target_has_stack.
* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
when there is no thread selected.
(mi_cmd_execute): Don't special case commands that can run without
a valid selected thread.
* top.c (execute_command): Don't special case commands that can
run without a valid selected thread. Use has_stack_frames.
* infcmd.c (ensure_valid_thread): New.
(continue_1, step_1, jump_command, signal_command): Use it.
(detach_command): Error out if there's no selected thread/inferior.
* thread.c (print_thread_info): Allow having no thread selected.
(switch_to_thread): Don't read the PC if there is no current thread.
(do_restore_current_thread_cleanup): Don't record the current
frame if there is no current thread.
(make_cleanup_restore_current_thread): Don't read frame info if
there is no selected thread.
(_initialize_thread): Don't mark commands as
"no_selected_thread_ok".
* frame.c (get_current_frame): Error out if there is no valid
selected thread.
(has_stack_frames): Return false if there is no valid
selected thread.
* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
"no_selected_thread_ok".
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): Delete.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Delete declaration.
* stack.c (get_selected_block): Use has_stack_frames.
* infcmd.c (notice_new_inferior): New.
* remote.c (remote_add_inferior, remote_add_thread): New.
(notice_new_inferiors): Rename to...
(remote_notice_new_inferior): ... this. Add RUNNING argument.
Use remote_add_thread instead of add_thread, passing it the
RUNNING argument. Add an inferior with remote_add_inferior. If
we just learned about an inferior, call notice_new_inferior.
(record_currthread): Adjust.
(remote_threads_info): Adjust to use remote_notice_new_inferior.
(remote_start_remote, extended_remote_attach_1): Use remote_add_inferior.
(process_stop_reply): Adjust. Call remote_notice_new_inferior
after handling expedited registers and watchpoint state.
(extended_remote_create_inferior_1): Use remote_add_inferior.
* ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
* infcmd.c (finish_command_continuation): Pass '1' for
'print_frame' parameter to the observer.
* infrun.c (normal_stop): Don't print mi-specific information
here. Pass 'stop_print_frame' to the 'print_frame' parameter
of the observer.
* mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
If we need to print frame, and current uiout is not the MI one,
print frame again.
* infcmd.c (signal_command): Do not specify a resume PC.
testsuite/
PR gdb/9346
* gdb.base/interrupt.c (sigint_handler): New.
(main): Install a SIGINT handler if SIGNALS is defined. Exit
on error.
* gdb.base/interrupt.exp: Define SIGNALS unless gdb,nosignals.
Test "signal SIGINT".
* gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
Declare.
* thread.c (finish_thread_state, finish_thread_state_cleanup): New.
* infrun.c (wait_for_inferior, fetch_inferior_event): If an error
is thrown while handling an event, finish the thread state.
(normal_stop): Use finish_thread_state cleanup.
* infcmd.c (run_command_1): If an error is thrown while starting
the inferior, finish the thread state.
(do_all_inferior_continuations)
(discard_all_inferior_continuations): Declare.
* utils.c (add_inferior_continuation)
(do_all_inferior_continuations)
(discard_all_inferior_continuations): New.
* inferior.h (struct inferior) <continuations>: New field.
* inferior.c (free_inferior): Discard all the inferior
continuations.
* inf-loop.c (inferior_event_handler): Do all current inferior
continuations.
* infcmd.c (attach_command): Register an inferior continuation
instead of a thread continuation.
* infrun.c (handle_inferior_event): If stop_soon is
STOP_QUIETLY_NO_SIGSTOP, also expect a TARGET_SIGNAL_0.
fetch libraries and insert breakpoints after connecting.
* infcmd.c (post_create_inferior): If the solist is shared between
inferiors, no need to refetch it on every new inferior.
(detach_command): If the shared library list is shared between
inferiors, then don't clear it on every inferior detach.
* gdbarch.sh (has_global_solist): New.
* i386-dicos-tdep.c (i386_dicos_init_abi): Set
gdbarch_has_global_solist.
* target.c (target_pre_inferior): If the shared library list is
shared between inferiors, then don't clear it here, neither
invalidate the memory regions or clear the target description.
(target_detach): If the shared library list is shared between
inferiors, then don't remove breakpoints from the target here.
(target_disconnect): Comment.
* solib.c (update_solib_list): Check for null_ptid.
* breakpoint.c (insert_breakpoints, update_global_location_list):
If the shared library list is shared between inferiors, insert
breakpoints even if there's no execution.
(breakpoint_init_inferior): If the shared library list is shared
between inferiors, don't delete breakpoints or mark them
uninserted here.
