Commit graph

86398 commits

Author SHA1 Message Date
Alan Modra
5c14705fb3 Regen configure
Picks up 2016-01-12 libtool.m4 change.

bfd/
	* configure: Regenerate.
binutils/
	* configure: Regenerate.
gas/
	* configure: Regenerate.
gprof/
	* configure: Regenerate.
ld/
	* configure: Regenerate.
opcodes/
	* configure: Regenerate.
2016-01-17 12:28:14 +10:30
Alan Modra
b3066ae825 m68hc11/12 and xgate config.sub weirdness
Oddly, config.sub converts a duple ending in -elf for these target to
-unknown-none, which means they aren't seen as elf targets by
binutils.  So, counter that.  This exposes a number of testsuite
issues (ones you would have seen if configuring with a full triple,
say m68hc11-unknown-elf).

binutils/
	* testsuite/lib/binutils-common.exp (is_elf_format): Return true
	for m68hc11/12 and xgate triples.
gas/
	* testsuite/gas/cfi/cfi.exp: Exclude m68hc11/12 from m68k test.
ld/
	* testsuite/lib/ld-lib.exp (check_shared_lib_support): Exclude xgate.
	* testsuite/ld-elf/endsym.d: xfail m68hc11/12 and xgate.
	* testsuite/ld-elf/pr14156a.d: Likewise.
	* testsuite/ld-elf/pr14926.d: Don't run for m68hc11/12 and xgate.
	* testsuite/ld-elf/sec64k.exp: Likewise.
2016-01-17 12:13:43 +10:30
Alan Modra
adec12c116 m68hc11/12 readelf support
Supports relocation of debug sections.

	* readelf.c (is_32bit_abs_reloc): Add R_M68HC11_32.
2016-01-17 12:13:30 +10:30
GDB Administrator
4e566232a7 Automatic date update in version.in 2016-01-17 00:00:08 +00:00
Han Shen
9a472eda40 [gold][aarch64] PR gold/19472 - DSOs need pc-relative stubs.
The stub generated during relaxation uses absolute addressing mode for
shared libraries, which is not correct. Use pc-relative addressing
instead.

gold/ChangeLog:

2016-01-15 Han Shen  <shenhan@google.com>

	PR gold/19472 - DSOs need pc-relative stubs.

	* aarch64.cc (Reloc_stub::stub_type_for_reloc): Return
	PC-relative stub type for DSOs and pie executables.
2016-01-15 17:10:04 -08:00
GDB Administrator
f516a4c208 Automatic date update in version.in 2016-01-16 00:00:09 +00:00
Sandra Loosemore
f74f61cbf7 Fix phony_iconv wide character support.
2016-01-15  Sandra Loosemore  <sandra@codesourcery.com>

	gdb/
	* charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET):
	Conditionalize for Windows host.
	(GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET.
	(GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
	(phony_iconv_open): Handle both UTF-32 endiannesses.
	(phony_iconv): Likewise.  Check for output overflow and clean up
	out-of-input cases.  Correct adjustment to input buffer pointer.
	(set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match
	phony_iconv_open.
2016-01-15 14:45:19 -08:00
Pedro Alves
71ef29a86b Star wildcard ranges (e.g., "info thread 2.*")
Add support for specifying "all threads of inferior N", by writing "*"
as thread number/range in thread ID lists.

E.g., "info threads 2.*" or "thread apply 2.* bt".

gdb/ChangeLog:
2016-01-15  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention star wildcard ranges.
	* cli/cli-utils.c (get_number_or_range): Check state->in_range first.
	(number_range_setup_range): New function.
	* cli/cli-utils.h (number_range_setup_range): New declaration.
	* thread.c (thread_apply_command): Support star TID ranges.
	* tid-parse.c (tid_range_parser_finished)
	(tid_range_parser_string, tid_range_parser_skip)
	(get_tid_or_range, get_tid_or_range): Handle
	TID_RANGE_STATE_STAR_RANGE.
	(tid_range_parser_star_range): New function.
	* tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
	New value.
	(tid_range_parser_star_range): New declaration.

gdb/doc/ChangeLog:
2016-01-15  Pedro Alves  <palves@redhat.com>

	* gdb.texinfo (Threads) <thread ID lists>: Document star ranges.

gdb/testsuite/ChangeLog:
2016-01-15  Pedro Alves  <palves@redhat.com>

	* gdb.multi/tids.exp: Test star wildcard ranges.
2016-01-15 21:46:23 +00:00
Pedro Alves
3f5b759880 Fix "thread apply $conv_var" and misc other related problems
This fixes a few bugs in "thread apply".

While this works:

 (gdb) thread apply 1 p 1234

 Thread 1 (Thread 0x7ffff7fc1740 (LWP 14048)):
 $1 = 1234

This doesn't:

 (gdb) thread apply $thr p 1234

 Thread 1 (Thread 0x7ffff7fc1740 (LWP 12039)):
 Invalid thread ID: p 1234
 (gdb)

~~~~

Also, while this works:
 (gdb) thread apply 1
 Please specify a command following the thread ID list

This doesn't:
 (gdb) thread apply $thr
 Thread 1 (Thread 0x7ffff7fc1740 (LWP 12039)):
 [Current thread is 1 (Thread 0x7ffff7fc1740 (LWP 12039))]
 (gdb)

