* disasm.c (gdb_disassemble_info): Set endian_code.
* gdbarch.sh (gdbarch_info): New field byte_order_for_code.
* gdbarch.h, gdbarch.c: Regenerate.
* arch-utils.c (initialize_current_architecture): Set the
default byte_order_for_code.
(gdbarch_info_init): Ditto.
(gdbarch_info_fill): Ditto.
* arm-tdep.c (SWAP_INT, SWAP_SHORT): New macros.
(thumb_analyze_prologue): Swap halfword if code endianness is
different from general endianness.
(arm_skip_prologue): Similarly.
(arm_scan_prologue): Ditto.
(thumb_get_next_pc): Ditto.
(arm_get_next_pc): Ditto.
(arm_gdbarch_init): Set byte_order_for_code from BE8 flag,
choose correct endianness for breakpoints.
call.
* cp-name-parser.y: Include "config.h".
* xml-tdesc.c (fetch_xml_from_file): Properly cast sentinel in
concat call.
* gdb_select.h: Include sys/time.h if sys/select.h is not
available.
(go32_stop, go32_kill_inferior): Delete the main thread.
(go32_create_inferior): Add it.
(go32_thread_alive, go32_pid_to_str): New.
(init_go32_ops): Register go32_thread_alive and go32_pid_to_str.
gdbarch to i386_fp_regnum_p and i386_fpc_regnum_p.
(go32_xfer_memory): Change type of myaddr parameter to gdb_byte.
(struct seg_descr, struct seg_descr): pack the whole struct
instead of each member individually.
DT_HP_DEBUG_PRIVATE. Add warning if DT_HP_DEBUG_PRIVATE is not set.
Revise comment.
(pa64_current_sos): Remove map private warning warning.
* solib-som.c: Include string.h and sys/utsname.h.
(get_hpux_major_release): New function.
(som_solib_create_inferior_hook): Read dynamic linker header. Warn
about shared library private mapping on HP-UX 11 and later. Only force
private mapping of shared libraries on HP-UX 10 and earlier.
(link_map_start): Delete warning.
H.J. Lu <hongjiu.lu@intel.com>
Mark Kettenis <kettenis@gnu.org>
* amd64-tdep.c (amd64_frame_cache): Add saved_sp_reg.
(amd64_init_frame_cache): Initialize saved_sp_reg.
(amd64_analyze_stack_align): New.
(amd64_analyze_prologue): Call it.
(amd64_frame_cache): Use saved_sp_reg if it is invalid. Don't set
%rip to 8 when halfway aligning the stack.
* amd64-tdep.h (amd64_regnum): Add AMD64_R9_REGNUM to
AMD64_R14_REGNUM.
* i386-tdep.c (i386_frame_cache): Remove stack_align. Add
saved_sp_reg.
(i386_alloc_frame_cache): Remove stack_align. Initialize
saved_sp_reg to -1.
(i386_analyze_stack_align): Rewrite.
(i386_frame_cache): Use saved_sp_reg if it is valid.
(target_pre_inferior): Call no_shared_libraries.
* infcmd.c (run_command_1): Do not call objfile_purge_solibs
or clear_solib.
(attach_command): Do not call clear_solib.
(remote_m32r_ptid): New.
(m32r_close): Delete the main thread.
(m32r_resume): Set inferior_ptid toA remote_m32r_ptid. Add the
main thread.
(m32r_kill, m32r_load, sdireset_command): Delete the main thread.
(_initialize_remote_m32r): Initialize remote_m32r_ptid.
* spu-tdep.c (info_spu_dma_cmdlist): Only show entries with
the valid bit set. Ensure display order respects partial
order defined by dependency bits.
testsuite/ChangeLog:
* gdb.arch/spu-info.exp: Updated for "info spu dma" changes.
standard Tcl configury bits.
Remove all Tcl, Tk, Itcl, Itk, etc definitions.
* configure.ac: Don't check if ../itcl exists when building
gdbtk. It could be installed.
Rewrite gdbtk configury to allow for using system-supplied
Tcl and Tk. Gdbtk no longer requires build-time access to
itcl and itk.
* Makefile.in: Remove everything related to itcl and itk.
Rewrite the Tcl bits for gdbtk to correspond to rewrite of
configure.ac.
Remove v850ice.o build rule.
(ALL_TCL_CFLAGS): New convenience defintion. Change all
gdbtk sources to use it.
* configure: Regenerate.
(linux_nat_has_pending_sigint): New function, based on
linux_nat_has_pending.
(set_ignore_sigint, maybe_clear_ignore_sigint): New functions.
(stop_wait_callback): Remove flush_mask handling. Honor
ignore_sigint. Call maybe_clear_ignore_sigint. Pass NULL
to recursive calls.
(linux_nat_has_pending, flush_callback): Remove.
(linux_nat_filter_event): Check for ignore_sigint.
(linux_nat_wait): Remove flush_mask support and call to
flush_callback. Use set_ignore_sigint and maybe_clear_ignore_sigint.