* gdbarch.c, gdbarch.h: Regenerate.
field.
(target_supports_multi_process): New define.
* target.c (update_current_target): Inherit and de_fault
to_supports_multi_process.
* infcmd.c (attach_command): Allow attaching to multiple processes
if the target supports it.
(detach_command): If the target claims there is still execution,
don't clear the thread list.
* remote.c (remote_supports_multi_process): New.
(init_remote_ops): Register remote_supports_multi_process.
* remote.c (pending_stop_reply): New.
(struct remote_state) <non_stop_aware, support_vCont_t>: New
fields.
(remote_async_inferior_event_token)
(remote_async_get_pending_events_token): New.
(notice_new_inferiors): New, abstracted out from record_currthread.
(record_currthread): Call it.
(remote_threads_info): Default threads to running in non-stop
mode. In non-stop mode, only qfThreadInfo is supported.
(remote_close): Discard all pending stop_replies. Close the event
sources.
(set_stop_requested_callback): New.
(remote_start_remote): Implement non-stop mode startup. In
all-stop, don't clear the thread list here.
(remote_non_stop_feature): New.
(remote_protocol_features): Add a "QNonStop" feature.
(remote_open_1): Clear cached_wait_status and non_stop_aware.
Clear the thread list here.
(remote_detach_1): Discard pending stop replies of the process we
detached from.
(extended_remote_attach_1): Implement non-stop mode.
(remote_vcont_probe): Recognize `vCont;t'.
(remote_vcont_resume): Implement non-stop mode.
(remote_resume): Don't set waiting_for_stop_reply in non-stop
mode.
(remote_stop_ns): New.
(remote_stop): Rename to ...
(remote_stop_as): ... this. If we have a cached wait status,
don't bother interrupting the remote.
(remote_stop): Reimplement as wrapper around remote_stop_as and
remote_stop_ns.
(interrupt_query): Don't query in async mode.
(struct cached_reg, cahed_reg_t): New.
(struct stop_reply): New.
(stop_reply_queue): New.
(stop_reply_xmalloc, stop_reply_xfree)
(discard_pending_stop_replies, do_stop_reply_xfree)
(queued_stop_reply, push_stop_reply, peek_stop_reply)
(remote_parse_stop_reply, remote_get_pending_stop_replies)
(process_stop_reply): New.
(remote_wait_ns): New.
(remote_wait_as): Use remote_parse_stop_reply. Invalidate the
notion of current general thread is a process exit was reported.
(remote_wait): Call remote_wait_ns in non-stop mode.
(handle_notification): New.
(putpkt_binary): Handle notifications. Don't care for
waiting_for_stop_reply in non-stop mode.
(getpkt_sane): Rename to ...
(getpkt_or_notif_sane_1): ... this. Add `expecting_notif'
argument. Handle it. Handle notifications.
(getpkt_sane): Reimplement as wrapper around getpkt_or_notif_sane_1.
(getpkt_or_notif_sane): New.
(select_new_thread_callback): Check for exited state instead of
comparing the ptid against minus_one_ptid.
(extended_remote_create_inferior_1): Query the remote about the
current thread.
(remote_supports_non_stop): New.
(init_remote_ops): Register it.
(remote_async_inferior_event_handler): New.
(remote_async_get_pending_events_handler): New.
* infcmd.c (proceed_thread_callback): Comment.
(proceed_after_attach_callback, proceed_after_attach): New.
(attach_command_post_wait): In background attach, resume all
threads, but only if they are unsignalled, and not explicitly
stopped. In foreground attach, in non-stop mode, make sure to
stop all threads of the just attached to process.
(attach_command): In non-stop mode: If doing a background attach,
stop at least one thread. If a foreground attach, stop all
threads.
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* defs.h: Mention ptid_is_pid.
* inferior.h (ptid_is_pid): Declare.
* gdbthread.h (struct thread_info) <stop_requested>: New field.
(set_stop_requested): Declare.
* infcmd.c (interrupt_target_1): Call set_stop_requested.
* infrun.c (clear_proceed_status): Clear stop_requested.
(infrun_thread_stop_requested_callback,
infrun_thread_stop_requested): New.
(handle_inferior_event): If a TARGET_SIGNAL_TRAP is reported on a
thread that had an explicit stop request, pretend we got a
TARGET_SIGNAL_0. Always stop if the thread had an explicit stop
request.
(print_stop_reason): In the SIGNAL_RECEIVED case, if we're not
outputting to MI, and we got a TARGET_SIGNAL_0, print "# Stopped",
instead of mentioning signal 0.
(ptid_is_pid): New.