~~~~

And, while this works:
 (gdb) thread apply
 Please specify a thread ID list

This obviously bogus invocation is just silent:
 (gdb) thread apply bt
 (gdb)

gdb/ChangeLog:
2016-01-15  Pedro Alves  <palves@redhat.com>

	* thread.c (thread_apply_command): Use the tid range parser to
	advance past the thread ID list.
	* tid-parse.c (get_positive_number_trailer): New function.
	(parse_thread_id): Use it.
	(get_tid_or_range): Use it.  Return 0 instead of throwing invalid
	thread ID error.
	(get_tid_or_range): Detect negative values.  Return 0 instead of
	throwing invalid thread ID error.

gdb/testsuite/ChangeLog:
2016-01-15  Pedro Alves  <palves@redhat.com>

	* gdb.multi/tids.exp (thr_apply_info_thr_error): Remove "p 1234"
	command from "thread apply" invocation.
	(thr_apply_info_thr_invalid): Default the expected output to the
	input tid list.
	(top level): Add tests that use convenience variables.  Add tests
	for "thread apply" with a valid TID list, but missing the command.
2016-01-15 21:46:22 +00:00
GDB Administrator
9c03a84f6c Automatic date update in version.in 2016-01-15 00:00:08 +00:00
Nick Clifton
4d82fe66e8 Fix display of RL78 MOVW instructions that use the stack pointer.
* rl78-decode.opc (rl78_decode_opcode): Add 's' operand to movw
	instructions that can support stack pointer operations.
	* rl78-decode.c: Regenerate.
	* rl78-dis.c: Fix display of stack pointer in MOVW based
	instructions.

	* testsuite/gas/rl78/sp-relative-movw.s: New test.
	* testsuite/gas/rl78/sp-relative-movw.d: Expected disassembly.
	* testsuite/gas/rl78/rl78.exp: Run the new test.
2016-01-14 16:23:35 +00:00
Yao Qi
e7cf25a8ab [ARM] Remove field syscall_next_pc in struct gdbarch_tdep
Field syscall_next_pc in struct gdbarch_tdep was to calculate the
next pc of syscall instruction.  On linux target, syscall_next_pc
is set to arm_linux_syscall_next_pc, to do linux specific things.
However, after we have struct arm_get_next_pcs_ops, we can do the
same thing in struct arm_get_next_pcs_ops field syscall_next_pc,
so syscall_next_pc in struct gdbarch_tdep is not needed any more.

gdb:

2016-01-14  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
	Declare.
	(arm_linux_get_next_pcs_ops): Install
	arm_linux_get_next_pcs_syscall_next_pc.
	(arm_linux_syscall_next_pc): Change to ...
	(arm_linux_get_next_pcs_syscall_next_pc): ... it.
	(arm_linux_init_abi): Don't set tdep->syscall_next_pc.
	* arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare.
	(arm_get_next_pcs_syscall_next_pc): Make it static.  Don't
	call tdep->syscall_next_pc.
	* arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove.
	(arm_get_next_pcs_syscall_next_pc): Remove.
2016-01-14 14:54:24 +00:00
Yao Qi
c0518081f0 Fix C++ build error by casting void *
Two recent patches breaks GDB C++ mode build,

  https://sourceware.org/ml/gdb-patches/2016-01/msg00150.html
  https://sourceware.org/ml/gdb-patches/2016-01/msg00086.html

gdb/remote.c: In function 'int remote_set_syscall_catchpoint(target_ops*, int, int, int, int, int*)':
gdb/remote.c:2036:39: error: invalid conversion from 'void*' to 'char*' [-fpermissive]
       catch_packet = xmalloc (maxpktsz);
                                       ^

gdb/thread.c: In function 'int do_captured_thread_select(ui_out*, void*)':
gdb/git/gdb/thread.c:1999:24: error: invalid conversion from 'void*' to 'const char*' [-fpermissive]
   const char *tidstr = tidstr_v;
                        ^

this patch fixes them by casting void * to the right type.

gdb:

2016-01-14  Yao Qi  <yao.qi@linaro.org>

	* remote.c (remote_set_syscall_catchpoint): Cast to char *.
	* thread.c (do_captured_thread_select): Cast to const char *.
2016-01-14 12:28:02 +00:00
Matthew Wahab
651657fa61 [AArch64] Fix missing architecture checks for ARMv8.2 system registers.
Some of the RAS system registers added to binutils as part of the ARMv8.2
support are missing the feature checks to warn when they aren't
supported by the target.

This patch adds the missing feature checks with a test to check that
the correct warnings are given for all the ARMv8.2 system registers.

gas/
2016-01-14  Matthew Wahab  <matthew.wahab@arm.com>

	* testsuite/gas/aarch64/illegal-sysreg-2.l: New.
	* testsuite/gas/aarch64/illegal-sysreg-2.d: New.

opcodes/
2016-01-14  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-opc.c (aarch64_sys_reg_supported_p): Merge conditionals
	testing for RAS support.  Add checks for erxfr_el1, erxctlr_el1,
	erxtatus_el1 and erxaddr_el1.

