I used a refactoring script to add target_ops arguments to all the
target methods. In order to make this script work a little better,
this patch adds a new "remote_load" function; this eliminates the need
to later change the signature of generic_load.
2014-02-19 Tom Tromey <tromey@redhat.com>
* remote.c (remote_load): New function.
(init_remote_ops): Use it.
This adds a "self" argument to to_supports_btrace. Due to how one
implementation of this method is shared with gdbserver this required a
small change to gdbserver as well.
2014-02-19 Tom Tromey <tromey@redhat.com>
* common/linux-btrace.c (linux_supports_btrace): Add "ops"
argument.
* common/linux-btrace.h (linux_supports_btrace): Update.
* remote.c (remote_supports_btrace): Add "self" argument.
* target-delegates.c: Rebuild.
* target.c (target_supports_btrace): Remove.
* target.h (struct target_ops) <to_supports_btrace>: Add
target_ops argument.
(target_supports_btrace): New define.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <supports_btrace>: Add target_ops
argument.
(target_supports_btrace): Update.
Currently bin2hex may call strlen if the length argument is zero.
This prevents some function unification; and also it seems cleaner to
me not to have a special meaning for a zero length.
2014-02-12 Tom Tromey <tromey@redhat.com>
* common/rsp-low.c (bin2hex): Never take strlen of argument.
* remote.c (extended_remote_run, remote_rcmd)
(remote_download_trace_state_variable, remote_save_trace_data)
(remote_set_trace_notes): Update.
* tracepoint.c (encode_source_string, tfile_write_status)
(tfile_write_uploaded_tsv): Update.
This moves various low-level remote serial protocol bits into
common/rsp-low.[ch].
This is as close to a pure move as possible. There are some
redundancies remaining but those will be dealt with in a subsequent
patch.
Note that the two variants of remote_escape_output disagreed on the
treatment of "*". On the theory that quoting cannot hurt but the
absence possibly can, I chose the gdbserver variant to be the
canonical one.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
* remote.c: Include rsp-low.h.
(hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
(fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
(remote_unescape_input): Move to common/rsp-low.c.
* common/rsp-low.h: New file.
* common/rsp-low.c: New file.
* Makefile.in (SFILES): Add common/rsp-low.c.
(HFILES_NO_SRCDIR): Add common/rsp-low.h.
(COMMON_OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* server.c: Include rsp-low.h.
* remote-utils.h (convert_ascii_to_int, convert_int_to_ascii)
(unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't
declare.
* remote-utils.c: Include rsp-low.h.
(fromhex, hexchars, ishex, unhexify, tohex, hexify)
(remote_escape_output, remote_unescape_input, unpack_varlen_hex)
(convert_int_to_ascii, convert_ascii_to_int): Move to
common/rsp-low.c.
* regcache.c: Include rsp-low.h.
* ax.c: Include rsp-low.h.
* Makefile.in (SFILES): Add common/rsp-low.c.
(OBS): Add rsp-low.o.
(rsp-low.o): New target.
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
Hi,
The following code snippet looks wrong to me
char *buf = rs->buf;
getpkt (&rs->buf, &rs->buf_size, 0);
packet_ok (buf, );
if rs->buf is reallocated in getpkt, buf points to an out of dated
memory. This patch removes local 'buf' and uses rs->buf.
gdb:
2014-02-05 Yao Qi <yao@codesourcery.com>
* remote.c (remote_pass_signals): Remove local 'buf' and use
rs->buf.
(remote_program_signals): Likewise.
The Eclipse "C/C++ GDB Hardware Debugging" plugin runs only the
"symbol-file" command. In this case, remote_check_symbols is not
called and no qSymbol:: packet is sent to the server (OpenOCD in my
case).
gdb/
2014-02-04 Christian Eggers <ceggers@gmx.de> (tiny change)
* remote.c (remote_start_remote): Call remote_check_symbols even
if only symbol-file (not file) has been given.
Functions remote_read_bytes and get_core_siginfo are the callees of
target to_xfer_partial interface, so argument 'len' should be changed
to type ULONGEST.
gdb:
2014-01-24 Yao Qi <yao@codesourcery.com>
* remote.c (remote_read_bytes): Change type of len to ULONGEST.
* corelow.c (get_core_siginfo): Likewise.
Hi,
This patch changes the type of 'len' from ssize_t to ULONGEST.
At the beginning Siddhesh Poyarekar proposed this patch
[PATCH] Memory reads and writes should have size_t length
https://sourceware.org/ml/gdb-patches/2012-05/msg01073.html
to change type of 'len' to size_t. However, after Jan's review, we
decide to change it to ssize_t, because callers of these functions
may pass signed type to them.
AFAICS, the target layer is a boundary. In one side, we pass size_t
or ssize_t to target related APIs, and in the other side, the
implementation side, we used LONGEST (ULONGEST in latest code) because
of to_xfer_partial.
Since remote_write_bytes_aux and remote_write_bytes belong to the
implementation of remote target, we should use ULONGEST for len, IMO.
Regression tested on x86_64-linux. Is it OK?
gdb:
2014-01-24 Yao Qi <yao@codesourcery.com>
* remote.c (remote_write_bytes_aux): Change type of 'len' to
ULONGEST. Don't check 'len' is negative.
(remote_write_bytes): Change type of 'len' to ULONGEST.
While doing something else, I found that those 2 places were incorrectly
declaring a "struct gdb_exception" without using the "volatile" keyword.
This commit fixes that.
2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
* breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
gdb_exception" declaration.
* remote.c (getpkt_or_notif_sane): Likewise.
I noticed that extended_remote_create_inferior_1 is called from a
single spot. This patch unifies the callee and caller. It's just a
simple cleanup that made the coming refactoring simpler.
2014-01-16 Tom Tromey <tromey@redhat.com>
* remote.c (extended_remote_create_inferior): Rename from
extended_remote_create_inferior_1. Add "ops" argument. Remove
old implementation.
Read branch trace data incrementally and extend the current trace rather than
discarding it and reading the entire trace buffer each time.
If the branch trace buffer overflowed, we can't extend the current trace so we
discard it and start anew by reading the entire branch trace buffer.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
Support delta reads.
(linux_disable_btrace): Change return type.
* common/linux-btrace.h (linux_read_btrace): Change parameters
and return type to allow error reporting. Update users.
(linux_disable_btrace): Change return type. Update users.
* common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
New.
(btrace_error): New.
(btrace_block) <begin>: Comment on BEGIN == 0.
* btrace.c (btrace_compute_ftrace): Start from the end of
the current trace.
(btrace_stitch_trace, btrace_clear_history): New.
(btrace_fetch): Read delta trace, return if replaying.
(btrace_clear): Move clear history code to btrace_clear_history.
(parse_xml_btrace): Throw an error if parsing failed.
* target.h (struct target_ops) <to_read_btrace>: Change parameters
and return type to allow error reporting.
(target_read_btrace): Change parameters and return type to allow
error reporting.
* target.c (target_read_btrace): Update.
* remote.c (remote_read_btrace): Support delta reads. Pass
errors on.
* NEWS: Announce it.
gdbserver/
* target.h (target_ops) <read_btrace>: Change parameters and
return type to allow error reporting.
* server.c (handle_qxfer_btrace): Support delta reads. Pass
trace reading errors on.
* linux-low.c (linux_low_read_btrace): Pass trace reading
errors on.
(linux_low_disable_btrace): New.
Although we can tell upfront whether a remote target supports target
side commands, we can only tell whether the target supports that in
combination with a given breakpoint kind (software, hardware,
watchpoints, etc.) when we go and try to insert such a breakpoint kind
the first time. It's not desirable to make remote_insert_breakpoint
simply return -1 in this case, because if the breakpoint was set in a
shared library, insert_bp_location will assume that the breakpoint
insertion failed because the library wasn't mapped in.
insert_bp_location already handles errors/exceptions thrown from the
target_insert_xxx methods, exactly so the backend can tell the user
the detailed reason the insertion of hw breakpoints failed. But, in
the case of software breakpoints, it discards the detailed error
message.
So the patch makes insert_bp_location use the error's message for SW
breakpoints too, and, introduces a NOT_SUPPORTED_ERROR error code so
that insert_bp_location doesn't confuse the error for failure due to a
shared library disappearing.
The result is:
(gdb) c
Warning:
Cannot insert breakpoint 2: Target doesn't support breakpoints that have target side commands.
2014-01-09 Pedro Alves <palves@redhat.com>
Hui Zhu <hui@codesourcery.com>
PR gdb/16101
* breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
bp_err_string. Don't mark the location shlib_disabled if the
error thrown wasn't a generic or memory error. Catch errors
thrown while inserting breakpoints in overlayed code. Output
error message of software breakpoints.
* remote.c (remote_insert_breakpoint): If this breakpoint has
target-side commands but this stub doesn't support Z0 packets,
throw NOT_SUPPORTED_ERROR error.
* exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
* target.h (target_insert_breakpoint): Extend comment.
(target_insert_hw_breakpoint): Add comment.
Currently, when GDB connects in all-stop mode, GDBserver always
responds to the status packet with a GDB_SIGNAL_TRAP, even if the
program is actually stopped for some other signal.
