This introduces target/target.h. This file declares some functions
that the shared code can use and that clients must implement. It also
changes some shared code to use these functions.
gdb/ChangeLog:
* target/target.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add target/target.h.
* target.h: Include target/target.h.
(target_read_memory, target_write_memory): Don't declare.
* target.c (target_read_uint32): New function.
* common/agent.c: Include target/target.h.
[!GDBSERVER]: Don't include target.h.
(helper_thread_id): Type changed to uint32_t.
(agent_get_helper_thread_id): Use target_read_uint32.
(agent_run_command): Always use target_read_memory and
target_write_memory.
(agent_capability): Type changed to uint32_t.
(agent_capability_check): Use target_read_uint32.
gdb/gdbserver/ChangeLog:
* target.h: Include target/target.h.
* target.c (target_read_memory, target_read_uint32)
(target_write_memory): New functions.
This patch fixes hardware breakpoint regressions exposed by my fix for
"PR breakpoints/7143 - Watchpoint does not trigger when first set", at
https://sourceware.org/ml/gdb-patches/2014-03/msg00167.html
The testsuite caught them on Linux/x86_64, at least. gdb.sum:
gdb.sum:
FAIL: gdb.base/hbreak2.exp: next over recursive call
FAIL: gdb.base/hbreak2.exp: backtrace from factorial(5.1)
FAIL: gdb.base/hbreak2.exp: continue until exit at recursive next test
gdb.log:
(gdb) next
Program received signal SIGTRAP, Trace/breakpoint trap.
factorial (value=4) at ../../../src/gdb/testsuite/gdb.base/break.c:113
113 if (value > 1) { /* set breakpoint 7 here */
(gdb) FAIL: gdb.base/hbreak2.exp: next over recursive call
Actually, that patch just exposed a latent issue to "breakpoints
always-inserted off" mode, not really caused it. After that patch,
GDB no longer removes breakpoints at each internal event, thus making
some scenarios behave like breakpoint always-inserted on. The bug is
easy to trigger with always-inserted on.
The issue is that since the target-side breakpoint conditions support,
if the stub/server supports evaluating breakpoint conditions on the
target side, then GDB is sending duplicate Zx packets to the target
without removing them before, and GDBserver is not really expecting
that for Z packets other than Z0/z0. E.g., with "set breakpoint
always-inserted on" and "set debug remote 1":
(gdb) b main
Sending packet: $m410943,1#ff...Packet received: 48
Breakpoint 4 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z0,410943,1#48...Packet received: OK
^^^^^^^^^^^^
(gdb) b main
Note: breakpoint 4 also set at pc 0x410943.
Sending packet: $m410943,1#ff...Packet received: 48
Breakpoint 5 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z0,410943,1#48...Packet received: OK
^^^^^^^^^^^^
(gdb) b main
Note: breakpoints 4 and 5 also set at pc 0x410943.
Sending packet: $m410943,1#ff...Packet received: 48
Breakpoint 6 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z0,410943,1#48...Packet received: OK
^^^^^^^^^^^^
(gdb) del
Delete all breakpoints? (y or n) y
Sending packet: $Z0,410943,1#48...Packet received: OK
Sending packet: $Z0,410943,1#48...Packet received: OK
Sending packet: $z0,410943,1#68...Packet received: OK
And for Z1, similarly:
(gdb) hbreak main
Sending packet: $m410943,1#ff...Packet received: 48
Hardware assisted breakpoint 4 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
Packet Z1 (hardware-breakpoint) is supported
(gdb) hbreak main
Note: breakpoint 4 also set at pc 0x410943.
Sending packet: $m410943,1#ff...Packet received: 48
Hardware assisted breakpoint 5 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
(gdb) hbreak main
Note: breakpoints 4 and 5 also set at pc 0x410943.
Sending packet: $m410943,1#ff...Packet received: 48
Hardware assisted breakpoint 6 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028.
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
(gdb) del
Delete all breakpoints? (y or n) y
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
Sending packet: $Z1,410943,1#49...Packet received: OK
^^^^^^^^^^^^
Sending packet: $z1,410943,1#69...Packet received: OK
^^^^^^^^^^^^
So GDB sent a bunch of Z1 packets, and then when finally removing the
breakpoint, only one z1 packet was sent. On the GDBserver side (with
monitor set debug-hw-points 1), in the Z1 case, we see:
$ ./gdbserver :9999 ./gdbserver
Process ./gdbserver created; pid = 8629
Listening on port 9999
Remote debugging from host 127.0.0.1
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=1 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=2 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=3 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=4 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
insert_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=5 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
remove_watchpoint (addr=410943, len=1, type=instruction-execute):
CONTROL (DR7): 00000101 STATUS (DR6): 00000000
DR0: addr=0x410943, ref.count=4 DR1: addr=0x0, ref.count=0
DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0
That's one insert_watchpoint call for each Z1 packet, and then one
remove_watchpoint call for the z1 packet. Notice how ref.count
increased for each insert_watchpoint call, and then in the end, after
GDB told GDBserver to forget about the hardware breakpoint, GDBserver
ends with the the first debug register still with ref.count=4! IOW,
the hardware breakpoint is left armed on the target, while on the GDB
end it's gone. If the program happens to execute 0x410943 afterwards,
then the CPU traps, GDBserver reports the trap to GDB, and GDB not
having a breakpoint set at that address anymore, reports to the user a
spurious SIGTRAP.
This is exactly what is happening in the hbreak2.exp test, though in
that case, it's a shared library event that triggers a
breakpoint_re_set, when breakpoints are still inserted (because
nowadays GDB doesn't remove breakpoints while handling internal
events), and that recreates breakpoint locations, which likewise
forces breakpoint reinsertion and Zx packet resends...
That is a lot of bogus Zx duplication that should possibly be
addressed on the GDB side. GDB resends Zx packets because the way to
change the target-side condition, is to resend the breakpoint to the
server with the new condition. (That's an option in the packet: e.g.,
"Z1,410943,1;X3,220027" for "hbreak main if 0". The packets in the
examples above are shorter because the breakpoints don't have
conditions attached). GDB doesn't remove the breakpoint first before
reinserting it because that'd be bad for non-stop, as it'd open a
window where the inferior could miss the breakpoint. The conditions
actually haven't changed between the resends, but GDB isn't smart
enough to realize that.
(TBC, if the target doesn't support target-side conditions, then GDB
doesn't trigger these resends (init_bp_location calls
mark_breakpoint_location_modified, and that does nothing if condition
evaluation is on the host side. The resends are caused by the
'loc->condition_changed = condition_modified.' line.)
But, even if GDB was made smarter, GDBserver should really still
handle the resends anyway. So target-side conditions also aren't
really to blame. The documentation of the Z/z packets says:
"To avoid potential problems with duplicate packets, the operations
should be implemented in an idempotent way."
As such, we may want to fix GDB, but we should definitely fix
GDBserver. The fix is a prerequisite for target-side conditions on
hardware breakpoints anyway (and while at it, on watchpoints too).
GDBserver indeed already treats duplicate Z0 packets in an idempotent
way. mem-break.c has the concept of high-level and low-level
breakpoints, somewhat similar to GDB's split of breakpoints vs
breakpoint locations, and keeps track of multiple breakpoints
referencing the same address/location, for the case of an internal
GDBserver breakpoint or a tracepoint being set at the same address as
a GDB breakpoint. But, it only allows GDB to ever contribute one
reference to a software breakpoint location. IOW, if gdbserver sees a
Z0 packet for the same address where it already had a GDB breakpoint
set, then GDBserver won't create another high-level GDB breakpoint.
