gratuitious whitespace changes.
[!HAVE_SIGPROCMASK]: Call sigsetmask if HAVE_SIGSETMASK is defined.
* top.c: Remove redundant logic to define HAVE_SIGSETMASK.
(sigsetmask) Don't define macro.
(stop_sig) [HAVE_SIGPROCMASK]: Add bit of code snatched from
async_stop_sig from event-top.c.
[!HAVE_SIGPROCMASK]: Call sigsetmask if HAVE_SIGSETMASK is
defined.
* configure.in (AC_CHECK_FUNCS): Put functions in alphabetical
order. Add sigsetmask.
(AC_FUNC_VFORK, AC_FUNC_ALLOCA): Reorder such that they're in
alphabetical order.
* config/xm-aix4.h, config/alpha/xm-alphalinux.h,
config/i386/xm-cygwin.h, config/rs6000/xm-rs6000.h
(HAVE_SIGSETMASK): Remove.
* aclocal.m4, config.in, configure
(AC_FUNC_SETPGRP): Add.
* aclocal.m4, configure, config.in: Regenerated.
* inflow.c (gdb_setpgid): Get rid of NEED_POSIX_SETPGID and
SETPGRP_ARGS. Always use setpgid if it is available, fall back on
setpgrp if it isn't. Use SETPGRP_VOID (defined by autoconf) to
distinguish between the two setpgrp flavours.
* config/xm-sysv4.h, config/arm/xm-linux.h,
config/i386/xm-i386aix.h, config/i386/xm-sco.h,
config/i386/xm-linux.h, config/i386/xm-ptx.h,
config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
config/sparc/xm-linux.h, config/sparc/xm-sun4sol2.h,
config/ia64/xm-linux.h (NEED_POSIX_SETPGID): Remove.
* config/rs6000/xm-rs6000.h (SETPGRP_ARGS): Remove.
(rs6000_in_solib_return_trampoline): Declare.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): New
function.
(rs6000_skip_trampoline_code): Skip bigtoc fixup code.
* xcoffread.c (read_xcoff_symtab): Perform the ISFCN function
check after the CSECT check rather than before it. Allocate
separate symtabs for CSECTs whose names begin with '@'.
(scan_xcoff_symtab): Don't ignore symbols beginning with '@'.
Activate the misc_func_recorded mechanism for whose names begin
with '@'.
* xcoffsolib.c (xcoff_solib_address): Renamed from
pc_load_segment_name. Return NULL if address is not in a shared
library. Cleanup shared library name construction, using xasprintf.
Format shared library member names consistent with format in exec.c.
(solib_info): Format shared library member names consistent with
format in exec.c.
* config/rs6000/nm-rs6000.h: Replace PC_LOAD_SEGMENT with PC_SOLIB,
using xcoff_solib_address for PC_SOLIB definition.
* stack.c (print_frame): Remove PC_LOAD_SEGMENT code, no longer
needed.
SOLIB_SYMBOLS_MANUAL code, cleanup of AIX shared library handling code.
* rs6000-nat.c (vmap_symtab): Do not try to modify offsets
if symbols are not yet loaded.
(vmap_add_symbols): New function to add symbols for a vmap entry.
(add_vmap): Turn errors into warnings, return NULL vmap upon
failure. Add symbols via vmap_add_symbols only if requested.
(xcoff_relocate_core): Allow debugging of core files without an
executable file. Handle NULL returns from add_vmap gracefully.
* xcoffsolib.c (solib_add): Remove, no longer needed.
(solib_info): Do not check for new shared libraries if there is no
inferior process.
(sharedlibrary_command): Made static.
Do not check for new shared libraries if there is no inferior process.
Add symbols for requested shared libraries via vmap_add_symbols.
(_initialize_solib): Add `set auto-solib-add' command.
* xcoffsolib.h (vmap_add_symbols): Add prototype declaration.
* config/rs6000/tm-rs6000.h (PC_LOAD_SEGMENT): Move from here ...
* config/rs6000/nm-rs6000.h: ... to here, this is an AIX native
feature.
* config/powerpc/tm-macos.h, config/powerpc/tm-ppc-eabi.h,
config/powerpc/tm-ppc-nw.h, config/rs6000/tm-rs6000ly.h:
Remove #undef PC_LOAD_SEGMENT.
* config/powerpc/aix.mt, config/rs6000/aix4.mt, config/rs6000/rs6000.mt
(TDEPFILES): Move xcoffsolib.o from here ...
* config/powerpc/aix.mh, config/rs6000/aix4.mh, config/rs6000/rs6000.mh
(NATDEPFILES): ... to here, xcoffsolib.o contains AIX native code
only.
* rs6000-tdep.c: Remove #include xcoffsolib.h, no longer needed.
* xcoffsolib.h (xcoff_relocate_symtab_hook): Remove declaration.
* rs6000-nat.c (_initialize_core_rs6000): Remove setting of
xcoff_relocate_symtab_hook, no longer needed.
* xcoffsolib.c (solib_info, sharedlibrary_command): Remove
xcoff_relocate_symtab_hook indirection, call xcoff_relocate_symtab
directly, as xcoffsolib.c is now compiled in native AIX configurations
only.
* Makefile.in: Update dependencies for rs6000-tdep.o, rs6000-nat.o
and xcoffsolib.o.
* rs6000-tdep.c (DEFAULT_LR_SAVE): Move to config/*/tm-*.h.
