Commit 6423214f (testsuite: Don't use expect_background to reap
gdbserver) broke a couple tests that set gdbserver_reconnect_p and
restart gdb before reconnecting, because a gdb_exit (e.g., through
clean_restart) exits gdbserver unconditionally.
Fixes, with --target_board=native-gdbserver:
-FAIL: gdb.trace/mi-tracepoint-changed.exp: reconnect: break-info 1
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: tracepoint created
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: tracepoint on marker is installed
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: break-info 1
-FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv1 created
-FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv2 created
+PASS: gdb.trace/mi-tsv-changed.exp: upload: tsv1 created
+PASS: gdb.trace/mi-tsv-changed.exp: upload: tsv2 created
gdb/testsuite/
2015-04-16 Pedro Alves <palves@redhat.com>
* lib/gdbserver-support.exp (gdb_exit): If gdbserver_reconnect_p
is set, don't exit gdbserver.
Hi,
When I run gdb.threads/non-stop-fair-events.exp on arm-linux target,
I see the following message in the debugging log,
displaced: breakpoint is gone: Thread 22518, step(1)^M
Sending packet: $vCont;s:p57f3.57f6#9d...
^^^^^^^^^
GDB sends vCont;s by mistake, and GDBserver fails on assert. GDB
doesn't consider software single step in infrun.c:displaced_step_fixup,
/* Go back to what we were trying to do. */
step = currently_stepping (tp);
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog,
"displaced: breakpoint is gone: %s, step(%d)\n",
target_pid_to_str (tp->ptid), step);
target_resume (ptid, step, GDB_SIGNAL_0);
The patch is to let GDB consider software single step here. It fixes
fails in gdb.threads/non-stop-fair-events.exp on arm.
gdb:
2015-04-16 Yao Qi <yao.qi@linaro.org>
* infrun.c (maybe_software_singlestep): Declare.
(displaced_step_fixup): Call maybe_software_singlestep.
The test case s390-vregs.exp yields compile errors on 31-bit targets
as well as when using a GCC that defaults to an older "-march=". This
patch fixes these issues.
gdb/testsuite/ChangeLog:
* gdb.arch/s390-vregs.S (change_vrs): Replace exrl by an
appropriate .insn, such that an older assembler can be used.
* gdb.arch/s390-vregs.exp: Add the compile flag -mzarch, to enable
the z/Architecture instruction set on 31-bit targets as well.
On s390x targets some of the Go test cases fail because the first
breakpoint happens to be at the same spot as the breakpoint at
main.main. When such a test case tries to continue to the first
breakpoint, the program runs until the end instead, and the test fails
like this:
FAIL: gdb.go/handcall.exp: Going to first breakpoint (the program exited)
This patch removes all the handling related to the first breakpoint in
those cases. After applying the patch, the tests run successfully on
s390x.
gdb/testsuite/ChangeLog:
* gdb.go/handcall.exp: Remove all logic related to the first
breakpoint and rely on go_runto_main instead.
* gdb.go/strings.exp: Likewise.
* gdb.go/unsafe.exp: Likewise.
* gdb.go/hello.exp: Likewise. Also rename the remaining
breakpoint marker to "breakpoint 1".
* gdb.go/handcall.go: Remove comment "set breakpoint 1 here".
* gdb.go/strings.go: Likewise.
* gdb.go/unsafe.go: Likewise.
* gdb.go/hello.go: Likewise. Also remove the second occurrence of
"set breakpoint 2 here" and rename the remaining breakpoint marker
to "breakpoint 1".
"info fun foo" can be a pain when it's not interruptable,
especially if you're not exactly sure of what you're looking for
and provide something that matches too much.
gdb/ChangeLog:
* dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
This patch puts rdrand and rdseed in prefix_table so that invalid
prefixes for rdrand and rdseed are handled properly.
gas/testsuite/
PR binutils/17898
* gas/i386/prefix.s: Add rdrand/rdseed prefix tests.
* gas/i386/prefix.d: Updated.
opcodes/
PR binutils/17898
* i386-dis.c (PREFIX_0FC7_REG_6): Renamed to ...
(PREFIX_MOD_0_0FC7_REG_6): This.
(PREFIX_MOD_3_0FC7_REG_6): New.
(PREFIX_MOD_3_0FC7_REG_7): Likewise.
(prefix_table): Replace PREFIX_0FC7_REG_6 with
PREFIX_MOD_0_0FC7_REG_6. Add PREFIX_MOD_3_0FC7_REG_6 and
PREFIX_MOD_3_0FC7_REG_7.
