Commit graph

40 commits

Author SHA1 Message Date
Joel Brobecker
0fb0cc7590 Updated copyright notices for most files. 2009-01-03 05:58:08 +00:00
Bob Wilson
d0107bb6ae gdb/
* xtensa-config.c (rmap): Remove entries for ar32 through ar63.  Add
	threadptr, scompare1, mmid, epc5, epc6, epc7, eps5, eps6, eps7,
	excsave5, excsave6, excsave7, cpenable, and vecbase registers.
	(xtensa_submask0, xtensa_submask1, xtensa_submask2)
	(xtensa_submask3, xtensa_submask4, xtensa_submask5, xtensa_submask6)
	(xtensa_submask7, xtensa_submask8, xtensa_submask9, xtensa_submask10)
	(xtensa_submask11, xtensa_submask12, xtensa_submask13, xtensa_submask14)
	(xtensa_submask15): Adjust register numbers.
	* xtensa-xtregs.c (XTENSA_ELF_XTREG_SIZE): Change to 4.
	(xtensa_regmap_table): Add entry for scompare1.
	* regformats/reg-xtensa.dat: Remove ar32 through ar63.  Add threadptr
	and scompare1.
gdb/gdbserver/
	* xtensa-xtregs.c (XTENSA_ELF_XTREG_SIZE): Change to 4.
	(xtensa_regmap_table): Add entry for scompare1.
2008-11-19 18:29:47 +00:00
Thiago Jung Bauermann
2c4ad78125 gdb/
* features/Makefile (rs6000/powerpc-isa205-32l-expedite,
	rs6000/powerpc-isa205-altivec32l-expedite,
	powerpc-isa205-vsx32l-expedite, rs6000/powerpc-isa205-64l-expedite,
	rs6000/powerpc-isa205-altivec64l-expedite,
	powerpc-isa205-vsx64l-expedite): New variables.
	* regformats/rs6000/powerpc-isa205-32l.dat: Generate.
	* regformats/rs6000/powerpc-isa205-altivec32l.dat: Generate.
	* regformats/rs6000/powerpc-isa205-vsx32l.dat: Generate.
	* regformats/rs6000/powerpc-isa205-64l.dat: Generate.
	* regformats/rs6000/powerpc-isa205-altivec64l.dat: Generate.
	* regformats/rs6000/powerpc-isa205-vsx64l.dat: Generate.

gdbserver/
	* Makefile.in (powerpc-isa205-32l.o, powerpc-isa205-32l.c,
	powerpc-isa205-altivec32l.o, powerpc-isa205-altivec32l.c,
	powerpc-isa205-vsx32l.o, powerpc-isa205-vsx32l.c,
	powerpc-isa205-64l.o, powerpc-isa205-64l.c,
	powerpc-isa205-altivec64l.o, powerpc-isa205-altivec64l.c,
	powerpc-isa205-vsx64l.o, powerpc-isa205-vsx64l.c): New targets.
	* configure.srv (powerpc*-*-linux*): Add ISA 2.05 object files and
	XML target descriptions.
	* linux-ppc-low.c (ppc_arch_setup): Init registers with 64-bit FPSCR
	when inferior is running on an ISA 2.05 or later processor.  Add
	special case to return offset for full 64-bit slot of FPSCR when
	in 32-bits.
2008-11-18 21:48:48 +00:00
Daniel Jacobowitz
dfb64f85d3 2008-11-14 Daniel Gutson <dgutson@codesourcery.com>
* configure.tgt (sparc64-*-linux*): Added gdbserver support.
	* regformats/reg-sparc64.dat: New file.

gdbserver/
2008-11-14  Daniel Gutson  <dgutson@codesourcery.com>

	* Makefile.in (SFILES, clean): Added sparc64 files.
	(reg-sparc64.o, reg-sparc64.c): New.
	* configure.srv (sparc*-*-linux*): New configuration.
	* linux-low.c (regsets_fetch_inferior_registers): Swap ptrace
	syscall arguments for SPARC.
	(regsets_store_inferior_registers): Likewise.
	* linux-sparc-low.c: New file.
2008-11-14 22:06:41 +00:00
Luis Machado
604c2f837c * rs6000-tdep: Include "features/rs6000/powerpc-vsx32.c".
Include "features/rs6000/powerpc-vsx64.c".
	(ppc_supply_vsxregset): New function.
	(ppc_collect_vsxregset): New function.
	(IS_VSX_PSEUDOREG): New macro.
	(IS_EFP_PSEUDOREG): New macro.
	(vsx_register_p): New function.
	(ppc_vsx_support_p): New function.
	(rs6000_builtin_type_vec128): New function.
	(rs6000_register_name): Hide upper halves of vs0~vs31.  Return
	correct names for VSX registers and EFPR registers.
	(rs6000_pseudo_register_type): Return correct types for VSX
	and EFPR registers.
	(rs6000_pseudo_register_reggroup_p): Return correct group for
	VSX and EFPR registers.
	(ppc_pseudo_register_read): Rename to dfp_pseudo_register_read.
	(ppc_pseudo_register_write): Rename to dfp_pseudo_register_write.
	(vsx_pseudo_register_read): New function.
	(vsx_pseudo_register_write): New function.
	(efpr_pseudo_register_read): New function.
	(efpr_pseudo_register_write): New function.
	(rs6000_pseudo_register_read): Call new VSX and EFPR read functions.
	(rs6000_pseudo_register_write): Call new VSX and EFPR write functions.
	(rs6000_gdbarch_init): Declare have_vsx.
	Initialize new upper half VSX registers.
	Initialize VSX-related and EFPR-related pseudo-registers variables.
	Adjust the number of pseudo registers accordingly.

