This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
Running catch-syscall.exp against a gdbserver that actually supports
it, we get:
FAIL: gdb.base/catch-syscall.exp: continue until exit (the program exited)
FAIL: gdb.base/catch-syscall.exp: continue until exit (the program exited)
FAIL: gdb.base/catch-syscall.exp: continue until exit (the program exited)
FAIL: gdb.base/catch-syscall.exp: continue until exit at catch syscall with unused syscall (mlock) (the program exited)
FAIL: gdb.base/catch-syscall.exp: continue until exit (the program exited)
The fail pattern is:
Catchpoint 2 (call to syscall exit_group), 0x000000323d4baa29 in _exit () from /lib64/libc.so.6
(gdb) PASS: gdb.base/catch-syscall.exp: program has called exit_group
delete breakpoints
Delete all breakpoints? (y or n) y
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) break exit
Breakpoint 3 at 0x323d438bf0
(gdb) continue
Continuing.
[Inferior 1 (process 21081) exited normally]
That "break exit" + "continue" comes from:
> # gdb_continue_to_end:
> # The case where the target uses stubs has to be handled specially. If a
> # stub is used, we set a breakpoint at exit because we cannot rely on
> # exit() behavior of a remote target.
> #
The native-gdbserver.exp board, used to test against gdbserver in
"target remote" mode, triggers that case ($use_gdb_stub is true). So
gdb_continue_to_end doesn't work for catch-syscall.exp as here we
catch the exit_group and continue from that, expecting to see a real
program exit. I was about to post a patch that changes
catch-syscall.exp to call a new function that just always does what
gdb_continue_to_end does in the !$use_gdb_stub case. But, since
GDBserver doesn't really need this, in the end I thought it better to
teach the testsuite that there are stubs that know how to report
program exits, by adding a new "exit_is_reliable" board variable that
then gdb_continue_to_end checks.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/testsuite/
2013-10-02 Pedro Alves <palves@redhat.com>
* README (Board Settings): Document "exit_is_reliable".
* lib/gdb.exp (gdb_continue_to_end): Check whether the board says
running to exit reliably reports program exits.
* boards/native-gdbserver.exp: Set exit_is_reliable in the board
info.
* boards/native-stdio-gdbserver.exp: Likewise.
This fixes dwz.exp on 32-bit targets. It does so by introducing a new
"default" setting for the address size in the DWARF assembler.
Built and regtested on x86-64 Fedora 18.
I also ran the gdb.dwarf2 tests on an x86 machine (gcc45).
* lib/dwarf.exp (cu, tu): Handle addr_size of "default". Change
default addr_size.
* lib/gdb.exp (is_64_target): New gdb_caching_proc.
I noticed that skip_btrace_tests is a classic "caching proc" that I
missed when I added gdb_caching_proc. This patch converts it.
Built and regtested on x86-64 Fedora 18.
* lib/gdb.exp (skip_btrace_tests): Use gdb_caching_proc and
standard_temp_file.
In an earlier patch I forgot to change the caching proc in cell.exp to
use standard_temp_file. This fixes the oversight.
Tested on x86-64 Fedora 18.
* lib/cell.exp (skip_cell_tests): Use standard_temp_file.
This finishes making gdb.dwarf2 parallel-safe.
To do this, this patch introduces a new gdb_remote_download proc, that
works somewhat differently in the one specific case where it matters:
for a copy to "host", if no destination was given, and the host is not
actually remote, then standard_output_file is used. In parallel mode
this guarantees that the resulting file will end up in a parallel-safe
location.
Tested on x86-64 Fedora 18.
* gdb.dwarf2/dw2-basic.exp: Use gdb_remote_download.
* gdb.dwarf2/dw2-compressed.exp: Use gdb_remote_download.
* gdb.dwarf2/dw2-intercu.exp: Use gdb_remote_download.
* gdb.dwarf2/dw2-intermix.exp: Use gdb_remote_download.
* gdb.dwarf2/dw2-producer.exp: Use gdb_remote_download.
* gdb.dwarf2/mac-fileno.exp: Use gdb_remote_download.
* lib/gdb.exp (gdb_remote_download): New proc.
This introduces parallel mode for the test suite.
It doesn't fully work yet in the sense that if you do a fully parallel
run, you will encounter some file-name clashes, but this has to start
somewhere, and it seemed best to add some infrastructure now, so that
you can follow along and test subsequent patches if you care to.
