we have a current_source_symtab, and s is NULL, return without
doing anything.
xcoffread.c (xcoff_symfile_read): Don't call select_source_symtab.
breakpoint.c (breakpoint_re_set): Don't call select_source_symtab.
member functions to avoid gdb core dumps when printing pointers
to member functions.
* cp-valprint.c (cp_print_class_method): Check for stubbed member
functions.
(putpkt, getpkt): Use new return codes for SERIAL_READCHAR.
* ser-go32.c: Return -1 on most failures, 0 on most successes,
and use new return codes for go32_readchar().
* ser-unix.c: Ditto. Also, move error handling up to caller for
SERIAL_SETBAUDRATE().
* serial.c (serial_open): Internal call, not SERIAL_OPEN to get
to specific routine.
(serial_close): New routine to wrap around device close routine.
serial.h: Clean & document return values more clearly.
(solib_map_sections): Leave bfd open and scratch_pathname allocated.
Put the bfd in bfd field of the so_list.
(clear_solib): Free bfd name and close_bfd on the bfd.
Remove bpstat_momentary_breakpoint. This was always kludgy
and is no longer used.
* breakpoint.h: Add enum bpstat_what.
breakpoint.h (struct bpstat), breakpoint.c (bpstat_stop_status):
stop and print fields of bpstat now per-breakpoint, not just
one for the whole chain.
breakpoint.{c,h} (bpstat_what): New function.
breakpoint.h: Remove bpstat_stop and bpstat_should_print.
infrun.c: Replace switch (stop_bpstat->breakpoint_at->type)
with call to bpstat_what.
README: Remove watchpoint/breakpoint bug from known bugs.
* breakpoint.h: Prototype bpstat_find_breakpoint.
is a C++ destructor.
* symtab.c (gdb_mangle_name): Use it.
* symtab.c (find_methods): Do not add destructors to choice list
for constructors.
* symtab.c (decode_line_1): Make breakpoints on destructors work
for gcc-2.x again.
UNOP_IND, UNOP_CAST, UNOP_ADDR, STRUCOP_STRUCT, OP_TYPE.
* ch-typeprint.c (chill_print_type): Move support
for TYPE_CODE_ARRAY and TYPE_CODE_STRING from here ...
* ch-typeprint.c (chill_type_print_base): ... here.
* ch-typeprint.c (chill_type_print_base): Improve
support for PTR, REF, and FUNC types.
* ch-valprint.c: Prefer H'%x format to 0x%s.
* ch-valprint.c (chill_val_print): Add support for printing
TYPE_CODE_REF (return for LOC parameters and variables).
Use c_val_print to print random types (including ENUM).
* ch-valprint,c (chill_print_value_fields): Make
output look more like Chill tuples.
* stabsread.c (read_struct_type): Factor common code.
own tm- & .mt files now. Also add sparclite to configdirs.
* go32-xdep.c: Dummy routines for sigsetmask & strlwr.
* config/i386/go32.mh: Nullify def of TERMCAP.
* config/i386/xm-go32.h: Get rid of redef of EIO.
* config/sparc/{sparclite.mh tm-sparclite.h}: New sparclite
specific configs. Very similar to sun4os4, but without solib.
* sparclite/{Makefile.in configure.in}: First cut at making this
dir configgable.
These implement a new serial line interface for talking to remote
targets.
* configure.in: Link ser-hardwire.c to ser-unix.c for all hosts,
EXCEPT go32, which gets ser-go32.c.
* remote.c: Use new serial interface. More remote-xxx's to be
converted later.
* ser-bsd.c, ser-termios.c: Removed.
* serial.c: New. Implements common operations for all serial
types.
* ser-unix.c: New. Unix specific serial operations for various
flavors of Unix (Posix, SysV, BSD).
* serial.h: Generic serial interface defs.