	* ppc-linux-nat.c: Define PTRACE_GETVSXREGS, PTRACE_SETVSXREGS
	and SIZEOF_VSRREGS.
	(gdb_vsxregset_t): New type.
	(have_ptrace_getsetvsxregs): New variable.
	(fetch_vsx_register): New function.
	(fetch_register): Handle VSX registers.
	(fetch_vsx_registers): New function.
	(fetch_ppc_registers): Handle VSX registers.
	(store_ppc_registers): Handle VSX registers.
	(store_vsx_register): New function.
	(store_register): Handle VSX registers.
	(store_vsx_registers): New function.
	(ppc_linux_read_description): Handle VSX-enabled inferiors.
	(gdb_vsxregset_t): New type.
	(supply_vsxregset): New function.
	(fill_vsxregset): New function.

	* ppc-tdep.h (vsx_register_p): New prototype.
	(vsx_support_p): New prototype.
	(ppc_vsr0_regnum): New variable.
	(ppc_vsr0_upper_regnum): Likewise.
	(ppc_efpr0_regnum): Likewise.
	(ppc_builtin_type_vec128): New type.
	(ppc_num_vsrs): New constant.
	(ppc_num_vshrs): New constant.
	(ppc_num_efprs): Likewise.
	Define POWERPC_VEC_VSX PPC_VSR0_UPPER_REGNUM and PPC_VSR31_UPPER_REGNUM.
	(ppc_supply_vsxregset): New prototype.
	(ppc_collect_vsxregset): New prototype.

	* ppc-linux-tdep.c: Include "features/rs6000/powerpc-vsx32l.c"
	Include "features/rs6000/powerpc-vsx64l.c".
	(_initialize_ppc_linux_tdep): Initialize VSX-enabled targets.
	(ppc_linux_regset_sections): Add new ".reg-ppc-vsx" field.
	(ppc32_linux_vsxregset): New 32-bit VSX-enabled regset.
	(ppc_linux_regset_from_core_section): Handle VSX core section.
	(ppc_linux_core_read_description): Support VSX-enabled core files.

	* ppc-linux-tdep.h: Declare *tdesc_powerpc_vsx32l
	Declare tdesc_powerpc_vsx64l

	* corelow.c (get_core_register_section): Support VSX-enabled
	core files.

	* features/rs6000/power-vsx.xml: New VSX descriptions.
	* features/rs6000/powerpc-vsx32.xml: New file.
	* features/rs6000/powerpc-vsx32l.xml: New file.
	* features/rs6000/powerpc-vsx64.xml: New file.
	* features/rs6000/powerpc-vsx64l.xml: New file.
	* features/rs6000/powerpc-vsx32.c: New file (generated).
	* features/rs6000/powerpc-vsx32l.c: New file (generated).
	* features/rs6000/powerpc-vsx64.c: New file (generated).
	* features/rs6000/powerpc-vsx64l.c: New file (generated).
	* features/Makefile: Updated with new descriptions.
	* regformats/rs6000/powerpc-vsx32l.dat: New file (generated).
	* regformats/rs6000/powerpc-vsx64l.dat: New file (generated).

	* testsuite/gdb.arch/vsx-regs.c: New source file.
	* testsuite/gdb.arch/vsx-regs.exp: New testcase.
	* testsuite/lib/gdb.exp (skip_vsx_tests): New function.
2008-08-15 15:18:34 +00:00
Ulrich Weigand
7284e1bed8 ChangeLog:
* Makefile.in (ppc_linux_tdep_h): New macro.
	(powerpc_32l_c, powerpc_altivec32_c, powerpc_altivec32l_c): Likewise.
	(powerpc_64l_c, powerpc_altivec64_c, powerpc_altivec64l_c): Likewise.
	(powerpc_e500l_c): Likewise.
	(ppc-linux-nat.o): Update dependencies.
	(ppc-linux-tdep.o): Update dependencies.
	(rs6000-tdep.o): Update dependencies.

	* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Remove.
	(ppc_linux_svr4_fetch_link_map_offsets): Remove.
	(ppc_linux_gregset, ppc_linux_fpregset): Move to ppc-linux-tdep.h
	(ppc_supply_reg, ppc_collect_reg): Add prototypes.
	(tdesc_powerpc_e500): Remove.

	* rs6000.c: Include "features/rs6000/powerpc-altivec32.c"
	and "features/rs6000/powerpc-altivec64.c".
	(ppc_supply_reg, ppc_collect_reg): Make global.
	(variants): Use tdesc_powerpc_32 for "powerpc" and
	tdesc_powerpc_altivec64 for "powerpc64".
	(_initialize_rs6000_tdep): Initialize AltiVec descriptions.

	* ppc-linux-tdep.h: New file.

	* ppc-linux-tdep.c: Include "ppc-linux-tdep.c".
	Include "features/rs6000/powerpc-32l.c".
	Include "features/rs6000/powerpc-altivec32l.c".
	Include "features/rs6000/powerpc-64l.c".
	Include "features/rs6000/powerpc-altivec64l.c".
	Include "features/rs6000/powerpc-e500l.c".
	(ppc_linux_supply_gregset): New function.
	(ppc_linux_collect_gregset): Handle orig_r3 and trap registers.
	(ppc32_linux_gregset): Use ppc_linux_supply_gregset.
	(ppc64_linux_gregset): Likewise.
	(ppc_linux_sigtramp_cache): Handle orig_r3 and trap registers.
	(ppc_linux_trap_reg_p): New function.
	(ppc_linux_write_pc): New function.
	(ppc_linux_core_read_description): New function.
	(ppc_linux_init_abi): Install ppc_linux_write_pc and
	ppc_linux_core_read_description.  Install orig_r3 and trap
	registers if present in the target description.
	(_initialize_ppc_linux_tdep): Initialize Linux target descriptions.