This patch has two parts.
First, it checks for the GDB_PARALLEL variable. If this is set (say,
on the runtest command line), then the test suite assumes "parallel
mode". In this mode, files are put into a subdirectory named after
the test. That is, for DIR/TEST.exp, the outputs are put into
./outputs/DIR/TEST/.
This first part has various follow-on changes coming in subsequent
patches. This is why the code in this patch also makes "temp" and
"cache" directories.
Second, this adds an "inotify" mode. If you have the inotifywait
command (part of inotify-tools), you can set the GDB_INOTIFY variable.
This will tell the test suite to watch for changes outside of the
allowed output directories.
This mode is useful for debugging the test suite, as it issues a
report whenever a possibly parallel-unsafe file open is done.
2013-08-13 Tom Tromey <tromey@redhat.com>
Yao Qi <yao@codesourcery.com>
* lib/cache.exp (gdb_do_cache): Handle GDB_PARALLEL.
* lib/gdb.exp: Handle GDB_PARALLEL.
(default_gdb_version): Kill inotify_pid if it exists.
(default_gdb_exit): Emit warning if the inotify log is not
empty.
(standard_output_file): Respect GDB_PARALLEL.
(standard_temp_file): Likewise.
(gdb_init): Start inotifywait if requested.
* gdbint.texinfo (Testsuite): Use @table, not @itemize.
Document GDB_PARALLEL and GDB_INOTIFY.
In the fully parallel mode, each .exp file can be run in parallel (at
least conceptually -- the actual split may not be so severe). This
means that procs that compute a result and cache it are not going to
function very well. The test they run will be invoked over and over.
This patch introduces a generic caching mechanism and changes various
result-caching procs to use it. This is a cleanup to introduce the
basic change; the results aren't written to disk yet.
A caching proc is defined using gdb_caching_proc, which works like
"proc", except that it caches the result of the body.
* lib/cache.exp: New file.
* lib/cell.exp (skip_cell_tests): Use gdb_caching_proc.
* lib/gdb.exp: Load cache.exp.
(support_complex_tests, is_ilp32_target, is_lp64_target)
(is_amd64_regs_target, skip_altivec_tests, skip_vsx_tests)
(gdb_skip_xml_test): Use gdb_caching_proc.
* lib/opencl.exp (skip_opencl_tests): Use gdb_caching_proc.
This adds a new helper proc, standard_temp_file. This proc takes a
file name and returns a possibly-qualified form. This lets us make
parallel runs use a directory other than ".", which helps the inotify
mode.
This initial patch introduces the proc and changes a few spots to use
it.
* lib/gdb.exp (standard_temp_file): New proc.
(support_complex_tests, is_ilp32_target, is_lp64_target)
(is_amd64_regs_target, skip_altivec_tests, skip_vsx_tests): Use
standard_temp_file.
A few spots in lib make output files, either in "." or in
$objdir/$subdir.
This patch changes these spots to use standard_output_file.
This help the parallelization project.
* lib/gdb.exp (build_id_debug_filename_get): Use
standard_output_file.
* lib/prelink-support.exp (section_get)
(build_executable_own_libs): Use standard_output_file.
* lib/gdb.exp (gdb_compile_shlib): Pass the tail name of
$dest to link options if host is remote. Move the
generated file to $dest.a on host if host is remote.
* lib/future.exp (gdb_default_target_compile): Use tail name
of $destfile as the output name of compile. Move the
generated file to $destfile on build.
* lib/gdb.exp (gdb_compile): Set
gdb_saved_set_unbuffered_mode_obj to
set_unbuffered_mode_saved.o if host is remote. Invoke
remote_download to copy $unbuf_obj to host.
PR symtab/15391 is a failure with the DW_OP_GNU_implicit_pointer
feature.
I tracked it down to a logic error in read_pieced_value. The code
truncates this_size_bits according to the type size and offset too
early -- it should do it after taking bits_to_skip into account.
This patch fixes the bug.
While testing this, I also tripped across a latent bug because
indirect_pieced_value does not sign-extend where needed. This patch
fixes this bug as well.
Finally, Pedro pointed out that a previous version implemented sign
extension incorrectly. This version introduces a new gdb_sign_extend
function for this. A couple of notes on this function:
* It has the gdb_ prefix to avoid clashes with various libraries that
felt free to avoid proper namespacing. There is a "sign_extend"
function in a Tile GX header, in an SOM-related BFD header (and in
sh64-tdep.c and as a macro in arm-wince-tdep.c, but those are
ours...)