However, mem-break.c only tracks GDB Z0 breakpoints. The same logic
should apply to all kinds of Zx packets. Currently, gdbserver passes
down each duplicate Zx (other than Z0) request directly to the
target->insert_point routine. The x86 watchpoint support itself
refcounts watchpoint / hw breakpoint requests, to handle overlapping
watchpoints, and save debug registers. But that code doesn't (and
really shouldn't) handle the duplicate requests, assuming that for
each insert there will be a corresponding remove.
So the fix is to generalize mem-break.c to track all kinds of Zx
breakpoints, and filter out duplicates. As mentioned, this ends up
adding support for target-side conditions on hardware breakpoints and
watchpoints too (though GDB itself doesn't support the latter yet).
Probably the least obvious change in the patch is that it kind of
turns the breakpoint insert/remove APIs inside out. Before, the
target methods were only called for GDB breakpoints. The internal
breakpoint set/delete methods inserted memory breakpoints directly
bypassing the insert/remove target methods. That's not good when the
target should use a debug API to set software breakpoints, instead of
relying on GDBserver patching memory with breakpoint instructions, as
is the case of NTO.
Now removal/insertion of all kinds of breakpoints/watchpoints, either
internal, or from GDB, always go through the target methods. The
insert_point/remove_point methods no longer get passed a Z packet
type, but an internal/raw breakpoint type. They're also passed a
pointer to the raw breakpoint itself (note that's still opaque outside
mem-break.c), so that insert_memory_breakpoint /
remove_memory_breakpoint have access to the breakpoint's shadow
buffer. I first tried passing down a new structure based on GDB's
"struct bp_target_info" (actually with that name exactly), but then
decided against it as unnecessary complication.
As software/memory breakpoints work by poking at memory, when setting
a GDB Z0 breakpoint (but not internal breakpoints, as those can assume
the conditions are already right), we need to tell the target to
prepare to access memory (which on Linux means stop threads). If that
operation fails, we need to return error to GDB. Seeing an error, if
this is the first breakpoint of that type that GDB tries to insert,
GDB would then assume the breakpoint type is supported, but it may
actually not be. So we need to check whether the type is supported at
all before preparing to access memory. And to solve that, the patch
adds a new target->supports_z_point_type method that is called before
actually trying to insert the breakpoint.
Other than that, hopefully the change is more or less obvious.
New test added that exercises the hbreak2.exp regression in a more
direct way, without relying on a breakpoint re-set happening before
main is reached.
Tested by building GDBserver for:
aarch64-linux-gnu
arm-linux-gnueabihf
i686-pc-linux-gnu
i686-w64-mingw32
m68k-linux-gnu
mips-linux-gnu
mips-uclinux
nios2-linux-gnu
powerpc-linux-gnu
sh-linux-gnu
tilegx-unknown-linux-gnu
x86_64-redhat-linux
x86_64-w64-mingw32
And also regression tested on x86_64 Fedora 20.
gdb/gdbserver/
2014-05-20 Pedro Alves <palves@redhat.com>
* linux-aarch64-low.c (aarch64_insert_point)
(aarch64_remove_point): No longer check whether the type is
supported here. Adjust to new interface.
(the_low_target): Install aarch64_supports_z_point_type as
supports_z_point_type method.
* linux-arm-low.c (raw_bkpt_type_to_arm_hwbp_type): New function.
(arm_linux_hw_point_initialize): Take an enum raw_bkpt_type
instead of a Z packet char. Adjust.
(arm_supports_z_point_type): New function.
(arm_insert_point, arm_remove_point): Adjust to new interface.
(the_low_target): Install arm_supports_z_point_type.
* linux-crisv32-low.c (cris_supports_z_point_type): New function.
(cris_insert_point, cris_remove_point): Adjust to new interface.
Don't check whether the type is supported here.
(the_low_target): Install cris_supports_z_point_type.
* linux-low.c (linux_supports_z_point_type): New function.
(linux_insert_point, linux_remove_point): Adjust to new interface.
* linux-low.h (struct linux_target_ops) <insert_point,
remove_point>: Take an enum raw_bkpt_type instead of a char. Add
raw_breakpoint pointer parameter.
<supports_z_point_type>: New method.
* linux-mips-low.c (mips_supports_z_point_type): New function.
(mips_insert_point, mips_remove_point): Adjust to new interface.
Use mips_supports_z_point_type.
(the_low_target): Install mips_supports_z_point_type.
* linux-ppc-low.c (the_low_target): Install NULL as
supports_z_point_type method.
* linux-s390-low.c (the_low_target): Install NULL as
supports_z_point_type method.
* linux-sparc-low.c (the_low_target): Install NULL as
supports_z_point_type method.
* linux-x86-low.c (x86_supports_z_point_type): New function.
(x86_insert_point): Adjust to new insert_point interface. Use
insert_memory_breakpoint. Adjust to new
i386_low_insert_watchpoint interface.
(x86_remove_point): Adjust to remove_point interface. Use
remove_memory_breakpoint. Adjust to new
i386_low_remove_watchpoint interface.
(the_low_target): Install x86_supports_z_point_type.
* lynx-low.c (lynx_target_ops): Install NULL as
supports_z_point_type callback.
* nto-low.c (nto_supports_z_point_type): New.
(nto_insert_point, nto_remove_point): Adjust to new interface.
(nto_target_ops): Install nto_supports_z_point_type.
* mem-break.c: Adjust intro comment.
(struct raw_breakpoint) <raw_type, size>: New fields.
<inserted>: Update comment.
<shlib_disabled>: Delete field.
(enum bkpt_type) <gdb_breakpoint>: Delete value.
<gdb_breakpoint_Z0, gdb_breakpoint_Z1, gdb_breakpoint_Z2,
gdb_breakpoint_Z3, gdb_breakpoint_Z4>: New values.
(raw_bkpt_type_to_target_hw_bp_type): New function.
(find_enabled_raw_code_breakpoint_at): New function.
(find_raw_breakpoint_at): New type and size parameters. Use them.
(insert_memory_breakpoint): New function, based off
set_raw_breakpoint_at.
(remove_memory_breakpoint): New function.
(set_raw_breakpoint_at): Reimplement.
(set_breakpoint): New, based on set_breakpoint_at.
(set_breakpoint_at): Reimplement.
(delete_raw_breakpoint): Go through the_target->remove_point
instead of assuming memory breakpoints.
(find_gdb_breakpoint_at): Delete.
(Z_packet_to_bkpt_type, Z_packet_to_raw_bkpt_type): New functions.
(find_gdb_breakpoint): New function.
(set_gdb_breakpoint_at): Delete.
(z_type_supported): New function.
(set_gdb_breakpoint_1): New function, loosely based off
set_gdb_breakpoint_at.
(check_gdb_bp_preconditions, set_gdb_breakpoint): New functions.
(delete_gdb_breakpoint_at): Delete.
(delete_gdb_breakpoint_1): New function, loosely based off
delete_gdb_breakpoint_at.
(delete_gdb_breakpoint): New function.
