Some targets provide aligned .bss sections, so explicitly align.
msp430 and rl78 emit "magic" symbols when assembling symbol.s, and
mips targets emit STT_OBJECT rather than STT_NOTYPE syms.
* binutils-all/strip-12.s: Align .bss section.
* binutils-all/strip-12.d: Adjust.
* binutils-all/symbols-1.d: Allow extraneous symbols.
* binutils-all/symbols-2.d: Likewise, and V for weakened syms.
* binutils-all/symbols-3.d: Likewise.
* binutils-all/symbols-4.d: Likewise.
PR gas/18765
* config/tc-arm.c (move_or_literal_pool): Use U suffix to remove
compile time warnings about constant expressions being shifted
into bit 31.
(do_iwmmxt_wldstd): Likewise.
(do_iwmmxt_wrwrwr_or_imm5): Likewise.
(md_assemble): Likewise.
Test symbols did not demangle as per the d-demangle-expected tests because
strtod() on Solaris 9 does not accept hexadecimal numbers.
This has now been fixed up so that no attempt at formatting/converting the
demangled hexadecimal literals are done.
libiberty/ChangeLog:
2015-08-11 Iain Buclaw <ibuclaw@gdcproject.org>
* d-demangle.c (dlang_parse_real): Remove call to strtod.
(strtod): Remove declaration.
* testsuite/d-demangle-expected: Update float and complex literal
tests to check correct hexadecimal demangling.
gdb/ChangeLog:
* symtab.c (make_file_symbol_completion_list_1): Renamed from
make_file_symbol_completion_list and made static.
(make_file_symbol_completion_list): New function.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Add location completer tests.
This patch replaces the "hidden" field with the "versioned" field in
elf_link_hash_entry so that we can avoid calling strchr and strrchr if
the symbol is unversioned.
* elf-bfd.h (elf_symbol_version): New enum.
(elf_link_hash_entry): Replace hidden with versioned.
* elflink.c (_bfd_elf_merge_symbol): Don't look for symbol
version if the symbol is unversioned. Initialize versioned.
(_bfd_elf_add_default_symbol): Don't look for symbol version
if the symbol is unversioned or hidden. Initialize versioned.
(elf_collect_hash_codes): Don't look for symbol version if the
symbol is unversioned.
(elf_collect_gnu_hash_codes): Likewise.
(bfd_elf_gc_mark_dynamic_ref_symbol): Likewise.
(_bfd_elf_link_hash_copy_indirect): Check versioned instead of
hidden.
(elf_link_output_extsym): Likewise.
When copying the sh_link and sh_info fields in stripped section headers,
we also check if the sh_type, sh_flags, /sh_addralign and sh_entsize
fields of the output section match the output. Since --only-keep-debug
turns all non-debug sections into SHT_NOBITS sections, the output
SHT_NOBITS type matches any input type.
bfd/
PR binutils/18785
* elf.c (_bfd_elf_copy_private_bfd_data): When copying the
sh_link and sh_info fields in stripped section headers, we also
check if the sh_type, sh_flags, /sh_addralign and sh_entsize
fields of the output section match the output. Since
--only-keep-debug turns all non-debug sections into SHT_NOBITS
sections, the output SHT_NOBITS type matches any input type.
binutils/testsuite/
PR binutils/18785
* binutils-all/objcopy.exp: Run strip-12.
* binutils-all/strip-12.d: New file.
* binutils-all/strip-12.s: Likewise.
The testsuite shows no regressions with this forced on, on:
- Native x86_64 Fedora 20, with and output "set displaced off".
- Native x86_64 Fedora 20, on top of x86 software single-step series.
- PPC64 Fedora 18.
- S/390 RHEL 7.1.
Let's try making it the default.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_nat_always_non_stop_p): Return 1.
This adds displaced stepping support for the General-Instruction
Extension Facility instructions, which have a PC-relative displacement
(RIL-b/RIL-c). We already handle RIL branches, but not others.
Currently, displaced stepping a breakpoint put on any of these
instructions results in the inferior crashing when or after the
instruction is executed out-of-line in the scratch pad.
This patch takes the easy route of patching the displacement in the
copy of the instruction in the scratch pad. As the displacement is a
signed 32-bit field, it's possible that the stratch pad ends too far
that the needed displacement doesn't fit in the adjusted instruction,
as e.g., if stepping over a breakpoint in a shared library (the
scratch pad is around the main program's entry point). That case is
detected and GDB falls back to stepping over the breakpoint in-line
(which involves pausing all threads momentarily).
(We could probably do something smarter, but I don't plan on doing it
myself. This was already sufficient to get "maint set target-non-stop
on" working regression free on S/390.)
Tested on S/390 RHEL 7.1, where it fixes a few hundred FAILs when
testing with displaced stepping force-enabled, with the end result
being no regressions compared to a test run that doesn't force
displaced stepping. Fixes the non-stop tests compared to mainline
too; most are crashing due to this on the machine I run tests on.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* s390-linux-tdep.c (is_non_branch_ril)
(s390_displaced_step_copy_insn): New functions.
