including support for Motorola syntax.
* config/m68k-parse.h: New file; definitions shared between
m68k-parse.y and tc-m68k.c.
* config/tc-m68k.c: Include m68k-parse.h.
(enum operand_type): Move to m68k-parse.h, where it is named
m68k_operand_type. Rename all uses. Rearrange somewhat. Add
FPREG. Rename AOFF to DISP. Rename AINDX to BASE. Rename APODX
to POST. Rename APRDX to PRE. Remove AMIND. Rename MSCR to
CONTROL. Remove DINDR.
(struct m68k_exp): Move to m68k-parse.h. Remove e_beg, e_end and
e_seg fields. Rename e_exp to exp. Rename e_siz to size, and
change type to enum m68k_size. Change all uses.
(enum _register): Move to m68k-parse.h, where it is named
m68k_register. Rename all uses. Add ZDATA0-7 and ZADDR0-7.
(struct m68k_op): Move to m68k-parse.h. Change all fields.
(seg): Don't define.
(add_exp): Remove.
(FAIL, OK): Remove.
(m68k_reg_parse): Move to m68k-parse.y, and rewrite.
(SKIP_WHITE, SKIP_W): Remove.
(try_moto_index, try_index): Remove.
(m68k_ip_op): Move to m68k-parse.y, and rewrite to use grammar.
(main): Remove obsolete test function.
(m68k_ip): Extensive changes to use new grammar.
(get_regs): Remove.
(crack_operand): m68k_ip_op now returns 0 on success.
(init_table): Add ssp, zd0-7 and za0-7.
(md_assemble): Make er const. Correct loop over operands when
looking for error message.
(md_begin): Set alt_notend_table for '(' and '@'.
(get_num): Expression is already parsed. Don't set seg.
* configure.in: If cpu_type is m68k, put m68k-parse.o in
extra-objects.
* configure: Rebuild.
* Makefile.in (DISTSTUFF): Add m68k-parse.c.
(BISON): Use ../bison/bison if it exists.
(BISONFLAGS): Define as empty.
(TARG_CPU_DEP_m68k): Depend upon $(srcdir)/config/m68k-parse.h.
(m68k-parse.c, m68k-parse.o): New targets.
Initial support for PE object files.
* configure.in, configure (i386-*-pe, i386-*-*nt): Add.
* config/obj-coff.c (fixup_segment): Cope with PE wierdness.
* config/obj-coff.h (TE_PE): New target format.
with native MIPS assembler.
* configure.in (mips-*-irix*): Don't set emulation.
* config/te-irix.h: Remove.
With these changes, gas works with mips-tfile.
Still to do:
- fix floating-point handling
- figure out if we can adapt to using ../opcodes/alpha-opc.h
- gcc bootstrap testing
- 32-bit mode support?
- test cross-assembly
* config/tc-mips.c: Include opcode/mips.h rather than
mips-opcode.h.
(append_insn): An extra NOP is only needed after instructions
which set HI or LO, not after instructions which read it.
(macro_build, mips_ip): Support new 'E', 'G' and 'B' arguments.
(macro): cfc1 and ctc1 now take "t,G" rather than "t,d".
* config/tc-mips.h (struct mips_opcode): Don't define.
* config/mips-big.mt, config/mips-lit.mt (TARG_CPU_DEPENDENTS):
Set to $(srcdir)/../include/opcode/mips.h.
Get the MIPS assembler up to speed with other gas changes:
* config/obj-ecoff.c (ecoff_set_vma, ecoff_frob_symbol):
Removed; don't change the symbol value.
(ecoff_build_symbols, ecoff_build_procs, ecoff_frob_file): Use
bfd_asymbol_value rather than S_GET_VALUE to include section
vma in symbol value.
(ecoff_frob_file): Ignore BSF_SECTION_SYM symbols, since ECOFF
doesn't output them. Set the vma of sections.
* config/obj-ecoff.h: Don't define obj_frob_symbol.
