around calls to create_longjmp_breakpoint. Why install the
breakpoints if we can't find the longjmp target?
* infrun.c (wait_for_inferior): Cleanup comments near call test.
* remote-mips.c: Fixed a bunch of prototypes to avoid char/int
complaint from picky compilers. Add comment to mips_expect.
Replace all instances of sr_get_debug with remote_debug.
* (mips_readchar): Don't jam init string to monitor.
mips_initialize() handles that.
* (mips_receive_header): Print better message when we get too
much garbage.
* (mips_request): Allow caller to pass in buff to allow them to
analyze the returned message.
* (mips_initialize): Re-do initialization to try sending a BREAK,
a ^C, and then a download escape sequence. Cleanup protocol
startup. Eliminate sleeps. Clear breakpoints (if using monitor
breakpoints). Re-init frame.
* (mips_detach): Close down target.
start-sanitize-gm
* (mips_resume): Pass signal down to target.
* (mips_create_inferior): Start target with TARGET_SIGNAL_PWR.
end-sanitize-gm
* (mips_wait): Handle return status with registers, or breakpoint stuff.
* (mips_kill): Add ^C handling.
* (mips_insert_breakpoint mips_remove_breakpoint): Call new
breakpoint stuff if enabled.
* (calculate_mask remote_mips_set_watchpoint
remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
Hardware watchpoint/breakpoint stuff.
* (common_breakpoint): Common code for new monitor breakpoint commands.
* (mips_load): Don't use `prompt'. It's a global variable.
* top.c (dont_repeat_command): New command for use in
user-defined commands to suppress auto-repeat (by hittin return key).
start-sanitize-gm
* utils.c (request_quit): Call target_kill here. Good idea.
Needs a better implementation.
end-sanitize-gm
* valops.c: Add start of auto function-call abandonment capability.
start-sanitize-gm
* c-exp.y: Add code (currently disabled) to handle GM dynamic
structures (it conflicts with @!).
* eval.c (evaluate_subexp_standard): ditto.
* expprint.c (print_subexp dump_expression): ditto.
* expression.h (enum exp_opcode): ditto.
* parse.c (length_of_subexp): ditto.
* configure, configure.in: Add mip*-*-magic* target.
* magic.c magic.h: Special routines to handle GM stuff (like
stepping through dispatcher).
end-sanitize-gm
Determine signedness of enum type from enumerators.
(parse_type): Handle btIndirect types, handle fBitfield for
some non-member types.
(upgrade_type): Use TYPE_FLAG_TARGET_STUB for arrays with
unknown length.
(cross_ref): Handle stIndirect forward reference to btTypedef.
* stabsread.c (read_enum_type): Determine signedness of enum
type from enumerators.
* top.c (execute_command): Remove trailing whitespace from
command arguments, except for `set' and `complete' commands.
(validate_comname): Allow underscores in user defined command
names.
* values.c (modify_field): Change `Value does not fit in %d bits'
error to a warning. Exclude sign extension bits of negative field
values from fit check.
* infrun.c (wait_for_inferior): Set the convenience variable
$_exitcode to the termination code of the inferior.
* top.c (quit_command): Accept optional expression to use
as parameter to exit().
to char, since everything passed in and out of dcache is char or casted
to appropriate type anyway.
(dcache_alloc): Move assignment of db out of test and combine separate
tests into if-else.
(dcache_peek_byte): Change ptr from unsigned char* to char*.
(dcache_peek_byte): Remove now unnecessary cast in read_memory call.
(dcache_peek): Change cast of incoming data arg.
(dcache_poke): Change cast of addr of incoming data arg.
(dcache_info): Mask data passed to printf_filtered to lsbyte only.
(dcache_info): Change printf_filtered arg from "% 2x" to " %2x".
* target.c (debug_to_thread_alive): Change return type to int and
return zero, for type compatibility with other *_thread_alive funcs.
(cleanup_target): Change cast of ignore function to match type of the
to_thread_alive member.
* defs.h (error_hook): Add ATTR_NORETURN.
* defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to
__attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug.
* remote.c (remote_wait): Cast first arg to strtol, strchr, and strncmp
to "const char *" from "unsigned char *".
(remote_wait): Cast arg to putpkt and strcpy from "unsigned char *" to
"char *".
(remote_wait): Change printf format for long arg from "%d" to "%ld".
(getpkt): Remove unused variable "bp".
(remote_fetch_word, remote_store_word): Ifdef out apparently unused
functions.