(gdb) tar rem ...
...
(gdb) c
Program received signal SIGUSR1, User defined signal 1.
(gdb) disconnect
(gdb) tar rem ...
(gdb) c
(Or a GDB crash instead of an explicit disconnect.)
This results in the program losing that signal on that last continue,
because gdb will tell the target to resume with no signal (to suppress
the GDB_SIGNAL_TRAP, due to 'handle SISGTRAP nopass'), and that will
actually suppress the real signal the program had stopped for
(SIGUSR1). To fix that, I think we should make GDBserver report the
real signal the thread had stopped for in response to the status
packet:
@item ?
@cindex @samp{?} packet
Indicate the reason the target halted. The reply is the same as for
step and continue.
But, that raises the question -- which thread are we reporting the
status for? Due to how the RSP in all-stop works, we can only report
one status. The status packet's response is a stop reply packet, so
it includes the thread identifier, so it's not a problem packet-wise.
However, GDBserver is currently always reporting the status for first
thread in the thread list, even though that may well not be the thread
that got the signal that caused the program to stop. So the next
logical step would be to report the status for the
last_ptid/last_status thread (the last event reported to gdb), if it's
still around; and if not, fallback to some other thread.
There's an issue on the GDB side with that, though...
GDB currently always adds the thread reported in response to the
status query as the first thread in its list. That means that if we
start with e.g.,
(gdb) info threads
3 Thread 1003 ...
* 2 Thread 1002 ...
1 Thread 1001 ...
And reconnect:
(gdb) disconnect
(gdb) tar rem ...
We end up with:
(gdb) info threads
3 Thread 1003 ...
2 Thread 1001 ...
* 1 Thread 1002 ...
Not a real big issue, but it's reasonably fixable, by having GDB
fetch/sync the thread list before fetching the status/'?', and then
using the status to select the right thread as current on the GDB
side. Holes in the thread numbers are squashed before/after
reconnection (e.g., 2,3,5 becomes 1,2,3), but the order is preserved,
which I think is both good, and good enough.
However (yes, there's more...), the previous GDB that was connected
might have had gdbserver running in non-stop mode, or could have left
gdbserver doing disconnected tracing (which also forces non-stop), and
if the new gdb/connection is in all-stop mode, we can end up with more
than one thread with a signal to report back to gdb. As we can only
report one thread/status (in the all-stop RSP variant; the non-stop
variant doesn't have this issue), we get to do what we do at every
other place we have this situation -- leave events we can't report
right now as pending, so that the next resume picks them up.
Note all this ammounts to a QoI change, within the existing framework.
There's really no RSP change here.
The only user visible change (other than that the signal is program is
stopped at isn't lost / is passed to the program), is in "info
program", that now can show the signal the program stopped for. Of
course, the next resume will respect the pass/nopass setting for the
signal in question. It'd be reasonable to have the initial connection
tell the user the program was stopped with a signal, similar to when
we load a core to debug, but I'm leaving that out for a future change.
I think we'll need to either change how handle_inferior_event & co
handle stop_soon, or maybe bypass them completely (like
fork-child.c:startup_inferior) for that.
Tested on x86_64 Fedora 17.
gdb/gdbserver/
2014-01-08 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_info) <status_pending_p>: New field.
* server.c (visit_actioned_threads, handle_pending_status): New
function.
(handle_v_cont): Factor out parts to ...
(resume): ... this new function. If in all-stop, and a thread
being resumed has a pending status, report it without actually
resuming.
(myresume): Adjust to use the new 'resume' function.
(clear_pending_status_callback, set_pending_status_callback)
(find_status_pending_thread_callback): New functions.
(handle_status): Handle the case of multiple threads having
interesting statuses to report. Report threads' real last signal
instead of always reporting GDB_SIGNAL_TRAP. Look for a thread
with an interesting thread to report the status for, instead of
always reporting the status of the first thread.
gdb/
2014-01-08 Pedro Alves <palves@redhat.com>
* remote.c (remote_add_thread): Add threads silently if starting
up.
(remote_notice_new_inferior): If in all-stop, and starting up,
don't call notice_new_inferior.
(get_current_thread): New function, factored out from ...
(add_current_inferior_and_thread): ... this. Adjust.
(remote_start_remote) <all-stop>: Fetch the thread list. If we
found any thread, then select the remote's current thread as GDB's
current thread too.
gdb/testsuite/
2014-01-08 Pedro Alves <palves@redhat.com>
* gdb.threads/reconnect-signal.c: New file.
* gdb.threads/reconnect-signal.exp: New file.
Remote servers may cut the connection abruptly since they are not
required to reply to a 'k' (Kill) packet sent from GDB.
This patch addresses any issues arising from such scenario, which
leads to a GDB internal error due to an attempt to pop the target more
than once. With the patch, this failure is handled gracefully.
Here's the GDB backtrace Maciej got running the testsuite against
QEMU. Full paths edited out for brevity.
#0 0x55573430 in __kernel_vsyscall ()
#1 0x557a2951 in raise () from /lib32/libc.so.6
#2 0x557a5d82 in abort () from /lib32/libc.so.6
#3 0x0826e2e4 in dump_core ()
at .../gdb/utils.c:635
#4 0x0826e5b6 in internal_vproblem (problem=0x85200c0,
file=0x8416be8 ".../gdb/target.c", line=2861,
fmt=0x84174ac "could not find a target to follow mourn inferior",
ap=0xffa4796c "\f")
at .../gdb/utils.c:804
#5 0x0826e5fb in internal_verror (
file=0x8416be8 ".../gdb/target.c", line=2861,
fmt=0x84174ac "could not find a target to follow mourn inferior",
ap=0xffa4796c "\f")
at .../gdb/utils.c:820
#6 0x0826e633 in internal_error (
file=0x8416be8 ".../gdb/target.c", line=2861,
string=0x84174ac "could not find a target to follow mourn inferior")
at .../gdb/utils.c:830
#7 0x081b4ad0 in target_mourn_inferior ()
at .../gdb/target.c:2861
#8 0x08082283 in remote_kill (ops=0x85245e0)
at .../gdb/remote.c:7840
#9 0x081b06d1 in target_kill ()
at .../gdb/target.c:486
#10 0x081b42f6 in dispose_inferior (inf=0xa501c60, args=0x0)
at .../gdb/target.c:2570
#11 0x08290cfc in iterate_over_inferiors (
callback=0x81b42af <dispose_inferior>, data=0x0)
at .../gdb/inferior.c:396
#12 0x081b435a in target_preopen (from_tty=1)
at .../gdb/target.c:2591
#13 0x0807c2c6 in remote_open_1 (name=0xa5538b6 "localhost:1237", from_tty=1,
target=0x85245e0, extended_p=0)
at .../gdb/remote.c:4292
#14 0x0807b7a8 in remote_open (name=0xa5538b6 "localhost:1237", from_tty=1)
at .../gdb/remote.c:3655
#15 0x080a23d4 in do_cfunc (c=0xa464f30, args=0xa5538b6 "localhost:1237",
from_tty=1)
at .../gdb/cli/cli-decode.c:107
#16 0x080a4c3b in cmd_func (cmd=0xa464f30, args=0xa5538b6 "localhost:1237",
from_tty=1)
at .../gdb/cli/cli-decode.c:1882
#17 0x0826bebf in execute_command (p=0xa5538c3 "7", from_tty=1)
at .../gdb/top.c:467
#18 0x08193f2d in command_handler (command=0xa5538a8 "")
at .../gdb/event-top.c:435
#19 0x08194463 in command_line_handler (
rl=0xa778198 "target remote localhost:1237")
at .../gdb/event-top.c:633
#20 0x082ba92b in rl_callback_read_char ()
at .../readline/callback.c:220
#21 0x08193adf in rl_callback_read_char_wrapper (client_data=0x0)
at .../gdb/event-top.c:164
#22 0x08193e57 in stdin_event_handler (error=0, client_data=0x0)
at .../gdb/event-top.c:375
#23 0x08192f29 in handle_file_event (data=...)
at .../gdb/event-loop.c:768
#24 0x0819266a in process_event ()
at .../gdb/event-loop.c:342
#25 0x08192708 in gdb_do_one_event ()
at .../gdb/event-loop.c:394
#26 0x08192781 in start_event_loop ()
at .../gdb/event-loop.c:431
#27 0x08193b08 in cli_command_loop (data=0x0)
at .../gdb/event-top.c:179
#28 0x0818bc26 in current_interp_command_loop ()
at .../gdb/interps.c:327
#29 0x0818c4e5 in captured_command_loop (data=0x0)
at .../gdb/main.c:267
#30 0x0818a37f in catch_errors (func=0x818c4d0 <captured_command_loop>,
func_args=0x0, errstring=0x8402108 "", mask=RETURN_MASK_ALL)
at .../gdb/exceptions.c:524
#31 0x0818d736 in captured_main (data=0xffa47f10)
at .../gdb/main.c:1067
#32 0x0818a37f in catch_errors (func=0x818c723 <captured_main>,
func_args=0xffa47f10, errstring=0x8402108 "", mask=RETURN_MASK_ALL)
at .../gdb/exceptions.c:524
#33 0x0818d76c in gdb_main (args=0xffa47f10)
at .../gdb/main.c:1076
#34 0x0804dd1b in main (argc=5, argv=0xffa47fd4)
at .../gdb/gdb.c:34
The corresponding gdb.log excerpt:
(gdb) PASS: gdb.base/bitfields.exp: bitfield uniqueness (u9)
cont
Continuing.