* thread.c (set_stop_requested): New.
* linux-nat.c (queued_waitpid): Rename to ...
(queued_waitpid_1): ... this. Add `peek' argument. Handle it.
(queued_waitpid): New, as wrapper to queued_waitpid_1.
(push_waitpid): Push the SIGTRAP to the local event queue, to the
kernel's.
(send_sigint_callback): Delete.
(linux_nat_stop_lwp): New.
(linux_nat_stop): Use it.
gdb/doc/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* observer.texi (thread_stop_requested): New.
gdb/testsuite/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* lib/mi-support.exp (mi_expect_interrupt): Expect signal 0
instead of SIGINT.
Target interface for reverse debugging.
* target.h (enum target_waitkind):
Add new wait event, TARGET_WAITKIND_NO_HISTORY.
(struct target_ops): New method to_can_execute_reverse.
(target_can_execute_reverse): New macro.
* target.c (update_current_target): Inherit to_can_execute_reverse.
Remote interface for reverse debugging.
* remote.c (remote_can_execute_reverse): New target method.
(remote_resume): Check for reverse exec direction, and send
appropriate command to target.
(remote_wait_as): Check target response for NO_HISTORY status.
Also check for empty reply (target doesn't understand "bs" or "bc).
(remote_vcont_resume): Jump out if attempting reverse execution.
Event handling interface for reverse debugging.
* infrun.c (execution_direction): New state variable.
(enum inferior_stop_reason): Add NO_HISTORY reason.
(handle_inferior_event): Handle TARGET_WAITKIND_NO_HISTORY.
Handle stepping over a function call in reverse.
Handle stepping thru a line range in reverse.
Handle setting a step-resume breakpoint in reverse.
Handle stepping into a function in reverse.
Handle stepping between line ranges in reverse.
(print_stop_reason): Print reason for NO_HISTORY.
(step_into_function): Rename to handle_step_into_function.
(handle_step_into_function_backward): New function.
(set_exec_direction_func, show_exec_direction_func): New funcs.
(proceed): No need to singlestep over a breakpoint
when resuming in reverse.
* inferior.h (enum exec_direction_kind): New enum.
(execution_direction): Export new execution state variable.
* breakpoint.c (make_breakpoint_silent): New function.
* breakpoint.h (make_breakpoint_silent): Export.
* infcmd.c (finish_command): Check for reverse exec direction.
(finish_backward): New function, handle finish cmd in reverse.
User interface for reverse execution.
* Makefile.in (reverse.c): New file.
* reverse.c: New file. User interface for reverse execution.
directly instead of calling wait_for_inferior / resume.
* infcmd.c (kill_if_already_running): Do not call no_shared_libraries
or init_wait_for_inferior.
(run_command_1): Call init_wait_for_inferior.
* infrun.c (context_switch): Don't save and load infrun state.
(context_switch_to): Delete.
* infcmd.c (proceed_thread_callback): Replace context_switch_to
calls by switch_to_thread calls.
* gdbthread.h (save_infrun_state, load_infrun_state): Delete.
* thread.c (main_thread_state, main_thread_executing): Delete.
(inferior_thread): Delete references to them.
(add_thread_silent): Fix case where we're adding a thread with the
same ptid as an exited thread. Remove references to
context-switching.
(load_infrun_state, save_infrun_state): Delete.
(thread_alive, is_thread_state, any_running, is_executing)
(set_executing): Remove the special handling for targets that
don't register any thread.
(restore_current_thread, thread_apply_all_command)
(do_captured_thread_select): Unconditionally call
switch_to_thread.
* mi/mi-main.c (mi_cmd_execute): Check for exited threads.
Call switch_to_thread instead of context_switch_to.
continuations.
* gdbthread.h (struct thread_info): Add comments around
continuations and intermediate_continuations.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments.
* infrun.c (fetch_inferior_event): Only call normal_stop if
stop_soon is NO_STOP_QUIETLY.
(context_switch): Don't context-switch the continuations.
* thread.c (clear_thread_inferior_resources): Discard all
continuations of the thread we're clearing.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments, and the code referencing
them.
* utils.c: Include "gdbthread.h".
(cmd_continuation, intermediate_continuation): Delete.
(add_continuation): Add thread_info* argument. Install the
continuation on it.
(restore_thread_cleanup): New.
(do_all_continuations_ptid, do_all_continuations_thread_callback):
New.
(do_all_continuations): Reimplement.
(discard_all_continuations_thread_callback,
discard_all_continuations_thread): New.
(discard_all_continuations): Reimplement.
(add_intermediate_continuation): Add thread_info* argument.
