This is the remaining issue impeding GDB to build with "-Wpointer-sign
-Werror" with Fedora 17's i686-w64-mingw32 cross toolchain.
../../src/gdb/ser-tcp.c: In function 'net_read_prim':
../../src/gdb/ser-tcp.c:341:3: error: pointer targets in passing argument 2 of 'recv' differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/serial.h:23:0,
from ../../src/gdb/ser-tcp.c:21:
/usr/i686-w64-mingw32/sys-root/mingw/include/winsock2.h:983:34: note: expected 'char *' but argument is of type 'unsigned char *'
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* ser-tcp.c (net_read_prim): Cast second argument to recv to
'void *'.
Currently, several commands take "0" or "-1" to mean "unlimited".
"show" knows when to print "unlimited":
(gdb) show height
Number of lines gdb thinks are in a page is 45.
(gdb) set height 0
(gdb) show height
Number of lines gdb thinks are in a page is unlimited.
However, the user can't herself specify "unlimited" directly:
(gdb) set height unlimited
No symbol table is loaded. Use the "file" command.
(gdb)
This patch addresses that, by adjusting the set handler for all
integer/uinteger/zuinteger_unlimited commands to accept literal
"unlimited". It also installs a completer. Presently, we complete on
symbols by default, and at
<http://sourceware.org/ml/gdb-patches/2013-03/msg00864.html> I've
shown a WIP prototype that tried to keep that half working in these
commands. In the end, it turned out to be more complicated than
justifiable, IMO. It's super rare to want to pass the value of a
variable/symbol in the program to a GDB set/show knob. That'll still
work, it's just that we won't assist with completion anymore. This
patch just sticks with the simple, and completes on "unlimited", and
nothing else. This simplification means that
"set he<tab><tab>"
is all it takes to get to:
"set height unlimited"
The patch then goes through all integer/uinteger/zuinteger_unlimited
commands in the tree, and updates both the online help and the manual
to mention that "unlimited" is accepted in addition to 0/-1. In the
cases where the command had no online help text at all, this adds it.
I've tried to make the texts read in a way that "unlimited" is
suggested before "0" or "-1" is.
Tested on x86_64 Fedora 17.
gdb/
2013-04-10 Pedro Alves <palves@redhat.com>
* cli/cli-decode.c (integer_unlimited_completer): New function.
(add_setshow_integer_cmd, add_setshow_uinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd): Install the "unlimited"
completer.
* cli/cli-setshow.c: Include "cli/cli-utils.h".
(is_unlimited_literal): New function.
(do_set_command): Handle literal "unlimited" arguments.
* frame.c (_initialize_frame) <set backtrace limit>: Document
"unlimited".
* printcmd.c (_initialize_printcmd) <set print
max-symbolic-offset>: Add help text.
* record-full.c (_initialize_record_full) <set record full
insn-number-max>: Likewise.
* record.c (_initialize_record) <set record
instruction-history-size, set record function-call-history-size>:
Add help text.
* ser-tcp.c (_initialize_ser_tcp) <set tcp connect-timeout>: Add
help text.
* tracepoint.c (_initialize_tracepoint) <set trace-buffer-size>:
Likewise.
* source.c (_initialize_source) <set listsize>: Add help text.
* utils.c (initialize_utils) <set height, set width>: Likewise.
<set pagination>: Mention "set height unlimited".
* valprint.c (_initialize_valprint) <set print elements, set print
repeats>: Document "unlimited".
gdb/doc/
2013-04-10 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Process Record and Replay): Document that "set
record full insn-number-max", "set record
instruction-history-size" and "set record
function-call-history-size" accept "unlimited".
(Backtrace): Document that "set backtrace limit" accepts
"unlimited".
(List): Document that "set listsize" accepts "unlimited".
(Print Settings)" Document that "set print max-symbolic-offset",
"set print elements" and "set print repeats" accept "unlimited".
(Starting and Stopping Trace Experiments): Document that "set
trace-buffer-size" accepts "unlimited".
(Remote Configuration): Document that "set tcp connect-timeout"
accepts "unlimited".
(Command History): Document that "set history size" accepts
"unlimited".
(Screen Size): Document that "set height" and "set width" accepts
"unlimited". Adjust "set pagination"'s description to suggest
"set height unlimited" instead of "set height 0".
gdb/testsuite/
2013-04-10 Pedro Alves <palves@redhat.com>
* gdb.base/completion.exp: Test "set height", "set listsize" and
"set trace-buffer-size" completion.
* gdb.base/setshow.exp: Test "set height unlimited".
* gdb.trace/trace-buffer-size.exp: Test "set trace-buffer-size
unlimited".
The "set tcp connect-timeout" variable is unsigned:
/* Timeout period for connections, in seconds. */
static unsigned int tcp_retry_limit = 15;
And used like:
/* Check for timeout. */
if (*polls > tcp_retry_limit * POLL_INTERVAL)
{
errno = ETIMEDOUT;
return -1;
}
Which made me stop and look over why is it that 'polls' is signed.