Change-Id: I66b590ea49c1eb6b0e5c93e0dc2bc9c4e79a52fe
2016-01-14 10:55:11 +00:00
Thomas Preud'homme
4c4ac9642a Fix Thumb-Thumb farcall v6-M (no profile) test
2016-01-14  Thomas Preud'homme  <thomas.preudhomme@arm.com>

ld/
    * testsuite/ld-arm/arm-elf.exp (Thumb-Thumb farcall v6-M (no profile)):
    Set address of .foo section when linking.
    * testsuite/ld-arm/farcall-thumb-thumb-m-no-profile-b.s: Place myfunc
    in .foo section.
    * testsuite/ld-arm/farcall-thumb-thumb-m-no-profile.d: Adapt expected
    output to the above changes.
2016-01-14 18:00:55 +08:00
Yao Qi
1b451dda5f [ARM] Make thumb2_breakpoint static again
This patch makes thumb2_breakpoint static.  When writing this patch,
I find the only reason we keep thumb2_breakpoint extern is that it
is used as an argument passed to arm_gdbserver_get_next_pcs.  However,
field arm_thumb2_breakpoint is only used in a null check in
thumb_get_next_pcs_raw, so I wonder why do need to pass thumb2_breakpoint
to arm_gdbserver_get_next_pcs.

thumb2_breakpoint was added by Daniel Jacobowitz in order to support
single-step IT block
https://sourceware.org/ml/gdb-patches/2010-01/msg00624.html  the logic
there was if we have 32-bit thumb-2 breakpoint defined, we can safely
single-step IT block, otherwise, we can't.  Daniel didn't want to use
16-bit thumb BKPT instruction, because it triggers even on instruction
which should be executed.  Secondly, using 16-bit thumb illegal
instruction on top of 32-bit thumb instruction may break the meaning of
original IT blocks, because the other 16-bit can be regarded as an
instruction.  See more explanations from Daniel's kernel patch
http://www.spinics.net/lists/arm-kernel/msg80476.html

Let us back to this patch, GDB/GDBserver can safely single step
IT block if thumb2_breakpoint is defined, but the single step logic
doesn't have to know the thumb-2 breakpoint instruction.  Only
breakpoint insertion mechanism decides to use which breakpoint
instruction.  In the software single step code, instead of pass
thumb2_breakpoint, we can pass a boolean variable
has_thumb2_breakpoint indicate whether the target has thumb-2
breakpoint defined, which is equivalent to the original code.

Regression tested on arm-linux.  No regression.

gdb:

2016-01-14  Yao Qi  <yao.qi@linaro.org>

	* arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
	argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
	(thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
	instead.
	* arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
	<arm_thumb2_breakpoint>: Remove.
	<has_thumb2_breakpoint>: New field.
	(arm_get_next_pcs_ctor): Update declaration.
	* arm-linux-tdep.c (arm_linux_software_single_step): Pass
	1 to arm_get_next_pcs_ctor.
	* arm-tdep.c (arm_software_single_step): Pass 0 to
	arm_get_next_pcs_ctor.

gdb/gdbserver:

2016-01-14  Yao Qi  <yao.qi@linaro.org>

	* linux-aarch32-low.c (thumb2_breakpoint): Make it static.
	* linux-aarch32-low.h (thumb2_breakpoint): Remove declaration.
	* linux-arm-low.c (arm_gdbserver_get_next_pcs): Pass 1 to
	arm_get_next_pcs_ctor.
2016-01-14 09:36:43 +00:00
GDB Administrator
fccbac73f9 Automatic date update in version.in 2016-01-14 00:00:09 +00:00
Maciej W. Rozycki
3facb0e9a7 Nios II/GAS: Fix build error in `output_movia'
Fix:

cc1: warnings being treated as errors
.../gas/config/tc-nios2.c: In function 'output_movia':
.../gas/config/tc-nios2.c:3474: warning: 'code' may be used uninitialized in this function
make[4]: *** [tc-nios2.o] Error 1

seen with GCC 4.1.2 and 4.4.7.

	gas/
	* config/tc-nios2.c (output_movia): Preset `code' to 0.
2016-01-13 21:00:01 +00:00
Ulrich Weigand
bc06e0b148 MAINTAINERS: Add Andreas Arnez as s390 target maintainer.
gdb/ChangeLog:

	* MAINTAINERS: Add Andreas Arnez as s390 target maintainer.
2016-01-13 18:57:59 +01:00
Yoshinori Sato
8a4c286981 Remove spurious condition in test for closing parenthesis.
* config/tc-h8300.c (get_operand): Remove spurious condition in
	test for closing parenthesis.
2016-01-13 17:47:34 +00:00
Yao Qi
4e7b8beaa3 Read instruction with byte_order_for_code
When reading instruction, we should use byte_order_for_code instead
of byte_order.

gdb:

2016-01-13  Yao Qi  <yao.qi@linaro.org>

	* arch/arm-get-next-pcs.c (arm_get_next_pcs_raw): Use
	byte_order_for_code to read instruction.
2016-01-13 16:15:31 +00:00
Pedro Alves
663f6d42f4 Add $_gthread convenience variable
This commit adds a new $_gthread convenience variable, that is like
$_thread, but holds the current thread's global thread id.

gdb/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention $_gthread.
	* gdbthread.h (struct thread_info) <global_num>: Mention
	$_gthread.
	* thread.c (thread_num_make_value_helper): New function.
	(thread_id_make_value): Delete.
	(thread_id_per_inf_num_make_value, global_thread_id_make_value):
	New.
	(thread_funcs): Adjust.
	(gthread_funcs): New.
	(_initialize_thread): Register $_gthread variable.

gdb/testsuite/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* gdb.base/default.exp: Expect $_gthread as well.
	* gdb.multi/tids.exp: Test $_gthread.
	* gdb.threads/thread-specific.exp: Test $_gthread.

