* config/tc-mips.c (macro_build): Accept 'z', and ignore it.
(macro): Use "z,s,t" for div instructions to match corresponding
change in opcode table.
(mips_ip): Added 'z'--must be zero register.
load_register.
(set_at_unsigned): Removed; changed callers to use set_at.
(load_register): Removed unused ip argument. Changed callers.
(append_insn): Don't swap branch and branch likely.
(macro_build): Handle 'u'.
(load_register): Handle 64 bit constants.
(macro): Added M_DABS, removed M_ABSU. Numerous changes to
support 64 bit constants.
(mips_ip): Use hex constants in range checks for clarity.
(md_number_to_chars): Support 8 byte values.
(md_begin): Initialize mips_isa based on TARGET_CPU. Don't sanity
check macros. Set text alignment and GP size here.
(md_assemble): Don't set text alignment and GP size here.
(append_insn): Don't insert NOPs for load delays if mips_isa >= 2.
Use the right mask and shift for WRITE_FPR_T and WRITE_FPR_S. Add
a NOP after a branch likely.
(mips_emit_delays): Don't insert NOPS for load delays if mips_isa
>= 2.
(macro): Support r6000 and r4000 macros.
(mips_ip): Check insn ISA level against mips_isa before using it.
Added 'x' case for ignored register.
(md_parse_option): Handle -mipsN and -mcpu=XX.
if .set nobopt or .set volatile.
(gp_reference): .lit8 and .lit4 are accessed via the GP register.
(macro): Added cases M_LI_S, M_LI_SS. Fixed M_LI_D and M_LI_DD.
(mips_ip): Added cases 'F', 'L', 'f', 'l' for floating point.
* config/obj-ecoff.c: Renamed some variables to avoid shadow
warnings.
davidj@ICSI.Berkeley.EDU (David Johnson): Don't accept symbolic
names for 'E' and 'G' argument types (coprocessor registers) and
don't warn if $1 is used on the coprocessor.
* config/tc-mips.c: Many changes to support simple assembler
optimization.
(insn_label, prev_insn, prev_prev_insn, dummy_opcode,
prev_insn_valid, prev_insn_frag, prev_insn_where,
prev_insn_fixp, prev_insn_is_delay_slot): New static
variables.
(insn_uses_reg, mips_no_prev_insn, mips_emit_delays,
mips_align, s_stringer, s_mips_space): New static functions.
(mips_define_label): New global function.
(md_pseudo_table): For "ascii", "asciz", "asciiz", call
s_stringer. Changed argument to float_cons from 0 or 1 to 'f'
or 'd'. For "space" call s_mips_space.
(md_begin): Call mips_no_prev_insn.
(append_insn): Only insert necessary NOP instructions.
(macro): Call mips_emit_delays before setting mips_noreorder.
Increment and decrement mips_noreorder rather than using
save_reorder_condition. Don't bother to use noreorder in
M_L_DOB and M_L_DAB, since append_insn will not insert a NOP.
(md_atof): Handle floating point numbers correctly for both
big and little endian targets.
(s_align, s_cons): Call mips_align rather than frag_align.
(s_change_seg, s_cons): Call mips_emit_delays.
(s_float_cons): Let float_cons do the work.
(s_mipsset): Call mips_emit_delays when setting noreorder.
* config/tc-mips.h (tc_frob_label): Define to be
mips_define_label.
* config/tc-mips.c: Include opcode/mips.h rather than
mips-opcode.h.
(append_insn): An extra NOP is only needed after instructions
which set HI or LO, not after instructions which read it.
(macro_build, mips_ip): Support new 'E', 'G' and 'B' arguments.
(macro): cfc1 and ctc1 now take "t,G" rather than "t,d".
* config/tc-mips.h (struct mips_opcode): Don't define.
* config/mips-big.mt, config/mips-lit.mt (TARG_CPU_DEPENDENTS):
Set to $(srcdir)/../include/opcode/mips.h.
Get the MIPS assembler up to speed with other gas changes:
* config/obj-ecoff.c (ecoff_set_vma, ecoff_frob_symbol):
Removed; don't change the symbol value.
(ecoff_build_symbols, ecoff_build_procs, ecoff_frob_file): Use
bfd_asymbol_value rather than S_GET_VALUE to include section
vma in symbol value.