	* ppc-linux-nat.c: Include "ppc-linux-tdep.h".
	(PT_ORIG_R3, PT_TRAP): Define if necessary.
	(ppc_register_u_addr): Handle orig_r3 and trap registers.
	(fetch_ppc_registers): Likewise.
	(store_ppc_registers): Likewise.
	(store_register): Likewise.
	(ppc_linux_read_description): Check whether AltiVec is supported.
	Check whether inferior is 32-bit or 64-bit.  Return the appropriate
	Linux target description.

	* features/Makefile (WHICH): Use rs6000/powerpc-32l and
	rs6000/powerpc-altivec32l instead of rs6000/powerpc-32.
	Use rs6000/powerpc-64l and rs6000/powerpc-altivec64l instead
	of rs6000/powerpc-64.  Use rs6000/powerpc-e500l instead of
	rs6000/powerpc-e500.  Update -expedite variables accordingly.

	* features/rs6000/power-spe.xml: Use regnum 73 for "acc".
	* features/rs6000/powerpc-32.xml: Do not include power-altivec.xml.
	* features/rs6000/powerpc-64.xml: Do not include power-altivec.xml.
	* features/rs6000/powerpc-e500.c: Regenerate.
	* features/rs6000/powerpc-32.c: Regenerate.
	* features/rs6000/powerpc-64.c: Regenerate.

	* features/rs6000/power-linux.xml: New file.
	* features/rs6000/power64-linux.xml: New file.
	* features/rs6000/powerpc-32l.xml: New file.
	* features/rs6000/powerpc-altivec32l.xml: New file.
	* features/rs6000/powerpc-64l.xml: New file.
	* features/rs6000/powerpc-altivec64l.xml: New file.
	* features/rs6000/powerpc-e500l.xml: New file.
	* features/rs6000/powerpc-32l.c: New (generated) file.
	* features/rs6000/powerpc-altivec32l.c: New (generated) file.
	* features/rs6000/powerpc-64l.c: New (generated) file.
	* features/rs6000/powerpc-altivec64l.c: New (generated) file.
	* features/rs6000/powerpc-e500l.xml: New (generated) file.

	* regformats/reg-ppc.dat: Remove.
	* regformats/reg-ppc64.dat: Remove.
	* regformats/rs6000/powerpc-32.dat: Remove.
	* regformats/rs6000/powerpc-64.dat: Remove.
	* regformats/rs6000/powerpc-e500.dat: Remove.
	* regformats/rs6000/powerpc-32l.dat: New (generated) file.
	* regformats/rs6000/powerpc-altivec32l.dat: New (generated) file.
	* regformats/rs6000/powerpc-64l.dat: New (generated) file.
	* regformats/rs6000/powerpc-altivec64l.dat: New (generated) file.
	* regformats/rs6000/powerpc-e500l.dat: New (generated) file.

gdbserver/ChangeLog:

	* configure.srv (powerpc*-*-linux*): Set srv_regobj to
	powerpc-32l.o, powerpc-altivec32l.o, powerpc-e500l.o,
	powerpc-64l.o, and powerpc-altivec64l.o.
	Remove rs6000/powerpc-32.xml, rs6000/powerpc-64.xml, and
	rs6000/powerpc-e500.xml; add rs6000/powerpc-32l.xml,
	rs6000/powerpc-altivec32l.xml, rs6000/powerpc-e500l.xml,
	rs6000/powerpc-64l.xml, rs6000/powerpc-altivec64l.xml,
	rs6000/power-linux.xml, and rs6000/power64-linux.xml
	to srv_xmlfiles.

	* Makefile.in (reg-ppc.o, reg-ppc.c): Remove, replace by ...
	(powerpc-32l.o, powerpc-32l.c): ... these new rules.
	(powerpc-32.o, powerpc-32.c): Remove, replace by ...
	(powerpc-altivec32l.o, powerpc-altivec32l.c): ... these new rules.
	(powerpc-e500.o, powerpc-e500.c): Remove, replace by ...
	(powerpc-e500l.o, powerpc-e500l.c): ... these new rules.
	(reg-ppc64.o, reg-ppc64.c): Remove, replace by ...
	(powerpc-64l.o, powerpc-64l.c): ... these new rules.
	(powerpc-64.o, powerpc-64.c): Remove, replace by ...
	(powerpc-altivec64l.o, powerpc-altivec64l.c): ... these new rules.
	(clean): Update.

	* linux-ppc-low.c (init_registers_ppc): Remove, replace by ...
	(init_registers_powerpc_32l): ... this new prototype.
	(init_registers_powerpc_32): Remove, replace by ...
	(init_registers_powerpc_altivec32l): ... this new prototype.
	(init_registers_powerpc_e500): Remove, replace by ...
	(init_registers_powerpc_e500l): ... this new prototype.
	(init_registers_ppc64): Remove, replace by ...
	(init_registers_powerpc_64l): ... this new prototype.
	(init_registers_powerpc_64): Remove, replace by ...
	(init_registers_powerpc_altivec64l): ... this new prototype.
	(ppc_num_regs): Set to 73.
	(PT_ORIG_R3, PT_TRAP): Define if necessary.
	(ppc_regmap, ppc_regmap_e500): Add values for orig_r3 and trap.
	(ppc_cannot_store_register): Handle orig_r3 and trap.
	(ppc_arch_setup): Update init_registers_... calls.
	(ppc_fill_gregset): Handle orig_r3 and trap.