(s390_displaced_step_fixup): Update comment.
(s390_gdbarch_init): Install s390_displaced_step_copy_insn as
gdbarch_displaced_step_copy_insn hook.
The ppc64 displaced step code can't handle atomic sequences. Fallback
to stepping over the breakpoint in-line if we detect one.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (displaced_step_prepare_throw): Return -1 if
gdbarch_displaced_step_copy_insn returns NULL. Update intro
comment.
* rs6000-tdep.c (LWARX_MASK, LWARX_INSTRUCTION, LDARX_INSTRUCTION)
(STWCX_MASK, STWCX_INSTRUCTION, STDCX_INSTRUCTION): Move higher up
in file.
(ppc_displaced_step_copy_insn): New function.
(ppc_displaced_step_fixup): Update comment.
(rs6000_gdbarch_init): Install ppc_displaced_step_copy_insn as
gdbarch_displaced_step_copy_insn hook.
* gdbarch.sh (displaced_step_copy_insn): Document what happens on
NULL return.
* gdbarch.h: Regenerate.
gdb/testsuite/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.arch/ppc64-atomic-inst.exp (do_test): New procedure, move
tests here.
(top level): Run do_test with and without displaced stepping.
Running the testsuite with "maint set target-non-stop on" shows:
(gdb) PASS: gdb.base/valgrind-infcall.exp: continue #98 (false warning)
continue
Continuing.
dl_main (phdr=<optimized out>..., auxv=<optimized out>) at rtld.c:2302
2302 LIBC_PROBE (init_complete, 2, LM_ID_BASE, r);
Cannot access memory at address 0x400532
(gdb) PASS: gdb.base/valgrind-infcall.exp: continue #99 (false warning)
p gdb_test_infcall ()
$1 = 1
(gdb) FAIL: gdb.base/valgrind-infcall.exp: p gdb_test_infcall ()
Even though that was a native GNU/Linux test run, this test spawns
Valgrind and connects to it with "target remote". The error above is
actually orthogonal to target-non-stop. The real issue is that that
enables displaced stepping, and displaced stepping doesn't work with
Valgrind, because we can't write to the inferior memory (thus can't
copy the instruction to the scratch pad area).
I'm sure there will be other targets with the same issue, so trying to
identify Valgrind wouldn't be sufficient. The fix is to try setting
up the displaced step anyway. If we get a MEMORY_ERROR, we disable
displaced stepping for that inferior, and fall back to doing an
in-line step-over. If "set displaced-stepping" is "on" (as opposed to
"auto), GDB warns displaced stepping failed ("on" is mainly useful for
the testsuite, not for users).
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* inferior.h (struct inferior) <displaced_stepping_failed>: New
field.
* infrun.c (use_displaced_stepping_now_p): New parameter 'inf'.
Return false if dispaced stepping failed before.
(resume): Pass the current inferior to
use_displaced_stepping_now_p. Wrap displaced_step_prepare in
TRY/CATCH. If we get a MEMORY_ERROR, set the inferior's
displaced_stepping_failed flag, and fall back to an in-line
step-over.
gdb/testsuite/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.base/valgrind-disp-step.c: New file.
* gdb.base/valgrind-disp-step.exp: New file.
On a target that is both always in non-stop mode and can do displaced
stepping (such as native x86_64 GNU/Linux, with "maint set
target-non-stop on"), the step-over-trips-on-watchpoint.exp test
sometimes fails like this:
(gdb) PASS: gdb.threads/step-over-trips-on-watchpoint.exp: no thread-specific bp: step: thread 1
set scheduler-locking off
(gdb) PASS: gdb.threads/step-over-trips-on-watchpoint.exp: no thread-specific bp: step: set scheduler-locking off
step
-[Switching to Thread 0x7ffff7fc0700 (LWP 11782)]
-Hardware watchpoint 4: watch_me
-
-Old value = 0
-New value = 1
-child_function (arg=0x0) at /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.threads/step-over-trips-on-watchpoint.c:39
-39 other = 1; /* set thread-specific breakpoint here */
-(gdb) PASS: gdb.threads/step-over-trips-on-watchpoint.exp: no thread-specific bp: step: step
+wait_threads () at /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.threads/step-over-trips-on-watchpoint.c:49
+49 return 1; /* in wait_threads */
+(gdb) FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: no thread-specific bp: step: step
Note "scheduler-locking" was set off. The problem is that on such
targets, the step-over of thread 2 and the "step" of thread 1 can be
set to run simultaneously (since with displaced stepping the
breakpoint isn't ever removed from the target), and sometimes, the
"step" of thread 1 finishes first, so it'd take another resume to see
the watchpoint trigger. Fix this by replacing the wait_threads
function with a one-line infinite loop that doesn't call any function,
so that the "step" of thread 1 never finishes.
gdb/testsuite/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.threads/step-over-lands-on-breakpoint.c (wait_threads):
Delete function.
(main): Add alarm. Run an infinite loop instead of calling
wait_threads.