(clear_gdb_breakpoint_conditions): Rename to ...
(clear_breakpoint_conditions): ... this. Don't handle a NULL
breakpoint.
(add_condition_to_breakpoint): Make static.
(add_breakpoint_condition): Take a struct breakpoint pointer
instead of an address. Adjust.
(gdb_condition_true_at_breakpoint): Rename to ...
(gdb_condition_true_at_breakpoint_z_type): ... this, and add
z_type parameter.
(gdb_condition_true_at_breakpoint): Reimplement.
(add_breakpoint_commands): Take a struct breakpoint pointer
instead of an address. Adjust.
(gdb_no_commands_at_breakpoint): Rename to ...
(gdb_no_commands_at_breakpoint_z_type): ... this. Add z_type
parameter. Return true if no breakpoint was found. Change debug
output.
(gdb_no_commands_at_breakpoint): Reimplement.
(run_breakpoint_commands): Rename to ...
(run_breakpoint_commands_z_type): ... this. Add z_type parameter,
and change return type to boolean.
(run_breakpoint_commands): New function.
(gdb_breakpoint_here): Also check for Z1 breakpoints.
(uninsert_raw_breakpoint): Don't try to reinsert a disabled
breakpoint. Go through the_target->remove_point instead of
assuming memory breakpoint.
(uninsert_breakpoints_at, uninsert_all_breakpoints): Uninsert
software and hardware breakpoints.
(reinsert_raw_breakpoint): Go through the_target->insert_point
instead of assuming memory breakpoint.
(reinsert_breakpoints_at, reinsert_all_breakpoints): Reinsert
software and hardware breakpoints.
(check_breakpoints, breakpoint_here, breakpoint_inserted_here):
Check both software and hardware breakpoints.
(validate_inserted_breakpoint): Assert the breakpoint is a
software breakpoint. Set the inserted flag to -1 instead of
setting shlib_disabled.
(delete_disabled_breakpoints): Adjust.
(validate_breakpoints): Only validate software breakpoints.
Adjust to inserted flag change.
(check_mem_read, check_mem_write): Skip breakpoint types other
than software breakpoints. Adjust to inserted flag change.
* mem-break.h (enum raw_bkpt_type): New enum.
(raw_breakpoint, struct process_info): Forward declare.
(Z_packet_to_target_hw_bp_type): Delete declaration.
(raw_bkpt_type_to_target_hw_bp_type, Z_packet_to_raw_bkpt_type)
(set_gdb_breakpoint, delete_gdb_breakpoint)
(clear_breakpoint_conditions): New declarations.
(set_gdb_breakpoint_at, clear_gdb_breakpoint_conditions): Delete.
(breakpoint_inserted_here): Update comment.
(add_breakpoint_condition, add_breakpoint_commands): Replace
address parameter with a breakpoint pointer parameter.
(gdb_breakpoint_here): Update comment.
(delete_gdb_breakpoint_at): Delete.
(insert_memory_breakpoint, remove_memory_breakpoint): Declare.
* server.c (process_point_options): Take a struct breakpoint
pointer instead of an address. Adjust.
(process_serial_event) <Z/z packets>: Use set_gdb_breakpoint and
delete_gdb_breakpoint.
* spu-low.c (spu_target_ops): Install NULL as
supports_z_point_type method.
* target.h: Include mem-break.h.
(struct target_ops) <prepare_to_access_memory>: Update comment.
<supports_z_point_type>: New field.
<insert_point, remove_point>: Take an enum raw_bkpt_type argument
instead of a char. Also take a raw breakpoint pointer.
* win32-arm-low.c (the_low_target): Install NULL as
supports_z_point_type.
* win32-i386-low.c (i386_supports_z_point_type): New function.
(i386_insert_point, i386_remove_point): Adjust to new interface.
(the_low_target): Install i386_supports_z_point_type.
* win32-low.c (win32_supports_z_point_type): New function.
(win32_insert_point, win32_remove_point): Adjust to new interface.
(win32_target_ops): Install win32_supports_z_point_type.
* win32-low.h (struct win32_target_ops):
<supports_z_point_type>: New method.
<insert_point, remove_point>: Take an enum raw_bkpt_type argument
instead of a char. Also take a raw breakpoint pointer.
gdb/testsuite/
2014-05-20 Pedro Alves <palves@redhat.com>
* gdb.base/break-idempotent.c: New file.
* gdb.base/break-idempotent.exp: New file.
This adds a "self" argument to to_supports_btrace. Due to how one
implementation of this method is shared with gdbserver this required a
small change to gdbserver as well.
2014-02-19 Tom Tromey <tromey@redhat.com>
* common/linux-btrace.c (linux_supports_btrace): Add "ops"
argument.
* common/linux-btrace.h (linux_supports_btrace): Update.
* remote.c (remote_supports_btrace): Add "self" argument.
* target-delegates.c: Rebuild.
* target.c (target_supports_btrace): Remove.
* target.h (struct target_ops) <to_supports_btrace>: Add
target_ops argument.
(target_supports_btrace): New define.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <supports_btrace>: Add target_ops
argument.
(target_supports_btrace): Update.
Read branch trace data incrementally and extend the current trace rather than
discarding it and reading the entire trace buffer each time.
If the branch trace buffer overflowed, we can't extend the current trace so we
discard it and start anew by reading the entire branch trace buffer.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
Support delta reads.
(linux_disable_btrace): Change return type.
* common/linux-btrace.h (linux_read_btrace): Change parameters
and return type to allow error reporting. Update users.
(linux_disable_btrace): Change return type. Update users.
* common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
New.
(btrace_error): New.
(btrace_block) <begin>: Comment on BEGIN == 0.
* btrace.c (btrace_compute_ftrace): Start from the end of
the current trace.
(btrace_stitch_trace, btrace_clear_history): New.
(btrace_fetch): Read delta trace, return if replaying.
(btrace_clear): Move clear history code to btrace_clear_history.
(parse_xml_btrace): Throw an error if parsing failed.
* target.h (struct target_ops) <to_read_btrace>: Change parameters
and return type to allow error reporting.
(target_read_btrace): Change parameters and return type to allow
error reporting.
* target.c (target_read_btrace): Update.
* remote.c (remote_read_btrace): Support delta reads. Pass
errors on.
* NEWS: Announce it.
gdbserver/
* target.h (target_ops) <read_btrace>: Change parameters and
return type to allow error reporting.
* server.c (handle_qxfer_btrace): Support delta reads. Pass
trace reading errors on.
* linux-low.c (linux_low_read_btrace): Pass trace reading
errors on.
(linux_low_disable_btrace): New.
* Makefile.in (SFILES): Remove common/target-common.c and
add target/waitstatus.c.
(HFILES_NO_SRCDIR): Remove common/target-common.h and add
target/resume.h, target/wait.h and target/waitstatus.h.
(COMMON_OBS): Remove target-common.o and add
waitstatus.o.
(target-common.o): Remove.
(waitstatus.o): New target object file.
* common/target-common.c: Move contents to
target/waitstatus.c and remove.
* common/target-common.h: Move contents to other files and
remove.
(enum resume_kind: Move to target/resume.h.
(TARGET_WNOHANG): Move to target/wait.h.
(enum target_waitkind): Move to target/waitstatus.h.
(struct target_waitstatus): Likewise.