* I looked at all the sign extensions in gdb and didn't see ones that
I felt comfortable converting to use this function; in large part
because I don't have a good way to test the conversion.
Built and regtested on x86-64 Fedora 18. New test cases included;
this required a minor addition to the DWARF assembler. Note that the
DWARF CU made by implptrpiece.exp uses a funny pointer size in order
to show the sign-extension bug on all platforms.
* dwarf2loc.c (read_pieced_value): Truncate this_size_bits
after taking bits_to_skip into account. Sign extend byte_offset.
* utils.h (gdb_sign_extend): Declare.
* utils.c (gdb_sign_extend): New function.
* gdb.dwarf2/implptrpiece.exp: New file.
* gdb.dwarf2/implptrconst.exp (d): New variable.
Print d.
* lib/dwarf2.exp (Dwarf::_location): Handle DW_OP_piece.
python-selftest.exp fails with an error when using the
native-gdbserver.exp board.
The bug is that the selftest code doesn't work in this situation. It
never has.
This patch fixes the problem by pushing the needed check into
do_self_tests. This helps prevent the problem in the future.
* lib/selftest-support.exp (do_self_tests): Reject remote or
non-native targets.
* gdb.gdb/complaints.exp: Remove check.
* gdb.gdb/observer.exp: Remove check.
* gdb.gdb/xfullpath.exp: Remove check.
* gdb.gdb/complaints.exp: Remove check.
Gary Benson <gbenson@redhat.com>
* lib/gdb.exp (build_executable_from_specs): Use gdb_compile_pthread,
gdb_compile_shlib or gdb_compile_shlib_pthreads where appropriate.
* lib/prelink-support.exp (build_executable_own_libs): Allow INTERP
to be set to "no" to indicate that no ld.so copy should be made.
* gdb.base/break-interp.exp (solib_bp): New constant.
(reach_1): Use the above instead of "_dl_debug_state".
(test_attach): Likewise.
(test_ld): Likewise.
* gdb.threads/dlopen-libpthread.exp: New file.
* gdb.threads/dlopen-libpthread.c: Likewise.
* gdb.threads/dlopen-libpthread-lib.c: Likewise.
* gdb.base/solib-corrupted.exp: Disable test if GDB is using probes.
* gdb.base/range-stepping.exp: Skip the rest of tests if the
test fails.
* lib/range-stepping-support.exp (exec_cmd_expect_vCont_count):
Return 0 if the test passes, otherwise return 1.
This adds tests to verify range stepping is used as expected, by
inspecting the RSP traffic, looking for vCont;s and vCont;r packets.
gdb/testsuite/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.base/range-stepping.c: New file.
* gdb.base/range-stepping.exp: New file.
* gdb.trace/range-stepping.c: New file.
* gdb.trace/range-stepping.exp: New file.
* lib/range-stepping-support.exp: New file.
Add option to link testcases with Pthreads library when
using 'prepare_for_testing' in tests.
testsuite/
* lib/gdb.exp (build_executable_from_specs): Use
gdb_compile_pthreads to compile if option "pthreads" is
specified.
If a tracepoint's actions list includes a while-stepping action, and
then the actions are changed to a list without any while-stepping
action, the tracepoint's step_count will be left with a stale value.
For example:
(gdb) trace subr
Tracepoint 1 at 0x4004d9: file ../../../src/gdb/testsuite//actions-changed.c, line 31.
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $reg
>end
(gdb) set debug remote 1
(gdb) tstart
Sending packet: $QTinit#59...Packet received: OK
Sending packet: $QTDP:1:00000000004004d9:E:0:0-#a3...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:R03FFFFFFFFFFFFFFFFFF#2b...Packet received: OK
(gdb) tstop
Sending packet: $QTStop#4b...Packet received: OK
Sending packet: $QTNotes:#e8...Packet received: OK
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $reg
>while-stepping 1
>collect $reg
>end
>end
(gdb) tstart
Sending packet: $QTinit#59...Packet received: OK
Sending packet: $QTDP:1:00000000004004d9:E:1:0-#a4...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:R03FFFFFFFFFFFFFFFFFF-#58...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:SR03FFFFFFFFFFFFFFFFFF#7e...Packet received: OK
(gdb) tstop
Sending packet: $QTStop#4b...Packet received: OK
Sending packet: $QTNotes:#e8...Packet received: OK
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $regs
>end
(gdb) tstart
Sending packet: $QTinit#59...Packet received: OK
Sending packet: $QTDP:1:00000000004004d9:E:1:0-#a4...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:R03FFFFFFFFFFFFFFFFFF#2b...Packet received: OK
The last "$QTDP:1:00000000004004d9:E:1:0-#a4" should be "$QTDP:1:00000000004004d9:E:0:0-#a3".
