* config/mips/irix6.mh: New file.
* config/mips/irix6.mt: New file.
* config/mips/xm-irix6.h: New file.
* config/mips/nm-irix6.h: New file.
* mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
disassembler info in tm_print_insn_info as appropriate for the N32
ABI. Force N32 ABI to be the default if the CPU is R8000 or
R10000.
* configure.tgt (mips*-sgi-irix6*): Map to irix6.
* configure.host (mips*-sgi-irix6*): Ditto.
* config/djgpp/fnchange.lst: Add two new files in the
gdb/testsuite/gdb.c++/ directory to the remapped names.
* config/djgpp/djconfig.sh (lt_cv_sys_max_cmd_len): Set to 12KB.
(i386_register_convertible): New function.
* config/i386/tm-i386.h (REGISTER_VIRTUAL_TYPE): Redefine in terms
of i386_register_virtual_type.
(REGISTER_CONVERTIBLE): Redefine in terms of
i386_register_convertible.
(i386_register_virtual_type, i386_register_convertible): New
prototypes.
saves in general.
* config/mn10300/tm-mn10300.h (D0_REGNUM, A0_REGNUM, MDRQ_REGNUM,
MCRH_REGNUM, MCRL_REGNUM, MCVF_REGNUM): New definitions.
(enum movm_register_bits): New enum.
* mn10300-tdep.c (set_movm_offsets): Use symbolic names for the
bits, not hex literals. Handle the `other', `exreg0', and
`exother' bits. Correct handling of `exreg1': it saves r4, r5,
r6, and r7, not r2, r3, r4, and r5.
(saved_regs_size): New function.
(mn10300_frame_chain, mn10300_frame_saved_pc): Use it, instead
of computing the same thing inline, incorrectly.
stuff out into mn10300_pop_frame_regular, and use
generic_pop_current_frame. This lets us share code, and also
makes this function's prototype match that expected by gdbarch.
Make this function static.
(mn10300_pop_frame_regular): New function.
(mn10300_gdbarch_init): Register mn10300_pop_frame as the
gdbarch's pop_frame method.
* config/mn10300/tm-mn10300.h (POP_FRAME): Delete definition.
(mn10300_pop_frame): Delete declaration.
than the tm-*.h file.
* config/mn10300/tm-mn10300.h (MAX_REGISTER_VIRTUAL_SIZE,
REGISTER_BYTES, FP_REGNUM, BREAKPOINT_FROM_PC,
FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK, INNER_THAN,
SAVED_PC_AFTER_CALL, INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS,
FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC,
EXTRACT_RETURN_VALUE, EXTRACT_STRUCT_VALUE_ADDRESS,
STORE_RETURN_VALUE, STORE_STRUCT_RETURN, SKIP_PROLOGUE,
FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS,
FRAME_NUM_ARGS, POP_FRAME, USE_GENERIC_DUMMY_FRAMES, CALL_DUMMY,
CALL_DUMMY_START_OFFSET, CALL_DUMMY_BREAKPOINT_OFFSET,
CALL_DUMMY_LOCATION, FIX_CALL_DUMMY, CALL_DUMMY_ADDRESS,
TARGET_READ_FP, PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME,
SAVE_DUMMY_FRAME_TOS, PUSH_ARGUMENTS, PC_IN_CALL_DUMMY,
REG_STRUCT_HAS_ADDR, USE_STRUCT_CONVENTION, GET_SAVED_REGISTER):
Delete definitions. We register gdbarch methods for these now.
(struct frame_info, struct type, struct value): Delete forward
declarations of these types; they're no longer necessary, since we
don't have function declarations here any more.
* mn10300-tdep.c: #include "arch-utils.h", to get declarations for
some default gdbarch methods.
(mn10300_store_struct_return): Return void, as expected by
gdbarch.
(mn10300_init_extra_frame_info): Take initial `fromleaf' argument,
as expected by gdbarch.
(mn10300_frame_init_saved_regs): Provide dummy definition for
this, as required by gdbarch.
(mn10300_gdbarch_init): Add mn10300_call_dummy_words, as expected
by gdbarch. Register gdbarch methods or values for all the stuff
removed from tm-10300.h, listed above.
(rs6000_in_solib_return_trampoline): Declare.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): New
function.
(rs6000_skip_trampoline_code): Skip bigtoc fixup code.
* xcoffread.c (read_xcoff_symtab): Perform the ISFCN function
check after the CSECT check rather than before it. Allocate
separate symtabs for CSECTs whose names begin with '@'.
(scan_xcoff_symtab): Don't ignore symbols beginning with '@'.
Activate the misc_func_recorded mechanism for whose names begin
with '@'.
* config/i386/tm-i386.h (FRAMELESS_FUNCTION_INVOCATION): Redefine
in terms of i386_frameless_function_invocation. Adjust comment.
(i386_frameless_function_invocation): New prototype.
* config/i386/tm-i386.h (EXTRACT_STRUCT_VALUE_ADDRESS): Redefine
in terms of i386_extract_struct_value_address.