Install the continuation on it.
(do_all_intermediate_continuations_thread_callback)
(do_all_intermediate_continuations_thread): New.
(do_all_intermediate_continuations): Reimplement.
(discard_all_intermediate_continuations_thread_callback): New.
(discard_all_intermediate_continuations_thread): New.
(discard_all_intermediate_continuations): Reimplement.
* breakpoint.c (until_break_command): Install the continuation on
the current thread.
* defs.h (cmd_continuation, intermediate_continuation): Delete.
(struct thread_info): Forward declare.
(add_continuation, add_intermediate_continuation): Add
thread_info* argument.
(do_all_continuations_thread, discard_all_continuations_thread)
(do_all_intermediate_continuations_thread)
(discard_all_intermediate_continuations_thread): Declare.
* inf-loop.c (inferior_event_handler): In non-stop only run
continuations on the thread that stopped. In all-stop, run
continuations on all threads.
* infcmd.c (step_once, finish_command): Adjust.
* breakpoint.h (bpstat_do_actions): Remove bpstat* argument.
* breakpoint.c (bpstat_do_actions): Rename to ...
(bpstat_do_actions_1): ... this. Make static. Change return type
to int. Return true if a breakpoint proceeded.
(bpstat_do_actions): New, as wrapper around bpstat_do_actions_1.
(delete_breakpoint): Don't reference the global stop_bpstat; it's
gone.
* gdbthread.h (struct thread_info): Add stop_bpstat.
(save_infrun_state, load_infrun_state): Remove stop_bpstat
argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_bpstat argument, and the code referencing it.
* infcall.c: Include "gdbthread.h".
(call_function_by_hand): Adjust.
* exceptions.c: Include "gdbthread.h".
(throw_exception): Adjust.
* infcmd.c (stop_bpstat): Delete.
(continue_command): In all-stop, set the ignore count on the
thread that reported the stop. In non-stop, set it on the current
thread.
(finish_command_continuation): Adjust.
(program_info): Adjust.
* infrun.c (clear_proceed_status): Adjust.
(context_switch): Don't context-switch stop_bpstat.
(handle_inferior_event): Adjust.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* inf-loop.c (inferior_event_handler): Remove parameter to
bpstat_do_actions call.
* top.c (command_loop): Remove parameter to bpstat_do_actions
call. Call it unconditionally.
* event-top.c (command_handler): Ditto.
* python/python.c (execute_gdb_command): Ditto.
(frame_map_name_to_regnum): Remove prototype.
* frame.c (frame_map_regnum_to_name): Remove.
(frame_map_name_to_regnum): Remove.
(frame_unwind_register_value): Use user_reg_map_regnum_to_name
instead of frame_map_regnum_to_name.
* ax-gdb.c: Include "user-regs.h".
(gen_expr): Use user_reg_map_name_to_regnum instead of
frame_map_name_to_regnum.
* eval.c: Include "user-regs.h".
(evaluate_subexp_standard): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* infcmd.c (registers_info): Likewise.
* parse.c: Include "user-regs.h".
(write_dollar_variable): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* tracepoint.c: Include "user-regs.h".
(encode_actions): Use user_reg_map_name_to_regnum
instead of frame_map_name_to_regnum.
* valops.c: Include "user-regs.h".
(value_fetch_lazy): Use user_reg_map_regnum_to_name instead
of frame_map_regnum_to_name.
(target_pre_inferior): Call no_shared_libraries.
* infcmd.c (run_command_1): Do not call objfile_purge_solibs
or clear_solib.
(attach_command): Do not call clear_solib.
Rewrite continuations internals on top of cleanups and plug
continuation arguments leaks.
* defs.h (struct continuation): Make it opaque.
(add_continuation, add_intermediate_continuation): Drop the int
argument of the continuation hook argument. Add
continuation_free_args argument.
(do_all_continuations, do_all_intermediate_continuations): Drop
the error_p argument.
* utils.c (add_continuation): Drop the int argument of the
continuation hook argument. Add continuation_free_args argument.
Reimplement on top of cleanups.
(do_all_continuations): Drop error argument. Reimplement on top
of cleanups.
(discard_all_continuations): Reimplement on top of cleanups.
(add_intermediate_continuation): Drop the int argument of the
continuation hook argument. Add continuation_free_args argument.
Reimplement on top of cleanups.
(do_all_intermediate_continuations): Drop error argument.
Reimplement on top of cleanups.
(discard_all_intermediate_continuations): Reimplement on top of
cleanups.
* breakpoint.c (until_break_command_continuation): Drop error
argument. Add xfree as continuation argument deleter.
