around calls to create_longjmp_breakpoint. Why install the
breakpoints if we can't find the longjmp target?
* infrun.c (wait_for_inferior): Cleanup comments near call test.
* remote-mips.c: Fixed a bunch of prototypes to avoid char/int
complaint from picky compilers. Add comment to mips_expect.
Replace all instances of sr_get_debug with remote_debug.
* (mips_readchar): Don't jam init string to monitor.
mips_initialize() handles that.
* (mips_receive_header): Print better message when we get too
much garbage.
* (mips_request): Allow caller to pass in buff to allow them to
analyze the returned message.
* (mips_initialize): Re-do initialization to try sending a BREAK,
a ^C, and then a download escape sequence. Cleanup protocol
startup. Eliminate sleeps. Clear breakpoints (if using monitor
breakpoints). Re-init frame.
* (mips_detach): Close down target.
start-sanitize-gm
* (mips_resume): Pass signal down to target.
* (mips_create_inferior): Start target with TARGET_SIGNAL_PWR.
end-sanitize-gm
* (mips_wait): Handle return status with registers, or breakpoint stuff.
* (mips_kill): Add ^C handling.
* (mips_insert_breakpoint mips_remove_breakpoint): Call new
breakpoint stuff if enabled.
* (calculate_mask remote_mips_set_watchpoint
remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
Hardware watchpoint/breakpoint stuff.
* (common_breakpoint): Common code for new monitor breakpoint commands.
* (mips_load): Don't use `prompt'. It's a global variable.
* top.c (dont_repeat_command): New command for use in
user-defined commands to suppress auto-repeat (by hittin return key).
start-sanitize-gm
* utils.c (request_quit): Call target_kill here. Good idea.
Needs a better implementation.
end-sanitize-gm
* valops.c: Add start of auto function-call abandonment capability.
start-sanitize-gm
* c-exp.y: Add code (currently disabled) to handle GM dynamic
structures (it conflicts with @!).
* eval.c (evaluate_subexp_standard): ditto.
* expprint.c (print_subexp dump_expression): ditto.
* expression.h (enum exp_opcode): ditto.
* parse.c (length_of_subexp): ditto.
* configure, configure.in: Add mip*-*-magic* target.
* magic.c magic.h: Special routines to handle GM stuff (like
stepping through dispatcher).
end-sanitize-gm
* c-lang.c (c_language_defn, cplus_language_defn, asm_langauge_defn),
f-lang.c (f_language_defn), language.c (unknown_language_defn,
auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn):
Set evaluate_exp to evaluate_subexp_standard.
* ch-lang.c (evaluate_subexp_chill): New function. Chill-specific
support for MULTI_SUBSCRIPT.
(chill_language_defn): Set evaluate_exp to evaluate_subexp_chill.
* eval.c (enum noside): Move from here ....
* expression.h (enum noside): ... to here.
(evaluate_subexp_standard): New prototype.
* eval.c (evaluate_subexp): Renamed to evaluate_subexp_standard.
Removed lo-longer-needed test for chill_varying_type.
(evaluate_subexp): New. Calls exp->language_defn->evaluate_exp.
OP_UNDETERMINED_ARGLIST (no backtracking, more general).
* f-valprint.c (f_val_print): Print TYPE_CODE_STRING using
LA_PRINT_STRING, and not val_print_string (which reads from inferior).
* ch-lang.c (chill_is_varying_struct), ch-lang.h: Remve function
duplicate function made redundant by chill_varying_type.
Re-write of f77 string and complex number support:
* language.h (struct language_defn): New fields string_lower_bound
and string_char_type.
* c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn),
language.c (unknown_language_defn, auto_language_defn,
local_language_defn), m2-lang.c (m2_language_defn), f-lang.c
(f_language_defn), ch-lang.c (chill_language_defn): Set new fields.
* gdbtypes.c (create_string_type): Use new string_char_type field.
* valops.c (value_string): Use new string_lower_bound field.
* defs.h (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT): Removed.
