* values.c (allocate_value, record_latest_value, value_copy): Set it.
(record_latest_value): Don't mess with VALUE_LVAL of value.
* valops.c (value_assign): Check it. Reword existing error
message on not_lval.
an error, regardless of force_ellipsis. In the non-EIO case,
just print the error message rather than calling error(). Don't
access *(bufptr-1) if bufptr points to the start of the buffer.
When looking for '\0', don't increment bufptr and addr if bufptr
started out already at limit. If an error happens on fetching the
first character, don't print the string.
FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
Define to make backtracing through the various sigtramp handlers
work.
* i386-tdep.c (i386v4_sigtramp_saved_pc): New routine to fetch
the saved pc from ucontext on the stack for SVR4 signal handling.
target.h, remote-es.c, remote-nindy.c: Don't set baud rate if
baud_rate is -1. Remove sr_get_baud_rate and sr_set_baud_rate;
just use the global variable itself. When printing baud rate,
don't print a baud rate if baud_rate is -1.
(bpstat_what_main_action): New code BPSTAT_WHAT_THROUGH_SIGTRAMP.
* breakpoint.c (bpstat_what): Return BPSTAT_WHAT_THROUGH_SIGTRAMP
if we hit a bp_through_sigtramp breakpoint. Remove kludge which
ignored bs->stop for a bp_step_resume breakpoint.
* infrun.c (wait_for_inferior): Make a through_sigtramp_breakpoint
which performs one (the check_sigtramp2 one) of the functions
which had been handled by the step_resume_breakpoint. For each
use of the step_resume_breakpoint, make it still use the
step_resume_breakpoint, use the through_sigtramp_breakpoint, or
operate on both.
Deal with BPSTAT_WHAT_THROUGH_SIGTRAMP return from bpstat_what.
When setting the frame address of the step resume breakpoint, set
it to the address for frame *before* the call instruction is
executed, not after.
print_scalar_formatted rather than duplicating all the
CC_HAS_LONG_LONG and so on.
(mips_push_dummy_frame): Use read_register_gen rather than using
read_register and then putting it back in target format with
store_unsigned_integer. If registers are more than 4 bytes, give
an error rather than have some registers overwrite other
registers.
#if 0 unused include of opcode/mips.h.
* salib.c: Use macros instead of constants for I/O addresses to
make 931 support easier.
* sparclite.h: Change constraint for LOC to "rJ" to force use of
register in sta/lda instructions.
them in the pst.
* mdebugread.c (handle_psymbol_enumerators): New function to enter
the enumerators of an ecoff enum into the partial symbol table.
* mdebugread.c (parse_partial_symbols): Call it.
* symfile.c (reread_symbols): Initialize objfile->*_psymbols.next.
* symmisc.c (dump_psymtab): Fix typo, clean up output of section
offsets. Cast psymtab->read_symtab to PTR before passing it to
gdb_print_address.
* i386-tdep.c (i386_skip_prologue): Skip over instructions that
set up the global offset table pointer in pic compiled code.
* config/mips/tm-mips.h (FIX_CALL_DUMMY): For big endian targets,
error() on TYPE_CODE_FLT arguments whose size is greater than 8,
swap all other TYPE_CODE_FLT arguments as mips_push_arguments
ensures that floats are promoted to doubles before they are pushed
on the stack.
Fixup cache_on and flush_i_cache so that they work for both the
930 and 932 processors. Rewrite most low level funcs (uart
access & cache stuff) to use new ASI access macros in sparclite.h.
Also make it easy to access second serial port.
ourselves instead of worrying about INSTALL_XFORM. This enables
users to override INSTALL_PROGRAM in the standard way.
* Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
depend on Makefile.in.
gone now.
* c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c,
m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
remote-utils.c, stabsread.c: Include <string.h>.
* regex.c: Include "defs.h", change re_comp argument to const char *.
* infptrace.c (fetch_register, store_inferior_registers): Change
regaddr to type CORE_ADDR.
* config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.
printing the program, rather than passing NULL to printf.
(udi_detach): Set udi_session_id to -1 so that udi_close doesn't
try to call UDIDisconnect again. Print better message.
(udi_kill): Just call UDIDisconnect ourselves, rather than doing
it via udi_close.
(udi_open): Unpush UDI target after target_preopen, now that
udi_kill doesn't pop the target.
(udi_create_inferior): If udi_session_id is negative, open a new
TIP rather than giving an error.
config/ns32k/ns32km3.mh: Define NAT_FILE.
* config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
(it was inconsistent and namespace-wrong) to NM_M3_H.
* m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
(m3_open): New function.
(m3_ops): Use it.
* TODO: Update Mach section.
* Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
New functions.
(mips_store_word): Change calling convention to return errors, and
to provide old contents if the caller wants it.
(mips_xfer_memory): Deal with errors from mips_store_word.
* config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
define now that remote-mips.c doesn't use BREAKPOINT.
declaration because some compilers don't like arguments whose
names are the same as types.
* remote.c (remote_xfer_memory): Cast "myaddr" to unsigned char *
before passing it to remote_*_bytes.
* h8500-tdep.c (saved_pc_after_call): The size of the
pc is memory model dependent. (segmented_command,
unsegmented_command, _initialize_h8500_tdep): New commands to
change memory model.
* remote-7000.c (initialize_remote_e7000): Change name of snoop
command.
* remote-hms.c (hms_load): Remove breakpoints when loaded.