* inf-loop.c (inferior_event_handler): On error, discard all
continuations. Adjust to new do_all_intermediate_continuations
and do_all_continuations interfaces.
* infcmd.c (step_1_continuation): Drop error_p argument. Adjust.
Pass xfree as continuation argument deleter.
(finish_command_continuation): Drop error_p argument. Adjust.
(finish_command_continuation_free_arg): New.
(finish_command): Pass finish_command_continuation_free_arg as
continuation argument deleter. Adjust to new do_all_continuations
interfaces.
(attach_command_continuation): Drop error_p argument.
(attach_command_continuation_free_args): New.
(attach_command): Pass attach_command_continuation_free_args as
continuation argument deleter.
* interps.c (interp_set): Adjust to new do_all_continuations
interfaces.
* event-top.c (stdin_event_handler): In error, also discard the
intermediate continuations.
* top.c (execute_command): Remove unused arg1 and arg2 locals.
* breakpoint.c (struct until_break_command_continuation_args):
New.
(until_break_command_continuation): Take a void* instead of a
continuations_arg. Adjust.
(until_break_command): Adjust to use struct
until_break_command_continuation_args instead of struct
continuation_arg.
* infcmd.c (struct step_1_continuation_args): New.
(step_1_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct step_1_continuation_args.
(step_once): Adjust to use struct step_1_continuation_args.
(struct finish_command_continuation_args): New.
(finish_command_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct
finish_command_continuation_args.
(finish_command): Adjust to use struct
finish_command_continuation_args.
(struct attach_command_continuation_args): New.
(attach_command_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct
attach_command_continuation_args.
(attach_command): Adjust to use struct
attach_command_continuation_args.
* defs.h (struct continuation_arg): Delete.
(struct continuation): Replace the struct continuation_arg*
parameter of continuation_hook by a void*. Replace "arg_list"
member by a new "args" member with void* type.
(add_continuation, add_intermediate_continuation): Replace struct
continuation_arg type usages by void* usages.
* utils.c (add_continuation, do_all_continuations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): Replace struct
continuation_arg type usages by void* usages. Pass "args" instead
of "arg_list".
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
* infcmd.c (proceed_thread_callback, do_context_switch_to): New.
(continue_command): Add "-a" option.
(interrupt_target_command): Add "-a" option.
(_initialize_infcmd): Add extend help of continue and interrupt
command to mention the new "-a" option. Mark "continue" async ok.
* infrun.c (resume): In non-stop mode, always resume just one
thread.
(proceed): Don't call prepare_to_proceed in non-stop mode.
(fetch_inferior_event): In non-stop mode, switch context before
handling the event.
(error_is_running, ensure_not_running): New.
(handle_inferior_event): In non-stop mode: Mark only the event
thread as stopped. Require that the target module manages adding
threads to the thread list. Assert that there isn't a
deferred_step_ptid set. Don't switch to infwait_thread_hop_state.
(normal_stop): Only mark not-running if inferior hasn't exited.
In non-stop mode, only mark the event thread.
* thread.c:Include "cli/cli-decode.h".
(print_thread_info): Don't read from a running thread.
Output "(running)" if thread is running.
(switch_to_thread): Don't read stop_pc if thread is executing.
(do_restore_current_thread_cleanup): Don't write to a running
thread.
(thread_apply_all_command): Don't read from a running thread. In
non-stop mode, do a full context-switch instead of just switching
threads.
(thread_apply_command): In non-stop mode, do a full context-switch
instead of just switching threads.
(do_captured_thread_select): Likewise. Inform user if selected
thread is running.
(_initialize_thread): Mark "info threads" and "thread" and
async_ok.
* inf-loop.c (inferior_event_handler): In non-stop mode, don't
unregister the target from the event loop.
* infcmd.c (continue_command, step_1, jump_command)
(signal_command): Ensure the selected thread isn't running.
(interrupt_target_command): In non-stop mode, interrupt only the
selected thread.
* inferior.h (error_is_running, ensure_not_running): Declare.
* target.h (struct target_ops): Add ptid argument to the to_stop
member.
(target_stop): Add ptid_t argument.
* target.c (update_current_target): Add ptid argument to to_stop's
type.
(debug_to_stop): Add ptid_t argument.
(debug_to_rcmd): Set to_stop_ptid.
* remote.c (remote_stop): Add ptid_t argument.
(async_remote_interrupt): Add inferior_ptid to target_stop.
* inf-ptrace.c (inf_ptrace_stop): Add ptid argument.
* Makefile.in (thread.o): Depend on $(cli_decode_h).
