(gld_xxx_recognized_file): Use pep_bfd_is_dll for detection of shared objects.
* pe-dll.c: (autofilter_symbollist_i386): Define set for amd64 mingw target.
* ldlang.c (lang_insert_orphan): When searching through linker
script to place an orphan, don't stop on statements that appear
outside of SECTIONS.
* emultempl/elf32.em (output_rel_find): Prefer read-only alloc
sections over read/write alloc sections.
ld/testsuite/
* ld-elf/weak-dyn-1.rd: Adjust.
* ld.texinfo (--heap): Replace 'amount' with 'number of bytes'.
(--stack): Likewise.
2007-07-03 Matthias Klose <doko@ubuntu.com>
* emultempl/spuelf.em (base_name): Correct backslash quoting.
2007-07-02 Alan Modra <amodra@bigpond.net.au>
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* po/ld.pot: Regenerate.
2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
* aclocal.m4: Regenerated.
* Makefile.in: Likewise.
2007-06-29 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Remove a line with '*' only.
2007-06-29 Joseph Myers <joseph@codesourcery.com>
* emulparams/armelf.sh (OTHER_SECTIONS): Remove .ARM.attributes.
(ATTRS_SECTIONS): Define.
* scripttempl/elf.sc, scripttempl/elf32sh-symbian.sc,
scripttempl/elf_chaos.sc, scripttempl/elfi370.sc,
scripttempl/elfxtensa.sc: Handle ATTRS_SECTIONS.
2006-06-29 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
* scripttemp/elf32cr16.sc: Default linker script.
* emulparams/elf32cr16.sh: Emulation script.
* emultempl/cr16elf.em: Emulation script.
* Makefile.am: Add entry to make cr16 target.
* Makefile.in: Regenerate.
* configure.tgt: Specify default and other emulation parameters
for cr16.
* ChangeLog: Added CR16 target entry.
* NEWS: Announce the support for the CR16 new target.
2007-06-27 Alan Modra <amodra@bigpond.net.au>
* pe-dll.c: Rename uses of bfd.next to bfd.archive_next throughout.
2007-06-20 Alan Modra <amodra@bigpond.net.au>
* emulparams/elf32_spu.sh (OTHER_SECTIONS): KEEP .note.spu_name.
2007-06-18 Nathan Sidwell <nathan@codesourcery.com>
* ldlex.l, ldgram.y: Add ALIGNOF.
* ldexp.c (exp_print_token, foldname): Likewise.
* ld.texinfo: Likewise.
2007-06-18 Alan Modra <amodra@bigpond.net.au>
* Makefile.am: Add eelf32_spu.o rule.
* Makefile.in: Regenerate.
* emultempl/spuelf.em: Revert last change. Instead use EMBEDSPU
defined in Makefile for embedspu name.
2007-06-18 Alan Modra <amodra@bigpond.net.au>
* emultempl/spuelf.em (embedded_spu_file): Deduce embedspu program
name prefix from that of ld.
2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
* acinclude.m4: Removed.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
2007-06-14 Alan Modra <amodra@bigpond.net.au>
* emultempl/spu_ovl.S: Don't trash lr on tail call from one
overlay to another.
* emultempl/spu_ovl.o: Regenerate.
2007-06-11 Bob Wilson <bob.wilson@acm.org>
* emulparams/elf32xtensa.sh (OTHER_READONLY_SECTIONS): Add ONLY_IF_RO
for .xt_except_table.
(OTHER_RELRO_SECTIONS): New.
2007-06-11 Sterling Augustine <sterling@tensilica.com>
Bob Wilson <bob.wilson@acm.org>
* emultempl/xtensaelf.em (replace_insn_sec_with_prop_sec): Use renamed
XTENSA_PROP_NO_TRANSFORM flag instead of XTENSA_PROP_INSN_NO_TRANSFORM.
2007-06-01 Noah Misch <noah@cs.caltech.edu>
Alan Modra <amodra@bigpond.net.au>
* ldlang.c (ldlang_add_file): Use input_bfds_tail.
* ldmain.c (main): Init input_bfds_tail. Sort link_info
initialization.
2007-05-29 Alan Modra <amodra@bigpond.net.au>
* emultempl/spuelf.em (base_name): New function, split out from..
(embedded_spu_file) ..here. Pass -fPIC or -fpie to embedspu
invocation if we deduce a shared lib or position independent
executable build by looking at ctrbegin* linker input files.
2007-05-29 Alan Modra <amodra@bigpond.net.au>
* emultempl/spu_ovl.S (__rv_pattern, __cg_pattern): Set symbol
types and sizes.
* emultempl/spu_ovl.o: Regenerate.
2007-05-24 Steve Ellcey <sje@cup.hp.com>
* Makefile.in: Regnerate.
* configure: Regenerate.
* aclocal.m4: Regenerate.
2007-05-24 Nathan Sidwell <nathan@codesourcery.com>
* ldlex.l: ASSERT is recognized in SCRIPT env. NAMES cannot
contain commas in EXP env.
* ldgram.y (extern_name_list): Push to EXP env, move body to ...
(extern_name_list_body): ... here.
(script_file, ifile_list): Reformat.
(statement): Add ASSERT.
2007-05-22 Nick Clifton <nickc@redhat.com>
* ld.texinfo: Use @copying around the copyright notice.
* ldint.texinfo: Likewise.
2007-05-18 Richard Sandiford <richard@codesourcery.com>
* emulparams/elf32ebmipvxworks.sh (OTHER_READONLY_SECTIONS)
(OTHER_READWRITE_SECTIONS): Define. Add .rdata sections.
2007-05-16 Richard Sandiford <richard@codesourcery.com>
* configure.in: Allow sysroots to be relocated under $prefix as
well as $exec_prefix.
* configure: Regenerate.
2007-05-14 Andreas Schwab <schwab@suse.de>
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_new_vers_pattern):
Handle null pattern.
2007-05-11 Alan Modra <amodra@bigpond.net.au>
* emultempl/ppc32elf.em (plt_style): New variable.
(old_plt): Delete.
(ppc_after_open): Adjust ppc_elf_select_plt_layout call.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_NEW_PLT, renumber
OPTION_OLD_PLT, OPTION_OLD_GOT and OPTION_STUBSYMS.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Add secure-plt.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_NEW_PLT.
* ld.texinfo (--secure-plt): Document.
2007-05-08 Alan Modra <amodra@bigpond.net.au>
* ld.h (args_type, ld_config_type): Reorder fields.
* ldmain.c (main): Don't initialise a bunch of vars we know are
zero already.
2007-05-05 Anatoly Sokolov <aesok@post.ru>
* multempl/avrelf.em (PARSE_AND_LIST_ARGS_CASES): Add new value for
"--pmem-wrap-around".
(PARSE_AND_LIST_OPTIONS): Describe new value for "--pmem-wrap-around".
2007-05-03 Bob Wilson <bob.wilson@acm.org>
* scripttempl/elfxtensa.sc: Merge changes from elf.sc.
2007-05-03 Alan Modra <amodra@bigpond.net.au>
* ld.texinfo (--no-warn-search-mismatch): Document.
* ldfile.c (ldfile_try_open_bfd): Don't warn about skipping
incompatible libraries if --no-warn-search-mismatch.
* ld.h (args_type): Add warn_search_mismatch.
* ldmain.c (main): Init it.
* lexsup.c (enum option_values): Add OPTION_NO_WARN_SEARCH_MISMATCH.
(ld_options): Add entry for --no-warn-search-mismatch.
(parse_args): Handle OPTION_NO_WARN_SEARCH_MISMATCH.
2007-05-03 Alan Modra <amodra@bigpond.net.au>
* scripttempl/elf.sc: Add .debug_pubtypes and .debug_ranges.
2007-05-01 Robert Millan <rmh@aybabtu.com>
* ldlang.c (lang_check): Error on architecture mismatch.
2007-04-30 Alan Modra <amodra@bigpond.net.au>
* ldmain.c (link_callbacks): Init info and minfo fields.
* ldmisc.c (minfo): Do nothing if no map file.
