* config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE,
REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host,
is big-endian and if registers are 32 bits.
* mips-tdep.c (mips_print_register, mips_extract_return_value,
mips_store_return_value): Fix floating-point word-order problems on
little-endian targets introduced by changes of Mar 21.
New UnixWare 2.1 configuration
* config/i386/i386v42mp.mt: new
* config/i386/i386v42mp.mh: new
* config/i386/tm-i386v42mp.h: new
* config/i386/nm-i386v42mp.h: new
* configure.tgt: added new entries
* configure.host: added new entries
* configure, configure.in: Allow gdbserver to be configured
for cross-target environments.
* gdbserver/Makefile.in: Add simulator support.
* gdbserver/configure.in: Eliminate assumption that host == target.
Simplify using gdb/configure.tgt and gdb/configure.host.
Fix other minor configuration errors.
* gdbserver/low-sparc.c: Fix compile error.
* gdbserver/remote-utils.c: Eliminate assumption that registers
and addresses are four bytes. Fix minor compile errors and warnings.
* gdbserver/server.c: Rewrite numerous instances of identical code
for starting inferior processes to call new function start_inferior.
Eliminate assumption that registers and addresses are four bytes.
* gdbserver/server.h: Add missing prototypes to eliminate compiler
warnings.
* gdbserver/low-sim.c: New file to mate gdbserver with simulators.
* config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
* config/i386/linux.mh: Eliminate gdbserver support as a first step
in moving such support from host to target makefile fragments.
* config/i386/linux.mt: Move gdbserver support here from linux.mh.
be two byte aligned. Round argument sizes up to two byte boundary.
Write out args in two byte hunks.
(mn10200_push_return_address): Implement.
* config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
structures > 8 bytes (temporary).
(STORE_RETURN_VALUE): Likewise.
(CALL_DUMMY): No longer undefine.
(USE_STRUCT_CONVENTION): Use for args > 8 bytes.
(REG_STRUCT_HAS_ADDR): Define.
Inferior function calls for the mn10200.
comments, formatting, etc. Plus other minor fixes for problems
I found during my first pass over the mn10200 port.
(mn10200_analyze_prologue): New function.
(mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
* config/mn10200/tm-mn10200.h: Lots of updates/improvements to
comments, formatting, etc. Minor fixes for problems I found during
my first pass over the mn10200 port.
(TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
pointers.
(REGISTER_VIRTUAL_TYPE): Define as a long.
(EXTRACT_RETURN_VALUE): Rework to deal with long ints living
in register pairs.
(STORE_RETURN_VALUE): Similarly.
Checking in my initial changes, prologue scanning, etc.
Current gdb testsuite results:
=== gdb Summary ===
# of expected passes 3684
# of expected failures 40
# of unexpected failures 6
* config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
(ABOUT_TO_RETURN): Call new function mips_about_to_return.
(mips_breakpoint_from_pc, mips_about_to_return): Declare.
* mem-break.c (memory_breakpoint_from_pc): New function.
(memory_insert_breakpoint, memory_remove_breakpoint): Use
memory_breakpoint_from_pc to determine breakpoint contents and size.
* target.h (memory_breakpoint_from_pc): Declare.
* monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
to determine size of breakpoint instruction.
* mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
New helper functions for mips_find_saved_regs.
(mips_find_saved_regs): Recognize mips16 prologues.
(mips_addr_bits_remove): Strip off upper 32 bits of address
when target CPU is 32 bits but CORE_ADDR is 64 bits.
(mips_step_skips_delay): No branch delay slot on mips16.
(gdb_print_insn_mips): Disassemble mips16 code.
(mips_breakpoint_from_pc, mips_about_to_return): New functions.
(REGISTER_NAMES): Elimination registers not found on the mn10200.
(PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
(LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200.
Start mn10200 gdb port by adding copies of mn10300
target-specific files with all instances of mn10300 changed
to mn10200 to start with.
* mn10200-tdep.c: new
* config/mn10200/tm-mn10200.h: new, REGISTER_SIZE is 24 bits not 32,
SP_REGNUM and FP_REGNUM are different, also no lar or lir.