* linux-nat.h (struct lwp_info): Add ignore_sigint field.
* gdb.threads/manythreads.exp: Use remote_expect instead of after.
Add a test for duplicated SIGINTs.
report events from resumed threads.
* gdb.threads/schedlock.exp (get_args): Update to work for any
value of NUM.
(Top level): Report the number of threads that did not resume.
PR gdb/1158:
* valops.c (value_struct_elt): Treat function-valued field as a
static method.
gdb/testsuite:
* gdb.base/callfuncs.c (struct struct_with_fnptr): New struct.
(function_struct, function_struct_ptr): New globals.
* gdb.base/callfuncs.exp (do_function_calls): Test calling via a
function pointer in a struct.
128-bit long doubles in even-odd pairs of FPRs. Do not
right-align float arguments for big-endian.
(mips_n32n64_return_value): Apply return value convention for
structs containing one or two floating-point values to soft-float
as well as hard-float. Handle 128-bit long doubles in such
structs.
(mips_o32_push_dummy_call): Only skip one integer register for a
float argument passed in an FPR.
Chris Demetriou <cgd@google.com>
* elfread.c (elf_symfile_segments): Fix the check that each loadable
section fits within an ELF segment to handle ELF segments that hit
the end of the address space.
* frame.c (frame_unwind_address_in_block): Delete.
(get_frame_address_in_block): Do not use it. Check the type
of the next frame first.
(frame_cleanup_after_sniffer): Update comment.
* frame.h (frame_unwind_address_in_block): Delete prototype.
* hppa-tdep.c (hppa_find_unwind_entry_in_block): Update comment.
(get_frame_func): Do not use it.
* frame.h (frame_func_unwind): Delete prototype.
* hppa-tdep.c (hppa_frame_cache): Update comment.
* rs6000-tdep.c (rs6000_frame_cache): Update comment.
(mips_n32n64_push_dummy_call, mips_o64_return_value)
(mips_eabi_push_dummy_call): Update call to fp_register_arg_p.
(MIPS_FPU_TYPE): Add gdbarch as parameter and replace current_gdbarch.
(fp_register_arg_p, mips_dump_tdep, show_mipsfpu_command)
(mips_n32n64_fp_arg_chunk_p): Update caller.
(mips_n32n64_fp_arg_chunk_p): Add gdbarch as paramter.
(mips_n32n64_push_dummy_call): Update caller.
(MIPS_LAST_ARG_REGNUM): Add gdbarch as parameter and replace
current_gdbarch.
(mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call)
(mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update caller.
(MIPS_LAST_FP_ARG_REGNUM): Add gdbarch as parameter and replace
current_gdbarch.
(mips_eabi_push_dummy_call, mips_o32_push_dummy_call)
(mips_o64_push_dummy_call): Update caller.
(MIPS_EABI): Add gdbarch as parameter and replace current_gdbarch.
(fp_register_arg_p, mips_dump_tdep): Update caller.
(set_reg_offset): Add gdbarch as parameter and replace current_gdbarch.
(mips16_scan_prologue, mips32_scan_prologue): Update caller.
(reset_saved_regs): Make static. Add gdbarch as parameter. Replace
current_gdbarch.
(mips32_scan_prologue): Update caller.
(heuristic_proc_start): Add gdbarch as parameter. Replace
current_gdbarch.
(mips_insn16_frame_cache, mips_insn32_frame_cache): Update caller.
* mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Use get_regcache_arch to get at
the current architecture. Update call to getregs_supplies.
(getregs_supplies): Add gdbarch as parameter and replace
current_gdbarch.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use get_frame_arch to
get at the current architecture. Update call to NBSD_MIPS_JB_OFFSET and
NBSD_MIPS_JB_ELEMENT_SIZE.
(NBSD_MIPS_JB_ELEMENT_SIZE, NBSD_MIPS_JB_OFFSET): Add gdbarch and
replace current_gdbarch.
* remote-mips.c (mips_map_regno): Add gdbarch as parameter and replace
current_gdbarch.
(mips_fetch_registers, mips_store_registers): Update call
to mips_map_regno.
(mips_load): Use get_regcache_arch to get at the current_architecture
and replace current_gdbarch.
Rewrite continuations internals on top of cleanups and plug
continuation arguments leaks.
* defs.h (struct continuation): Make it opaque.
(add_continuation, add_intermediate_continuation): Drop the int
argument of the continuation hook argument. Add
continuation_free_args argument.
(do_all_continuations, do_all_intermediate_continuations): Drop
the error_p argument.
* utils.c (add_continuation): Drop the int argument of the
continuation hook argument. Add continuation_free_args argument.
Reimplement on top of cleanups.
(do_all_continuations): Drop error argument. Reimplement on top
of cleanups.
(discard_all_continuations): Reimplement on top of cleanups.
(add_intermediate_continuation): Drop the int argument of the
continuation hook argument. Add continuation_free_args argument.
Reimplement on top of cleanups.