* emultempl/spuelf.em (stack_analysis, emit_stack_syms): New vars.
(spu_after_open): Adjust spu_elf_create_sections call.
(spu_before_allocation): Likewise for spu_elf_size_stubs.
(OPTION_SPU_STACK_ANALYSIS, OPTION_SPU_STACK_SYMS): Define.
(PARSE_AND_LIST_LONGOPTS): Add new entries.
(PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Likewise.
* gen-doc.texi: Add @set for SPU and other missing targets.
* ld.texinfo: Update man page selection to match gen-doc.texi.
Document SPU features.
2007-04-28 Alan Modra <amodra@bigpond.net.au>
* ldcref.c (struct cref_hash_entry): Make "demangled" const.
(cref_fill_array): Adjust for changed demangler.
* ldlang.c (lang_one_common): Likewise.
2007-04-27 Nathan Froyd <froydnj@codesourcery.com>
* emulparams/elf32_sparc.sh: Update comments.
* emulparams/elf32bmip.sh: Likewise.
* emulparams/elf32ppc.sh: Likewise.
* emulparams/vxworks.sh: Likewise.
2007-04-27 Alan Modra <amodra@bigpond.net.au>
Many files: Include sysdep.h first. Remove duplicate headers.
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
2007-04-24 Alan Modra <amodra@bigpond.net.au>
* Makefile.in: Regenerate.
2007-04-19 Alan Modra <amodra@bigpond.net.au>
* ldcref.c (cref_fill_array): Call bfd_demangle rather than demangle.
* ldlang.c (lang_one_common): Likewise.
* ldmisc.c (vfinfo): Likewise.
(demangle): Delete.
* ldmisc.h (demangle): Delete.
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
2007-04-18 Alan Modra <amodra@bigpond.net.au>
* ldlang.h (enum section_type): Add overlay_section.
* ldlang.c (lang_add_section): Handle flags for overlay_section
as per normal_section.
(lang_size_sections_1): When setting lma, detect overlays by
os->sectype rather than by looking for overlapping vmas.
(lang_enter_overlay_section): Use overlay_section type.
(lang_leave_overlay): Set first overlay section to normal.
2007-04-14 Steve Ellcey <sje@cup.hp.com>
* Makefile.am: Add ACLOCAL_AMFLAGS.
* Makefile.in: Regenerate.
2007-04-12 Bob Wilson <bob.wilson@acm.org>
* emulparams/elf32xtensa.sh (OTHER_SECTIONS): KEEP property sections.
2007-04-10 Richard Henderson <rth@redhat.com>
* ldlang.c (relax_sections): Initialize and increment
link_info.relax_trip.
2007-04-04 Paul Brook <paul@codesourcery.com>
* configure.tgt: Loosen checks for arm uclinux eabi targets.
2007-04-02 H.J. Lu <hongjiu.lu@intel.com>
PR ld/4090
* ldexp.h (node_type): Add lineno.
* ldexp.c: Include "ldlex.h".
(exp_intop): Set the lineno field from lineno.
(exp_bigintop): Likewise.
(exp_relop): Likewise.
(exp_nameop): Likewise.
(exp_binop): Set the lineno field from lineno of lhs.
(exp_trinop): Likewise.
(exp_unop): Set the lineno field from lineno of child.
(exp_assop): Set the lineno field from lineno of src.
(exp_provide): Likewise.
(exp_assert): Set the lineno field from lineno of exp.
(exp_get_abs_int): Set lineno from lineno of nonconstant
expression when report problem.
2007-03-29 Richard Sandiford <richard@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention -l:foo.
* ld.texinfo: Document it.
* ldlang.c (new_afile): If a lang_input_file_is_l_enum
entry as a name beginning with a coloh, convert it to a
lang_input_file_is_search_file_enum entry without the colon.
2007-03-28 Richard Sandiford <richard@codesourcery.com>
* ld.h (ld_config_type): Add rpath_separator.
* ldmain.c (main): Initialize it.
* lexsup.c (parse_args): Honor config.rpath_separator.
* emultempl/elf32.em (gld${EMULATION_NAME}_search_needed): Likewise.
(gld${EMULATION_NAME}_add_sysroot): Likewise.
(gld${EMULATION_NAME}_parse_ld_so_conf): Use config.rpath_separator
rather than ':' when building the path.
* emultempl/vxworks.em (vxworks_before_parse): New function.
Override config.rpath_separator.
(LDEMUL_AFTER_OPEN): Do not change if EXTRA_EM_FILE has been
set to gld${EMULATION_NAME}_after_open; #define that identifier
to vxworks_foo instead.
(LDEMUL_BEFORE_PARSE): Override in the same way as LDEMUL_AFTER_OPEN.
2007-03-28 Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* ld.texinfo: Put the contents after the title page rather
than at the end of the document.
2007-03-26 Alan Modra <amodra@bigpond.net.au>
* Makefile.am: Add dependency on ldemul-list.h for powerpc and
spu target emul files.
* configure.in: Check for mkstemp and waitpid.
* Makefile.in: Regenerate.
* configure: Regenerate.
* config.in: Regenerate.
* ldlang.c (input_file_chain): Make global.
(lang_add_input_file): Don't set lang_has_input_file here.
* ldlang.h (input_file_chain): Declare.
* emultempl/ppc32elf.em (ppc_recognized_file): New function.
(LDEMUL_RECOGNIZED_FILE): Define.
* emultempl/ppc64elf.em (ppc64_recognized_file): New function.
(LDEMUL_RECOGNIZED_FILE): Define.
* emultempl/spuelf.em (struct tflist): New.
(tmp_file_list): New var.
(clean_tmp, embedded_spu_file): New functions.
2007-03-24 Alan Modra <amodra@bigpond.net.au>
* ldlang.c (lang_insert_orphan): Provide start/stop loadaddr syms
rather than defining unconditionally.
(lang_leave_overlay_section): Likewise.
* ld.texinfo (Overlay Description): Update description and examples
for start/stop syms.
2007-03-22 Joseph Myers <joseph@codesourcery.com>
* ld.texinfo: Include VERSION_PACKAGE when reporting version.
2007-03-20 Paul Brook <paul@codesourcery.com>
* emultempl/armelf.em (pic_veneer): New variable.
(PARSE_AND_LIST_PROLOGUE): Add OPTION_PIC_VENEER.
(PARSE_AND_LIST_ARGS_CASES): Ditto.
(PARSE_AND_LIST_LONGOPTS): Add "pic-veneer".
(PARSE_AND_LIST_OPTIONS): Ditto.
* ld.texinfo: Document --pic-veneer.
2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
* ld.texinfo: Document --no-enum-size-warning.
* emultempl/armelf.em (no_enum_size_warning): New.
(arm_elf_create_output_section_statements): Correct typo
in comment. Pass no_enum_size_warning to
bfd_elf32_arm_set_target_relocs.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_NO_ENUM_SIZE_WARNING.
(PARSE_AND_LIST_OPTIONS): Document --no-enum-size-warning.
(PARSE_AND_LIST_ARGS_CASES): Add OPTION_NO_ENUM_SIZE_WARNING
case.
2007-03-19 Bernd Schmidt <bernd.schmidt@analog.com>
* configure.tgt (bfin-*-elf, bfin-*-uclinux*): Add targ_extra_libpath.
(bfin-*-linux-uclibc*): New target.
2007-03-16 Kai Tietz <Kai.Tietz@onevision.com>
* pe-dll.c (make_one): Use pc-relative relocation instead of an
absolute relocation for x86_64-pc-mingw32 target.
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ld_TEXINFOS): Remove ldver.texi.
(AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
(TEXI2DVI): Likewise.
(REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
(ldver.texi): Likewise.
(ld.1): Don't depend on ldver.texi.
(MOSTLYCLEANFILES): Remove ldver.texi.
* Makefile.in: Regenerated.
* configure.in (--with-bugurl): Removed.
* configure: Regenerated.
* lexsup.c: Include bfdver.h.
* ld.texinfo: Include bfdver.texi instead of ldver.texi.
2007-03-11 Hans-Peter Nilsson <hp@bitrange.com>
* emultempl/mmixelf.em: Remove incorrect '#line' directive.
