads with pending events,
save the current event and go through the event loop again.
(handle_signal_stop): Return early if finish_step_over returns
false.
<random signal>: If we get a signal while stepping over a
breakpoint in-line in non-stop mode, restart all threads. Clear
step_over_info before delivering the signal.
(keep_going_stepped_thread): Use internal_error instead of
gdb_assert. Mark the thread as resumed.
(keep_going_pass_signal): Assert the thread isn't already resumed.
If some other thread is doing an in-line step-over, defer the
resume. If we just started a new in-line step-over, stop all
threads. Don't clear step_over_info.
(infrun_async_inferior_event_handler): New function.
(_initialize_infrun): Create async event handler with
infrun_async_inferior_event_handler as callback.
(infrun_async): New declaration.
* target.c (target_async): New function.
* target.h (target_async): Declare macro and readd as function
declaration.
* target/waitstatus.h (enum target_stop_reason)
<TARGET_STOPPED_BY_SINGLE_STEP>: New value.
* thread.c (new_thread): Clear the new waitstatus field.
(set_resumed): New function.
Right now this variable is initialized to 0 i.e. terminal_is_inferior
and does not get set to terminal_is_ours until target_terminal_init() is
called. This function however only gets called when an inferior is
first created. In the meantime, terminal_state would wrongly remain set
to terminal_is_inferior.
Tested on x86_64 Debian Stretch -- native, gdbserver and
extended-gdbserver.
gdb/ChangeLog:
* target.c (terminal_state): Initialize to terminal_is_ours.
We see the following regressions in testing on x86_64-linux,
reverse-step^M
Cannot access memory at address 0x2aaaaaed26c0^M
(gdb) FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
when GDB reverse step into a function, GDB wants to skip prologue so
it requests TARGET_OBJECT_CODE_MEMORY to read some code memory in
memory_xfer_partial_1. However in dcache_read_memory_partial, the object
becomes TARGET_OBJECT_MEMORY
return ops->to_xfer_partial (ops, TARGET_OBJECT_MEMORY, NULL,
myaddr, NULL, memaddr, len,
xfered_len);
in reverse debugging, ops->to_xfer_partial is record_full_core_xfer_partial
and it will return TARGET_XFER_E_IO because it can't find any records.
The test fails.
At this moment, the delegate relationship is like
dcache -> record-core -> core -> exec
and we want to GDB read memory across targets, which means if the
requested memory isn't found in record-core, GDB can read memory from
core, and exec even further if needed. I find raw_memory_xfer_partial
is exactly what I want.
gdb:
2015-07-29 Yao Qi <yao.qi@linaro.org>
PR record/18691
* dcache.c (dcache_read_memory_partial): Call
raw_memory_xfer_partial.
* target.c (raw_memory_xfer_partial): Make it non-static.
* target.h (raw_memory_xfer_partial): Declare.
This should be just a move with no changes.
gdb/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
Move linux_find_memory_regions_full & co.
* linux-tdep.c (nat/linux-maps.h): Include.
(gdb_regex.h): Remove the include.
(enum filterflags, struct smaps_vmflags, read_mapping, decode_vmflags)
(mapping_is_anonymous_p, dump_mapping_p): Moved to nat/linux-maps.c.
(linux_find_memory_region_ftype): Moved typedef to nat/linux-maps.h.
(linux_find_memory_regions_full): Moved definition to nat/linux-maps.c.
* nat/linux-maps.c: Include ctype.h, target/target-utils.h, gdb_regex.h
and target/target.h.
(struct smaps_vmflags, read_mapping, decode_vmflags)
(mapping_is_anonymous_p, dump_mapping_p): Move from linux-tdep.c.
(linux_find_memory_regions_full): Move from linux-tdep.c.
* nat/linux-maps.h (read_mapping): New declaration.
(linux_find_memory_region_ftype, enum filterflags): Moved from
linux-tdep.c.
(linux_find_memory_regions_full): New declaration.
* target.c (target/target-utils.h): Include.
(read_alloc_pread_ftype): Moved typedef to target/target-utils.h.