(do_all_intermediate_continuations): Drop error argument.
Reimplement on top of cleanups.
(discard_all_intermediate_continuations): Reimplement on top of
cleanups.
* breakpoint.c (until_break_command_continuation): Drop error
argument. Add xfree as continuation argument deleter.
* inf-loop.c (inferior_event_handler): On error, discard all
continuations. Adjust to new do_all_intermediate_continuations
and do_all_continuations interfaces.
* infcmd.c (step_1_continuation): Drop error_p argument. Adjust.
Pass xfree as continuation argument deleter.
(finish_command_continuation): Drop error_p argument. Adjust.
(finish_command_continuation_free_arg): New.
(finish_command): Pass finish_command_continuation_free_arg as
continuation argument deleter. Adjust to new do_all_continuations
interfaces.
(attach_command_continuation): Drop error_p argument.
(attach_command_continuation_free_args): New.
(attach_command): Pass attach_command_continuation_free_args as
continuation argument deleter.
* interps.c (interp_set): Adjust to new do_all_continuations
interfaces.
* event-top.c (stdin_event_handler): In error, also discard the
intermediate continuations.
* top.c (execute_command): Remove unused arg1 and arg2 locals.
* breakpoint.c (struct until_break_command_continuation_args):
New.
(until_break_command_continuation): Take a void* instead of a
continuations_arg. Adjust.
(until_break_command): Adjust to use struct
until_break_command_continuation_args instead of struct
continuation_arg.
* infcmd.c (struct step_1_continuation_args): New.
(step_1_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct step_1_continuation_args.
(step_once): Adjust to use struct step_1_continuation_args.
(struct finish_command_continuation_args): New.
(finish_command_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct
finish_command_continuation_args.
(finish_command): Adjust to use struct
finish_command_continuation_args.
(struct attach_command_continuation_args): New.
(attach_command_continuation): Take a void* instead of a
continuations_arg. Adjust to use struct
attach_command_continuation_args.
(attach_command): Adjust to use struct
attach_command_continuation_args.
* defs.h (struct continuation_arg): Delete.
(struct continuation): Replace the struct continuation_arg*
parameter of continuation_hook by a void*. Replace "arg_list"
member by a new "args" member with void* type.
(add_continuation, add_intermediate_continuation): Replace struct
continuation_arg type usages by void* usages.
* utils.c (add_continuation, do_all_continuations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): Replace struct
continuation_arg type usages by void* usages. Pass "args" instead
of "arg_list".
* infrun.c (struct thread_stepping_state): Delete sal member.
(init_thread_stepping_state): Add local sal. Use it instead of
tss->sal.
(handle_inferior_event): New local stop_pc_sal. Use it instead of
tss->sal.
(step_into_function): Add local stop_func_sal. Use it instead of
tss->sal.
* gdbthread.h (find_thread_id): Declare.
* thread.c (find_thread_id): Make non-static.
* mi/mi-main.c (mi_cmd_execute): Switch to the right
thread and frame, if necessary.
* mi/mi-parse.c (mi_parse): Handle --thread and --frame.
* mi/mi-parse.h (strcut mi_parse): New fields thread and frame.
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
* infcmd.c (proceed_thread_callback, do_context_switch_to): New.
(continue_command): Add "-a" option.
(interrupt_target_command): Add "-a" option.
(_initialize_infcmd): Add extend help of continue and interrupt
command to mention the new "-a" option. Mark "continue" async ok.
* linux-nat.c (linux_test_for_tracefork): Block events while we're
here.
(get_pending_status): Implement non-stop mode.
(linux_nat_detach): Stop threads before detaching.
(linux_nat_resume): In non-stop mode, always resume only a single
PTID.
(linux_handle_extended_wait): On a clone event, in non-stop mode,
add new lwp to GDB's thread table, and mark as running, executing
and stopped appropriately.
(linux_nat_filter_event): Don't assume there are other running
threads when a thread exits.
(linux_nat_wait): Mark the main thread as running and executing.
In non-stop mode, don't stop all lwps.
(linux_nat_kill): Stop lwps before killing them.
(linux_nat_thread_alive): Use signal 0 to detect if a thread is
alive.
(send_sigint_callback): New.
(linux_nat_stop): New.
(linux_nat_add_target): Set to_stop to linux_nat_stop.
* linux-nat.h (thread_db_attach_lwp): Declare.
* linux-thread-db.c (thread_get_info_callback): Check for new
threads if we have none.
(thread_from_lwp, enable_thread_event): Set proc_handle.pid to the
stopped lwp. Check for new threads if we have none.
(thread_db_attach_lwp): New.
(thread_db_init): Set proc_handle.pid to inferior_ptid.
(check_event): Set proc_handle.pid to the stopped lwp.
(thread_db_find_new_threads): Set proc_handle.pid to any stopped
lwp available, bail out if there is none.
* linux-fork.c (linux_fork_killall): Use SIGKILL instead of
PTRACE_KILL.
