* configure.in (configdirs): Force 4100 builds to use 4300 GDB
target.
* configure: Rebuild.
* config/mips/vr4300el.mt (SIM_OBS): Include simulator in
little-endian builds.
* NEWS: Add Alpha Linux as a new native configuration.
* mdebugread.c (parse_symbol): When we find a malloc() symbol with
return type VOID, assume no debugging info is available for that
object file and patch the return value into VOID *. Otherwise,
operations requiring an implicit call to malloc() will fail.
* infrun.c (wait_for_inferior): The criterion to detect entering a
sigtramp handler is now: (a) the current pc is inside a sigtramp
handler, (b) the previous pc is not in a sigtramp handler, and (c)
the current stack pointer is "inner" than the old one. Condition
(c) is new to avoid mistaking a return from a signal handler into
sigtramp as a new sigtramp invocation.
* dcache.c (struct dcache_block): Declare addr as CORE_ADDR. An
int may not be big enough to hold an address.
(dcache_hit): Ditto.
(dcache_peek_byte): Fix indentation.
* configure.in (alpha-*-linux*): Add target.
* configure: Rebuild
* config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro.
(SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto.
(DYNAMIC_SIGTRAMP_OFFSET): Ditto.
(SIGCONTEXT_ADDR): Ditto.
(FRAME_PAST_SIGTRAMP_FRAME): Ditto.
* config/alpha/alpha-linux.mh: New file.
* config/alpha/alpha-linux.mt: Ditto.
* config/alpha/nm-linux.h: Ditto.
* config/alpha/tm-alphalinux.h: Ditto.
* config/alpha/xm-alphalinux.h: Ditto.
* config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h.
* config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to
xm-alphaosf.h.
* config/alpha/alpha-osf2.mh: Ditto.
* blockframe.c (find_pc_partial_function): Pass PC to
SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems
that detect sigtramp code via designated code sequences (as is the
case for Linux/Alpha, for example).
* config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END
to ignore new PC argument.
* config/m68k/tm-hp300bsd.h: Ditto.
* config/vax/tm-vax.h: Ditto.
* alpha-tdep.c (alpha_linux_sigtramp_offset): New function.
(alpha_osf_skip_sigtramp_frame): Ditto.
(push_sigtramp_desc): Ditto.
(alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract
sigcontext address from frame.
(alpha_saved_pc_after_call): When in sigtramp, use
alpha_frame_saved_pc() instead of read-register().
(after_prologue): When inside a dynamically generated sigtramp
function, there is no prologue, so return address of first
instruction.
(alpha_in_prologue): Fix typo in comment.
(find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine
whether we're inside a dynamicaly generated sigtramp function. If
so, create and push and appropriate procedure descriptor.
(alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain
the frame past a sigtramp frame (if the current frame is indeed a
sigtramp function).
(init_extra_frame_info): Don't read next frame register off of
stack-pointer when inside a dynamiccaly generated sigtramp.
(alpha_pop_frame): Also unlink and destroy procedure descriptors
created for dynamically generated sigtramp functions.
* alpha-nat.c: When compiling under Linux, include <asm/reg.h> and
<alpha/ptrace.h> instead of <machine/reg.h>
(IS_MOVE_FP, IS_MOV_SP_FP): Accept H8/300H varaints.
(IS_SUB4_SP, IS_SUBL_SP): New macros.
(h8300_skip_prologue): Handle H8/300H prologue code sequences.
(examine_prologue): Handle addresses from 0x010000 to 0xffffff
when in H8/300H mode. Get the return pointer's address correctly
for the H8/300H. Handle H8/300H prolouge code sequences.
Avoiding major breakage on the H8/300H, and on the eval board. Jeez, did
anyone even try to debug H8/300H code with gdb in the past?!?
attempting to regenerate it. Eliminate use of a temporary file
and just generate the info file directly. Source it immediately,
for consistency of use.
* gdb.base/corefile.exp: Ditto
* gdb.base/exprs.exp: Ditto.
* gdb.base/funcargs.exp: Ditto.
* gdb.base/langs.exp: Ditto.
* gdb.base/list.exp: Ditto.
* gdb.base/mips_pro.exp: Ditto.
* gdb.base/nodebug.exp: Ditto.
* gdb.base/opaque.exp: Ditto.
* gdb.base/ptype.exp: Ditto.
* gdb.base/scope.exp: Ditto.
* gdb.base/setvar.exp: Ditto.
* gdb.base/signals.exp: Ditto.
* gdb.base/whatis.exp: Ditto.
* gdb.c++/templates.exp: Ditto.