gdb/doc/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* gdb.texinfo (Threads): Document the $_gthread convenience
	variable.
	(Convenience Vars): Likewise.
2016-01-13 11:03:19 +00:00
Pedro Alves
c84f6bbfe5 Implement "info threads -gid"
This commit makes global thread IDs optionaly visible in "info
threads", with the new "-gid" switch:

 (gdb) info threads -gid
   Id   GId  Target Id         Frame
   1.1  1    Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
   1.2  3    Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
   1.3  4    Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
   2.1  2    Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
   2.2  5    Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
 * 2.3  6    Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)

 (gdb) info threads
   Id   Target Id         Frame
   1.1  Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
   1.2  Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
   1.3  Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
   2.1  Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
   2.2  Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
 * 2.3  Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)

No regressions on x86_64 Fedora 20.

gdb/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention "info threads -gid".
	* gdbthread.h (struct thread_info) <global_num>: Mention "info
	threads -gid".
	* thread.c (info_threads_command): Handle "-gid".
	(_initialize_thread): Adjust "info threads" help string to mention
	-gid.

gdb/testsuite/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* gdb.multi/tids.exp: Test "info threads -gid".

gdb/doc/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* gdb.texinfo (Threads): Document "info threads -gid".
2016-01-13 11:02:05 +00:00
Pedro Alves
22a0232400 Add Python InferiorThread.global_num attribute
This commit adds a new Python InferiorThread.global_num attribute.
This can be used to pass the correct thread ID to Breakpoint.thread,
which takes a global thread ID, not a per-inferior thread number.

gdb/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention InferiorThread.global_num.
	* python/py-infthread.c (thpy_get_global_num): New function.
	(thread_object_getset): Register "global_num".

gdb/testsuite/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* gdb.multi/tids.exp: Test InferiorThread.global_num and
	Breakpoint.thread.
	* gdb.python/py-infthread.exp: Test InferiorThread.global_num.

gdb/doc/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* python.texi (Breakpoints In Python) <Breakpoint.thread>: Add
	anchor.
	(Threads In Python): Document new InferiorThread.global_num
	attribute.
2016-01-13 11:00:54 +00:00
Pedro Alves
5d5658a1d3 Per-inferior/Inferior-qualified thread IDs
This commit changes GDB to track thread numbers per-inferior.  Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:

 (gdb) info inferiors
   Num  Description       Executable
   1    process 6022     /home/pedro/gdb/tests/threads
 * 2    process 6037     /home/pedro/gdb/tests/threads
 (gdb) info threads
   Id   Target Id         Frame
   1.1  Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
   1.2  Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
   1.3  Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
   2.1  Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
   2.2  Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
 * 2.3  Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
 (gdb)
...
 (gdb) thread 1.1
 [Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
 (gdb)
...

etc.

You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.

The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number.  It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.

Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs.  IOW, nothing
changes from a MI frontend's perspective.

Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too.  Follow up patches will provide convenient means to access
threads' global IDs.

To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown.  E.g,.:

 (gdb) info inferiors
   Num  Description       Executable
 * 1    process 15275     /home/pedro/gdb/tests/threads
 (gdb) info threads
   Id   Target Id         Frame
 * 1    Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
 (gdb) add-inferior
 Added inferior 2
 (gdb) info threads
   Id   Target Id         Frame
 * 1.1  Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
 (gdb)

No regressions on x86_64 Fedora 20.

gdb/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention that thread IDs are now per inferior and global
	thread IDs.
	* Makefile.in (SFILES): Add tid-parse.c.
	(COMMON_OBS): Add tid-parse.o.
	(HFILES_NO_SRCDIR): Add tid-parse.h.
	* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
	* breakpoint.c (insert_breakpoint_locations)
	(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
	(print_one_breakpoint_location, set_longjmp_breakpoint)
	(check_longjmp_breakpoint_for_call_dummy)
	(set_momentary_breakpoint): Adjust to use global IDs.
	(find_condition_and_thread, watch_command_1): Use parse_thread_id.
	(until_break_command, longjmp_bkpt_dtor)
	(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
	to use global IDs.
	* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
	ptid_to_global_thread_id.
	* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
	* gdbthread.h (struct thread_info): Rename field 'num' to
	'global_num.  Add new fields 'per_inf_num' and 'inf'.
	(thread_id_to_pid): Rename thread_id_to_pid to
	global_thread_id_to_ptid.
	(pid_to_thread_id): Rename to ...
	(ptid_to_global_thread_id): ... this.
	(valid_thread_id): Rename to ...
	(valid_global_thread_id): ... this.
	(find_thread_id): Rename to ...
	(find_thread_global_id): ... this.
	(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
	(print_thread_info): Add comment.
	* tid-parse.h: New file.
	* tid-parse.c: New file.
	* infcmd.c (step_command_fsm_prepare)
	(step_command_fsm_should_stop): Adjust to use the global thread
	ID.
	(until_next_command, until_next_command)
	(finish_command_fsm_should_stop): Adjust to use the global thread
	ID.
	(attach_post_wait): Adjust to check the inferior number too.
	* inferior.h (struct inferior) <highest_thread_num>: New field.
	* infrun.c (handle_signal_stop)
	(insert_exception_resume_breakpoint)
	(insert_exception_resume_from_probe): Adjust to use the global
	thread ID.
	* record-btrace.c (record_btrace_open): Use global thread IDs.
	* remote.c (process_initial_stop_replies): Also consider the
	inferior number.
	* target.c (target_pre_inferior): Clear the inferior's highest
	thread num.
	* thread.c (clear_thread_inferior_resources): Adjust to use the
	global thread ID.
	(new_thread): New inferior parameter.  Adjust to use it.  Set both
	the thread's global ID and the thread's per-inferior ID.
	(add_thread_silent): Adjust.
	(find_thread_global_id): New.
	(find_thread_id): Make static.  Adjust to rename.
	(valid_thread_id): Rename to ...
	(valid_global_thread_id): ... this.
	(pid_to_thread_id): Rename to ...
	(ptid_to_global_thread_id): ... this.
	(thread_id_to_pid): Rename to ...
	(global_thread_id_to_ptid): ... this.  Adjust.
	(first_thread_of_process): Adjust.
	(do_captured_list_thread_ids): Adjust to use global thread IDs.
	(should_print_thread): New function.
	(print_thread_info): Rename to ...
	(print_thread_info_1): ... this, and add new show_global_ids
	parameter.  Handle it.  Iterate over inferiors.
	(print_thread_info): Reimplement as wrapper around
	print_thread_info_1.
	(show_inferior_qualified_tids): New function.
	(print_thread_id): Use it.
	(tp_array_compar): Compare inferior numbers too.
	(thread_apply_command): Use tid_range_parser.
	(do_captured_thread_select): Use parse_thread_id.
	(thread_id_make_value): Adjust.
	(_initialize_thread): Adjust "info threads" help string.
	* varobj.c (struct varobj_root): Update comment.
	(varobj_create): Adjust to use global thread IDs.
	(value_of_root_1): Adjust to use global_thread_id_to_ptid.
	* windows-tdep.c (display_tib): No longer accept an argument.
	* cli/cli-utils.c (get_number_trailer): Make extern.
	* cli/cli-utils.h (get_number_trailer): Declare.
	(get_number_const): Adjust documentation.
	* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
	thread IDs.
	* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
	(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
	* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
	* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
	Likewise.
	* python/py-breakpoint.c (bppy_set_thread): Likewise.
	* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
	* python/py-infthread.c (thpy_get_num): Add comment and return the
	per-inferior thread ID.
	(thread_object_getset): Update comment of "num".

