By default, if a test driver (a test .exp) ends with an uncaught
error/exception, the runtest command will still have a return code of 0
(success). However, if a test (or the environment) is broken and does
not work properly, it should be considered as failed so that we can
notice it and fix it.
Passing the --status flag to runtest will make it return an error if one
of the test it runs ends up with an uncaught error.
gdb/testsuite/ChangeLog:
* Makefile.in (check-single): Pass --status to runtest.
(check/%.exp): Likewise.
When using the check-parallel target, the return code of make is always 0,
regardless of test results. This patch makes it return the same code as
the "make do-check-parallel" sub-command. So if there is a FAIL somewhere,
non-zero will be returned by make.
For the sake of example, I introduced a failure in gdb.base/break.exp.
$ make check-single TESTS="gdb.base/break.exp gdb.python/py-value.exp" && echo 'Success :D' || echo 'Fail :('
...
FAIL: gdb.base/break.exp: allo
...
Fail :(
I think the parallel run should do the same. Currently:
$ make check-parallel TESTS="gdb.base/break.exp gdb.python/py-value.exp" && echo 'Success :D' || echo 'Fail :('
...
FAIL: gdb.base/break.exp: allo
...
Success :D
And with the patch (no big surprises there):
$ make check-parallel TESTS="gdb.base/break.exp gdb.python/py-value.exp" && echo 'Success :D' || echo 'Fail :('
...
FAIL: gdb.base/break.exp: allo
...
Fail :(
What do you think?
gdb/testsuite/ChangeLog:
* Makefile.in (check-parallel): Propagate return code from make
do-check-parallel.
Currently, we always re-set all locations of all breakpoints. This
commit makes us re-set only locations of the current program space.
If we loaded symbols to a program space (e.g., "file" command or some
shared library was loaded), GDB must run through all breakpoints and
determine if any new locations need to be added to the breakpoint.
However, there's no reason to recreate locations for _other_ program
spaces, as those haven't changed.
Similarly, when we create a new inferior, through e.g., a fork, GDB
must run through all breakpoints and determine if any new locations
need to be added to the breakpoint. There's no reason to destroy the
locations of the parent inferior and other inferiors. We know those
won't change.
In addition to being inneficient, resetting breakpoints of inferiors
that are currently running is problematic, because:
- some targets can't read memory while the inferior is running.
- the inferior might exit while we're re-setting its breakpoints,
which may confuse prologue skipping.
I went through all the places where we call breakpoint_re_set, and it
seems to me that all can be changed to only re-set locations of the
current program space.
The patch that reversed threads order in "info threads" etc. happened
to make gdb.threads/fork-plus-thread.exp expose this problem when
testing on x86/-m32. The problem was latent and masked out by chance
by the code-cache:
https://sourceware.org/ml/gdb-patches/2016-01/msg00213.html
Tested on x86-64 F20, native (-m64/-m32) and extended-remote
gdbserver.
Fixes the regression discussed in the url above with --target_board=unix/-m32:
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left (timeout)
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (the program exited)
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
gdb/ChangeLog:
2016-01-19 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
* break-catch-throw.c (re_set_exception_catchpoint): Pass the
current program space down to linespec decoding and breakpoint
location updating.
* breakpoint.c (parse_breakpoint_sals): Adjust calls to
decode_line_full.
(until_break_command): Adjust calls to decode_line_1.
(base_breakpoint_decode_location, bkpt_decode_location): Add
'search_pspace' parameter. Pass it along.
(bkpt_probe_create_sals_from_location): Adjust calls to
parse_probes.
(tracepoint_decode_location, tracepoint_probe_decode_location)
(strace_marker_decode_location): Add 'search_pspace' parameter.
Pass it along.
(all_locations_are_pending): Rewrite to take a breakpoint and
program space as arguments instead.
(hoist_existing_locations): New function.
(update_breakpoint_locations): Add 'filter_pspace' parameter. Use
hoist_existing_locations instead of always removing all locations,
and adjust to all_locations_are_pending change.
(location_to_sals): Add 'search_pspace' parameter. Pass it along.
Don't disable the breakpoint if there are other locations in
another program space.
(breakpoint_re_set_default): Adjust to pass down the current
program space as filter program space.
(decode_location_default): Add 'search_pspace' parameter and pass
it along.
(prepare_re_set_context): Don't switch program space here.
(breakpoint_re_set): Use save_current_space_and_thread instead of
save_current_program_space.
* breakpoint.h (struct breakpoint_ops) <decode_location>: Add
'search_pspace' parameter.
(update_breakpoint_locations): Add 'filter_pspace' parameter.
* cli/cli-cmds.c (edit_command, list_command): Adjust calls to
decode_line_1.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
program space as filter program space.
* linespec.c (struct linespec_state) <search_pspace>: New field.
(create_sals_line_offset, convert_explicit_location_to_sals)
(parse_linespec): Pass the search program space down.
(linespec_state_constructor): Add 'search_pspace' parameter.
Store it.
(linespec_parser_new): Add 'search_pspace' parameter and pass it
along.
(linespec_lex_to_end): Adjust.
(decode_line_full, decode_line_1): Add 'search_pspace' parameter
and pass it along.
(decode_line_with_last_displayed): Adjust.
(collect_symtabs_from_filename, symtabs_from_filename): New
'search_pspace' parameter. Use it.
(find_function_symbols): Pass the search program space down.
* linespec.h (decode_line_1, decode_line_full): Add
'search_pspace' parameter.
* probe.c (parse_probes_in_pspace): New function, factored out
from ...
(parse_probes): ... this. Add 'search_pspace' parameter and use
it.
* probe.h (parse_probes): Add pspace' parameter.
* python/python.c (gdbpy_decode_line): Adjust.
* tracepoint.c (scope_info): Adjust.
This is fallout from f303dbd60d.
The testcases themselves are single-threaded, but they load the IPA library,
which injects a thread in the inferior - making them multithreaded.
This results in printing the thread numbers in breakpoint messages.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Fix expected message on continue.
* gdb.trace/pending.exp: Fix expected message on continue.
* gdb.trace/trace-break.exp: Fix expected message on continue.
Those are unused since gdb_test_multiple was added, factoring out most
of the content of gdb_test.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_test): Remove unused global references.
This commit changes GDB like this:
- Program received signal SIGINT, Interrupt.
+ Thread 1 "main" received signal SIGINT, Interrupt.
- Breakpoint 1 at 0x40087a: file threads.c, line 87.
+ Thread 3 "bar" hit Breakpoint 1 at 0x40087a: file threads.c, line 87.
... once the program goes multi-threaded. Until GDB sees a second
thread spawn, the output is still the same as before, per the
discussion back in 2012:
https://www.sourceware.org/ml/gdb/2012-11/msg00010.html
This helps non-stop mode, where you can't easily tell which thread hit
a breakpoint or received a signal:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 19362) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 19366) "foo" (running)
3 Thread 0x7ffff77bf700 (LWP 19367) "bar" (running)
(gdb)
Program received signal SIGUSR1, User defined signal 1.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
(gdb) b threads.c:87
Breakpoint 1 at 0x40087a: file threads.c, line 87.
(gdb)
Breakpoint 1, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
The best the user can do is run "info threads" and try to figure
things out.
It actually also affects all-stop mode, in case of "handle SIG print
nostop":
...
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
...
The above doesn't give any clue that these were different threads
getting the SIGUSR1 signal.
I initially thought of lowercasing "breakpoint" in
"Thread 3 hit Breakpoint 1"
but then after trying it I realized that leaving "Breakpoint"
uppercase helps the eye quickly find the relevant information. It's
also easier to implement not showing anything about threads until the
program goes multi-threaded this way.
Here's a larger example session in non-stop mode:
(gdb) c -a&
Continuing.
(gdb) interrupt -a
(gdb)
Thread 1 "main" stopped.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
Thread 2 "foo" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
Thread 3 "bar" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
b threads.c:87
Breakpoint 4 at 0x40087a: file threads.c, line 87.
(gdb) b threads.c:67
Breakpoint 5 at 0x400811: file threads.c, line 67.
(gdb) c -a&
Continuing.
(gdb)
Thread 3 "bar" hit Breakpoint 4, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
Thread 2 "foo" hit Breakpoint 5, thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) shell kill -SIGINT 31957
(gdb)
Thread 1 "main" received signal SIGINT, Interrupt.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" 0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) t 2
[Switching to thread 2, Thread 0x7ffff7fc0700 (LWP 31961)]
#0 thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
(gdb) catch syscall
Catchpoint 6 (any syscall)
(gdb) c&
Continuing.
(gdb)
Thread 2 "foo" hit Catchpoint 6 (call to syscall nanosleep), 0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
I'll work on documentation next if this looks agreeable.
This patch applies on top of the star wildcards thread IDs series:
https://sourceware.org/ml/gdb-patches/2016-01/msg00291.html
For convenience, I've pushed this to the
users/palves/show-which-thread-caused-stop branch.
gdb/doc/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Mention that GDB displays the ID and name
of the thread that hit a breakpoint or received a signal.
gdb/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* NEWS: Mention that GDB now displays the ID and name of the
thread that hit a breakpoint or received a signal.
* break-catch-sig.c (signal_catchpoint_print_it): Use
maybe_print_thread_hit_breakpoint.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
(print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
(print_it_catch_exec, print_it_ranged_breakpoint)
(print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
Use maybe_print_thread_hit_breakpoint.
* breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
* gdbthread.h (show_thread_that_caused_stop): Declare.
* infrun.c (print_signal_received_reason): Print which thread
received signal.
* thread.c (show_thread_that_caused_stop): New function.
gdb/testsuite/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.base/async-shell.exp: Adjust expected output.
* gdb.base/dprintf-non-stop.exp: Adjust expected output.
* gdb.base/siginfo-thread.exp: Adjust expected output.
* gdb.base/watchpoint-hw-hit-once.exp: Adjust expected output.
* gdb.java/jnpe.exp: Adjust expected output.
* gdb.threads/clone-new-thread-event.exp: Adjust expected output.
* gdb.threads/continue-pending-status.exp: Adjust expected output.
* gdb.threads/leader-exit.exp: Adjust expected output.
* gdb.threads/manythreads.exp: Adjust expected output.
* gdb.threads/pthreads.exp: Adjust expected output.
* gdb.threads/schedlock.exp: Adjust expected output.
* gdb.threads/siginfo-threads.exp: Adjust expected output.
* gdb.threads/signal-command-multiple-signals-pending.exp: Adjust
expected output.
* gdb.threads/signal-delivered-right-thread.exp: Adjust expected
output.
* gdb.threads/sigthread.exp: Adjust expected output.
* gdb.threads/watchpoint-fork.exp: Adjust expected output.
The ARM assembler has "@" as a comment character, so there are compile
errors in {py,scm}-section-script.c,
gdb compile failed, /tmp/ccHEzYqy.s: Assembler messages:
/tmp/ccHEzYqy.s:19: Error: junk at end of line, first unrecognized character is `,'
/tmp/ccHEzYqy.s:24: Error: junk at end of line, first unrecognized character is `,'
/tmp/ccHEzYqy.s:29: Error: junk at end of line, first unrecognized character is `,'
/tmp/ccHEzYqy.s:41: Error: junk at end of line, first unrecognized character is `,'
This patch replaces @progbits with %progbits.
gdb/testsuite:
2016-01-18 Yao Qi <yao.qi@linaro.org>
* gdb.guile/scm-section-script.c: Replace @progbits with
%progbits.
* gdb.python/py-section-script.c: Likewise.
Add support for specifying "all threads of inferior N", by writing "*"
as thread number/range in thread ID lists.
E.g., "info threads 2.*" or "thread apply 2.* bt".
gdb/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* NEWS: Mention star wildcard ranges.
* cli/cli-utils.c (get_number_or_range): Check state->in_range first.
(number_range_setup_range): New function.
* cli/cli-utils.h (number_range_setup_range): New declaration.
* thread.c (thread_apply_command): Support star TID ranges.
* tid-parse.c (tid_range_parser_finished)
(tid_range_parser_string, tid_range_parser_skip)
(get_tid_or_range, get_tid_or_range): Handle
TID_RANGE_STATE_STAR_RANGE.
(tid_range_parser_star_range): New function.
* tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
New value.
(tid_range_parser_star_range): New declaration.
gdb/doc/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads) <thread ID lists>: Document star ranges.
gdb/testsuite/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* gdb.multi/tids.exp: Test star wildcard ranges.
This fixes a few bugs in "thread apply".
While this works:
(gdb) thread apply 1 p 1234
Thread 1 (Thread 0x7ffff7fc1740 (LWP 14048)):
$1 = 1234
This doesn't:
(gdb) thread apply $thr p 1234
Thread 1 (Thread 0x7ffff7fc1740 (LWP 12039)):
Invalid thread ID: p 1234
(gdb)
~~~~
Also, while this works:
(gdb) thread apply 1
Please specify a command following the thread ID list
This doesn't:
(gdb) thread apply $thr
Thread 1 (Thread 0x7ffff7fc1740 (LWP 12039)):
[Current thread is 1 (Thread 0x7ffff7fc1740 (LWP 12039))]
(gdb)
~~~~
And, while this works:
(gdb) thread apply
Please specify a thread ID list
This obviously bogus invocation is just silent:
(gdb) thread apply bt
(gdb)
gdb/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* thread.c (thread_apply_command): Use the tid range parser to
advance past the thread ID list.
* tid-parse.c (get_positive_number_trailer): New function.
(parse_thread_id): Use it.
(get_tid_or_range): Use it. Return 0 instead of throwing invalid
thread ID error.
(get_tid_or_range): Detect negative values. Return 0 instead of
throwing invalid thread ID error.
gdb/testsuite/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* gdb.multi/tids.exp (thr_apply_info_thr_error): Remove "p 1234"
command from "thread apply" invocation.
(thr_apply_info_thr_invalid): Default the expected output to the
input tid list.
(top level): Add tests that use convenience variables. Add tests
for "thread apply" with a valid TID list, but missing the command.
This commit adds a new $_gthread convenience variable, that is like
$_thread, but holds the current thread's global thread id.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention $_gthread.
* gdbthread.h (struct thread_info) <global_num>: Mention
$_gthread.
* thread.c (thread_num_make_value_helper): New function.
(thread_id_make_value): Delete.
(thread_id_per_inf_num_make_value, global_thread_id_make_value):
New.
(thread_funcs): Adjust.
(gthread_funcs): New.
(_initialize_thread): Register $_gthread variable.
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.base/default.exp: Expect $_gthread as well.
* gdb.multi/tids.exp: Test $_gthread.
* gdb.threads/thread-specific.exp: Test $_gthread.
gdb/doc/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document the $_gthread convenience
variable.
(Convenience Vars): Likewise.
This commit adds a new Python InferiorThread.global_num attribute.
This can be used to pass the correct thread ID to Breakpoint.thread,
which takes a global thread ID, not a per-inferior thread number.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention InferiorThread.global_num.