* breakpoint.c (watchpoint_check): Removed unused variables
"saved_level" and "saved_frame".
* valops.c (value_arg_coerce): Add other enum TYPE_CODE_* and
default cases to switch for completeness.
* infrun.c (wait_for_inferior): Enclose "have_waited" label
in #ifdef that matches the one in which it is referenced.
* ser-unix.c (hardwire_noflush_set_tty_state): Enclose otherwise
unused variable "state" in #ifdef that matches one in which it is
referenced.
* eval.c (evaluate_subexp_standard): Remove unused variable "var".
* eval.c (evaluate_subexp_standard): Remove unused variable "tmp_symbol".
* valarith.c (value_subscript): Remove unused variable "lowerbound",
which is redeclared in a nested scope prior to use.
* printcmd.c (print_frame_nameless_args): Use "%ld" to print long
arg, not "%d".
* {mem-break.c, remote-pa.c, remote.c, saber.suppress}:
Remove unused static var "check_break_insn_size".
* buildsym.c (finish_block): Add other enum LOC_* and default
cases to switch for completeness.
ch-lang.c (type_lower_upper): Removed unused label "retry".
Add other enum TYPE_* and default cases to switch for completeness.
* f-typeprint.c (f_type_print_args): Ifdef out unused function
that may be used someday when Fortran support is complete.
* ch-valprint.c (chill_print_type_scalar): Add other enum
TYPE_* and default cases to switch for completeness.
(chill_val_print): Remove unused local var "high_bound" that
is redeclared in a nested scope prior to use.
(chill_var_print): Use "%ld" to print long arg, not "%d".
* regex.c (re_compile_fastmap, re_match_2): Add remaining enum types
and default to switches for completeness.
* minsyms.c (lookup_minimal_symbol_text): Delete unused variable
"trampoline_symbol".
(prim_record_minimal_symbol_and_info): Return NULL rather than trash.
* elfread.c (elf_symtab_read): Don't dereference NULL returns from
record_minimal_symbol_and_info.
* f-lang.c (saved_function_list_end): Ifdef out unused variable
that may be used someday.
* f-valprint.c (f_val_print): Remove unused local variable "straddr".
* monitor.c: Turn on caching.
(monitor_printf): If a ^C was sent, don't expect to see its
echo.
(monitor_open): Enable caching.
(monitor_resume, monitor_load): Flush cache.
(monitor_xfer_memory): Call cache routine.
(monitor_dump_regs): New.
(monitor_fetch_registers): If monitor_dump_regs available
then use it.
(monitor_load): Don't ref exec_bfd if it's NULL.
(monitor_load_srec): Use new monitor_make_srec calling convention.
(monitor_make_srec): Rewrite to cope with two, three and four byte
addresses.
* remote-hms.c (hms_cmds): Initialze end-of-command delim.
* dcache.h, dcache.h: Rewritten.
* remote.c: Reenable caching.
(getpkt): Reduce MAX_TRIES to 3.
(remote_xfer_memory): Use dcache_xfer_memory.
* defs.h (error_hook): New.
* top.c (error_hook): New definition.
* utils.c (error): Use error_hook if initialized.
* sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
HAVE_SOCKETS in place of #ifndef GO32.
* defs.h: Don't declare strchr and friends if WIN32.
(DIRNAME_SEPARATOR): Move here from source.c.
(SLASH_P, SLASH_CHAR, SLASH_STRING, ROOTED_P): New macros,
symbolic definitions for filename bits.
* top.c (cd_command): Use these.
* source.c (mod_path, openp): Ditto.
* terminal.h: Disable termio/sgtty definitions if WIN32.
* findvar.c (registers_changed): Call registers_changed_hook
if it is defined.
attribute when compiled by gcc.
* defs.h, language.h, monitor.h: Changed many function
declarations to use ATTR_FORMAT.
* breakpoint.c (delete_command); source.c (directory_command);
top.c (define_command): Changed call to query() that had too
many arguments.
* printcmd.c (address_info): Changed call to printf_filtered()
that had too many arguments.
symbols, their value is the displacement from the procedure address.
* top.c (init_main): Add missing newlines to help strings for
`if' and `while' commands, fix help string for `show commands'.
enable/disable_breakpoint_hook with modify_breakpoint_hook.
* gdbtk.c: General cleanups, get rid of unused variables. Redo
handling of stdout/stderr to just return output as the result of
the tcl command that caused the output. Cleanup -Wall stuff.
* (breakpoint_notify): Now returns just action and breakpoint
number.