(rs6000_gdbarch_init): Use generic_pc_in_call_dummy instead of
rs6000_pc_in_call_dummy.
* config/rs6000/tm-rs6000.h (DEFAULT_LR_SAVE): Move here from
rs6000-tdep.c.
* config/powerpc/tm-ppc-eabi.h: Remove various definitions
handled by multi-arched rs6000-tdep.c.
support. Incorporate most of tm-rs6000.h.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
(read_memory_addr): Define.
(pop_frame): Rename to rs6000_pop_frame.
(rs6000_pop_frame, rs6000_fix_call_dummy, rs6000_push_arguments,
rs6000_frame_saved_pc, rs6000_frame_chain): Remove non-generic
dummy frame handling.
(branch_dest, rs6000_pop_frame, rs6000_skip_trampoline_code,
rs6000_frame_saved_pc, frame_get_saved_regs,
frame_initial_stack_address, rs6000_frame_chain,
rs6000_convert_from_func_ptr_addr): Call read_memory_addr instead
of read_memory_integer.
(branch_dest, rs6000_pop_frame, rs6000_push_arguments,
rs6000_skip_trampoline_code, rs6000_frame_saved_pc,
frame_get_saved_regs, frame_initial_stack_address,
rs6000_frame_chain): Replace 4 with TDEP->wordsize.
(skip_prologue): Recognize some 64-bit stack adjustments.
(push_dummy_frame, pop_dummy_frame, set_processor,
show_processor): Delete.
(frame_get_saved_regs): Manipulate saved register addresses using
CORE_ADDR instead of int.
(rs6000_create_inferior): New function.
(register_names_*[]): Change to struct reg registers_*[].
(variants[]): Assimilate into multi-arch approach.
(register_names_*[], variants[]): Refer to pre-PowerPC
architectures as POWER instead of RS6000.
* rs6000-nat.c: Ubiquitous changes for 64-bit support.
(vmap_secs, xcoff_relocate_symtab): Cast addresses
to unsigned long to avoid sign-extension errors.
(set_host_arch): New function.
(xcoff_relocate_symtab): Try disabling usleep(36000) workaround.
(rs6000_core_fns): Use new bfd_target_xcoff_flavour.
(_initialize_core_rs6000): Initialize rs6000_set_host_arch_hook.
* symfile.c (find_sym_fns): Remove special xcoff kludge.
* xcoffread.c (secnum_to_bfd_section): Initialize args.objfile.
(process_linenos): Query line struct size from coff
backend instead of using compile-time constant.
(enter_line_range): Likewise.
(read_xcoff_symtab): Pass "XCOFF64" instead of "XCOFF" to
record_debugformat() if appropriate.
(process_xcoff_symbol): Access symbol addresses using
SYMBOL_VALUE_ADDRESS instead of SYMBOL_VALUE.
(read_symbol_lineno): Retrieve XCOFF64 symbol names from strtbl.
(scan_xcoff_symtab): Likewise. Query syment struct size from
coff backend instead of using compile-time constant.
(xcoff_sym_fns): Set flavour to bfd_target_xcoff_flavour.
* Makefile.in (INTERNAL_LDFLAGS): Add $(MH_LDFLAGS) to list of flags
that this Makefile variable get set to. (From Kevin Buettner.)
* config/powerpc/aix.mh (MH_LDFLAGS): Add linker flags so that
the TOC doesn't overflow. (From Kevin Buettner.)
* config/powerpc/tm-ppc-aix.h: Move config decisions to
multi-arched rs6000-tdep.c.
* config/rs6000/tm-rs6000.h: Likewise.
(GDB_MULTI_ARCH): Define.
(skip_trampoline_code): Rename to rs6000_skip_trampoline_code.
(is_magic_function_pointer): Replace with
rs6000_convert_from_func_ptr_addr.
(TARGET_CREATE_INFERIOR_HOOK): Define.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
* config/rs6000/nm-rs6000.h (CHILD_XFER_MEMORY): Define.
* valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
more function-like.
(default_coerce_float_to_double, standard_coerce_float_to_double):
New functions.
(value_arg_coerce): Adjust for new definition.
* value.h (default_coerce_float_to_double,
standard_coerce_float_to_double): New declarations for the above.
* gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
* gdbarch.c, gdbarch.h: Regenerated.
* tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
definitions.
* mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
function here.
(mips_gdbarch_init): Install that as our coerce_float_to_double
function.
Add two pointers (saved_regs, extra_info) to struct frame_info.
Introduce new macro FRAME_INIT_SAVED_REGS which replaces
FRAME_FIND_SAVED_REGS.
Document.
Use in mn10300 and rs6000 targets. Fix side effects on ALPHA, MIPS,
Z8K and SPARC targets.
* config/xm-aix4.h (SIGWINCH_HANDLER): Function `aix_resize_window'
must accept a signal number as parameter.
* config/rs6000/xm-rs6000.h (SIGWINCH_HANDLER): Ditto.
* utils.c (initialize_utils): Give a parameter to `SIGWINCH_HANDLER'.
* inferior.h (register_valid): Variable's type is `SIGNED char', not
`char'.
* findvar.c (register_valid): Ditto.
* defs.h (make_cleanup_func): Protect parameter list by `PARAMS'.
* gdbthread.h (unbind_target_thread_vector): Likewise.
