S-record download code into srec.c.
* srec.c srec.h: New files. Contain S-record loading routines
formerly in monitor.c.
* serial.c serial.h: New routine just like fprintf, but uses
serial_t instead of FILE *.
* sh-tdep.c (frame_find_saved_regs init_extra_frame_info):
Don't add four to saved pc (makes things match manual). Also, fix
bug where we didn't get pc from stack frame correctly.
* config/sh/tm-sh.h (SAVED_PC_AFTER_CALL): Don't add four to
saved pc. Real hardware does this for you.
* sh3-rom.c (sh3_load): New routine. Sets up for download then
calls generic S-record loader.
* config/h8300/h8300.mt, config/h8500/h8500.mt,
config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt:
Add srec.o to TDEPFILES.
around calls to create_longjmp_breakpoint. Why install the
breakpoints if we can't find the longjmp target?
* infrun.c (wait_for_inferior): Cleanup comments near call test.
* remote-mips.c: Fixed a bunch of prototypes to avoid char/int
complaint from picky compilers. Add comment to mips_expect.
Replace all instances of sr_get_debug with remote_debug.
* (mips_readchar): Don't jam init string to monitor.
mips_initialize() handles that.
* (mips_receive_header): Print better message when we get too
much garbage.
* (mips_request): Allow caller to pass in buff to allow them to
analyze the returned message.
* (mips_initialize): Re-do initialization to try sending a BREAK,
a ^C, and then a download escape sequence. Cleanup protocol
startup. Eliminate sleeps. Clear breakpoints (if using monitor
breakpoints). Re-init frame.
* (mips_detach): Close down target.
start-sanitize-gm
* (mips_resume): Pass signal down to target.
* (mips_create_inferior): Start target with TARGET_SIGNAL_PWR.
end-sanitize-gm
* (mips_wait): Handle return status with registers, or breakpoint stuff.
* (mips_kill): Add ^C handling.
* (mips_insert_breakpoint mips_remove_breakpoint): Call new
breakpoint stuff if enabled.
* (calculate_mask remote_mips_set_watchpoint
remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
Hardware watchpoint/breakpoint stuff.
* (common_breakpoint): Common code for new monitor breakpoint commands.
* (mips_load): Don't use `prompt'. It's a global variable.
* top.c (dont_repeat_command): New command for use in
user-defined commands to suppress auto-repeat (by hittin return key).
start-sanitize-gm
* utils.c (request_quit): Call target_kill here. Good idea.
Needs a better implementation.
end-sanitize-gm
* valops.c: Add start of auto function-call abandonment capability.
start-sanitize-gm
* c-exp.y: Add code (currently disabled) to handle GM dynamic
structures (it conflicts with @!).
* eval.c (evaluate_subexp_standard): ditto.
* expprint.c (print_subexp dump_expression): ditto.
* expression.h (enum exp_opcode): ditto.
* parse.c (length_of_subexp): ditto.
* configure, configure.in: Add mip*-*-magic* target.
* magic.c magic.h: Special routines to handle GM stuff (like
stepping through dispatcher).
end-sanitize-gm
sh3 monitor support.
* monitor.c: Cleanup regexp compilation stuff to make it easier
to use several regexps.
* monitor.h: Get rid of struct rom_cmd_data. It's no longer used.
* config/m68k/tm-monitor.h: Don't redefine NUM_REGS here. It just
causes GDB to crash.
* expprint.c (print_subexp): Add OP_NAME support.
* parse.c (length_of_subexp, prefixify_subexp): Likewise.
* scm-lang.c (scm_unpack, in_eval_c, scm_lookup_name): new function.
* scm-lang.h: Declare builtin_type_scm; other minor tweaks.
* values.c (unpack_long): If type is SCM, call scm_unpack.
* scm-valprint.c (scm_val_print): Use extract_signed_integer,
instead unpack_long
* scm-lang.c: More Scheme expression parsing from here ...
* scm-exp.c: ... to here. New file.
Also, provide for gdb to evaluate simple constants and names..
* Makefile.in: Note new scm-exp.{c,o}.
* scm-valprint.c: ... this new file.
Also major improvements in support for printing SCM values.