Breakpoint 1, break1 () at .../gdb/testsuite/gdb.base/bitfields.c:44
44 }
(gdb) PASS: gdb.base/bitfields.exp: continuing to break1 #9
print flags
$10 = {uc = 0 '\000', s1 = 0, u1 = 0, s2 = 0, u2 = 0, s3 = 0, u3 = 0, s9 = 0, u9 = 0, sc = 1 '\001'}
(gdb) PASS: gdb.base/bitfields.exp: bitfield uniqueness (sc)
delete breakpoints
Delete all breakpoints? (y or n) y
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) delete breakpoints
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) break break2
Breakpoint 2 at 0x85f8: file .../gdb/testsuite/gdb.base/bitfields.c, line 48.
(gdb) entering gdb_reload
target remote localhost:1235
A program is being debugged already. Kill it? (y or n) y
Remote connection closed
.../gdb/target.c:2861: internal-error: could not find a target to follow mourn inferior
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) ^Ccontinue
Please answer y or n.
.../gdb/target.c:2861: internal-error: could not find a target to follow mourn inferior
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) Resyncing due to internal error.
n
.../gdb/target.c:2861: internal-error: could not find a target to follow mourn inferior
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Create a core file of GDB? (y or n) y
Command aborted.
(gdb) print/x flags
$11 = {uc = 0x0, s1 = 0x0, u1 = 0x0, s2 = 0x0, u2 = 0x0, s3 = 0x0, u3 = 0x0, s9 = 0x0, u9 = 0x0, sc = 0x0}
(gdb) FAIL: gdb.base/bitfields.exp: bitfield containment #1
cont
The program is not being run.
(gdb) FAIL: gdb.base/bitfields.exp: continuing to break2 (the program is no longer running)
print/x flags
$12 = {uc = 0x0, s1 = 0x0, u1 = 0x0, s2 = 0x0, u2 = 0x0, s3 = 0x0, u3 = 0x0, s9 = 0x0, u9 = 0x0, sc = 0x0}
(gdb) FAIL: gdb.base/bitfields.exp: bitfield containment #2
delete breakpoints
Delete all breakpoints? (y or n) y
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) delete breakpoints
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) break break3
Breakpoint 3 at 0x8604: file .../gdb/testsuite/gdb.base/bitfields.c, line 52.
(gdb) entering gdb_reload
target remote localhost:1236
Remote debugging using localhost:1236
Reading symbols from .../lib/ld-linux.so.3...done.
Loaded symbols for .../lib/ld-linux.so.3
0x41001b80 in _start () from .../lib/ld-linux.so.3
(gdb) continue
Continuing.
Breakpoint 3, break3 () at .../gdb/testsuite/gdb.base/bitfields.c:52
52 }
(gdb) print flags
$13 = {uc = 0 '\000', s1 = 0, u1 = 1, s2 = 0, u2 = 3, s3 = 0, u3 = 7, s9 = 0, u9 = 511, sc = 0 '\000'}
(gdb) PASS: gdb.base/bitfields.exp: unsigned bitfield ranges
gdb/
2013-12-02 Pedro Alves <pedro@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
* remote.c (putpkt_for_catch_errors): Remove function.
(remote_kill): Handle TARGET_CLOSE_ERROR from the kill packet
gracefully.
The memory management of bp_location->target_info.conditions|tcommands
is currently a little fragile. If the target reports support for
target conditions or commands, and then target side breakpoint support
is disabled, or some error is thrown before remote_add_target_side_XXX
is called, we'll leak these lists. This patch makes us free these
lists when the locations are deleted, and also, just before recreating
the commands|conditions lists.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-11-29 Pedro Alves <palves@redhat.com>
* breakpoint.c (build_target_condition_list): Release previous
conditions.
(build_target_command_list): Release previous commands.
(bp_location_dtor): Release target conditions and commands.
* remote.c (remote_add_target_side_condition): Don't release
conditions.
(remote_add_target_side_commands): Don't release commands.
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
When I do 'si', I find many 'qXfer:traceframe-info:read' packets are sent,
which is not necessary. It slows down the single step.
(gdb) si
Sending packet: $qTStatus#49...Packet received: T0;tnotrun:0;tframes:0;tcreated:0;tfree:500000;tsize:500000;circular:0;disconn:0;starttime:0;stoptime:0;username:;notes::
Sending packet: $Z0,80483c7,1#b4...Packet received: OK
Sending packet: $Z0,4ce5b6b0,1#6e...Packet received: OK
Sending packet: $QPassSignals:e;10;14;17;1a;1b;1c;21;24;25;2c;4c;#5f...Packet received: OK
Sending packet: $vCont;s:p1b15.1b15;c#20...Packet received: T0505:44efffbf;04:44efffbf;08:d1830408;thread:p1b15.1b15;core:3;
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $mbfffef40,40#c0...Packet received: d183040878efffbf2e840408030000000000a040030000000500000070efffbf07000000010000004984040807000000030000000500000000000000b396e84c
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $z0,80483c7,1#d4...Packet received: OK
Sending packet: $z0,4ce5b6b0,1#8e...Packet received: OK
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
This problem was introduced by this patch
(https://sourceware.org/ml/gdb-patches/2013-04/msg00000.html), in
which get_traceframe_number is not checked before calling
traceframe_available_memory. This patch moves the check to
remote_traceframe_info, say, if GDB doesn't have traceframe selected, GDB
doesn't need to send qXfer:traceframe-info:read packets.
With this patch applied, there is no qXfer:traceframe-info:read sent
out and single step is speed up a little bit.
Here is the experiment I did:
Num of single step Original Patched
single-step cpu_time 10000 8.08 7.57
single-step cpu_time 20000 16.23 14.23
single-step cpu_time 30000 24.19 21.59
single-step cpu_time 40000 32.49 28.0
single-step wall_time 10000 14.1974210739 13.2641420364
single-step wall_time 20000 28.5278921127 25.0541369915
single-step wall_time 30000 42.5864038467 38.0038759708
single-step wall_time 40000 57.2107698917 49.2350611687
single-step vmsize 10000 16128 16388
single-step vmsize 20000 16128 16388
single-step vmsize 30000 16260 16520
single-step vmsize 40000 16444 16704
The patch is tested on x86_64-linux.
gdb:
2013-10-24 Yao Qi <yao@codesourcery.com>
* remote.c (remote_traceframe_info): Return early if
traceframe is not selected.
I realized that remote.c is not validating input here. Currently, if
a remote stub sends in an invalid signal number (or put another way,
if a future stub sends a new signal an old GDB doesn't know about),
GDB will do out of bounds accesses in the
signal_pass/signal_stop/signal_program arrays. It'll probably be a
long while before we add another signal number (and buggy stubs should
just be fixed), but can't hurt to be defensive.
Tested on x86_64 Fedora 17, native gdbserver.
gdb/
2013-10-22 Pedro Alves <palves@redhat.com>
* remote.c (remote_parse_stop_reply) <'T'/'S'/'X' replies>: Map
invalid signal numbers to GDB_SIGNAL_UNKNOWN.
This patch moves pending_event to remote_notif_state. All pending
events are destroyed in remote_notif_state_xfree. However,
discard_pending_stop_replies release pending event too, so the pending
event of stop notification is released twice, we need some refactor
here. We add a new function discard_pending_stop_replies_in_queue
which only discard events in stop_reply_queue, and let
remote_notif_state_xfree release pending event for all notif_client.
After this change, discard_pending_stop_replies is only attached to
ifnerior_exit observer, so the INF can't be NULL any more. The
NULL checking is removed too.
gdb:
2013-10-04 Yao Qi <yao@codesourcery.com>
* remote-notif.h (REMOTE_NOTIF_ID): New enum.
(struct notif_client) <pending_event>: Moved
to struct remote_notif_state.
<id>: New field.
(struct remote_notif_state) <pending_event>: New field.
(notif_event_xfree): Declare.
* remote-notif.c (handle_notification): Adjust.
(notif_event_xfree): New function.
(do_notif_event_xfree): Call notif_event_xfree.
(remote_notif_state_xfree): Call notif_event_xfree to free
each element in field pending_event.
* remote.c (discard_pending_stop_replies): Remove declaration.
(discard_pending_stop_replies_in_queue): Declare.
(remote_close): Call discard_pending_stop_replies_in_queue
instead of discard_pending_stop_replies.
(remote_start_remote): Adjust.
(stop_reply_xfree): Call notif_event_xfree.
(notif_client_stop): Adjust initialization.
(remote_notif_remove_all): Rename it to ...
(remove_stop_reply_for_inferior): ... this. Update comments.
Don't check INF is NULL.
(discard_pending_stop_replies): Return early if notif_state is
NULL. Adjust. Don't check INF is NULL.