* f-lang.c (f_create_fundamental_type, _initialize_f_language),
m2-lang.c (m2_create_fundamental_type),
gdbtypes.c (_initialize_gdbtypes): Set TYPE_TARGET_TYPE of complex
types. Set their TYPE_CODEs to TYPE_CODE_COMPLEX.
* mdebugread.c (mdebug_type_complex, mdebug_type_double_complex):
Removed. Use builtin_type_complex and builtin_type_double_complex.
* gdbtypes.h (enum type_code): Removed TYPE_CODE_LITERAL_STRING
and TYPE_CODE_LITERAL_COMPLEX.
* c-typeprint.c, f-typeprint.c, f-valprint.c, eval.c: Removed uses of
TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX.
* gdbtypes.c, gdbtypes.h (f77_create_literal_complex_type,
f77_create_literal_string_type): Removed.
* value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_MEMADDR,
VALUE_SUBSTRING_MYADDR): Removed.
* expression.h (enum exp_opcode): Rename OP_F77_LITERAL_COMPLEX to
OP_COMPLEX.
* parse.c: Update accordingly.
* f-valprint.c (f77_print_cmplx): Removed.
(f_val_print case TYPE_CODE_COMPLEX): Re-write to use print_floating.
* f-exp.y (STRING_LITERAL): Use OP_STRING instead of OP_ARRAY.
* eval.c (evaluate_subexp): For case OP_ARRAY, don't call
f77_value_literal_string.
* valops.c, value.h (f77_value_literal_string, f77_value_substring,
f77_assign_from_literal_string, f77_assign_from_literal_complex):
Removed.
(value_assign): No longer need to handle literal types.
* valops.c (f77_value_literal_complex), value.h: Re-written and
renamed to value_literal_complex. Last arg is now a (complex) type.
* valops.c (f77_cast_into_complex): Re-written and renamed to
cast_into_complex.
* eval.c (evaluate_subexp): Update accordingly.
start_element, left_element, right_element, slice_size,
lower_element, upper_element, first_element): Removed.
(value_string_slice, value_array_slice): Replaced by ...
(slice): New non-terminal, with working slice support.
(primitive_value_lparen, rparen): New non-terminals.
(maybe_tuple_elements): New non-terminal, to allow empty tuples.
(idtokentab): Added "up".
* value.h (COERCE_VARYING_ARRAY): New macro.
* valarith.c (value_subscript): Use it.
* valops.c (value_cast): Likewise. Also, do nothing if already
correct type, and allow converting from/to range to/from scalar.
* valops.c, value.h (varying_to_slice, value_slice): New functions.
* eval.c (OP_ARRAY): Add cast for array element.
* expression.h (TERNOP_SLICE, TERNOP_SLICE_COUNT): New exp_opcodes.
* valops.c (chill_varying_type): Moved function frp, here ...
* gdbtypes.c (chill_varying_type), gdbtypes.h: ... to here.
* parse.c (length_of_subexp, prefixify_subexp): Add support
for TERNOP_SLICE, TERNOP_SLICE_COUNT.
* expprint.c (print_subexp, dump_expression): Likewise.
* eval.c (evaluate_subexp): Likewise.
* eval.c (evaluate_subexp case MULTI_SUBSCRIPT): Don't call
value_x_binop on a Chill varying string.
* ch-exp.y (match_bitstring_literal): Fix for proper endianness.
* expprint.c (print_subexp): Don't call error on OP_BITSTRING,
just print B'<unimlemented>'.
* gdbtypes.c (create_set_type): Fix bug in length calculation.
* valops.c, value.h (value_bitstring): New function.
* eval.c (evaluate_subexp): Implement support for OP_BITSTRING.
* ch-typeprint.c (chill_type_print_base): For TYPE_CODE_FUNC,
check that return type is non-void, and print in proper Chill syntax.
labeled structre tuples.
* ch-exp.y (tuple_element, named_record_element, tuple_elements):
New non-terminals, to handle labeled structure tuples.