(read_alloc, read_stralloc_func_ftype, read_stralloc): Moved
definitions to target/target-utils.c.
* target.h (target_fileio_read_stralloc): Move it to target/target.h.
* target/target-utils.c (read_alloc, read_stralloc): Move definitions
from target.c.
* target/target-utils.h (read_alloc_pread_ftype): New typedef.
(read_alloc): New declaration.
(read_stralloc_func_ftype): New typedef.
(read_stralloc): New declaration.
* target/target.h (target_fileio_read_stralloc): Move it from target.h.
gdb/gdbserver/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
* target.c: Include target/target-utils.h and fcntl.h.
(target_fileio_read_stralloc_1_pread, target_fileio_read_stralloc_1)
(target_fileio_read_stralloc): New functions.
Prepare code for move into gdb/common/.
gdb/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
Prepare linux_find_memory_regions_full & co. for move.
* linux-tdep.c (linux_find_memory_region_ftype): Comment.
(linux_find_memory_regions_full): Change signature and prepare
for moving to linux-maps.
(linux_find_memory_regions_data): Rename field 'obfd' to 'data'.
(linux_find_memory_regions_thunk): New.
(linux_find_memory_regions_thunk): Use 'data' field instead of 'obfd'.
(linux_find_memory_regions_gdb): New.
(linux_find_memory_regions): Rename argument 'obfd' to 'func_data'.
(linux_make_mappings_corefile_notes): Use
linux_find_memory_regions_gdb.
* target.c (read_alloc_pread_ftype): New typedef.
(target_fileio_read_alloc_1_pread): New function.
(read_alloc): Refactor from target_fileio_read_alloc_1.
(read_stralloc_func_ftype): New typedef.
(target_fileio_read_alloc_1): New implementation. Use read_alloc.
(read_stralloc): Refactored from target_fileio_read_stralloc.
(target_fileio_read_stralloc): New implementation, use read_stralloc.
If we are reading/writing from a memory object, the length represents
the number of "addresses" to read/write, so the addressable unit size
needs to be taken into account when allocating memory on gdb's side.
gdb/ChangeLog:
* target.c (target_read): Consider addressable unit size when
reading from a memory object.
(read_memory_robust): Same.
(read_whatever_is_readable): Same.
(target_write_with_progress): Consider addressable unit size
when writing to a memory object.
* target.h (target_read): Update documentation.
(target_write): Add documentation.
This contains various cleanups in the target memory read and write code.
They are not directly related to the non-8-bits changes, but they
clarify things a bit down the line.
gdb/ChangeLog:
* target.c (target_read): Rename variables and use
TARGET_XFER_E_IO.
(target_read_with_progress): Same.
(read_memory_robust): Constify parameters and rename
variables.
(read_whatever_is_readable): Constify parameters,
rename variables, adjust formatting.
* target.h (read_memory_robust): Constify parameters.
This commit adds a new argument to all target_fileio functions with
filename arguments to allow the desired inferior to be specified.
This allows GDB to support systems where processes do not necessarily
share a common filesystem.
gdb/ChangeLog:
* target.h (struct inferior): New forward declaration.
(struct target_ops) <to_filesystem_is_local>: Update comment.
(struct target_ops) <to_fileio_open>: New argument inf.
Update comment. All implementations updated.
(struct target_ops) <to_fileio_unlink>: Likewise.
(struct target_ops) <to_fileio_readlink>: Likewise.
(target_filesystem_is_local): Update comment.
(target_fileio_open): New argument inf. Update comment.
(target_fileio_unlink): Likewise.
(target_fileio_readlink): Likewise.
(target_fileio_read_alloc): Likewise.
(target_fileio_read_stralloc): Likewise.
* target.c (target_fileio_open): New argument inf.
Pass inf to implementation. Update debug printing.
(target_fileio_unlink): Likewise.
(target_fileio_readlink): Likewise.
(target_fileio_read_alloc_1): New argument inf. Pass inf
to target_fileio_open.
(target_fileio_read_alloc): New argument inf. Pass inf to
target_fileio_read_alloc_1.
(target_fileio_read_stralloc): Likewise.
