support. Incorporate most of tm-rs6000.h.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
(read_memory_addr): Define.
(pop_frame): Rename to rs6000_pop_frame.
(rs6000_pop_frame, rs6000_fix_call_dummy, rs6000_push_arguments,
rs6000_frame_saved_pc, rs6000_frame_chain): Remove non-generic
dummy frame handling.
(branch_dest, rs6000_pop_frame, rs6000_skip_trampoline_code,
rs6000_frame_saved_pc, frame_get_saved_regs,
frame_initial_stack_address, rs6000_frame_chain,
rs6000_convert_from_func_ptr_addr): Call read_memory_addr instead
of read_memory_integer.
(branch_dest, rs6000_pop_frame, rs6000_push_arguments,
rs6000_skip_trampoline_code, rs6000_frame_saved_pc,
frame_get_saved_regs, frame_initial_stack_address,
rs6000_frame_chain): Replace 4 with TDEP->wordsize.
(skip_prologue): Recognize some 64-bit stack adjustments.
(push_dummy_frame, pop_dummy_frame, set_processor,
show_processor): Delete.
(frame_get_saved_regs): Manipulate saved register addresses using
CORE_ADDR instead of int.
(rs6000_create_inferior): New function.
(register_names_*[]): Change to struct reg registers_*[].
(variants[]): Assimilate into multi-arch approach.
(register_names_*[], variants[]): Refer to pre-PowerPC
architectures as POWER instead of RS6000.
* rs6000-nat.c: Ubiquitous changes for 64-bit support.
(vmap_secs, xcoff_relocate_symtab): Cast addresses
to unsigned long to avoid sign-extension errors.
(set_host_arch): New function.
(xcoff_relocate_symtab): Try disabling usleep(36000) workaround.
(rs6000_core_fns): Use new bfd_target_xcoff_flavour.
(_initialize_core_rs6000): Initialize rs6000_set_host_arch_hook.
* symfile.c (find_sym_fns): Remove special xcoff kludge.
* xcoffread.c (secnum_to_bfd_section): Initialize args.objfile.
(process_linenos): Query line struct size from coff
backend instead of using compile-time constant.
(enter_line_range): Likewise.
(read_xcoff_symtab): Pass "XCOFF64" instead of "XCOFF" to
record_debugformat() if appropriate.
(process_xcoff_symbol): Access symbol addresses using
SYMBOL_VALUE_ADDRESS instead of SYMBOL_VALUE.
(read_symbol_lineno): Retrieve XCOFF64 symbol names from strtbl.
(scan_xcoff_symtab): Likewise. Query syment struct size from
coff backend instead of using compile-time constant.
(xcoff_sym_fns): Set flavour to bfd_target_xcoff_flavour.
* Makefile.in (INTERNAL_LDFLAGS): Add $(MH_LDFLAGS) to list of flags
that this Makefile variable get set to. (From Kevin Buettner.)
* config/powerpc/aix.mh (MH_LDFLAGS): Add linker flags so that
the TOC doesn't overflow. (From Kevin Buettner.)
* config/powerpc/tm-ppc-aix.h: Move config decisions to
multi-arched rs6000-tdep.c.
* config/rs6000/tm-rs6000.h: Likewise.
(GDB_MULTI_ARCH): Define.
(skip_trampoline_code): Rename to rs6000_skip_trampoline_code.
(is_magic_function_pointer): Replace with
rs6000_convert_from_func_ptr_addr.
(TARGET_CREATE_INFERIOR_HOOK): Define.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
* config/rs6000/nm-rs6000.h (CHILD_XFER_MEMORY): Define.
(FIX_CALL_DUMMY): Redefined to call i386_fix_call_dummy.
(i386_fix_call_dummy): Add prototype.
* i386-tdep.c (i386_fix_call_dummy): New function based on the
code from the old FIX_CALL_DUMMY macro.
* config/i386/tm-embed.h: New file. Specific for embedded targets
like i386-elf, i386-coff and i386-aout.
* config/i386/embed.mt (): Specify tm-embed.h instead of the System V
header file.
before deleting and restoring it.
(safe_symbol_file_add): Ensure that gdb_stderr is flushed before reassigning
it.
(handle_load_dll): Split into two functions so that WFI can handle shared
library events.
(child_solib_loaded_library_pathname): New function.
(child_clear_solibs): New function. Clears shared library list.
(child_solib_add): New function. Adds shared library symbols.
(dll_symbol_command): New function. Handles "dll-symbol" command.
(info_dll_command): New function. Handles info "sharedlibrary" command.
(handle_exceptions): Eliminate 'ignore_trap' argument.
(get_child_debug_event): Eliminate two arguments. Return "pid" when
appropriate. Break out on most events to allow WFI to handle stuff.
(child_wait): Accomodate get_child_debug_event changes.
(child_attach): Clear thread list and list of loaded dlls.
(child_create_inferior): Clear list of loaded dlls. Use wait_for_inferior in a
loop to look for first "trap".