(tuple): Re-define using tuple_elements.
* eval.c (evaluate_labeled_field_init): New function, to handle
initialization of structure fields, possibly using OP_LABELED.
(evaluate_subexp): Use it.
* expprint.c (print_subexp case): For OP_ARRAY, use Chill syntax
for Chill. Handled OP_LABELED.
* parse.c (length_of_subexp, prefixify_subexp): Handle OP_LABELED.
* eval.c (evaluate_subexp): Handle Chill Powerset tuples.
* valarith.c (value_bit_index): Just treat bitstring as represented
by an array of bytes. Alignment is handled by compiler.
(tuple): Parse simple unlabelled tuples.
* eval.c (evaluate_subexp case OP_ARRAY): Use expect_type to
evaluate brace-initializer-expressions depending on context.
(evaluate_subexp case UNOP_CAST): Pass the target type as
expected type when evaluating the expression.
ChangeLog eval.c valops.c
* valops.c (typecmp): improve prototype matching when calling
a method. Make 'p (*(ostream *) &cout) << "lll" ' to work.
* eval.c(evalute_subexp): fix operator search problem when call
like p x.'operator+'(i).
* eval.c (evaluate_subexp): Handle new BINOP_MOD.
* expprint.c (dump_expression): Handle new BINOP_MOD.
* language.c (binop_type_check): Handle new BINOP_MOD.
* main.c (float_handler): Re-enable float handler when hit.
* valarith.c (language.h): Include, need current_language.
* valarith.c (TRUNCATION_TOWARDS_ZERO): Define default macro
for integer divide truncates towards zero for negative results.
* valarith.c (value_x_binop): Handle BINOP_MOD if seen.
* valarith.c (value_binop): Allow arithmetic operations on
TYPE_CODE_CHAR variables. Add case to handle new BINOP_MOD.
**** start-sanitize-chill ****
* ch-exp.y (operand_4): Add useful actions for MOD and REM.
* ch-exp.y (tokentab3): Add MOD and REM.
* ch-exp.y (yylex): Set innermost_block for symbols found
in local scopes. Return LOCATION_NAME for local symbols.
* ch-lang.c (chill_op_print_tab): Fix MOD entry to use
BINOP_MOD instead of BINOP_REM. Add REM entry, using BINOP_REM.
**** end-sanitize-chill ****
* eval.c (evaluate_subexp_with_coercion): Only coerce arrays
to pointer types when the current language is C. It loses for
other languages when the lower index bound is nonzero.
* valarith.c (value_subscript): Take array lower bounds into
account when performing subscripting operations.
* valops.c (value_coerce_array): Add comment describing why
arrays with nonzero lower bounds are dealt with in value_subscript,
rather than in value_coerce_array.
* expprint.c (print_subexp): Rename BINOP_MULTI_SUBSCRIPT to
MULTI_SUBSCRIPT.
* expprint.c (dump_expression): New function for dumping
expression vectors during gdb debugging.
* expression.h (BINOP_MULTI_SUBSCRIPT): Name changed to
MULTI_SUBSCRIPT and moved out of BINOP range.
* expression.h (DUMP_EXPRESSION): New macro that calls
dump_expression if DEBUG_EXPRESSIONS is defined.
* m2-exp.y (BINOP_MULTI_SUBSCRIPT): Changed to MULTI_SUBSCRIPT.
* parse.c (length_of_subexp, prefixify_subexp): Change
BINOP_MULTI_SUBSCRIPT to MULTI_SUBSCRIPT.
* parse.c (parse_exp_1): Call DUMP_EXPRESSION before and after
prefixify'ing the expression.
* printcmd.c (print_command_1): Add comment.
**** start-sanitize-chill ****
* ch-exp.y (expression_list): Add useful actions.
* ch-exp.y (value_array_element): Add useful actions.
* ch-exp.y (array_primitive_value): Add production.
* ch-exp.y (yylex): Recognize ',' as a token.
**** end-sanitize-chill ****
* Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c,
m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c.