(remote_notif_get_pending_events): Adjust.
(discard_pending_stop_replies_in_queue): New function.
(remote_wait_ns): Likewise.
I tried debugging a remote Windows program on Linux host, and pointed the
sysroot to "/some/path/" rather than "remote:", and I found GDB couldn't
find the dlls in the sysroot. If the dll name is
"C:/Windows/system32/ntdll.dll", I end up with the sysroot+in_pathname
concatenated this way:
(top-gdb) p temp_pathname
$1 = 0x228b690 "/some/pathC:/Windows/system32/ntdll.dll"
^^
That is, a directory separator is missing. This is a regression.
The problem is that solib_find decides that since the target path has
a drive spec, a separator is not necessary, which is clearly wrong in
this case. That check was added in
<https://sourceware.org/ml/gdb-patches/2013-06/msg00028.html>, to
handle the case of sysroot being "remote:". This patch fixes that
original issue in a different way. Instead of checking whether the
path has a drive spec, check whether the sysroot is "remote:". The
patch adds a table that helps visualize the cases that need a
separator. I also confirmed the original issue is still handled as
expected. That is, that "set sysroot remote:" still does the right
thing.
remote_filename_p returns true if the filename is prefixed with
"remote:". In this case, we need to check whether the filename is
exactly "remote:". I thought of different ways or either changing
remote_filename_p or adding another convenience function to remote.c
to avoid exposing the "remote:" prefix out of remote.c. But all
attempts turned out adding lot of over needless complication. So the
patch just exposes the prefix behind a new macro, which allows using a
straighforward strcmp.
gdb/
2013-09-27 Pedro Alves <palves@redhat.com>
* remote.h (REMOTE_SYSROOT_PREFIX): New define.
(remote_filename_p): Add comment.
* remote.c (remote_filename_p): Adjust to use
REMOTE_SYSROOT_PREFIX.
* solib.c (solib_find): When deciding whether we need to add a
directory separator, check whether the sysroot is "remote:"
instead of checking whether the patch has a drive spec. Add
comments.
I noticed these fields aren't really necessary -- if the T stop reply
indicated any we have any special event, the fallthrough doesn't
really do anything.
Tested on x86_64 Fedora 17 w/ local gdbserver, and also confirmed
"catch load" against a Windows gdbserver running under Wine, which
exercises TARGET_WAITKIND_LOADED, still works as expected.
gdb/
2013-09-27 Pedro Alves <palves@redhat.com>
* remote.c (struct stop_reply) <solibs_changed, replay_event>:
Delete fields.
(remote_parse_stop_reply): Adjust, setting event->ws.kind
directly.
There's no need for deprecated_xfer_memory nowadays. Memory access
goes through target_xfer_partial/TARGET_OBJECT_MEMORY, etc. In fact,
the remote target already handles that, and is deferring to the same
helpers the deprecated_xfer_memory hook is. Basically, only a few
adjustments to make these helper routines's interfaces closer to
target_xfer_partial's were necessary.
Tested on x86_64 Fedora 17 w/ gdbserver.
gdb/
2013-08-23 Pedro Alves <palves@redhat.com>
* remote.c (remote_write_bytes_aux, remote_write_bytes)
(remote_read_bytes): Change return type to LONGEST, and adjust to
return a target_xfer_error on error.
(remote_xfer_memory): Delete.
(remote_flash_write): Change type of 'ret' local to LONGEST.
(remote_xfer_partial, remote_xfer_partial): Adjust.
(init_remote_ops): Don't install a deprecated_xfer_memory hook.
This moves a few static variables from thread-info functions into
remote_state. Pedro said on irc that these functions implement the
ancient thread-discovery method and that he wouldn't be surprised if
they had rotted; nevertheless it seems safer to me to make them
explicitly per-remote.
This necessitated moving a couple of macros and a typedef earlier in
the file.
* remote.c (struct remote_state) <echo_nextthread, nextthread,
resultthreadlist>: New fields.
(OPAQUETHREADBYTES, threadref, MAXTHREADLISTRESULTS): Move earlier.
(remote_get_threadlist, remote_threadlist_iterator): Use
new fields. Remove static variables.
This moves the globals remote_stopped_by_watchpoint_p and
remote_watch_data_address into remote_state.
* remote.c (struct remote_state) <remote_stopped_by_watchpoint_p,
remote_watch_data_address>: New fields.
(remote_stopped_by_watchpoint_p, remote_watch_data_address): Remove.
(process_stop_reply, remote_wait_as)
(remote_check_watch_resources, remote_stopped_data_address): Update.
The global sizeof_pkt is only used in remote_trace_find, like so:
reply = remote_get_noisy_reply (&(rs->buf), &sizeof_pkt);
I think in this situation it is more correct to use the recorded size
of the buffer. Otherwise it seems that some skew could result.
* remote.c (sizeof_pkt): Remove.
(remote_trace_find): Use rs->buf_size, not sizeof_pkt.
This moves the use_threadextra_query and use_threadinfo_query globals
into remote_state.
* remote.c (struct remote_state) <use_threadinfo_query,
use_threadextra_query>: New fields.
(remote_threads_info, remote_threads_extra_info)
(remote_open_1): Update.
This moves a few static variables out of remote_read_qxfer and into
remote_state.
* remote.c (struct remote_state) <finished_object,
finished_annex, finished_offset>: New fields.
(remote_read_qxfer): Use remote_state fields; remove static
variables.
This moves the global last_sent_step into remote_state.
* remote.c (struct remote_state) <last_sent_step>:
New field.
(last_sent_step): Remove.
(remote_resume, remote_wait_as): Update.
This moves the global last_sent_signal into remote_state.
* remote.c (struct remote_state) <last_sent_signal>:
New field.
(last_sent_signal): Remove.
(new_remote_state, remote_resume, remote_wait_as): Update.
This moves the global last_program_signals_packet into remote_state.
* remote.c (struct remote_state) <last_program_signals_packet>:
New field.
(last_program_signals_packet): Remove.
(remote_program_signals, remote_open_1): Update.
This moves the global last_pass_packet into remote_state.
* remote.c (struct remote_state) <last_pass_packet>:
New field.
(last_pass_packet): Remove.
(remote_pass_signals, remote_open_1): Update.
This moves the global remote_traceframe_number into remote_state.
* remote.c (struct remote_state) <remote_traceframe_number>:
New field.
(remote_traceframe_number): Remove.
(new_remote_state, remote_open_1, set_remote_traceframe)
(remote_trace_find): Update.
Add new_remote_state and change remote_state to be a pointer. This is
a preparatory patch for a later series. It could perhaps be omitted,
but new_remote_state also does some initialization that was previously
done for the globals.
* remote.c (remote_state): Now a pointer.
(get_remote_state_raw): Update.
(new_remote_state): New function.
(_initialize_remote): Use new_remote_state.
gdb has a copy of some CRC code that also appears in libiberty.
This patch just removes the local copy.
You may notice that "crc32" returns unsigned long but "xcrc32" returns
unsigned int. However, this does not matter, because crc32 actually
does all its operations in unsigned int type, and only the return
result is widened. So, the difference does not matter.
* remote.c (crc32_table, crc32): Remove.
(remote_verify_memory): Use xcrc32.
Code cleanup.
* remote.c (cleanup_sigint_signal_handler): Rename the declaration
to ...
(async_cleanup_sigint_signal_handler): ... this.
(initialize_sigint_signal_handler): Remove declaration.
(handle_remote_sigint): Rename the declaration to ...
(async_handle_remote_sigint): ... this.
(handle_remote_sigint_twice): Rename the declaration to ...
(async_handle_remote_sigint_twice): ... this.
(async_remote_interrupt, async_remote_interrupt_twice)
(remote_interrupt): Remove the declarations.
(remote_interrupt_twice): Rename the declaration ...
(sync_remote_interrupt_twice): ... this.
(sigint_remote_twice_token): Rename the variable to ...
(async_sigint_remote_twice_token): ... this.
(sigint_remote_token): Rename the variable to ...
(async_sigint_remote_token): ... this.
(initialize_sigint_signal_handler): Rename the function to ...
(async_initialize_sigint_signal_handler): ... this. Update the name
inside.
(handle_remote_sigint): Rename the function to ...
(async_handle_remote_sigint): ... this. Update the names inside.
(handle_remote_sigint_twice): Rename the function to ...
(async_handle_remote_sigint_twice): ... this. Update the names inside.
(cleanup_sigint_signal_handler): Rename the function to ...
(async_cleanup_sigint_signal_handler): ... this.
(remote_interrupt): Rename the function to ...
(sync_remote_interrupt): this. Update the names inside.
(remote_interrupt_twice): Rename the function to ...
(sync_remote_interrupt_twice): this. Update the names inside.
(remote_terminal_inferior, remote_terminal_ours, remote_wait_as)
(_initialize_remote): Update the names inside.
2013-06-26 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* gdb.texinfo (GDB/MI Tracepoint Commands): Document
-trace-frame-collected.
gdb:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* mi/mi-cmds.c (mi_cmds): Register -trace-frame-collected.