* gdb.c++/virtfunc.exp: Ditto.
* gdb.c++/virtfunc.exp: Use contents of gcc_compiled to decide
whether or not to add -lstdc++ to the compile command line args.
like EST visionICE that send back an ACK after each S-record.
* monitor.c (monitor_wait_srec_ack): New function.
(monitor_load): Pass monitor_wait_srec_ack to load_srec
if the monitor's MO_SREC_ACK flag is set.
* monitor.h: Define MO_SREC_ACK flag.
* remote-est.c (est_cmds): Add MO_SREC_ACK flag.
* sh3-rom.c (sh3_load): Accomodate change in load_srec prototype.
* srec.h: Add WAITACK parameter to load_srec prototype.
(readline_begin_hook, readline_hook, readline_end_hook): Declare.
* breakpoint.c (commands_command): Build message in temporary buffer
and pass that, as well as tty control flag, to read_command_lines.
* top.c (readline_begin_hook, readline_hook, readline_end_hook):
Define here.
(command_loop): Check for non-NULL instream before looping.
(command_line_input): Use readline_hook when appropriate, to get
user input from a GUI window.
(read_next_line): Also build prompt if getting user input from a GUI.
(recurse_read_control_structure): Fix typo in comment.
(read_command_lines): Use passed in prompt and tty flag to decide how
to build message. Use readline_begin_hook when appropriate, to set
up a GUI interaction window. Just return head, whether NULL or not,
after using readline_end_hook to complete GUI interaction.
(define_command, document_command): Build message in a temporary
buffer and pass it to read_command_lines, along with tty flag.
* gdbtk.c (gdbtk_readline_begin, gdbtk_readline, gdbtk_readline_end):
New functions.
(tk_command_loop): Set instream to NULL to enable Tk user interaction.
(gdbtk_init): Set readline_begin_hook, readline_hook,
and readline_end_hook.
* gdbtk.tcl (gdbtk_tcl_readline_begin, gdbtk_tcl_readline,
gdbtk_tcl_readline_end): New functions.
(tclsh): Pack scroll bar on right side of window, not left.
PR 9385
Add FUNCTION_START_OFFSET only if func_start is non-zero.
* minsyms.c (lookup_minimal_symbol_by_pc): Return NULL if
pc is not in a known section.
* stack.c (print_frame_info): Remove check for fi->pc in known
section, now handled by lookup_minimal_symbol_by_pc.
(create_command_window): Use gdb_prompt rather than "(gdb) ".
(gdbtk_tcl_preloop): Proc executed just prior to Tk main loop.
(tclsh): If an evaluation window already exists, just bring it
to the front instead of trying to create another.
* gdbtk.c (tk_command_loop): New function.
(gdbtk_init): Call tk_command_loop rather than Tk_MainLoop.
break.c.
* gdb.base/callfuncs.exp: Don't run these tests on the h8300.
* gdb.base/default.exp: Add h8300 xfails. Handle messages
from remote-sim.
* gdb.base/exprs.exp: Add h8300 xfails.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/printcmds.exp: Likewise.
* gdb.base/ptype.exp: Likewise.
* gdb.base/setvar.exp: Handle sizeof (int) != 4 for h8300. Add
h8300 xfails.
* gdb.base/return.exp: Handle float/double precision problems
on the h8300.
* gdb.base/funcargs.c: Explicitly make last constant argument to
call_after_alloca_subr an unsigned long type.
* gdb.base/return.c: Include stdio.h.
Testsuite work for the H8/300 -gstabs. HMSE.
C_STAT symbols.
* h8300-tdep.c (h8300_pop_frame): Reset $sp and $pc correctly.
Flush cached frames just before exiting.
* remote-sim.c (gdbsim_resume): Complain if the program isn't
being run.
* config/h8300/tm-h8300.h (BELIEVE_PCC_PROMOTION): Define.
Fix some bugs exposed by the testsuite. HMSE.
* (procfs_pid_to_str): New routine to print out thread id's in an
intelligible manner.
* sol-thread.c (sol_thread_fetch_registers): Re-order manner in
which supply_register is called to fix bug with writing writing
individual regs.
* config/sparc/tm-sun4sol2.h: Define default for
target_pid_to_str in case host lacks libthread_db.
config/sparc/nm-sun4sol2.h config/sparc/sun4sol2.mh
config/sparc/tm-sun4sol2.h: Use autoconf to config Solaris thread
and pthread support, since pre-2.5 systems don't come with
libthread_db.so.1.
* procfs.c (info_proc): Use int instead of id_t. Old versions of
Irix don't see to define this.
* (sol_thread_resume): Prevent people from trying to step
inactive threads.