* python/py-infthread.c (thpy_get_global_num): New function.
(thread_object_getset): Register "global_num".
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.multi/tids.exp: Test InferiorThread.global_num and
Breakpoint.thread.
* gdb.python/py-infthread.exp: Test InferiorThread.global_num.
gdb/doc/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* python.texi (Breakpoints In Python) <Breakpoint.thread>: Add
anchor.
(Threads In Python): Document new InferiorThread.global_num
attribute.
This commit changes GDB to track thread numbers per-inferior. Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:
(gdb) info inferiors
Num Description Executable
1 process 6022 /home/pedro/gdb/tests/threads
* 2 process 6037 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
* 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
(gdb)
...
(gdb) thread 1.1
[Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
(gdb)
...
etc.
You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.
The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number. It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.
Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs. IOW, nothing
changes from a MI frontend's perspective.
Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too. Follow up patches will provide convenient means to access
threads' global IDs.
To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown. E.g,.:
(gdb) info inferiors
Num Description Executable
* 1 process 15275 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb) add-inferior
Added inferior 2
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb)
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
gdb/testsuite/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.base/break.exp: Adjust to output changes.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.linespec/keywords.exp: Likewise.
* gdb.multi/info-threads.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.multi/tids.c: New file.
* gdb.multi/tids.exp: New file.
gdb/doc/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document per-inferior thread IDs,
qualified thread IDs, global thread IDs and thread ID lists.
(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
thread IDs.
(Convenience Vars): Document the $_thread convenience variable.
(Ada Tasks): Adjust to refer to thread IDs.
(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
Commands, GDB/MI Variable Objects): Update to mention global
thread IDs.
* guile.texi (Breakpoints In Guile)
<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
global thread IDs instead of thread IDs.
* python.texi (Threads In Python): Adjust documentation of
InferiorThread.num.
(Breakpoint.thread): Mention global thread IDs instead of thread
IDs.
So a script can easily get at a thread's inferior and its number.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention InferiorThread.inferior.
* python/py-infthread.c (thpy_get_inferior): New.
(thread_object_getset): Register "inferior".
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* gdb.python/py-infthread.exp: Test InferiorThread.inferior.
gdb/doc/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* python.texi (Threads In Python): Document
InferiorThread.inferior.
This commit merges both the registers and $_siginfo "thread
running/executing" checks into a single function.
Accessing $_siginfo from a "catch signal" breakpoint condition doesn't
work. The condition always fails with "Selected thread is running":
(gdb) catch signal
Catchpoint 3 (standard signals)
(gdb)
condition $bpnum $_siginfo.si_signo == 5
(gdb) continue
Continuing.
Error in testing breakpoint condition:
Selected thread is running.
Catchpoint 3 (signal SIGUSR1), 0x0000003615e35877 in __GI_raise (sig=10) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
(gdb)
When accessing the $_siginfo object, we check whether the thread is
marked running (external/public) state and refuse the access if so.
This is so "print $_siginfo" at the prompt fails nicelly when the
current thread is running. While evaluating breakpoint conditionals,
we haven't decided yet whether the thread is going to stop, so
is_running still returns true, and we thus always error out.
Evaluating an expression that requires registers access is really
conceptually the same -- we could think of $_siginfo as a pseudo
register. However, in that case we check whether the thread is marked
executing (internal/private state), not running (external/public
state). Changing the $_siginfo validation to check is_executing as
well fixes the bug in question.
Note that checking is_executing is not fully correct, not even for
registers. See PR 19389. However, I think this is the lesser of two
evils and ends up as an improvement. We at least now have a single
place to fix.
Tested on x86_64 GNU/Linux.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
PR breakpoints/19388
* frame.c (get_current_frame): Use validate_registers_access.
* gdbthread.h (validate_registers_access): Declare.
* infrun.c (validate_siginfo_access): Delete.
(siginfo_value_read, siginfo_value_write): Use
validate_registers_access.
* thread.c (validate_registers_access): New function.
gdb/testsuite/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
PR breakpoints/19388
* gdb.base/catch-signal-siginfo-cond.c: New file.
* gdb.base/catch-signal-siginfo-cond.exp: New file.
This adds a new QCatchSyscalls packet to enable 'catch syscall', and new
stop reasons "syscall_entry" and "syscall_return" for those events. It
is currently only supported on Linux x86 and x86_64.
gdb/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
syscall_entry and syscall_return stop reasons. Mention GDB
support for remote catch syscall.
* remote.c (PACKET_QCatchSyscalls): New enum.
(remote_set_syscall_catchpoint): New function.
(remote_protocol_features): New element for QCatchSyscalls.
(remote_parse_stop_reply): Parse syscall_entry/return stops.
(init_remote_ops): Install remote_set_syscall_catchpoint.
(_initialize_remote): Config QCatchSyscalls.
* linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
gdb/doc/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Remote Configuration): List the QCatchSyscalls packet.
(Stop Reply Packets): List the syscall entry and return stop reasons.
(General Query Packets): Describe QCatchSyscalls, and add it to the
table and the detailed list of stub features.
gdb/gdbserver/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* inferiors.h: Include "gdb_vecs.h".
(struct process_info): Add syscalls_to_catch.
* inferiors.c (remove_process): Free syscalls_to_catch.
* remote-utils.c (prepare_resume_reply): Report syscall_entry and
syscall_return stops.
* server.h (UNKNOWN_SYSCALL, ANY_SYSCALL): Define.
* server.c (handle_general_set): Handle QCatchSyscalls.
(handle_query): Report support for QCatchSyscalls.
* target.h (struct target_ops): Add supports_catch_syscall.
(target_supports_catch_syscall): New macro.
* linux-low.h (struct linux_target_ops): Add get_syscall_trapinfo.
(struct lwp_info): Add syscall_state.
* linux-low.c (handle_extended_wait): Mark syscall_state as an entry.
Maintain syscall_state and syscalls_to_catch across exec.
(get_syscall_trapinfo): New function, proxy to the_low_target.
(linux_low_ptrace_options): Enable PTRACE_O_TRACESYSGOOD.
(linux_low_filter_event): Toggle syscall_state entry/return for
syscall traps, and set it ignored for all others.
(gdb_catching_syscalls_p): New function.
(gdb_catch_this_syscall_p): New function.
(linux_wait_1): Handle SYSCALL_SIGTRAP.
(linux_resume_one_lwp_throw): Add PTRACE_SYSCALL possibility.
(linux_supports_catch_syscall): New function.
(linux_target_ops): Install it.
* linux-x86-low.c (x86_get_syscall_trapinfo): New function.
(the_low_target): Install it.
gdb/testsuite/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/catch-syscall.c (do_execve): New variable.
(main): Conditionally trigger an execve.
* gdb.base/catch-syscall.exp: Enable testing for remote targets.
(test_catch_syscall_execve): New, check entry/return across execve.
(do_syscall_tests): Call test_catch_syscall_execve.
This exposes the issued fixed by 2f99e8fc9c:
https://sourceware.org/ml/gdb-patches/2015-12/msg00423.html
to native debugging as well.
gdb/testsuite/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
* gdb.base/random-signal.exp (do_test): New procedure, with body
of testcase moved in.
(top level) Call it twice, once with "run" and once with "attach".
[This reapplies a change that was accidentally reverted with c0ecb95f3d.]
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
3ca22649a6 is the first bad commit
commit 3ca22649a6
Author: Simon Marchi <simon.marchi@polymtl.ca>
Date: Mon Dec 21 12:51:54 2015 -0500
Remove HP-UX references fom testsuite
@@ -1013,13 +1013,6 @@ proc localvars_in_indirect_call { } {
#
gdb_test_multiple "finish" "finish from indirectly called function" {
- -re "\\(\\*pointer_to_call0a\\) \\(c, s, i, l\\);.*First.*$gdb_prompt $" {
- #On hppa2.0w-hp-hpux11.00, gdb finishes at one line earlier than
- #hppa1.1-hp-hpux11.00. Therefore, an extra "step" is necessary
- #to continue the test.
- send_gdb "step\n"
- exp_continue
- }
-re ".*\\(\\*pointer_to_call0a\\) \\(c, s, i, l\\);.*Second.*$gdb_prompt $" {
pass "finish from indirectly called function"
}
->
finish^M
Run till exit from #0 call0a (c=97 'a', s=1, i=2, l=3) at ./gdb.base/funcargs.c:82^M
0x0804a189 in main () at ./gdb.base/funcargs.c:583^M
583 (*pointer_to_call0a) (c, s, i, l); /* First step into call0a. */^M
-(gdb) step^M
-584 (*pointer_to_call0a) (c, s, i, l); /* Second step into call0a. */^M
-(gdb) PASS: gdb.base/funcargs.exp: finish from indirectly called function
+(gdb) FAIL: gdb.base/funcargs.exp: finish from indirectly called function
step^M
-call0a (c=97 'a', s=1, i=2, l=3) at ./gdb.base/funcargs.c:82^M
-82 c = 'a';^M
-(gdb) PASS: gdb.base/funcargs.exp: stepping into indirectly called function
+584 (*pointer_to_call0a) (c, s, i, l); /* Second step into call0a. */^M
+(gdb) FAIL: gdb.base/funcargs.exp: stepping into indirectly called function
At least on x86_64 with testsuite in -m32 (expecting native i386 would be the
same).
Pedro Alves:
The difference is that with newer GCC there's an extra instruction
after the call which is still assigned to line 583:
$ diff -up /tmp/4.8.3 /tmp/6.0.0 -U 1000
--- /tmp/4.8.3 2016-01-11 12:37:39.611089156 +0000
+++ /tmp/6.0.0 2016-01-11 13:21:00.021127976 +0000
@@ -1,27 +1,30 @@
583 (*pointer_to_call0a) (c, s, i, l); /* First step into call0a. */
mov 0x804d060,%ebx
mov 0x804d050,%ecx
movzwl 0x804d040,%eax
movswl %ax,%edx
movzbl 0x804d030,%eax
movsbl %al,%eax
- mov %ebx,0xc(%esp)
- mov %ecx,0x8(%esp)
- mov %edx,0x4(%esp)
- mov %eax,(%esp)
- mov 0x7c(%esp),%eax
+ push %ebx
+ push %ecx
+ push %edx
+ push %eax
+ mov -0x1c(%ebp),%eax
call *%eax
+ add $0x10,%esp
584 (*pointer_to_call0a) (c, s, i, l); /* Second step into call0a. */
mov 0x804d060,%ebx
mov 0x804d050,%ecx
movzwl 0x804d040,%eax
movswl %ax,%edx
movzbl 0x804d030,%eax
movsbl %al,%eax
- mov %ebx,0xc(%esp)
- mov %ecx,0x8(%esp)
- mov %edx,0x4(%esp)
- mov %eax,(%esp)
- mov 0x7c(%esp),%eax
+ push %ebx
+ push %ecx
+ push %edx
+ push %eax
+ mov -0x1c(%ebp),%eax
call *%eax
+ add $0x10,%esp
+
I don't know why -m32 changed to push/add instead of mov while 64-bit hasn't.
This is most likely needed on non-x86 ports as well.
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/funcargs.exp (finish from indirectly called function):
Reintroduce the case for 'First'.
fe33faff35 is the first bad commit
commit fe33faff35
Author: Simon Marchi <simon.marchi@ericsson.com>
Date: Tue Dec 22 10:52:31 2015 -0500
Remove HP-UX reference in foll-vfork.exp
FAIL: gdb.base/foll-vfork.exp: exec: vfork parent follow, finish after tcatch vfork: continue to vfork
FAIL: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: continue to vfork
FAIL: gdb.base/foll-vfork.exp: exit: vfork parent follow, finish after tcatch vfork: continue to vfork
FAIL: gdb.base/foll-vfork.exp: exit: vfork child follow, finish after tcatch vfork: continue to vfork
It happens for plain gdb.base/foll-vfork.exp runtest on Fedora 23 x86_64.
-Temporary catchpoint 2 (vforked process 24562), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
+Temporary catchpoint 2 (vforked process 25345), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
52 pushq %rdi^M
Current language: auto^M
The current source language is "auto; currently asm".^M
-(gdb) PASS: gdb.base/foll-vfork.exp: exec: vfork parent follow, finish after tcatch vfork: continue to vfork
+(gdb) FAIL: gdb.base/foll-vfork.exp: exec: vfork parent follow, finish after tcatch vfork: continue to vfork
-Temporary catchpoint 2 (vforked process 24629), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
+Temporary catchpoint 2 (vforked process 25411), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
52 pushq %rdi^M
Current language: auto^M
The current source language is "auto; currently asm".^M
-(gdb) PASS: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: continue to vfork
+(gdb) FAIL: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: continue to vfork
So I have reverted it and just simplified the comment.
The third case is not necessary during testing but I have changed back all the
3 cases.
Pedro Alves:
I know it was that way before, but would you mind moving this to a helper
proc.
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/foll-vfork.exp (tcatch_vfork_then_parent_follow)
(tcatch_vfork_then_child_follow_exec)
(tcatch_vfork_then_child_follow_exit): Revert back DWARF vfork
identification.
I was getting
gu (print arg0)^M
= 0x7fffffffdafb
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.guile/scm-value/scm-"...^M
(gdb) FAIL: gdb.guile/scm-value.exp: verify dereferenced value
python print (arg0)^M
0x7fffffffdafd
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.python/py-value/py-v"...^M
(gdb) FAIL: gdb.python/py-value.exp: verify dereferenced value
and also:
(gdb) p argv[0]^M
$2 = 0x7fffffffd832 "/home/jkratoch/redhat/gdb-test-", 'x' <repeats 169
times>...^M
(gdb) FAIL: gdb.guile/scm-value.exp: argv[0] should be available on this
target
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.guile/scm-value.exp (test_value_in_inferior): Set print elements
and repeats to unlimited.
* gdb.python/py-value.exp: Likewise.
* lib/gdb.exp (gdb_has_argv0): Save and temporarily set print elements
and repeats to unlimited.
Regressed by:
commit 762f774785
Author: Pedro Alves <palves@redhat.com>
Date: Thu Dec 10 16:21:06 2015 +0000
Stop using nowarnings in gdb/testsuite/gdb.multi/
+gdb compile failed, gdb/testsuite/gdb.multi/hello.c: In function 'commonfun':
+gdb/testsuite/gdb.multi/hello.c:24:19: warning: implicit declaration of function 'bar' [-Wimplicit-function-declaration]
+ int commonfun() { bar(); } /* from hello */
+ ^
+gdb/testsuite/gdb.multi/hello.c: At top level:
+gdb/testsuite/gdb.multi/hello.c:26:1: warning: return type defaults to 'int' [-Wimplicit-int]
+ bar()
+ ^
+gdb/testsuite/gdb.multi/hello.c:32:1: warning: return type defaults to 'int' [-Wimplicit-int]
+ hello(int x)
+ ^
+gdb/testsuite/gdb.multi/hello.c:38:1: warning: return type defaults to 'int' [-Wimplicit-int]
+ main()
+ ^
+UNTESTED: gdb.multi/base.exp: base.exp
gdb/testsuite/ChangeLog
2016-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.multi/goodbye.c: Fix compilation warnings by adding return types
and reordering the functions.