(mod_table): Replace PREFIX_0FC7_REG_6 with
PREFIX_MOD_0_0FC7_REG_6. Use PREFIX_MOD_3_0FC7_REG_6 and
PREFIX_MOD_3_0FC7_REG_7.
2015-04-15 Renlin Li <renlin.li@arm.com>
opcodes/:
* arm-dis.c (thumb32_opcodes): Define 'D' format control code,
use it for ssat and ssat16.
(print_insn_thumb32): Add handle case for 'D' control code.
gas/testsuite/:
* gas/arm/arch7em.d: Adjust required ssat and ssat16 immediate field.
* gas/arm/thumb32.d: Likewise.
Some missing parentheses and one itertools.imap (Py2) vs map (Py3) issue.
gdb/ChangeLog:
* python/lib/gdb/command/unwinders.py: Add parentheses.
gdb/testsuite/ChangeLog:
* gdb.python/py-framefilter.py (ErrorFilter.filter): Use map function
if itertools.imap is not present.
* gdb.python/py-objfile.exp: Add parentheses.
* gdb.python/py-type.exp: Same.
* gdb.python/py-unwind-maint.py: Same.
When I "set debug displaced 1" to fix fail in
gdb.base/disp-step-syscall.exp, the debug message is wrong. This
patch is to fix it.
gdb:
2015-04-15 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
Hi,
I see this fail on arm-linux target,
FAIL: gdb.base/disp-step-syscall.exp: fork: single step over fork final pc
which is caused by the PC isn't expected after displaced stepping the
svc instruction. The code is:
=> 0xb6ead9a4 <__libc_do_syscall+4>: svc 0
0xb6ead9a6 <__libc_do_syscall+6>: pop {r7, pc}
0xb6ead9a8: nop.w^M
0xb6ead9ac: nop.w
after single step svc instruction, pc should be 0xb6ead9a6, but the
actual value of pc is 0xb6ead9a8. The problem is illustrated by
turning on debug message of displaced stepping,
stepi^M
displaced: stepping Thread 12031 now^M
displaced: saved 0x8574: 02 bc 6a 46 04 b4 01 b4 df f8 10 c0 4d f8 04 cd 03 48 04 4b ff f7 d2 ef ff f7 e8 ef 0d 87 00 00 ^M
displaced: process thumb insn df00 at b6ead9a4^M
displaced: copying svc insn df00^M
displaced: read r7 value 00000078^M
displaced: sigreturn/rt_sigreturn SVC call not in signal trampoline frame^M
displaced: writing insn df00 at 00008574^M
displaced: copy 0xb6ead9a4->0x8574: displaced: check mode of b6ead9a4 instead of 00008574^M
displaced: displaced pc to 0x8574^M
displaced: run 0x8574: 00 df 01 de ^M
displaced: restored Thread 12031 0x8574^M
displaced: PC is apparently 00008576 after SVC step (within scratch space)^M
displaced: writing pc b6ead9a8 <----- WRONG ADDRESS
GDB writes the wrong address back to pc because GDB thinks the
instruction size is 4, which isn't true for thumb instruction.
This patch is to replace 4 with dsc->insn_size.
gdb:
2015-04-15 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_cleanup_svc): Use
dsc->insn_size instead of 4.
I see many fails in gdb.dwarf2/dynarr-ptr.exp on arm-linux target,
started from this
print foo.three_ptr.all^M
Cannot access memory at address 0x107c8^M
(gdb) FAIL: gdb.dwarf2/dynarr-ptr.exp: print foo.three_ptr.all
print foo.three_ptr.all(1)^M
Cannot access memory at address 0x107c8
It turns out that ":$ptr_size" is used incorrectly.
array_ptr_label: DW_TAG_pointer_type {
{DW_AT_byte_size :$ptr_size }
^^^^^^^^^^
{DW_AT_type :$array_label}
}
Since the FORM isn't given, and it starts with the ":", it is regarded
as a label reference by dwarf assembler. The generated asm file on
x86_64 is
.uleb128 6 /* Abbrev (DW_TAG_pointer_type) */
.4byte 8 - .Lcu1_begin <----- WRONG
.4byte .Llabel2 - .Lcu1_begin
Looks .Lcu1_begin is 0 on x86_64 and that is why this test passes on
x86_64. On arm, .Lcu1_begin is an address somewhere, and the value
of DW_AT_byte_size is a very large number, so memory read request
of such large length failed.