* target.h: Do not include target-common.h and
include target/resume.h, target/wait.h and
target/waitstatus.h.
* target/resume.h: New file.
* target/wait.h: New file.
* target/waitstatus.h: New file.
* target/waitstatus.c: New file.
gdb/gdbserver/
* Makefile.in (INCLUDE_CFLAGS): Include -I$(srcdir)/../.
(SFILES): Remove $(srcdir)/common/target-common.c and
add $(srcdir)/target/waitstatus.c.
(OBS): Remove target-common.o and add waitstatus.o.
(server_h): Remove $(srcdir)/../common/target-common.h and
add $(srcdir)/../target/resume.h, $(srcdir)/../target/wait.h
and $(srcdir)/../target/waitstatus.h.
(target-common.o): Remove.
(waitstatus.o): New target object file.
* target.h: Do not include target-common.h and
include target/resume.h, target/wait.h and
target/waitstatus.h.
This patch adds support for range stepping to GDBserver, teaching it
about vCont;r.
It'd be easy to enable this for all hardware single-step targets
without needing the linux_target_ops hook, however, at least PPC needs
special care, due to the fact that PPC atomic sequences can't be
hardware single-stepped through, a thing which GDBserver doesn't know
about. So this leaves the support limited to x86/x86_64.
gdb/
2013-05-23 Pedro Alves <palves@redhat.com>
* NEWS: Mention GDBserver range stepping support.
gdb/gdbserver/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* linux-low.c (lwp_in_step_range): New function.
(linux_wait_1): If the thread was range stepping and stopped
outside the stepping range, report the stop to GDB. Otherwise,
continue stepping. Add range stepping debug output.
(linux_set_resume_request): Copy the step range from the resume
request to the lwp.
(linux_supports_range_stepping): New.
(linux_target_ops) <supports_range_stepping>: Set to
linux_supports_range_stepping.
* linux-low.h (struct linux_target_ops)
<supports_range_stepping>: New field.
(struct lwp_info) <step_range_start, step_range_end>: New fields.
* linux-x86-low.c (x86_supports_range_stepping): New.
(the_low_target) <supports_range_stepping>: Set to
x86_supports_range_stepping.
* server.c (handle_v_cont): Handle 'r' action.
(handle_v_requests): Append ";r" if the target supports range
stepping.
* target.h (struct thread_resume) <step_range_start,
step_range_end>: New fields.
(struct target_ops) <supports_range_stepping>:
New field.
(target_supports_range_stepping): New macro.
We define the following packets:
Qbtrace:bts enable branch tracing for the current thread
returns "OK" or "Enn"
Qbtrace:off disable branch tracing for the current thread
returns "OK" or "Enn"
qXfer:btrace:read read the full branch trace data for the current thread
gdb/
* target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
* remote.c: Include btrace.h.
(struct btrace_target_info): New struct.
(remote_supports_btrace): New function.
(send_Qbtrace): New function.
(remote_enable_btrace): New function.
(remote_disable_btrace): New function.
(remote_teardown_btrace): New function.
(remote_read_btrace): New function.
(init_remote_ops): Add btrace ops.
(enum <unnamed>): Add btrace packets.
(struct protocol_feature remote_protocol_features[]): Add btrace packets.
(_initialize_remote): Add packet configuration for branch tracing.
gdbserver/
* target.h (struct target_ops): Add btrace ops.
(target_supports_btrace): New macro.
(target_enable_btrace): New macro.
(target_disable_btrace): New macro.
(target_read_btrace): New macro.
* gdbthread.h (struct thread_info): Add btrace field.
* server.c: Include btrace-common.h.
(handle_btrace_general_set): New function.
(handle_btrace_enable): New function.
(handle_btrace_disable): New function.
(handle_general_set): Call handle_btrace_general_set.
(handle_qxfer_btrace): New function.
(struct qxfer qxfer_packets[]): Add btrace entry.
* inferiors.c (remove_thread): Disable btrace.
* linux-low: Include linux-btrace.h.
(linux_low_enable_btrace): New function.
(linux_low_read_btrace): New function.
(linux_target_ops): Add btrace ops.
* configure.srv (i[34567]86-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
(x86_64-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
* configure.ac: Define HAVE_LINUX_BTRACE.
* config.in: Regenerated.
* configure: Regenerated.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Kwok Cheung Yeung <kcy@codesourcery.com>
* NEWS: Document shorter fast tracepoints and qTMinFTPILen packet.
* i386-tdep.c (i386_fast_tracepoint_valid_at): Query target for
the minimum instruction size for fast tracepoints.
* target.h (struct target_ops): Add new method
to_get_min_fast_tracepoint_insn_len.
(target_get_min_fast_tracepoint_insn_len): New.
* target.c (update_current_target): Set up new target operation.
* remote.c (remote_write_bytes_aux): Fix typo.
(remote_get_min_fast_tracepoint_insn_len): New.
(init_remote_ops): Initialize new field.
* gdb.texinfo (Create and Delete Tracepoints): Describe what is
needed to get shorter fast tracepoints.
(Tracepoint Packets): Document new qTMinFTPILen packet.
* linux-x86-low.c (small_jump_insn): New.
(i386_install_fast_tracepoint_jump_pad): Add arguments for
trampoline and error message, build a trampoline and issue a small
jump instruction to it.
(x86_install_fast_tracepoint_jump_pad): Add arguments for
trampoline and error message.
(x86_get_min_fast_tracepoint_insn_len): New.
(the_low_target): Add call to x86_get_min_fast_tracepoint_insn_len.
* linux-low.h (struct linux_target_ops): Add arguments to
install_fast_tracepoint_jump_pad operation, add new operation.
* linux-low.c (linux_install_fast_tracepoint_jump_pad): Add
arguments.
(linux_get_min_fast_tracepoint_insn_len): New function.
(linux_target_op): Add new operation.
* tracepoint.c (gdb_trampoline_buffer): New IPA variable.
(gdb_trampoline_buffer_end): Ditto.
(gdb_trampoline_buffer_error): Ditto.
(struct ipa_sym_addresses): Add fields for new IPA variables.
(symbol_list): Add entries for new IPA variables.
(struct tracepoint): Add fields to hold the address range of the
trampoline used by the tracepoint.
(trampoline_buffer_head): New static variable.
(trampoline_buffer_tail): Ditto.
(claim_trampoline_space): New function.
(have_fast_tracepoint_trampoline_buffer): New function.
(clone_fast_tracepoint): Fill in trampoline fields of tracepoint
structure.
(install_fast_tracepoint): Ditto, also add error buffer argument.
(cmd_qtminftpilen): New function.
(handle_tracepoint_query): Add response to qTMinFTPILen packet.
(fast_tracepoint_from_trampoline_address): New function.
(fast_tracepoint_collecting): Handle trampoline as part of jump
pad space.
(set_trampoline_buffer_space): New function.
(initialize_tracepoint): Initialize new IPA variables.
* target.h (struct target_ops): Add arguments to
install_fast_tracepoint_jump_pad operation, add new
get_min_fast_tracepoint_insn_len operation.
(target_get_min_fast_tracepoint_insn_len): New.
(install_fast_tracepoint_jump_pad): Add arguments.
* server.h (IPA_BUFSIZ): Define.
* linux-i386-ipa.c: Include extra header files.
(initialize_fast_tracepoint_trampoline_buffer): New function.