* config/i386/go32.mh, config/i386/i386bsd.h,
config/m68k/apollo68b.mh, config/sparc/sun4os4.mh: Remove
ser-bsd.o from XDEPFILES. All the magic is now handled in
configure.in.
entire breakpoint chain and print only the first entry that needs to
be printed and needs to be stopped for. Fixes problems with printing
of multiple breakpoints with different conditions.
* breakpoint.c (print_it_done): Renamed from print_it_noop as it
effectively stops printing of the breakpoint chain.
* breakpoint.c (print_it_noop): New routine to print nothing
for this breakpoint entry and dont stop printing.
* breakpoint.c (breakpoint_re_set_one): mention the reevaluated
watchpoint only if it is enabled.
* mipsread.c (parse_procedure): Correct incorrect setjmp procedure
descriptor from the library to make backtraces through setjmp work.
* mipsread.c (fixup_sigtramp): Correct pcreg and fregoffset for
sigtramp.
* mips-tdep.c (read_next_frame_reg): Provide correct values for
all registers saved within sigtramp, cleanup.
* solib.[hc] (find_pc_section_from_so_list): new function and
prototype.
* sparc-tdep.c (in_solib_trampoline): new function.
* symfile.[hc] (find_pc_section): new function and prototypes.
* target.[hc] (find_pc_section_from_targets): new function and
prototypes.
* config/sparc/tm-sun4sol2.h (IN_SOLIB_TRAMPOLINE): redefine to
in_solib_trampoline.
* command.c (do_setshow_command): Use %u with var_{u,z}integer.
* command.{c,h}: New var_type var_integer.
main.c: Use it for history_size.
* rs6000-tdep.c, xcoffexec.c, config/rs6000/xm-rs6000.h, breakpoint.c:
Lint and byte-order fixups.
breakpoint.c (bpstat_print): Use it.
(print_it_normal): New function (from old bpstat_print code).
(bpstat_{alloc,stop_status}): Set print_it field.
* breakpoint.c (bpstat_stop_status): Use catch_errors when
evaluating watchpoint condition, via new function watchpoint_check.
Also stop if watchpoint disabled due to leaving its block.
* breakpoint.c (enable_breakpoint): Don't enable watchpoint if it
went out of scope.
* exec.c (exec_close): Fix storage leak.
* exec.c (exec_file_command): Make sure that bfd doesn't realign the
output sections when patching an executable.
* mips-nat.c (store_inferior_registers): Use REGISTER_PTRACE_ADDR
when writing all registers.
* mips-tdep.c (mips_push_dummy_frame): Save floating point registers
at the right offset in the dummy frame.
* mipsread.c (psymtab_to_symtab_1): Do not complain for stProc,
stStaticProc and stEnd symbols as they are generated by gcc-2.x.
* mipsread.c (mipscoff_new_init): Initialize stabsread and buildsym.
of reading/writing registers that are shorter than REGISTER_TYPE.
* (value_from_register): Install H8500 specific code to return
proper value when register is being used as a pointer.
* h8500-tdep.c: Remove extra defines of NUM_REGS.
(h8500_skip_prologue): Use correct lengths for LINK instructions.
(FRAME_CHAIN): Change name to h8500_frame_chain. Rewrite code to
chain frames properly by combining frame pointer with T reg.
(init_extra_frame_info): Delete. It's now a macro.
(frame_args_address): Don't add PTR_SIZE. Stack args are already
offset by the correct amount off of the frame pointer.
(register_byte): Delete. It's now a macro.
(register_raw_size, register_virtual_size): Delete. Replaced by
common routine h8500_register_size, cuz there's no difference
between the raw & virtual sizes on this machine.
(register_convert_to_raw, register_convert_to_virtual): Delete,
cuz there's no difference between the raw & virtual forms.
Replaced by memcpy in tm file.
(register_virtual_type): Rename to h8500_register_virtual_type.
Get rid of pointer pseudo-regs, use _REGNUM with all reg names.
(_initialize_h8500_tdep): Get rid of crock to ensure that GDB &
emulator have same reg offsets. This is all handled in the
simulator code now.