What I found is there's really no reason.
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* ser-tcp.c (wait_for_connect): Make 'polls' parameter unsigned.
(net_open): Make 'polls' local unsigned.
tcp_retry_limit is installed as variable of an unsigned command:
add_setshow_uinteger_cmd ("connect-timeout", class_obscure,
&tcp_retry_limit, _("\
and I found no uses of the variable treating it as signed (like < 0
checks or some such).
2013-03-07 Pedro Alves <palves@redhat.com>
* ser-tcp.c (tcp_retry_limit): Change type to unsigned int.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
gdb/
* ser-tcp.c (net_open): Check error return from socket() call by its
equality to -1 not by it being negative.
(net_close): Likewise.
gdb/gdbserver/
* gdbreplay.c (remote_open): Check error return from socket() call by
its equality to -1 not by it being negative.
* remote-utils.c (remote_open): Likewise.
sim/arm/
* communicate.c (MYread_char): Check error return from accept() call
by its equality to -1 not by it being negative.
(MYread_charwait): Likewise.
* main.c (main): Likewise for both socket() and accept() calls.
sim/common/
* dv-sockser.c (dv_sockser_init): Check error return from socket()
call by its equality to -1 not by it being negative.
(connected_p): Likewise for accept() call.
sim/cris/
* dv-rv.c (hw_rv_init_socket): Check error return from socket() call
by its equality to -1 not by it being negative.
(hw_rv_write): Likewise.
(hw_rv_handle_incoming): Likewise.
(hw_rv_poll_once): Likewise.
* rvdummy.c (setupsocket): Likewise.
(main): Likewise for accept() call as returned from setupsocket().
sim/m32c/
* main.c (setup_tcp_console): Check error return from socket() call
by its equality to -1 not by it being negative.
* scm-exp.c: White space.
* scm-lang.c: White space.
* scm-valprint.c: White space.
* sentinel-frame.c: White space.
* ser-base.c: White space.
* ser-go32.c: White space.
* serial.c: White space.
* ser-mingw.c: White space.
* ser-pipe.c: White space.
* ser-tcp.c: White space.
* ser-unix.c: White space.
* solib.c: White space.
* solib-darwin.c: White space.
* solib-frv.c: White space.
* solib-irix.c: White space.
* solib-osf.c: White space.
* solib-pa64.c: White space.
* solib-som.c: White space.
* solib-spu.c: White space.
* solib-svr4.c: White space.
* solib-target.c: White space.
* source.c: White space.
* stabsread.c: White space.
* stack.c: White space.
* std-regs.c: White space.
* symfile.c: White space.
* symmisc.c: White space.
* symtab.c: White space.
gdb/
* ser-tcp.c: Adjust includes.
(tcp_set_cmdlist, tcp_show_cmdlist): Declare.
(tcp_auto_retry, tcp_retry_limit): Declare.
(TIMEOUT): Remove, in favor of tcp_retry_limit.
(POLL_INTERVAL): Increase to 5, in favor of backoff logic.
(wait_for_connect): New function.
(net_open): Use it. Add auto-retry logic.
(set_tcp_cmd, show_tcp_cmd): New functions.
(_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
and "set/show tcp connect-timeout" commands.
* NEWS: Document new commands.
gdb/doc/
* gdb.texinfo (Remote Configuration): Document new
"set/show tcp auto-retry" and "set/show tcp connect-timeout"
commands.
* ser-tcp.c (ser_tcp_send_break): New function.
(_initialize_ser_tcp): Use ser_tcp_send_break.
* ser-tcp.h (ser_tcp_send_break): New prototype.
2008-09-03 Angela Marie Thomas <angela@releasedominatrix.com>
* gdb.texinfo (Interrupts): Mention TCP interface for
sending BREAK.
* Makefile.in (gdb_select_h, ser_tcp_h): New.
(ALLDEPFILES): Add ser-mingw.c.
(event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o)
(ser-tcp.o, ser-unix.o): Update.
(ser-mingw.o): New rule.
* configure: Regenerated.
* configure.ac: Add ser-mingw.o for mingw32.
* ser-mingw.c: New file.
* event-loop.c: Include "gdb_select.h".
(gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c.
* ser-base.c: Include "gdb_select.h".
(ser_base_wait_for): Use gdb_select.
* serial.c (serial_for_fd): New function.
(serial_fdopen): Try "terminal" before "hardwire". Initialize
the allocated struct serial.
(serial_wait_handle): New function.
* serial.h (serial_for_fd, serial_wait_handle): New prototypes.
(struct serial_ops) [USE_WIN32API]: Add wait_handle.
* gdb_select.h: New file.
* ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include.
(net_close, net_read_prim, net_write_prim): Make global.