	* inferiors.c (clear_inferiors): Reset current_inferior.
2008-05-03 17:16:44 +00:00
Ulrich Weigand
221c031fac ChangeLog:
* features/Makefile (%.dat): Set xmltarget to the base filename
	of the XML source, without subdirectory.
	* regformats/rs6000/powerpc-32.dat: Regenerate.
	* regformats/rs6000/powerpc-64.dat: Regenerate.
	* regformats/rs6000/powerpc-e500.dat: Regenerate.

gdbserver/ChangeLog:

	* server.c (get_features_xml): Fix inverted condition.
	(handle_query): Always support qXfer:feature:read.
2008-03-27 13:11:52 +00:00
Ulrich Weigand
6fe305f7fb ChangeLog:
* regformats/reg-ppc.dat: Rename "ps" to "msr".
	* regformats/reg-ppc64.dat: Likewise.

gdbserver/ChangeLog:

	* configure.srv [powerpc64-*-linux*]: Add all files mentioned for
	powerpc-*-linux* to srv_regobj and reg_xmlfiles.
	* linux-ppc-low.c (ppc_get_pc): Support bi-arch operation.
	(ppc_set_pc): Likewise.
	(ppc_arch_setup): New function.
	(ppc_fill_gregset): Call ppc_collect_ptrace_register instead
	of collect_register.
	(the_low_target): Use ppc_arch_setup as arch_setup initializer.
2008-02-28 05:57:45 +00:00
Ulrich Weigand
9b4b61c8db ChangeLog:
* features/Makefile (%.dat): Emit xmltarget statement.

	* regformats/regdat.sh: Support xmltarget and xmlarch statments.
	Generate code to set gdbserver_xmltarget in init_registers_${name}.

	* regformats/arm-with-iwmmxt.dat: Regenerate.
	* regformats/mips64-linux.dat: Regenerate.
	* regformats/mips-linux.dat: Regenerate.
	* regformats/rs6000/powerpc-32.dat: Regenerate.
	* regformats/rs6000/powerpc-64.dat: Regenerate.
	* regformats/rs6000/powerpc-e500.dat: Regenerate.

	* regformats/reg-arm.dat: Add xmlarch statement.
	* regformats/reg-i386.dat: Likewise.
	* regformats/reg-i386-linux.dat: Likewise.
	* regformats/reg-x86-64-linux.dat: Likewise.
	* regformats/reg-spu.dat: Likewise.

gdbserver/ChangeLog:

	* regcache.h (gdbserver_xmltarget): Add extern declaration.
	* server.c (gdbserver_xmltarget): Define.
	(get_features_xml): Use it to replace "target.xml" and arch_string.

	* configure.srv: Remove srv_xmltarget.  Add XML files that were
	mentioned there to srv_xmlfiles instead.  Remove conditional tests
	on gdb_cv_arm_iwmmxt, gdb_cv_ppc_altivec, gdb_cv_ppc_spe; set
	srv_xmlfiles and srv_regobj to include all possible choices.
	* configure.ac (srv_xmltarget): Remove.
	(srv_xmlfiles): Do not add "target.xml".
	(gdb_cv_arm_iwmmxt, gdb_cv_ppc_altivec, gdb_cv_ppc_spe): Remove
	checks for supplementary target information.
	* configure: Regenerate.
	* Makefile.in (XML_TARGET): Remove.
	(target.xml): Remove rule.
	(clean): Do not clean up target.xml.
	(.PRECIOUS): Do not mention target.xml.

	* target.h (struct target_ops): Remove arch_string member.
	* linux-low.c (linux_arch_string): Remove.
	(linux_target_ops): Remove arch_string initializer.
	* linux-low.h (struct linux_target_ops): Remove arch_string member.
	* linux-i386-low.c (the_low_target): Remove arch_string initializer.
	* linux-x86-64-low.c (the_low_target): Remove arch_string initializer.
	* spu-low.c (spu_arch_string): Remove.
	(spu_target_ops): Remove arch_string initializer.
	* win32-low.c (win32_arch_string): Remove.
	(win32_target_ops): Remove arch_string initializer.
	* win32-low.h (struct win32_target_ops): Remove arch_string member.
	* win32-arm-low.c (the_low_target): Remove arch_string initializer.
	* win32-i368-low.c (the_low_target): Remove arch_string initializer.
2008-02-28 05:54:10 +00:00
Ulrich Weigand
d05b4ac3aa gdb/ChangeLog:
* regformats/regdat.sh: Rename init_registers function in
	generated file to init_registers_${name}.

	* regformats/reg-crisv32.dat: Set "name" to crisv32.
	* regformats/reg-ppc64.dat: Set "name" to ppc64.
	* regformats/reg-s390x.dat: Set "name" to s390x.

gdbserver/ChangeLog:

	* server.h (init_registers): Remove prototype.