* gdb_bfd.c (inferior.h): New include.
(gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
argument with new argument "inferior". Pass inferior to
target_fileio_open.
(gdb_bfd_open): Supply inferior argument to
gdb_bfd_iovec_fileio_open.
* linux-tdep.c (linux_info_proc): Supply inf argument to
relevant target_fileio calls.
(linux_find_memory_regions_full): Likewise.
(linux_fill_prpsinfo): Likewise.
* remote.c (remote_filesystem_is_local): Supply inf
argument to remote_hostio_open.
(remote_file_put): Likewise.
(remote_file_get): Likewise.
(remote_file_delete): Supply inf argument to
remote_hostio_unlink.
This commit introduces a new target method target_fileio_fstat
which can be used to retrieve information about files opened with
target_fileio_open.
gdb/ChangeLog:
* target.h (struct target_ops) <to_fileio_fstat>: New field.
(target_fileio_fstat): New declaration.
* target.c (target_fileio_fstat): New function.
* inf-child.c (inf_child_fileio_fstat): Likewise.
(inf_child_target): Initialize to_fileio_fstat.
* remote.c (init_remote_ops): Likewise.
Various target_fileio_* functions use integer file descriptors to
refer to open files. File operation functions are looked up from
the target stack as they are used, which causes problems if the
target stack changes after the file is opened.
For example, if a file is opened on a remote target and the remote
target disconnects or closes the remote target will be popped off
the stack. If target_fileio_close is then called on that file and
"set auto-connect-native-target" is "on" (the default) then the
native target's close method will be called. If the file opened
on the remote happens to share the same number with a file open in
GDB then that file will be closed by mistake.
This commit changes target_fileio_open to store newly opened file
descriptors in a table together with the target_ops used to open
them. The index into the table is returned and used as the file
descriptor argument to all target_fileio_* functions that accept
file descriptor arguments.
gdb/ChangeLog:
* target.c (fileio_ft_t): New typedef, define object vector.
(fileio_fhandles): New static variable.
(is_closed_fileio_fh): New macro.
(lowest_closed_fd): New static variable.
(acquire_fileio_fd): New function.
(release_fileio_fd): Likewise.
(fileio_fd_to_fh): New macro.
(target_fileio_open): Wrap the file descriptor on success.
(target_fileio_pwrite): Updated to use wrapped file descriptor.
(target_fileio_pread): Likewise.
(target_fileio_close): Likewise.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
record-btrace was the only target making use of this, and it no longer
uses it.
gdb/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
(target_decr_pc_after_break): Delete declaration.
* target.c (default_target_decr_pc_after_break)
(target_decr_pc_after_break): Delete.
* linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
* linux-thread-db.c (check_event): Likewise.
* infrun.c (adjust_pc_after_break): Likewise.
* darwin-nat.c (cancel_breakpoint): Likewise.
* aix-thread.c (aix_thread_wait): Likewise.
* target-delegates.c: Regenerate.
Add a struct to describe the branch trace configuration and use it for
enabling branch tracing.
The user will be able to set configuration fields for each tracing format
to be used for new threads.
The actual configuration that is active for a given thread will be shown
in the "info record" command.
At the moment, the configuration struct only contains a format field
that is set to the only available format.
The format is the only configuration option that can not be set via set
commands. It is given as argument to the "record btrace" command when
starting recording.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (XMLFILES): Add btrace-conf.dtd.
* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
(x86_linux_btrace_conf): New.
(x86_linux_create_target): Initialize to_btrace_conf.
* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
Check format. Split into this and ...
(linux_enable_bts): ... this.
(linux_btrace_conf): New.
(perf_event_skip_record): Renamed into ...
(perf_event_skip_bts_record): ... this. Updated users.
(linux_disable_btrace): Split into this and ...
(linux_disable_bts): ... this.
(linux_read_btrace): Check format.
* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
(linux_btrace_conf): New.
(btrace_target_info)<ptid>: Moved.
(btrace_target_info)<conf>: New.
(btrace_target_info): Split into this and ...
(btrace_tinfo_bts): ... this. Updated users.