* mi/mi-cmds.h (mi_cmd_trace_frame_collected): Declare.
* mi/mi-main.c (print_variable_or_computed): New function.
(mi_cmd_trace_frame_collected): New function.
* tracepoint.c (find_trace_state_variable_by_number): New.
(struct traceframe_info): Move to tracepoint.h
(struct collection_list): Likewise.
(do_collect_symbol): Include locals and arguments in the wholly
collected variables list.
(clear_collection_list): Clear wholly collected variables list
and computed variables list.
(append_exp): New function.
(encode_actions_1): Include variables in the wholly
collected variables list. Include memory ranges and
full-fledged expressions in the computed expressions list.
(encode_actions): Move some code to ...
Return the cleanup chain.
(encode_actions_rsp): ... here. New function.
(get_traceframe_location, get_traceframe_info): Remove static.
* tracepoint.h (struct memrange): Moved from tracepoint.c.
(struct collection_list): Moved from tracepoint.c. Add two
new fields 'wholly_collected' and 'computed'.
(find_trace_state_variable_by_number): Declare.
(encode_actions): Adjust declaration.
(encode_actions_rsp): Declare.
(get_traceframe_info, get_traceframe_location): Declare.
* NEWS: Mention new MI command -trace-frame-collected.
In extended-remote, when GDB connects the target, but target is not
running, the TSVs are not uploaded. When GDB attaches to a process,
the TSVs are not uploaded either. However, GDBserver has some
builtin or predefined TSV to upload, such as $trace_timestamp. This
bug causes $trace_timestamp is never uploaded.
gdb/
2013-06-25 Yao Qi <yao@codesourcery.com>
* remote.c (remote_start_remote): Move code to upload tsv
earlier.
gdb/testsuite/
2013-06-25 Yao Qi <yao@codesourcery.com>
* boards/native-extended-gdbserver.exp: Set board_info
'gdb,predefined_tsv'.
* boards/native-gdbserver.exp: Likewise.
* boards/native-stdio-gdbserver.exp: Likewise.
* gdb.server/ext-attach.exp: Load trace-support.exp. Check
uploaded TSVs if target supports tracing.
* gdb.trace/tsv.exp: Check uploaded TSVs if target supports
tracing and target has predefined tsv.
gdb/doc/
2013-06-25 Yao Qi <yao@codesourcery.com>
* gdbint.texinfo (Testsuite): Document 'gdb,predefined_tsv'.
was received. This patch fixes it.
2013-06-04 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* remote.c (remote_wait_as): Restore signal handler before returning
when GDB gets a notification.
* target.h (target_ops): New field
"to_augmented_libraries_svr4_read".
(target_augmented_libraries_svr4_read): New macro.
* target.c (update_current_target): Handle
to_augmented_libraries_svr4_read.
* remote.c (remote_state): New field
"augmented_libraries_svr4_read".
(remote_augmented_libraries_svr4_read_feature): New function.
(remote_protocol_features): Add entry for
"augmented-libraries-svr4-read".
(remote_augmented_libraries_svr4_read): New function.
(init_remote_ops): Initialize
remote_ops.to_augmented_libraries_svr4_read.
I noticed that gdb.multi/multi-arch.exp wasn't passing with
extended-remote GDBserver with my pending multi-process+multi-arch
series anymore on current mainline, while it used to pass before:
(gdb) run
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.multi/ma-hangout
Process /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.multi/ma-hangout created; pid = 32067
Warning:
Cannot insert breakpoint 2.
Error accessing memory address 0x4005c2: Unknown error -1.
Cannot insert breakpoint -1.
Temporarily disabling shared library breakpoints:
breakpoint #-1
(gdb) FAIL: gdb.multi/multi-arch.exp: starting inferior 2
Investigating manually, I found an easy way to reproduce. You just
need breakpoints on distinct inferiors, and a way to have GDB install
them in one go:
(gdb) set breakpoint always-inserted on
(gdb) info breakpoints
Num Type Disp Enb Address What
2 breakpoint del n <MULTIPLE>
2.1 y 0x00000000004005c2 in main at ../../../src/gdb/testsuite/gdb.multi/hello.c:40 inf 1
2.2 y 0x08048475 in main at ../../../src/gdb/testsuite/gdb.multi/hangout.c:22 inf 2
(gdb) enable 2
Warning:
Cannot insert breakpoint 2.
Error accessing memory address 0x4005c2: Unknown error -1.
And turning on remote debugging, we see:
(gdb) set debug remote 1
(gdb) disable 2
(gdb) enable 2
Sending packet: $Z0,4005c2,1#71...Packet received: E01
Sending packet: $Z0,8048475,1#87...Packet received: OK
Warning:
Cannot insert breakpoint 2.
Error accessing memory address 0x4005c2: Unknown error -1.
Notice that each of those Z0 breakpoints should be set in different
processes. However, no Hg packet to select a process has been sent in
between, so GDBserver tries to plant both on the same process that
happens to be current. The first Z0 then not so surprisingly fails.
IOW, the blame is on GDB, for telling GDBserver to plant both
breakpoints in the same process.
remote.c has a lazy scheme where it keeps a local cache of the
remote's selected general thread, and delays updating it on the remote
side until necessary (memory/register reads/writes, etc.). This is
done to reduce RSP traffic. The bug is that the Zx breakpoint
insert/remove methods weren't committing the selected thread/process
back to the remote side:
Breakpoint 3, remote_insert_breakpoint (gdbarch=0x1383ae0, bp_tgt=0x140c2b0) at ../../src/gdb/remote.c:8148
8148 if (remote_protocol_packets[PACKET_Z0].support != PACKET_DISABLE)
(top-gdb) p inferior_ptid
$3 = {pid = 3670, lwp = 0, tid = 3670}
(top-gdb) p general_thread
$4 = {pid = 3671, lwp = 0, tid = 3671}
IOW, a call to set_general_process is missing.
I did some auditing over remote.c, and added calls to all places I
found missing it.
This only used to work by chance before. breakpoint.c switches to a
thread of the target process before installing a breakpoint location.
That calls switch_to_thread. Before:
2012-07-27 Yao Qi <yao@codesourcery.com>
* thread.c (switch_to_thread): Don't call registers_changed.
that caused the register caches to all be flushed and refetched before
installing the breakpoint location. Given fetching registers commits
the remote general thread (with Hg), masking out the latent bug.
Tested on x86_64 Fedora 17 with GDBserver.
gdb/
2013-05-29 Pedro Alves <palves@redhat.com>
* remote.c (remote_insert_breakpoint, remote_remove_breakpoint)
(remote_insert_watchpoint, remote_remove_watchpoint)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory, compare_sections_command)
(remote_search_memory): Set the general process/thread on the
remote side.
This patch teaches GDB to take advantage of target-assisted range
stepping. It adds a new 'r ADDR1,ADDR2' action to vCont (vCont;r),
meaning, "step once, and keep stepping as long as the thread is in the
[ADDR1,ADDR2) range".
Rationale:
When user issues the "step" command on the following line of source,
a = b + c + d * e - a;
GDB single-steps every single instruction until the program reaches a
new different line. E.g., on x86_64, that line compiles to:
0x08048434 <+65>: mov 0x1c(%esp),%eax
0x08048438 <+69>: mov 0x30(%esp),%edx
0x0804843c <+73>: add %eax,%edx
0x0804843e <+75>: mov 0x18(%esp),%eax
0x08048442 <+79>: imul 0x2c(%esp),%eax
0x08048447 <+84>: add %edx,%eax
0x08048449 <+86>: sub 0x34(%esp),%eax
0x0804844d <+90>: mov %eax,0x34(%esp)
0x08048451 <+94>: mov 0x1c(%esp),%eax
and the following is the RSP traffic between GDB and GDBserver:
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:3c840408;thread:p2e13.2e13;core:1;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:3e840408;thread:p2e13.2e13;core:2;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:42840408;thread:p2e13.2e13;core:2;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:47840408;thread:p2e13.2e13;core:0;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:49840408;thread:p2e13.2e13;core:0;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:4d840408;thread:p2e13.2e13;core:0;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2e13.2e13;core:0;
IOW, a lot of roundtrips between GDB and GDBserver.
If we add a new command to the RSP, meaning "keep stepping and don't
report a stop until the program goes out of the [0x08048434,
0x08048451) address range", then the RSP traffic can be reduced down
to:
--> vCont;r8048434,8048451:p2db0.2db0;c
<-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2db0.2db0;core:1;
As number of packets is reduced dramatically, the performance of
stepping source lines is much improved.
In case something is wrong with range stepping on the stub side, the
debug info or even gdb, this adds a "set/show range-stepping" command
to be able to turn range stepping off.
gdb/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_control_state) <may_range_step>: New
field.
* infcmd.c (step_once, until_next_command): Enable range stepping.
* infrun.c (displaced_step_prepare): Disable range stepping.
(resume): Disable range stepping if stepping over a breakpoint or
we have software watchpoints. If range stepping is enabled,
assert the thread is in the stepping range.
(clear_proceed_status_thread): Clear may_range_step.
(handle_inferior_event): Disable range stepping as soon as we know
the thread that hit the event. Re-enable it whenever we're going
to step with a step range.