	* linux-low.h (struct linux_target_ops): Add arch_setup field.
	* linux-low.c (initialize_low): Call the_low_target.arch_setup ()
	instead of init_registers ().
	* linux-arm-low.c (init_registers_arm): Add prototype.
	(init_registers_arm_with_iwmmxt): Likewise.
	(the_low_target): Add initializer for arch_setup field.
	* linux-cris-low.c (init_registers_cris): Add prototype.
	(the_low_target): Add initializer for arch_setup field.
	* linux-crisv32-low.c (init_registers_crisv32): Add prototype.
	(the_low_target): Add initializer for arch_setup field.
	* linux-i386-low.c (init_registers_i386_linux): Add prototype.
	(the_low_target): Add initializer for arch_setup field.
	* linux-ia64-low.c (init_registers_ia64): Add prototype.
	(the_low_target): Add initializer for arch_setup field.
	* linux-m32r-low.c (init_registers_m32r): Add prototype.
	(the_low_target): Add initializer for arch_setup field.
	* linux-m68k-low.c (init_registers_m68k): Add prototype.
	(the_low_target): Add initializer for arch_setup field.
	* linux-mips-low.c (init_registers_mips_linux): Add prototype.
	(init_registers_mips64_linux): Likewise.
	(the_low_target): Add initializer for arch_setup field.
	* linux-ppc-low.c (init_registers_ppc): Add prototype.
	(init_registers_powerpc_32, init_registers_powerpc_e500): Likewise.
	(the_low_target): Add initializer for arch_setup field.
	* linux-ppc64-low.c (init_registers_ppc64): Add prototype.
	(init_registers_powerpc_64): Likewise.
	(the_low_target): Add initializer for arch_setup field.
	* linux-s390-low.c (init_registers_s390): Add prototype.
	(init_registers_s390x): Likewise.
	(the_low_target): Add initializer for arch_setup field.
	* linux-sh-low.c (init_registers_sh): Add prototype.
	(the_low_target): Add initializer for arch_setup field.
	* linux-x86-64-low.c (init_registers_x86_64_linux): Add prototype.
	(the_low_target): Add initializer for arch_setup field.
	* linux-xtensa-low.c (init_registers_xtensa): Add prototype.
	(the_low_target): Add initializer for arch_setup field.

	* win32-low.h (struct win32_target_ops): Add arch_setup field.
	* win32-low.c (initialize_low): Call the_low_target.arch_setup ()
	instead of init_registers ().
	* win32-arm-low.c (init_registers_arm): Add prototype.
	(the_low_target): Add initializer for arch_setup field.
	* win32-i386-low.c (init_registers_i386): Add prototype.
	(the_low_target): Add initializer for arch_setup field.

	* spu-low.c (init_registers_spu): Add prototype.
	(initialize_low): Call initialie_registers_spu () instead of
	initialize_registers ().
2008-02-27 03:27:40 +00:00
Maxim Grigoriev
94a0e87711 2008-02-11 Maxim Grigoriev <maxim2405@gmail.com>
* NEWS (New native configurations): Xtensa GNU/Linux.
	(New targets): Xtensa GNU/Linux.
	* Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
	xtensa-linux-tdep.o
	(ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
	(xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
	* configure.tgt (xtensa*-*-linux*): New entry.
	* xtensa-config.c (xtensa_tdep): New variable.
	(xtensa_config_byte_order, xtensa_config_tdep): Removed.
	(rmap): Change format based on new macro XTREG.
	(XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
	* xtensa-linux-nat.c: New.
	* xtensa-linux-tdep.c: New.
	* xtensa-xtregs.c: New.
	* xtensa-tdep.h (xtensa_elf_gregset_t): Update.
	(XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
	(XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
	(xtensa_register_t): New field coprocessor.
	(XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
	* xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
	(xtensa_pseudo_register_read, xtensa_pseudo_register_write):
	Update to handle privileged registers.
	(xtensa_supply_gregset) Remove exccause and excvaddr registers.
	(xtensa_push_dummy_call): Set windowstart register correctly.
	(call0_analyze_prologue): Initialize xtensa_default_isa.
	(xtensa_derive_tdep): New.
	(xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
	xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
	Call xtensa_derive_tdep().
	* config/xtensa/linux.mh: New.
	* regformats/reg-xtensa.dat: New.
2008-02-11 21:58:41 +00:00
Daniel Jacobowitz
9b254dd1ce Updated copyright notices for most files. 2008-01-01 22:53:26 +00:00
Daniel Jacobowitz
30ed0a8f0b * Makefile.in (clean): Remove new files.
(powerpc-32.o, powerpc-32.c, powerpc-e500.o, powerpc-e500.c)
	(powerpc-64.o, powerpc-64.c): New rules.
	* configure.srv: Use alternate register sets for powerpc64-*-linux*
	with AltiVec, powerpc-*-linux* with AltiVec, and powerpc-*-linux*
	with SPE.
	* linux-ppc-low.c (ppc_regmap): Do not fetch the FP registers for
	SPE targets.
	(ppc_cannot_store_register): Do not check for FPSCR for SPE targets.
	(PTRACE_GETVRREGS, PTRACE_SETVRREGS, SIZEOF_VRREGS, ppc_fill_vrregset)
	(ppc_store_vrregset, PTRACE_GETEVRREGS, PTRACE_SETEVRREGS)
	(struct gdb_evrregset_t, ppc_fill_evrregset, ppc_store_evrregset): New.
	(target_regsets): Add AltiVec and SPE register sets.
	* configure.ac: Check for AltiVec and SPE.
	* linux-ppc64-low.c (PTRACE_GETVRREGS, PTRACE_SETVRREGS, SIZEOF_VRREGS)
	(ppc_fill_vrregset, ppc_store_vrregset): New.
	(target_regsets): Add AltiVec register set.
	* configure: Regenerated.