(child_resume): Avoid accessing a possibly-freed thread pointer.
(_initialize_inftarg): Add "dll-symbols", "sharedlibrary", and "info
dll", and "info sharedlibrary" commands.
* config/i386/tm-cygwin.h: Add some shared library (aka DLL) hooks.
* config/i386/nbsdelf.mt: New file.
* config/i386/tm-nbsdelf.h: New file.
* config/i386/tm-nbsd.h: change include of tm-nbsd.h to
the more explicit config/tm-nbsd.h.
and i[3456]86-*-netbsdelf*.
* config/i386/nm-nbsdelf.h: New file.
* config/i386/nbsdelf.mh: New file.
* config/i386/nm-nbsd.h: change include of nm-nbsd.h to
the more explicit config/nm-nbsd.h.
* config/i386/tm-nbsd.h: change include of tm-i386bsd.h to
tm-i386.h.
(SIGTRAMP_START, SIGTRAMP_END, SIGCONTEXT_PC_OFFSET): Define.
-------------------------------------------------------------------
* gregset.h: New file. Typedefs for gdb_gregset_t and
gdb_fpregset_t, prototypes for supply_gregset and friends.
* procfs.c: Include gregset.h. Delete local prototypes for
supply_gregset etc., and local typedef gdb_gregset_t etc.
* sol-thread.c: Include gregset.h, delete local prototypes,
add appropriate casts to gdb_gregset_t.
* uw-thread.c, lin-thread.c, core-sol2.c, core-regset.c,
sparc-tdep.c, ptx4-nat.c, ppc-linux-nat.c, mipsv4-nat.c,
m88k-nat.c, m68klinux-nat.c, m68k-tdep.c, irix5-nat.c,
irix4-nat.c, ia64-linux-nat.c, i386v4-nat.c, cxux-nat.c,
arm-linux-nat.c, alpha-nat.c: Include gregset.h.
* config/nm-linux.h: Define GDB_GREGSET_T, GDB_FPREGET_T.
* config/sparc/tm-sun4sol2.h: Ditto.
sim:
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
gdb:
* sh-tdep.c (sh_dsp_reg_names, sh3_dsp_reg_names): New arrays.
(sh_processor_type_table): Add entries for bfd_mach_sh_dsp and
bfd_mach_sh3_dsp.
(sh_show_regs): Floating point registers are called fr0-fr15.
For sh4, display fpul, fpscr and fr0-fr15 / dr0-dr14 as appropriate.
Handle sh-dsp and sh3-dsp.
config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): sh-dsp / sh3-dsp
don't have floating point registers.
(DSR_REGNUM, A0G_REGNUM, A0_REGNUM, A1G_REGNUM, A1_REGNUM): Define.
(M0_REGNUM, M1_REGNUM, X0_REGNUM, X1_REGNUM, Y0_REGNUM): Likewise.
(Y1_REGNUM, MOD_REGNUM, RS_REGNUM, RE_REGNUM, R0B_REGNUM): Likewise.
Make Sparc a Multi-Arch target. Discard PARAMS macro (require ANSI).
* sparc-tdep.c: include arch-utils.h.
(SPARC_HAS_FPU, FP_REGISTER_BYTES, FP_MAX_REG NUM, SPARC_INTREG_SIZE,
DUMMY_REG_SAVE_OFFSET): provide multi-arch-compatible definitions.
(GDB_TARGET_IS_SPARC64): make into a runtime test.
(struct frame_extra_info): Define, use instead of the macro.
(Many places): Use alloca instead of statically allocated buffers
that depend on a multi-arch variable such as MAX_REGISTER_RAW_SIZE.
(sparc_extract_struct_value_address): Accept a pointer arg instead
of an array sized by REGISTER_BYTES.
(examine_prologue): Accept a pointer to an array of CORE_ADDR,
instead of the defunct struct frame_saved_regs. Recognize new
Sparc64 store instructions as part of the prologue. Ignore the
destination of a frame store when parsing the prologue (so long
as it's on the stack).
(sparc_push_dummy_frame): Fix incorrect buffer offset for PSTATE.
(sparc_frame_find_saved_regs): Accept a ptr to an array of CORE_ADDR
instead of the defunct struct frame_saved_regs.
(supply_gregset): Discard unnecessary 'zerobuf': just send NULL to
supply_register. Provide 4-byte offset to compensate for diff
between size of the prgreg_t elements on a 64-bit host and size
of the registers for a 32-bit target. Fill all inaccessible regs
with zero so they won't keep being requested again and again.
(fill_gregset): Handle 32/64 size difference between registers
and prgreg_t. Handle as many new 64-bit regs as possible.
(supply_fpregset, fill_fpregset): Attempt to handle 64-bit world.
(sparc_push_arguments): Rename to sparc32_push_arguments.
Copy arguments into registers as well as onto stack, so that the
CALL_DUMMY (code pushed onto the target stack) is not required.
(sparc_extract_return_value): Rename to sparc32_extract_return_value.