* remote.c (struct vCont_action_support) <r>: New field.
(use_range_stepping): New global.
(remote_vcont_probe): Handle 'r' action.
(append_resumption): Append an 'r' action if the thread may range
step.
(show_range_stepping): New function.
(set_range_stepping): New function.
(_initialize_remote): Call add_setshow_boolean_cmd to register the
'set range-stepping' and 'show range-stepping' commands.
* NEWS: Mention range stepping, the new vCont;r action, and the
new "set/show range-stepping" commands.
gdb/doc/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.texinfo (Packets): Document 'vCont;r'.
(Continuing and Stepping): Document target-assisted range
stepping, and the 'set range-stepping' and 'show range-stepping'
commands.
Convert the 'support_vCont_t' int field to a struct, in preparation
for adding more fields to it.
gdb/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* remote.c (struct vCont_action_support): New struct.
(struct remote_state) <support_vCont_t>: Remove field.
<vCont_actions_support>: New field.
(remote_vcont_probe, remote_stop_ns): Update.
I noticed:
(gdb) show remote traceframe-info-packet
Support for the `qXfer:trace-frame-info:read' packet is auto-detected, currently unknown.
^^^^^^^^^^^
The packet is actually qXfer:traceframe-info:read.
gdb/
2013-05-10 Pedro Alves <palves@redhat.com>
* remote.c (_initialize_remote): Fix spelling of
qXfer:traceframe-info:read packet in packet config command.
In the function remote_trace_set_readonly_regions in gdb/remote.c, the
local variable 'offset' does not account for "QTro" at the start of
the packet with the result that if there are any read-only regions,
the packet is sent -- but without the "QTro" -- causing the remote
stub to report that the packet is unsupported:
Sending packet: $:0000000000400200,(...),00000000004560a4#ab...Packet received:
vs the expected:
Sending packet: $QTro:0000000000400200,(...),00000000004560a4#31...Packet received: OK
We don't see the problem when testing with GDBserver, as that supports
qXfer:trace-frame-info:read, meaning GDBserver never needs to read
from the read-only sections directly itself. This commit adds a test
that explicitly disables qXfer:trace-frame-info:read.
gdb/
2013-05-10 David Taylor <dtaylor@emc.com>
PR remote/15455
* remote.c (remote_trace_set_readonly_regions): Do not overwrite
"QTro" at start of packet.
gdb/testsuite/
2013-05-10 Pedro Alves <palves@redhat.com>
PR remote/15455
* gdb.trace/qtro.c: New file.
* gdb.trace/qtro.exp: New file.
While the RSP is largely ASCII based (hence the packet buffer type is
char *), at places we pass around 8-bit binary packets in that buffer.
Functions like hex2bin or remote_escape_output conceptually are
handling binary buffers, so I left them as working with gdb_byte, and
added casts where necessary. Whether these are host bytes or target
bytes is blurry at present, so this is largely a matter of taste.
Switching some of these functions to take "char *" or "void *" would
be equally good.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* remote.c (remote_write_bytes_aux, compare_sections_command)
(remote_read_qxfer)
(remote_search_memory, remote_hostio_pwrite, remote_hostio_pread)
(remote_hostio_readlink, remote_bfd_iovec_pread)
(remote_set_trace_notes): Use gdb_byte when RSP buffer is used as
binary buffer, and char when buffer is used as string.
* tracepoint.c (encode_source_string, tfile_write_uploaded_tp)
(trace_save, tfile_open, traceframe_walk_blocks)
(tfile_fetch_registers): Likewise.
-Wpointer-sign catches all these cases across the codebase that should
be using gdb_byte for raw target bytes. I think these are all
obvious, hence I've collapsed into a single patch.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change type to
gdb_byte[].
(aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
* ada-lang.c (ada_value_assign): Use gdb_byte.
* alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
(alphanbsd_sigtramp_offset): Use gdb_byte.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
(arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
(eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
(arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
* arm-tdep.c (arm_stub_unwind_sniffer)
(arm_displaced_init_closure): Use gdb_byte.
(arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
(arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
* arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
* arm-wince-tdep.c (arm_wince_le_breakpoint)
(arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
(arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
(arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
(arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
* cris-tdep.c (push_stack_item, cris_push_dummy_call)
(cris_store_return_value, cris_extract_return_value): Use
gdb_byte.
(constraint): Change type of parameter to char * from signed
char*. Use gdb_byte.
* dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
of local buffer to gdb_byte *.
* dwarf2read.c (read_index_from_section): Use gdb_byte.
(create_dwp_hash_table): Change type of locals to gdb_byte *.
(add_address_entry): Change type of local buffer to gdb_byte[].
* frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
(frv_push_dummy_call): Use gdb_byte.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
(hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
(hppa_hpux_supply_save_state): Use gdb_byte.
* hppa-tdep.c (hppa32_push_dummy_call)
(hppa64_convert_code_addr_to_fptr): Use gdb_byte.
* ia64-tdep.c (extract_bit_field, replace_bit_field)
(slotN_contents, replace_slotN_contents): Change type of parameter
to gdb_byte *.
(fetch_instruction, ia64_pseudo_register_write)
(ia64_register_to_value, ia64_value_to_register)
(ia64_extract_return_value, ia64_store_return_value)
(ia64_push_dummy_call): Use gdb_byte.
* m32c-tdep.c (m32c_return_value): Remove cast.
* m68hc11-tdep.c (m68hc11_pseudo_register_write)
(m68hc11_push_dummy_call, m68hc11_store_return_value): Use
gdb_byte.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
* mn10300-tdep.c (mn10300_store_return_value)
(mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
gdb_byte.
* moxie-tdep.c (moxie_process_readu): Use gdb_byte.
(moxie_process_record): Remove casts.
* ppc-ravenscar-thread.c (supply_register_at_address)
(ppc_ravenscar_generic_store_registers): Use gdb_byte.
* ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
* remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
* remote-mips.c (mips_xfer_memory): Use gdb_byte.
* remote.c (compare_sections_command): Use gdb_byte.
* score-tdep.c (score7_free_memblock): Change type of parameter to
gdb_byte *.
* sh-tdep.c (sh_justify_value_in_reg): Change return type to
gdb_byte *. Use gdb_byte.
(sh_push_dummy_call_fpu): Use gdb_byte.
(sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
(sh_store_return_value_nofpu, sh_store_return_value_fpu)
(sh_register_convert_to_virtual, sh_register_convert_to_raw):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
* sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
(sh64_store_return_value, sh64_register_convert_to_virtual):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh64_pseudo_register_write): Use gdb_byte.
* solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
* solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
buffer.
(irix_current_sos): Use gdb_byte.
* solib-som.c (som_current_sos): Use gdb_byte.
* sparc-ravenscar-thread.c (supply_register_at_address)
(sparc_ravenscar_generic_store_registers): Use gdb_byte.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
* tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
'gdb_byte *'.
* tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
'gdb_byte *'.
* tracepoint.c (tfile_fetch_registers): Use gdb_byte.
* xstormy16-tdep.c (xstormy16_extract_return_value)
(xstormy16_store_return_value): Change parameter type to
'gdb_byte *'. Adjust.
(xstormy16_push_dummy_call): Use gdb_byte.
* xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
(call0_analyze_prologue, execute_code): Use gdb_byte.
The current throw_perror_with_name/TARGET_CLOSE_ERROR calls assume
errno is still set to the right error, although remote_unpush_target
is called in between, which may well change errno.
Tested on x86_64 Fedora 17 w/ gdbserver.
gdb/
2013-04-09 Pedro Alves <palves@redhat.com>
* remote.c (unpush_and_perror): New function.
(readchar, remote_serial_write): Use it.
* remote.c (remote_trace_find): Change type of parameters 'addr1'
and 'addr2' to CORE_ADDR.
* target.c (update_current_target): Update.
* target.h (struct target_ops) <to_trace_find>: Change parameter
type to CORE_ADDR.
* tracepoint.c (tfind_1): Change type of parameters 'addr1' and
'addr2' to CORE_ADDR.
(tfile_trace_find): Likewise.
(tfile_get_traceframe_address): Change return type to CORE_ADDR.
Change local variable 'addr' to type CORE_ADDR.
* tracepoint.h (tfind_1): Update declaration.
PR gdb/15275 notes that when debugging with a remote connection over a
serial link and the link is disconnected, say by disconnecting USB
serial port, the GDB quit command no longer works:
(gdb)
tar ext /dev/ttyACM0
&"tar ext /dev/ttyACM0\n"
~"Remote debugging using /dev/ttyACM0\n"
^done
(gdb)
set debug remote 1
&"set debug remote 1\n"
^done
(gdb)
quit
&"quit\n"
&"Sending packet: $qTStatus#49..."
&"putpkt: write failed: Input/output error.\n"
^error,msg="putpkt: write failed: Input/output error."
(gdb)
(gdb)
quit
&"quit\n"
&"Sending packet: $qTStatus#49..."
&"putpkt: write failed: Input/output error.\n"
^error,msg="putpkt: write failed: Input/output error."