* scm-lang.h: New file.
* scm-tags.h: New file.
* Makefile.in: Note new scm-valprint.{c,o}.
* callback.[ch]: New files.
* remote-rdp.c: Support for the ARM RDP monitor.
* Makefile: Update.
* arm-tdep.c (arm_othernames): New.
(_initialize_arm_tdep): install 'othernames' command.
(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
* configure.in: Check for termios.h, termio.h and sgtty.h.
(i[345]86-*-win32*): New host.
* configure: Regenerated.
* inflow.c: Clean up inclusions.
* main.c (main): Check for WINGDB, not WIN32.
* printcmd.c (do_examine): Put QUIT test in loop.
* remote-hms.c (e7000_load): Delete.
(hms_ops): Point to generic_load instead.
* remote-hms.c (hms_ops): Point to generic_load.
* remote-sim.c (sim_callback_write_stdout): Becomes
gdbsim_write_stdout.
(gdbsim_load): Call generic_load.
* remote-utils.c (gr_load_image): Delete.
* ser-unix.c (terminal.h): Include instead of havig
own #if tree.
(hardwire_flush_input): Reset input buffer too.
* source.c (openp): If WIN32 then open file in binary mode.
* terminal.h: Configure IO mechanism using autoconf defines if available and
not overriden.
* utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check.
* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o
* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE.
(ADDR_BITS_REMOVE): New.
(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
(INST_xx): New
(FRAME_FIND_SAVED_REGS): Pass the right argument.
(arm_get_next_pc): Declare.
* mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
out by autoconf.
* config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
* Makefile.in, configure.in: Converted to use autoconf
* aclocal.m4: New file, local autoconf macro definitions.
* configure: New file, generated with autoconf 2.3.
unnecessary remoteloadprotocol and remoteloadtype support.
* (expect expect_prompt): Change names to monitor_expect and
monitor_expect_prompt. Make them global.
* (printf_monitor): Change name to monitor_printf. Make global.
* (monitor_read_memory): Flush command echo to avoid parsing
ambiguity with CPU32Bug monitor.
* (monitor_load): Remove remoteloadprotocol and remoteloadtype
support. Call target_ops->load_routine, default to
monitor_load_srec.
* (monitor_load_srec): Remove everything but S-record support.
* monitor.h (monitor_ops): Add load_routine to provide monitor
specific download capability.
* remote-est.c: Clean up copyrights and comments.
* w89k-rom.c: Use new xmodem support.
* xmodem.c xmodem.h: New files to support xmodem downloads.
* rom68k-rom.c remote-est.c: Fix copyrights, add load_routine
entry to monitor_ops.
* cpu32bug-rom.c: New file to support Moto BCC debuggers.
* config/m68k/est.mt (TDEPFILES): Add cpu32bug.o.
* config/pa/hppapro.mt (TDEPFILES): Add xmodem.o.
* remote-arc.c: new file for arc-specific protocol through
parallel line.
* ser-go32-para.c: new file for go32 parallel port communication.
* .Sanitize: sanitize arc specific files out.
i386-unknown-aout): New targets.
(mk.tmp): Add *DEPFILES definitions.
* mpw-make.in: Remove gC rules, clean up definitions for other
include files, bump version, fix bogus \ that should be \Option-d.
(init.c): Build correctly.
(mpw-init.c): Remove.
Various name changes to match those used by hp-symtab.h.
No longer sanitize away hpread changes. Merge ChangeLog.hpread into
ChangeLog and ChangeLog-93.
single frame backtracing within the library only. Only works when
using the HPUX 9 dynamic linker. More functionality to be added
soon.
* somsolib.c, somsolib.h: New files.
* Makefile.in (HFILES_NO_SRCDIR): Add somsolib.h
(ALLDEPFILES): Add somsolib.c.
(somsolib.o): Add some dependencies.
* mpw-make.in (HFILES_NO_SRCDIR): Add somsolib.h
(ALLDEPFILES): Add somsolib.c.
(somsolib.o): Add some dependencies.
* somread.c (som_symtab_read): Accept multiple section offsets.
All callers changed. Adjust all text symbols with the first
section offset.