* Makefile.in (HFILES): Add valprint.h.
* Makefile.in (OBS): Add typeprint.o, c-typeprint.o,
m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o.
* typeprint.c, typeprint.h: New files for language independent
type printing functions.
* c-typeprint.c, m2-typeprint.c: New files for language dependent
type printing functions and definitions.
* valprint.h: New include file for language independent value
printing definitions.
* c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language
dependent value printing functions.
* c-exp.y (production ptype): Add range_type variable and use new
create_range_type function.
* c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab),
infcmd.c (path_var_name), language.c (unk_op_print_tab),
m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent
"const static" to ANSI-conformant "static const".
* c-exp.y (c_create_fundamental_type): Remove unused nbytes.
* c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type,
and c_val_print.
* c-lang.h (c_print_type, c_val_print): Add prototypes.
* coffread.c (decode_type): Add range_type variable and call to
new create_range_type function.
* complaints.c (complain): Remove unused val variable.
* complaints.c (_initialize_complaints): Make it void.
* convex-tdep.c (value_of_trapped_internalvar): Add range_type
variable and call new create_range_type function.
* defs.h (enum val_prettyprint): Move enum from value.h to here
so we can avoid having to include value.h just for prototypes that
need the enum (thanks ANSI).
* dwarfread.c (struct_type): Local anonymous_size variable is
only used if !BITS_BIG_ENDIAN.
* dwarfread.c (decode_subscript_data_item): Add rangetype
variable and call new create_range_type function.
* elfread.c (elf_symfile_read): Remove unused dbx and text_sect
variables.
* eval.c (evaluate_subexp): Remove unused local variable name
and the statement with no side effects that initializes it.
* expprint.c (print_subexp): Change local_printstr to
LA_PRINT_STRING.
* gdbtypes.c (create_range_type): New function that creates
a range type using code fragments from object file readers as
an example of what has to be initialized.
* gdbtypes.c (create_array_type): Removed index_type, low_bound,
and high_bound parameters, replaced with a single range_type
parameter. Change function body to use passed in range_type
rather than handcrafting one.
* gdbtypes.h (create_range_type): Add prototype.
* gdbtypes.h (create_array_type): Change prototype parameters.
* infrun.c (normal_stop): Remove unused local variables tem and c.
* infrun.c (hook_stop_stub): Return 0 rather than random value.
* language.c (unk_lang_print_type, unk_lang_val_print): Add
stub functions that call error if called.
* language.c (unknown_language_defn, auto_language_defn,
local_language_defn): Add initializers unk_lang_print_type and
unk_lang_val_print.
* language.h (struct language_defn): Reformat for larger
comments, add la_print_type and la_val_print members. Add
LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar
to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING.
* m2-lang.c (m2_create_fundamental_type): Remove unused local
variable nbytes.
* m2-lang.c (m2_language_defn): Add initializers m2_print_type
and m2_val_print.
* m2-lang.h (m2_print_type, m2_val_print): Add prototypes.
* main.c (execute_command): Remove unused local variable cmdlines.
* main.c (echo_command), stabsread.c (read_type), printcmd.c
(clear_displays), symmisc.c (block_depth), values.c
(clear_value_history):
Make testing of truth value of assignment result explicit.
* mipsread.c (upgrade_type): Update FIXME to include future use
of create_range_type.
* printcmd.c (ptype_command, ptype_eval, whatis_command,
whatis_exp, maintenance_print_type): Move prototypes and functions
to new typeprint.c.
* printcmd.c (_initialize_printcmd): Move add_com calls for
ptype_command and whatis_command to new typeprint.c.
* ser-bsd.c (serial_open): Remove unused variable sgttyb.
* source.c (find_source_lines): Local variable c only used
when LSEEK_NOT_LINEAR is defined.
* stabsread.c (read_array_type): Use new create_range_type
function.
* stabsread.c (read_range_type): Add new index_type variable and
call new create_range_type function rather than handcrafting
range types.
* symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE.