* gdb.multi/hangout.c: Likewise.
* gdb.multi/hello.c: Likewise.
There are a few errors when trying to run the performance testsuite with
Python 3. This commit fixes them.
In Python 2, it was possible to use relative imports (importing a module
relative to the current one). In Python 3 it isn't. So I use
absolute_import from the __future__ module, which allows Python 2 to
behave like Python 3, and use the Python 3 syntax.
In Python 3, dict.iterkeys doesn't exist anymore. Using dict.keys is a
good compromise in this case.
gdb/testsuite/ChangeLog:
* gdb.perf/lib/perftest/perftest.py: Change relative imports to
absolute.
(SingleStatisticTestResult.report): Use dict.keys instead of
dict.iterkeys.
In btrace_pt_readmem_callback, we read memory inside TRY/CATCH and return in
case of an error return value. This corrupts the cleanup chain, which
eventually results in a SEGV when doing or discarding cleanups later on.
gdb/
* btrace.c (btrace_pt_readmem_callback): Do not return in TRY/CATCH.
testsuite/
* gdb.btrace/dlopen.exp: New.
* gdb.btrace/dlopen.c: New.
* gdb.btrace/dlopen-dso.c: New.
2015-12-25 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* lib/gdb.exp (gdb_test): Update comments to clarify that the
PATTERN argument is optional.
The current approach when building Ada programs for testing is
based on the use of a project file (testsuite/gdb.ada/gnat_ada.gpr).
To do that, we pass a number of additional arguments to target_compile,
one of them being the project file (via "-P/path/to/gnat_ada.gpr").
This used to work well-enough, but AdaCore is currently working towards
removing project-file support from gnatmake (the prefered tool for
using project files is gprbuild). So, we need to either switch
the compilation to gprbuild, or stop using project files.
First, using gprbuild is not always what users will be using to
build their applications. So having the option of using gnatmake
provides more flexibility towards exactly reproducing past bugs.
If we ever need a testcase that requires the use of gprbuild, then
I believe support for a new target needs to be added to dejagnu's
target_compile.
Also, the only real reason behind using a project file in the first
place is that we wanted to make it easy to specify the directory
where all compilation artifacts get stored. This is a consequence
of the organization choice we made for gdb.ada to keep each testcase
well organized. It is very easy to achieve that goal without using
project files.
This is therefore what this patch does: It change gdb_compile_ada
to build any program using gnatmake without using a project file
(by temporarily changing the current working directory).
There is a small (beneficial) side-effect; in the situation where
GDB is built in-tree, gnatmake is called as...
% gnatmake [...] unit.adb
... which means that the debugging info in unit.o will say contain
a filename whose name is 'unit.adb', rather than '/path/to/unit.adb'.
This also better matches what users might typically do. But the side-
effect is that the unit name in the GDB output is not always a full
path. This patch tweaks a couple of testcases to make the path part
optional.
gdb/testsuite:
* lib/ada.exp (target_compile_ada_from_dir): New function.
(gdb_compile_ada): Reimplement avoiding the use of project files.
* gdb.ada/gnat_ada.gpr: Delete.
* gdb.ada/cond_lang.exp: Adjust test to make path before
filename optional.
* gdb.ada/small_reg_param.exp: Likewise.
Tested on x86_64-linux, with both in-tree and out-of-tree builds.
One more I just found.
Tested with native, native-gdbserver and native-extended-gdbserver on
Linux.
gdb/testsuite/ChangeLog:
* gdb.base/foll-vork.exp: Remove HP-UX special case.
This patch removes cases from the testsuite that are not posssibly used. The
messages "Catch of * not yet implemented" were removed here:
https://www.sourceware.org/ml/gdb-patches/2004-01/msg00679.html
I changed the regexp at the same time to match the string more closely.
gdb/testsuite/ChangeLog:
* gdb.base/break.exp: Remove dead code.
* gdb.base/sepdebug.exp: Likewise.
This patch removes all special cases for HP-UX, for which support has
been removed earlier, that I found in the testsuite. Note that the hppa
architecture != HP-UX, since other OSes can run on hppa, so I tried to
leave everything that is not HP-UX specific.
Two complete tests were completely HP-UX specific, so I removed them.
I ran the testsuite on Linux x86-64, native and native-gdbserver, and
noticed no regressions.
gdb/testsuite/ChangeLog:
* gdb.asm/asm-source.exp: Remove HP-UX references.
* gdb.base/annota1.exp: Likewise.
* gdb.base/annota3.exp: Likewise.
* gdb.base/attach.exp: Likewise.
* gdb.base/bigcore.exp: Likewise.
* gdb.base/break.exp: Likewise.
* gdb.base/call-ar-st.exp: Likewise.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/catch-fork-static.exp: Likewise.
* gdb.base/display.exp: Likewise.
* gdb.base/foll-exec-mode.exp: Likewise.
* gdb.base/foll-exec.exp: Likewise.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/inferior-died.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/solib1.c: Likewise.
* gdb.base/step-test.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.multi/bkpt-multi-exec.ex: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/staticthreads.exp: Likewise.
* lib/future.exp: Likewise.
* lib/gdb.exp: Likewise.
* gdb.base/so-indr-cl.c: Remove.
* gdb.base/so-indr-cl.exp: Likewise.
* gdb.base/solib.c: Likewise.
* gdb.base/solib.exp: Likewise.
* gdb.base/solib2.c: Likewise.
This patch adds some documentation to gdb_compile. It describes the
various options that can influence compilation. Most of them are
handled by DejaGnu, but are not really documented anywhere, so I think
it's good to have a quick reference. Not all possible options are
described, that would add way to much noise. I chose those that I think
are relevant in the context of writing a test case.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_compile): Add function doc.
Note: this applies on top of:
[PATCH] Remove support for LinuxThreads and vendor 2.4 kernels w/ backported NPTL
https://sourceware.org/ml/gdb-patches/2015-12/msg00214.html
We try to avoid using libthread_db.so to list threads in the inferior
when debugging live processes, but the code that decides whether to
use it decides incorrectly if you have more than one inferior, and the
current inferior doesn't have execution yet. The result is visible
as:
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 15397 /home/pedro/gdb/tests/threads
* 2 <null>
(gdb) info threads
Cannot find new threads: generic error
(gdb)
Fix this by checking whether each inferior has execution rather than
just the current inferior.
By moving the core updating to linux-nat.c's update_thread_list
implementation, this also ends up fixing the
lwp-last-seen-running-on-core updating in the case we're debugging a
program that uses raw clone rather than pthreads, as linux-thread-db.c
isn't pushed in the target stack in that scenario.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-12-17 Pedro Alves <palves@redhat.com>
PR threads/19354
* linux-nat.c (linux_nat_update_thread_list): Update process cores
each lwp was last seen running on here.
* linux-thread-db.c (update_thread_core): Delete.
(thread_db_update_thread_list_td_ta_thr_iter): Rename to ...
(thread_db_update_thread_list): ... this. Skip inferiors with
execution. Also call the target beneath.
(thread_db_update_thread_list): Delete.
gdb/testsuite/ChangeLog:
2015-12-17 Pedro Alves <palves@redhat.com>
PR threads/19354
* gdb.multi/info-threads.exp: New file.
Some tests are skipped on aarch64 unexpectedly because arg0exp isn't
set. This patch is to set arg0exp to "$x0" for aarch64.
gdb/testsuite:
2015-12-15 Yao Qi <yao.qi@linaro.org>
* gdb.trace/ftrace.exp: Set arg0exp to "$x0" if target
is aarch64*-*-*.
This patch updates tests for fork and exec events in target remote mode.
In the majority of cases this was a simple matter of removing some code
that disabled the test for target remote. In a few cases the test needed
to be disabled; in those cases the gdb_protocol was checked instead of
using the [is_remote target] etc.
In a couple of cases we needed to use clean_restart, since target remote
doesn't support the run command, and in one case we had to modify an expect
expression to allow for a "multiprocess-style" ptid.
Tested with the patch that implemented target remote mode fork and exec
event support.
gdb/testsuite/ChangeLog:
* gdb.base/execl-update-breakpoints.exp (main): Enable for target
remote.
* gdb.base/foll-exec-mode.exp (main): Disable for target remote.
* gdb.base/foll-exec.exp (main): Enable for target remote.
* gdb.base/foll-fork.exp (main): Likewise.
* gdb.base/foll-vfork.exp (main): Likewise.
* gdb.base/multi-forks.exp (main): Likewise, and use clean_restart.
(proc continue_to_exit_bp_loc): Use clean_restart.
* gdb.base/pie-execl.exp (main): Disable for target remote.
* gdb.base/watch-vfork.exp (main): Enable for target remote.
* gdb.mi/mi-nsthrexec.exp (main): Likewise.
* gdb.threads/execl.exp (main): Likewise.
* gdb.threads/fork-child-threads.exp (main): Likewise.
* gdb.threads/fork-plus-threads.exp (main): Disable for target
remote.
* gdb.threads/fork-thread-pending.exp (main): Enable for target
remote.
* gdb.threads/linux-dp.exp (check_philosopher_stack): Allow
pid.tid style ptids, instead of just tid.
* gdb.threads/thread-execl.exp (main): Enable for target remote.
* gdb.threads/watchpoint-fork.exp (main): Likewise.
* gdb.trace/report.exp (use_collected_data): Allow pid.tid style
ptids, instead of just tid.
When a a user uses 'list +' to list forward through a source file they
eventually reach the end of the source file. Subsequent uses of 'list
+' result in an error message like this, that let the user know they are
at the end of the source file:
Line number XXX out of range; FILENAME has YYY lines.
Compare this to the current behaviour of 'list -' which lists backwards
through a source file. When the user reaches the beginning of the
source file, subsequent uses of 'list -' result in the command silently
returning. This can be confusing if the previous uses of 'list -' have
scrolled off the users display, the user receives no reminder that the
have already seen the start of the file.
After this commit a use of 'list -' when the user has already seen the
start of a file will receive the following error:
Already at the start of FILENAME.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Add an error when trying to use
'-' to scan read off the start of the source file.
gdb/testsuite/ChangeLog:
* gdb.base/list.exp (test_list_forward): Add end of file error
test.
(test_repeat_list_command): Add end of file error test.
(test_list_backwards): Add beginning of file error test.
There is an inconsistency with the handling of the special +/- arguments
to the list command.
For the very first time that list is used (after the inferior has
changed locations) then only the first character of the argument string
is checked, so 'list +BLAH' will operate as 'list +' and 'list -----FOO'
will operate as 'list -'. This compares to each subsequent use of list,
where the whole argument string is checked, so 'list +BLAH' will try to
list lines of code around the function '+BLAH'.
This commit unifies the behaviour so that the whole argument string is
checked, in order to list the next 10, or previous 10 lines from a file
only 'list +' and 'list -' are now valid.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Check that the argument string is
a single character, either '+' or '-'.
gdb/testsuite/ChangeLog:
* gdb.base/list.exp (test_list_invalid_args): New function,
defined, and called.
I happen to find that coremaker2.c isn't used in the testsuite (if I
don't miss anything). I don't believe it until I see this ChangeLog
entry,
1999-11-18 Fred Fish <fnf@cygnus.com>
* gdb.base/coremaker2.c: Add sample program for generating
cores that is more self contained than coremaker.c. Eventually
I'll add more code to this and tie it into the testsuite.
looks Fred didn't "tie it into testsuite" later.
gdb/testsuite:
2015-12-11 Yao Qi <yao.qi@linaro.org>
* gdb.base/coremaker2.c: Remove.
I think these references to "spaces" came from the original multi-exec
submission that exposed "symbol spaces" to the user and had a
different UI, and then survived a global find/replace.
gdb/testsuite/ChangeLog:
2015-12-10 Pedro Alves <palves@redhat.com>
* gdb.multi/base.exp: Remove stale "spaces" references.
Several of the gdb.multi tests use the "nowarnings" option to suppress
warnings. The warnings in question all come from missing headers,
like e.g.:
src/gdb/testsuite/gdb.multi/multi-arch-exec.c:28:3: warning: incompatible implicit declaration of built-in function 'exit' [enabled by default]
exit (1);
^
There's no point in trying to avoid to include standard headers. In
gdb.base/hangout.c's case, it's even dangerous, as that file calls
printf. In order to compile a call to a variatic function correctly,
a declaration must be visible.
gdb/testsuite/ChangeLog:
2015-12-10 Pedro Alves <palves@redhat.com>
* gdb.multi/base.exp: Don't use nowarnings.
* gdb.multi/bkpt-multi-exec.exp: Don't use nowarnings.
* gdb.multi/hangout.c: Include stdio.h.
* gdb.multi/hello.c: Include stdlib.h.
* gdb.multi/multi-arch-exec.c: Include stdlib.h.
* gdb.multi/multi-arch-exec.exp: Don't use nowarnings.
* gdb.multi/multi-arch.exp: Don't use nowarnings.
It is possible to use multiple base addresses within a single address
range series, within the .debug_ranges section. The following is a
simplified example for 32-bit addresses:
.section ".debug_ranges"
.4byte 0xffffffff
.4byte BASE_1
.4byte START_OFFSET_1
.4byte END_OFFSET_1
.4byte START_OFFSET_2
.4byte END_OFFSET_2
.4byte 0xffffffff
.4byte BASE_2
.4byte START_OFFSET_3
.4byte END_OFFSET_3
.4byte 0
.4byte 0
In this example START/END 1 and 2 are relative to BASE_1, while
START/END 3 are relative to BASE_2.
Currently gdb does not correctly parse this DWARF, resulting in
corrupted address range information. This commit fixes this issue, and
adds a new test to cover this case.
In order to support testing of this feature extensions were made to the
testsuite dwarf assembler, additional functionality was added to the
.debug_line generation function, and a new function for generating the
.debug_ranges section was added.
gdb/ChangeLog:
* dwarf2read.c (dwarf2_ranges_read): Unify and fix base address
reading code.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-ranges-base.c: New file.
* gdb.dwarf2/dw2-ranges-base.exp: New file.
* lib/dwarf.exp (namespace eval Dwarf): Add new variables to
support additional line table, and debug ranges generation.
(Dwarf::ranges): New function, generate .debug_ranges.
(Dwarf::lines): Support generating simple line table programs.
(Dwarf::assemble): Initialise new namespace variables.
This change eliminates some failures on simulator targets and makes
the test run a bit quicker too - without this change, we have to wait
for timeouts.
gdb/testsuite/ChangeLog:
* gdb.base/async.exp (proc test_background): Add case
for asynchronous execution not supported.