This is not reproducible with TCP connections, as with that, sending
doesn't error out, but instead the error is detected on the subsequent
readchar. When that read fails, we unpush the remote target, and
throw TARGET_CLOSE_ERROR. To address PR gdb/15275, instead of
catching the error in remote_get_trace_status as presently done (which
leaves this same issue latent for another packet to trip on), or of
making ser-unix.c fake success too on failed writes, so we'd get to
readchar detecting the error on serial ports too, better let the error
propagate out of serial_write, and catch it at the remote.c level,
throwing away the target if writing fails too, instead of delaying
that until the next read.
gdb/
2013-04-02 Pedro Alves <palves@redhat.com>
PR gdb/15275
* remote.c (send_interrupt_sequence): Use remote_serial_write.
(remote_serial_write): New function.
(putpkt_binary, getpkt_or_notif_sane_1): Use remote_serial_write.
GDB currently sends a qTStatus even if the target previously replied
an empty packet to a previous qTStatus. If the target doesn't
recognize the packet, there's no point in trying again.
The machinery we have in place is packet_ok, which has the nice side
effect of forcing one to install a configuration command/knob for the
packet in question, which is often handy when you need to debug
things, and/or emulate a target that doesn't support the packet, or even,
it can be used as workaround for the old broken kgdb's that return error
to qTSTatus instead of an empty packet.
gdb/
2013-03-28 Pedro Alves <palves@redhat.com>
* NEWS (New options): New section.
(New options): Mention set/show remote trace-status-packet.
* remote.c (PACKET_qTStatus): New enumeration value.
(remote_get_trace_status): Skip sending qTStatus if the packet is
disabled. Use packet_ok.
(_initialize_remote): Register a configuration command for
qTStatus packet.
gdb/doc/
2013-03-28 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration) <set remote @var{name}-packet
table>: Add entry for "trace-status".
It makes no sense to talk about an "unlimited" address size in this
context.
(gdb) show remoteaddresssize
The maximum size of the address (in bits) in a memory packet is 0.
(gdb) set remoteaddresssize 0
(gdb) show remoteaddresssize
The maximum size of the address (in bits) in a memory packet is unlimited.
"set remoteaddresssize 0" mapping to UINT_MAX means you can't
force gdb through this path twice in the same GDB run:
static CORE_ADDR
remote_address_masked (CORE_ADDR addr)
{
unsigned int address_size = remote_address_size;
/* If "remoteaddresssize" was not set, default to target address size. */
if (!address_size)
address_size = gdbarch_addr_bit (target_gdbarch ());
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* remote.c (_initialize_remote): Make "set remoteaddresssize"
a zuinteger command instead of uinteger.
* exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
* remote.c (trace_error): Remove the special handling of '2'.
(readchar) <SERIAL_EOF>
(readchar) <SERIAL_ERROR>
(getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
(remote_get_trace_status): Call throw_exception if EX is
TARGET_CLOSE_ERROR.
* utils.c (perror_with_name): Rename to ...
(throw_perror_with_name): ... here. New parameter errcode, describe it
in the function comment.
(perror_with_name): New function wrapper.
* utils.h (enum errors): New stub declaration.
(throw_perror_with_name): New declaration.
gdb/testsuite/
* gdb.server/server-kill.c: New file.
* gdb.server/server-kill.exp: New file.
This is sort of a continuation of Keith's parse_exp_1 constification
patch. It started out by undoing these bits:
@@ -754,9 +754,12 @@ validate_actionline (char **line, struct
tmp_p = p;
for (loc = t->base.loc; loc; loc = loc->next)
{
- p = tmp_p;
- exp = parse_exp_1 (&p, loc->address,
+ const char *q;
+
+ q = tmp_p;
+ exp = parse_exp_1 (&q, loc->address,
block_for_pc (loc->address), 1);
+ p = (char *) q;
and progressively making more things const upwards, fixing fallout,
rinse repeat, until GDB built again (--enable-targets=all).
That ended up constifying lookup_cmd/add_cmd and (lots of) friends,
and the completers.
I didn't try to constify the command hooks themselves, because I know
upfront there are commands that write to the command string argument,
and I think I managed to stop at a nice non-hacky split point already.
I think the only non-really-super-obvious changes are
tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions.
The rest is just mostly about 'char *' => 'const char *', 'char **'=>
'const char **', and the occasional (e.g., deprecated_cmd_warning)
case of 'char **'=> 'const char *', where/when I noticed that nothing
actually cares about the pointer to pointer output.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-03-13 Pedro Alves <palves@redhat.com>
* ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
fields const.
(ada_make_symbol_completion_list): Make "text0" parameter const.
* ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
* breakpoint.c (condition_completer): Make "text" and "word"
parameters const. Adjust.
(check_tracepoint_command): Adjust to validate_actionline
prototype change.
(catch_syscall_completer): Make "text" and "word" parameters
const.
* cli/cli-cmds.c (show_user): Make "comname" local const.
(valid_command_p): Make "command" parameter const.
(alias_command): Make "alias_prefix" and "command_prefix" locals
const.
* cli/cli-decode.c (add_cmd): Make "name" parameter const.
(add_alias_cmd): Make "name" and "oldname" parameters const.
Adjust. No longer make copy of OLDNAME.
(add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
(delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
Make "name" parameter const.
(help_cmd): Rename "command" parameter to "arg". New const local
"command".
(find_cmd): Make "command" parameter const.
(lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
deprecated_cmd_warning prototype change.
(undef_cmd_error): Make "cmdtype" parameter const.
(lookup_cmd): Make "line" parameter const.
(deprecated_cmd_warning): Change type of "text" parameter to
pointer to const char, from pointer to pointer to char. Adjust.
(lookup_cmd_composition): Make "text" parameter const.
(complete_on_cmdlist, complete_on_enum): Make "text" and "word"
parameters const.
* cli/cli-decode.h (struct cmd_list_element) <name>: Make field
const.
* cli/cli-script.c (validate_comname): Make "tem" local const.
(define_command): New const local "tem_c". Use it in calls to
lookup_cmd.
(document_command): Make "tem" and "comfull" locals const.
(show_user_1): Make "prefix" and "name" parameters const.
* cli-script.h (show_user_1): Make "prefix" and "name" parameters
const.
* command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
(deprecated_cmd_warning, lookup_cmd_composition, add_com)
(add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
(complete_on_enum, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Change prototypes, constifying strings.
* completer.c (noop_completer, filename_completer): Make "text"
and "prefix" parameters const.
(location_completer, expression_completer)
(complete_line_internal): Make "text" and "prefix" parameters
const and adjust.
(command_completer, signal_completer): Make "text" and "prefix"
parameters const.
* completer.h (noop_completer, filename_completer)
(expression_completer, location_completer, command_completer)
(signal_completer): Change prototypes.
* corefile.c (complete_set_gnutarget): Make "text" and "word"
parameters const.
* cp-abi.c (cp_abi_completer): Likewise.
* expression.h (parse_expression_for_completion): Change
prototype.
* f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
parameters const.
* infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
* infrun.c (handle_completer): Make "text" and "word" parameters
const.
* interps.c (interpreter_completer): Make "text" and "word"
parameters const.
* language.h (struct language_defn)
<la_make_symbol_completion_list>: Make "text" and "word"
parameters const.
* parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
(parse_exp_in_context): Rename to ...
(parse_exp_in_context_1): ... this.
(parse_exp_in_context): Reimplement, with const hack from
parse_exp_1.
(parse_expression_for_completion): Make "string" parameter const.
* printcmd.c (decode_format): Make "string_ptr" parameter pointer
to pointer to const char. Adjust.
(print_command_1): Make "exp" parameter const.
(output_command): Rename to ...
(output_command_const): ... this. Make "exp" parameter const.
(output_command): Reimplement.
(x_command): Adjust.
(display_command): Rename "exp" parameter to "arg". New "exp"
local, const version of "arg".
* python/py-auto-load.c (gdbpy_initialize_auto_load): Make
"cmd_name" local const.
* python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
call.
(cmdpy_completer): Make "text" and "word" parameters const.
(gdbpy_parse_command_name): Make "prefix_text2" local const.
* python/py-param.c (add_setshow_generic): Make "tmp_name" local
const.
* remote.c (_initialize_remote): Make "cmd_name" local const.
* symtab.c (language_search_unquoted_string): Make "text" and "p"
parameters const. Adjust.
(completion_list_add_fields): Make "sym_text", "text" and "word"
parameters const.
(struct add_name_data) <sym_text, text, word>: Make fields const.
(default_make_symbol_completion_list_break_on): Make "text" and
"word" parameters const. Adjust locals.
(default_make_symbol_completion_list)
(make_symbol_completion_list, make_symbol_completion_type)
(make_symbol_completion_list_fn): Make "text" and "word"
parameters const.
(make_file_symbol_completion_list): Make "text", "word" and
"srcfile" parameters const. Adjust locals.
(add_filename_to_list): Make "text" and "word" parameters const.
(struct add_partial_filename_data) <text, word>: Make fields
const.
(make_source_files_completion_list): Make "text" and "word"
parameters const.
