2005-09-14 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (tc_x86_regname_to_dw2regnum): Add selector
registers, floating point control and status words, and mxcsr as
well as (for 64-bit code) segment base registers and rflags.
* config/tc-msp430.c (msp430_operands): Undo last changes. Instead...
(msp430_relax_frag): add a guard check to ensure that final fr_subtype
has been reached.
(dwarf2_set_isa): New.
(dwarf2_directive_loc): Rearrange to allow all options on one line.
* dwarf2dbg.h (dwarf2_set_isa): Declare.
* doc/as.texinfo: Update .loc documentation.
* gas/lns/lns-common-1.d: Don't match header or special opcode numbers.
* gas/lns/lns-common-1.s: Update for syntax change.
* gas/lns/lns-diag-1.[sl]: Likewise.
(mips_opts): Add -1 to initialize ase_mt.
(file_ase_mt): New variable for -mmt.
(CPU_HAS_MT): New define.
(validate_mips_insn): Add supports for +t, +T, !, $, *, &, g operand
formats.
(mips_ip): Check ase_mt to enable MT instructions.
Handle !, $, *, &, +T, +t, g operand formats.
For "mftc1", "mfthc1", "cftc1", "mttc1", "mtthc1", "cttc1", we allow
odd float registers.
(OPTION_MT, OPTION_NO_MT): New define.
(OPTION_COMPAT_ARCH_BASE): Change because of inserting MT define.
(md_parse_option): Parse OPTION_MT and OPTION_NO_MT.
(mips_after_parse_args): Set ase_mt based on CPU.
(s_mipsset): Handle ".set mt" and ".set nomt".
(mips_elf_final_processing): Remind of adding new flag for MT ASE.
(md_show_usage): Show usage of -mmt and -mno-mt.
* doc/as.texinfo: Document -mmt and -mno-mt options.
* doc/c-mips.texi: Likewise, and document ".set mt" and ".set nomt"
directives.
bfd/
* libbdf.h: Regenerate.
* bfd-in2.h: Regenerate.
* reloc.c: Add BFD_RELOC_ARM_T32_CP_OFF_IMM and
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
gas/
* config/tc-arm.c (encode_arm_cp_address): Use
BFD_RELOC_ARM_T32_CP_OFF_IMM in thumb mode.
(do_iwmmxt_wldstbh): Use BFD_RELOC_ARM_T32_CP_OFF_IMM_S2 in thumb
mode.
(md_assemble): Only allow coprocessor instructions when Thumb-2 is
available.
(cCE, cC3): Define.
(insns): Use them for coprocessor instructions.
(md_pcrel_from_section): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM.
(get_thumb32_insn): New function.
(put_thumb32_insn): New function.
(md_apply_fix): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM and
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
gas/testsuite/
* gas/arm/vfp-bad_t2.d, gas/arm/vfp-bad_t2.l, arm/vfp-bad_t2.s,
gas/arm/vfp1_t2.d, gas/arm/vfp1_t2.s, gas/arm/vfp1xD_t2.d,
gas/arm/vfp1xD_t2.s, gas/arm/vfp2_t2.d, gas/arm/vfp2_t2.s): New files.
opcodes/
* arm-dis.c (coprocessor_opcodes): New.
(arm_opcodes, thumb32_opcodes): Remove coprocessor insns.
(print_insn_coprocessor): New function.
(print_insn_arm): Use print_insn_coprocessor. Remove coprocessor
format characters.
(print_insn_thumb32): Use print_insn_coprocessor.
when the frags are different for the 2 instructions we want to
swap. If the lengths of the 2 instructions are not the same, we
won't do the swap but emit an nop.
2005-08-26 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (intel_e09): Set JumpAbsolute when seeing a PTR-
qualified operand of a branch.
(intel_bracket_expr): Set JumpAbsolute here...
(intel_e11): ... rather than here.
gas/testsuite/
2005-08-26 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.s: Adjust.
* gas/i386/intelok.s: Add two more insns.
* gas/i386/intelok.d: Adjust.
2005-08-26 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (intel_operand_size): New, broken out from OP_E for
re-use.
(OP_E): Call intel_operand_size, move call site out of mode
dependent code.
(OP_OFF): Call intel_operand_size if suffix_always. Remove
ATTRIBUTE_UNUSED from parameters.
(OP_OFF64): Likewise.
(OP_ESreg): Call intel_operand_size.
(OP_DSreg): Likewise.
(OP_DIR): Use colon rather than semicolon as separator of far
jump/call operands.
gas/testsuite/
2005-08-26 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.d: Adjust.
(mips_opts): Add -1 to initialize ase_dsp.
(file_ase_dsp): New variable for -mdsp.
(CPU_HAS_DSP): New define.
(validate_mips_insn): Add supports for 3, 4, 5, 6, 7, 8, 9, 0, ', :, @
operand formats.
(mips_ip): Add min_range and max_range for checking singed numbers.
Check ase_dsp to enable DSP instructions.
Handle 3, 4, 5, 6, 7, 8, 9, 0, ', :, @ operand formats.
(OPTION_DSP, OPTION_NO_DSP): New define.
(OPTION_COMPAT_ARCH_BASE): Change because of inserting DSP define.
(md_parse_option): Parse OPTION_DSP and OPTION_NO_DSP.
(mips_after_parse_args): Set ase_dsp based on CPU.