This patch is to remove ":" and set the form explicitly. The generated
asm file on x86_64 becomes
.uleb128 6 /* Abbrev (DW_TAG_pointer_type) */
.byte 8
.4byte .Llabel2 - .Lcu1_begin
gdb/testsuite:
2015-04-15 Yao Qi <yao.qi@linaro.org>
* gdb.dwarf2/dynarr-ptr.exp (assemble): Use $ptr_size instead
of ":$ptr_size" and set its form explicitly.
I see the following two timeout fails on pandaboard (arm-linux target),
FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (timeout)
FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: continue until exit (timeout)
In this test, more than one watchpoint is used, so the following
watchpoint requests fall back to software watchpoint, so that GDB
will single step all the way and it is very slow.
This patch is to copy the fix from
[PATCH] GDB/testsuite: Correct gdb.base/watchpoint-solib.exp timeout tweak
https://sourceware.org/ml/gdb-patches/2014-07/msg00716.html
I find the left-over of this patch review is to factor out code into
a procedure, so I do that in this patch.
Re-run tests watch-bitfields.exp, watchpoint-solib.exp, sigall-reverse.exp,
and until-precsave.exp on pandaboard, no regression.
gdb/testsuite:
2015-04-15 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* gdb.base/watch-bitfields.exp (test_watch_location): Increase
timeout by factor of 4.
(test_regular_watch): Likewise.
* gdb.base/watchpoint-solib.exp: Use with_timeout_factor.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* lib/gdb.exp (with_timeout_factor): New proc.
(gdb_expect): Move some code to ...
(get_largest_timeout): ... here. New procedure.
Now that all the targets are utilizing CPU_PC_{FETCH,STORE}, and the
cpu state is multicore, and the STATE_CPU defines match, we can move
it all to the common code.
This sets up the sim_state structure and the cpu member to match what we
do in most other sims, and what the common code suggests. This is a step
to unifying on the sim-cpu.o object.
This patch adds --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]
to ld for ELF targets to support generating compressed DWARF debug
sections. We always generate .zdebug_* section since section names have
been finalized and they can't be changed easily when compression is
being performed.
bfd/
* bfd-in.h (compressed_debug_section_type): New.
* compress.c (bfd_compress_section_contents): Add an argument
for linker write compression and always generate .zdebug_*
section when linking.
(bfd_init_section_compress_status): Pass FALSE to
bfd_compress_section_contents.
(bfd_compress_section): New function.
* elf.c (elf_fake_sections): For linking, set SEC_ELF_COMPRESS
on DWARF debug sections if COMPRESS_DEBUG is set and rename
section if COMPRESS_DEBUG_GABI_ZLIB isn't set.
(assign_file_positions_for_non_load_sections): Set sh_offset
to -1 if SEC_ELF_COMPRESS is set.
(assign_file_positions_except_relocs): Likwise.
(_bfd_elf_assign_file_positions_for_relocs): Renamed to ...
(_bfd_elf_assign_file_positions_for_non_load): This. Change
return time to bfd_boolean. Compress the section if
SEC_ELF_COMPRESS is set.
(_bfd_elf_write_object_contents): Updated.
(_bfd_elf_set_section_contents): Write section contents to
the buffer if SEC_ELF_COMPRESS is set.
* merge.c: Include "elf-bfd.h".
(sec_merge_emit): Add arguments for contents and offset. Write
to contents with offset if contents isn't NULL.
(_bfd_write_merged_section): Write section contents to the
buffer if SEC_ELF_COMPRESS is set. Pass contents and
output_offset to sec_merge_emit.
* elflink.c (bfd_elf_final_link): Allocate the buffer for
output section contents if SEC_ELF_COMPRESS is set.
* section.c (SEC_ELF_COMPRESS): New.
* bfd-in2.h: Regenerated.
gas/
* as.h (compressed_debug_section_type): Removed.
include/
* bfdlink.h (bfd_link_info): Add compress_debug.
ld/
* ld.texinfo: Document --compress-debug-sections=.
* ldmain.c (main): Set BFD_COMPRESS on output_bfd if
COMPRESS_DEBUG is set. Set BFD_COMPRESS_GABI on output_bfd
for COMPRESS_DEBUG_GABI_ZLIB.
* lexsup.c (elf_static_list_options): Add
--compress-debug-sections=.