* btrace.c (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
(btrace_conf_children, btrace_conf_attributes)
(btrace_conf_elements): New.
* btrace.h (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf): New.
* common/btrace-common.h (btrace_config): New.
* feature/btrace-conf.dtd: New.
* record-btrace.c (record_btrace_conf): New.
(record_btrace_cmdlist): New.
(record_btrace_enable_warn, record_btrace_open): Pass
&record_btrace_conf.
(record_btrace_info): Print recording format.
(cmd_record_btrace_bts_start): New.
(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
(_initialize_record_btrace): Add "record btrace bts" subcommand.
Add "record bts" alias command.
* remote.c (remote_state)<btrace_config>: New.
(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
(remote_protocol_features): Add qXfer:btrace-conf:read.
(remote_open_1): Call remote_btrace_reset.
(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
(btrace_target_info)<conf>: New.
(btrace_sync_conf, btrace_read_config): New.
(remote_enable_btrace): Update parameters. Call btrace_sync_conf and
btrace_read_conf.
(remote_btrace_conf): New.
(init_remote_ops): Initialize to_btrace_conf.
(_initialize_remote): Add qXfer:btrace-conf packet.
* target.c (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
* target.h (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
(target_ops)<to_enable_btrace>: Update parameters and comment.
(target_ops)<to_btrace_conf>: New.
* target-delegates: Regenerate.
* target-debug.h (target_debug_print_const_struct_btrace_config_p)
(target_debug_print_const_struct_btrace_target_info_p): New.
NEWS: Announce new command and new packet.
doc/
* gdb.texinfo (Process Record and Replay): Describe the "record
btrace bts" command.
(General Query Packets): Describe qXfer:btrace-conf:read packet.
(Branch Trace Configuration Format): New.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Update parameters.
(linux_low_btrace_conf): New.
(linux_target_ops)<to_btrace_conf>: Initialize.
* server.c (current_btrace_conf): New.
(handle_btrace_enable): Rename to ...
(handle_btrace_enable_bts): ... this. Pass ¤t_btrace_conf
to target_enable_btrace. Update comment. Update users.
(handle_qxfer_btrace_conf): New.
(qxfer_packets): Add btrace-conf entry.
(handle_query): Report qXfer:btrace-conf:read as supported packet.
* target.h (target_ops)<enable_btrace>: Update parameters and comment.
(target_ops)<read_btrace_conf>: New.
(target_enable_btrace): Update parameters.
(target_read_btrace_conf): New.
testsuite/
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
Add a format argument to the various supports_btrace functions to check
for support of a specific btrace format. This is to prepare for a new
format.
Removed two redundant calls. The check will be made in the subsequent
btrace_enable call.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
* record-btrace.c (record_btrace_open): Remove call to
target_supports_btrace.
* remote.c (remote_supports_btrace): Update parameters.
* target.c (target_supports_btrace): Update parameters.
* target.h (to_supports_btrace, target_supports_btrace): Update
parameters.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_btrace_format): New.
* nat/linux-btrace.c
(kernel_supports_btrace): Rename into ...
(kernel_supports_bts): ... this. Update users. Update warning text.
(intel_supports_btrace): Rename into ...
(intel_supports_bts): ... this. Update users.
(cpu_supports_btrace): Rename into ...
(cpu_supports_bts): ... this. Update users.
(linux_supports_btrace): Update parameters. Split into this and ...
(linux_supports_bts): ... this.
* nat/linux-btrace.h (linux_supports_btrace): Update parameters.
gdbserver/
* server.c (handle_btrace_general_set): Remove call to
target_supports_btrace.
(supported_btrace_packets): New.
(handle_query): Call supported_btrace_packets.
* target.h: include btrace-common.h.
(btrace_target_info): Removed.
(supports_btrace, target_supports_btrace): Update parameters.
Pedro Alves
Don Breazeal
Tom Tromey
Trevor Saunders
Yao Qi
Joel Brobecker
Simon Marchi
Simon Marchi
Markus Metzger
Patrick Palka
Gary Benson
Jan Kratochvil