This set of patches add support for the zero-padded hexadecimal format for
varobj's, defined as "zero-hexadecimal". We currently only support regular
non-zero-padded hexadecimal.
Talking with IDE developers, they would like to have this option that is
already available to GDB's print/x commands, in the CLI, as 'z'.
gdb/ChangeLog:
2015-12-09 Luis Machado <lgustavo@codesourcery.com>
* gdb/mi/mi-cmd-var.c (mi_parse_format): Handle new "zero-hexadecimal"
format.
* gdb/varobj.c (varobj_format_string): Add "zero-hexadecimal" entry.
(format_code): Add 'z' entry.
(varobj_set_display_format): Handle FORMAT_ZHEXADECIMAL.
* gdb/varobj.h (varobj_display_formats) <FORMAT_ZHEXADECIMAL>: New enum
field.
* NEWS: Add new note to MI changes citing the new zero-hexadecimal
format for -var-set-format.
gdb/doc/ChangeLog:
2015-12-09 Luis Machado <lgustavo@codesourcery.com>
* gdb.texinfo (GDB/MI Variable Objects): Update text to mention
-var-set-format's new zero-hexadecimal format.
gdb/testsuite/ChangeLog:
2015-12-09 Luis Machado <lgustavo@codesourcery.com>
* gdb.mi/mi-var-display.exp: Add new checks for the zero-hexadecimal
format and change test names to make them unique.
When `info float` is used on an AMD64 system, GDB prints
floating-point values of x87 registers with raw contents like
0x361a867a8e0527397ce0 or 0xc4f988454a1ddd3cfdab wrongly.
This happens due to truncation to double, after which the former
becomes 0.0, and the latter becomes negative infinity. This is caused
by failed detection of x86-64 host, which results in setting
gdb_host_{float,double,long_double}_format to zeros.
This commit fixes this misdetection, and adds a test to make sure
future commits don't introduce a regression here.
gdb/ChangeLog:
2015-12-09 Ruslan Kabatsayev <b7.10110111@gmail.com>
PR gdb/18702
* configure.host: Fix detection of x86_64 host when setting
floatformats.
gdb/testsuite/ChangeLog:
2015-12-09 Ruslan Kabatsayev <b7.10110111@gmail.com>
Pedro Alves <pedro@redhat.com>
PR gdb/18702
Add checking of floatformats setup on x86_64 hosts.
* gdb.arch/i386-float.S (main): Load bigval and smallval.
(smallval, bigval): New labels/constants.
* gdb.arch/i386-float.exp: Use with_test_prefix and test "info
float" after loading bigval and smallval.
So far, trying to evaluate an expression involving a function call for
which GDB could find multiple function candidates outputs a menu so that
the user can select the one to run. For instance, with the two
following functions:
type New_Integer is new Integer;
function F (I : Integer) return Boolean;
function F (I : New_Integer) return Boolean;
Then we get the following GDB session:
(gdb) print f(1)
Multiple matches for f
[0] cancel
[1] foo.f at foo.adb:23
[2] foo.f at foo.adb.28
>
While the source location information is sufficient in order to
determine which one to select, one has to look for them in source files,
which is not convenient.
This commit tunes this menu in order to also include the list of formal
and return types (if any) in each entry. The above then becomes:
(gdb) print f(1)
Multiple matches for f
[0] cancel
[1] foo.f (integer) return boolean at foo.adb:23
[2] foo.f (foo.new_integer) return boolean at foo.adb.28
>
Since this output is more verbose than previously, this change also
introduces an option (set/show ada print-signatures) to get the original
output.
gdb/ChangeLog:
* ada-lang.c (print_signatures): New.
(ada_print_symbol_signature): New.
(user_select_syms): Add signatures to the output of candidate
symbols using ada_print_symbol_signature.
(_initialize_ada_language): Add a "set/show ada
print-signatures" boolean option.
gdb/testsuite/ChangeLog:
* gdb.ada/fun_overload_menu.exp: New testcase.
* gdb.ada/fun_overload_menu/foo.adb: New testcase.
Tested on x86_64-linux, no regression.
Rename target_ops.arch_setup to .post_create_inferior. In the Linux
hook, continue calling the low arch setup, then also set ptrace flags.
This corrects the possibility of running without flags, demonstrated by
a new test that would fail to catch a fork before.
gdb/gdbserver/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* target.h (struct target_ops) <arch_setup>: Rename to ...
(struct target_ops) <post_create_inferior>: ... this.
(target_arch_setup): Rename to ...
(target_post_create_inferior): ... this, calling post_create_inferior.
* server.c (start_inferior): Update target_arch_setup calls to
target_post_create_inferior.
* linux-low.c (linux_low_ptrace_options): Forward declare.
(linux_arch_setup): Update its comment for general use.
(linux_post_create_inferior): New, run arch_setup and setup ptrace.
(struct linux_target_ops): Use linux_post_create_inferior.
* lynx-low.c (struct lynx_target_ops): Update arch_setup stub comment
to post_create_inferior.
* nto-low.c (struct nto_target_ops): Likewise.
* spu-low.c (struct spu_target_ops): Likewise.
* win32-low.c (struct win32_target_ops): Likewise.
gdb/testsuite/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* gdb.base/catch-fork-static.exp: New.
In my remote cross testing (x86_64 host and aarch64 target), the test
gdb.base/sizeof.exp is skipped because gdb,noinferiorio is defined in
my gdbserver board file. Tests are skipped because the test checks
the expected value from the program's output, but I don't see why must
do it this way. With my patch applied, we can save the result in variable
in the program, and check the variable then. Then, the test doesn't rely
on inferiorio.
gdb/testsuite:
2015-12-03 Yao Qi <yao.qi@linaro.org>
* gdb.base/sizeof.c: Don't include stdio.h and
../lib/unbuffer_output.c.
(main): New variable 'size' and 'value'. Remove printf and
gdb_unbuffer_output. Assign return value to size and value.
* gdb.base/sizeof.exp: Remove the checking to gdb,noinferiorio
at the beginning.
(check_sizeof): Check the result by printing variable 'size'.
(check_valueof): Check the result by printing variable 'value'.
Testing with "maint set target-non-stop on" causes regressions in
tests that rely on TARGET_WAITKIND_NO_RESUMED, which isn't modelled on
the RSP. In real all-stop, gdbserver detects the situation and
reporst error to GDB, and so the tests (e.g.,
gdb.threads/no-unwaited-for-left.exp) at fail quickly. But with
"maint set target-non-stop on", GDB instead hangs forever waiting for
a stop reply that never comes, and so the tests take longer to time
out.
This adds a new "N" stop reply packet that maps 1-1 to
TARGET_WAITKIND_NO_RESUMED.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* NEWS (New remote packets): Mention the N stop reply.
* remote.c (remote_protocol_features): Add "no-resumed" entry.
(remote_query_supported): Report no-resumed+ support.
(remote_parse_stop_reply): Handle 'N'.
(process_stop_reply): Handle TARGET_WAITKIND_NO_RESUMED.
(remote_wait_as): Handle 'N' / TARGET_WAITKIND_NO_RESUMED.
(_initialize_remote): Register "set/show remote
no-resumed-stop-reply" commands.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* gdb.texinfo (Stop Reply Packets): Document the N stop reply.
(Remote Configuration): Add the "set/show remote
no-resumed-stop-reply" to the available settings table.
(General Query Packets): Document the "no-resumed" qSupported
feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* linux-low.c (linux_wait_1): If the last resumed thread is gone,
report TARGET_WAITKIND_NO_RESUMED.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_NO_RESUMED.
* server.c (report_no_resumed): New global.
(handle_query) <qSupported>: Handle "no-resumed+". Report
"no-resumed+" support.
(resume): When the target reports TARGET_WAITKIND_NO_RESUMED, only
return error if the client doesn't support no-resumed events.
(push_stop_notification): New function.
(handle_target_event): Use it. Report TARGET_WAITKIND_NO_RESUMED
events if the client supports them.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.threads/no-unwaited-for-left.exp: Remove setup_kfail calls.
The range-stepping tests fail with "maint set target-non-stop on" mode
because exec_cmd_expect_vCont_count doesn't know that in non-stop
mode, vCont's reply is simply "OK".
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* lib/range-stepping-support.exp (exec_cmd_expect_vCont_count):
Handle non-stop mode vCont replies.
Testing with the extended-remote board with "maint set target-non-stop
on" shows a dprintf-non-stop.exp regression. The issue is simply that
the test is expecting output that is only valid for the native target:
native:
[process 8676] #1 stopped.
remote:
[Thread 8900.8900] #1 stopped.
In order to expose this without "maint set target-non-stop on", this
restarts gdb with non-stop mode already enabled.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.base/dprintf-non-stop.exp: Use build_executable instead of
prepare_for_testing. Start gdb with "set non-stop on" appended to
GDBFLAGS. Lax expected stop output.
Testing with "maint set target-non-stop on" makes mi-nonstop.exp run
with the extended-remote board. That reveals that mi-nonstop.exp is
using the wrong predicate to check for "using remote protocol".
This is not visible today because non-stop tests all fail to run with
extended-remote board, because they spawn gdb and then do "set
non-stop on". However, with that board, gdb connects to the gdbserver
from within mi_gdb_start, and changing non-stop when already connected
doesn't work. Fix that by instead enabling non-stop mode on gdb's
command line.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-nonstop.exp: Append "set non-stop on" to GDBFLAGS
instead of issuing "-gdb-set non-stop 1" after starting gdb.
Use mi_is_target_remote instead of checking "is_remote target".
* lib/gdb.exp (gdb_is_target_remote): Rename to ...
(gdb_is_target_remote_prompt): ... this, and add 'prompt_regexp'
parameter.
(gdb_is_target_remote): Reimplement.
* lib/mi-support.exp (mi_is_target_remote): New procedure.
Both ARM and AArch64 have defined some SIMD data types in arm_neon.h,
but we don't have a test case for passing them and returning them in
inferior call. This test also covers passing and returning
homogeneous short vector aggregate (defined by AArch64 ABI document)
in inferior call too.
gdb/testsuite:
* gdb.arch/arm-neon.exp: New.
* gdb.arch/arm-neon.c: New.
Hi,
I see one fail on aarch64-linux testing,
FAIL: gdb.cp/annota2.exp: watch triggered on a.x (timeout)
because GDB prints two frames-invalid annotation but the test expects
only one.
next^M
^M
^Z^Zpost-prompt^M
^M
^Z^Zstarting^M
^M
^Z^Zframes-invalid^M
^M
^Z^Zframes-invalid^M
^M
Note I also see the fail on Debian-s390x-m64 too.
https://sourceware.org/ml/gdb-testers/2015-q4/msg07291.html
The test shouldn't only expect one frames-invalid annotation, because
there can be multiple times of stop/resume before the user visible
stop. Ulrich did something similar before
https://www.sourceware.org/ml/gdb-patches/2009-06/msg00118.html
This patch only changes ${frames_invalid} to \(${frames_invalid}\)*
in the regexp pattern.
The patch below fixes the fail on aarch64-linux.
gdb/testsuite:
2015-11-27 Yao Qi <yao.qi@linaro.org>
* gdb.cp/annota2.exp: Allow multiple occurrences of the
frames-invalid annotation.
Variable frames_invalid was defined, but wasn't used much. This patch
is to replace the literals in the regexp with ${frames_invalid}.
gdb/testsuite:
2015-11-27 Yao Qi <yao.qi@linaro.org>
* gdb.cp/annota2.exp: Use ${frames_invalid}.
I couldn't find a test that verified the thread name functionality, so I
created a new one.
A target board can define gdb,no_thread_names if it doesn't support thread
names and wants to skip the tests that uses them.
This test has been made with Linux in mind. Not all platforms use
pthread_setname_np to set the thread name, but some #ifdefs can be added
later in order to support other platforms.
Tested on x86-64 Ubuntu 14.04, native and remote.
gdb/testsuite/ChangeLog:
* gdb.threads/names.exp: New file.
* gdb.threads/names.c: New file.
* README: Mention gdb,no_thread_names.
If GDB has been configured without libipt support, i.e. HAVE_LIBIPT is
undefined, and is running on a system that supports Intel(R) Processor Trace,
GDB will run into an internal error when trying to decode the trace.
(gdb) record btrace
(gdb) s
usage (name=0x7fffffffe954 "fib-64")
at src/fib.c:12
12 fprintf(stderr, "usage: %s <num>\n", name);
(gdb) info record
Active record target: record-btrace
Recording format: Intel(R) Processor Trace.
Buffer size: 16kB.
gdb/btrace.c:971: internal-error: Unexpected branch trace format.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This requires a system with Linux kernel 4.1 or later running on a 5th
Generation Intel Core processor or later.
The issue is documented as PR 19297.
When trying to enable branch tracing, in addition to checking the target
support for the requested branch tracing format, also check whether GDB
supports. it.
gdb/
* btrace.c (btrace_enable): Check whether HAVE_LIBIPT is defined.
testsuite/
* lib/gdb.exp (skip_btrace_pt_tests): Check for a "GDB does not
support" error.
Before:
(gdb) info display
Auto-display expressions now in effect:
Num Enb Expression
3: y 1
2: y 1
1: y 1
After:
(gdb) info display
Auto-display expressions now in effect:
Num Enb Expression
1: y 1
2: y 1
3: y 1
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* printcmd.c (display_command): Append new display at the end of
the list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/display.exp: Expect displays to be sorted in ascending
order. Use multi_line.
* gdb.base/solib-display.exp: Likewise.
Before:
(gdb) info checkpoints
3 process 29132 at 0x4008ad, file foo.c, line 81
2 process 29131 at 0x4008ad, file foo.c, line 81
1 process 29130 at 0x4008ad, file foo.c, line 81
* 0 Thread 0x7ffff7fc5740 (LWP 29128) (main process) at 0x4008ad, file foo.c, line 81
After:
(gdb) info checkpoints
* 0 Thread 0x7ffff7fc5740 (LWP 29128) (main process) at 0x4008ad, file foo.c, line 81
1 process 29130 at 0x4008ad, file foo.c, line 81
2 process 29131 at 0x4008ad, file foo.c, line 81
3 process 29132 at 0x4008ad, file foo.c, line 81
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* printcmd.c (display_command): Append new display at the end of
the list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/display.exp: Expect displays to be sorted in ascending
order. Use multi_line.
* gdb.base/solib-display.exp: Likewise.
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
When trying to save fast tracepoints to file, gdb returns internal failure:
gdb/breakpoint.c:13446: internal-error: unhandled tracepoint type 27
A problem internal to GDB has been detected, further debugging may prove unreliable.
And no file including the fast tracepoints definition is created.
The patch also extends save-trace.exp to test saving tracepoint with a
fast tracepoint in there. Note that because this test doesn't actually
inserts the tracepoints in the program, we can run it with targets that
don't actually support fast tracepoints (or tracepoints at all).
gdb/ChangeLog:
* breakpoint.c (tracepoint_print_recreate): Fix logic error
if -> else if.
gdb/testsuite/ChangeLog:
* gdb.trace/actions.c: Include trace-common.h.