* emultempl/elf32.em (OPTION_COMPRESS_DEBUG): New.
(xtra_long): Add "compress-debug-sections".
(gld${EMULATION_NAME}_handle_option): Handle
OPTION_COMPRESS_DEBUG.
ld/testsuite/
* ld-elf/compress.exp (build_tests): Add tests for
--compress-debug-sections=.
(run_tests): Likewise.
Add additonal tests for --compress-debug-sections=.
* ld-elf/gabiend.rt: New file.
* ld-elf/gabinormal.rt: Likewise.
* ld-elf/gnubegin.rS: Likewise.
* ld-elf/gnunormal.rS: Likewise.
* ld-elf/zlibbegin.rS: Likewise.
* ld-elf/zlibnormal.rS: Likewise.
* sim-release.sh (tar_compress): If there's a fifth parameter,
use that in the getver call instead of $tool.
(sim_release): Pass gdb as fifth parameter to tar_compress.
(SIM_SUPPORT_DIRS): Add gdb/common/create-version.sh.
gas * config/tc-rl78.h (TC_LINKRELAX_FIXUP): Define.
(TC_FORCE_RELOCATION_SUB_SAME): Define.
(DWARF2_USE_FIXED_ADVANCE_PC): Define.
* gas/lns/lns.exp: Add RL78 to list of targets using
DW_LNS_fixed_advance_pc.
bfd * elf32-rl78.c (RL78_OP_REL): New macro.
(rl78_elf_howto_table): Use it for complex relocs.
(get_symbol_value): Handle the cases when the info or status
arguments are NULL.
(get_romstart): Cache the status returned by get_symbol_value.
(get_ramstart): Likewise.
(RL78_STACK_PUSH): Generate an error message if the stack
overflows.
(RL78_STACK_POP): Likewise for underflows.
(rl78_compute_complex_reloc): New function. Contains the basic
processing code for all RL78 complex relocs.
(rl78_special_reloc): New function. Provides special reloc
handling for complex relocs.
(rl78_elf_relocate_section): Use rl78_compute_complex_reloc.
(rl78_offset_for_reloc): Likewise.
binutils* readelf.c (target_specific_reloc_handling): Add code to handle
RL78 complex relocs.
Reinstate test message and replace hardcoded test command with a variable.
gdb/testsuite/ChangeLog:
2015-04-14 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/bp-permanent.exp (test): Reinstate correct test message.
GDB has five places where it pretends to stat for bfd_openr_iovec.
Four of these only set the incoming buffer's st_size, leaving the
other fields unchanged, which is to say very likely populated with
random values from the stack. remote_bfd_iovec_stat was fixed in
0a93529c56714b1da3d7106d3e0300764f8bb81c; this commit fixes the
other four.
gdb/ChangeLog:
* jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
* minidebug.c (lzma_stat): Likewise.
* solib-spu.c (spu_bfd_iovec_stat): Likewise.
* spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
Address of protected data defined in the shared library may be external,
i.e., due to copy relocation. By default, linker backend checks if
relocations against protected data symbols are valid for building shared
library and issues an error if relocation isn't allowed. The new option
override linker backend default. When -z noextern-protected-data is used,
updates on protected data symbols by another module won't be visibile
to the resulting shared library. This option is specific to ELF/i386
and ELF/x86-64.
bfd/
PR ld/pr17709
* elflink.c (_bfd_elf_adjust_dynamic_copy): Check
info->extern_protected_data when warning copy relocs against
protected symbols.
(_bfd_elf_symbol_refs_local_p): Check info->extern_protected_data
when checking protected non-function symbols.
include/
PR ld/pr17709
* bfdlink.h (bfd_link_info): Add extern_protected_data.
ld/
PR ld/pr17709
* ld.texinfo: Document "-z noextern-protected-data".
* ldmain.c (main): Initialize link_info.extern_protected_data
to -1.
* lexsup.c (elf_shlib_list_options): Add
"-z [no]extern-protected-data".
* emulparams/elf32_x86_64.sh: Source extern_protected_data.sh.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_i386_be.sh: Likewise.
* emulparams/elf_i386_chaos.sh: Likewise.
* emulparams/elf_i386_ldso.sh: Likewise.
* emulparams/elf_i386_vxworks.sh: Likewise.
* emulparams/elf_k1om.sh: Likewise.
* emulparams/elf_l1om.sh: Likewise.
* emulparams/elf_x86_64.sh: Source extern_protected_data.sh.