2007-03-08 Alan Modra <amodra@bigpond.net.au>
* ldlang.c (lang_size_sections_1): Correct backwards dot move
test to not trigger on overlays. Only warn on backwards move
if non-default lma.
2007-03-07 Joseph Myers <joseph@codesourcery.com>
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* Makefile.am (ldver.texi): Define BUGURL.
* ld.texinfo: Use BUGURL.
* Makefile.in, configure: Regenerate.
2007-03-07 Nick Clifton <nickc@redhat.com>
PR ld/4023
* emultempl/aix.em (..._before_allocation): Strip sysroot prefix
from any paths being inserted into the output binary's DT_RPATH.
2007-03-02 Nathan Sidwell <nathan@codesourcery.com>
* emulparams/shelf_uclinux.sh: New. Missed in 2007-02-28 commit.
2007-03-01 Joseph Myers <joseph@codesourcery.com>
* ldver.c (ldversion): Remove word "version" from output. Update
copyright date.
2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
* Makefile.am (ALL_EMULATIONS): Add eshelf_uclinux.o
(eshelf_uclinux.c): New target.
* Makefile.in: Rebuilt.
* configure.tgt (sh-*-uclinux* | sh[12]-*-uclinux*): New stanza.
* emulparams/shelf_uclinux.sh: New.
2007-02-28 Alan Modra <amodra@bigpond.net.au>
* configure.tgt: Fix type last change.
* configure.tgt (spu-*-elf*): Delete targ_extra_ofiles.
2007-02-27 Alan Modra <amodra@bigpond.net.au>
* Makefile.am (ALL_EMUL_EXTRA_OFILES): Remove spu_inc.o.
(eelf32_spu.c): Adjust dependencies.
* Makefile.in: Regenerate.
* emultempl/spuelf.em (ovl_mgr): New array. Insert spu_ovl.o
code using bin2c.
(_binary_spu_ovl_o_start, _binary_spu_ovl_o_end): Delete.
(ovl_mgr_stream): Update.
* emultempl/spu_inc.s: Delete.
* emultempl/spu_none.s: Delete.
2007-02-26 Alan Modra <amodra@bigpond.net.au>
* emultempl/spuelf.em (_binary_builtin_ovl_mgr_start): Rename
to _binary_spu_ovl_o_start.
(_binary_builtin_ovl_mgr_end): Rename to _binary_spu_ovl_o_end.
(spu_elf_load_ovl_mgr): Fatal error on missing overlay manager.
* emultempl/spu_inc.s: Rename symbols.
* emultempl/spu_none.s: New file.
* emultempl/spu_ovl.S: Update copyright.
* Makefile.am (spu_inc.o): Try building with ld -r first, then
gas incbin, then build without overlay manager.
* Makefile.in: Regenerate.
2007-02-22 Joseph Myers <joseph@codesourcery.com>
* configure.tgt (mips64*el-*-linux-*, mips64*-*-linux-*,
mips*el-*-linux-*, mips*-*-linux-*): Set
targ_extra_libpath=$targ_extra_emuls.
2007-02-21 Nick Clifton <nickc@redhat.com>
* ldlang.c (ldlang_override_segment_assignment): New function.
* ldlang.h (ldlang_override_segment_assignment): Prototype.
* ldmain.c (link_callbacks): Add
ldlang_override_segment_assignment.
2007-02-20 Alan Modra <amodra@bigpond.net.au>
* ldexp.c (fold_name <LOADADDR>): Ensure result is always absolute.
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.in (--with-bugurl): New option.
* configure: Regenerate.
* Makefile.am (REPORT_BUGS_TO): Define.
(INCLUDES): Define REPORT_BUGS_TO.
Regenerate dependencies.
* Makefile.in: Regenerate.
* ld.h: Remove include of bin-bugs.h.
* lexsup.c (help): Don't print empty REPORT_BUGS_TO.
2007-02-17 Alan Modra <amodra@bigpond.net.au>
* ldcref.c (check_reloc_refs): Compare section for local syms.
2007-02-13 Alan Modra <amodra@bigpond.net.au>
* emultempl/spu_ovl.S (__ovly_return, __ovly_load): Set sym size.
(__ovly_load_event): Define.
(size): Rename to osize.
* emultempl/spu_ovl.o: Regenerate.
2007-02-13 Alan Modra <amodra@bigpond.net.au>
* emulparams/elf64ppc.sh (OTHER_READWRITE_SECTIONS): Add ".branch_lt".
* emultempl/ppc64elf.em (ppc_add_stub_section): Create without
SEC_RELOC flag set.
2007-02-09 H.J. Lu <hongjiu.lu@intel.com>
* configure.in (targ_extra_emuls): Add $targ64_extra_emuls if
want64 is true.
(targ_extra_libpath): Add $targ64_extra_libpath if want64 is
true
* configure: Regenerated.
* configure.tgt (targ_extra_libpath): Initialize.
(targ64_extra_emuls): New. Document. Initialize.
(targ64_extra_libpath): Likewise.
(i[3-7]86-*-linux-*): Set targ64_extra_emuls and
targ64_extra_libpath.
(powerpc*-*-linux*): Likewise.
(s390-*-linux*): Likewise.
2007-02-07 Paul Brook <paul@codesourcery.com>
* configure.tgt: Add arm*-*-uclinux-*eabi.
2007-02-06 H.J. Lu <hongjiu.lu@intel.com>
* ldlang.c (lang_size_sections_1): Add a missing `)'.
2007-02-06 Alan Modra <amodra@bigpond.net.au>
PR ld/3966
* ldlang.c (lang_size_sections_1): Don't warn on backwards dot
move unless section size is non-zero.
2007-02-05 Dave Brolley <brolley@redhat.com>
* Makefile.am (ALL_EMULATIONS): Add support for Toshiba MeP.
* configure.tgt: Likewise.
* scripttempl/mep.sc: New file.
* emulparams/elf32mep.sh: New file.
* Makefile.in: Regenerate.
2006-01-29 Julian Brown <julian@codesourcery.com>
* NEWS: Mention --vfp11-denorm-fix option.
* ld.texinfo: Document above.
* emulparams/armelf_linux.sh (OTHER_TEXT_SECTIONS): Add
.vfp11_veneer section.
* emulparams/armelf.sh (OTHER_TEXT_SECTIONS): Likewise.
* emultempl/armelf.em (vfp11_denorm_fix): New static variable.
(arm_elf_before_allocation): Call bfd_elf32_arm_set_vfp11_fix,
bfd_elf32_arm_init_maps and bfd_elf32_arm_vfp11_erratum_scan.
(arm_elf_after_allocation): New function. Call
bfd_elf32_arm_vfp11_fix_veneer_locations for all input statements.
(arm_elf_create_output_section_statements): Pass vfp11 fix command
line option to BFD.
(OPTION_VFP11_DENORM_FIX): New option.
(PARSE_AND_LIST_LONGOPTS): Handle new option.
(PARSE_AND_LIST_OPTIONS): Likewise.
(PARSE_AND_LIST_ARGS_CASES): Likewise.
(LDEMUL_AFTER_ALLOCATION): Define.
2007-01-24 H.J. Lu <hongjiu.lu@intel.com>
* ldgram.y (SIZEOF_HEADERS): Remove duplicated one.
(DEFSYMEND): Likewise.
(NAME): Likewise.
(LNAME): Likewise.
2007-01-19 Murali Vemulapati <murali.vemulapati@gmail.com>
* pe-dll.c: (make_one) Conditionally include jump stubs.
* emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Identify
redundant jump stubs from import libraries and exclude them from
link.
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* ld.h (args_type): Add new symbolic and dynamic_list fields.
* ld.texinfo: Update -Bsymbolic-functions.
* ldmain.c (main): Initialize command_line.symbolic to
symbolic_unset and command_line.dynamic_list to
dynamic_list_unset. Check -Bsymbolic, -Bsymbolic-functions and
--dynamic-list* before setting link_info.symbolic,
link_info.dynamic and link_info.dynamic_data.
* lexsup.c (option_values): Add OPTION_SYMBOLIC_FUNCTIONS.
