* defs.h (struct continuation_arg): make 'data' a union, to avoid
casting problems when int and pointer are not the same size.
* event-top.c (command_handler): use data as a union.
(command_line_handler_continuation): ditto.
* infcmd.c (step_1_continuation): use data as a union. Re-indent.
(step_once): ditto. (finish_command_continuation): ditto.
(finish_command): ditto.
* breakpoint.c (until_break_command): use data as a union.
(until_break_command_continuation): ditto.
* utils.c (add_intermediate_continuation): fix typo in comment.
* utils.c: <readline/readline.h> instead of "readline/readline.h".
* configure.in (TERM_LIB): Search for the appropriate term library
on the host system.
* configure: Regenerated.
* Makefile.in (TERMCAP): Set based on autoconf check.
* config/*/*.mh: Don't override TERMCAP setting.
* monitor.c (monitor_debug): Move to utils.c, rename to puts_debug.
(monitor_write_memory, monitor_read_memory, monitor_insert_breakpoint,
monitor_remove_breakpoint): Remove useless address bits if current
monitor has MO_ADDR_BITS_REMOVE flag.
* monitor.h (MO_ADDR_BITS_REMOVE): Define.
* utils.c (puts_debug): Formerly monitor_debug from monitor.c;
move here and make public. Add better support for carriage returns.
* defs.h (puts_debug): Declare.
* dsrec.c (load_srec): Use puts_debug to print remotedebug information.
Output header record correctly.
(make_srec): Output a header record instead of a termination record
if sect is non-NULL (value is ignored), but abfd is NULL.
* config/mips/tm-tx39.h (DEFAULT_MIPS_TYPE): Remove definition.
(REGISTER_NAMES): Define to add R3900-specific registers.
* config/mips/tm-tx39l.h: Ditto.
* config/mips/tx39.mt (TDEPFILES): Add dve3900-rom.o and support files.
* config/mips/tx39l.mt: Ditto.
that directory.
* defs.h utils.c (error warning): Make message be const.
* main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
to hook. Otherwise send it to fputs.
* monitor.c monitor.h (monitor_get_dev_name): New function. Does
the obvious.
* remote-e7000.c: Remove debugify stuff. Change printf, fprintf
to _filtered forms to make output appear in GUIs. Replace all
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
* (readchar): Improve doc. Handle random serial errors.
* (expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
* (e7000_parse_device): Remove serial_flag arg. It's not
necessary.
* (e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
* (gch): Remove debug output. That's handled by readchar.
* (e7000_read_inferior_memory): Handle errors better.
* (_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
* ser-e7kpc.c: Remove the last seven months of brain damage. Get
rid of the DLL's since we can access the device directly from Win32s
and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
serial_logchar. Clean up rest of routines.
* sparclet-rom.c: Disembowel. Leave only download routine.
Download routine now switches to remote target automatically.
* top.c (disconnect): Only define if SIGHUP is defined. Cleans
up MSVC/Win32 problem.
* utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
or gdb_stderr.
* config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
* config/sparc/tm-sparclet.h: Remove override for prompt.
config/mips/tm-mips.h: Add/fix bugs for 64-bit mips support.
* defs.h: Cleanup; add prototypess
* corefile.c: Change FIXME #ifdef
* win32-nat.c: Include windefs instead of windows.h.
* utils.c: Add routines for printing addresses and registers
based on type size.
and MMALLOC_CHECK macros, and add comment indicating how host dependent
makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
to use it but to not do heap corruption checking.
* gdbserver/Makefile.in: Ditto.
* utils.c (init_malloc): Replace warning() use with direct call of
fprintf_unfiltered, since current_target has not yet been set and thus
we cannot use warning(). If we try to use mmcheck and it fails,
suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
defined. Other small mmalloc related cleanups.
* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
Remove obsolete defines.
* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
* config/rs6000/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix.mh (MMALLOC_DISABLE):
* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
* config/mips/mipsm3.mh (MMALLOC_DISABLE):
* config/mips/decstation.mh (MMALLOC_DISABLE):
* config/m88k/cxux.mh (MMALLOC_DISABLE):
* config/i386/i386mk.mh (MMALLOC_DISABLE):
* config/i386/i386m3.mh (MMALLOC_DISABLE):
* config/i386/i386gnu.mh (MMALLOC_DISABLE):
Use MMALLOC_CFLAGS instead.
user can attach to a previously running program.
* (nindy_fetch_registers nindy_store_registers): Get rid of fp
conversion code. That's all handled in {extract store}_floating
now.
* utils.c (floatformat_to_double): Don't bias exponent when
handling zero's, denorms or NaNs.
* config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL
REGISTER_CONVERT_TO_RAW): Change to using DOUBLST and
FLOATFORMAT_TO/FROM_DOUBLEST macros.
* config/i960/tm-nindy960.h: Undefine
REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, and
REGISTER_CONVERTIBLE. These are no longer necessary now that all
the magic happens in extract/store_floating.
* (dcache_peek dcache_fetch dcache_poke): Make dcache_fetch and
dcache_poke call dcache_xfer_memory directly in order to fix
problems with turning off dcache. dcache_peek is now unnecessary,
so it goes away.
* defs.h: Define new macros HOST_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT
and TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT to specify a pointer
to a struct floatformat. This allows for better handling of
targets whose floating point formats differ from the host by more
than just byte order.
* (floatformat_to_long_double floatformat_from_long_double):
Prototypes for new functions in utils.c.
* (floatformat_to_doublest floatformat_from_doublest): Prototypes
for pointers to floating point conversion functions. The actual
function uses either double or long double if the host supports it.
* findvar.c (floatformat_to_doublest floatformat_from_doublest):
Initialize to point at correct function depending on HAVE_LONG_DOUBLE.
* (extract_floating store_floating): Rewrite. Now, if host fp
format is the same as the target, we just do a copy. Otherwise,
we call floatformat_{to from}_doublest.
* remote-nindy.c (nindy_xfer_inferior_memory): Change param
`write' to `should_write'.
* utils.c (floatformat_to_long_double
floatformat_from_long_double): New routines that implement long
double versions of functions in libiberty/floatformat.c.
* config/i960/tm-i960.h (TARGET_LONG_DOUBLE_FORMAT): Define this for
i960 extended real (80 bit) numbers.
* nindy-share/nindy.c (ninMemGet ninMemPut): Return number of bytes
actually read or written.