gdb/testsuite/ChangeLog:
2016-01-07  Pedro Alves  <palves@redhat.com>

	* gdb.base/break.exp: Adjust to output changes.
	* gdb.base/hbreak2.exp: Likewise.
	* gdb.base/sepdebug.exp: Likewise.
	* gdb.base/watch_thread_num.exp: Likewise.
	* gdb.linespec/keywords.exp: Likewise.
	* gdb.multi/info-threads.exp: Likewise.
	* gdb.threads/thread-find.exp: Likewise.
	* gdb.multi/tids.c: New file.
	* gdb.multi/tids.exp: New file.

gdb/doc/ChangeLog:
2016-01-07  Pedro Alves  <palves@redhat.com>

	* gdb.texinfo (Threads): Document per-inferior thread IDs,
	qualified thread IDs, global thread IDs and thread ID lists.
	(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
	thread IDs.
	(Convenience Vars): Document the $_thread convenience variable.
	(Ada Tasks): Adjust to refer to thread IDs.
	(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
	Commands, GDB/MI Variable Objects): Update to mention global
	thread IDs.
	* guile.texi (Breakpoints In Guile)
	<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
	global thread IDs instead of thread IDs.
	* python.texi (Threads In Python): Adjust documentation of
	InferiorThread.num.
	(Breakpoint.thread): Mention global thread IDs instead of thread
	IDs.
2016-01-13 10:59:43 +00:00
Pedro Alves
43792cf0de Centralize thread ID printing
Add a new function to print a thread ID, in the style of paddress,
plongest, etc. and adjust all CLI-reachable paths to use it.

This gives us a single place to tweak to print inferior-qualified
thread IDs later:

 - [Switching to thread 1 (Thread 0x7ffff7fc2740 (LWP 8155))]
 + [Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]

etc., though for now, this has no user-visible change.

No regressions on x86_64 Fedora 20.

gdb/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (remove_threaded_breakpoints)
	(print_one_breakpoint_location): Use print_thread_id.
	* btrace.c (btrace_enable, btrace_disable, btrace_teardown)
	(btrace_fetch, btrace_clear): Use print_thread_id.
	* common/print-utils.c (CELLSIZE): Delete.
	(get_cell): Rename to ...
	(get_print_cell): ... this and made extern.  Adjust call callers.
	Adjust to use PRINT_CELL_SIZE.
	* common/print-utils.h (get_print_cell): Declare.
	(PRINT_CELL_SIZE): New.
	* gdbthread.h (print_thread_id): Declare.
	* infcmd.c (signal_command): Use print_thread_id.
	* inferior.c (print_inferior): Use print_thread_id.
	* infrun.c (handle_signal_stop)
	(insert_exception_resume_breakpoint)
	(insert_exception_resume_from_probe)
	(print_signal_received_reason): Use print_thread_id.
	* record-btrace.c (record_btrace_info)
	(record_btrace_resume_thread, record_btrace_cancel_resume)
	(record_btrace_step_thread, record_btrace_wait): Use
	print_thread_id.
	* thread.c (thread_apply_all_command): Use print_thread_id.
	(print_thread_id): New function.
	(thread_apply_command): Use print_thread_id.
	(thread_command, thread_find_command, do_captured_thread_select):
	Use print_thread_id.
2016-01-13 10:59:14 +00:00
Pedro Alves
8465445732 Add Python InferiorThread.inferior attribute
So a script can easily get at a thread's inferior and its number.