	* features/Makefile (WHICH): Add PowerPC register definitions.
	(rs6000/powerpc-32-expedite, rs6000/powerpc-e500-expedite)
	(rs6000/powerpc-64-expedite): New macros.
	($(outdir)/%.dat): Handle subdirectories.
	* regformats/rs6000/powerpc-32.dat, regformats/rs6000/powerpc-64.dat,
	regformats/rs6000/powerpc-e500.dat: New generated files.
2007-10-15 19:58:17 +00:00
Joel Brobecker
50efebf80c * config/djgpp/djconfig.sh: Switch license to GPLv3.
* copyright.sh: Likewise.
        * gdb-events.sh: Likewise.
        * gdb_gcore.sh: Likewise.
        * gdb_mbuild.sh: Likewise.
        * gdbarch.sh: Likewise.
        * observer.sh: Likewise.
        * features/feature_to_c.sh: Likewise.
        * regformats/regdat.sh: Likewise.
2007-08-23 18:19:51 +00:00
Joel Brobecker
a9762ec78a Switch the license of all .c files to GPLv3.
Switch the license of all .h files to GPLv3.
        Switch the license of all .cc files to GPLv3.
2007-08-23 18:08:50 +00:00
Ulrich Weigand
69ae91d311 * regformats/reg-spu.dat: Fix order of npc, id registers. 2007-07-24 12:51:51 +00:00
Daniel Jacobowitz
05ccab2eea Check in missed deletions. 2007-06-13 19:04:26 +00:00
Daniel Jacobowitz
117ce54362 * features/Makefile: Generate regformats for mips-linux and
mips64-linux.
	* features/sort-regs.xsl: Correct typo.
	* regformats/reg-mips.dat, regformats/reg-mips64.dat: Delete.
	* regformats/mips-linux.dat, regformats/mips64-linux.dat: New generated
	files.

	* Makefile.in (clean): Clean new files instead of deleted ones.
	(reg-mips.o, reg-mips.c, reg-mips64.o, reg-mips64.c): Delete.
	(mips-linux.o, mips-linux.c, mips64-linux.o, mips64-linux.c): New
	rules.
	* configure.srv: Specify XML files and new regformats for MIPS and
	MIPS64 GNU/Linux.
	* linux-mips-low.c (mips_num_regs): Set to only used registers.
	(mips_regmap): Do not fetch $0.  Remove unused registers.  Add
	an entry for the restart register.
	(mips_cannot_fetch_register, mips_cannot_store_register)
	(mips_reinsert_addr, mips_fill_fpregset, mips_store_fpregset): Update
	register names to match the XML descriptions.
	(mips_fill_gregset, mips_store_gregset): Likewise.  Handle the
	restart register instead of $0.
2007-06-13 18:50:38 +00:00
Daniel Jacobowitz
ff6f572f8b * arm-tdep.c (arm_scan_prologue): Do not record FPA register saves
if there are no FPA registers.
	(arm_dwarf_reg_to_regnum): New function.
	(arm_register_type, arm_register_name): Return minimal values for
	unsupported registers.
	(arm_register_sim_regno): Handle iWMMXt registers.
	(arm_gdbarch_init): Record missing FPA registers if indicated by
	a target description.  Recognize iWMMXt registers.  Only register
	"info float" for FPA.  Use ARM_NUM_REGS.  Register
	arm_dwarf_reg_to_regnum.
	* arm-tdep.h (enum gdb_regnum): Add ARM_NUM_REGS and iWMMXt
	constants.
	(struct gdbarch_tdep): Add have_fpa_registers.
	* features/xscale-iwmmxt.xml: Update capitalization.
	* regformats/arm-with-iwmmxt.dat: Regenerated.

	* src/gdb/doc/gdb.texinfo (Standard Target Features): Mention
	case insensitivity.
	(ARM Features): Describe org.gnu.gdb.xscale.iwmmxt.

	* gdb.arch/iwmmxt-regs.c, gdb.arch/iwmmxt-regs.exp: Update
	register capitalization.
2007-02-26 19:18:53 +00:00
Daniel Jacobowitz
fb1e4ffce3 * features/Makefile, features/arm-with-iwmmxt.xml,
features/gdbserver-regs.xsl, features/number-regs.xsl,
	features/sort-regs.xsl, features/xscale-iwmmxt.xml: New files.
	* regformats/arm-with-iwmmxt.dat: Generate.
	* NEWS: Mention iWMMXt.

	* gdb.arch/iwmmxt-regs.c, gdb.arch/iwmmxt-regs.exp: New.

	* Makefile.in (OBS): Add $(XML_BUILTIN).
	(XML_DIR, XML_TARGET, XML_FILES, XML_BUILTIN): New.
	(clean): Update.
	(target.xml, xml-builtin.c, stamp-xml, arm-with-iwmmxt.o)
	(arm-with-iwmmxt.c): New.
	* config.in, configure: Regenerate.
	* configure.ac: Check for iWMMXt.  Handle srv_xmltarget,
	srv_xmlbuiltin, and srv_xmlfiles.  Define USE_XML.
	* configure.srv: Mention srv_xmltarget and srv_xmlfiles.
	(arm*-*-linux*): Add iWMMXt and regset support.
	* linux-arm-low.c (PTRACE_GETWMMXREGS, PTRACE_SETWMMXREGS): Define.
	(arm_fill_gregset, arm_store_gregset, arm_fill_wmmxregset)
	(arm_store_wmmxregset, target_regsets): New.
	* server.c (get_features_xml): Take annex argument.  Check builtin
	XML documents.
	(handle_query): Handle multiple annexes.
2007-02-08 21:39:04 +00:00
Daniel Jacobowitz
6aba47ca06 Copyright updates for 2007. 2007-01-09 17:59:20 +00:00
Daniel Jacobowitz
186947f7ca gdb/gdbserver/
* Makefile.in (clean): Remove reg-mips64.c.
	(reg-mips64.c, reg-mips64.o): New rules.
	* configure.srv: Handle mips64.  Include regset support for mips.
	* linux-mips-low.c (union mips_register): New.
	(mips_get_pc, mips_set_pc, mips_reinsert_addr): Use it.
	(mips_breakpoint, mips_breakpoint_at): Use int.
	(mips_collect_register, mips_supply_register)
	(mips_collect_register_32bit, mips_supply_register_32bit)
	(mips_fill_gregset, mips_store_gregset, mips_fill_fpregset)
	(mips_store_fpregset, target_regsets): New.
	* thread-db.c (thread_db_get_tls_address): Use uintptr_t.
gdb/
	* regformats/reg-mips64.dat: New file.
2006-11-28 22:21:23 +00:00
Ulrich Weigand
a13e2c95aa ChangeLog:
* configure.tgt: Enable gdbserver for SPU target.
	* configure.ac: Build gdbserver when gdb_native is yes.
	* configure: Regenerate.
	* regformats/reg-spu.dat: New file.