* (gdb_get_breakpoint_list): New routine. Does the obvious.
* (gdb_get_breakpoint_info): Mostly derived from the old
breakpoint_notify, but returns lots more info.
* (dsprintf_append_element): Helper routine, works like printf,
but appends a tcl element onto the specified DString. Good for
building up lists as return values.
* (gdbtk_enable/disable_breakpoint): Go away. Replaced with
gdbtk_modify_breakpoint.
* (*many routines*): Use new result protocol.
* (call_wrapper): Make sure that recursive calls don't trash results.
* gdbtk.tcl: New windows, autocmd, and breakpoints.
* (gdbtk_tcl_fputs): Don't use $current_output_win redirection
anymore. It's not needed (in fact, this routine may not be needed
anymore).
* (gdbtk_tcl_breakpoint): Change to reflect new breakpoint
notification protocol.
* (gdbtk_tcl_busy gdbtk_tcl_idle): Straighten out buttons, remove
catches.
* (interactive_cmd): Use this wrapper around button invocations
of many commands. This will catch errors and put the results into
the command window. It also updates all the other windows.
* Also, change reliefs of most things to sunken. This actually
looks better.
* (create_file_win): Fix margin binding to allow breakpoints to
work again.
* (create_asm_win): Use return value of gdb_disassemble instead
of implicit I/O to the command window.
* (create_command_window): Use new result protocol to get output
from commands.
top.c : Get rid of dis_asm_read_memory_hook. We can now call the
disassemblers directly and have no need for this hook anymore.
* defs.h, printcmd.c: Make print_insn be static.
* ser-go32.c (dos_comisr): Make this 8 bit clean.
* (dos_open dos_close): Allow multiple opens to the same device.
Use a ref count to prevent unwanted deallocations.
* sparcl-tdep.c: Put #ifdefs around all socket stuff to make GO32
happy.
* (sparclite_ops): Switch to download_stratum.
* target.h (enum strata): Move download_stratum before
process_stratum so that executable targets get pushed on top of
download targets.
* breakpoint.h (disable_breakpoint, enable_breakpoint):
New declarations.
(enum bpdisp): Change name of 'delete' member to 'del'.
(struct bpstat): Changed name to 'bpstats'.
* breakpoint.c (disable_breakpoint, enable_breakpoint,
breakpoint_chain): Made globally visible.
(bpstat_stop_status): Use new name for bpstat.
(break_command_1, watch_command_1, catch_command_1,
breakpoint_auto_delete, denable_delete_breakpoint): Use 'del'
instead of 'delete'.
(set_breakpoint_sal): New function.
* defs.h (registers_changed_hook): New declaration.
* infcmd.c (run_stack_dummy): 'delete' is now 'del'.
* inflow.c (new_tty): Treat WIN32 in same way as __GO32__
* main.c (main): Don't scan options when in WIN32 and exit
without entering main loop.
* m2-exp.y (m2_elx): Member 'class' is now 'aclass'.
* symtab.h (struct symbol, struct partial_symbol): Changed name of
member 'class' to 'aclass'.
(SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change.
* top.c (registers_changed_hook): New definition.
* utils.c (quit, notice_quit, initialize_utils): Treate WIN32
in same way as __GO32__.
* value.h (c_typedef_print): Rename 'new' argument.
defined command (including control structures).
* top.c (init_main): Change documentation for user defined
commands to indicate they may accept up to ten arguments.
* core.c (dis_asm_read_memory): Add call to
dis_asm_read_memory_hook to provide alternate way for disassembler
to read memory.
* defs.h: Protect from multiple inclusion. Add decl for
dis_asm_read_memory_hook.
* gdbtk.c (finish_saving_output): Don't do anything if not saving
output.
* (breakpoint_notify): Don't send null filename to tcl.
* (gdb_eval): New tcl command to eval an expression.
* (gdb_disassemble): New tcl command to do disassembly. This
allows tcl code to choose between exec file and target memeory,
and can also do mixed source and assembly.
* (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure
that more of the environment is set up. Also, create link between
gdb and tcl vars disassemble{-_}from{-_}exec.
* gdbtk.tcl: New expression window support.
* Make assembly window be 80 columns wide.
* Use new disassembly method. Add menu items to select
disassembly from exec file or target.
* Change View menubar item to Options.
* Get rid of Stack, Breakpoints, Signals, and Variables Windows,
since they don't exist yet.
* Pop up a copyright window on startup.
* top.c: Make window startup be the default.