gdb/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention InferiorThread.inferior.
	* python/py-infthread.c (thpy_get_inferior): New.
	(thread_object_getset): Register "inferior".

gdb/testsuite/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* gdb.python/py-infthread.exp: Test InferiorThread.inferior.

gdb/doc/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* python.texi (Threads In Python): Document
	InferiorThread.inferior.
2016-01-13 10:58:03 +00:00
Pedro Alves
e3940304fe Add a new $_inferior convenience variable
Like $_thread, but holds the current inferior number.

gdb/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention $_inferior.
	* inferior.c (inferior_id_make_value): New.
	(inferior_funcs): New.
	(_initialize_inferior): Create $_inferior variable.

gdb/testsuite/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* gdb.base/default.exp: Expect $_inferior as well.
	* gdb.multi/base.exp: Test $_inferior.

gdb/doc/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	* gdb.texinfo (Inferiors and Programs): Document the $_inferior
	convenience variable.
	(Convenience Vars): Likewise.
2016-01-13 10:56:05 +00:00
Pedro Alves
a911d87ad7 Fix PR19388: Can't access $_siginfo in breakpoint (catch signal) condition
This commit merges both the registers and $_siginfo "thread
running/executing" checks into a single function.

Accessing $_siginfo from a "catch signal" breakpoint condition doesn't
work.  The condition always fails with "Selected thread is running":

 (gdb) catch signal
 Catchpoint 3 (standard signals)
 (gdb)
 condition $bpnum $_siginfo.si_signo == 5
 (gdb) continue
 Continuing.
 Error in testing breakpoint condition:
 Selected thread is running.

 Catchpoint 3 (signal SIGUSR1), 0x0000003615e35877 in __GI_raise (sig=10) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
 56        return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
 (gdb)

When accessing the $_siginfo object, we check whether the thread is
marked running (external/public) state and refuse the access if so.
This is so "print $_siginfo" at the prompt fails nicelly when the
current thread is running.  While evaluating breakpoint conditionals,
we haven't decided yet whether the thread is going to stop, so
is_running still returns true, and we thus always error out.

Evaluating an expression that requires registers access is really
conceptually the same -- we could think of $_siginfo as a pseudo
register.  However, in that case we check whether the thread is marked
executing (internal/private state), not running (external/public
state).  Changing the $_siginfo validation to check is_executing as
well fixes the bug in question.

Note that checking is_executing is not fully correct, not even for
registers.  See PR 19389.  However, I think this is the lesser of two
evils and ends up as an improvement.  We at least now have a single
place to fix.

Tested on x86_64 GNU/Linux.

gdb/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	PR breakpoints/19388
	* frame.c (get_current_frame): Use validate_registers_access.
	* gdbthread.h (validate_registers_access): Declare.
	* infrun.c (validate_siginfo_access): Delete.
	(siginfo_value_read, siginfo_value_write): Use
	validate_registers_access.
	* thread.c (validate_registers_access): New function.

gdb/testsuite/ChangeLog:
2016-01-13  Pedro Alves  <palves@redhat.com>

	PR breakpoints/19388
	* gdb.base/catch-signal-siginfo-cond.c: New file.
	* gdb.base/catch-signal-siginfo-cond.exp: New file.
2016-01-13 10:40:33 +00:00
Nick Clifton
8405419985 Mark the linker's -Bsymbolic-functions test as an expected failure for MIPS targets.
* ld-elf/elf.exp (-Bymsolic-functions): Expect to fail
	for MIPS targets.
2016-01-13 10:00:49 +00:00
Nick Clifton
13ce3603be Mark the linker's extract symbols test as an expected failure for MIPS targets.
* testsuite/ld-scripts/script.exp (extract_symbol_test): Expect to
	fail for MIPS targets.
2016-01-13 09:40:11 +00:00
Nick Clifton
1bce3adf99 Mark the rgn-at11 test as an expected failure for MIPS targets.
* ld-scripts/rgn-at11.d: Expect this test to fail for
	MIPS targets.
2016-01-13 09:26:22 +00:00
GDB Administrator
27b9952f2d Automatic date update in version.in 2016-01-13 00:00:13 +00:00
Josh Stone
82075af2c1 Implement 'catch syscall' for gdbserver
This adds a new QCatchSyscalls packet to enable 'catch syscall', and new
stop reasons "syscall_entry" and "syscall_return" for those events.  It
is currently only supported on Linux x86 and x86_64.

gdb/ChangeLog:

2016-01-12  Josh Stone  <jistone@redhat.com>
	    Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
	syscall_entry and syscall_return stop reasons.  Mention GDB
	support for remote catch syscall.
	* remote.c (PACKET_QCatchSyscalls): New enum.
	(remote_set_syscall_catchpoint): New function.
	(remote_protocol_features): New element for QCatchSyscalls.
	(remote_parse_stop_reply): Parse syscall_entry/return stops.
	(init_remote_ops): Install remote_set_syscall_catchpoint.
	(_initialize_remote): Config QCatchSyscalls.
	* linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.

gdb/doc/ChangeLog:

2016-01-12  Josh Stone  <jistone@redhat.com>
	    Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* gdb.texinfo (Remote Configuration): List the QCatchSyscalls packet.
	(Stop Reply Packets): List the syscall entry and return stop reasons.
	(General Query Packets): Describe QCatchSyscalls, and add it to the
	table and the detailed list of stub features.