(ld_options): Use OPTION_SYMBOLIC_FUNCTIONS with
-Bsymbolic-functions.
(parse_args): Handle -Bsymbolic-functions. Don't set
link_info.dynamic, link_info.dynamic_data and link_info.symbolic
here. Set command_line.symbolic for -Bsymbolic. Set
command_line.dynamic_list and command_line.symbolic for
--dynamic-list-data, --dynamic-list-cpp-new,
--dynamic-list-cpp-typeinfo and --dynamic-list.
2007-01-19 Jakub Jelinek <jakub@redhat.com>
H.J. Lu <hongjiu.lu@intel.com>
* emultempl/elf32.em (handle_option): Make sure -z max-page-size
or -z common-page-size argument is a power of 2. Call
bfd_emul_set_maxpagesize and bfd_emul_set_commonpagesize.
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* ldmain.c (main): Don't call bfd_emul_set_maxpagesize nor
bfd_emul_set_commonpagesize.
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention --default-script/-dT.
* ld.h (args_type): Add a default_script field.
* ld.texinfo: Document --default-script/-dT.
* ldmain.c (main): Handle command_line.default_script.
* lexsup.c (option_values): Add OPTION_DEFAULT_SCRIPT.
(ld_options): Add entries for --default-script and -dT.
(parse_args): Handle --default-script/-dT.
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* NEWS: Mention -Bsymbolic-functions, --dynamic-list-data and
--dynamic-list-cpp-new.
* ld.texinfo: Document -Bsymbolic-functions, --dynamic-list-data
and --dynamic-list-cpp-new.
* ldlang.c (lang_append_dynamic_list_cpp_new): New.
(lang_process): Change link_info.dynamic to
link_info.dynamic_list.
(lang_append_dynamic_list): Likewise.
* ldmain.c (main): Likewise. Initialize link_info.dynamic and
link_info.dynamic_data to FALSE.
* ldlang.h (lang_append_dynamic_list_cpp_new): New.
* lexsup.c (option_values): Add OPTION_DYNAMIC_LIST_DATA and
OPTION_DYNAMIC_LIST_CPP_NEW.
(ld_options): Add entries for -Bsymbolic-functions,
--dynamic-list-data and --dynamic-list-cpp-new. Make
-Bsymbolic-functions an alias of --dynamic-list-data.
(parse_args): Change link_info.dynamic to link_info.dynamic_list.
Set link_info.dynamic to TRUE for --dynamic-list and
--dynamic-list-cpp-typeinfo. Handle --dynamic-list-data and
--dynamic-list-cpp-new.
2007-01-11 Nathan Sidwell <nathan@codesourcery.com>
* emultempl/elf-generic.em (gdl_map_segments): Only allow header
shrinkage for the first few iterations.
2007-01-08 Kai Tietz <kai.tietz@onevision.com>
* configure.tgt: Renamed target x86_64-*-mingw64 to
x86_64-*-mingw*.
2007-01-08 Pedro Alves <pedro_alves@portugalmail.pt>
* configure.host: Add i[3-7]86-*-mingw* case.
2007-01-08 Nick Clifton <nickc@redhat.com>
* pep-dll.h (pep_bfd_is_dll): Add prototype.
2007-01-08 Aurelien Jarno <aurelien@aurel32.net>
PR ld/3843
* configure.tgt (x86_64_[k]freebsd*): Add targ_extra_libpath and
tdir_elf_i386_fbsd.
2007-01-06 Nathan Sidwell <nathan@codesourcery.com>
* ldexp.c (fold_name): Issue error on undefined sections.
2007-01-02 Alan Modra <amodra@bigpond.net.au>
* pe-dll.c: Include pe-dll.h.
* pep-dll.c (pe_bfd_is_dll): Define.
For older changes see ChangeLog-2006
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End:
* elf32-xtensa.c (extend_ebb_bounds_forward): Use renamed
XTENSA_PROP_NO_TRANSFORM flag instead of XTENSA_PROP_INSN_NO_TRANSFORM.
(extend_ebb_bounds_backward, compute_text_actions): Likewise.
(compute_ebb_proposed_actions, coalesce_shared_literal): Likewise.
(xtensa_get_property_predef_flags): Likewise.
(compute_removed_literals): Pass new arguments to is_removable_literal.
(is_removable_literal): Add sec, prop_table and ptblsize arguments.
Do not remove literal if the NO_TRANSFORM property flag is set.
gas/
* config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
(XTENSA_PROP_NO_TRANSFORM): ...this.
(frag_flags_struct): Move is_no_transform out of the insn sub-struct.
(xtensa_mark_frags_for_org): New.
(xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
(xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
(get_frag_property_flags): Adjust reference to is_no_transform flag.
(xtensa_frag_flags_combinable): Likewise.
(frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
* config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
include/elf/
* xtensa.h (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
(XTENSA_PROP_NO_TRANSFORM): ...this.
ld/
* emultempl/xtensaelf.em (replace_insn_sec_with_prop_sec): Use renamed
XTENSA_PROP_NO_TRANSFORM flag instead of XTENSA_PROP_INSN_NO_TRANSFORM.
* embedspu.sh: Emit SPU ELF image to .data.rel.ro.speelf if
pic or pie and image needs relocs.
ld/
* emultempl/spuelf.em (base_name): New function, split out from..
(embedded_spu_file) ..here. Pass -fPIC or -fpie to embedspu
invocation if we deduce a shared lib or position independent
executable build by looking at ctrbegin* linker input files.
* ldlang.h (enum section_type): Add overlay_section.
* ldlang.c (lang_add_section): Handle flags for overlay_section
as per normal_section.
(lang_size_sections_1): When setting lma, detect overlays by
os->sectype rather than by looking for overlapping vmas.
(lang_enter_overlay_section): Use overlay_section type.
(lang_leave_overlay): Set first overlay section to normal.
ld/testsuite/
* ld-spu/ovl.lnk: Use OVERLAY keyword.
2007-04-02 H.J. Lu <hongjiu.lu@intel.com>
PR ld/4090
* ldexp.h (node_type): Add lineno.
* ldexp.c: Include "ldlex.h".
(exp_intop): Set the lineno field from lineno.
(exp_bigintop): Likewise.
(exp_relop): Likewise.
(exp_nameop): Likewise.
(exp_binop): Set the lineno field from lineno of lhs.
(exp_trinop): Likewise.
(exp_unop): Set the lineno field from lineno of child.
(exp_assop): Set the lineno field from lineno of src.
(exp_provide): Likewise.
(exp_assert): Set the lineno field from lineno of exp.
(exp_get_abs_int): Set lineno from lineno of nonconstant
expression when report problem.
ld/testsuite/
2007-04-02 H.J. Lu <hongjiu.lu@intel.com>
PR ld/4090
* ld-elf/expr1.d: New file.
* ld-elf/expr1.s: Likewise.
* ld-elf/expr1.t: Likewise.
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention -l:foo.
* ld.texinfo: Document it.
* ldlang.c (new_afile): If a lang_input_file_is_l_enum
entry as a name beginning with a coloh, convert it to a
lang_input_file_is_search_file_enum entry without the colon.
ld/testsuite/
* ld-libs/lib-1.s, ld-libs/lib-2.s, ld-libs/lib-2.d,
* ld-libs/libs.exp: New files.
* ld.h (ld_config_type): Add rpath_separator.
* ldmain.c (main): Initialize it.
* lexsup.c (parse_args): Honor config.rpath_separator.
* emultempl/elf32.em (gld${EMULATION_NAME}_search_needed): Likewise.
(gld${EMULATION_NAME}_add_sysroot): Likewise.
(gld${EMULATION_NAME}_parse_ld_so_conf): Use config.rpath_separator
rather than ':' when building the path.
* emultempl/vxworks.em (vxworks_before_parse): New function.
Override config.rpath_separator.
(LDEMUL_AFTER_OPEN): Do not change if EXTRA_EM_FILE has been
set to gld${EMULATION_NAME}_after_open; #define that identifier
to vxworks_foo instead.