* gdb.threads/step-over-lands-on-breakpoint.exp (do_test): Change
comment.
* gdb.threads/step-over-trips-on-watchpoint.c (wait_threads):
Delete function.
(main): Add alarm. Run an infinite loop instead of calling
wait_threads.
* gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Change
comment.
With "maint set target-non-stop on" we get:
@@ -66,13 +66,16 @@ Continuing.
interrupt
(gdb) PASS: gdb.base/interrupt-noterm.exp: interrupt
-Program received signal SIGINT, Interrupt.
-PASS: gdb.base/interrupt-noterm.exp: inferior received SIGINT
-testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 0 seconds
+[process 12119] #1 stopped.
+0x0000003615ebc6d0 in __nanosleep_nocancel () at ../sysdeps/unix/syscall-template.S:81
+81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
+FAIL: gdb.base/interrupt-noterm.exp: inferior received SIGINT (timeout)
+testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 10 seconds
That is, we get "[$thread] #1 stopped" instead of SIGINT.
The issue is that we don't currently distinguish send
"interrupt/ctrl-c" to target terminal vs "stop/pause" thread well;
both cases go through "target_stop".
And then, the native Linux backend (linux-nat.c) implements
target_stop with SIGSTOP in non-stop mode, and SIGINT in all-stop
mode. Since "maint set target-non-stop on" forces the backend to be
always running in non-stop mode, even though the user-visible behavior
is "set non-stop" is "off", "interrupt" causes a SIGSTOP instead of
the SIGINT the test expects.
Fix this by introducing a target_interrupt method to use in the
"interrupt/ctrl-c" case, so "set non-stop off" can always work the
same irrespective of "maint set target-non-stop on/off". I'm
explictly considering changing the "set non-stop on" behavior as out
of scope here.
Most of the patch is an across-the-board rename of to_stop hook
implementations to to_interrupt. The only targets where something
more than a rename is being done are linux-nat.c and remote.c, which
are the only targets that support async, and thus are the only ones
the core side calls target_stop on.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_stop): Rename to ...
(darwin_interrupt): ... this.
(_initialize_darwin_inferior): Adjust.
* gnu-nat.c (gnu_stop): Delete.
(gnu_target): Don't install gnu_stop.
* inf-ptrace.c (inf_ptrace_stop): Rename to ...
(inf_ptrace_interrupt): ... this.
(inf_ptrace_target): Adjust.
* infcmd.c (interrupt_target_1): Use target_interrupt instead of
target_stop.
* linux-nat (linux_nat_stop): Rename to ...
(linux_nat_interrupt): ... this.
(linux_nat_stop): Reimplement.
(linux_nat_add_target): Install linux_nat_interrupt.
* nto-procfs.c (nto_interrupt_twice): Rename to ...
(nto_handle_sigint_twice): ... this.
(nto_interrupt): Rename to ...
(nto_handle_sigint): ... this. Call target_interrupt instead of
target_stop.
(procfs_wait): Adjust.
(procfs_stop): Rename to ...
(procfs_interrupt): ... this.
(init_procfs_targets): Adjust.
* procfs.c (procfs_stop): Rename to ...
(procfs_interrupt): ... this.
(procfs_target): Adjust.
* remote-m32r-sdi.c (m32r_stop): Rename to ...
(m32r_interrupt): ... this.
(init_m32r_ops): Adjust.
* remote-sim.c (gdbsim_stop_inferior): Rename to ...
(gdbsim_interrupt_inferior): ... this.
(gdbsim_stop): Rename to ...
(gdbsim_interrupt): ... this.
(gdbsim_cntrl_c): Adjust.
(init_gdbsim_ops): Adjust.
* remote.c (sync_remote_interrupt): Adjust comments.
(remote_stop_as): Rename to ...
(remote_interrupt_as): ... this.
(remote_stop): Adjust comment.
(remote_interrupt): New function.
(init_remote_ops): Install remote_interrupt.
* target.c (target_interrupt): New function.
* target.h (struct target_ops) <to_interrupt>: New field.
(target_interrupt): New declaration.
* windows-nat.c (windows_stop): Rename to ...
(windows_interrupt): ... this.
* target-delegates.c: Regenerate.
With "maint set target-non-stop on" we get:
-PASS: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
+FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
The issue is simply that switch_back_to_stepped_thread is not used in
non-stop mode, thus infrun doesn't output the expected "switching back
to stepped thread" log.
gdb/testsuite/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* signal-while-stepping-over-bp-other-thread.exp: Expect "restart
threads" as alternative to "switching back to stepped thread".
This finally implements user-visible all-stop mode running with the
target_ops backend always in non-stop mode. This is a stepping stone
towards finer-grained control of threads, being able to do interesting
things like thread groups, associating groups with breakpoints, etc.
From the user's perspective, all-stop mode is really just a special
case of being able to stop and resume specific sets of threads, so it
makes sense to do this step first.