gdb/gdbserver/ChangeLog:

2016-01-12  Josh Stone  <jistone@redhat.com>
	    Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* inferiors.h: Include "gdb_vecs.h".
	(struct process_info): Add syscalls_to_catch.
	* inferiors.c (remove_process): Free syscalls_to_catch.
	* remote-utils.c (prepare_resume_reply): Report syscall_entry and
	syscall_return stops.
	* server.h (UNKNOWN_SYSCALL, ANY_SYSCALL): Define.
	* server.c (handle_general_set): Handle QCatchSyscalls.
	(handle_query): Report support for QCatchSyscalls.
	* target.h (struct target_ops): Add supports_catch_syscall.
	(target_supports_catch_syscall): New macro.
	* linux-low.h (struct linux_target_ops): Add get_syscall_trapinfo.
	(struct lwp_info): Add syscall_state.
	* linux-low.c (handle_extended_wait): Mark syscall_state as an entry.
	Maintain syscall_state and syscalls_to_catch across exec.
	(get_syscall_trapinfo): New function, proxy to the_low_target.
	(linux_low_ptrace_options): Enable PTRACE_O_TRACESYSGOOD.
	(linux_low_filter_event): Toggle syscall_state entry/return for
	syscall traps, and set it ignored for all others.
	(gdb_catching_syscalls_p): New function.
	(gdb_catch_this_syscall_p): New function.
	(linux_wait_1): Handle SYSCALL_SIGTRAP.
	(linux_resume_one_lwp_throw): Add PTRACE_SYSCALL possibility.
	(linux_supports_catch_syscall): New function.
	(linux_target_ops): Install it.
	* linux-x86-low.c (x86_get_syscall_trapinfo): New function.
	(the_low_target): Install it.

gdb/testsuite/ChangeLog:

2016-01-12  Josh Stone  <jistone@redhat.com>
	    Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* gdb.base/catch-syscall.c (do_execve): New variable.
	(main): Conditionally trigger an execve.
	* gdb.base/catch-syscall.exp: Enable testing for remote targets.
	(test_catch_syscall_execve): New, check entry/return across execve.
	(do_syscall_tests): Call test_catch_syscall_execve.
2016-01-12 12:27:27 -08:00
H.J. Lu
41549dfbcc Fix compile error with use of 'typename' outside of template
* i386.cc (Target_i386::Classify_reloc::get_r_addend): Remove
	'typename'.
2016-01-12 12:21:53 -08:00
H.J. Lu
f9498162b9 Remove typename from Mips64_rela_data 2016-01-12 12:08:06 -08:00
Cary Coutant
8a8880cb67 Fix breakage for SHT_REL targets where get_r_addend() gives internal error.
gold/
	* arm.cc (Target_arm::Classify_reloc::get_r_addend): New method.
	* i386.cc (Target_i386::Classify_reloc::get_r_addend): New method.
	* mips.cc (Target_arm::Mips_classify_reloc::get_r_addend): (Both
	specializations) New method.
2016-01-12 11:39:50 -08:00
H.J. Lu
d1193addae Fix compile error with use of 'typename' outside of template.
elfcpp/
	* elfcpp_internal.h (Mips64_rel_data, Mips64_rela_data): Remove
	'typename'.
2016-01-12 11:27:55 -08:00
H.J. Lu
1985dc2d04 Sync top-level btool.m4 with GCC
Sync with GCC
	2015-11-26  David Edelsohn  <dje.gcc@gmail.com>

	* m4/libtool.m4 (export_symbols_cmds) [AIX]: Add global TLS "L"
	symbols.
2016-01-12 08:44:52 -08:00
Matthew Wahab
105bde5771 [ARM] Support ARMv8.2 RAS extension.
The ARMv8.2 architecture includes the RAS extension which adds an
instruction, ESB, and a number of coprocessor registers. This patch adds
the instruction to binutils, making it available when -march=armv8.2-a
is selected. It also adds tests for the instruction and for the
coprocessor registers.

gas/
2016-01-12  Matthew Wahab  <matthew.wahab@arm.com>

	* config/tc-arm.c (arm_ext_v8_2): New.
	(insns): Add "esb".
	* testsuite/gas/arm/armv8_2-a.d: New.
	* testsuite/gas/arm/armv8_2-a.s: New.

opcodes/
2016-01-12  Matthew Wahab  <matthew.wahab@arm.com>

	* arm-dis.c (arm_opcodes): Add "esb".
	(thumb_opcodes): Likewise.

Change-Id: I67f3d70789db78d1c66a56c4994675f99ac15e34
2016-01-12 16:41:07 +00:00
Yury Usishchev
ac06903dcf Add cantunwind when unwind info does not match start of section.
bfd     * elf32-arm.c (elf32_arm_fix_exidx_coverage): Insert cantunwind when
        address in first unwind entry does not match start of section.

tests   * ld-arm/arm-elf.exp: New test.
        * ld-arm/unwind-mix.d: New file.
        * ld-arm/unwind-mix1.s: New file.
        * ld-arm/unwind-mix2.s: New file.
2016-01-12 16:35:49 +00:00
H.J. Lu
ce5e165eae Sync top-level Makefile.def with GCC
2016-01-12  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR bootstrap/69134
	* Makefile.def (mpfr): Disable assembler.
	* Makefile.in: Regenerate.
2016-01-12 08:34:40 -08:00
Yao Qi
d18547d8b0 Fix invalid conversion from void * to gdb_byte *
This patch fixes the following GDB build error in C++ mode.