(i386_extract_struct_value_address): New prototype.
value to `unsigned long'. Change type of `value' to `unsigned
long'.
(i386_linux_dr_set): Change type of second argument to `unsigned
long'.
(i386_linux_dr_set_control): Change type of first argument to
`unsigned long'.
(i386_linux_dr_get_status): Change type of return value to
unsigned long.
* config/i386/nm-linux.h (i386_linux_dr_set_control,
i386_linux_dr_get_status): Adjust prototypes accordingly.
config/i386/nm-linux.h (including comment).
(i386_linux_frame_chain): New function implementing guts of the
former FRAME_CHAIN macro, but using read_memory_unsigned_integer
instead of read_memory_integer.
(i386_linux_frame_saved_pc): Removed doc pointing to
i386/tm-linux.h for an explanation of FRAMELESS_SIGNAL since that
now lives in this file.
* config/i386/tm-linux.h (FRAMELESS_SIGNAL): Moved to
i386-linux-tdep.c (including comment).
(FRAME_CHAIN): Redefined in terms of i386_linux_frame_chain.
(i386_linux_frame_chain): New prototype.
i386_linux_sigtramp_saved_sp): Make static.
(i386_linux_frame_saved_pc): New function based on the old
FRAME_SAVED_PC macro, but use read_memory_unsigned_integer instead
of read_memory_integer.
* config/i386/tm-linux.h (sigtramp_saved_pc): Remove definition.
(i386_linux_sigtramp_saved_pc): Remove prototype.
(FRAME_SAVED_PC): Redefine in terms of i386_linux_frame_saved_pc.
(i386_linux_frame_saved_pc): New prototype.
functions.
* config/i386/tm-i386.h (PUSH_ARGUMENTS): New macro.
(STORE_STRUCT_RETURN): Redefine in terms of
i386_store_struct_return.
(i386_push_arguments, i386_store_struct_return): New prototypes.
* config/i386/tm-i386v.h (STORE_STRUCT_RETURN): Remove. It's
definition was identical to the definition in "i386/tm-i386.h" so
the new definition should suffice too.
* ser-go32.c (rawclock): Remove prototype; include time.h instead.
(ISR, dos_hookirq, isr_t): Convert K&R definition to ANSI C.
(top level) <string.h>: Include gdb_string.h instead.
(dos_noop, dos_raw, dos_noflush_set_tty_state)
(dos_print_tty_state, dos_info): Remove ATTRIBUTE_UNUSED.
* go32-nat.c (go32_create_inferior): Move the declaration of
`environ' to here from the top level.
(top level) <_initialize_go32_nat>: Remove redundant prototype.
<gdb_string.h>: Include it instead of string.h.
(store_register): Call register_buffer instead of accessing
registers[] directly.
(redir_cmdline_delete, redir_cmdline_parse, redir_to_debugger)
(redir_to_debugger, redir_debug_init) [__DJGPP_MINOR__ < 3]: Put
the function names at the start of the line.
(go32_set_dr): Throw internal_error if the argument is not a valid
debug register number.
(go32_open, go32_close, go32_attach, go32_detach, go32_resume)
(go32_wait, go32_xfer_memory, go32_files_info)
(go32_terminal_info): Remove ATTRIBUTE_UNUSED.
and watchpoints on x86 targets.
* i386-linux-nat.c: Doc fixes. Include "gdb_assert.h".
[HAVE_SYS_DEBUGREG_H]: Include <sys/debugreg.h>.
(DR_FIRSTADDR, DR_LASTADDR, DR_STATUS, DR_CONTROL): Define to
appropriate value if not already defined.
(register_u_addr): New function.
(kernel_u_size): New function.
(i386_linux_dr_get, i386_linux_dr_set): New functions.
(i386_linux_dr_set_control, i386_linux_dr_set_addr,
i386_linux_reset_addr, i386_linux_dr_get_status): New functions.
* config/i386/nm-linux.h: Don't include "nm-i386v.h".
(I386_USE_GENERIC_WATCHPOINTS): Define and include "nm-i386.h".
(TARGET_HAS_HARDWARE_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINTS, HAVE_CONTINUABLE_WATCHPOINT,
STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
target_remove_watchpoint): Remove macros.
(i386_stopped_by_watchpoint, i386_insert_watchpoint,
i386_remove_watchpoint): Remove prototypes.
(register_u_addr): New prototype.
(REGISTER_U_ADDR): Define in terms of register_u_addr.
(i386_linux_dr_set_control, i386_linux_dr_set_addr,
i386_linux_reset_addr, i386_linux_dr_get_status): New prototypes.
(I386_DR_LOW_SET_CONTROL, I386_DR_LOW_SET_ADDR,
I386_DR_LOW_RESET_ADDR, I386_DR_LOW_GET_STATUS): New macros.
* config/i386/linux.mh (NATDEPFILES): Replace i386v-nat.o with
i386-nat.o.