(ecoff_frob_file): Ignore BSF_SECTION_SYM symbols, since ECOFF
doesn't output them. Set the vma of sections.
* config/obj-ecoff.h: Don't define obj_frob_symbol.
* config/tc-mips.c (tc_gen_reloc): Adjustment by section vma is no
longer necessary.
(various): use valueT rather than long.
comment_chars.
(do_scrub_next_char): If a line comment character is not at the
start of a line, treat it as a comment character if it is one.
For a CPP line comment use pseudo-op .appline rather than .line.
* input-scrub.c (logical_input_line): Make int rather than
unsigned.
(input_scrub_push, input_scrub_begin): Initialize
logical_input_line to -1 rather than 0.
(bump_line_counters): Increment logical_input_line.
(new_logical_line): If line_number is -2, decrement
logical_input_line.
(as_where): Use logical_input_line even if it is 0.
* read.h (s_app_file prototype): Now takes an int argument.
* read.c (potable): Make .appfile call s_app_file with 1. New
.appline pseudo-op calls s_app_line.
(s_app_file): If .appfile, call new_logical_line with -2 to
account for newline inserted by do_scrub_next_char. If listing,
call listing_source_file.
(s_app_line): New function to handle fake pseudo-op .appline.
* config/obj-coff.c (obj_pseudo_table): Make .appline call
obj_coff_ln.
(obj_coff_ln): Added argument to indicate whether .appline.
* config/obj-coffbfd.c (obj_pseudo_table): Make .appline call
obj_coff_ln.
(obj_coff_ln): Added argument to indicate whether .appline.
* config/tc-mips.c (s_file): Pass argument to s_app_file.
* as.c (perform_an_assemly_pass): Don't set output_section here.
* expr.c (expr_part, expr): Turn off section assertions for ECOFF,
since it has additional sections.
* read.c (s_lcomm): For MIPS ECOFF, put small objects in .sbss,
not bss_section.
* config/obj-ecoff.h (TARGET_SYMBOL_FIELDS): Added
ecoff_undefined field.
* config/obj-ecoff.c (obj_symbol_new_hook): Initialize
ecoff_undefined field.
(add_file): If using stabs, just output a stabs symbol rather than
creating a new fdr.
(obj_ecoff_begin, obj_ecoff_bend): Ignore line number by reading
it with get_absolute_expression, rather than skipping it by hand.
(obj_ecoff_loc): If using stabs, just output a stabs symbol rather
than ECOFF line number information.
(obj_ecoff_stab): Accept non-zero values for stabs line number.
(ecoff_build_symbols): Set ifilesym correctly. Set storage class
to small, undefined and/or readonly sections if appropriate.
Don't output symbol names containing \001 characters.
(ecoff_frob_file): Make sure at least one fdr is output.
* config/tc-mips.h: Define TC_MIPS.
* config/tc-mips.c (g_switch_value): New static variable.
(md_assemble): Set gp size of output BFD.
(gp_reference): New function; returns 1 if expression can be
accesssed via gp. Always returns 0 if not using ECOFF.
(macro_build): Convert BFD_RELOC_LO16 to BFD_RELOC_MIPS_GPREL if
possible.
(macro): Generate sequences using gp if possible.
(md_parse_option): Ignore -EL and -EB. Parse -G.
(md_apply_fix): Added BFD_RELOC_MIPS_GPREL to ignored case.
(s_change_sec): Handle .rdata and .sdata for ECOFF.
(s_extern): Mark symbol as external. Set ecoff_undefined field.
dropping a space immediately following an identifier.
* expr.c, write.c: Rewrote assert expressions to not use multiple
lines; I don't think that can be done portably.
* config/tc-mips.c (macro): Use $AT if target register is zero in
load instruction, which it can be for a floating point load.
Also a bunch more changes to config/obj-ecoff.c, still in flux.
the section contents.
* config/obj-ecoff.h, config/obj-ecoff.c: Numerous changes to get
symbol table and values right.
* config/tc-mips.h (LOCAL_LABEL): If OBJ_ECOFF, any label starting
with $L is local.
* config/tc-mips.c (tc_gen_reloc): If OBJ_ECOFF, adjust the addend
by the section vma.
* config/z8k.mt (TARG_CPU_DEPENDENTS): The relevant file is
z8k-opc.h, not z8k.h.