* Add dis_asm_read_memory_hook.
commands.
* top.c (struct user_args): Structure for holding arguments to
user defined commands.
(print_command_line): Delete unused "tmp_chain" variable. Clean
up flow control by having cases exit in the same manner.
Before executing a command or evaluating an expression, substitute
the current $arg0..$arg9 values if the command/expression uses them.
(arg_cleanup): New function.
(setup_user_args, locate_arg, insert_args): Likewise.
(execute_user_command): Allow arguments to user defined commands.
* Allow if/while commands to be used within a breakpoint command
list.
* breakpoint.c (bpstat_do_actions): Call execute_control_command
rather than execute_command (passes entire command structure rather
than just the command line text).
(breakpoint_1): Use "print_command_line" to print a breakpoint
command line (including control structures).
* gdbcmd.h (execute_control_command): Provide extern decl.
(print_command_line): Likewise.
* top.c (execute_control_command): No longer static.
(print_command_line): New function to recursively print a command
line, including control structures.
to fputs_unfiltered_hook. Differentiate stdout from stderr when
passing text into tcl land.
* defs.h, top.c, utils.c (error): Add error_hook.
* gdbtk.c: Improve mechanism for capturing output values.
* (full_filename): Remove.
* (gdb_cmd call_wrapper gdbtk_init): Protect all calls from tcl
land with call_wrapper. This prevents longjmps (usually via
error()) from jumping out of tcl/tk and leaving things in an
indeterminate state.
* gdbtk.tcl: New view option to disable line numbers. Put catch
around most uses of gdb_cmd. Add update button to reg config
window. Stop doing immediate updates when selecting registers.
Change register view values into checkbuttons.
* main.c (display_time, display_space): New globals.
(main): Add argument --statistics to enable reporting, display
time and space after startup is done.
* maint.c (maintenance_time_display, maintenance_space_display):
New commands.
* top.c (command_loop): Display time and space after command
execution.
* top.c (pre_init_ui_hook): New global.
(gdb_init): If pre_init_ui_hook set, call before all other init.
symbol_completion_function, takes the line buffer and the
point in the line buffer as additional arguments.
(readline_line_completion_function): New function, interface
between readline and line_completion_function.
(init_main): Use it.
(complete_command): Use line_completion_function instead of
abusing rl_line_buffer. Free completion strings after printing
them.
* symtab.c (completion_list_add_name): Recheck for duplicates
if we intend to add a modified symbol.
* gdbtypes.h (cplus_struct_type): nfn_fields_total no longer
includes the number of methods from the baseclasses.
* stabsread.c (attach_fn_fields_to_type): No longer add the
number of methods from the baseclasses to TYPE_NFN_FIELDS_TOTAL,
the baseclass type might not have been completely filled in yet.
* symtab.c (total_number_of_methods): New function to compute
the total number of methods for a type, including the methods
from baseclasses.
(decode_line_1): Use it instead of TYPE_NFN_FIELDS_TOTAL to
allocate the symbol array for find_methods.
* stabsread.c (scan_file_globals): Add default case to minimal
symbol type switch, to avoid gcc -Wall warnings.
* config/rs6000/tm-rs6000.h (INIT_EXTRA_FRAME_INFO):
Don't test for zero backchain pointer to recognize a signal
handler frame, if read() gets interrupted by a signal, the
backchain will be non zero.
(SIG_FRAME_FP_OFFSET): Move to here from rs6000-tdep.c,
improve comment.
(SIG_FRAME_PC_OFFSET): New definition.
(FRAME_SAVED_PC): Return saved pc from sigcontext if this
is a signal handler frame.
* rs6000-tdep.c (function_frame_info): Do not error out
if we can't access the instructions.
* config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR):
New definition to get the function address from a function pointer.
* valops.c (find_function_addr): Use it when calling a user
function through a function pointer.
target_wait_hook to allow GUI to handle blocking for inferior. Call
call_command_hook in execute_command to provide means for wrapping
commands with GUI state change updates.
* gdbtk.c (gdb_cmd): Force GUI into idle mode when errors occur.
* (gdb_stop): New tcl command to stop the target process.
* (x_event, gdbtk_wait): Allow GUI to interrupt gdb out of target
waits.
* (gdbtk_call_command): Wrapper around command processing to
alert GUI of target state changes.
* (gdbtk_init): Get the fd of X server for doing async
notification of X events (via x_event). Setup new hooks.
* gdbtk.tcl: Add scrollbars to assembly and command windows.