(PARSE_AND_LIST_OPTIONS): Renamed to ...
(PARSE_AND_LIST_OPTIONS_BNDPLT): This.
(PARSE_AND_LIST_ARGS_CASE_Z): Renamed to ...
(PARSE_AND_LIST_ARGS_CASE_Z_BNDPLT): This.
(PARSE_AND_LIST_OPTIONS): Append $PARSE_AND_LIST_OPTIONS_BNDPLT.
(PARSE_AND_LIST_ARGS_CASE_Z): Append
$PARSE_AND_LIST_ARGS_CASE_Z_BNDPLT.
* emulparams/extern_protected_data.sh: New file.
ld/testsuite/
PR ld/pr17709
* ld-i386/i386.exp: Run protected6b.
* ld-i386/protected6b.d: New file.
* ld-x86-64/protected6b.d: Likewise.
* ld-x86-64/x86-64.exp: Run protected6b.
Recognize NT_X86_XSTATE notes in FreeBSD process cores. Recent
FreeBSD versions include a note containing the XSAVE state for each
thread in the process when XSAVE is in use. The note stores a copy of
the current XSAVE mask in a reserved section of the machine-defined
XSAVE state at the same offset as Linux's NT_X86_XSTATE note.
For native processes, use the PT_GETXSTATE_INFO ptrace request to
determine if XSAVE is enabled, and if so the active XSAVE state mask
(that is, the value of %xcr0 for the target process) as well as the
size of XSAVE state area. Use the PT_GETXSTATE and PT_SETXSTATE requests
to fetch and store the XSAVE state, respectively, in the BSD x86
native targets.
In addition, the FreeBSD amd64 and i386 native targets now include
"read_description" target methods to determine the correct x86 target
description for the current XSAVE mask. On FreeBSD amd64 this also
properly returns an i386 target description for 32-bit binaries which
allows the 64-bit GDB to run 32-bit binaries.
Note that the ptrace changes are in the BSD native targets, not the
FreeBSD-specific native targets since that is where the other ptrace
register accesses occur. Of the other BSDs, NetBSD and DragonFly use
XSAVE in the kernel but do not currently export the extended state via
ptrace(2). OpenBSD does not currently support XSAVE.
bfd/ChangeLog:
* elf.c (elfcore_grok_note): Recognize NT_X86_XSTATE on
FreeBSD.
(elfcore_write_xstatereg): Use correct note name on FreeBSD.
gdb/ChangeLog:
* amd64-tdep.c (amd64_target_description): New function.
* amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
* amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
(amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
x86 extended save area.
(amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
* amd64bsd-nat.h: Export amd64bsd_xsave_len.
* amd64fbsd-nat.c (amd64fbsd_read_description): New function.
(_initialize_amd64fbsd_nat): Set "to_read_description" to
"amd64fbsd_read_description".
* amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
(amd64fbsd_supply_xstateregset): New function.
(amd64fbsd_collect_xstateregset): New function.
Add "amd64fbsd_xstateregset".
(amd64fbsd_iterate_over_regset_sections): New function.
(amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
"I386_FBSD_XSAVE_XCR0_OFFSET".
Add "iterate_over_regset_sections" gdbarch method.
Add "core_read_description" gdbarch method.
* i386-tdep.c (i386_target_description): New function.
* i386-tdep.h: Export i386_target_description and tdesc_i386.
* i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
(i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
x86 extended save area.
(i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
* i386bsd-nat.h: Export i386bsd_xsave_len.
* i386fbsd-nat.c (i386fbsd_read_description): New function.
(_initialize_i386fbsd_nat): Set "to_read_description" to
"i386fbsd_read_description".
* i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
(i386fbsd_core_read_description): New function.
(i386fbsd_supply_xstateregset): New function.
(i386fbsd_collect_xstateregset): New function.
Add "i386fbsd_xstateregset".
(i386fbsd_iterate_over_regset_sections): New function.
(i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
"I386_FBSD_XSAVE_XCR0_OFFSET".
Add "iterate_over_regset_sections" gdbarch method.
Add "core_read_description" gdbarch method.
* i386fbsd-tdep.h: New file.
This testcase does not work as expected in QEMU (aarch64 QEMU in my case). It
fails when trying to manually write the breakpoint instruction to a certain
PC address.