With this, even in all-stop, the target is no longer in charge of
stopping all threads before reporting an event to the core -- the core
takes care of it when it sees fit. For example, when "next"- or
"step"-ing, we can avoid stopping and resuming all threads at each
internal single-step, and instead only stop all threads when we're
about to present the stop to the user.
The implementation is almost straight forward, as the heavy lifting
has been done already in previous patches. Basically, we replace
checks for "set non-stop on/off" (the non_stop global), with calls to
a new target_is_non_stop_p function. In a few places, if "set
non-stop off", we stop all threads explicitly, and in a few other
places we resume all threads explicitly, making use of existing
methods that were added for teaching non-stop to step over breakpoints
without displaced stepping.
This adds a new "maint set target-non-stop on/off/auto" knob that
allows both disabling the feature if we find problems, and
force-enable it for development (useful when teaching a target about
this. The default is "auto", which means the feature is enabled if a
new target method says it should be enabled. The patch implements the
method in linux-nat.c, just for illustration, because it still returns
false. We'll need a few follow up fixes before turning it on by
default. This is a separate target method from indicating regular
non-stop support, because e.g., while e.g., native linux-nat.c is
close to regression free with all-stop-non-stop (with following
patches will fixing the remaining regressions), remote.c+gdbserver
will still need more fixing, even though it supports "set non-stop
on".
Tested on x86_64 Fedora 20, native, with and without "set displaced
off", and with and without "maint set target-non-stop on"; and also
against gdbserver.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* NEWS: Mention "maint set/show target-non-stop".
* breakpoint.c (update_global_location_list): Check
target_is_non_stop_p instead of non_stop.
* infcmd.c (attach_command_post_wait, attach_command): Likewise.
* infrun.c (show_can_use_displaced_stepping)
(can_use_displaced_stepping_p, start_step_over_inferior):
Likewise.
(internal_resume_ptid): New function.
(resume): Use it.
(proceed): Check target_is_non_stop_p instead of non_stop. If in
all-stop mode but the target is always in non-stop mode, start all
the other threads that are implicitly resumed too.
(for_each_just_stopped_thread, fetch_inferior_event)
(adjust_pc_after_break, stop_all_threads): Check
target_is_non_stop_p instead of non_stop.
(handle_inferior_event): Likewise. Handle detach-fork in all-stop
with the target always in non-stop mode.
(handle_signal_stop) <random signal>: Check target_is_non_stop_p
instead of non_stop.
(switch_back_to_stepped_thread): Check target_is_non_stop_p
instead of non_stop.
(keep_going_stepped_thread): Use internal_resume_ptid.
(stop_waiting): If in all-stop mode, and the target is in non-stop
mode, stop all threads.
(keep_going_pass): Likewise, when starting a new in-line step-over
sequence.
* linux-nat.c (get_pending_status, select_event_lwp)
(linux_nat_filter_event, linux_nat_wait_1, linux_nat_wait): Check
target_is_non_stop_p instead of non_stop.
(linux_nat_always_non_stop_p): New function.
(linux_nat_stop): Check target_is_non_stop_p instead of non_stop.
(linux_nat_add_target): Install linux_nat_always_non_stop_p.
* target-delegates.c: Regenerate.
* target.c (target_is_non_stop_p): New function.
(target_non_stop_enabled, target_non_stop_enabled_1): New globals.
(maint_set_target_non_stop_command)
(maint_show_target_non_stop_command): New functions.
(_initilize_target): Install "maint set/show target-non-stop"
commands.
* target.h (struct target_ops) <to_always_non_stop_p>: New field.
(target_non_stop_enabled): New declaration.
(target_is_non_stop_p): New declaration.
gdb/doc/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Maintenance Commands): Document "maint set/show
target-non-stop".
That is, step past breakpoints by:
- pausing all threads
- removing breakpoint at PC
- single-step
- reinsert breakpoint
- restart threads
similarly to all-stop (with displaced stepping disabled). This allows
non-stop to work on targets/architectures without displaced stepping
support. That is, it makes displaced stepping an optimization instead
of a requirement. For example, in principle, all GNU/Linux ports
support non-stop mode at the target_ops level, but not all
corresponding gdbarch's implement displaced stepping. This should
make non-stop work for all (albeit, not as efficiently). And then
there are scenarios where even if the architecture supports displaced
stepping, we can't use it, because we e.g., don't find a usable
address to use as displaced step scratch pad. It should also fix
stepping past watchpoints on targets that have non-continuable
watchpoints in non-stop mode (e.g., PPC, untested). Running the
instruction out of line in the displaced stepping scratch pad doesn't
help that case, as the copied instruction reads/writes the same
watched memory... We can fix that too by teaching GDB to only remove
the watchpoint from the thread that we want to move past the
watchpoint (currently, removing a watchpoint always removes it from
all threads), but again, that can be considered an optimization; not
all targets would support it.