In pseudo-diff:
-$QTDP:1:00000000004004d9:E:1:0-#a4
+$QTDP:1:00000000004004d9:E:0:0-#a3
A related issue is that the "commands" command actually supports
setting commands to a range of breakpoints/tracepoints at once. But,
hacking "maint info breakpoints" to print t->step_count, reveals:
(gdb) trace main
Tracepoint 5 at 0x45a2ab: file ../../src/gdb/gdb.c, line 29.
(gdb) trace main
Note: breakpoint 5 also set at pc 0x45a2ab.
Tracepoint 6 at 0x45a2ab: file ../../src/gdb/gdb.c, line 29.
(gdb) commands 5-6
Type commands for breakpoint(s) 5-6, one per line.
End with a line saying just "end".
> while-stepping 5
>end
> end
(gdb) maint info breakpoints 5
Num Type Disp Enb Address What
5 tracepoint keep y 0x000000000045a2ab in main at ../../src/gdb/gdb.c:29 inf 1
step_count=5
^^^^^^^^^^^^
while-stepping 5
end
not installed on target
(gdb) maint info breakpoints 6
Num Type Disp Enb Address What
6 tracepoint keep y 0x000000000045a2ab in main at ../../src/gdb/gdb.c:29 inf 1
step_count=0
^^^^^^^^^^^^
while-stepping 5
end
not installed on target
(gdb)
that tracepoint 6 doesn't end up with the correct step_count.
The issue is that here:
static void
do_map_commands_command (struct breakpoint *b, void *data)
{
struct commands_info *info = data;
if (info->cmd == NULL)
{
struct command_line *l;
if (info->control != NULL)
l = copy_command_lines (info->control->body_list[0]);
else
{
struct cleanup *old_chain;
char *str;
str = xstrprintf (_("Type commands for breakpoint(s) "
"%s, one per line."),
info->arg);
old_chain = make_cleanup (xfree, str);
l = read_command_lines (str,
info->from_tty, 1,
(is_tracepoint (b)
? check_tracepoint_command : 0),
b);
do_cleanups (old_chain);
}
info->cmd = alloc_counted_command_line (l);
}
validate_actionline is never called for tracepoints other than the
first (the copy_command_lines path). Right below, we have:
/* If a breakpoint was on the list more than once, we don't need to
do anything. */
if (b->commands != info->cmd)
{
validate_commands_for_breakpoint (b, info->cmd->commands);
incref_counted_command_line (info->cmd);
decref_counted_command_line (&b->commands);
b->commands = info->cmd;
observer_notify_breakpoint_modified (b);
}
And validate_commands_for_breakpoint looks like the right place to put
a call; if we reset step_count there too, we have a nice central fix
for the first issue as well, because trace_actions_command calls
breakpoint_set_commands that also calls
validate_commands_for_breakpoint.
We end up calling validate_actionline twice for the first tracepoint,
since read_command_lines calls it too, through
check_tracepoint_command, but that should be harmless.
2013-04-04 Pedro Alves <palves@redhat.com>
Hui Zhu <hui@codesourcery.com>
* breakpoint.c (validate_commands_for_breakpoint): If validating a
tracepoint, reset its STEP_COUNT and call validate_actionline.
2013-04-04 Stan Shebs <stan@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.trace/Makefile.in (PROGS): Add actions-changed.
* gdb.trace/actions-changed.c: New file.
* gdb.trace/actions-changed.exp: New file.
* lib/trace-support.exp (gdb_trace_setactions): Rename to ...
(gdb_trace_setactions_command): ... this. Add "actions_command"
parameter, and handle it.
(gdb_trace_setactions, gdb_trace_setcommands): New procedures.
When I tried running the btrace tests, I noticed something odd in the gdb.log file:
(gdb) run
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace22343.x
Breakpoint 1, main () at /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace22343.c:1
1 /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace22343.c: No such file or directory.