gdbserver/ChangeLog:

	* configure.srv: Add target "spu*-*-*".
	* Makefile.in (clean): Remove reg-spu.c.
	(reg-spu.c, reg-spu.o, spu-low.o): Add dependencies.
	* spu-low.c: New file.
2006-11-22 17:34:15 +00:00
Daniel Jacobowitz
8695c747d8 gdb/
* Makefile.in (amd64_linux_tdep_h): New.
	(amd64-linux-nat.o, amd64-linux-tdep.o): Update.
	* amd64-linux-nat.c (amd64_linux_gregset64_reg_offset): Add
	ORIG_RAX.
	(_initialize_amd64_linux_nat): Set amd64_native_gregset64_num_regs.
	* amd64-linux-tdep.c (amd64_linux_register_name)
	(amd64_linux_register_type, amd64_linux_register_reggroup_p)
	(amd64_linux_write_pc): New.
	(amd64_linux_init_abi): Use them, and update num_regs.
	* amd64-linux-tdep.h: New file.
	* amd64-tdep.c (amd64_register_name, amd64_register_type): Make
	public.
	* amd64-tdep.h (amd64_register_name, amd64_register_type): New
	prototypes.

	* regformats/reg-x86-64-linux.dat: New file.
gdb/testsuite/
	* Makefile.in (clean): Clean reg-x86-64-linux.c.
	(reg-x86-64-linux.o, reg-x86-64-linux.c): New.
	* configure.srv (x86_64-*-linux*): Use reg-x86-64-linux.o.
	* linux-x86-64-low.c (x86_64_regmap): Include ORIG_RAX.
	(x86_64_fill_gregset, x86_64_store_gregset): Skip floating
	point registers.
2006-08-19 15:15:18 +00:00
Andreas Schwab
7fb85e4190 * regformats/reg-ia64.dat: Remove NAT registers.
gdbserver:
	* server.c (main): Allocate mem_buf with PBUFSIZ bytes.