For those familiar with the gdb and gdbserver Linux target_ops
backends, the implementation should look similar, except it is done on
the core side. When we pause threads, we may find they stop with an
interesting event that should be handled later when the thread is
re-resumed, thus we store such events in the thread object, and mark
the event as pending. We should only consume pending events if the
thread is indeed resumed, thus we add a new "resumed" flag to the
thread object. At a later stage, we might add new target methods to
accelerate some of this, like "pause all threads", with corresponding
RSP packets, but we'd still need a fallback method for remote targets
that don't support such packets, so, again, that can be deferred as
optimization.
My _real_ motivation here is making it possible to reimplement
all-stop mode on top of the target always working on non-stop mode, so
that e.g., we can send RSP packets to a remote target even while the
target is running -- can't do that in the all-stop RSP variant, by
design).
Tested on x86_64 Fedora 20, with and without "set displaced off"
forced. The latter forces the new code paths whenever GDB needs to
step past a breakpoint.
gdb/ChangeLog:
2015-08-07 Pedro Alves <pedro@codesourcery.com>
* breakpoint.c (breakpoints_should_be_inserted_now): If any thread
has a pending status, return true.
* gdbthread.h: Include target/waitstatus.h.
(struct thread_suspend_state) <stop_reason, waitstatus_pending_p,
stop_pc>: New fields.
(struct thread_info) <resumed>: New field.
(set_resumed): Declare.
* infrun.c: Include "event-loop.h".
(infrun_async_inferior_event_token, infrun_is_async): New globals.
(infrun_async): New function.
(clear_step_over_info): Add debug output.
(displaced_step_in_progress_any_inferior): New function.
(displaced_step_fixup): New returns int.
(start_step_over): Handle in-line step-overs too. Assert the
thread is marked resumed.
(resume_cleanups): Clear the thread's resumed flag.
(resume): Set the thread's resumed flag. Return early if the
thread has a pending status. Allow stepping a breakpoint with no
signal.
(proceed): Adjust to check 'resumed' instead of 'executing'.
(clear_proceed_status_thread): If the thread has a pending status,
and that status is a finished step, discard the pending status.
(clear_proceed_status): Don't clear step_over_info here.
(random_pending_event_thread, do_target_wait): New functions.
(prepare_for_detach, wait_for_inferior, fetch_inferior_event): Use
do_target_wait.
(wait_one): New function.
(THREAD_STOPPED_BY): New macro.
(thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint)
(thread_stopped_by_hw_breakpoint): New functions.
(switch_to_thread_cleanup, save_waitstatus, stop_all_threads): New
functions.
(handle_inferior_event): Also call set_resumed(false) on all
threads implicitly stopped by the event.
(restart_threads, resumed_thread_with_pending_status): New
functions.
(finish_step_over): If we were doing an in-line step-over before,
and no longer are after trying to start a new step-over, restart
all threads. If we have multiple threads with pending events,
save the current event and go through the event loop again.
(handle_signal_stop): Return early if finish_step_over returns
false.
<random signal>: If we get a signal while stepping over a
breakpoint in-line in non-stop mode, restart all threads. Clear
step_over_info before delivering the signal.
(keep_going_stepped_thread): Use internal_error instead of
gdb_assert. Mark the thread as resumed.
(keep_going_pass_signal): Assert the thread isn't already resumed.
If some other thread is doing an in-line step-over, defer the
resume. If we just started a new in-line step-over, stop all
threads. Don't clear step_over_info.
(infrun_async_inferior_event_handler): New function.
(_initialize_infrun): Create async event handler with
infrun_async_inferior_event_handler as callback.
(infrun_async): New declaration.
* target.c (target_async): New function.
* target.h (target_async): Declare macro and readd as function
declaration.
* target/waitstatus.h (enum target_stop_reason)
<TARGET_STOPPED_BY_SINGLE_STEP>: New value.
* thread.c (new_thread): Clear the new waitstatus field.
(set_resumed): New function.
Just a code refactor, no funcionality change intended.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (keep_going_stepped_thread): New function, factored out
from ...
(switch_back_to_stepped_thread): ... here.
Clarify that currently_stepping works at a higher level than
target_resume.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (currently_stepping): Extend intro comment.
* target.h (target_resume): Extend intro comment.
Several misc cleanups that prepare the tail end of this function, the
part that actually re-resumes the stepped thread.
The most non-obvious would be the currently_stepping change, I guess.
That's because it isn't ever correct to pass step=1 to target_resume
on software single-step targets, and currently_stepping works at a
conceptual higher level, it returns step=true even on software step
targets. It doesn't really matter on hardware step targets, as the
breakpoint will be hit immediately, but it's just wrong on software
step targets. I tested it against my x86 software single-step branch,
and it indeed fixes failed assertions (that catch spurious
PTRACE_SINGLESTEP requests) there.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (switch_back_to_stepped_thread): Use ecs->ptid instead
of inferior_ptid. If the stepped thread vanished, return 0
instead of resuming here. Use reset_ecs. Print the prev_pc and
the current stop_pc in log message. Clear trap_expected if the
thread advanced. Don't pass currently_stepping to
do_target_resume.