(main): Add a location for a fast tracepoint.
* gdb.trace/save-trace.exp: Set a fast tracepoint in addition to
the normal tracepoints.
(gdb_verify_tracepoints): Adjust number of expected tracepoints.
Some code is duplicated, to run the test twice with absolute and
relative paths, so I factored it out in a few procs. It uses
with_test_prefix to differentiate between test runs.
I replaced usages of "save-tracepoints" with "save tracepoint", since
the former is deprecated.
I also removed the "10.x", as it doesn't make much sense anymore. It
isn't used in general in the testsuite, and I don't think it's really
useful.
gdb/testsuite/ChangeLog:
* save-trace.exp: Factor out code to these...
(gdb_save_tracepoints): New.
(gdb_load_tracepoints): New.
(do_save_load_test): New.
The comment for the code in question says:
/* If the minimal symbol has a zero size, save it
but keep scanning backwards looking for one with
a non-zero size. A zero size may mean that the
symbol isn't an object or function (e.g. a
label), or it may just mean that the size was not
specified. */
As written, the code in question will only scan past the first symbol
of zero size. My change fixes the implementation to match the
comment.
Having this correct is important when the compiler generates several
local labels that are left in place by the linker. (I've been told
that the linker should eliminate these symbols, but I know of one
architecture for which this is not happening.)
I've created a test case called asmlabel.c. It's pretty simple:
main (int argc, char **argv)
{
asm ("L0:");
v = 0;
asm ("L1:");
v = 1; /* set L1 breakpoint here */
asm ("L2:");
v = 2; /* set L2 breakpoint here */
return 0;
}
If breakpoints are placed on the lines indicated by the comments,
this is the behavior of GDB built without my patch:
(gdb) continue
Continuing.
Breakpoint 2, L1 () at asmlabel.c:26
26 v = 1; /* set L1 breakpoint here */
Note that L1 appears as the function instead of main. This is not
what we want to happen. With my patch in place, we see the desired
behavior instead:
(gdb) continue
Continuing.
Breakpoint 2, main (argc=1, argv=0x7fffffffdb88) at asmlabel.c:26
26 v = 1; /* set L1 breakpoint here */
gdb/ChangeLog:
* minsyms.c (lookup_minimal_symbol_by_pc_section_1): Scan backwards
over all zero-sized symbols.
gdb/testsuite/ChangeLog:
* gdb.base/asmlabel.exp: New test.
* gdb.base/asmlabel.c: New test case.
One of our users reported an internal error using the "bt full"
command. In their situation, reproducing involved the following
scenario:
(gdb) frame 1
(gdb) bt full
#0 0xf7783430 in __kernel_vsyscall ()
No symbol table info available.
#1 0xf5550aeb in waitpid () at ../sysdeps/unix/syscall-template.S:81
No locals.
[...]
#6 0x0fe83139 in xxxx (arg=...)
[...some locals printed, and then...]
<S17b> =
[...]/dwarf2loc.c:364: internal-error: dwarf_expr_frame_base: Assertion
`framefunc != NULL' failed.
As shown above, the error happens while GDB is trying to print the value
of <S17b>, which is a local string internally generated by the compiler.
For that, it finds that the array lives in memory, and therefore tries
to create a struct value for it via:
case DWARF_VALUE_MEMORY:
{
CORE_ADDR address = dwarf_expr_fetch_address (ctx, 0);
[...]
retval = value_at_lazy (type, address + byte_offset);
Unfortunately for us, TYPE happens to be an array whose bounds
are dynamic. More precisely, the bounds of our arrays are described
in the debugging info as being...
<4><2c1985e>: Abbrev Number: 33 (DW_TAG_subrange_type)
<2c1985f> DW_AT_type : <0x2c1989c>
<2c19863> DW_AT_lower_bound : <0x2c19835>
<2c19867> DW_AT_upper_bound : <0x2c19841>
... which are references to a pair of local variables. For instance,
the lower bound is a reference to the following DIE
<3><2c19835>: Abbrev Number: 32 (DW_TAG_variable)
<2c19836> DW_AT_name : [...]
<2c1983a> DW_AT_type : <0x2c198b4>
<2c1983e> DW_AT_artificial : 1
<2c1983e> DW_AT_location : 2 byte block: 91 58 (DW_OP_fbreg: -40)
As a result of the above, value_at_lazy indirectly triggers
a resolution of TYPE (via value_from_contents_and_address),
which means a resolution of TYPE's bounds, and as seen in
the DW_AT_location attribute above for our bounds, computing
the bound's location requires the frame (its location expression
uses DW_OP_fbreg).
Unfortunately for us, value_at_lazy does not get passed a frame,
we've lost the relevant frame when we try to resolve the array's
bounds. Instead, resolve_dynamic_range gets calls dwarf2_evaluate_property
with NULL as the frame:
static struct type *
resolve_dynamic_range (struct type *dyn_range_type,
struct property_addr_info *addr_stack)
{
[...]
if (dwarf2_evaluate_property (prop, NULL, addr_stack, &value))
^^^^
... which then handles this by using the selected frame instead:
if (frame == NULL && has_stack_frames ())
frame = get_selected_frame (NULL);
In our case, the selected frame happens to be frame #1, which is
a frame where we have a minimal amount of debugging info, and in
particular, no debug info for the function itself. And because of that,
when we try to determine the frame's base...
static void
dwarf_expr_frame_base (void *baton, const gdb_byte **start,
size_t * length)
{
struct dwarf_expr_baton *debaton = (struct dwarf_expr_baton *) baton;
const struct block *bl = get_frame_block (debaton->frame, NULL);
[...]
framefunc = block_linkage_function (bl);
... framefunc ends up being NULL, which triggers the assert
in that same function:
gdb_assert (framefunc != NULL);
This patches avoids the issue by temporarily setting the selected_frame
before printing the locals of each frames.
This patch also adds a small testcase, which reproduces the same
issue, but with a slightly different outcome:
(gdb) bt full
#0 0x000000000040049a in opaque_routine ()
No symbol table info available.
#1 0x0000000000400532 in main () at wrong_frame_bt_full-main.c:20
my_table_size = 3
my_table = <error reading variable my_table (frame address is not available.)>
With this patch, the output becomes:
(gdb) bt full
[...]
my_table = {0, 1, 2}
gdb/ChangeLog:
* stack.c (print_frame_local_vars): Temporarily set the selected
frame to FRAME while printing the frame's local variables.
gdb/testsuite/ChangeLog:
* gdb.base/wrong_frame_bt_full-main.c: New file.
* gdb.base/wrong_frame_bt_full-opaque.c: New file.
* gdb.base/wrong_frame_bt_full.exp: New file.
Using the gdb.ada/var_rec_arr.exp test, where the program declares
an array of variant records...
type Record_Type (I : Small_Type := 0) is record
S : String (1 .. I);
end record;
type Array_Type is array (Integer range <>) of Record_Type;
... and then a variable A1 of type Array_Type, the following command
ocassionally trigger an internal error trying to allocate more memory
than we have left:
(gdb) ptype a1(1)
[...]/utils.c:1089: internal-error: virtual memory exhausted.
A problem internal to GDB has been detected,
[...]
What happens is that recent versions of GNAT are able to generate
DWARF expressions for type Record_Type, and therefore the record's
DW_AT_byte_size is not a constant, which unfortunately breaks
an assumption made by dwarf2read.c:read_structure_type when it does:
attr = dwarf2_attr (die, DW_AT_byte_size, cu);
if (attr)
{
TYPE_LENGTH (type) = DW_UNSND (attr);
}
As a result of this, when ada_evaluate_subexp tries to create
a value_zero for a1(1) while processing the OP_FUNCALL operator
as part of evaluating the subscripting operation in no-side-effect
mode, we try to allocate a value with a bogus size, potentially
triggering the out-of-memory internal error.
This patch avoids this issue by setting the length to zero in
this case. Until we decide to start supporting dynamic type
lengths in GDB's type struct, and it's not clear yet that
this is worth the effort (see added comment), that's probably
the best we can do.
gdb/ChangeLog:
* dwarf2read.c (read_structure_type): Set the type's length
to zero if it has a DW_AT_byte_size attribute which is not
a constant.
gdb/testsuite/ChangeLog:
* testsuite/gdb.ada/var_rec_arr.exp: Add "ptype a1(1)" test.
The Linux kernel disables the FPU upon returning to userland. This
introduces spurious failures in the register preservation tests in
callfuncs.exp, since the pstate.PEF bit gets cleared after system
calls.
This patch filters out the pstate register in sparc64-*-linux-gnu
targets, so the relevant tests are no longer fooled and pass.
gdb/testsuite/ChangeLog:
2015-11-20 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out the
pstate register when comparing registers values in
sparc64-*-linux-gnu targets to avoid spurious differences.
This patch adds a missing include that makes the test program to not
be built (--Wimplicit-function-declaration).
gdb/testsuite/ChangeLog:
2015-11-20 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.arch/sparc-sysstep.c: Include unistd.h for getpid.
This patch fixes all occurences of left-shifting negative constants in C cod
which is undefined by the C standard.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (_note): Fix left shift of negative value.
* gdb.trace/trace-condition.exp: Likewise.
This patch removes the leftover of the d10v stuff in the testsuite
directory. The d10v port was removed in GDB 6.7, but I happen to see
that there are still some leftovers about d10v in testsuite.
gdb/testsuite:
2015-11-13 Yao Qi <yao.qi@linaro.org>
* gdb.base/call-sc.exp (test_scalar_returns): Remove the
comments about d10v.
(test_scalar_returns): Likewise.
* gdb.base/d10v.ld: Remove.
* gdb.base/overlays.exp: Remove the target triplet checking for
d10v-*-*.
* gdb.base/structs.exp (test_struct_returns): Remove the
comments about d10v.
(test_struct_calls): Likewise.
gdb.base/gnu_vector.c printf the vector and gdb.base/gnu_vector.exp
expects the output by gdb_test_multiple. Nowadays, the test doesn't
expect the output from inferior_spawn_id, which is wrong. Even we
change the test to expect from inferior_spawn_id for the inferior
output, it is still possible the inferior exit before tcl/expect gets
the inferior output. We see this fail on both s390x-linux and
ppc-linux on buildbot,
FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
https://sourceware.org/ml/gdb-testers/2015-q4/msg04922.htmlhttps://sourceware.org/ml/gdb-testers/2015-q4/msg04952.html
In order to address these two shortcomings above in gnu_vector.exp,
this patch rewrites the test a little bit. Get rid of checking the
inferior output, and instead checking them by printing them. In this
way, the test can also be run on the target without inferior io
(gdb,noinferiorio is set in the board file).
gdb/testsuite:
2015-11-13 Yao Qi <yao.qi@linaro.org>
* gdb.base/gnu_vector.exp: Check the return value by "p res".
* gdb.base/gnu_vector.c: Don't include stdio.h.
(main): Don't print res and call add_some_intvecs.
The assembly code for emitting the proper tracepointable instruction
was duplicated in many places. Keep it in one place, to reduce work
needed for new targets.
gdb/testsuite/ChangeLog:
* gdb.trace/change-loc.h: include "trace-common.h", remove SYMBOL
macro.
(func5): Removed.
(func4): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/ftrace-lock.c: include "trace-common.h", remove SYMBOL
macro.
(func): Removed.
(thread_function): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/ftrace.c: include "trace-common.h", remove SYMBOL macro.
(func): Remove.
(marker): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/pendshr1.c: include "trace-common.h", remove SYMBOL macro.
(pendfunc1): Remove.
(pendfunc): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/pendshr2.c: include "trace-common.h", remove SYMBOL macro.
(foo): Remove.
(pendfunc2): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/trace-break.c: include "trace-common.h", remove SYMBOL
macro.
(func): Remove.
(marker): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/trace-common.h: New header.
* gdb.trace/trace-condition.c: include "trace-common.h", remove SYMBOL
macro.
(func): Remove.
(marker): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/trace-mt.c: include "trace-common.h", remove SYMBOL macro.
(func): Remove.
(thread_function): Use FAST_TRACEPOINT_LABEL.
These variables were used in many gdb.trace tests. Keep them in one place,
to reduce work needed for new targets.
gdb/testsuite/ChangeLog:
* gdb.trace/backtrace.exp: Use global fpreg/spreg definition, add $
in front.
* gdb.trace/change-loc.exp: Use global pcreg definition.
* gdb.trace/collection.exp: Use global pcreg/fpreg/spreg definition.
* gdb.trace/entry-values.exp: Use global spreg definition, add $
in front.
* gdb.trace/mi-trace-frame-collected.exp: Use global pcreg definition.
* gdb.trace/pending.exp: Likewise.
* gdb.trace/report.exp: Use global pcreg/fpreg/spreg definition.
* gdb.trace/trace-break.exp: Likewise.
* gdb.trace/trace-condition.exp: Use global pcreg definition, add $
in front.
* gdb.trace/unavailable.exp: Use global pcreg/fpreg/spreg definition.
* gdb.trace/while-dyn.exp: Use global fpreg definition, add $
in front.
* lib/trace-support.exp: Define fpreg, spreg, pcreg variables.
Consider a function with the following signature...
function F (R : out Rec_Type) return Enum_Type;
... where Rec_Type is a simple record:
type Rec_Type is record
Cur : Integer;
end record;
Trying to "finish" from that function causes GDB to SEGV:
(gdb) fin
Run till exit from #0 bar.f (r=...) at bar.adb:5
0x00000000004022fe in foo () at foo.adb:5
5 I : Enum_Type := F (R);
[1] 18949 segmentation fault (core dumped) /[..]/gdb
This is related to the fact that funtion F has a parameter (R)
which is an "out" parameter being passed by copy. For those,
GNAT transforms the return value to be a record with multiple
fields: The first one is called "RETVAL" and contains the return
value shown in the source, and the remaining fields have the same
name as the "out" or "in out" parameters which are passed by copy.
So, in the example above, function F returns a struct that has
one field who name is "r".
Because "RETVAL" starts with "R", GDB thinks it's a wrapper field,
because it looks like the encoding used for variant records:
-- member_name ::= {choice} | others_choice
-- choice ::= simple_choice | range_choice
-- simple_choice ::= S number
-- range_choice ::= R number T number <<<<<----- here
-- number ::= {decimal_digit} [m]
-- others_choice ::= O (upper case letter O)
See ada_is_wrapper_field:
return (name != NULL
&& (startswith (name, "PARENT")
|| strcmp (name, "REP") == 0
|| startswith (name, "_parent")
|| name[0] == 'S' || name[0] == 'R' || name[0] == 'O'));
As a result of this, when trying to print the RETURN value,
we think that RETVAL is a wrapper, and thus recurse into
print_field_values...
if (ada_is_wrapper_field (type, i))
{
comma_needed =
print_field_values (TYPE_FIELD_TYPE (type, i),
valaddr,
(offset
+ TYPE_FIELD_BITPOS (type, i) / HOST_CHAR_BIT),
stream, recurse, val, options,
comma_needed, type, offset, language);
... which is a problem since print_field_values assumes that
the type it is given ("TYPE_FIELD_TYPE (type, i)" here), is also
a record type. However, that's not the case, since RETVAL is
an enum. That eventually leads GDB to a NULL type when trying to
extract fields out of the enum, which then leads to a SEGV when
trying to dereference it.