^^^^^^^^^^^^^^^^^^^^^^^^^
(gdb) record btrace
Target does not support branch tracing.
(gdb) testcase ../../../src/gdb/testsuite/gdb.btrace/enable.exp completed in 0 seconds
I knew that the btrace tests on my machine weren't supposed to work,
but still, that error made me wonder if the test had something broken,
and waste a few minutes looking up where that is coming from.
The issue is that the btrace detection deletes the source file right
after compiling it, and before GDB has a chance to open it. It's
really harmless, but I'd rather spare others from going through the
same exercise.
We now get the regular:
(gdb) run
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace24210.x
...
Breakpoint 1, main () at /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace24210.c:1
1 int main(void) { return 0; }
...
gdb/testsuite/
2013-03-26 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (skip_btrace_tests): Delay deleting the source file
until after GDB has run.
* breakpoint.c (print_one_breakpoint_location): Add MI
field 'thread-groups' when printing a breakpoint.
(output_thread_groups): New function.
2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
* gdb.texinfo (GDB/MI Breakpoint Commands): Document new
'thread-groups' field when printing a breakpoint in MI.
2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
* gdb.mi/mi-break.exp: Expect new 'thread-groups' field.
* gdb.mi/mi-nsmoribund.exp: Expect new 'thread-groups' field.
Also handle 'thread' field.
* gdb.mi/mi-simplerun.exp: Expect new 'thread-groups' field.
* gdb.mi/mi-watch.exp: Ditto.
* lib/mi-support.exp: Ditto.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* gdb.base/charset.exp: Change print syntax for Python 3
compatibility.
* gdb.python/py-block.exp: Ditto.
* gdb.python/py-breakpoint.exp: Ditto.
* gdb.python/py-cmd.exp: Ditto.
* gdb.python/py-events.py: Ditto.
* gdb.python/py-finish-breakpoint.py: Ditto.
* gdb.python/py-finish-breakpoint2.exp: Ditto.
* gdb.python/py-finish-breakpoint2.py: Ditto.
* gdb.python/py-frame-inline.exp: Ditto.
* gdb.python/py-frame.exp: Ditto.
* gdb.python/py-infthread.exp: Ditto.
* gdb.python/py-objfile.exp: Ditto.
* gdb.python/py-parameter.exp: Ditto.
* gdb.python/py-progspace.exp: Ditto.
* gdb.python/py-prompt.exp: Ditto.
* gdb.python/py-symbol.exp: Ditto.
* gdb.python/py-symtab.exp: Ditto.
* gdb.python/py-template.exp: Ditto.
* gdb.python/py-value-cc.exp: Ditto.
* gdb.python/python.exp: Ditto.
* gdb.python/source2.py: Ditto.
* gdb.python/lib-types.exp: Change print syntax for Python 3
compatibility.
Use sorted() function rather than sort() method.
Accept either int or long values for enum values.
* gdb.python/py-events.exp: Use exec(open(...).read()) instead of
execfile for Python 3 compatibility.
* gdb.python/py-evsignal.exp: Ditto.
* gdb.python/py-evthreads.exp: Ditto.
* gdb.python/py-mi.exp: Ditto.
* gdb.python/py-pp-maint.exp: Ditto.
* gdb.python/py-prettyprint.exp: Ditto.
* gdb.python/py-finish-breakpoint.exp: Change print syntax for
Python 3 compatibility.
Skip tests for Python 2.4.
* gdb.python/py-inferior.exp: Change print syntax for
Python 3 compatibility.
Use byte string rather than character string in memory write test
if Python 3.
* gdb.python/py-pp-maint.py: Change class declarations to "new
class" syntax.
* gdb.python/py-prettyprint.py: Change iterator class to generator
function for Python 3 compatibility.
Make all classes "new style".
Fix indentation issue and stray semicolon.
* gdb.python/py-shared.expChange print syntax for Python 3
compatibility.
Define "long" if Python 3.
* gdb.python/py-type.exp: Change print syntax for Python 3
compatibility.
Accept either int or long values for enum values.
* gdb.python/py-value.exp: Change print syntax for Python 3
compatibility.
Skip "long" and "unicode" tests if Python 3.
Accept either "type" or "class" in type checks.
* lib/gdb.exp (gdb_py_is_py3k): New flag set if Python 3.
(gdb_py_is_py24): New flag set if Python 2.4 or 2.5.