The main motivation of this patch is sharing more code between the
proceed (starting the inferior for the first time) and keep_going
(restarting the inferior after handling an event) paths and using the
step_over_chain queue now embedded in the thread_info object for
pending in-line step-overs too (instead of just for displaced
stepping).
So this commit:
- splits out a new keep_going_pass_signal function out of keep_going
that is just like keep_going except for the bits that clear the
signal to pass if the signal is set to "handle nopass".
- makes proceed use keep_going too.
- Makes start_step_over use keep_going_pass_signal instead of lower
level displaced stepping things.
One user visible change: if inserting breakpoints while trying to
proceed fails, we now get:
(gdb) si
Warning:
Could not insert hardware watchpoint 7.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
Command aborted.
(gdb)
while before we only saw warnings with no indication that the command
was cancelled:
(gdb) si
Warning:
Could not insert hardware watchpoint 7.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
(gdb)
Tested on x86_64-linux-gnu, ppc64-linux-gnu and s390-linux-gnu.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_info) <prev_pc>: Extend comment.
* infrun.c (struct execution_control_state): Move higher up in the
file.
(reset_ecs): New function.
(start_step_over): Now returns int. Rewrite to use
keep_going_pass_signal instead of manually starting a displaced step.
(resume): Don't call set_running here. If displaced stepping
can't start now, clear trap_expected.
(find_thread_needs_step_over): Delete function.
(proceed): Set up finish_thread_state_cleanup. Call set_running.
If the current thread needs a step over, push it in the step-over
chain. Don't set insert breakpoints nor call resume directly
here. Instead rewrite to use start_step_over and
keep_going_pass_signal.
(finish_step_over): New function.
(handle_signal_stop): Call finish_step_over instead of
start_step_over.
(switch_back_to_stepped_thread): If the event thread needs another
step-over do that first. Use start_step_over.
(keep_going_pass_signal): New function, factored out from ...
(keep_going): ... here.
(_initialize_infrun): Comment moved here.
* thread.c (set_running_thread): New function.
(set_running, finish_thread_state): Use set_running_thread.
In order to teach non-stop mode to do in-line step-overs (pause all
threads, remove breakpoint, single-step, reinsert breakpoint, restart
threads), we'll need to be able to queue in-line step over requests,
much like we queue displaced stepping (out-of-line) requests.
Actually, the queue should be the same -- threads wait for their turn
to step past something (breakpoint, watchpoint), doesn't matter what
technique we end up using when the step over actually starts.
I found that the queue management ends up simpler and more efficient
if embedded in the thread objects themselves. This commit converts
the existing displaced stepping queue to that. Later patches will
make the in-line step-overs code paths use it too.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_info) <step_over_prev,
step_over_next>: New fields.
(thread_step_over_chain_enqueue, thread_step_over_chain_remove)
(thread_step_over_chain_next, thread_is_in_step_over_chain): New
declarations.
* infrun.c (struct displaced_step_request): Delete.
(struct displaced_step_inferior_state) <step_request_queue>:
Delete field.
(displaced_step_prepare): Assert that trap_expected is set. Use
thread_step_over_chain_enqueue. Split starting a new displaced
step to ...
(start_step_over): ... this new function.
(resume): Assert the thread isn't waiting for a step over already.
(proceed): Assert the thread isn't waiting for a step over
already.
(infrun_thread_stop_requested): Adjust to remove threads from the
embedded step-over chain.
(handle_inferior_event) <fork/vfork>: Call start_step_over after
displaced_step_fixup.
(handle_signal_stop): Call start_step_over after
displaced_step_fixup.
* infrun.h (step_over_queue_head): New declaration.
* thread.c (step_over_chain_enqueue, step_over_chain_remove)
(thread_step_over_chain_next, thread_is_in_step_over_chain)
(thread_step_over_chain_enqueue)
(thread_step_over_chain_remove): New functions.
(delete_thread_1): Remove thread from the step-over chain.
I noticed that even though keep_going knows to start a step over for a
watchpoint, thread_still_needs_step_over forgets it.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (thread_still_needs_step_over): Rename to ...
(thread_still_needs_step_over_bp): ... this.
(enum step_over_what): New.
(thread_still_needs_step_over): Reimplement.
Even though "target remote" supports target-async, the all-stop
target_wait implementation ignores TARGET_WNOHANG. If the core
happens to poll for events and we've already read the stop reply out
of the serial/socket, remote_wait_as hangs forever instead of
returning an indication that there are no events to process. This
can't happen currently, but later changes will trigger this.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* remote.c (remote_wait_as): If not waiting for a stop reply,
return TARGET_WAITKIND_NO_RESUMED. If TARGET_WNOHANG is
requested, don't block waiting forever.
Prepare to use it in contexts without an ecs handy. Follow up patches
will make use of this.
gdb/ChangeLog:
2015-08-07 Pedro Alves <pedro@codesourcery.com>
* infrun.c (adjust_pc_after_break): Now takes thread_info and
waitstatus pointers instead of an ecs. Adjust.
(handle_inferior_event): Adjust caller.