* config/mn10200/mn10200.mt: new
* mn10300-tdep.c: wrote/fixed implementations of
mn10300_frame_chain, mn10300_init_extra_frame_info,
mn10300_frame_saved_pc
* config/mn10300/tm-mn10300.h: redefine INIT_EXTRA_FRAME_INFO
and INIT_FRAME_PC macros
Backtracing starting to work correctly.
* mn10300-tdep.c: made a lot more generic, ripping out code
from copied target (no more mn10300_scan_prologue,
init_extra_frame_info, and mn10300_fix_call_dummy calls)
* config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
and INIT_FRAME_PC macros
ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
and CONFIG_OBS.
* configure configure.in: Clean up test cases around thread support.
start-sanitize-v850
* configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
host is Windows.
end-sanitize-v850
* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
printcmd.c valops.c value.h values.c: Add bfd_section arg to
value_at and value_at_lazy.
* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
Add bfd_section arg to prim_record_minimal_symbol_and_info.
* corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
instead of read_memory. It takes a bfd_section arg.
* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
unnecessary cast for assignment of struct dbx_symfile_info.
Struct objfile now uses a real pointer instead of PTR for this
element.
* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
text, data and bss into dbx_symfile_info.
* exec.c (xfer_memory): Handle transfers for user-specified
sections.
* findvar.c (read_var_value locate_var_value): Copy bfd section
from the symbol to the value.
* gdb-stabs.h: Add section pointers for text, data and bss
sections.
* maint.c (translate address command): Add test code for overlay
address translation.
* printcmd.c (do_examine do_one_display): Now takes a bfd section
arg.
* (print_formatted x_command): Record current section along with
current address for repeated commands.
* sparc-nat.c (fetch_inferior_registers): Change
target_xfer_memory to target_{read write}_memory to allow changes
to target_xfer_memory interface for section info.
* symmisc.c (dump_msymbols print_symbol): Print section
assocaited with symbol.
* symtab.c (fixup_symbol_section): New routine to
add section info to symbols returned by lookup_symbol.
* symtab.h (struct general_symbol_info): Add bfd section to
symbols.
* target.c target.h (target_xfer_memory): Add bfd section to
args.
* (target_read_memory_section): New routine to read data from a
specific section.
* (target_memory_bfd_section): New global variable to pass bfd
section in to targets.
* valarith.c (value_add value_addr value_array): Preserve bfd
section when computing new value.
* value.h (struct value): Add bfd section to values.
* values.c (allocate_value value_copy): Initialize/preserve bfd
section.
* (unpack_double): Clean up _MSC_VER conditionals to remove
duplicate code.
start-sanitize-v850
* v850ice.c: New module to support communication with NEC's
PC-based ICE.
* config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
ep names with rxx names. sp and fp are renamed via a different
mechanism.
end-sanitize-v850
* mn10300-tdep.c (mn10300_push_arguments): rewrote
also removed code elsewhere that made use of RP_REGNUM
* config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE
with separate LITTLE_BREAKPOINT and BIG_BREAKPOINT definitions;
this fixes problem with setting breakpoints in little-endian
programs in the simulator.
of 64-bit values on Windows.
* config/i386/xm-windows.h: Leave CC_HAS_LONG_LONG defined,
undefine PRINTF_HAS_LONG_LONG, so that 64-bit values will
be printed without loss of upper bits.
* sparclet-stub.c: a few clean-ups, removing dead code
* config/sparc/tm-sparclet.h: make registers ASR15, ASR19 invisible
(they're not useful, you can't change, write or even read them)
* sparclet-rom.c: Remove includes of Unix system files.
Add function "sparclet_supply_register" so that parse_register_dump
will not seg-fault by calling a null function pointer.
Remove XMODEM support (unfinished work?).
Remove flag "MO_HANDLE_NL", so monitor's output can be read by humans.
Add fill command.
Remove colon from getreg.resp_delim so PSR register will work.
Remove pointer to sparclet_load (downloading SREC's doesn't work).
Null out local register names for %g0, all %cc and all %asr regs,
since the monitor can't report them. Will return zero instead.
* sparclet-stub.c: New -- remote protocol support for sparclet CPU.
* config/sparc/tm-sparclet.h: Re-arrange REGISTER_NAMES:
Add back %g0 and %psr, add %cc coprocessor regs, add %asr regs.
Adjust NUM_REGS and REGISTER_BYTES accordingly