Ideally, we'd want to be a little more careful in identifying
wrapper fields, by enhancing ada_is_wrapper_field to be a little
more complete in its analysis of the field name before declaring
it a variant record wrapper. However, it's not super easy to do
so, considering that the choices can be combined together when
complex choices are used. Eg:
-- [...] the choice 1 .. 4 | 7 | -10 would be represented by
-- R1T4S7S10m
Given that we are working towards getting rid of GNAT encodings,
which means that the above will eventually disappear, we took
the more pragmatic approach is just treating RETVAL as a special
case.
gdb/ChangeLog:
* ada-lang.c (ada_is_wrapper_field): Add special handling
for fields called "RETVAL".
gdb/testsuite/ChangeLog:
* gdb.ada/fin_fun_out: New testcase.
Some of the source code for the test cases in the GDB testsuite
reside in .S files containing assembly code. These files typically
define a symbol - such as main - which may, depending on the target,
require a prefix such as underscore.
For example, gdb.dwarf2/dw-compdir-oldgcc.S defines the symbol main:
main: .globl main
Some targets, such as rx-elf, require main to have an underscore
prefix. (If it doesn't, a linker error results due to not being able
to find _main required by crt0.o.) So, instead, the above should look
like this for rx-elf and other targets with this same requirement:
_main: .globl _main
This patch defines a new tcl proc in lib/gdb named
gdb_target_symbol_prefix_flags_asm. This proc returns a string
which will - assuming everything else is wired up correctly - cause
-DSYMBOL_PREFIX=_ to be passed on the command line to the compiler.
The test cases are augmented with a macro definition for SYMBOL
as follows:
#define CONCAT1(a, b) CONCAT2(a, b)
#define CONCAT2(a, b) a ## b
#ifdef SYMBOL_PREFIX
# define SYMBOL(str) CONCAT1(SYMBOL_PREFIX, str)
#else
# define SYMBOL(str) str
#endif
Symbols, such as main shown in the example earlier are then wrapped
with SYMBOL like this:
SYMBOL(main): .globl SYMBOL(main)
The net effect will be to add a prefix for those targets which need
it and add no prefix for those targets which do not.
It should be noted that there was already a proc in lib/gdb.exp
called gdb_target_symbol_prefix_flags. It still exists, but has
been significantly rewritten. (There is only one small difference
between the two versions.)
That proc used to explicitly list targets which were known to
require an underscore prefix. This is no longer done; the recently
added proc, gdb_target_symbol_prefix, is now invoked to dynamically
discover whether or not a prefix is required for that particular
target.
The difference between gdb_target_symbol_prefix_flags_asm
and gdb_target_symbol_prefix_flags is that the former returns
a bare prefix while the latter returns the prefix enclosed in
double quotes. I.e. assuming that the discovered prefix is
underscore, gdb_target_symbol_prefix_flags_asm returns:
additional_flags=-DSYMBOL_PREFIX=_
while gdb_target_symbol_prefix_flags returns:
additional_flags=-DSYMBOL_PREFIX="_"
The double-quoted version is not suitable for using with .S files
containing assembly code; there is no way to strip the double quotes
using C preprocessor constructs.
It would be possible to use the bare (non double quoted) version in
C source code. However, the supporting macros become more complicated
and therefore more difficult to maintain.
gdb/testsuite/ChangeLog:
* lib/gdb (gdb_target_symbol_prefix_flags_asm): New proc.
(gdb_target_symbol_prefix_flags): Define in terms of _asm
version.
* gdb.arch/i386-float.exp, gdb.arch/i386-permbkpt.exp,
gdb.dwarf2/dw2-canonicalize-type.exp,
gdb.dwarf2/dw2-compdir-oldgcc.exp, gdb.dwarf2/dw2-minsym-in-cu.exp,
gdb.dwarf2/dw2-op-stack-value.exp, gdb.dwarf2/dw2-unresolved.exp,
gdb.dwarf2/fission-reread.exp, gdb.dwarf2/pr13961.exp: Use flags
provided by gdb_target_symbol_prefix_flags_asm.
* gdb.dwarf2/dw2-canonicalize-type.S, gdb.dwarf2/dw2-compdir-oldgcc.S,
testsuite/gdb.dwarf2/dw2-minsym-in-cu.S,
testsuite/gdb.dwarf2/dw2-unresolved-main.c,
testsuite/gdb.dwarf2/dw2-unresolved.S, gdb.dwarf2/fission-reread.S,
gdb.dwarf2/pr13961.S: Define and use SYMBOL macro (and supporting
macros where needed). Use this macro for symbols which require
the prefix provided by SYMBOL_PREFIX.
Some of the tests in gdb.dwarf2 which use Dwarf::assemble refer to
(minimal/linker) symbols created in the course of building a small
test program. Some targets use a prefix such as underscore ("_") on
these symbols. Many of the tests in gdb.dwarf2 do not take this into
account. As a consequence, these tests fail to build, resulting
either in failures or untested testcases.
Here is an example from gdb.dwarf2/dw2-regno-invalid.exp:
Dwarf::assemble $asm_file {
cu {} {
compile_unit {
{low_pc main DW_FORM_addr}
{high_pc main+0x10000 DW_FORM_addr}
} {
...
}
For targets which require an underscore prefix on linker symbols,
the two occurrences of "main" would have to have a prepended underscore,
i.e. _main instead of main.
For the above case, a call to the new proc gdb_target_symbol is used
prepend the correct prefix to the symbol. I.e. the above code is
rewritten (as shown in the patch) as follows:
Dwarf::assemble $asm_file {
cu {} {
compile_unit {
{low_pc [gdb_target_symbol main] DW_FORM_addr}
{high_pc [gdb_target_symbol main]+0x10000 DW_FORM_addr}
} {
...
}
I also found it necessary to make an adjustment to lib/dwarf.exp so that
expressions of more than just one list element can be used in DW_TAG_...
constructs. Both atomic-type.exp and dw2-bad-mips-linkage-name.exp require
this new functionality.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_target_symbol_prefix, gdb_target_symbol):
New procs.
* lib/dwarf.exp (_handle_DW_TAG): Handle attribute values,
representing expressions, of more than one list element.
* gdb.dwarf2/atomic-type.exp (Dwarf::assemble): Use gdb_target_symbol
to prepend linker symbol prefix to f.
* gdb.dwarf2/data-loc.exp (Dwarf::assemble): Likewise, for
table_1 and table_2.
* gdb.dwarf2/dw2-bad-mips-linkage-name.exp (Dwarf::assemble):
Likewise, for f and g.
* gdb.dwarf2/dw2-ifort-parameter.exp (Dwarf::assemble): Likewise,
for ptr.
* gdb.dwarf2/dw2-regno-invalid.exp (Dwarf::assemble): Likewise,
for main.
* gdb.dwarf2/dynarr-ptr.exp (Dwarf::assemble): Likewise, for
table_1_ptr and table_2_ptr.
allocate (vla1 (5)) ! vla1-not-allocated
l = allocated(vla1) ! vla1-allocated <------------------
Expecting: ^(510-data-evaluate-expression vla1[^M
]+)?(510\^done,value="\(0, 0, 0, 0, 0\)"[^M
]+[(]gdb[)] ^M
[ ]*)
510-data-evaluate-expression vla1^M
510^done,value="(1.82987403e-09, 7.8472714e-44, 1.82987403e-09, 7.8472714e-44, 2.67929926e+20)"^M
(gdb) ^M
FAIL: gdb.mi/mi-vla-fortran.exp: evaluate allocated vla
gcc-4.9.2-6.fc21.x86_64
I think some older gfortran did initialize allocated memory but that is an
unspecified behavior. I haven't found any initialization mentioned
in Fortran 90 standard (draft) and it is also clearly stated here:
https://software.intel.com/en-us/forums/intel-fortran-compiler-for-linux-and-mac-os-x/topic/268786
Initialization to 0 of allocated arrays (of integers) is an
implementation issue. i.e. do not rely on it.
Joel Brobecker wrote:
I am wondering if it might be better to just relax instead the regexp to allow
any number rather than just remove the test altogether. The test allows us to
verify that, as soon as we're past the "allocate" call, we no longer say "not
allocated".
gdb/testsuite/ChangeLog
2015-11-03 Jan Kratochvil <jan.kratochvil@redhat.com>
Joel Brobecker <brobecker@adacore.com>
* gdb.mi/mi-vla-fortran.exp (evaluate allocated vla): Permit any data.
gdb/ChangeLog:
PR/18376
* gdb/configure.tgt: Add linux-record.o to s390*-linux.
* gdb/s390-linux-tdep.c: #include "linux-record.h", "record-full.h"
(s390_linux_record_tdep): New static global variable.
(s390x_linux_record_tdep): New static global variable.
(s390_all_but_pc_registers_record): New function.
(s390_canonicalize_syscall): New function.
(s390_linux_syscall_record): New function.
(s390_linux_record_signal): New function.
(s390_record_calc_disp_common): New function.
(s390_record_calc_disp): New function.
(s390_record_calc_disp_vsce): New function.
(s390_record_calc_rl): New function.
(s390_record_gpr_g): New function.
(s390_record_gpr_h): New function.
(s390_record_vr): New function.
(s390_process_record): New function.
(s390_init_linux_record_tdep): New function.
(s390_gdbarch_init): Fill record function slots.
gdb/testsuite/ChangeLog:
* gdb.reverse/s390-mvcle.c: New test.
* gdb.reverse/s390-mvcle.exp: New file.
* lib/gdb.exp: Enable reverse tests on s390*-linux.
The breakpoint presented in the return statement was not activated while
compiling the test with gcc 4.9.2. Added a dummy statement to allow the
breakpoint again.
2015-10-14 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/testsuite:
* i386-mpx-map.c (foo): Add dummy statement to trigger breakpoint.
Change-Id: I5293ca1c7f82a631e1e41cb650c30dd2d09ef3c2
Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
Adapts tests to use actual GCC flags, previous used flags were
related to an internal GCC release.
2015-06-18 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/testsuite:
* gdb.arch/i386-mpx-map.exp (comp_flags): Use released GCC flags.
* gdb.arch/i386-mpx.exp (comp_flags): Use released GCC flags.
Change-Id: Id4c4551693a8df071ed4b71bb5dfb46a526ed5db
Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
continue_to_breakpoint always continues to the next breakpoint, not to the
one named in parameter. This rendered the tests effectively useless, since
marker2 was never reached.
gdb/testsuite/ChangeLog:
* gdb.reverse/fstatat-reverse.exp: Set breakpoint on marker1 after
reaching marker2.
* gdb.reverse/getresuid-reverse.exp: Likewise.
* gdb.reverse/pipe-reverse.exp: Likewise.
* gdb.reverse/readv-reverse.exp: Likewise.
* gdb.reverse/recvmsg-reverse.exp: Likewise.
* gdb.reverse/time-reverse.exp: Likewise.
* gdb.reverse/waitpid-reverse.exp: Likewise and add KFAILs.
Nowadays, test gdb.threads/wp-replication.exp uses a while loop to
repeatedly insert HW watchpoint, resume and check no error message
coming out, in order to count HW watchpoints There are some
drawbacks in this way,
- the loop could be endless. I think this is use to making trouble
to S/390, since we had such comment
# Some targets (like S/390) behave as though supporting
# unlimited hardware watchpoints. In this case we just take a
# safe exit out of the loop.
I hit this today too because a GDB internal error is triggered
on "continue" in the loop, and $done is 0 invariantly, so the loop
can't end.
- the code counting hardware watchpoint is too complicated. We can
use "set breakpoint always-inserted on" to get the result of inserting
HW watchpoint without resuming the inferior. In this way,
watch_count_done and empty_cycle in c file is no longer needed.
In this patch, I change to use "set breakpoint always-inserted on" trick,
and only iterate $NR_THREADS times, to count the HW watchpoint. In this
way, the loop can't be endless, and GDB doesn't need to resume the inferior.
gdb/testsuite:
2015-10-30 Yao Qi <yao.qi@linaro.org>
* gdb.threads/wp-replication.c (watch_count_done): Remove.
(empty_cycle): Remove.
(main): Don't call empty_cycle. Don't use watch_count_done.
* gdb.threads/wp-replication.exp: Don't set breakpoint on
empty_cycle. Rewrite the code counting HW watchpoints.
gdb/testsuite/ChangeLog:
* gdb.reverse/fstatat-reverse.c: New test.
* gdb.reverse/fstatat-reverse.exp: New file.
* gdb.reverse/getresuid-reverse.c: New test.
* gdb.reverse/getresuid-reverse.exp: New file.
* gdb.reverse/pipe-reverse.c: New test.
* gdb.reverse/pipe-reverse.exp: New file.
* gdb.reverse/readv-reverse.c: New test.
* gdb.reverse/readv-reverse.exp: New file.
* gdb.reverse/recvmsg-reverse.c: New test.
* gdb.reverse/recvmsg-reverse.exp: New file.
* gdb.reverse/time-reverse.c: New test.
* gdb.reverse/time-reverse.exp: New file.
* gdb.reverse/waitpid-reverse.c: New test.
* gdb.reverse/waitpid-reverse.exp: New file.
Running ./gdb.ada/access_to_packed_array.exp ...
ERROR: tcl error sourcing ./gdb.ada/access_to_packed_array.exp.
ERROR: extra characters after close-quote
while executing
"gdb_test "print pack.a" "\\(0 => 1, 2, 3, 4, 5, 6, 7, 8, 9, 10\\)")"
(file "./gdb.ada/access_to_packed_array.exp" line 29)
invoked from within
"source ./gdb.ada/access_to_packed_array.exp"
("uplevel" body line 1)
invoked from within
"uplevel #0 source ./gdb.ada/access_to_packed_array.exp"
invoked from within
"catch "uplevel #0 source $test_file_name""
Unrelated to the typos I have changed the print expectations s/"x"/" = x"/
as for example expectation "3" should not match " = 43".
2015-10-27 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.ada/access_to_packed_array.exp: Fix typos erroring the testfile.
gdb/ChangeLog:
PR python/18938
* cli/cli-cmds (source_script_fron_sctream): New arg file_to_open.
All callers updated.
gdb/testsuite/ChangeLog:
* gdb.python/python.exp: Add test for symlink from .py file to .notpy
file.