Letting a "checkpoint" run to exit with "set non-stop on" behaves
differently compared to the default all-stop mode ("set non-stop
off").
Currently, in non-stop mode:
(gdb) start
Temporary breakpoint 1 at 0x40086b: file src/gdb/testsuite/gdb.base/checkpoint.c, line 28.
Starting program: build/gdb/testsuite/gdb.base/checkpoint
Temporary breakpoint 1, main () at src/gdb/testsuite/gdb.base/checkpoint.c:28
28 char *tmp = &linebuf[0];
(gdb) checkpoint
checkpoint 1: fork returned pid 24948.
(gdb) c
Continuing.
Copy complete.
Deleting copy.
[Inferior 1 (process 24944) exited normally]
[Switching to process 24948]
(gdb) info threads
Id Target Id Frame
1 process 24948 "checkpoint" (running)
No selected thread. See `help thread'.
(gdb) c
The program is not being run.
(gdb)
Two issues above:
1. Thread 1 got stuck in "(running)" state (it isn't really running)
2. While checkpoints try to preserve the illusion that the thread is
still the same when the process exits, GDB switched to "No thread
selected." instead of staying with thread 1 selected.
Problem #1 is caused by handle_inferior_event and normal_stop not
considering that when a
TARGET_WAITKIND_SIGNALLED/TARGET_WAITKIND_EXITED event is reported,
and the inferior is mourned, the target may still have execution.
Problem #2 is caused by the make_cleanup_restore_current_thread
cleanup installed by fetch_inferior_event not being able to find the
original thread 1's ptid in the thread list, thus not being able to
restore thread 1 as selected thread. The fix is to make the cleanup
installed by make_cleanup_restore_current_thread aware of thread ptid
changes, by installing a thread_ptid_changed observer that adjusts the
cleanup's data.
After the patch, we get the same in all-stop and non-stop modes:
(gdb) c
Continuing.
Copy complete.
Deleting copy.
[Inferior 1 (process 25109) exited normally]
[Switching to process 25113]
(gdb) info threads
Id Target Id Frame
* 1 process 25113 "checkpoint" main () at src/gdb/testsuite/gdb.base/checkpoint.c:28
(gdb)
Turns out the whole checkpoints.exp file can run in non-stop mode
unmodified. I thought of moving most of the test file's contents to a
procedure that can be called twice, once in non-stop mode and another
in all-stop mode. But then, the test already takes close to 30
seconds to run on my machine, so I thought it'd be nicer to run
all-stop and non-stop mode in parallel. Thus I added a new
checkpoint-ns.exp file that just appends "set non-stop on" to GDBFLAGS
and sources checkpoint.exp.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* infrun.c (handle_inferior_event): If we get
TARGET_WAITKIND_SIGNALLED or TARGET_WAITKIND_EXITED in non-stop
mode, mark all threads of the exiting process as not-executing.
(normal_stop): If we get TARGET_WAITKIND_SIGNALLED or
TARGET_WAITKIND_EXITED in non-stop mode, finish all threads of the
exiting process, if inferior_ptid still points at a process.
* thread.c (struct current_thread_cleanup) <next>: New field.
(current_thread_cleanup_chain): New global.
(restore_current_thread_ptid_changed): New function.
(restore_current_thread_cleanup_dtor): Remove the cleanup from the
current_thread_cleanup_chain list.
(make_cleanup_restore_current_thread): Add the cleanup data to the
current_thread_cleanup_chain list.
(_initialize_thread): Install restore_current_thread_ptid_changed
as thread_ptid_changed observer.
gdb/testsuite/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.base/checkpoint-ns.exp: New file.
* gdb.base/checkpoint.exp: Pass explicit "checkpoint.c" to
standard_testfile.
On x86-solaris 10, we noticed that starting a program would sometimes
cause the debugger to crash. For instance:
% gdb a
(gdb) break adainit
Breakpoint 1 at 0x8051f03
(gdb) run
Starting program: /[...]/a
[Thread debugging using libthread_db enabled]
zsh: 24398 segmentation fault (core dumped) /[...]/gdb a
The exception occurs in dtrace_process_dof_probe, while trying
to process each probe referenced by a DTRACE_DOF_SECT_TYPE_PROVIDER
DOF section from /lib/libc.so.1. For reference, the ELF section
in that shared library providing the DOF data has the following
characteristics:
Idx Name Size VMA LMA File off Algn
14 .SUNW_dof 0000109d 000b4398 000b4398 000b4398 2**3
CONTENTS, ALLOC, LOAD, READONLY, DATA
The function dtrace_process_dof gets passed the contents of that
ELF section, which allows it to determine the location of the table
where all DOF sections are described. I dumped the contents of
each DOF section as seen by GDB, and it seemed to be plausible,
because the offset of each DOF section was pretty much equal to
the sum of the offset and size of the previous DOF section. Also,
the offset + sum of the last section corresponds to the size of
the .SUNW_dof section.