* symfile.c (find_lowest_section): Enable this function. Add some
tie-breaking logic when sections have the same vma.
(syms_from_objfile): Use find_lowest_section rather than looking
for ".text" by name. Relax warning to only warn if the lowest
section is not a code section.
* config/pa/{hppabsd.mh, hppahpux.mh} (NATDEPFILES): Add somsolib.o
* config/pa/{nm-hppab.h, nm-hppah.h}: Include somsolib.h.
(hpread.o): Add dependencies.
* somread.c: Do not include "aout/aout64.h". SOM has nothing to
do with a.out.
(BYTES_IN_WORD): Delete.
(som_symfile_read): Call hpread_build_psymtabs to build any
minimal symbols based on the HP C native debug symbols.
(som_symfile_finish): Call hpread_symfile_finish.
(som_symfile_init): Call hpread_symfile_init.
* config/pa/tm-hppa.h (HPREAD_ADJUST_STACK_ADDRESS): Define.
* hppa-tdep.c (hpread_adjust_stack_address): New function.
* config/pa/hppabsd.mh (NATDEPFILES): Add hpread.o
* config/pa/hppahpux.mh (NATDEPFILES): Likewise.
* hpread.c: New file.
bus interface.
* serial.c (serial_open): Notice device "pc".
* remote-e7000.c: Fix copyright date.
(expect): Compare \n and \r the same.
(e7000_open): Allow pc as a serial port
* sh/sh.mt: Add ser-e7kpc.
* h8300/h8300hms.mt: Add ser-e7kpc.
* main.c (proc_wait): Don't wait if using go32.
comments to reflect that this file deals with SOM (an object file
format), rather than the PA (a cpu).
(Makefile.in): Chaned appropriately.
(config/pa/hppabsd.mh, config/pa/hppahpux.mh): Likewise.
* dbxread.c (somstab_build_psymtabs): Renamed from
pastab_build_psymtabs.
to new file top.c. Make things extern instead of static and
similar rearrangements to deal with this.
* top.h: New file.
* utils.c: Move fputs_unfiltered to main.c. Remove
FPUTS_UNFILTERED_OVERRIDE ifndef.
* Makefile.in: Change so that gdb uses main.c, utils.c, and top.c,
and libgdb uses utils.c and top.c.
are in the .plt section.
* minsyms.c (lookup_solib_trampoline_symbol_by_pc,
find_solib_trampoline_target): New functions for handling
stepping into -g compiled shared libraries.
* symtab.h (lookup_solib_trampoline_symbol_by_pc,
find_solib_trampoline_target): Add prototypes.
* config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE):
Define to handle stepping into -g compiled shared libraries.
* config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle
stepping into -g compiled shared libraries.
* configure.in: Add mips-*-sysv4* support.
* config/mips/mipsv4.mh, config/mips/mipsv4.mt,
config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c:
New files for MIPS SVR4 support.
* Makefile.in: Update for new mipsv4 files.
* alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use
read_next_frame_reg to obtain the frame relative stack pointer.
* mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to
obtain the frame relative stack pointer.
* mdebugread.c (parse_partial_symbols, psymtab_to_symtab1):
Handle stStatic and stStaticProc symbols in stabs-in-ecoff output
by entering them into the minimal symbol table.
* printcmd.c (print_scalar_formatted): Do not try to unpack to
a long for float formats.
* solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not
get defined in <link.h>.
* solib.c (solib_add): Add shared library sections to the section
table of the target before adding the symbols.
* partial-stab.h: Relocate static and global functions.
* dbxread.c (read_dbx_symtab): Remove unused variable
end_of_text_address. Relocate text_addr when passing it
to end_psymtab.
For Alpha OSF/1 targets, enable gdb to set breakpoints in shared
library functions before the executable is run. Retrieve dynamic
symbols from stripped executables.
* mipsread.c (read_alphacoff_dynamic_symtab): New function.
* mipsread.c (mipscoff_symfile_read): Use it. Issue warning message
if no debugging symbols were found.
* alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered
pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS
is defined.
* config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define,
OSF/1 has shared libraries.
GNUTARGET.