(initialize_low_tracepoint): Call it.
* server.h (set_trampoline_buffer_space): Declare.
(claim_trampoline_space): Ditto.
(have_fast_tracepoint_trampoline_buffer): Ditto.
* gdb.trace/ftrace.c: New.
* gdb.trace/ftrace.exp: New.
* infrun.c (disable_randomization): New global variable.
(show_disable_randomization): New function.
(set_disable_randomization): Likewise.
(_initialize_infrun): Install set/show disable-randomization
commands.
* linux-nat.c (disable_randomization): Remove.
(show_disable_randomization): Likewise.
(set_disable_randomization): Likewise.
(_initialize_linux_nat): No longer install set/show
disable-randomization commands here.
(linux_nat_supports_disable_randomization): New function.
(linux_nat_add_target): Install it.
* remote.c (PACKET_QDisableRandomization): New enum value.
(remote_protocol_packets): Support QDisableRandomization.
(_initialize_remote): Likewise.
(remote_supports_disable_randomization): New function.
(init_remote_ops): Install it.
(extended_remote_supports_disable_randomization): New function.
(init_extended_remote_ops): Install it.
(extended_remote_disable_randomization): New function.
(extended_remote_create_inferior_1): Call it.
* target.h (struct target_ops): Add to_supports_disable_randomization.
(target_supports_disable_randomization): Add prototype.
* target.c (target_supports_disable_randomization): New function.
(find_default_supports_disable_randomization): Likewise.
(init_dummy_target): Install it.
doc/
* gdb.texinfo (Starting your Program): "set disable-randomization"
is no longer Linux-specific.
(Remote Configuration): Document "set remote
disable-randomization-packet".
(General Query Packets): Document "QDisableRandomization" packet
and add it to "qSupported" list.
gdbserver/
* configure.ac: Check support for personality routine.
* configure: Regenerate.
* config.in: Likewise.
* linux-low.c: Include <sys/personality.h>.
Define ADDR_NO_RANDOMIZE if necessary.
(linux_create_inferior): Disable address space randomization when
forking inferior, if requested.
(linux_supports_disable_randomization): New function.
(linux_target_ops): Install it.
* server.h (disable_randomization): Declare.
* server.c (disable_randomization): New global variable.
(handle_general_set): Handle QDisableRandomization.
(handle_query): Likewise for qSupported.
(main): Support --disable-randomization and --no-disable-randomization
command line arguments.
* target.h (struct target_ops): Add supports_disable_randomization.
(target_supports_disable_randomization): New macro.
(status_pending_p_callback): Remove redundant statement. Check
for !TARGET_WAITIKIND_IGNORE, instead of
TARGET_WAITKIND_STOPPED.
(handle_tracepoints): Make sure LWP is locked. Adjust.
(linux_wait_for_event_1): Adjust.
(linux_cancel_breakpoints): New.
(unsuspend_one_lwp): New.
(unsuspend_all_lwps): New.
(linux_wait_1): If finishing a step-over, unsuspend all lwps.
(send_sigstop_callback): Change return type to int, add new
`except' parameter and handle it.
(suspend_and_send_sigstop_callback): New.
(stop_all_lwps): Add new `suspend' and `expect' parameters, and
pass them down. If SUSPEND, also increment the lwp's suspend
count.
(linux_resume_one_lwp): Add notice about resuming a suspended LWP.
(need_step_over_p): Don't consider suspended LWPs.
(start_step_over): Adjust.
(proceed_one_lwp): Change return type to int, add new `except'
parameter and handle it.
(unsuspend_and_proceed_one_lwp): New.
(proceed_all_lwps): Use find_inferior instead of
for_each_inferior.
(unstop_all_lwps): Add `unsuspend' parameter. If UNSUSPEND, them
also decrement the suspend count of LWPs. Pass `except' down,
instead of hacking its suspend count.
(linux_pause_all): Add `freeze' parameter. Adjust.
(linux_unpause_all): New.
(linux_target_ops): Install linux_unpause_all.
* server.c (handle_status): Adjust.
* target.h (struct target_ops): New fields `unpause_all' and
`cancel_breakpoints'. Add new parameter to `pause_all'.
(pause_all): Add new `freeze' parameter.
(unpause_all): New.
(cancel_breakpoints): New.
* tracepoint.c (clear_installed_tracepoints): Pause threads, and
cancel breakpoints.
(cmd_qtstart): Pause threads.
(stop_tracing): Pause threads, and cancel breakpoints.
* win32-low.c (win32_target_ops): Adjust.
* NEWS: Document new feature.
* remote.c (PACKET_qGetTIBAddr): New enum element.
(remote_get_tib_address): New function.
(init_remote_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_remote): Add add_packet_config_cmd
for PACKET_qGetTIBAddr.
* target.c (update_current_target): Set default value for
new to_get_tib_address field.
* target.h (target_ops): New field to_get_tib_address.
(target_get_tib_address): New macro.
* windows-nat.c (thread_info): Add thread_local_base field.
(windows_add_thread): Add tlb argument of type 'void *'.
(fake_create_process): Adapt windows_add_thread call.
(get_windows_debug_event): Idem.
(windows_get_tib_address): New function.
(init_windows_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_windows_nat): Replace info_w32_cmdlist
initialization by a call to init_w32_command_list.
(info_w32_command, info_w32_cmdlist): Removed from here...
to windows-tdep.c file.
* windows-tdep.h (info_w32_cmdlist): Declare.
(init_w32_command_list): New external function
declaration.
* windows-tdep.c: Add several headers.
(info_w32_cmdlist): to here, made global.
(thread_information_32): New struct.
(thread_information_64): New struct.
(TIB_NAME): New char array.
(MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants.
(maint_display_all_tib): New static variable.
(windows_get_tlb_type): New function.
(tlb_value_read, tlb_value_write): New functions.
(tlb_value_funcs): New static struct.
(tlb_make_value): New function.
(display_one_tib): New function.
(display_tib): New function.
(show_maint_show_all_tib):New function.
(info_w32_command): Moved from windows-nat.c.
(init_w32_command_list): New function.
(_initialize_windows_tdep): New function.
New "maint set/show show-all-tib" command
New "$_tlb" internal variable.
gdbserver/ChangeLog entry:
* server.c (handle_query): Handle 'qGetTIBAddr' query.
* target.h (target_ops): New get_tib_address field.
* win32-low.h (win32_thread_info): Add thread_local_base field.
* win32-low.c (child_add_thread): Add tlb argument.
Set thread_local_base field to TLB.
(get_child_debug_event): Adapt to child_add_thread change.
(win32_get_tib_address): New function.
(win32_target_ops): Set get_tib_address field to
win32_get_tib_address.
* linux-low.c (linux_target_ops): Set get_tib_address field to NULL.
doc/ChangeLog entry:
gdb.texinfo ($_tlb): Document new automatic convinience variable.
(info w32 thread-information-block): Document new command.
(qGetTIBAddress): Document new gdbserver query.
(maint set/show show-all-tib): Document new command.
* linux-low.c (linux_remove_process): Delete.
(add_lwp): Don't set last_resume_kind here.
(linux_kill): Use `mourn'.
(linux_detach): Use `thread_db_detach', and `mourn'.
(linux_mourn): New.
(linux_attach_lwp_1): Adjust comment.