* symtab.c (typedef_print usages): Use c_typedef_print, renamed.
* symtab.c (type_print_base usages): Use c_type_print_base.
* symtab.c (type_print_varspec_prefix usages): Use
c_type_print_varspec_prefix.
* symtab.c (type_print_method_args usages): Use
cp_type_print_method_args.
* valprint.c: Completely ripped apart and the fragments used
to create c-valprint.c, cp-valprint.c, m2-valprint.c, and
valprint.h. Remaining stuff is language independent.
* value.h (struct fn_field): Forward declare for prototypes.
* value.h (type_print_1): Remove prototype.
* value.h (enum val_prettyprint): Moved to defs.h.
* value.h (typedef_print): Prototype renamed to c_typedef_print.
* value.h (baseclass_offset): Add prototype.
**** start-sanitize-chill ****
* Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c.
* Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o.
* ch-typeprint.c: New file for language dependent type printing.
* ch-valprint.c: New file for language dependent value printing.
* ch-exp.y (parse_number): Remove prototype and stub function.
* ch-exp.y (decode_integer_literal): Removed unused digits and
temp variables.
* ch-exp.y (convert_float): Completely ifdef out for now.
* ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5),
ch-lang.c (chill_op_print_tab):
Change from ANSI-obsolescent "const static" to ANSI-conformant
"static const".
* ch-exp.y (yylex): Add unhandled storage class enumeration
literals to switch statement for completeness.
* ch-lang.c (chill_create_fundamental_types): Remove unused
nbytes variable. Change dummy type to 2 bytes to match int.
Handle FT_VOID types gratuituously added to chill DWARF by
compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR
type rather than a one byte TYPE_CODE_INT type.
* ch-lang.c (chill_language_defn): Add chill_print_type and
chill_val_print.
* ch-lang.h (chill_print_type, chill_val_print): Add prototypes.
**** end-sanitize-chill ****
symtab.h, tm-i386v4.h, valprint.c, values.c: Lint.
* breakpoint.c, c-exp.y, coffread.c, command.c, environ.c, eval.c,
findvar.c, infcmd.c, infptrace.c, infrun.c, m2-exp.y, parse.c,
putenv.c, solib.c, sparc-xdep.c, symtab.c, tm-i386v.h, tm-sparc.h,
utils.c, valarith.c, valops.c, valprint.c, values.c:
Replace bcopy() use with memcpy(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* breakpoint.c, buildsym.c, coffread.c, dbxread.c, i386-tdep.c,
ieee-float.c, infcmd.c, sparc-tdep.c, stack.c, symtab.c, symtab.h,
target.c, values.c:
Replace bzero() use with memset(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* i386-tdep.c, main.c, valprint.c:
Replace bcmp() use with memcmp(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
(_initialize_remote): `set remotedebug' enables packet trace.
* dbxread.c (process_one_symbol:N_FUN): GCC now produces relative
N_SLINE's, etc, just like Sun cc on Solaris2.
* am29k-tdep.c (read_register_stack, write_register_stack):
Change RSTACK_HIGH_ADDR to rstack_high_address, a user-settable
variable. Add `set' and `show' commands for it.
* doc/gdb.texinfo: Document it.
* eval.c: Avoid residue-by-zero when evaluating without side effects.
(Bug and fix found by Pierre Willard.)
* sparc-tdep.c: Clean up slightly for Solaris2.
remote-hms.c, remote-mm.c, remote-nindy.c, remote-vx.c, remote.c,
target.c, target.h, valarith.c, valops.c, value.h, xcoffexec.c:
Remove to_call_function and target_call_function, since it
always calls the same thing (call_function_by_hand).
is OP_SCOPE, give an error.
* eval.c (evaluate_subexp): Pass third arg to lookup_struct_elt_type.
* eval.c (evaluate_subexp), values.c (value_virtual_fn_field):
Don't bother to do anything with
return value from fill_in_vptr_fieldno.
* eval.c (evaluate_subexp): If value_static_field returns NULL,
give an error.