(gdb) p /x addr_bp[0] = buffer[0]^M
Cannot access memory at address 0x400834^M
(gdb) PASS: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: setup: p /x addr_bp[0] = buffer[0]
p /x addr_bp[1] = buffer[1]^M
Cannot access memory at address 0x400835^M
(gdb) PASS: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: setup: p /x addr_bp[1] = buffer[1]
p /x addr_bp[2] = buffer[2]^M
Cannot access memory at address 0x400836^M
(gdb) PASS: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: setup: p /x addr_bp[2] = buffer[2]
p /x addr_bp[3] = buffer[3]^M
Cannot access memory at address 0x400837^M
(gdb) PASS: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: setup: p /x addr_bp[3] = buffer[3]
The following patch prevents a number of failures by detecting this and bailing out in case the target has such a restriction. Writing to .text from within the program isn't any better. It just leads to a SIGSEGV.
Before the patch:
=== gdb Summary ===
After the patch:
=== gdb Summary ===
gdb/testsuite/ChangeLog:
2015-04-13 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/bp-permanent.exp (test): Handle the case of being unable
to write to the .text section.
This testcase seems to assume the target is running Linux, so bare metal,
simulators and other debugging stubs running different OS' will have a
hard time executing some of the commands the testcase issues.
Even restricting the testcase to Linux systems (which the patch below does),
there are still problems with, say, QEMU not providing PID information when
"info inferior" is issued. As a consequence, the subsequent tests will either
fail or will not make much sense.
The attached patch checks if PID information is available. If not, it just
bails out and avoids running into a number of failures.
gdb/testsuite/ChangeLog:
2015-04-13 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/coredump-filter.exp: Restrict test to Linux systems only.
Handle the case of targets that do not provide PID information.
I see the error when I run gdb-sigterm.exp with native-gdbserver
on x86_64-linux.
infrun: prepare_to_wait^M
Cannot execute this command while the target is running.^M
Use the "interrupt" command to stop the target^M
and then try again.^M
gdb.base/gdb-sigterm.exp: expect eof #0: got eof
gdb.base/gdb-sigterm.exp: expect eof #0: stepped 12 times
ERROR OCCURED: : spawn id exp8 not open
while executing
"expect {
-i exp8 -timeout 10
-re "$gdb_prompt $" {
exp_continue
}
-i "$server_spawn_id" eof {
wait -i $expect_out(spawn_id)
unse..."
("uplevel" body line 1)
invoked from within
In gdb-sigterm.exp, SIGTERM is sent to GDB and it exits. However,
Dejagnu or tcl doesn't know this.
This patch is to catch the exception, but error messages are still
shown in the console and gdb.log. In order to avoid this, we also
replace gdb_expect with expect.
gdb/testsuite:
2015-04-13 Yao Qi <yao.qi@linaro.org>
* lib/gdbserver-support.exp (gdb_exit): Catch exception
and use expect instead of gdb_expect.
When ELF linker backend searchs the symbol table of an archive element,
it should skip the object which has been claimed by plugin.
PR ld/18250
* elflink.c (elf_link_is_defined_archive_symbol): Return FALSE
if the object has been claimed by plugin.
This commit renames the global array variable "addr" to an unique name
"coredump_var_addr" in the test gdb.base/coredump-filter.exp. This is
needed because global arrays can have name conflicts between tests.
For example, this specific test was conflicting with dmsym.exp,
causing errors like:
ERROR: tcl error sourcing ../../../../../binutils-gdb/gdb/testsuite/gdb.base/dmsym.exp.
ERROR: can't set "addr": variable is array
while executing
"set addr "0x\[0-9a-zA-Z\]+""
(file "../../../../../binutils-gdb/gdb/testsuite/gdb.base/dmsym.exp" line 45)
invoked from within
"source ../../../../../binutils-gdb/gdb/testsuite/gdb.base/dmsym.exp"
("uplevel" body line 1)
invoked from within
"uplevel #0 source ../../../../../binutils-gdb/gdb/testsuite/gdb.base/dmsym.exp"
invoked from within
"catch "uplevel #0 source $test_file_name""
This problem was reported by Yao Qi at:
<https://sourceware.org/ml/gdb-patches/2015-04/msg00373.html>
Message-Id: <1428666671-12926-1-git-send-email-qiyaoltc@gmail.com>
gdb/testsuite/ChangeLog:
2015-04-13 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/coredump-filter.exp: Rename variable "addr" to
"coredump_var_addr" to avoid naming conflict with other testcases.
The old run frontend had a --version option, but the new common
sim-options file does not. Restore support for that so we can
get version info out of `run` when using the new frontend.