(linux_attach): last_resume_kind moved the thread_info; adjust.
(status_pending_p_callback): Adjust.
(linux_wait_for_event_1): Adjust.
(count_events_callback, select_singlestep_lwp_callback)
(select_event_lwp_callback, cancel_breakpoints_callback)
(db_wants_lwp_stopped, linux_wait_1, need_step_over_p)
(proceed_one_lwp): Adjust.
(linux_async): Add debug output.
(linux_thread_stopped): New.
(linux_pause_all): New.
(linux_target_ops): Install linux_mourn, linux_thread_stopped and
linux_pause_all.
* linux-low.h (struct lwp_info): Delete last_resume_kind field.
(thread_db_free): Delete declaration.
(thread_db_detach, thread_db_mourn): Declare.
* thread-db.c (thread_db_init): Use thread_db_mourn.
(thread_db_free): Delete, split in two.
(disable_thread_event_reporting): New.
(thread_db_detach): New.
(thread_db_mourn): New.
* server.h (struct thread_info) <last_resume_kind>: New field.
<attached>: Add comment.
<gdb_detached>: New field.
(handler_func): Change return type to int.
(handle_serial_event, handle_target_event): Ditto.
(gdb_connected): Declare.
(tracing): Delete.
(disconnected_tracing): Declare.
(stop_tracing): Declare.
* server.c (handle_query) <qSupported>: Report support for
disconnected tracing.
(queue_stop_reply_callback): Account for running threads.
(gdb_wants_thread_stopped): New.
(gdb_wants_all_threads_stopped): New.
(gdb_reattached_process): New.
(handle_status): Clear the `gdb_detached' flag of all processes.
In all-stop, stop all threads.
(main): Be sure to leave tfind mode. Handle disconnected tracing.
(process_serial_event): If the remote connection breaks, or if an
exit was forced with "monitor exit", force an event loop exit.
Handle disconnected tracing on detach.
(handle_serial_event): Adjust.
(handle_target_event): If GDB isn't connected, forward events back
to the inferior, unless the last process exited, in which case,
exit gdbserver. Adjust interface.
* remote-utils.c (remote_open): Don't block in accept. Instead
register an event loop source on the listen socket file
descriptor. Refactor bits into ...
(listen_desc): ... this new global.
(gdb_connected): ... this new function.
(enable_async_notification): ... this new function.
(handle_accept_event): ... this new function.
(remote_close): Clear remote_desc.
* inferiors.c (add_thread): Set the new thread's last_resume_kind.
* target.h (struct target_ops) <mourn, thread_stopped, pause_all>:
New fields.
(mourn_inferior): Define.
(target_process_qsupported): Avoid the dangling else problem.
(thread_stopped): Define.
(pause_all): Define.
(target_waitstatus_to_string): Declare.
* target.c (target_waitstatus_to_string): New.
* tracepoint.c (tracing): Make extern.
(disconnected_tracing): New.
(stop_tracing): Make extern. Handle tracing stops due to GDB
disconnecting.
(cmd_qtdisconnected): New.
(cmd_qtstatus): Report disconnected tracing status in trace reply.
(handle_tracepoint_general_set): Handle QTDisconnected.
* event-loop.c (event_handler_func): Change return type to int.
(process_event): Bail out if the event handler wants the event
loop to stop.
(handle_file_event): Ditto.
(start_event_loop): Bail out if the event handler wants the event
loop to stop.
* nto-low.c (nto_target_ops): Adjust.
* spu-low.c (spu_wait): Don't remove the process here.
(spu_target_ops): Adjust.
* win32-low.c (win32_wait): Don't remove the process here.
(win32_target_ops): Adjust.
Pedro Alves <pedro@codesourcery.com>
* target.h (struct target_ops) <supports_multi_process>: New
callback.
(target_supports_multi_process): New.
* server.c (handle_query): Even if GDB reports support, only
enable multi-process if the target also supports it. Report
multi-process support only if the target backend supports it.
* linux-low.c (linux_supports_multi_process): New function.
(linux_target_ops): Install it as target_supports_multi_process
callback.
Implement the multiprocess extensions, and add linux multiprocess
support.
* server.h (ULONGEST): Declare.
(struct ptid, ptid_t): New.
(minus_one_ptid, null_ptid): Declare.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
(ptid_get_tid, ptid_equal, ptid_is_pid): Declare.
(struct inferior_list_entry): Change `id' type from unsigned from
to ptid_t.
(struct sym_cache, struct breakpoint, struct
process_info_private): Forward declare.
(struct process_info): Declare.
(current_process): Declare.
(all_processes): Declare.
(initialize_inferiors): Declare.
(add_thread): Adjust to use ptid_t.
(thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id): Ditto.
(add_process, remove_process, find_thread_pid): Declare.
(find_inferior_id): Adjust to use ptid_t.
(cont_thread, general_thread, step_thread): Change type to ptid_t.
(multi_process): Declare.
(push_event): Adjust to use ptid_t.
(read_ptid, write_ptid): Declare.
(prepare_resume_reply): Adjust to use ptid_t.
(clear_symbol_cache): Declare.
* inferiors.c (all_processes): New.
(null_ptid, minus_one_ptid): New.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
(ptid_get_tid, ptid_equal, ptid_is_pid): New.
(add_thread): Change unsigned long to ptid. Remove gdb_id
parameter. Adjust.
(thread_id_to_gdb_id, thread_to_gdb_id): Change unsigned long to ptid.
(gdb_id_to_thread): Rename to ...
(find_thread_pid): ... this. Change unsigned long to ptid.
(gdb_id_to_thread_id, find_inferior_id): Change unsigned long to ptid.
(loaded_dll, pull_pid_from_list): Adjust.
(add_process, remove_process, find_process_pid)
(get_thread_process, current_process, initialize_inferiors): New.
* target.h (struct thread_resume) <thread>: Change type to ptid_t.
(struct target_waitstatus) <related_pid>: Ditto.
(struct target_ops) <kill, detach>: Add `pid' argument. Change
return type to int.
(struct target_ops) <join>: Add `pid' argument.
(struct target_ops) <thread_alive>: Change pid's type to ptid_t.
(struct target_ops) <wait>: Add `ptid' field. Change return type
to ptid.
(kill_inferior, detach_inferior, join_inferior): Add `pid' argument.
(mywait): Add `ptid' argument. Change return type to ptid_t.
(target_pid_to_str): Declare.
* target.c (set_desired_inferior): Adjust to use ptids.
(mywait): Add new `ptid' argument. Adjust.
(target_pid_to_str): New.
* mem-break.h (free_all_breakpoints): Declare.
* mem-break.c (breakpoints): Delelete.
(set_breakpoint_at, delete_breakpoint, find_breakpoint_at)
(check_mem_read, check_mem_write, delete_all_breakpoints): Adjust
to use per-process breakpoint list.
(free_all_breakpoints): New.
* remote-utils.c (struct sym_cache) <name>: Drop `const'.
(symbol_cache, all_symbols_looked_up): Delete.
(hexchars): New.
(ishex, unpack_varlen_hex, write_ptid, hex_or_minus_one,
read_ptid): New.
(prepare_resume_reply): Change ptid argument's type from unsigned
long to ptid_t. Adjust. Implement W;process and X;process.
(free_sym_cache, clear_symbol_cache): New.