(LDEMUL_BEFORE_PARSE): Override in the same way as LDEMUL_AFTER_OPEN.
ld/testsuite/
* ld-vxworks/rpath-1.s, ld-vxworks/rpath-1.d,
* ld-vxworks/vxworks.exp: New files.
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* doc/bfd.texinfo: Put the contents after the title page rather
than at the end of the document.
binutils/
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* doc/binutils.texi: Put the contents after the title page rather
than at the end of the document.
gas/
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* doc/as.texinfo: Put the contents after the title page rather
than at the end of the document.
gprof/
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* gprof.texi: Put the contents after the title page rather
than at the end of the document.
ld/
200x-xx-xx Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* ld.texinfo: Put the contents after the title page rather
than at the end of the document.
* ldlang.c (lang_insert_orphan): Provide start/stop loadaddr syms
rather than defining unconditionally.
(lang_leave_overlay_section): Likewise.
* ld.texinfo (Overlay Description): Update description and examples
for start/stop syms.
ld/testsuite/
* ld-elf/overlay.d: -u symbols we want to see in the output.
* Makefile.am (bfdver.h): Only set VERSION_PACKAGE in bfdver.texi
if nonempty.
* configure.in (REPORT_BUGS_TO): Do not use "URL:" prefix.
* Makefile.in, configure, doc/Makefile.in: Regenerate.
binutils:
* doc/binutils.texi: Include VERSION_PACKAGE when reporting
version.
gas:
* doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
gprof:
* Makefile.am (TEXI2POD): Include $(AM_MAKEINFOFLAGS).
(AM_MAKEINFOFLAGS, TEXI2DVI): Define with -I ../bfd/doc.
* Makefile.in: Regenerate.
* gprof.texi: Include bfdver.texi. Report both VERSION_PACKAGE
and VERSION.
ld:
* ld.texinfo: Include VERSION_PACKAGE when reporting version.
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* doc/Makefile.am (config.texi): Define BUGURL.
* doc/binutils.texi: Use BUGURL. Remove text about large files
and uuencoding.
* Makefile.in, configure, doc/Makefile.in: Regenerate.
gas:
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* doc/Makefile.am (gasver.texi): Define BUGURL.
* doc/as.texinfo: Use BUGURL.
* Makefile.in, configure, doc/Makefile.in: Regenerate.
ld:
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* Makefile.am (ldver.texi): Define BUGURL.
* ld.texinfo: Use BUGURL.
* Makefile.in, configure: Regenerate.
to _binary_spu_ovl_o_start.
(_binary_builtin_ovl_mgr_end): Rename to _binary_spu_ovl_o_end.
(spu_elf_load_ovl_mgr): Fatal error on missing overlay manager.
* emultempl/spu_inc.s: Rename symbols.
* emultempl/spu_none.s: New file.
* emultempl/spu_ovl.S: Update copyright.
* Makefile.am (spu_inc.o): Try building with ld -r first, then
gas incbin, then build without overlay manager.
* Makefile.in: Regenerate.
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* ld.h (args_type): Add new symbolic and dynamic_list fields.
* ld.texinfo: Update -Bsymbolic-functions.
* ldmain.c (main): Initialize command_line.symbolic to
symbolic_unset and command_line.dynamic_list to
dynamic_list_unset. Check -Bsymbolic, -Bsymbolic-functions and
--dynamic-list* before setting link_info.symbolic,
link_info.dynamic and link_info.dynamic_data.
* lexsup.c (option_values): Add OPTION_SYMBOLIC_FUNCTIONS.
(ld_options): Use OPTION_SYMBOLIC_FUNCTIONS with
-Bsymbolic-functions.
(parse_args): Handle -Bsymbolic-functions. Don't set
link_info.dynamic, link_info.dynamic_data and link_info.symbolic
here. Set command_line.symbolic for -Bsymbolic. Set
command_line.dynamic_list and command_line.symbolic for
--dynamic-list-data, --dynamic-list-cpp-new,
--dynamic-list-cpp-typeinfo and --dynamic-list.
ld/testsuite/
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* ld-elf/dl6.c: New file.
* ld-elf/dl6a.out: Likewise.
* ld-elf/dl6amain.c: Likewise.
* ld-elf/dl6b.out: Likewise.
* ld-elf/dl6bmain.c: Likewise.
* ld-elf/dl6cmain.c: Likewise.
* ld-elf/dl6dmain.c: Likewise.
* ld-elf/shared.exp: Add new tests for -Bsymbolic,
-Bsymbolic-functions, --dynamic-list-data and
--dynamic-list-cpp-new.
2007-01-19 Jakub Jelinek <jakub@redhat.com>
H.J. Lu <hongjiu.lu@intel.com>
* emultempl/elf32.em (handle_option): Make sure -z max-page-size
or -z common-page-size argument is a power of 2. Call
bfd_emul_set_maxpagesize and bfd_emul_set_commonpagesize.
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* ldmain.c (main): Don't call bfd_emul_set_maxpagesize nor
bfd_emul_set_commonpagesize.
ld/testsuite/
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* ld-elf/maxpage3.t: New file.
* ld-elf/maxpage3a.d: Likewise.
* ld-elf/maxpage3b.d: Likewise.
* ld-elf/maxpage3c.d: Likewise.
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* elf-bfd.h (bfd_elf_link_mark_dynamic_symbol): Add an
argument, Elf_Internal_Sym *.
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Mark a data
symbol dynamic if info->dynamic_data is TRUE.
(bfd_elf_record_link_assignment): Updated call to
bfd_elf_record_link_assignment.
(_bfd_elf_merge_symbol): Likewise. Always call
bfd_elf_link_mark_dynamic_symbol.
include/
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* bfdlink.h (bfd_link_info): Rename dynamic to dynamic_list.
Add dynamic and dynamic_data.
ld/
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* NEWS: Mention -Bsymbolic-functions, --dynamic-list-data and
--dynamic-list-cpp-new.
* ld.texinfo: Document -Bsymbolic-functions, --dynamic-list-data
and --dynamic-list-cpp-new.
* ldlang.c (lang_append_dynamic_list_cpp_new): New.
(lang_process): Change link_info.dynamic to
link_info.dynamic_list.
(lang_append_dynamic_list): Likewise.
* ldmain.c (main): Likewise. Initialize link_info.dynamic and
link_info.dynamic_data to FALSE.
* ldlang.h (lang_append_dynamic_list_cpp_new): New.
* lexsup.c (option_values): Add OPTION_DYNAMIC_LIST_DATA and
OPTION_DYNAMIC_LIST_CPP_NEW.
(ld_options): Add entries for -Bsymbolic-functions,
--dynamic-list-data and --dynamic-list-cpp-new. Make
-Bsymbolic-functions an alias of --dynamic-list-data.
(parse_args): Change link_info.dynamic to link_info.dynamic_list.
Set link_info.dynamic to TRUE for --dynamic-list and
--dynamic-list-cpp-typeinfo. Handle --dynamic-list-data and
--dynamic-list-cpp-new.
ld/testsuite/
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* ld-elf/del.cc: New.
* ld-elf/dl5.cc: Likewise.
* ld-elf/dl5.out: Likewise.
* ld-elf/new.cc: Likewise.
* ld-elf/shared.exp: Add tests for --dynamic-list-data and
--dynamic-list-cpp-new.
* elf.c (assign_file_positions_for_load_sections): We can
require fewer phdrs than expected.
ld/
* emultempl/elf-generic.em (gdl_map_segments): Only allow header
shrinkage for the first few iterations.
ld/testsuite/
* ld-elf/header.d: New.
* ld-elf/header.t: New.
* ld-elf/header.s: New.
* pe-dll.h (pe_bfd_is_dll): Declare.
* emultempl/pe.em (gld_${EMULATION_NAME}_recognized_file): Recognize dlls using
pe_bfd_is_dll instead of using the filename extension.
* elf32-xtensa.c (elf_xtensa_special_sections): Add .xtensa.info.
gas/
* config/tc-xtensa.c (XSHAL_ABI): Add default definition.
(directive_state): Disable scheduling by default.
(xtensa_add_config_info): New.