* config/tc-mips.c (tc_gen_reloc): Adjustment by section vma is no
longer necessary.
(various): use valueT rather than long.
* app.c, config/tc-*.c: Don't include read.h, since it is already
included by as.h.
* These are based on patches from Minh Tran-le
<mtranle@paris.intellicorp.com>.
* configure.in (i[34]86-ibm-aix*): Accept i486 for host. Use
obj_format coffbfd and gas_target i386coff for target.
(i[34]86-*-isc*): New host (uses sysv).
* config/i386aix.mt: Removed (no longer used).
* config/mh-i386aix (RANLIB): Use true rather than /bin/true.
(MINUS_G): Removed.
(LDFLAGS): Added, defined as -shlib.
* config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
* config/te-sco386.h (LOCAL_LABEL): Don't define.
(DOT_LABEL_PREFIX): Define.
* expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
name rather than L0\001.
* read.c (s_lcomm): Make a frag in SEG_BSS rather than using
local_bss_counter.
* symbols.c, symbols.h (local_bss_counter): Removed.
* write.c (write_object_file): bss no longer uses
local_bss_counter. Pass correct data and bss size to
VMS_write_object_file.
* config/obj-vms.c (VMS_write_object_file): Accept bss size as
argument, rather than using local_bss_counter.
* config/tc-m88k.c (s_bss): Don't use local_bss_counter.
* config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
* config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
(size_section): Restored sanity check.
(do_relocs_for): Base section address on s_paddr rather than
computing it. Adjust a29k R_IHIHALF special case to account for
section paddr (used to require paddr to be zero). If there are no
reclos, set s_relptr to 0. Set relocation size in object_headers.
(fill_section): Always set s_vaddr here, removing
ZERO_BASED_SEGMENTS case. Force s_scnptr for bss to 0. Don't set
NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
Set STYP_INFO for .comment.
(coff_header_append): Use object headers and H_{SET,GET}_* macros.
Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
(crawl_symbols): Handle 8 character section name correctly. Use
H_{SET,GET}_* macros.
(do_linenos_for): Set lineno size in object_headers.
(write_object_file): Use H_{SET,GET}_* macros. Don't bother to
set s_vaddr here. If string_byte_count remains 4, set it back to
0, and only write strings out if there are some. Call
fill_section before do_relocs_for and do_linenos_for.
(obj_coff_section): Handle optional quoted second argument giving
section characteristics.
(obj_coff_bss): Added to handle .bss.
(obj_coff_ident): Added to handle .ident (puts string in .comment
section).
(obj_coff_lcomm): Put common symbols in .bss, not .data.
(fixup_mdeps): Change to segment. Call frag_wane after
md_convert_frag.
(fixup_segment): Explicitly check S_IS_COMMON before making 386
adjustment (already happened only for common symbols, but this is
clearer).
* config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
* config/tc-i386.c (s_bss): Don't use if I386COFF.
(md_pseudo_table): Ignore .optim and .noopt.
(tc_coff_sizemachdep): New function.
* config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
compatibility.
(LOCAL_LABEL): Removed definition.
(DOT_LABEL_PREFIX): Defined.
* tc-m68k.c (m68k_ip, m68k_ip_op, get_num, try_moto_index): merge
Motorola and MIT syntax; gas can now assemble either type of
file.
tc-m68kmote.c, tc-m68kmote.h: removed now superfluous files.
From Steve Chamberlain:
m68kcoff.mt: for m68k COFF.
obj-coffbfd.c: (fixup_mdeps) added
(size_section) removed bad sanity check
(fill_section) added rs_machine_dependent case
(write_object_file) call fixup_mdeps
(fixup_segment) set fx_subsy to 0.
obj-coffbfd.h: define WORKING_DOT_WORD (too hard to support) and
handle m68k.
tc-m68k.c, config/tc-m68k.h: added m68k COFF support and Motorala
pseudo ops.