(look_up_one_symbol): Adjust to per-process symbol cache. *
* server.c (cont_thread, general_thread, step_thread): Change type
to ptid_t.
(attached): Delete.
(multi_process): New.
(last_ptid): Change type to ptid_t.
(struct vstop_notif) <ptid>: Change type to ptid_t.
(queue_stop_reply, push_event): Change `ptid' argument's type to
ptid_t.
(discard_queued_stop_replies): Add `pid' argument.
(start_inferior): Adjust to use ptids. Adjust to mywait interface
changes. Don't reference the `attached' global.
(attach_inferior): Adjust to mywait interface changes.
(handle_query): Adjust to use ptids. Parse GDB's qSupported
features. Handle and report "multiprocess+". Handle
"qAttached:PID".
(handle_v_cont): Adjust to use ptids. Adjust to mywait interface
changes.
(handle_v_kill): New.
(handle_v_stopped): Adjust to use target_pid_to_str.
(handle_v_requests): Allow multiple attaches and runs when
multiprocess extensions are in effect. Handle "vKill".
(myresume): Adjust to use ptids.
(queue_stop_reply_callback): Add `arg' parameter. Handle it.
(handle_status): Adjust to discard_queued_stop_replies interface
change.
(first_thread_of, kill_inferior_callback)
(detach_or_kill_inferior_callback, join_inferiors_callback): New.
(main): Call initialize_inferiors. Adjust to use ptids, killing
and detaching from all inferiors. Handle multiprocess packet
variants.
* linux-low.h: Include gdb_proc_service.h.
(struct process_info_private): New.
(struct linux_target_ops) <pid_of>: Use ptid_get_pid.
<lwpid_of>: Use ptid_get_lwp.
(get_lwp_thread): Adjust.
(struct lwp_info): Add `dead' member.
(find_lwp_pid): Declare.
* linux-low.c (thread_db_active): Delete.
(new_inferior): Adjust comment.
(inferior_pid): Delete.
(linux_add_process): New.
(handle_extended_wait): Adjust.
(add_lwp): Change unsigned long to ptid.
(linux_create_inferior): Add process to processes table. Adjust
to use ptids. Don't set new_inferior here.
(linux_attach_lwp): Rename to ...
(linux_attach_lwp_1): ... this. Add `initial' argument. Handle
it. Adjust to use ptids.
(linux_attach_lwp): New.
(linux_attach): Add process to processes table. Don't set
new_inferior here.
(struct counter): New.
(second_thread_of_pid_p, last_thread_of_process_p): New.
(linux_kill_one_lwp): Add `args' parameter. Handle it. Adjust to
multiple processes.
(linux_kill): Add `pid' argument. Handle it. Adjust to multiple
processes. Remove process from process table.
(linux_detach_one_lwp): Add `args' parameter. Handle it. Adjust
to multiple processes.
(any_thread_of): New.
(linux_detach): Add `pid' argument, and handle it. Remove process
from processes table.
(linux_join): Add `pid' argument. Handle it.
(linux_thread_alive): Change unsighed long argument to ptid_t.
Consider dead lwps as not being alive.
(status_pending_p): Rename `dummy' argument to `arg'. Filter out
threads we're not interested in.
(same_lwp, find_lwp_pid): New.
(linux_wait_for_lwp): Change `pid' argument's type from int to
ptid_t. Adjust.
(linux_wait_for_event): Rename to ...
(linux_wait_for_event_1): ... this. Change `pid' argument's type
from int to ptid_t. Adjust.
(linux_wait_for_event): New.
(linux_wait_1): Add `ptid' argument. Change return type to
ptid_t. Adjust. Use last_thread_of_process_p. Remove processes
that exit from the process table.
(linux_wait): Add `ptid' argument. Change return type to ptid_t.
Adjust.
(mark_lwp_dead): New.
(wait_for_sigstop): Adjust to use ptids. If a process exits while
stopping all threads, mark its main lwp as dead.
(linux_set_resume_request, linux_resume_one_thread): Adjust to use
ptids.
(fetch_register, usr_store_inferior_registers)
(regsets_fetch_inferior_registers)
(regsets_store_inferior_registers, linux_read_memory)
(linux_write_memory): Inline `inferior_pid'.
(linux_look_up_symbols): Adjust to use per-process
`thread_db_active'.
(linux_request_interrupt): Adjust to use ptids.
(linux_read_auxv): Inline `inferior_pid'.
(initialize_low): Don't reference thread_db_active.
* gdb_proc_service.h (struct ps_prochandle) <pid>: Remove.
* proc-service.c (ps_lgetregs): Use find_lwp_pid.
(ps_getpid): Return the pid of the current inferior.
* thread-db.c (proc_handle, thread_agent): Delete.
(thread_db_create_event, thread_db_enable_reporting): Adjust to
per-process data.
(find_one_thread): Change argument type to ptid_t. Adjust to
per-process data.
(maybe_attach_thread): Adjust to per-process data and ptids.
(thread_db_find_new_threads): Ditto.
(thread_db_init): Ditto.
* spu-low.c (spu_create_inferior, spu_attach): Add process to
processes table. Adjust to use ptids.
(spu_kill, spu_detach): Adjust interface. Remove process from
processes table.
(spu_join, spu_thread_alive): Adjust interface.
(spu_wait): Adjust interface. Remove process from processes
table. Adjust to use ptids.
* win32-low.c (current_inferior_tid): Delete.
(current_inferior_ptid): New.
(debug_event_ptid): New.
(thread_rec): Take a ptid. Adjust.
(child_add_thread): Add `pid' argument. Adjust to use ptids.
(child_delete_thread): Ditto.
(do_initial_child_stuff): Add `attached' argument. Add process to
processes table.
(child_fetch_inferior_registers, child_store_inferior_registers):
Adjust.
(win32_create_inferior): Pass 0 to do_initial_child_stuff.
(win32_attach): Pass 1 to do_initial_child_stuff.
(win32_kill): Adjust interface. Remove process from processes
table.
(win32_detach): Ditto.
(win32_join): Adjust interface.
(win32_thread_alive): Take a ptid.
(win32_resume): Adjust to use ptids.
(get_child_debug_event): Ditto.
(win32_wait): Adjust interface. Remove exiting process from
processes table.
* server.h (non_stop): Declare.
(gdb_client_data, handler_func): Declare.
(delete_file_handler, add_file_handler, start_event_loop):
Declare.
(handle_serial_event, handle_target_event, push_event)
(putpkt_notif): Declare.
* target.h (enum resume_kind): New.
(struct thread_resume): Replace `step' field by `kind' field.
(TARGET_WNOHANG): Define.
(struct target_ops) <wait>: Add `options' argument.
<supports_non_stop, async, start_non_stop>: New fields.
(target_supports_non_stop, target_async): New.
(start_non_stop): Declare.
(mywait): Add `options' argument.
* target.c (mywait): Add `options' argument. Print child exit
notifications here.
(start_non_stop): New.
* server.c (non_stop, own_buf, mem_buf): New globals.
(struct vstop_notif): New.
(notif_queue): New global.
(queue_stop_reply, push_event, discard_queued_stop_replies)
(send_next_stop_reply): New.
(start_inferior): Adjust to use resume_kind. Adjust to mywait
interface changes.
(attach_inferior): In non-stop mode, don't wait for the target
here.