* (sol_thread_wait sol_thread_fetch_registers
sol_thread_store_registers): Remove unnecessary check for
sol_thread_active. These routines won't get called unless threads
are active.
Print out messages instead of codes for thread_db errors. Make
access macros for thread and lwp manipulation. Make cleanups to
fixup inferior_pid in case of errors.
infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c,
win32-nat.c, config/nm-lynx.h: Rename thread.h to gdbthread.h to
avoid conflict with Solaris /usr/include/thread.h.
that is referenced nowhere else.
(set_breakpoint): Ditto.
(do_enable_breakpoint): Created from enable_once_breakpoint
with a couple of changes.
(enable_breakpoint): Call do_enable_breakpoint with an appropriate
bpdisp enum value to set disposition of breakpoint.
(enable_once_breakpoint): Ditto.
(enable_delete_breakpoint): Ditto.
* breakpoint.h (clear_momentary_breakpoints): Remove prototype.
* symtab.c (find_pc_line): Improve comments.
* gdbtk.c: Fix a couple of misspellings.
* xcoffread.c: Ditto.
returns a possibly modified pid.
* inftarg.c (ptrace_him): Now returns pid;
* m3-nat.c (m3_trace_him): Now returns pid;
* infcmd.c (run_command): Minor cleanup.
* infrun.c (wait_for_inferior): Add another check for one_stepped
near where we read the pc to avoid erroneously setting
random_signal for multi-threaded support.
* procfs.c: Add support for Solaris LWPs. Remove def of
LOSING_POLL. Many cleanups... Several workarounds for Solaris
lossage. System call entry and exit are now handled by
dynamically registered handlers.
* (syscallname): Don't barf when handed an unknown syscall
number.
* (info_proc_syscalls): Ditto.
* sol-thread.c: New file. Implements Solaris thread support.
* symfile.c (symbol_file_add): Add call to target_new_objfile to
notify target-dependent code about new symbol tables.
* (clear_symtab_users): Call target_new_objfile to notify it of
the removal of all symbol tables.
* target.c (push_target): Make sure that to_close is non-zero
before calling it.
* target.h (target_new_objfile): Provide default.
* config/alpha/nm-osf2.h: Define LOSING_POLL because this version
of OSF can't hack using poll with /proc.
* config/sparc/nm-sun4sol2.h (target_new_objfile): Define to be
sol-thread-new-objfile.
* config/sparc/sun4sol2.mh: Add sol-thread.o to NATDEFFILES, and
add libthread_db.so.1 to NAT_CLIBS.
* config/sparc/tm-sun4sol2.h: Define PIDGET, TIDGET, and
target_pid_to_str.
(insert_breakpoint_tag, delete_breakpoint_tag): Fix range.
(file_popup_menu): Delete, never used.
(listing_window_popup): Rename from listing_window_button_1,
remove breakpoint toggling code.
(toggle_breakpoint): New procedure.
(create_file_win): Bind popup menu to button 2, toggle breakpoints
with button 1 in breakpoint area, add display of tagged areas if
debugging on.
* breakpoint.h (enum bpdisp): Add del_at_next_stop.
* breakpoint.c (insert_breakpoints, watchpoint_check,
bpstat_stop_status): Avoid bad references to memory freed via
delete_breakpoint on watchpoints going out of scope.
Do not delete these watchpoints, disable them and change their
disposition to del_at_next_stop instead.
(breakpoint_auto_delete): Delete all breakpoints whose disposition
is del_at_next_stop.
(breakpoint_init_inferior): Use switch to avoid reference to
already deleted breakpoint.
Fixes dangling pointer problems with watchpoints.
* config/rs6000/rs6000.mh (NATDEPFILES): Move xcoffread.o ...
* config/rs6000/rs6000.mt (TDEPFILES): ... to here
* xcoffsolib.c (xcoff_relocate_symtab_hook): Define and initialize.
(solib_info): Call xcoff_relocate_symtab via the hook.
(sharedlibrary_command): Ditto.
* xcoffread.c: Remove all FAKING_RS6000 comments and defines.
(xcoff_add_toc_to_loadinfo_hook): Define and initialize here.
(xcoff_init_loadinfo_hook): Define and initialize here.
(scan_xcoff_symtab): Call xcoff_add_toc_to_loadinfo via the hook.
(xcoff_initial_scan): Call xcoff_init_loadinfo via the hook.
* xcoffsolib.h (xcoff_relocate_symtab_hook): Declare extern func.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add initializations
of xcoff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook.
* rs6000-nat.c (_initialize_core_rs6000): Add initialization
of xcoff_relocate_symtab_hook.