Since 7.4, gdb doesn't allow calling .fields() on a function type, even
though the documentation states it should return a list corresponding to
the function's parameters. This patch restores the intended behaviour
and adds a test for it.
Reg-tested on Arch Linux x86-64.
gdb/ChangeLog:
PR python/18073
* python/py-type.c (typy_get_composite): Allow returning a
function type.
gdb/testsuite/ChangeLog:
PR python/18073
* gdb.python/py-type.c (C::a_method): New.
(C::a_const_method): New.
(C::a_static_method): New.
(a_function): New.
* gdb.python/py-type.exp (test_fields): Test getting fields
from function and method.
Fortran provide types whose values may be dynamically allocated
or associated with a variable under explicit program control.
The purpose of this commit is:
* to read allocated/associated DWARF tags and store them in
the dynamic property list of main_type.
* enable GDB to print the value of a dynamic array in Fortran
in case the type is allocated or associated (pointer to
dynamic array).
Examples:
(gdb) p vla_not_allocated
$1 = <not allocated>
(gdb) p vla_allocated
$1 = (1, 2, 3)
(gdb) p vla_ptr_not_associated
$1 = <not associated>
(gdb) p vla_ptr_associated
$1 = (1, 2, 3)
Add basic test coverage for most dynamic array use-cases in Fortran.
The commit contains the following tests:
* Ensure that values of Fortran dynamic arrays
can be evaluated correctly in various ways and states.
* Ensure that Fortran primitives can be evaluated
correctly when used as a dynamic array.
* Dynamic arrays passed to subroutines and handled
in different ways inside the routine.
* Ensure that the ptype of dynamic arrays in
Fortran can be printed in GDB correctly.
* Ensure that dynamic arrays in different states
(allocated/associated) can be evaluated.
* Dynamic arrays passed to functions and returned from
functions.
* History values of dynamic arrays can be accessed and
printed again with the correct values.
* Dynamic array evaluations using MI protocol.
* Sizeof output of dynamic arrays in various states.
The patch was tested using the test suite on Ubuntu 12.04 64bit.
gdb/ChangeLog:
* dwarf2read.c (set_die_type): Add read of
DW_AT_allocated and DW_AT_associated.
* f-typeprint.c: New include of typeprint.h
(f_print_type): Add check for allocated/associated
status of type.
(f_type_print_varspec_suffix): Add check for
allocated/associated status of type.
* gdbtypes.c (create_array_type_with_stride):
Add check for valid data location of type in
case allocated or associated attributes are set.
Length of an array should be only calculated if
allocated or associated is resolved as true.
(is_dynamic_type_internal): Add check for allocated/
associated.
(resolve_dynamic_array): Evaluate allocated/associated
properties.
* gdbtypes.h (enum dynamic_prop_node_kind): <DYN_PROP_ALLOCATED>
<DYN_PROP_ASSOCIATED>: New enums.
(TYPE_ALLOCATED_PROP, TYPE_ASSOCIATED_PROP): New macros.
(type_not_allocated): New function.
(type_not_associated): New function.
* valarith.c (value_subscripted_rvalue): Add check for
allocated/associated.
* valprint.c: New include of typeprint.h.
(valprint_check_validity): Add check for allocated/associated.
(value_check_printable): Add check for allocated/
associated.
* typeprint.h (val_print_not_allocated): New function.
(val_print_not_associated): New function.
* typeprint.c (val_print_not_allocated): New function.
(val_print_not_associated): New function.
gdb/testsuite/ChangeLog:
* gdb.fortran/vla-alloc-assoc.exp: New file.
* gdb.fortran/vla-datatypes.exp: New file.
* gdb.fortran/vla-datatypes.f90: New file.
* gdb.fortran/vla-history.exp: New file.
* gdb.fortran/vla-ptype-sub.exp: New file.
* gdb.fortran/vla-ptype.exp: New file.
* gdb.fortran/vla-sizeof.exp: New file.
* gdb.fortran/vla-sub.f90: New file.
* gdb.fortran/vla-value-sub-arbitrary.exp: New file.
* gdb.fortran/vla-value-sub-finish.exp: New file.
* gdb.fortran/vla-value-sub.exp: New file.
* gdb.fortran/vla-value.exp: New file.
* gdb.fortran/vla-ptr-info.exp: New file.
* gdb.mi/mi-vla-fortran.exp: New file.
* gdb.mi/vla.f90: New file.
Nowadays, in the range-stepping tests, we check not only the number of
vCont;r packets but also the number of vCont;s packets, because we think
the remote target which can do range stepping must support single step.
However, if we turn displaced stepping on, the remote target (GDBserver)
can do range stepping, and support single step, but GDB may decide to
resume instructions in the scratchpad rather than single step them one
by one for displaced stepping. For example, when aarch64 GDB debugs
arm linux program with aarch64 GDBserver, GDBserver supports both range
stepping and single step, but GDB (with the gdbarch for arm-linux)
decides resume instructions in the scratchpad, so in the RSP traffic,
there is no vCont;s packet at all, and some range-stepping.exp tests
fail,
FAIL: gdb.base/range-stepping.exp: multi insns: next: vCont;s=1 vCont;r=1
This patch is to get rid of the checking to the number of vCont;s in
exec_cmd_expect_vCont_count.
gdb/testsuite:
2015-10-21 Yao Qi <yao.qi@linaro.org>
* lib/range-stepping-support.exp (exec_cmd_expect_vCont_count):
Remove argument exp_vCont_s.
* gdb.base/range-stepping.exp: Callers updated.
* gdb.trace/range-stepping.exp: Likewise.
The existing logic was simply to flip syscall entry/return state when a
syscall trap was seen, and even then only with active 'catch syscall'.
That can get out of sync if 'catch syscall' is toggled at odd times.
This patch updates the entry/return state for all syscall traps,
regardless of catching state, and also updates known syscall state for
other kinds of traps. Almost all PTRACE_EVENT stops are delivered from
the middle of a syscall, so this can act like an entry. Every other
kind of ptrace stop is only delivered outside of syscall event pairs, so
marking them ignored ensures the next syscall trap looks like an entry.
Three new test scenarios are added to catch-syscall.exp:
- Disable 'catch syscall' from an entry to deliberately miss the return
event, then re-enable to make sure a new entry is recognized.
- Enable 'catch syscall' for the first time from a vfork event, which is
a PTRACE_EVENT_VFORK in the middle of the syscall. Make sure the next
syscall event is recognized as the return.
- Make sure entry and return are recognized for an ENOSYS syscall. This
is to defeat a common x86 hack that uses the pre-filled ENOSYS return
value as a sign of being on the entry side.
gdb/ChangeLog:
2015-10-19 Josh Stone <jistone@redhat.com>
* linux-nat.c (linux_handle_syscall_trap): Always update entry/
return state, even when not actively catching syscalls at all.
(linux_handle_extended_wait): Mark syscall_state like an entry.
(wait_lwp): Set syscall_state ignored for other traps.
(linux_nat_filter_event): Likewise.
gdb/testsuite/ChangeLog:
2015-10-19 Josh Stone <jistone@redhat.com>
* gdb.base/catch-syscall.c: Include <sched.h>.
(unknown_syscall): New variable.
(main): Trigger a vfork and an unknown syscall.
* gdb.base/catch-syscall.exp (vfork_syscalls): New variable.
(unknown_syscall_number): Likewise.
(check_call_to_syscall): Accept an optional syscall pattern.
(check_return_from_syscall): Likewise.
(check_continue): Likewise.
(test_catch_syscall_without_args): Check for vfork and ENOSYS.
(test_catch_syscall_skipping_return): New test toggling off 'catch
syscall' to step over the syscall return, then toggling back on.
(test_catch_syscall_mid_vfork): New test turning on 'catch syscall'
during a PTRACE_EVENT_VFORK stop, in the middle of a vfork syscall.
(do_syscall_tests): Call test_catch_syscall_without_args and
test_catch_syscall_mid_vfork.
(test_catch_syscall_without_args_noxml): Check for vfork and ENOSYS.
(fill_all_syscalls_numbers): Initialize unknown_syscall_number.
The func command, available when starting gdb in dbx mode, is supposed
to take a function name and locate the frame for that function in the
stack. This has been broken for a while due to an invalid check of the
arguments within the worker function. Fixed in this commit.
gdb/ChangeLog:
* stack.c (func_command): Return early when there is no ARG
string.
gdb/testsuite/ChangeLog:
* gdb.base/dbx.exp (test_func): Remove xfails, update expected
results.
This patch adds a new test case which uses gdb.arch/insn-reloc.c too
to test displaced stepping. Nowadays, tests are for x86, x86_64 and
aarch64.
gdb/testsuite:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* gdb.arch/disp-step-insn-reloc.exp: New test case.
This patch adds more tests in gdb.arch/insn-reloc.c to cover
instruction BL and cover B.CON when CON is false. These new added
tests can be used for displaced stepping too.
gdb/testsuite:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* gdb.arch/insn-reloc.c (can_relocate_bcond): Rename to ...
(can_relocate_bcond_true): ... it.
(can_relocate_bcond_false): New function.
(foo): Likewise.
(can_relocate_bl): Likewise.
(testcases) [__aarch64__]: Add can_relocate_bcond_false and
can_relocate_bl.
Assume foo_array is a pointer to a C structure. GDB must evaluate the
following expression properly, but it does not currently:
(gdb) print 1 && &foo_array[1].a
Attempt to take address of value not located in memory.
The problem is that in EVAL_AVOID_SIDE_EFFECTS mode,
eval.c:evaluate_subexp_standard always returns a not_lval value as the
result for a STRUCTOP_STRUCT operation. As a consequence, the rest of
the code believes that one cannot take the address of the returned
value.
This patch fixes STRUCTOP_STRUCT handling so that the VALUE_LVAL
attribute for the returned value is properly initialized. After this
change, the above session becomes:
(gdb) print 1 && &foo_array[1].a
$1 = 1
gdb/ChangeLog:
* eval.c (evaluate_subexp_standard) <STRUCTOP_STRUCT>: If
EVAL_AVOID_SIDE_EFFECTS mode, forward the VALUE_LVAL attribute
to the returned value.
gdb/testsuite/ChangeLog:
* gdb.base/nested-addr.c: New file.
* gdb.base/nested-addr.exp: New testcase.
Tested on x86_64-linux, no regression.
The vdso.exp test checks that we can access the VDSO memory when replaying.
Depending on the line information generated by the compiler, runto_main may run
to the line marked with bp.1 or stop before that line. The test incorrectly
assumes that it will always run to the marked line and fails if it doesn't.
The test does not really care about what is traced. It does care that GDB is
replaying when capturing the second disassemble output.
Reflect that in the test by ignoring the output of the stepping and record goto
begin commands and by checking that GDB is actually replaying.
testsuite/
* gdb.btrace/vdso.c (main): Remove breakpoint markers.
* gdb.btrace/vdso.exp: Change stepping command to "next" and ignore
its output. Ignore the output of "record goto begin" and instead
check that GDB is replaying.
This patch fixes this racy failure, with the native-extended-gdbserver
board:
(gdb) run
Starting program: build/gdb/testsuite/outputs/gdb.base/a2-run/a2-run
Remote debugging from host 127.0.0.1
Process build/gdb/testsuite/outputs/gdb.base/a2-run/a2-run created; pid = 23832
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
Reading /lib64/libm.so.6 from remote target...
Reading /lib64/libc.so.6 from remote target...
[Inferior 1 (process 23832) exited with code 01]
(gdb) FAIL: gdb.base/a2-run.exp: run "a2-run" with no args
PASS: gdb.base/a2-run.exp: no spurious messages at program exit
run 5
Starting program: build/gdb/testsuite/outputs/gdb.base/a2-run/a2-run 5
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
usage: factorial <number>
Child exited with status 1
Note that the output is correct; it's just that inferior output
appeared after gdb's output, and the test doesn't handle that
correctly.
This comment isn't really correct, unfortunately:
# waiting. If we had already seen the status wrapper exit,
# gdb_test_multiple/expect has no spawn ids left, and thus
# returns.
That's true of expect in general, but I had missed / forgot that
gdb_test_multiple internally has extra matches using "-i
$gdb_spawn_id", so even if the caller clears all the indirect spawn id
lists, gdb_test_multiple will continue waiting.
So do a conditional exp_continue manually instead.
gdb/testsuite/ChangeLog:
2015-10-09 Pedro Alves <palves@redhat.com>
* gdb.base/a2-run.exp (maybe_exp_continue): New procedure.
(top level): Use it in the run with no args test.
gdb/ChangeLog:
* d-exp.y: (UnaryExpression): Support `type.sizeof' expressions.
(PostfixExpression): Support `expr.sizeof' expressions.
(PrimaryExpression): Support `typeof(expr)' expressions.
gdb/testsuite/ChangeLog:
* gdb.dlang/properties.exp: New file.
2015-10-02 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.dwarf2/staticvirtual.exp: Generalize regexp so it can match
whether or not address 0x1000 is mapped on the target.
I noticed this while working on the test case. I believe it would make
sense to skip running the tests if the binary failed to build. Although
I would understand the opposite argument: if the binary does not build
for some reason, we probably want to know about it, and some catastrophic
failures in the tests might alarm us better than a timid "UNTESTED".
gdb/testsuite/ChangeLog:
* gdb.python/py-type.exp: Do not run tests if binaries fail to
build.
If the atomic section in x86-tsx.S is aborted, the tsx.exp test will fail
even if the traced output is actually correct.
Consider abort scenarios in the test.
testsuite/
* gdb.btrace/tsx.exp: Consider multiple correct outputs in the record
instruction-history test.
2015-09-24 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.cp/classes.exp (test_enums): Generalize regexp to allow
short or char as base type.
Compilers can materialize renamings of arrays (or of accesses to arrays)
in Ada into variables whose types are references to the actual array
types. Before this change, trying to use such an array renaming yielded
an error in GDB:
(gdb) print my_array(1)
cannot subscript or call a record
(gdb) print my_array_ptr(1)
cannot subscript or call something of type `(null)'
This behavior comes from bad handling for array renamings, in particular
the OP_FUNCALL expression operator handling from ada-lang.c
(ada_evaluate_subexp): in one place we turn the reference into a
pointer, but the code that follows expect the value to be an array.
This patch fixes how we handle references in call/subscript evaluation
so that we turn these references into the actual array values instead of
pointers to them.
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <OP_FUNCALL>: When the input
value is a reference, actually dereference it in order to get
the underlying value.
gdb/testsuite/ChangeLog:
* gdb.ada/array_ptr_renaming.exp: New testcase.
* gdb.ada/array_ptr_renaming/foo.adb: New file.
* gdb.ada/array_ptr_renaming/pack.ads: New file.
Tested on x86_64-linux, no regression.
When installing a fast tracepoint, we create a jump pad with a
spin-lock. This way, only one thread can collect a given tracepoint at
any time. This test case checks that this lock actually works as
expected.