* symtab.h (default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type enum type_code)
(make_symbol_completion_list_fn make_file_symbol_completion_list)
(make_source_files_completion_list): Change prototype.
* top.c (execute_command): Adjust to pass pointer to pointer to
const char to lookup_cmd, and to deprecated_cmd_warning prototype
change.
(set_verbose): Make "cmdname" local const.
* tracepoint.c (decode_agent_options): Make "exp" parameter const,
and adjust.
(validate_actionline): Make "line" parameter a pointer to const
char, and adjust.
(encode_actions_1): Make "action_exp" local const, and adjust.
(encode_actions): Adjust.
(replace_comma): Delete.
(trace_dump_actions): Make "action_exp" and "next_comma" locals
const, and adjust. Don't frob the action string while splitting
it at commas. Instead, make a copy of each split substring in
turn.
(trace_dump_command): Adjust to validate_actionline prototype
change.
* tracepoint.h (decode_agent_options, decode_agent_options)
(encode_actions, validate_actionline): Change prototypes.
* valprint.h (output_command): Delete declaration.
(output_command_const): Declare.
* value.c (function_destroyer): Cast const away in xfree call.
We define the following packets:
Qbtrace:bts enable branch tracing for the current thread
returns "OK" or "Enn"
Qbtrace:off disable branch tracing for the current thread
returns "OK" or "Enn"
qXfer:btrace:read read the full branch trace data for the current thread
gdb/
* target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
* remote.c: Include btrace.h.
(struct btrace_target_info): New struct.
(remote_supports_btrace): New function.
(send_Qbtrace): New function.
(remote_enable_btrace): New function.
(remote_disable_btrace): New function.
(remote_teardown_btrace): New function.
(remote_read_btrace): New function.
(init_remote_ops): Add btrace ops.
(enum <unnamed>): Add btrace packets.
(struct protocol_feature remote_protocol_features[]): Add btrace packets.
(_initialize_remote): Add packet configuration for branch tracing.
gdbserver/
* target.h (struct target_ops): Add btrace ops.
(target_supports_btrace): New macro.
(target_enable_btrace): New macro.
(target_disable_btrace): New macro.
(target_read_btrace): New macro.
* gdbthread.h (struct thread_info): Add btrace field.
* server.c: Include btrace-common.h.
(handle_btrace_general_set): New function.
(handle_btrace_enable): New function.
(handle_btrace_disable): New function.
(handle_general_set): Call handle_btrace_general_set.
(handle_qxfer_btrace): New function.
(struct qxfer qxfer_packets[]): Add btrace entry.
* inferiors.c (remove_thread): Disable btrace.
* linux-low: Include linux-btrace.h.
(linux_low_enable_btrace): New function.
(linux_low_read_btrace): New function.
(linux_target_ops): Add btrace ops.
* configure.srv (i[34567]86-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
(x86_64-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
* configure.ac: Define HAVE_LINUX_BTRACE.
* config.in: Regenerated.
* configure: Regenerated.
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention set and show trace-buffer-size commands.
Mention new packet.
* target.h (struct target_ops): New method
to_set_trace_buffer_size.
(target_set_trace_buffer_size): New macro.
* target.c (update_current_target): Set up new method.
* tracepoint.c (trace_buffer_size): New global.
(start_tracing): Send it to the target.
(set_trace_buffer_size): New function.
(_initialize_tracepoint): Add new setshow for trace-buffer-size.
* remote.c (remote_set_trace_buffer_size): New function.
(_initialize_remote): Use it.
(QTBuffer:size) New remote command.
(PACKET_QTBuffer_size): New enum.
(remote_protocol_features): Add an entry for
PACKET_QTBuffer_size.
gdb/gdbserver/
* tracepoint.c (trace_buffer_size): New global.
(DEFAULT_TRACE_BUFFER_SIZE): New define.
(init_trace_buffer): Change to one-argument function. Allocate
trace buffer memory.
(handle_tracepoint_general_set): Call cmd_bigqtbuffer_size to
handle QTBuffer:size packet.
(cmd_bigqtbuffer_size): New function.
(initialize_tracepoint): Call init_trace_buffer with
DEFAULT_TRACE_BUFFER_SIZE.
* server.c (handle_query): Add QTBuffer:size in the
supported packets.
gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
trace-buffer-size set and show commands.
(Tracepoint Packets): Document QTBuffer:size.
(General Query Packets): Document QTBuffer:size.
gdb/testsuite/
* gdb.trace/trace-buffer-size.exp: New file.
* gdb.trace/trace-buffer-size.c: New file.
Move the declarations to a header, rather than declaring them in
(multiple) .c files.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* remote.c (hex2bin, bin2hex): Move extern declarations to ...
* remote.h (hex2bin, bin2hex): ... here.
* tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention new field "trace-file".
* tracepoint.c (trace_status_mi): Output "trace-file" field.
(tfile_open): Record the trace file's filename in the trace
status.
(tfile_files_info): Mention the name of the trace file.
Check the "filename" field explicitely.
(trace_status_command): Explicitely check "filename" field.
(trace_find_command): Ditto.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
* tracepoint.h (struct trace_status) <from_file>: Rename it
to "filename" and make it hold the trace file's filename
instead of a boolean.
* remote.c (remote_get_trace_status): Initialize "filename"
field with NULL instead of 0.
gdb/doc/
* gdb.texinfo (GDB/MI Tracepoint Commands) <-trace-status>:
Document the "trace-file" field.
gdb/testsuite/
* gdb.trace/tfile.exp: Add test for -trace-status command.
Yao writes:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GDB gets an internal error when it connects to GDBserver started with
'--disable-packet=qC'.
Sending packet: $QNonStop:0#8c...Packet received: OK
Sending packet: $?#3f...Packet received: T0505:00000000;04:00f0ffbf;08:b0c2e44c;thread:p4255.4255;core:1;
Sending packet: $Hc-1#09...Packet received: E01
Sending packet: $qC#b4...Packet received:
Sending packet: $qAttached:a410#bf...Packet received: E01
Packet qAttached (query-attached) is supported
warning: Remote failure reply: E01
Sending packet: $qOffsets#4b...Packet received:
../../../git/gdb/target.c:3248: internal-error: Can't determine the current address space of thread Thread 16981
When start remote, the call chain is as follows,
remote_start_remote
add_current_inferior_and_thread <--[1]
...
start_remote
wait_for_inferior
remote_wait_as
process_stop_reply
get_thread_arch_regcache <--[2]
remote_notice_new_inferior <--[3]
GDB sends packet "qC" in [1] and adds the thread/inferior if the remote
stubs understands "qC". In [2], GDB looks for the inferior to build a
regcache, and notices a new inferior in [3]. As we can see, GDB assumes
that the inferior can be found in [2]. Once the remote stub doesn't
support "qC", GDB can't look for the inferior in [2], and emits an
internal error.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Right after the initial connection, we query the target for its state,
with the ? packet. We store the resulting wait status / stop reply
aside, and query the target for the current thread, using qC, which
fails, so we fake a ptid for the target's thread. We then later,
after the initial setup, end up consuming that set-aside wait status,
parsing the T stop reply, which contains a "thread" "register" (which
was the thread the target would have replied to qC). We get into
trouble because the ptid in that stop reply doesn't match our faked up
ptid in the initial setup, although the target threads are the same...
So we had the T stop reply handy all along. We might as well extract
the thread's ptid from it, and avoid all the resulting issues.
qC is also used after vRun, in order to discover the new process'es
main thread. But, vRun's reply is also a wait status, just like
'?''s, which is quite convenient.
This means that if we have a "Txx thread: ptid" reply, then we don't
really need qC. The patch makes GDB look in the T reply first, and if
not found, try with qC. The packet handling seems to have been added
in gdb-4.18 (1999), and I see that in that same release, "Txx thread:
ptid" didn't exist yet, which probably explains why nobody though of
doing this before.
Regression tested against a gdbserver with qC disabled (and then
enabled), on x86_64 Fedora 17.
2013-01-25 Pedro Alves <palves@redhat.com>
* remote.c (stop_reply_extract_thread): New.
(add_current_inferior_and_thread): New parameter 'wait_status'.
Handle it.
(remote_start_remote): Pass wait status to
add_current_inferior_and_thread.
(extended_remote_run): Update comment.
(extended_remote_create_inferior_1): Pass wait status to
add_current_inferior_and_thread.
Pedro Alves <palves@redhat.com>
PR remote/14786
* remote.c (remote_threads_info): Make a copy of the reply from
qfThreadInfo and use that instead of rs->buf.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2012-12-15 Yao Qi <yao@codesourcery.com>
* remote.c (getpkt_or_notif_sane): Add one more argument in
its declaration.
(getpkt_or_notif_sane_1): Add one more argument.
(getpkt_sane): Update caller.
(getpkt_or_notif_sane): Likewise. Update call
togetpkt_or_notif_sane_1.
(remote_wait_ns): Update caller.
there is an error inserting hardware breakpoints and use the
error message from the target.
* gdb/breakpoint.c (insert_bp_location, insert_breakpoint_locations):
Catch this exception and print the error message contained within. Do not
print the default hardware error breakpoint message in this case.