(mon960_load): Use current_monitor instead of mon960_cmds.
(mon960_regnames): Remove backslashes from line ends.
(_initialize_mon960): Fix documentation string.
storage leaks.
(breakpoint_re_set_one): Fix b->exp, b->val, b->cond storage leaks.
* infcmd.c (run_command), solib.c (locate_base): Check for
target_has_execution in addition to inferior_pid, a core file
from a threaded program is yielding a non-zero inferior_pid.
* sparc-tdep.c (get_saved_register): Handle window registers
in a dummy frame correctly.
so that anything that wants an allocation function not yet pulled
in, will get it from mmalloc rather than a system library.
* Makefile.in (INSTALLED_LIBS): Reorder to match order of CLIBS,
to avoid surprising results when used.
Fix bug for class data members.
Fix parsing bug when no base classes exist.
Fix memory bug - allocate space for cplusplus specific info.
Add support for static data.
Add prototypes for static functions.
Enhance comments to show what each function expects to parse.
Cleanup code.
* stabsread.c(resolve_cont),dbxread.c(resolve_cont): Rename
function to resolve_cfront_continuation.
outside of #ifdef conditionals. Don't trash the wait status
if we get a signal and the current instruction is nullified.
Fixes long standing problem on the PA (spurious SIGTRAPs)..
hooks.
(call_extra_exec_file_hooks): New function.
* h8300-tdep.c: Lint; add .h files to provide missing declarations,
remove unused variables.
(set_machine_hook): New function.
(_initialize_h8300m): Initialize it.
PR 8849.
before de-referencing it. Prevents deref of NULL pointer if core
file lacks .reg section.
* defs.h: Rename floatformat_{to from}_long_double to
floatformat_{to from}_doublest. Get rid of FLOATFORMAT_{TO
FROM}... macros.
* findvar.c (extract_floating store_floating): Change all refs to
FLOATFORMAT_{FROM TO}... to floatformat_{from to}_doublest.
* utils.c: Change floatformat_{to from}_long_double to
floatformat_{to from}_doublest cuz the new routines will use
whatever size (double or long double) is appropriate.
* config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL
REGISTER_CONVERT_TO_RAW): Change FLOATFORMAT... macros to
floatformat... routine calls.
number handling to handling of types proper (as emitted by gcc!).
For typedefs, allocate the typedef type before reading its
definition, to properly handling recursive types.
This fixes PR 9434.
user can attach to a previously running program.
* (nindy_fetch_registers nindy_store_registers): Get rid of fp
conversion code. That's all handled in {extract store}_floating
now.
* utils.c (floatformat_to_double): Don't bias exponent when
handling zero's, denorms or NaNs.
* config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL
REGISTER_CONVERT_TO_RAW): Change to using DOUBLST and
FLOATFORMAT_TO/FROM_DOUBLEST macros.
* config/i960/tm-nindy960.h: Undefine
REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, and
REGISTER_CONVERTIBLE. These are no longer necessary now that all
the magic happens in extract/store_floating.
evaluate subscripts for types which cannot be subscripted.
* valarith.c (value_x_binop, value_x_unop): Add noside parameter.
Return a zero value with the return type of the member function
if noside is EVAL_AVOID_SIDE_EFFECTS instead of calling the member
function.
* values.h (value_x_binop, value_x_unop): Update prototypes
accordingly.
* eval.c (evaluate_subexp_standard): Update all callers of
value_x_binop, value_x_unop accordingly.
* valarith.c (value_neg, value_complement): Perform ANSI C/C++
integral promotion on operands.
* configure.in (AC_CHECK_FUNCS): Also check for sbrk.
* configure: Regenerate with autoconf.
* config.in: Regenerate with autoheader.
* main.c (main): Only use sbrk() when HAVE_SBRK is defined.
* top.c (command_loop): Ditto.
defaults for bi-endian targets. Replace function pointers for
floatformat routines with macros. No need for these to be runtime
selectable.
* findvar.c: Get rid of floatformat function pointers. Use
macros in extract_floating and store_floating.
* remote-nindy.c (nindy_fetch_registers nindy_store_registers):
Use floatformat macros.
* configure.in (AC_CHECK_HEADERS): check for endian.h.
Use AC_CHECK_TOOL to find AR & RANLIB. Add AC_PROG_AWK.
Add host & target cases for i[345]86-*-gnu*.
* config.in: Regenerate with autoheader.
* configure: Regenerate with autoconf.
* Makefile.in (AR, AWK): Set from corresponding autoconf substs.
(init.c): Don't scan mig-generated files.