(xtensa_end): Call xtensa_add_config_info.
gas/testsuite/
* gas/elf/section2.e-xtensa: New file.
* gas/elf/elf.exp: Use it.
include/
* xtensa-config.h (XSHAL_ABI): New.
(XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New.
ld/
* emultempl/xtensaelf.em (XSHAL_ABI): Add default definition.
(replace_insn_sec_with_prop_sec): Use bfd_make_section_with_flags.
Delete redundant code to set sections flags and alignment.
(xt_config_info_unpack_and_check, check_xtensa_info): New.
(elf_xtensa_after_open): Iterate over input statements instead of
link_info.input_bfds.
(elf_xtensa_before_allocation): Likewise. Call check_xtensa_info for
each input, and write a new .xtensa.info section in the output.
* emulparams/elf32bmip.sh (OTHER_GOT_RELOC_SECTIONS): Define.
* emulparams/elf32bmipn32-defs.sh (OTHER_GOT_RELOC_SECTIONS): Likewise.
ld/testsuite/
* ld-mips-elf/rel32-o32.d: Bump the section number of .text by 1
to account for the fact that .rel.dyn is now before .text in the
section table.
* ld-mips-elf/rel32-n32.d: Likewise.
* ld-mips-elf/rel64.d: Likewise.
* bfd/elf64-sparc.c: Add FreeBSD support.
(elf64_sparc_fbsd_post_process_headers): New function.
* bfd/targets.c (_bfd_target_vector): Add bfd_elf64_sparc_freebsd_vec.
* bfd/config.bfd (sparc64-*-freebsd*): Set targ_defvec to bfd_elf64_sparc_freebsd_vec.
* bfd/configure.in: Add entry for bfd_elf64_sparc_freebsd_vec.
* bfd/configure: Regenerate.
* gas/config/tc-sparc.c (md_parse_option): Treat any target starting with elf32-sparc
as a viable target for the -32 switch and any target starting with elf64-sparc as a
viable target for the -64 switch.
(sparc_target_format): For 64-bit ELF flavoured output use ELF_TARGET_FORMAT64
while for 32-bit ELF flavoured output use ELF_TARGET_FORMAT.
* gas/config/tc-sparc.h (ELF_TARGET_FORMAT, ELF_TARGET_FORMAT64): Define.
* ld/emulparams/elf64_sparc_fbsd.sh (OUTPUT_FORMAT): Define as elf64-sparc-freebsd.
* Makefile.am (eelf64bmip.c): Depend on emulparams/elf64bmip-defs.sh.
(eelf64btsmip.c, eelf64ltsmip.c): Likewise.
* Makefile.in: Regenerate.
* emulparams/elf32bmipn32-defs.sh (INITIAL_READONLY_SECTIONS): Include
.reginfo rather than .MIPS.options.
* emulparams/elf64bmip-defs.sh: New file.
* emulparams/elf64bmip.sh: Include it.
(COMMONPAGESIZE): Delete.
* emulparams/elf64btsmip.sh: As for elf64bmip.sh.
ld/testsuite/
* ld-mips-elf/branch-misc-1.d: Set the start address to 0x20000000.
* ld-mips-elf/jalbal.d: Likewise 0x200000a0.
* ld-mips-elf/jaloverflow-2.d: Likewise 0x20000000.
* ld-mips-elf/reloc-3-n32.d: Likewise.
* ld-mips-elf/reloc-3.d: Likewise.
* ld-mips-elf/textrel-1.d: Don't require a specific file offset for
.dynamic.
* emulparams/elf32xtensa.sh: Set MAXPAGESIZE here instead of including
xtensa-config.sh.
* Makefile.am (eelf32xtensa.c): Remove dependency on xtensa-config.sh.
* Makefile.in: Regenerate.
(autofilter_symbolprefixlist) : Remove __imp_.
(is_import) : New.
(auto-export) : Remove re-import check. Moved to callers.
(process_def_file) : Check is symbol is an import. Always underscore __imp_.
Only skip underscore on underscored targets.
(make_one) : Always underscore __imp_.
(pe_create_runtime_relocator_reference) : Only underscore _pei386_runtime_relocator on underscored targets.
(pe_process_import_defs) : Always underscore __imp_.
* pe.em (U) : New macro.
(set_pe_subsystem) : Remove underscore from _WinMainCRTStartup on wince subsystem case.
(pe_find_data_imports) : Use U on "_head_".
(gld_${EMULATION_NAME}_unrecognized_file) : Use U.
PR ld/3249
* scripttempl/elf.sc: Don't combine .gnu.linkonce.d.*personality*
and .gnu.linkonce.wi.* sections with .data and .debug_info for
relocatable link.
argument and emits the string followed by a comma and then the length of
the string.
(CONST_STRNEQ): New macro. Checks to see if a variable string has a constant
string as its initial characters.
(CONST_STRNCPY): New macro. Copies a constant string to the start of a
variable string.
* bfd-in2.h: Regenerate.
* <remainign files>: Make use of the new macros.
* elf32-xtensa.c (xtensa_get_property_section_name): Delete.
(xtensa_get_property_section): New.
(xtensa_read_table_entries): Use xtensa_get_property_section.
(relax_property_section, xtensa_get_property_predef_flags): Handle
group name suffixes in property section names.
(match_section_group): New.
gas/
* config/tc-xtensa.c (FINI_LITERAL_SECTION_NAME): Delete.
(INIT_LITERAL_SECTION_NAME): Delete.
(lit_state struct): Remove segment names, init_lit_seg, and
fini_lit_seg. Add lit_prefix and current_text_seg.
(init_literal_head_h, init_literal_head): Delete.
(fini_literal_head_h, fini_literal_head): Delete.
(xtensa_begin_directive): Move argument parsing to
xtensa_literal_prefix function.
(xtensa_end_directive): Deallocate lit_prefix field of lit_state.
(xtensa_literal_prefix): Parse the directive argument here and
record it in the lit_prefix field. Remove code to derive literal
section names.
(linkonce_len): New.
(get_is_linkonce_section): Use linkonce_len. Check for any
".gnu.linkonce.*" section, not just text sections.
(md_begin): Remove initialization of deleted lit_state fields.
(xtensa_reorder_segments, xtensa_post_relax_hook): Remove references
to init_literal_head and fini_literal_head.
(xtensa_move_literals): Likewise. Skip literals for .init and .fini
when traversing literal_head list.
(match_section_group): New.
(cache_literal_section): Rewrite to determine the literal section
name on the fly, create the section and return it.
(xtensa_switch_to_literal_fragment): Adjust for cache_literal_section.
(xtensa_switch_to_non_abs_literal_fragment): Likewise.
(xtensa_create_property_segments, xtensa_create_xproperty_segments):
Use xtensa_get_property_section from bfd.
(retrieve_xtensa_section): Delete.
* doc/c-xtensa.texi (Xtensa Options): Fix --text-section-literals
description to refer to plural literal sections and add xref to
the Literal Directive section.
(Literal Directive): Describe new rules for deriving literal section
names. Add footnote for special case of .init/.fini with
--text-section-literals.
(Literal Prefix Directive): Replace old naming rules with xref to the
Literal Directive section.
ld/
* emulparams/elf32xtensa.sh (.xt.prop): Add .xt.prop.*.
* scripttempl/elfxtensa.sc (.text): Add .literal.*.
* Makefile.am: Add rules to build pe-arm-wince.lo and pei-arm-wince.lo objects.
* Makefile.in: Regenerate.
* pe-arm-wince.c: New file.
* pei-arm-wince.c: New file.
* pei-arm.c: Remove ARM_WINCE block.
* pe-arm.c: Remove ARM_WINCE block. Rename
bfd_arm_pe_allocate_interworking_sections,
bfd_arm_pe_get_bfd_for_interworking, and
bfd_arm_pe_process_before_allocation to
bfd_armpe_allocate_interworking_sections,
bfd_armpe_get_bfd_for_interworking, and
bfd_armpe_process_before_allocation. Move them before including bfd.h.
* bfd.c: ARM wince bfd format names were renamed. Adjust.