(hms_wait): Use new status structure
(hms_open): Push the target here. (hms_before_main_loop): Not
here. (supply_val, hms_fetch_register, hms_store_register): Cope
with H8/500 names too.
* sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
all registers in a compact way.
an address to 'w'. Make it 'g' or 'h', depending on TARGET_PTR_BIT.
* defs.h: Just typedef CORE_ADDR to bfd_vma. Include bfd.h.
If BFD64, make a LONGEST a BFD_HOST_64_BIT.
* defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
always just check against INT_MIN and INT_MAX (this also fixes things
if sizeof (long) > sizeof (int), e.g. Alpha).
* config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
Don't define LONGEST or BUILTIN_TYPE_LONGEST.
* gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
BUILTIN_TYPE_UNSIGNED_LONGEST.
* language.h, c-lang.c, ch-lang.c, m2-lang.c: Remove longest_int
and longest_unsigned_int.
* value.h (struct value): Just align to LONGEST, rather than worrying
about CC_HAS_LONG_LONG.
* valarith.c (value_binop, _initialize_valarith): Figure out type
ourself based on sizeof (LONGEST) rather than relying on
BUILTIN_TYPE_LONGEST. The point is that we don't depend on
CC_HAS_LONG_LONG anymore.
* valprint.c (val_print_type_code_int): Just call
extract_unsigned_integer directly, rather than going through
unpack_long.
* printcmd.c (decode_format): Remove code which would sometimes
change 'g' size to 'w' for integers. print_scalar_formatted handles
printing huge integers well enough, thank you.
to make this the sfunc, not cfunc, since that is how we call it.
* command.h: Comment difference between sfunc and cfunc.
* demangle.c (set_demangling_command): Add third arg since that
is how it is called.
(_initialize_demangler): Use sfunc, not cfunc, for
set_demangling_command, since that is how it is called.
Remove show_demangling_command; it has no effect.
Change comments regarding TYPE_CODE_BOOL.
* language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
regardless of the language.
(value_true): Just call value_logical_not regardless of language.
* coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
* language.h: Improve comment for la_builtin_type_vector.
* m2-lang.c (_initialize_m2_language): Don't add any fields to
builtin_type_m2_bool.
init_extra_frame_info and put it in new function mips_find_saved_regs.
(READ_FRAME_REG): Remove macro and replace uses with the expansion.
* mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
check if it is NULL and call mips_find_saved_regs if so.
alpha and irix. The _sigtramp case has to be handled properly
in the tdep files if we have no ecoff debugging info.
* alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
mips-tdep.c (mips_frame_saved_pc): Handle signal handler frames
without PC_REGNUM kludge.
* mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
Clean up handling of mips sigtramp frames, improve comments.
* paread.c (pa_symtab_read): Update the "check_strange_names"
filter to match GCC's current output. Filter out section symbols
(which the HP linker sometimes puts in the wrong place).
* Makefile.in: Remove all references to sparcly-nat.c.
* Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
remote-sim.h directly, rather than via $(remote_utils_h). This avoids
duplicating serial.h and target.h.
* Makefile.in: Don't set M_INSTALL and M_UNINSTALL. These variables
are not used anywhere (a 5 Oct 1993 change removed the uses).
If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
to achieve the desired timeout.
* serial.h (serial_t): Add field timeout_remaining.
with the old tm-m68k-em.h:
(GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
(HAVE_68881): Don't undefine; this #define is obsolete.
(REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
Add FIXME regarding GET_LONGJMP_TARGET.
* remote-utils.c (usage): Fix message to be accurate and conform
more closely to normal conventions.
* remote-utils.c (gr_files_info): Have the exec_bfd test control
whether to show information about exec_bfd, and not control whether
to show information about device and speed.
* remote-utils.c (gr_open): If sr_get_device returns NULL, give
usage message, don't dump core.
* remote-bug.c (bug_write_memory): Use alloca, not GCC extension
for variable size array.
(bug_fetch_register, bug_store_register): Rename "value" to
"fpreg_buf" because some compilers don't like variables whose
names are the same as types.
(bug_store_register): Use a cast when converting char * to
unsigned char *.
full details on structure elements without names. This partially
reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
of those changes was accidental.
various miscellaneous things discovered in the process:
* printcmd.c, defs.h (print_address_numeric): New function.
* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
Use it.
* utils.c, defs.h (gdb_print_address): New function.
* expprint (dump_expression), gdbtypes.h: Use it.
* breakpoint.c (describe_other_breakpoints),
symmisc.c (dump_symtab, print_symbol):
Use filtered not unfiltered I/O.
(remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
just run gdb under a debugger for this (and it had problems with
printing addresses, how to print b->shadow, etc.).
* buildsym.c (make_blockvector), core.c (memory_error),
exec.c (print_section_info), maint.c (print_section_table),
mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Add comments saying code is broken. Marked with "FIXME-32x64".
* dbxread.c (process_one_symbol), partial-stab.h (default),
remote-vx.c (vx_run_files_info):
Don't cast int being passed to local_hex_string.
* symmisc.c (print_symbol): Don't cast long being passed to %lx.
* symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
only being a long.
* symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
and LOC_LOCAL.
* printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
* source.c: Include <sys/types.h> regardless of USG.
not OBJ_UNWIND_INFO. Assigning to a cast is a GCC-ism which
the HP compiler in ANSI mode doesn't like.
* main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
based on USG, rather than defining HAVE_SIGSETMASK to an expression
containing defined. This is for the HP compiler in ANSI mode.