(s_mipsset): Handle ".set dsp" and ".set nodsp".
(mips_elf_final_processing): Remind of adding new flag for DSP ASE.
(md_show_usage): Show usage of -mdsp and -mno-dsp.
2005-08-22 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (object_64bit): New.
(i386_target_format): Initialize it.
(output_disp): Use object_64bit for relocation type determination.
(output_imm): Likewise.
(i386_validate_fix): Likewise.
(tc_gen_reloc): Likewise.
(lex_got): Likewise. Remove static mode_name. Change array size
of gotrel's rel field, and adjust its initializer. Adjust diagnostic.
(x86_cons): Use object_64bit for deciding whether quad fields can
have relocations.
gas/testsuite/
2005-08-22 Jan Beulich <jbeulich@novell.com>
* gas/i386/mixed-mode-reloc.s, gas/i386/mixed-mode-reloc32.d,
gas/i386/mixed-mode-reloc64.d: New.
* gas/i386/i386.exp: Run new tests.
* cofflink.c (_bfd_coff_generic_relocate_section): Correct
comment.
gas
* config/obj-coff.c (obj_coff_weak): Set auxiliary record
of NT weak externals to IMAGE_WEAK_EXTERN_SEARCH_NOLIBRARY.
* config/tc-msp430.c (msp430_enable_relax): New flag.
(msp430_enable_polys): Likewise.
(OPTION_RELAX): New option.
(OPTION_POLYMORPHS): Likewise.
(md_longopts): New long options.
(md_show_usage): Updated.
(md_parse_option): Add new options handler.
(msp430_operands): Add check if polymorph insns are enabled.
(msp430_force_relocation_local): New function.
(md_apply_fix): Now delete relocs according to new flags combination.
(msp430_relax_frag): Convert long branches to short branches only if
flag msp430_enable_relax is set.
* config/tc-msp430.h (TC_FORCE_RELOCATION_LOCAL): Defined.
(msp430_force_relocation_local): Likewise.
* doc/c-msp430.texi: Describe new options.
* macro.c (getstring): Do not treat round parentheses exactly the same as angle
brackets - the parentheses need to be preserved and passed on to the macro processing code.
gas/
* config/tc-arm.c (current_it_mask, current_cc): New variables.
(do_t_add_sub): Use correct encodings inside IT block.
(do_t_arit3c): Ditto.
(do_t_it): Simplify logic. Set current_it_mask and current_cc.
(md_assemble): Verify conditional suffixes agains IT blocks.
gas/testsuite/
* gas/arm/thumb32.s: Use correct conditional suffixes inside IT
blocks.
* gas/arm/thumb2_it.d, gas/arm/thumb2_it.s: New test.
instruction.
gas/arm/iwmmxt-bad2.s: New file: Check for error messages about erroneous
offsets in iwmmxt instructions. Cannot be part of iwmmxt-bad.s because
the errors there stop the assembler before it gets to check the offsets
in instructions.
gas/arm/iwmmxt-bad2.d: New file.
gas/arm/iwmmxt-bad2.l: New file: Expected error messages.
gas/arm/iwmmxt.s: Change the offset values of the WLDRD, WSTRD and WSTRW
instructions to be larger than +/-255.
gas/arm/iwmmxt.d: Fix the expected results for these instructions.
2005-07-26 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (optimize_imm): Calculate candidate immediates
mask from guessed suffix, but mask out other immediate types only
if at least on candidate is valid for the insn.
gas/testsuite/
2005-07-26 Jan Beulich <jbeulich@novell.com>
* gas/i386/immed32.[sd]: New.
* gas/i386/immed64.[sd]: New.
* gas/i386/i386.exp: Run new tests.
2005-07-18 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (md_begin): Use IS_ELF.
(tc_i386_fix_adjustable): Likewise.
(md_estimate_size_before_relax): Likewise.
(md_apply_fix): Likewise.
(i386_target_format): Likewise.
(lex_got): Define to NULL when not ELF or when LEX_AT. Check IS_ELF.
(i386_immediate): Remove #ifdef LEX_AT.
(i386_displacement): Likewise.
* config/tc-i386.h (x86_cons): Prototype only when ELF and when not
LEX_AT.
2005-07-18 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (reloc): Convert to ISO C90. Change first
parameter to unsigned. Parameter sign now is tristate - zero/
positive mean unsigned/signed, negative means signedness doesn't
matter. Check field size,
signedness, and pcrel-ness are in agreement between relocated field
and relocation type. Adjust diagnostics.
(optimize_imm): And type mask of operand instead of overwriting it.
(lex_got): Convert to ISO C90. Add third parameter. Add new field to
local structure and initialize gotrel accordingly. Pass caller as
mask of types that the operator can match.
(x86_cons_fix_new): Let reloc know that signedness of relocation
doesn't matter.
(x86_pe_cons_fix_new): Likewise.
(x86_cons): Pass additional argument to lex_got.
(i386_immediate): New local variable 'types'. Pass its address as
additional argument to lex_got. Mask out operand types not supported
befoe returning.
(i386_displacement): Likewise. Set bigdisp to all types supported in
64-bit mode, combining the previously split initialization.
gas/testsuite/
2005-07-18 Jan Beulich <jbeulich@novell.com>
* gas/i386/reloc32.[sdl]: New.
* gas/i386/reloc64.[sdl]: New.
* gas/i386/i386.exp: Run new tests.
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