* coff-arm.c [ARM_WINCE]: Adjust so Windows CE doesn't end up with unexpected/conflicting relocs.
* targets.c: The arm-wince-pe target got its own new vector. Adjust.
* config.bfd: Likewise.
* configure.in: Likewise.
* configure: Regenerate.
binutils
* configure.in: Split arm-pe and arm-wince-pe. Build dlltool with -DDLLTOOL_ARM_WINCE for Windows CE case.
* configure: Regenerate.
* dlltool.c: Add support for arm-wince.
gas
* Makefile.am (TARG_ENV_HFILES): Add te-wince-pe.h.
* Makefile.in: Regenerate.
* config/tc-arm.h [TARGET_FORMAT]: ARM wince bfd names were renamed. Adjust.
ld
* Makefile.am: Split arm-wince into its own emulation.
* Makefile.in: Regenerate.
* configure.tgt: Set targ_emul to arm_wince_pe for ARM Windows CE targets.
* pe-dll.c : Define PE_ARCH_arm_wince.
(pe_detail_list): Add PE_ARCH_arm_wince case.
(make_one): Handle PE_ARCH_arm_epoc and PE_ARCH_arm_wince cases.
* emulparams/arm_wince_pe.sh: New file.
* emultempl/pe.em: Handle new TARGET_IS_arm_wince_pe define.
Remap bfd_arm_allocate_interworking_sections, bfd_arm_get_bfd_for_interworking and
bfd_arm_process_before_allocation for arm-pe and arm-wince-pe targets too.
(gld_${EMULATION_NAME}_recognized_file): Handle arm-wince and arm-epoc bfd format names.
PR 3052
* ldlang.h (lang_output_section_statement_type): Replace
"processed" field with "processed_vma" and "processed_lma".
* ldlang.c (lang_do_assignments_1): Move lma setting code..
(lang_size_sections_1): ..to here.
(lang_reset_memory_regions): Adjust for
lang_output_section_statement_type change.
* ldexp.c (fold_name): Likewise.
And this is something I forgot the check in from the previous patch.
ld/testsuite/
* ld-scripts/overlay-size-map.d: Adjust.
PR ld/3006
* ldlang.c (lang_section_bst_type): Moved to ...
* ldlang.h: Here.
* ldlang.h (lang_wild_statement_struct): Add a tree field.
* ldlang.c (wild_sort_fast): Use the tree field for BST.
(wild): Likeise.
(analyze_walk_wild_section_handler): Initialize the tree field.
* lexsup.c: Add --print-gc-sections and --no-print-gc-sections switches.
* ld.texinfo: Document new switches.
* NEWS: Mention new switches.
* bfdlink.h (struct bfd_link_info): New field: print_gc_sections.
* elflink.c (elf_gc_sweep): If info.print_gc_sections is true, list removed sections to stderr.
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* config.bfd (sh-*-vxworks): Use bfd_elf32_shvxworks_vec and
bfd_elf32_shlvxworks_vec.
* configure.in (bfd_elf32_sh64_vec): Add elf-vxworks.lo.
(bfd_elf32_sh64l_vec, bfd_elf32_sh64lin_vec): Likewise.
(bfd_elf32_sh64blin_vec, bfd_elf32_sh64lnbsd_vec): Likewise.
(bfd_elf32_sh64nbsd_vec, bfd_elf32_sh_vec): Likewise.
(bfd_elf32_shblin_vec, bfd_elf32_shl_vec): Likewise.
(bfd_elf32_shl_symbian_vec, bfd_elf32_shlin_vec): Likewise.
(bfd_elf32_shlnbsd_vec, bfd_elf32_shnbsd_vec): Likewise.
(bfd_elf32_shlvxworks_vec, bfd_elf32_shvxworks_vec): New stanzas.
* configure: Regenerate.
* Makefile.am: Regenerate dependencies.
* Makefile.in: Regenerate.
* elf-vxworks.c (elf_vxworks_gott_symbol_p): New function.
(elf_vxworks_add_symbol_hook): Use it.
(elf_vxworks_link_output_symbol_hook): Likewise. Use the hash
table entry to check for weak undefined symbols and to obtain
the original bfd.
(elf_vxworks_emit_relocs): Use target_index instead of this_idx.
* elf32-sh-relocs.h: New file, split from elf32-sh.c.
(R_SH_DIR32): Use SH_PARTIAL32 for the partial_inplace field,
SH_SRC_MASK32 for the src_mask field, and SH_ELF_RELOC for the
special_function field.
(R_SH_REL32): Use SH_PARTIAL32 and SH_SRC_MASK32 here too.
(R_SH_REL32, R_SH_TLS_GD_32, R_SH_TLS_LD_32): Likewise.
(R_SH_TLS_LDO_32, R_SH_TLS_IE_32, R_SH_TLS_LE_32): Likewise.
(R_SH_TLS_DTPMOD32, R_SH_TLS_DTPOFF32, R_SH_TLS_TPOFF32): Likewise.
(R_SH_GOT32, R_SH_PLT32, R_SH_COPY, R_SH_GLOB_DAT): Likewise.
(R_SH_JMP_SLOT, R_SH_RELATIVE, R_SH_GOTOFF, R_SH_GOTPC): Likewise.
(SH_PARTIAL32, SH_SRC_MASK32, SH_ELF_RELOC): Undefine at end of file.
* elf32-sh.c: Include elf32-vxworks.h.
(MINUS_ONE): Define.
(sh_elf_howto_table): Include elf32-sh-relocs.h with SH_PARTIAL32
set to TRUE, SH_SRC_MASK32 set to 0xffffffff, and SH_ELF_RELOC set
to sh_elf_reloc.
(sh_vxworks_howto_table): New variable. Include elf32-sh-relocs.h
with SH_PARTIAL32 set to FALSE, SH_SRC_MASK32 set to 0, and
SH_ELF_RELOC set to bfd_elf_generic_reloc.
(vxworks_object_p, get_howto_table): New functions.
(sh_elf_reloc_type_lookup): Fix typo. Use get_howto_table.
(sh_elf_info_to_howto): Use get_howto_table.
(sh_elf_relax_section): Honor the partial_inplace field of the
R_SH_DIR32 howto.
(sh_elf_relax_delete_bytes): Likewise.
(elf_sh_plt_info): New structure.
(PLT_ENTRY_SIZE): Replace both definitions with...
(ELF_PLT_ENTRY_SIZE): ...this new macro, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry_be): Update sizes of both definitions accordingly.
(elf_sh_plt0_entry_le): Likewise.
(elf_sh_plt_entry_be, elf_sh_plt_entry_le): Likewise.
(elf_sh_pic_plt_entry_be, elf_sh_pic_plt_entry_le): Likewise.
(elf_sh_plts): New structure, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry): Delete both definitions.
(elf_sh_plt_entry, elf_sh_pic_plt_entry): Likewise.
(elf_sh_sizeof_plt, elf_sh_plt_plt0_offset): Likewise.
(elf_sh_plt_temp_offset, elf_sh_plt_symbol_offset): Likewise.
(elf_sh_plt_reloc_offset): Likewise.
(movi_shori_putval): Delete in favor of...
(install_plt_field): ...this new function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(get_plt_info): New function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_linker_offset, elf_sh_plt0_gotid_offset): Delete.
(VXWORKS_PLT_HEADER_SIZE, VXWORKS_PLT_ENTRY_SIZE): New macros.
(vxworks_sh_plt0_entry_be, vxworks_sh_plt0_entry_le): New constants.
(vxworks_sh_plt_entry_be, vxworks_sh_plt_entry_le): Likewise.
(vxworks_sh_pic_plt_entry_be, vxworks_sh_pic_plt_entry_le): Likewise.
(get_plt_index, get_plt_offset): New functions.
(elf_sh_link_hash_table): Add srelplt2, plt_info and vxworks_p fields.
(sh_elf_link_hash_table_create): Initialize them.
(sh_elf_create_dynamic_sections): Call
elf_vxworks_create_dynamic_sections for VxWorks.
(allocate_dynrelocs): Use htab->plt_info to get the size of PLT
entries. Allocate relocation entries in .rela.plt.unloaded if
generating a VxWorks executable.