This test works by creating a function which overrides the in-process
agent library's gdb_collect function. On start up, GDBserver will ask
GDB with the 'qSymbol' packet about symbols present in the inferior.
GDB will reply with the gdb_agent_gdb_collect function from the test
case instead of the one from the agent.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace-lock.c: New file.
* gdb.trace/ftrace-lock.exp: New file.
This test case makes sure that relocating PC relative instructions does
not change their behaviors. All PC relative AArch64 instructions are
covered. While call and jump (32 bit relative) instructions are covered
on x86.
The test case creates a static array of function pointers for each
supported architecture. Each function in this array tests a specific
instruction using inline assembly. They all need to contain a symbol in
the form of 'set_point\[0-9\]+' and finish by either calling pass or
fail. The number of 'set_pointN' needs to go from 0 to
(ARRAY_SIZE - 1).
The test will:
- look up the number of function pointers in the static array.
- set fast tracepoints on each 'set_point\[0-9\]+' symbol, one in each
functions from 0 to (ARRAY_SIZE - 1).
- run the trace experiment and make sure the pass function is called for
every function.
gdb/testsuite/ChangeLog:
* gdb.arch/insn-reloc.c: New file.
* gdb.arch/ftrace-insn-reloc.exp: New file.
bfd/ChangeLog:
* targets.c (enum bfd_flavour): Add comment.
(bfd_flavour_name): New function.
* bfd-in2.h: Regenerate.
gdb/ChangeLog:
* findvar.c (default_read_var_value) <LOC_UNRESOLVED>: Include the
kind of minimal symbol in the error message.
* objfiles.c (objfile_flavour_name): New function.
* objfiles.h (objfile_flavour_name): Declare.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-bad-unresolved.c: New file.
* gdb.dwarf2/dw2-bad-unresolved.exp: New file.
2015-09-18 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.mi/mi-pending.exp: Don't use directory prefix when setting
the pending breakpoint. Remove timeout override for "Run till
MI pending breakpoint on pendfunc3 on thread 2" test.
In all-stop mode, record btrace maintains the old behaviour of an implicit
scheduler-locking on.
Now that we added a scheduler-locking mode to model this old behaviour, we
don't need the respective code in record btrace anymore. Remove it.
For all-stop targets, step inferior_ptid and continue other threads matching
the argument ptid. Assert that inferior_ptid matches the argument ptid.
This should make record btrace honour scheduler-locking.
gdb/
* record-btrace.c (record_btrace_resume): Honour scheduler-locking.
testsuite/
* gdb.btrace/multi-thread-step.exp: Test scheduler-locking on, step,
and replay.
This patch adds a test case for tracepoints with a condition expression.
Each case will test a condition against the number of frames that should
have been traced. Some of these tests fail on x86_64 and others on
i386, which have been marked as known failures for now, see PR/18955.
gdb/testsuite/ChangeLog:
2015-09-17 Pierre Langlois <pierre.langlois@arm.com>
Yao Qi <yao.qi@linaro.org>
* gdb.trace/trace-condition.c: New file.
* gdb.trace/trace-condition.exp: New file.
This patch fixes the argument passed to compiled_cond. It should be
regs buffer instead of tracepoint_hit_ctx. Test case is added as
well for testing compiled-cond.
gdb/gdbserver/ChangeLog
2015-09-16 Wei-cheng Wang <cole945@gmail.com>
* tracepoint.c (eval_result_type): Change prototype.
(condition_true_at_tracepoint): Fix argument to compiled_cond.
gdb/testsuite/ChangeLog
2015-09-16 Wei-cheng Wang <cole945@gmail.com>
* gdb.trace/ftrace.exp: (test_ftrace_condition) New function
for testing bytecode compilation.
On software single-step targets that don't support displaced stepping,
threads keep hitting each other's single-step breakpoints, and then
GDB needs to pause all threads to step past those. The end result is
that progress in the main thread will be slower and it may take a bit
longer for the signal to be queued. This patch bumps the timeout on
such targets.
gdb/testsuite/ChangeLog:
2015-09-16 Pedro Alves <palves@redhat.com>
Sandra Loosemore <sandra@codesourcery.com>
* gdb.threads/non-stop-fair-events.c (timeout): New global.
(SECONDS): Redefine.
(main): Call pthread_kill and alarm early.
* gdb.threads/non-stop-fair-events.exp: Probe displaced stepping
support.
(test): If the target can't hardware step and doesn't support
displaced stepping, increase the timeout.
If we enable infrun debug running this test, it quickly fails with a
full expect buffer. That can be simply handled with a couple
exp_continues. As it's annoying to hack this every time we need to
debug the test, this patch adds bits to enable debugging support
easily, with a one-line change.
And then, if any iteration of the test fails, we end up with a long
cascade of time outs. Just bail out when we see the first fail.
gdb/testsuite/
2015-09-16 Pedro Alves <palves@redhat.com>
* gdb.threads/non-stop-fair-events.exp (gdb_test_no_anchor)
(enable_debug): New procedures.
(test): Use them. Bail out if waiting for threads fails.
(top level): Bail out if a test fails.
This patch adds gdb.asm/aarch64.inc, so asm-source.exp isn't skipped
on aarch64 any more.
gdb/testsuite:
2015-09-16 Yao Qi <yao.qi@linaro.org>
* gdb.asm/asm-source.exp: Set asm-arch for
aarch64*-*-* target.
* gdb.asm/aarch64.inc: New file.
This change is relevant only for standard DWARF (as opposed to the GNAT
encodings extensions): at the time of writing it only makes a difference
with GCC patches that are to be integrated: see the patch series
submission at
<https://gcc.gnu.org/ml/gcc-patches/2015-07/msg01353.html>.
Given the following Ada declarations:
subtype Small_Int is Natural range 0 .. 100;
type R_Type (L : Small_Int := 0) is record
S : String (1 .. L);
end record;
type A_Type is array (Natural range <>) of R_Type;
A : A_Type := (1 => (L => 0, S => ""),
2 => (L => 2, S => "ab"));
Before this change, we would get the following GDB session:
(gdb) ptype a
type = array (1 .. 2) of foo.r_type <packed: 838-bit elements>
This is wrong: "a" is not a packed array. This output comes from the
fact that, because R_Type has a dynamic size (with a maximum), the
compiler has to describe in the debugging information the size allocated
for each array element (i.e. the stride, in DWARF parlance: see
DW_AT_byte_stride). Ada type printing currently assumes that arrays
with a stride are packed, hence the above output.
In practice, GNAT never performs bit-packing for arrays that contain
variable-sized elements. Leveraging this fact, this patch enhances type
printing so that ptype does not pretend that arrays are packed when they
have a stride and they contain dynamic elements. After this change, we
get the following expected output:
(gdb) ptype a
type = array (1 .. 2) of foo.r_type
gdb/ChangeLog:
* ada-typeprint.c (print_array_type): Do not describe arrays as
packed when they embed dynamic elements.
gdb/testsuite/ChangeLog:
* gdb.ada/array_of_variable_length.exp: New testcase.
* gdb.ada/array_of_variable_length/foo.adb: New file.
* gdb.ada/array_of_variable_length/pck.adb: New file.
* gdb.ada/array_of_variable_length/pck.ads: New file.
Tested on x86_64-linux, no regression.
clang names the local variable t_structs_a.buf.
gdb/testsuite/ChangeLog:
* gdb.base/callfuncs.exp (do_function_calls): Handle clang naming
of function static local variable.
ppc64le loses control when stepping between two PLT-called functions inside
a shared library:
29 shlib_second (); /* first-hit */^M
(gdb) PASS: gdb.base/solib-intra-step.exp: first-hit
step^M
^M
Program received signal SIGABRT, Aborted.^M
0x00003fffb7cbe578 in __GI_raise (sig=<optimized out>) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56^M
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);^M
(gdb) FAIL: gdb.base/solib-intra-step.exp: second-hit
->
29 shlib_second (); /* first-hit */^M
(gdb) PASS: gdb.base/solib-intra-step.exp: first-hit
step^M
shlib_second () at ./gdb.base/solib-intra-step-lib.c:23^M
23 abort (); /* second-hit */^M
(gdb) PASS: gdb.base/solib-intra-step.exp: second-hit
This is because gdbarch_skip_trampoline_code() will resolve the final function
as shlib_second+0 and place there the breakpoint, but ld.so will jump after
the breakpoint - at shlib_second+8 - as it is ELFv2 local symbol optimization:
Dump of assembler code for function shlib_second:
0x0000000000000804 <+0>: addis r2,r12,2
0x0000000000000808 <+4>: addi r2,r2,30668
0x000000000000080c <+8>: mflr r0
Currently gdbarch_skip_entrypoint() has been called in skip_prologue_sal() and
fill_in_stop_func() but that is not enough. I believe
gdbarch_skip_entrypoint() should be called after every
gdbarch_skip_trampoline_code().
gdb/ChangeLog
2015-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* linespec.c (minsym_found): Call gdbarch_skip_entrypoint.
* ppc64-tdep.c (ppc64_skip_trampoline_code): Rename to ...
(ppc64_skip_trampoline_code_1): ... here.
(ppc64_skip_trampoline_code): New wrapper function.
* symtab.c (find_function_start_sal): Call gdbarch_skip_entrypoint.
gdb/testsuite/ChangeLog
2015-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.opt/solib-intra-step-lib.c: New file.
* gdb.opt/solib-intra-step-main.c: New file.
* gdb.opt/solib-intra-step.exp: New file.
gdb.threads/non-ldr-exc-3.exp is sometimes failing like this:
[Switching to Thread 6831.6832]
Breakpoint 2, thread_execler (arg=0x0) at /home/pedro/gdb/mygit/build/../src/gdb/testsuite/gdb.threads/non-ldr-exc-3.c:41
41 if (execl (image, image, argv1, NULL) == -1) /* break-here */
PASS: gdb.threads/non-ldr-exc-3.exp: lock-sched=on,non-stop=off: continue to breakpoint
(gdb) set scheduler-locking on
(gdb) FAIL: gdb.threads/non-ldr-exc-3.exp: lock-sched=on,non-stop=off: set scheduler-locking on
The problem is that the gdb_test_multiple is missing the prompt
anchor. The problem was introduced by 2fd33e9448. This reverts the
hunk that introduced the problem, reverting back to
gdb_continue_to_breakpoint.
gdb/testsuite/ChangeLog:
2015-09-15 Pedro Alves <palves@redhat.com>
* gdb.threads/non-ldr-exc-3.exp (do_test): Use
gdb_continue_to_breakpoint instead of gdb_test_multiple.
This patch, relative to a tree with
https://sourceware.org/ml/gdb-patches/2015-08/msg00295.html, fixes
issues/crashes that trigger if something unexpected happens during a
hook-stop.
E.g., if the inferior disappears while running the hook-stop, we hit
failed assertions:
(gdb) define hook-stop
Type commands for definition of "hook-stop".
End with a line saying just "end".
>kill
>end
(gdb) si
Kill the program being debugged? (y or n) [answered Y; input not from terminal]
/home/pedro/gdb/mygit/build/../src/gdb/thread.c:88: internal-error: inferior_thread: Assertion `tp' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
I noticed that if a hook-stop issues a synchronous execution command,
we print the same stop event twice:
(gdb) define hook-stop
Type commands for definition of "hook-stop".
End with a line saying just "end".
>si
>end
(gdb) si
0x000000000040074a 42 args[i] = 1; /* Init value. */ <<<<<<< once
0x000000000040074a 42 args[i] = 1; /* Init value. */ <<<<<<< twice
(gdb)
In MI:
*stopped,reason="end-stepping-range",frame={addr="0x000000000040074a",func="main",args=[],file="threads.c",fullname="/home/pedro/gdb/tests/threads.c",line="42"},thread-id="1",stopped-threads="all",core="0"
*stopped,reason="end-stepping-range",frame={addr="0x000000000040074a",func="main",args=[],file="threads.c",fullname="/home/pedro/gdb/tests/threads.c",line="42"},thread-id="1",stopped-threads="all",core="0"
(gdb)
The fix has GDB stop processing the event if the context changed. I
don't expect people to be doing crazy things from the hook-stop.
E.g., it gives me headaches to try to come up a proper behavior for
handling a thread change from a hook-stop... (E.g., imagine the
hook-stop does thread N; step, with scheduler-locing on). I think the
most important bit here is preventing crashes.
The patch adds a new hook-stop.exp test that covers the above and also
merges in the old hook-stop-continue.exp and hook-stop-frame.exp into
the same framework.
gdb/ChangeLog:
2015-09-14 Pedro Alves <palves@redhat.com>
* infrun.c (current_stop_id): New global.
(get_stop_id, new_stop_id): New functions.
(fetch_inferior_event): Handle normal_stop proceeding the target.
(struct stop_context): New.
(save_stop_context, release_stop_context_cleanup)
(stop_context_changed): New functions.
(normal_stop): Return true if the hook-stop changes the stop
context.
* infrun.h (get_stop_id): Declare.
(normal_stop): Now returns int. Add documentation.
gdb/testsuite/ChangeLog:
2015-09-14 Pedro Alves <palves@redhat.com>
* gdb.base/hook-stop-continue.c: Delete.
* gdb.base/hook-stop-continue.exp: Delete.
* gdb.base/hook-stop-frame.c: Delete.
* gdb.base/hook-stop-frame.exp: Delete.
* gdb.base/hook-stop.c: New file.
* gdb.base/hook-stop.exp: New file.
This change is relevant only for standard DWARF (as opposed to the GNAT
encodings extensions): at the time of writing it only makes a difference
with GCC patches that are to be integrated: see in particular
<https://gcc.gnu.org/ml/gcc-patches/2015-07/msg01364.html>.
Given the following Ada declarations:
type Small is mod 2 ** 6;
type Array_Type is array (0 .. 9) of Small
with Pack;
type Array_Access is access all Array_Type;
A : aliased Array_Type := (1, 2, 3, 4, 5, 6, 7, 8, 9, 10);
AA : constant Array_Type := A'Access;
Before this change, we would get the following GDB session:
(gdb) print aa.all(2)
$1 = 3
(gdb) print aa(2)
$2 = 16
This is wrong: both expression should yield the same value: 3. The
problem is simply that the routine which handles accesses to arrays lack
general handling for packed arrays. After this patch, we have the
expected output:
(gdb) print aa.all(2)
$1 = 3
(gdb) print aa(2)
$2 = 3
gdb/ChangeLog:
* ada-lang.c (ada_value_ptr_subscript): Update the heading
comment. Handle packed arrays.
gdb/testsuite/ChangeLog:
* gdb.ada/access_to_packed_array.exp: New testcase.
* gdb.ada/access_to_packed_array/foo.adb: New file.
* gdb.ada/access_to_packed_array/pack.adb: New file.
* gdb.ada/access_to_packed_array/pack.ads: New file.
Tested on x86_64-linux, no regression.