* Change window foreground & background colors.
* Create margin tag for breakpoints in source and assembly windows.
* Add new routines to be invoked when target state changes to/from
idle.
* Add start of expression window.
* Change bindings of mouse button 1 in assembly and source window
to just set or clear breakpoints when in the margin tag.
* Change shape of register window to be more vertical to better
reflect it's contents.
* Add stop button.
* Cleanup some code around command window bindings.
* infrun.c (wait_for_inferior): Make sure
through_sigtramp_breakpoint is non-null before deleting.
(set_endian): Mention that ``auto'' is permitted.
(set_endian_auto): New static function.
(show_endian): Change message based on target_byte_order_auto.
(set_endian_from_file): New function.
(init_main): Add command ``auto'' to endianlist.
* exec.c (exec_file_command): Call set_endian_from_file.
* defs.h (set_endian_from_file): Declare.
define TARGET_BYTE_ORDER as target_byte_order, and declare
target_byte_order as an extern int, and define BITS_BIG_ENDIAN as
a test of TARGET_BYTE_ORDER.
* top.c: Several additions if TARGET_BYTE_ORDER_SELECTABLE is
defined:
(endianlist, target_byte_order): New variables.
(set_endian, set_endian_big, set_endian_little): New functions.
(show_endian): New function.
(init_cmd_lists): Initialize endianlist.
(init_main): Add commands ``set endian big'', ``set endian
little'', and ``show endian''.
* a29k-pinsn.c: Rewrite uses of TARGET_BYTE_ORDER and
BITS_BIG_ENDIAN to switch at run time rather than at compile time.
* coffread.c, dwarfread.c, findvar.c, mips-tdep.c: Likewise.
* remote-os9k.c, stabsread.c, valarith.c, valprint.c: Likewise.
* values.c: Likewise.
* mips-tdep.c: Rewrite uses of GDB_TARGET_IS_MIPS64 to switch at
run time rather than at compile time.
Also, add decl for symtab_to_filename.
* gdbtk.c: Replace calls to full_filename with symtab_to_filename.
* gdbtk.tcl: New routine pc_to_line replaces in line code. New
routine decr replaces in line code.
* (create_file_win): Use catch to handle open failures more
elegantly. Also, create special window to display file open
failure message. Move opening of file prior to creation of text
widget.
* (create_asm_win): Add PC as argument. We now base disassembly
on PC instead of function name, since function names can be
ambiguous (usually seen with shared libs). Also, use catch to
simplify code where we don't care about failures.
* source.c (symtab_to_filename): New. Returns the file
associated with a symtab.
* top.c: Define interactive_hook. Called during QUIT to animate
the GUI.
for describing the command and control types.
(struct command_line): Add new fields to keep track of the command
type and body associated with the command.
* top.c: Include value.h. Delete whitespace at the end of lines.
(build_command_line, get_command_line): New functions.
(execute_control_command, while_command, if_command): Likewise.
(realloc_body_list, read_next_line): Likewise.
(recurse_read_control_structure): Likewise.
(execute_user_command): Call execute_control_command.
(read_command_lines): Simplify by calling read_next_line, call
read_control_structure for "if" and "while" commands.
(free_command_lines): Free new fields in the command structure.
(define_command): Reset control_level to zero.
(init_main): Install command handlers for "if" and "while" commands.
--enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
where appropriate.
* General hackery to support alternate user-interface.
* breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
disable_breakpoint): Call hooks for alternate user-interface.
* defs.h: Add declarations for alternate user-interface hooks.
* main.c (main): Add --nw (and --nowindows) options to disable
the GUI.
* (near call to command_loop): Call command_loop_hook if set.
* (fputs_unfiltered): Call fputs_unfiltered_hook if set.
* stack.c: Call print_frame_info_listing_hook if set.
* top.c (gdb_init): Initialize targets.c and utils.c prior to
other files to make sure that calls to error and warning will
work. Call init_ui_hook after everything else.
* utils.c (query): Call query_hook if set.
* (gdb_flush): Call flush_hook if set.
* Change _initialize_utils to initialize_utils cuz we don't use
automatic initialization of utils.c anymore.
* Support for TK GUI.
* Makefile.in: Add rule for gdbtk.o.
* configure.in: Add support for --enable-gdbtk.
* gdbtk.c: New file. Contains support routines for TK interface.
* gdbtk.tcl: New file. Implements GUI policy.
* remote.c: Get rid of #ifdef DONT_USE_REMOTE. It's no longer
necessary.