* defs.h (endian.h): Include if HAVE_ENDIAN_H defined.
* config/nm-m3.h (ATTACH_NO_WAIT): Define.
* infcmd.c (attach_command): Use "#ifndef ATTACH_NO_WAIT"
rather than "#ifndef MACH".
* (dcache_peek dcache_fetch dcache_poke): Make dcache_fetch and
dcache_poke call dcache_xfer_memory directly in order to fix
problems with turning off dcache. dcache_peek is now unnecessary,
so it goes away.
* defs.h: Define new macros HOST_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT
and TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT to specify a pointer
to a struct floatformat. This allows for better handling of
targets whose floating point formats differ from the host by more
than just byte order.
* (floatformat_to_long_double floatformat_from_long_double):
Prototypes for new functions in utils.c.
* (floatformat_to_doublest floatformat_from_doublest): Prototypes
for pointers to floating point conversion functions. The actual
function uses either double or long double if the host supports it.
* findvar.c (floatformat_to_doublest floatformat_from_doublest):
Initialize to point at correct function depending on HAVE_LONG_DOUBLE.
* (extract_floating store_floating): Rewrite. Now, if host fp
format is the same as the target, we just do a copy. Otherwise,
we call floatformat_{to from}_doublest.
* remote-nindy.c (nindy_xfer_inferior_memory): Change param
`write' to `should_write'.
* utils.c (floatformat_to_long_double
floatformat_from_long_double): New routines that implement long
double versions of functions in libiberty/floatformat.c.
* config/i960/tm-i960.h (TARGET_LONG_DOUBLE_FORMAT): Define this for
i960 extended real (80 bit) numbers.
* nindy-share/nindy.c (ninMemGet ninMemPut): Return number of bytes
actually read or written.
(calculate_array_length): Move function from here ...
* ch-exp.c (calculate_array_length): ... to here.
(parse_primval): If we have a symbol with an array type
and the length is 0, call calculate_array_length.
Add some checks for powerset compatibility.
* valops.c (value_slice): Use lowbound instead of lowerbound for
call to slice_range_type to get correct bounds.
dependencies.
* scm-lang.c (gdb_string.h): Include.
* objfiles.c (add_to_objfile_sections): Cast second arg of obstack_grow
call to correct type (char *).
* cp-valprint.c (cp_print_static_field): Ditto.
* somsolib.c (som_solib_create_inferior_hook): Add a declaration
for external find_unwind_entry function (from hppa-tdep.c).
* remote-pa.c (remote_write_bytes, remote_read_bytes): Change
type of second arg to "char *" to be type compatible with
dcache.
(remote_wait): Cast second arg to strtol to correct type.
* hppa-tdep.c (compare_unwind_entries): Change argument types to
"const void *" to be type compatible with qsort, and then
assign to local args prior to use.
* configure: Regenerate.
From: Robert Lipe <robertl@dgii.com>
Add support for SCO OpenServer 5 (a.k.a. 3.2v5*) This
target is an SVR3.2 with COFF, ELF, and shared libes, but
no /proc.
* config/i386/i386sco5.mh: New file.
* config/i386/nm-i386sco5.h: New file.
(add_psymbol_to_list): Add an arg for passing CORE_ADDR values and
use it, rather than calling add_psymbol_addr_to_list.
(add_psymbol_addr_to_list): Delete.
(add_psymbol_to_list): Make psymbol static to avoid random data in
gaps due to alignment of structure members.
* symfile.h (INLINE_ADD_PSYMBOL, ADD_PSYMBOL_TO_LIST,
ADD_PSYMBOL_ADDR_TO_LIST): Remove. Real world tests show no
performance improvements by inlining via complicated macros and
they just make gdb larger and harder to maintain.
* dwarfread.c (add_enum_psymbol): Replace ADD_PSYMBOL_TO_LIST
and/or ADD_PSYMBOL_ADDR_TO_LIST macro(s) with call to
add_psymbol_to_list with appropriate long or CORE_ADDR args.
(add_partial_symbol): Ditto.
* partial-stab.h: Ditto.
* os9kread.c (read_os9k_psymtab): Ditto
* mdebugread.c (parse_partial_symbols): Ditto.
(handle_psymbol_enumerators): Ditto.
(demangle.h): Include.
* hpread.c (hpread_build_psymtabs): Ditto.
(hpread_build_psymtabs): Ditto.
(demangle.h): Include
(gdb_cmd): Test it before executing any command.
(gdbtk_call_command): Set it when inferior is running.
* gdbtk.tcl (gdbtk_tcl_busy, gdbtk_tcl_idle): Enable and
disable interaction with command window's text appropriately.