gdb/nat/linux-ptrace.c: In function 'int linux_child_function(void*)':
gdb/nat/linux-ptrace.c:323:65: error: invalid conversion from 'void*' to 'gdb_byte* {aka unsigned char*}' [-fpermissive]
   linux_fork_to_function (child_stack, linux_grandchild_function);
                                                                 ^

gdb:

2016-01-12  Yao Qi  <yao.qi@linaro.org>

	* nat/linux-ptrace.c (linux_child_function): Cast child_stack
	to gdb_byte * and pass to linux_fork_to_function.
2016-01-12 16:29:30 +00:00
Mike Frysinger
8f13a3ce8a gdbserver: use the new gdb warning helpers
We need to use -Wno-missing-prototypes for now as much of the code
sticks externs in local files and not in common headers.

2016-01-11  Mike Frysinger  <vapier@gentoo.org>

	* acinclude.m4: Include new ../warning.m4 file.
	* configure: Regenerated.
	* configure.ac: Replace all warning logic with AM_GDB_WARNINGS.
2016-01-12 10:34:57 -05:00
Mike Frysinger
5b3da067f0 gdbserver: fix various warnings
Delete unused funcs, update old prototypes, and mark local funcs
as static.  This doesn't cover all missing prototype warnings.
2016-01-12 10:34:17 -05:00
Yao Qi
ba4dd7c4a1 Change function signature passed to clone
I see the following compile error with an old bfin-uclinux gcc to
build GDBserver,

 cc1: warnings being treated as errors
 gdb/gdbserver/../nat/linux-ptrace.c: In function 'linux_fork_to_function':
 gdb/gdbserver/../nat/linux-ptrace.c:283: error: passing argument 1 of 'clone' from incompatible pointer type

in glibc, clone's prototype is like this, and in uClibc, it is the same,

       int clone(int (*fn)(void *), void *child_stack,
                 int flags, void *arg, ...
                 /* pid_t *ptid, struct user_desc *tls, pid_t *ctid */ );

so this patch changes function signature from 'void (*function) (gdb_byte *)'
to 'int (*function) (void *)'.

Note that I find Pedro advised to change argument type from 'void *'
to 'gdb_byte *' during the patch review
https://sourceware.org/ml/gdb-patches/2013-08/msg00611.html  however,
I think fix compile error can justify the change back to 'void *'.

gdb:

2016-01-12  Yao Qi  <yao.qi@linaro.org>

	* nat/linux-ptrace.c (linux_fork_to_function): Change type
	of argument 'function'.
	(linux_grandchild_function): Change return type to 'int'.
	Change child_stack's type to 'void *'.
	(linux_child_function): Likewise.
2016-01-12 15:18:09 +00:00
Pedro Alves
bc504a3117 Remove trademark acknowledgements throughout
The GNU Coding Standards say:

  "Please do not include any trademark acknowledgements in GNU
  software packages or documentation."

gdb/ChangeLog:
2016-01-12  Pedro Alves  <palves@redhat.com>

	Remove use of the registered trademark symbol throughout.

gdb/gdbserver/ChangeLog:
2016-01-12  Pedro Alves  <palves@redhat.com>

	Remove use of the registered trademark symbol throughout.

gdb/doc/ChangeLog:
2016-01-12  Pedro Alves  <palves@redhat.com>

	Remove use of the registered trademark symbol throughout.
2016-01-12 15:03:11 +00:00
Yao Qi
cde67b27d6 [DOC] Interrupt when program is stopped
This patch changes the document that interrupt (ctrl-c) is not ignored
when the program is stopped.

When the interrupt was supported in remote target, people thought interrupt
is meaningless when the program is stopped.  See

  https://www.sourceware.org/ml/gdb/2005-11/msg00349.html
  https://www.sourceware.org/ml/gdb-patches/2005-11/msg00307.html

recently we find it is hard to preserve this feature "ignore interrupt
while program is stopped" when we fix some other bugs.  See
https://sourceware.org/ml/gdb-patches/2016-01/msg00039.html

so we think we can go to the simpler approach "not ignoring ctrl-c when
program is stopped".  As a result, we tweak the documentation here.

gdb/doc:

2016-01-12  Yao Qi  <yao.qi@linaro.org>

	* gdb.texinfo (Interrupts): Update the document on handling
	interrupt when program is stopped.
2016-01-12 14:59:45 +00:00
Pedro Alves
e46eeeddfb Test gdb.base/random-signal.exp with "attach"
This exposes the issued fixed by 2f99e8fc9c:

  https://sourceware.org/ml/gdb-patches/2015-12/msg00423.html

to native debugging as well.

gdb/testsuite/ChangeLog:
2016-01-12  Pedro Alves  <palves@redhat.com>

	* gdb.base/random-signal.exp (do_test): New procedure, with body
	of testcase moved in.
	(top level) Call it twice, once with "run" and once with "attach".
2016-01-12 12:30:33 +00:00
Thomas Schwinge
5eddd57823 Hurd: Make gdb/reply_mig_hack.awk script compatible to "mawk"
The "mawk" AWK implementation did't like that regular expression:

    mawk: [...]/gdb/reply_mig_hack.awk: line 98: regular expression compile failed (missing operand)

	gdb/
	* reply_mig_hack.awk: Rewrite one regular expression.
2016-01-12 12:53:09 +01:00