(net_open): Likewise. Pass an exception set to select. Whitespace fix.
Document why we can not use gdb_select.
(_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here.
* ser-tcp.h: New file.
* inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here.
(handle_sigio): Use gdb_select.
(initialize_stdin_serial): New function.
* terminal.h (initialize_stdin_serial): New prototype.
* top.c (gdb_init): Call initialize_stdin_serial.
* mingw-hdep.c (gdb_select): New function, moved from gdb_select in
event-loop.c. Add exception condition support. Use serial_for_fd
and serial_wait_handle. Fix timeout handling.
* posix-hdep.c: Include "gdb_select.h".
(gdb_select): New function.
* remote-st.c (connect_command): Use gdb_select.
* ser-unix.c: Include "gdb_select.h".
(hardwire_send_break, wait_for): Use gdb_select.
* command.h (add_setshow_integer_cmd): Make VAR an integer.
* cli/cli-decode.c (add_setshow_integer_cmd): Update to match.
* valops.c (value_string): Add a cast.
* eval.c (evaluate_subexp_standard): Use gdb_byte for byte buffers.
* breakpoint.c (re_enable_breakpoints_in_shlibs): Use gdb_byte for
byte buffers.
* target.h (struct target_ops): For to_insert_hw_breakpoint and
to_remove_hw_breakpoint use gdb_byte for byte buffer parameters.
* breakpoint.h (struct bp_location): Make shadow_contents a
gdb_byte buffer.
* cli/cli-setshow.c (do_setshow_command): Fix cast.
* cli/cli-dump.c (restore_section_callback)
(restore_binary_file): Use gdb_byte for byte buffers.
* proc-service.c (ps_ptwrite, ps_ptread, ps_pdwrite): Fix casts.
(ps_xfer_memory): Use gdb_byte for byte buffers.
* tracepoint.c (mem2hex): Use gdb_byte for byte buffers, and char
for string buffers.
* ser-tcp.c (net_open): Make len a socklen_t.
-lws2_32.
* ser-tcp.c (<winsock2.h>): Include, for Windows.
(ETIMEDOUT): Define, for Windows.
(ioctl): Likewise.
(closesocket): Define, for POSIX.
(net_open): Adjust for differences in socket functions between
Windows and UNIX.
(net_close): Likweise.
(net_read_prim): New function.
(net_write_prim): Likewise.
(_initialize_ser_tcp): Initialize winsock. Fill in read_prim and
write_prim.
* ser-unix.h (ser_unix_readcchar): Remove.
(ser_unix_read_prim): Declare.
(ser_unix_write_prim): Likewise.
* ser-unix.c (generic_readchar): Move to ser-base.c.
(ser_unix_wait_for): Likewise.
(do_unix_readchar): Likewise.
(ser_unix_readchar): Likewise.
(_initialize_ser_hardwire): Initialize read_prim and write_prim.
(ser_unix_read_prim): New function.
(ser_unix_write_prim): Likewise.
* ser-base.h (generic_readchar): Declare.
(ser_base_readchar): Likewise.
* ser-base.c (<winsock2.h>): Include, for windows.
(fd_event): Use the read primitive specified by the serial
interface.
(ser_base_wait_for): Moved from ser-unix.c
(do_ser_base_read_char): Likewise.
(generic_readchar): Likewise.
(ser_base_readchar): Likewise.
(ser_base_write): Use the write primitive specified by the serial
interface.
* ser-pipe.c (_initialize_ser_pipe): Use ser_base_readchar, not
ser_unix_readchar. Initialize read_prim and write_prim.
* serial.c (struct serial_ops): Add read_prim and write_prim.
* configure: Regenerate.
* ser-tcp.c: Include <netinet/udp.h>. Rename tcp_open
and tcp_close to net_open and net_close.
(net_open): Accept "udp:" and "tcp:" specifications. Connect
using UDP if requested. Don't try to disable Nagle on UDP
sockets.
* remote.c (remote_serial_open): New function. Warn about UDP.
(remote_open_1, remote_async_open_1, remote_cisco_open): Call it.
2002-05-14 Daniel Jacobowitz <drow@mvista.com>
* gdb.texinfo (Debug Session): Document new `udp:' and `tcp:'
options for `target remote'.
* serial.h: Add a note to serial_open.
* ser-tcp.c (tcp_open): Rewrite to use a non-blocking connect.
Allow UI and CLI to abort connect. Instead of trying 15 times
with very long timeouts, just try one connect with a maximum timeout
of 15 seconds.
(gdbtk_test): Use PATH_MAX for home var calculation.
* remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as Win32 in
test.
* ser-tcp.c: Use modern __CYGWIN__ conditional.
* source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test.
(openp): Ditto.
* symfile.c (symfile_bfd_open): Ditto.
* gdbtk/generic/gdbtk.c: Ditto.