(handle_general_set): Handle QNonStop.
(handle_query): When handling qC, return the current general
thread, instead of the first thread of the list.
(handle_query): If the backend supports non-stop mode, include
QNonStop+ in the qSupported query response.
(handle_v_cont): Adjust to use resume_kind. Handle resume_stop
and non-stop mode.
(handle_v_attach, handle_v_run): Handle non-stop mode.
(handle_v_stopped): New.
(handle_v_requests): Report support for vCont;t. Handle vStopped.
(myresume): Adjust to use resume_kind. Handle non-stop.
(queue_stop_reply_callback): New.
(handle_status): Handle non-stop mode.
(main): Clear non_stop flag on reconnection. Use the event-loop.
Refactor serial protocol handling from here ...
(process_serial_event): ... to this new function. When GDB
selects any thread, select one here. In non-stop mode, wait until
GDB acks all pending events before exiting.
(handle_serial_event, handle_target_event): New.
* remote-utils.c (remote_open): Install remote_desc in the event
loop.
(remote_close): Remove remote_desc from the event loop.
(putpkt_binary): Rename to...
(putpkt_binary_1): ... this. Add `is_notic' argument. Handle it.
(putpkt_binary): New as wrapper around putpkt_binary_1.
(putpkt_notif): New.
(prepare_resume_reply): In non-stop mode, don't change the
general_thread.
* event-loop.c: New.
* Makefile.in (OBJ): Add event-loop.o.
(event-loop.o): New rule.
* linux-low.h (pid_of): Moved here.
(lwpid_of): New.
(get_lwp_thread): Use lwpid_of.
(struct lwp_info): Delete `lwpid' field. Add `suspended' field.
* linux-low.c (pid_of): Delete.
(inferior_pid): Use lwpid_of.
(linux_event_pipe): New.
(target_is_async_p): New.
(delete_lwp): New.
(handle_extended_wait): Use lwpid_of.
(add_lwp): Don't set lwpid field.
(linux_attach_lwp): Adjust debug output. Use lwpid_of.
(linux_kill_one_lwp): If killing a running lwp, stop it first.
Use lwpid_of. Adjust to linux_wait_for_event interface changes.
(linux_detach_one_lwp): If detaching from a running lwp, stop it
first. Adjust to linux_wait_for_event interface changes. Use
lwpid_of.
(linux_detach): Don't delete the main lwp here.
(linux_join): Use my_waitpid. Avoid signal_pid. Use lwpid_of.
(status_pending_p): Don't consider explicitly suspended lwps.
(linux_wait_for_lwp): Take an integer pid instead of a lwp_info
pointer. Add OPTIONS argument. Change return type to int. Use
my_waitpid instead of sleeping. Handle WNOHANG. Use lwpid_of.
(linux_wait_for_event): Take an integer pid instead of a lwp_info
pointer. Add status pointer argument. Return a pid instead of a
status. Use lwpid_of. Adjust to linux_wait_for_lwp interface
changes. In non-stop mode, don't switch to a random thread.
(linux_wait): Rename to...
(linux_wait_1): ... this. Add target_options argument, and handle
it. Adjust to use resume_kind. Use lwpid_of. In non-stop mode,
don't handle the continue thread. Handle TARGET_WNOHANG. Merge
clean exit and signal exit code. Don't stop all threads in
non-stop mode. In all-stop mode, only stop all threads when
reporting a stop to GDB. Handle explicit thread stop requests.
(async_file_flush, async_file_mark): New.
(linux_wait): New.
(send_sigstop): Use lwpid_of.
(wait_for_sigstop): Use lwpid_of. Adjust to linux_wait_for_event
interface changes. In non-stop mode, don't switch to a random
thread.
(linux_resume_one_lwp): Use lwpid_of.
(linux_continue_one_thread, linux_queue_one_thread): Merge into ...
(linux_resume_one_thread): ... this. Handle resume_stop. In
non-stop mode, don't look for pending flag in all threads.
(resume_status_pending_p): Don't consider explicitly suspended
threads.
(my_waitpid): Reimplement. Emulate __WALL.
(linux_request_interrupt, linux_read_offsets, linux_xfer_siginfo):
Use lwpid_of.
(sigchld_handler, linux_supports_non_stop, linux_async)
(linux_start_non_stop): New.
(linux_target_ops): Register linux_supports_non_stop, linux_async
and linux_start_non_stop.
(initialize_low): Install SIGCHLD handler.
* thread-db.c (thread_db_create_event, find_one_thread)
(thread_db_get_tls_address): Use lwpid_of.
* win32-low.c (win32_detach): Adjust to use resume_kind.
(win32_wait): Add `options' argument.
* spu-low.c (spu_resume): Adjust to use resume_kind.
(spu_wait): Add `options' argument.
* target.h (enum target_waitkind): New.
(struct target_waitstatus): New.
(struct target_ops) <wait>: Return an unsigned long. Take a
target_waitstatus pointer instead of a char pointer.
(mywait): Likewise.
* target.c (mywait): Change prototype to return an unsigned long.
Take a target_waitstatus pointer instead of a char pointer. Adjust.
* server.h (thread_from_wait, old_thread_from_wait): Delete
declarations.
(prepare_resume_reply): Change prototype to take a
target_waitstatus.
* server.c (thread_from_wait, old_thread_from_wait): Delete.
(last_status, last_ptid): New.
(start_inferior): Remove "statusptr" argument. Adjust. Return a
pid instead of a signal.
(attach_inferior): Remove "status" and "signal" parameters.
Adjust.
(handle_query): For qGetTLSAddr, parse the thread id with strtol,
not as an address.
(handle_v_cont, handle_v_attach, handle_v_run, handle_v_kill)
(handle_v_requests, myresume): Remove "status" and "signal"
parameters. Adjust.
(handle_status): New.
(main): Delete local `status'. Adjust.
* remote-utils.c: Include target.h.
(prepare_resume_reply): Change prototype to take a
target_waitstatus. Adjust.
* linux-low.c (linux_wait): Adjust to new target_ops->wait
interface.
* spu-low.c (spu_wait): Adjust.
* win32-low.c (enum target_waitkind, struct target_waitstatus):
Delete.
(win32_wait): Adjust.
(struct target_ops): Add a `n' argument to the `resume' callback.
* server.c (start_inferior): Adjust.
(handle_v_cont, myresume): Adjust.
* linux-low.c (check_removed_breakpoint): Adjust to resume
interface change, and to removed leave_stopped field.
(resume_ptr): Delete.
(struct thread_resume_array): New.
(linux_set_resume_request): Add new `arg' parameter. Adjust to
resume interface change.
(linux_continue_one_thread, linux_queue_one_thread)
(resume_status_pending_p): Check if the resume field is NULL
instead of checking the leave_stopped member.
(linux_resume): Adjust to the target resume interface change.
* spu-low.c (spu_resume): Adjust to the target resume interface
change.
* win32-low.c (win32_detach, win32_resume): Ditto.
Gary Benson
Pedro Alves
Tom Tromey
Markus Metzger
Joel Brobecker
Luis Machado
Markus Metzger
Joel Brobecker
Yao Qi
Jan Kratochvil
Stan Shebs
Ulrich Weigand
Pierre Muller
H.J. Lu
Vladimir Prus
Paul Pluzhnikov
Aleksandar Ristovski