(sparc_store_return_value): Use memset instead of bzero.
Use write_register_gen instead of write_register_bytes.
(sparclet_store_return_value): New function.
(_initialize_sparc_tdep): Call register_gdbarch_init to activate
the gdbarch multi-architecture system.
(sp64_push_arguments): Rename to sparc64_push_arguments.
Extend to store arguments in general registers as well as on stack.
(sparc64_extract_return_value): Rename to sp64_extract_return_value.
Use as a private function, to be called by the new external function
sparc64_extract_return_value.
(sparclet_extract_return_value): New function.
(sparc32_stack_align, sparc64_stack_align, sparc32_register_name,
sparc64_register_name, sparc_print_extra_frame_info,
sparclite_register_name, sparclet_register_name,
sparc_push_return_address, sparc64_use_struct_convention,
sparc32_store_struct_return, sparc64_store_struct_return,
sparc32_register_virtual_type, sparc64_register_virtual_type,
sparc32_register_size, sparc64_register_size,
sparc32_register_byte, sparc64_register_byte,
sparc_gdbarch_skip_prologue, sparc_convert_to_virtual,
sparc_convert_to_raw, sparc_frame_init_saved_regs,
sparc_frame_address, sparc_gdbarch_fix_call_dummy,
sparc_coerce_float_to_double, sparc_call_dummy_address,
sparc_y_regnum, sparc_reg_struct_has_addr, sparc_intreg_size,
sparc_return_value_on_stack): New functions supporting multi-arch.
(sparc_gdbarch_init): New function; initialize multi-arch.
(struct gdbarch_tdep): Define, use for private multi-arch data.
* config/sparc/tm-sparc.h: Move definitions around, enclose with
#ifdef GDB_MULTI_ARCH tests, provide some multi-arch alternate
definitions. Add enums for register names, to help debugging gdb.
This header file must work for non-multi-arch and for multi-arch.
* config/sparc/tm-sp64.h: Add GDB_MULTI_ARCH configuration. Also add
AT_ENTRY_POINT definitions for CALL_DUMMY, for non-multi-arch case.
Define GDB_MULTI_ARCH.
* config/sparc/tm-sparclet.h: Add GDB_MULTI_ARCH configuration.
Do not define GDB_MULTI_ARCH (bfd does not correctly identify target).
* config/sparc/tm-sparclite.h: Ditto.
* config/sparc/tm-sun4sol2.h: Define GDB_MULTI_ARCH.
* sparclet-rom.c (sparclet_regnames): Initialize explicitly, to
avoid using deprecated REGISTER_NAMES macro.
* Makefile.in: Let sparc-tdep.c depend on arch-utils.h.
with the version name.
* config/djgpp/djconfig.sh: Use more warning switches.
* config/djgpp/fnchange.lst: Replace the leading gdb-0222 with the
@V@ placebo.
(mempool): Just free any buffer prior to reuse. Don't bother with realloc.
(flag_single_step): New function.
(skip_message): Detect "helpful" Windows CE messages and skip sending them to
the host.
(wait_for_debug_event): Use skip_message to avoid sending debug messages to the
host.
(dispatch): Prelimary implementation of single step detection.
* wince.c: Rework SH single stepping code to be more consistent with other
wince targets.
(handle_output_debug_string): Allow first chance exceptions to come through
since they seem to be all that we get on some versions of Windows CE.
(check_for_step): New function, conditionally compiled based on target.
(regptr): Delete obsolete function.
(handle_exception): Detect illegal instructions.
(get_child_debug_event): Return success only if event code matches target.
(child_create_inferior): Reflect change to get_child_debug_event arguments.
2000-04-20 Scott Bambrough <scottb@netwinder.org>
* arm-linux-nat.c (PIDGET, TIDGET): New.
(get_thread_id, GET_THREAD_ID): New.
(fetch_nwfpe_register, store_nwfpe_register): New.
(fetch_register, store_register): New.
(fetch_fpregister, store_fpregister): New.
(fill_gregset, supply_gregset): New.
(fill_fpregset, supply_fpregset): New.
(fetch_fpregs): Modified to use thread id's.
(store_fpregs): Modified to use thread id's and
fetch_nwfpe_register.
(fetch_regs): Modified to use thread id's.
(store_regs): Modified to use thread id's.
(fetch_inferior_registers): Modified to handle single register
fetches.
(store_inferior_registers): Modified to handle single register
stores.
(arm_linux_register_u_addr): Removed.
* configure.tgt: Added gdbserver to configdirs for arm*-*-linux*.
* config/arm/linux.mh
(NATDEPFILES): Removed core-aout.o. Added core-regset.o.
(LOADLIBES): Define.
* config/arm/nm-linux.h: Include config/nm-linux.h.
(ATTACH_DETACH): Removed. Defined in config/nm-linux.h.
(REGISTER_U_ADDR): Removed.
(SVR4_SHARED_LIBS): Removed. Defined in config/nm-linux.h.
(#include "solib.h"): Removed. Included via config/nm-linux.h.