(h8500_trapped_internalvar): New routine to detect references to
convenience vars acting as pointer pseudo-regs.
(h8500_value_trapped_internalvar): Conjure up value of pointer
pseudo-regs.
(h8500_set_trapped_internalvar): Convert set value in real
register references.
infcmd.c (read_pc, write_pc): Add h8500 specific code to handle
code segment register.
infrun.c (proceed): Simplify. Call write_pc instead of doing it
by hand.
(wait_for_inferior): Add h8500 specific code to add stack segment
when reading SP register.
remote-sim.c (fetch_register): Spacing.
tm-h8500.h: #define GDB_TARGET_IS_H8500 to make it easier to
detect cruft. Redo all register manipulation stuff. Get rid of
pointer pseudo-regs. (INIT_EXTRA_FRAME_INFO): Adds stack segment
to frame pointer. (IS_TRAPPED_INTERNALVAL,
VALUE_OF_TRAPPED_INTERNALVAR, SET_TRAPPED_INTERNALVAR): Use these
to create internal vars for pointer pseudo-regs.
m88k, mips, none, ns32k, pa, pyr, romp, rs6000, sparc, tahoe, vax,
z8k}: New directories to hold cpu specific configuration files.
Naming follows gcc convention.
* config/{*.mt, *.mh}: All target and host makefile fragment
config files moved to an appropriate config/<cpu> subdirectory.
* nm-*, xm-*, tm-*: All native, host, and target files, which
get linked to nm.h, xm.h, and tm.h respectively by configure,
moved to appropriate config/<cpu> subdirectory.
* nm-sysv4.h, xm-sysv4.h, tm-sysv4.h, tm-sunos.h, nm-trash.h:
Native, host, and target files that are common across more than
one cpu architecture and included by one of the configured
native, host, or target files, get moved to config directory.
* Makefile.in (INCLUDE_CFLAGS): Add -I${srcdir}/config to
pick up native, host, or target include files moved to one of
the config subdirectories, and that are included by other files.
* Makefile.in (alldeps.mak): Modify to account for new config
directory structure.
* alldeps.mak, depend: Update for new config directory structure.
* config/*/[ntx]m-*.h: Modify all files that include other
[ntx]m-*.h files to use path relative to gdb/config. I.E.
"a29k/tm-ultra3.h" includes "a29k/tm-29k.h" rather than just
"tm-29k.h".
* remote-eb.c (tm-29k.h): Include a29k/tm-29k.h.
* mipsread.c (tm-mips.h): Include mips/tm-mips.h.
* i860-pinsn.c (tm-i860.h): Include i860/tm-i860.h.
* configure.in: Default gdb_host_cpu to host_cpu, and remap
the ones where the default is not unique or different than the
config subdirectory name. Similarly, handle gdb_target_cpu.
Modify configure.in as appropriate to make use of gdb_host_cpu
and gdb_target_cpu to find makefile fragments and make links.
* ieee-float.h: Moved to ../include.
* Makefile.in: Update accordingly.
* i386-pinsn.c (print_insn), m68k-pinsn.c (print_insn):
Convert to stubs that call disassemblers in ../opcodes/*-dis.c.
* m68k-tdep.c: Removed definition of ext_format ext_format_68881;
it is now in ../opcodes/m68881-ext.c.
* mips-tdep.c (mips_skip_prologue): Try to skip more of the
prologue (some callers _do_ care).
* mips-pinsn.c (print_insn), z8k-tdep.c (print_insn): Convert to
new interface of ../opcodes/*-dis.c.
* ch-exp.y: Add #include <ctype.h>.
fix problem with coercion of array and function types when
passed as arguments to C functions, pending a more complete
review of when and how coercion should be done, depending
upon context and language.
This is defined in defs.h if necessary.
* vx-share/vxWorks.h: Remove #defs of min and max.
* vx-share/xdr_ld.c, vx-share/xdr_ptrace.c,
vx-share/xdr_rdb.c: include defs.h.