Things start to break down when processing one of the DOF sections
that has a type of DTRACE_DOF_SECT_TYPE_PROVIDER. It gets the contents
of this DOF section via:
struct dtrace_dof_provider *provider = (struct dtrace_dof_provider *)
DTRACE_DOF_PTR (dof, DOF_UINT (dof, section->dofs_offset));
Said more simply, the struct dtrace_dof_provider data is at
section->dofs_offset of the entire DOF contents. Given that
the contents of SECTION seemed to make sense, so far so good.
However, what SECTION tells us is that our DOF provider section
is 40 bytes long:
(gdb) print *section
$36 = {dofs_type = 15, dofs_align = 4, dofs_flags = 1,
dofs_entsize = 0, dofs_offset = 3264, dofs_size = 40}
^^^^^^^^^^^^^^
But on the other hand:
(gdb) p sizeof (struct dtrace_dof_provider)
$54 = 44
In other words GDB expected a bigger DOF section and when we try to
fetch the value of the last field of that DOF section (dofpv_prenoffs)...
eoffsets_s = DTRACE_DOF_SECT (dof,
DOF_UINT (dof, provider->dofpv_prenoffs));
... we end up reading data that actually belongs to another DOF
section, and therefore irrelevant. This in turn means that the value
of eofftab gets incorrectly set, since it depends on eoffsets_s:
eofftab = DTRACE_DOF_PTR (dof, DOF_UINT (dof, eoffsets_s->dofs_offset));
This invalid address quickly catches up to us when we pass it to
dtrace_process_dof_probe shortly after, where we crash because
we try to subscript it:
Program received signal SIGSEGV, Segmentation fault.
0x08155bba in dtrace_process_dof_probe ([...]) at [...]/dtrace-probe.c:378
378 = ((uint32_t *) eofftab)[...];
This patch fixes the issue by detecting provider DOF sections
that are smaller than expected, and discarding the DOF data.
gdb/ChangeLog:
* dtrace-probe.c (dtrace_process_dof): Ignore the objfile's DOF
data if a DTRACE_DOF_SECT_TYPE_PROVIDER section is found to be
smaller than expected.
The hidden versioned symbol can only be merged with the versioned
symbol with the same symbol version. _bfd_elf_merge_symbol should
check the symbol version before merging the new hidden versioned
symbol with the existing symbol. _bfd_elf_link_hash_copy_indirect can't
copy any references to the hidden versioned symbol. We need to
bind a symbol locally when linking executable if it is locally defined,
hidden versioned, not referenced by shared library and not exported.
bfd/
PR ld/18720
* elflink.c (_bfd_elf_merge_symbol): Add a parameter to indicate
if the new symbol matches the existing one. The new hidden
versioned symbol matches the existing symbol if they have the
same symbol version. Update the existing symbol only if they
match.
(_bfd_elf_add_default_symbol): Update call to
_bfd_elf_merge_symbol.
(_bfd_elf_link_assign_sym_version): Don't set the hidden field
here.
(elf_link_add_object_symbols): Override a definition only if the
new symbol matches the existing one.
(_bfd_elf_link_hash_copy_indirect): Don't copy any references to
the hidden versioned symbol.
(elf_link_output_extsym): Bind a symbol locally when linking
executable if it is locally defined, hidden versioned, not
referenced by shared library and not exported. Turn on
VERSYM_HIDDEN only if the hidden vesioned symbol is defined
locally.
ld/testsuite/
PR ld/18720
* ld-elf/indirect.exp: Run tests for PR ld/18720.
* ld-elf/pr18720.out: New file.
* ld-elf/pr18720a.c: Likewise.
* ld-elf/pr18720b.c: Likewise.
* ld-elf/pr18720c.c: Likewise.
The get_frame_language feels like it would be more at home in frame.c
rather than in stack.c, while the declaration, that is currently in
language.h can be moved into frame.h to match.
A couple of new includes are added, but otherwise no substantial change
here.
gdb/ChangeLog:
* stack.c (get_frame_language): Moved ...
* frame.c (get_frame_language): ... to here.
* language.h (get_frame_language): Declaration moved to frame.h.
* frame.h: Add language.h include, for language enum.
(get_frame_language): Declaration moved from language.h.
* language.c: Add frame.h include.
* top.c: Add frame.h include.
* symtab.h (struct obj_section): Declare.
(struct cmd_list_element): Declare.
As part of a drive to remove deprecated_safe_get_selected_frame, make
the get_frame_language function take a frame parameter. Given the name
of the function this actually seems to make a lot of sense.
The task of fetching a suitable frame is then passed to the calling
functions. For get_frame_language there are not many callers, these are
updated to get the selected frame in a suitable way.
gdb/ChangeLog:
* language.c (show_language_command): Find selected frame before
asking for the language of that frame.
(set_language_command): Likewise.
* language.h (get_frame_language): Add frame parameter.
* stack.c (get_frame_language): Add frame parameter, assert
parameter is not NULL, update comment and reindent.
* top.c (check_frame_language_change): Pass the selected frame
into get_frame_language.