* putenv.c: Removed, conflicts with system declaration of
putenv on RS/6000 running AIX 3.2.5, and above change makes it
unnecessary.
* Makefile.in: Change accordingly.
* procfs.c (procfs_create_inferior): Change comment accordingly.
VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK.
* symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not
(CORE_ADDR)0, from target_link, since that is what it uses.
Process name at end, not during parsing (like we did before Kung's
change), so that -readnow and -mapped can appear anywhere.
Make text_relocation a local variable.
* config/i386/i386os9k.mt: Fix comment.
* Makefile.in (ALLDEPFILES): Add remote-os9k.c.
* os9kread.c: Put "comments" after #endif inside /* */.
* stabsread.h: Add os9k_stabs variable.
* stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol):
Set it.
* stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol
descriptor in global_symbols not local_symbols.
(read_type): If os9k_stabs, accept 'c', 'i', and 'b' type
descriptors.
(read_type): If os9k_stabs, accept function parameters after 'f'
type descriptor.
(read_array_type): If os9k_stabs, don't expect index type and
expect lower and upper to be separated by ',' not ';'.
(read_enum_type): If os9k_stabs, read a number before the first
enumeration constant.
(os9k_init_type_vector): New function.
(dbx_lookup_type): Call it when starting new type vector.
* config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION.
* (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol.
* os9kstab.c: Removed.
* Makefile.in: Update accordingly.
* objfiles.c (objfile_relocate_data): Removed.
* remote-os9k.c (rombug_wait): Call objfile_relocate
not objfile_relocate_data.
* objfiles.h, objfiles.c: Remove find_pc_objfile.
* remote-os9k.c (rombug_wait): Call find_pc_section not
find_pc_objfile.
* main.c (quit_command): Check inferior_pid; revert Kung change.
* remote-os9k.c (rombug_create_inferior): Set inferior_pid.
* dst.h, dstread.c, config/m68k/{apollo68b.mt,tm-apollo68b.h}:
New files.
* config/m68k/nm-apollo68b.h: Add more defines.
* configure.in: Recognize apollo target, not just host.
cleans up all kinds of hassles (which nm to use in munch, etc). The
new formatting conventions (mostly already followed) are that
the name of the _initialize_* routines must start in column zero,
and must not be inside #if.
* munch: Removed.
* Makefile.in: Remove references to munch.
* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
z8k-tdep.c: Make sure the above conventions are followed. Make
sure they are all declared as returning void. Clean up
miscellaneous comments and such.
* config/i386/i386mach.c: Explain this is for the old (probably
non-functional and/or obsolete) Mach stuff.
* m3-nat.c, config/nm-m3.h,
i386m3-nat.c, mipsm3-nat.c, ns32km3-nat.c,
config/i386/{i386m3.mh,i386m3.mt,tm-i386m3.h,xm-i386m3.h},
config/i386/{i386mk.mh,i386mk.mt,tm-i386mk.h,xm-i386mk.h},
config/mips/{mipsm3.mh,mipsm3.mt,tm-mipsm3.h,xm-mipsm3.h},
config/ns32k/{ns32km3.mh,ns32km3.mt,tm-ns32km3.h,xm-ns32km3.h}:
New files.
* alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
New files.
* Makefile.in: Add new files and dependencies.
* configure.in: Add alpha target.
* config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o
* config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle
shared libraries now.
* config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right.
* defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE,
provide `unsigned int' default.
* breakpoint.c (breakpoint_auto_delete): Delete only if we really
stopped for the breakpoint.
* stabsread.c, stabsread.h (define_symbol): Change valu parameter
to a CORE_ADDR.
* stabsread.c (read_range_type): Handle the case where the lower
bound overflows and the upper doesn't and the range is legal.
* infrun.c (resume): Do not step a breakpoint instruction if
CANNOT_STEP_BREAKPOINT is defined.
* inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT.
Now that we have the bp_call_dummy breakpoint the call dummy code
is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and
FIX_CALL_DUMMY can be used to set up everything for the dummy.
The breakpoint for the dummy is set at the entry point and thats it.
* blockframe.c (inside_entry_file, inside_entry_func): Do not stop
backtraces if pc is in the call dummy at the entry point.
* infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use
the expected breakpoint pc when setting up the frame for
set_momentary_breakpoint.
* symfile.c (entry_point_address): New function for AT_ENTRY_POINT
support.
* valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
file may now be distributed.
* i386-nlmstub.c: New file; debugging stub for i386 NetWare. Must
be compiled with NetWare header files and turned into an NLM with
nlmconv.
* remote-sim.c: Add remote debug feature. Rename stuff to distinguish
interface to simulator from gdb-specific stuff. Other changes.
start-sanitize-v9
* remote-sp64sim.c: Renamed to remote-sim.c.
Use sr_get_debug instead of our own sim_verbose/simif_snoop.
Use gnutarget in call to bfd_openr.
Rename simif_* to gdbsim_*.
* config/sparc/sp64sim.mt: Change remote-sp64sim.c to remote-sim.c.
end-sanitize-v9
* configure.in: Use them.
* alldeps.mak: List them.
* coffread.c (decode_base_type): Deal with anonymous enum type.
* i387-tdep.c (print_387_status_word): Add comment re "top".
* i386-tdep.c [I386_AIX_TARGET] (i386_extract_return_value): New func.
* dbxread.c: Use SEEK_SET and SEEK_CUR, not L_*. Define them if and
only if not defined by a header file.
* mipsread.c: Don't define L_SET or L_INCR.
* config/pa/hppabsd.mh: Add more files to NATDEPFILES.
* config/pa/xm-hppa[bh].h: Define FIVE_ARG_PTRACE.
* hppab-nat.c: Delete WANT_NATIVE_TARGET ifdefs.
ptrace needs 5 arguments, #define ptrace to always
pass zero as the 5th argument.
(alldeps.mak): Add "${srcdir}/" to files in alldeps.mak.
(TAGS): Deal with srcdir and new config directory scheme.
createtags: Remove.
Makefile.in (NONSRC): Remove createtags.
alldeps.mak: Updated.
Irix 4.x, which stores regs a bit differently from other /proc
based systems.
* procfs.c, core-svr4.c: Move fetch_core_registers from procfs.c
to new file core-svr4.c.
* config/i386/i386sol2.mh, config/i386/i386v4.mh, config/m68k/amix.mh,
config/i386/ncr3000.mh, config/sparc/sun4sol2.mh: Add core-svr4.o
to NATDEPFILES.
* config/mips/irix4.mh: Add corelow.o to NATDEPFILES.
* ieee-float.h: Moved to ../include.
* Makefile.in: Update accordingly.
* i386-pinsn.c (print_insn), m68k-pinsn.c (print_insn):
Convert to stubs that call disassemblers in ../opcodes/*-dis.c.
* m68k-tdep.c: Removed definition of ext_format ext_format_68881;
it is now in ../opcodes/m68881-ext.c.
* mips-tdep.c (mips_skip_prologue): Try to skip more of the
prologue (some callers _do_ care).
* mips-pinsn.c (print_insn), z8k-tdep.c (print_insn): Convert to
new interface of ../opcodes/*-dis.c.
* ch-exp.y: Add #include <ctype.h>.
reported by mycroft@gnu.ai.mit.edu.
(Ultrix 2.2 support from Michael Rendell <michael@mercury.cs.mun.ca>)
* configure.in (vax-*-ultrix2*): New triplet.
* config/vaxult2.mh: New file.
* xm-vaxult2.h: New file.
protocol.
* config/idt.mt: New file; uses remote-mips.c
* configure.in (mips-idt-ecoff): New target; uses idt.mt.
* mips-tdep.c (mips_fpu): New variable; controls use of MIPS
floating point coprocessor.
(mips_push_dummy_frame): If not mips_fpu, don't save floating
point registers.
(mips_pop_frame): If not mips_fpu, don't restore floating point
registers.
(_initialize_mips_tdep): New function; let the user reset mips_fpu
variable.
* tm-mips.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): If not
mips_fpu, don't use fp0 as floating point return register.
(FIX_CALL_DUMMY): If not mips_fpu, don't save floating point
registers.
Also added remote-mips.c to .Sanitize file.