(sh_elf_always_size_sections): New function.
(sh_elf_size_dynamic_sections): Extend .rela.plt handling to
.rela.plt.unloaded.
(sh_elf_relocate_section): Use get_howto_table. Honor
partial_inplace when calculating the addend for dynamic
relocations. Use get_plt_index.
(sh_elf_finish_dynamic_symbol): Use get_plt_index, install_plt_field
and htab->plt_info. Fill in the bra .plt offset for VxWorks
executables. Populate .rela.plt.unloaded. Do not make
_GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(sh_elf_finish_dynamic_sections): Use install_plt_field and
htab->plt_info. Handle cases where there is no special PLT header.
Populate the first relocation in .rela.plt.unloaded and fix up
the remaining entries.
(sh_elf_plt_sym_val): Use get_plt_info.
(elf_backend_always_size_sections): Define.
(TARGET_BIG_SYM, TARGET_BIG_NAME): Override for VxWorks.
(TARGET_LITTLE_SYM, TARGET_BIG_SYM): Likewise.
(elf32_bed, elf_backend_want_plt_sym): Likewise.
(elf_symbol_leading_char, elf_backend_want_got_underscore): Likewise.
(elf_backend_grok_prstatus, elf_backend_grok_psinfo): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing): Likewise.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Likewise.
* targets.c (bfd_elf32_shlvxworks_vec): Declare.
(bfd_elf32_shvxworks_vec): Likewise.
(_bfd_target_vector): Include bfd_elf32_shlvxworks_vec and
bfd_elf32_shvxworks_vec.
gas/
* config/tc-sh.c (apply_full_field_fix): New function.
(md_apply_fix): Use it instead of md_number_to_chars. Do not fill
in fx_addnumber for BFD_RELOC_32_PLT_PCREL.
(tc_gen_reloc): Use fx_addnumber rather than 0 as the default case.
* config/tc-sh.h (TARGET_FORMAT): Override for TE_VXWORKS.
ld/
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* Makefile.am (ALL_EMULATIONS): Add eshelf_vxworks.o and
eshlelf_vxworks.o.
(eshelf_vxworks.c, eshlelf_vxworks.c): New rules.
* Makefile.in: Regenerate.
* configure.tgt (sh-*-vxworks): Use shelf_vxworks and
shlelf_vxworks.
* emulparams/shelf_vxworks.sh: New file.
* emulparams/shlelf_vxworks.sh: Likewise.
* emulparams/vxworks.sh (FINI): Prefix _etext with ${SYMPREFIX}.
(OTHER_END_SYMBOLS): Likewise _ehdr.
(DATA_END_SYMBOLS): Likewise _edata.
* emultempl/vxworks.em (vxworks_after_open): Check whether output_bfd
is indeed an ELF file before dealing with --force-dynamic.
ld/testsuite/
* ld-sh/rd-sh.exp: Treat vxworks1-static.d specially.
* ld-sh/sh-vxworks.exp: New file.
* ld-sh/sh.exp: Extend sh-linux SIZEOF_HEADERS handling to
sh-*-vxworks.
* ld-sh/vxworks1-le.dd, ld-sh/vxworks1-lib-le.dd,
* ld-sh/vxworks1-lib.dd, ld-sh/vxworks1-lib.nd,
* ld-sh/vxworks1-lib.rd, ld-sh/vxworks1-lib.s,
* ld-sh/vxworks1-static.d, ld-sh/vxworks1.dd,
* ld-sh/vxworks1.ld, ld-sh/vxworks1.rd, ld-sh/vxworks1.s,
* ld-sh/vxworks2-static.sd, ld-sh/vxworks2.s,
* ld-sh/vxworks2.sd, ld-sh/vxworks3-le.dd,
* ld-sh/vxworks3-lib-le.dd, ld-sh/vxworks3-lib.dd,
* ld-sh/vxworks3-lib.s, ld-sh/vxworks3.dd, ld-sh/vxworks3.s,
* ld-sh/vxworks4.d, ld-sh/vxworks4a.s, ld-sh/vxworks4b.s,
* ld-sh/reloc1.s, ld-sh/reloc1.d: New tests.
* bfd/elf64-x86-64.c: Add FreeBSD support.
(elf64_x86_64_fbsd_post_process_headers): New function.
* bfd/targets.c (_bfd_target_vector): Add bfd_elf64_x86_64_freebsd_vec.
* bfd/config.bfd (x64_64-*-freebsd*): Add bfd_elf64_x86_64_freebsd_vec to the targ_selvecs.
* bfd/configure.in: Add entry for bfd_elf64_x86_64_freebsd_vec.
* bfd/configure: Regenerate.
* gas/config/tc-i386.c (md_parse_option): Treat any target starting with elf64_x86_64 as a viable target for the -64 switch.
(i386_target_format): For 64-bit ELF flavoured output use ELF_TARGET_FORMAT64.
* gas/config/tc-i386.h (ELF_TARGET_FORMAT64): Define.
* ld/emulparams/elf_x86_64_fbsd.sh (OUTPUT_FORMAT): Define as elf64-x86-64-freebsd.
(wild_sort_fast): New function: Insert a section into a binary search tree.
(output_section_callback_fast): New function: Store a section in BST.
(output_section_callback_tree_to_list): New function: Convert a BST into a list.
(analyze_walk_wild_section_handler): Initialize handler_data elements.
(wild): If the data is sorted by name use the BST method to sort the names.
(autofilter_symbollist): Split into autofilter_symbollist_generic and
autofilter_symbollist_i386.
(pe_detail_list): Add autofilter_symbollist_i386 to i386 case and
autofilter_symbollist_generic for all the others.
(autofilter_symbolprefixlist): Moved _fmode, _impure_ptr, cygwin_attach_dll,
cygwin_premain0, cygwin_premain1, cygwin_premain2, cygwin_premain3,
environ, into autofilter_symbollist_i386.
(auto_export): Get autofilter_symbollist from pe_details.
Add native "%s.lib" format to search list
* ld.texinfo (node WIN32): Update documentation on dynamic lib search order.
Add another reason for using import libs.
* ldlang.c (lang_insert_orphan): Correctly handle the case where
the section is to end up after the section currently at the end
of the list in output_bfd.
2006-06-12 Fred Fish <fnf@specifix.com>
* emulparams/elf32bmip.sh (OTHER_SECTIONS): Keep the
".mdebug.<abi>" and ".gcc_compiled_long<size>" sections
generated by mips gcc.
* elf32-mips.c: Expand comment about ABI-mandated pagesize values.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): define in a more obvious way.
* elf64-mips.c, elfn32-mips.c (ELF_MAXPAGESIZE): Fix value for IRIX6.
Delete old comments.
(ELF_COMMONPAGESIZE): Define in a more obvious way.
[ ld/ChangeLog ]
* emulparams/elf64bmip.sh, emulparams/elf64btsmip.sh (COMMONPAGESIZE):
Define.
[ ld/testsuite/ChangeLog ]
* ld-mips-elf/multi-got-no-shared.d: Adjust for recent change of
ELF_MAXPAGESIZE.
* ldlang.c (struct out_section_hash_entry): Rename from
output_statement_hash_entry. Delete output_section_statement_type
entry. Add statement_union_type entry. Adjust all users.
(output_section_statement_table): Rename from output_statement_table.
Adjust all users.
(output_section_statement_newfunc): Rename from
output_statement_newfunc. Adjust all users.
(output_section_statement_table_init): Rename from
output_statement_table_init. Adjust all users.
(output_section_statement_table_free): Rename from
output_statement_table_free. Adjust all users.
2006-05-11 Carlos O'Donell <carlos@codesourcery.com>
* bfd.texinfo: Rename "Index" to "BFD Index"
gas/
2006-05-11 Carlos O'Donell <carlos@codesourcery.com>
* doc/as.texinfo: Rename "Index" to "AS Index",
and "ABORT" to "ABORT (COFF)".
ld/
2006-05-11 Carlos O'Donell <carlos@codesourcery.com>
* ld.texinfo: Rename "Index" to "LD Index"