	* linux-ia64-low.c (ia64_regmap): Remove NAT registers.
	(ia64_num_regs): Reduce to 462.
2005-10-25 11:11:08 +00:00
Daniel Jacobowitz
eee84df140 gdb/
* configure.tgt (powerpc64-*-linux*): Enable gdbserver.
	* regformats/reg-ppc64.dat: New file.
gdbserver/
	* Makefile.in (SFILES): Add linux-ppc64-low.c.
	(linux-ppc64-low.o, reg-ppc64.c, reg-ppc64.o): New targets.
	* configure.srv: Add powerpc64-*-linux*.
	* linux-ppc64-low.c: New file.
2005-05-28 22:09:04 +00:00
Kazuhiro Inaoka
86fc41d1fe 2005-04-15 Kei Sakamoto <sakamoto.kei@renesas.com>
* regformats/reg-m32r.dat: New file.
2005-04-15 00:28:03 +00:00
Orjan Friberg
ff2c3e5dc8 2005-02-01 Orjan Friberg <orjanf@axis.com>
* regformats/reg-cris.dat: New file with register definitions for CRIS.
	* regformats/reg-crisv32.dat: Ditto for CRISv32.
2005-02-01 14:24:55 +00:00
Jim Blandy
d0f54f9d42 2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy  <jimb@redhat.com>.
	* config/s390/nm-linux.h: Update comments.  Do not include "solib.h".
	(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
	(FETCH_INFERIOR_REGISTERS): Define.
	* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
	core-regset.o.
	* config/s390/s390x.mt: Remove.
	* config/s390/tm-s390.h: Remove.
	* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
	(TARGET_ELF64): Remove.
	(SKIP_TRAMPOLINE_CODE): Do not undefine.
	* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
	s390*-*-* case; always set gdb_target to s390.
	* regformats/reg-s390.dat: Remove control registers.
	* regformats/reg-s390x.dat: Likewise.
	* s390-tdep.h: New file.
	* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
	Include "inferior.h" and "s390-tdep.h".
	Remove private definition of offsetof.
	(s390_register_u_addr): Remove.
	(regmap_gregset, regmap_fpregset): Define.
	(supply_gregset, fill_gregset): Reimplement.
	(supply_fpregset, fill_fpregset): Likewise.
	(s390_inferior_tid): New function.
	(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
	(fetch_inferior_registers, store_inferior_registers): Likewise.
	* s390-tdep.c: Do not define S390_TDEP.  Include "defs.h" instead
	of <defs.h>.  Include "reggroups.h", "regset.h", and "s390-tdep.h".
	Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
	Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
	(struct gdbarch_tdep): Define.
	(struct s390_register_info): Define.
	(s390_register_info): New variable.
	(s390_register_name): Reimplement.
	(s390_register_type): New function.
	(s390_register_raw_size, s390x_register_raw_size): Remove.
	(s390_cannot_fetch_register): Remove.
	(s390_register_byte): Remove.
	(s390_register_virtual_type, s390x_register_virtual_type): Remove.
	(s390_dwarf_regmap): New variable.
	(s390_dwarf_reg_to_regnum): New function.
	(s390_stab_reg_to_regnum): Remove.
	(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
	(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
	(s390_convert_register_p): Likewise.
	(s390_register_to_value, s390_value_to_register): Likewise.
	(s390_register_reggroup_p): Likewise.
	(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
	s390_gregset, s390x_gregset, s390_fpregset): New variables.
	(s390_supply_regset, s390_regset_from_core_section): New functions.
	(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
	(S390_FPR_SIZE): Likewise.
	(S390_GPR_SIZE): Likewise.  Redefine in terms of GDB_TARGET_IS_ESAME.
	Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
	(S390_NUM_GPRS): Move here from tm-s390.h.
	(S390_NUM_FPRS): Likewise.
	(s390_in_function_epilogue_p): New function.
	(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
	Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
	(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
	Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
	Replace S390_FP_REGNUM by S390_SP_REGNUM.
	Remove calls to:
	set_gdbarch_deprecated_max_register_raw_size,
	set_gdbarch_deprecated_max_register_virtual_size,
	set_gdbarch_deprecated_register_byte,
	set_gdbarch_cannot_fetch_register,
	set_gdbarch_cannot_store_register,
	set_gdbarch_deprecated_register_size,
	set_gdbarch_deprecated_register_raw_size,
	set_gdbarch_deprecated_register_virtual_size,
	set_gdbarch_deprecated_register_virtual_type,
	set_gdbarch_deprecated_register_bytes.
	Add calls to:
	set_gdbarch_num_pseudo_regs,
	set_gdbarch_register_type,
	set_gdbarch_convert_register_p,
	set_gdbarch_register_to_value,
	set_gdbarch_value_to_register,
	set_gdbarch_register_reggroup_p,
	set_gdbarch_regset_from_core_section,
	set_gdbarch_pseudo_register_read,
	set_gdbarch_pseudo_register_write,
	set_gdbarch_in_function_epilogue_p.
	* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
	(s390_tdep_h): New variable.
2004-02-18 03:42:51 +00:00
Mark Kettenis
af23364752 * x86-64-tdep.c (amd64_register_info): Add %cs and %ss. Adjust
register numbers in comments.
* x86-64-tdep.h: Update copyright year.
(X86_64_ST0_REGNUM, X86_64_XMM0_REGNUM, X86_64_XMM1_REGNUM):
Adjust for addition of %cs and %ss.
* amd64fbsd-nat.c: Update copyright year.
(reg_offset): Add register offsets for %cs and %ss.
* amd64fbsd-tdep.c: Update copyright year.
(amd64fbsd_r_reg_offset): Add register offsets for %cs and %ss.
(amd64fbsd_sc_reg_offset): Likewise.
* x86-64-linux-nat.c: Update copyright year.
(x86_64_linux_gregset64_reg_offset): Add register offsets for %cs
and %ss.
* amd64nbsd-nat.c: Update copyright year.
(amd64nbsd32_r_reg_offset): Add register offsets for %cs and %ss.
* amd64nbsd-tdep.c: Update copyright year.
(amd64nbsd_r_reg_offset): Add register offsets for %cs and %ss.
* x86-64-linux-tdep.c: Update copyright year.
(user_to_gdb_regmap): Add mapping for %cs and %ss.
(x86_64_linux_sc_reg_offset): Adjust for addition of %cs and %ss.
* regformats/reg-x86-64.dat: Add %cs and %ss.
2004-01-10 12:52:41 +00:00
Daniel Jacobowitz
f436a26abf * regformats/reg-m68k.dat: Remove fpcode and fpflags. 2003-01-04 21:55:54 +00:00
Daniel Jacobowitz
bc1e36cac4 2002-04-11 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-low.c (usr_store_inferior_registers): Support
        registers which are allowed to fail to store.
        * gdbserver/linux-low.h (linux_target_ops): Likewise.
        * gdbserver/linux-ppc-low.c (ppc_regmap): Support FPSCR.
        (ppc_cannot_store_register): FPSCR may not be storable.
        * regformats/reg-ppc.dat: Support FPSCR.
2002-04-11 20:30:08 +00:00
Michal Ludvig
de220d0ff6 * x86-64-tdep.h (X86_64_NUM_REGS, X86_64_NUM_GREGS): Delete #defines.
(x86_64_num_regs, x86_64_num_gregs): Added extern variables.
	* x86-64-linux-nat.c (x86_64_regmap): Swapped RBX <> RDX, added DS, ES, FS, GS.
	(x86_64_linux_dr_get_status, supply_gregset),
	(fill_gregset): Changed X86_64_NUM_GREGS to x86_64_num_gregs.
	* x86-64-tdep.c (x86_64_register_raw_size_table): Delete.
	(x86_64_register_info_table): Add.
	(X86_64_NUM_REGS, X86_64_NUM_GREGS): Add.
	(x86_64_register_raw_size, x86_64_register_virtual_type),
	(x86_64_register_name, _initialize_x86_64_tdep): Changed to reflect new
	general x86_64_register_info_table.
	(i386_gdbarch_init): gdbarch_register_bytes is now set
	dynamicaly during initialization.
	* regformats/reg-x86-64.dat: Synced with changes to registers above.
	* gdbserver/linux-x86-64-low.c: Ditto.
2002-03-27 10:21:29 +00:00
Daniel Jacobowitz
265f716b73 2002-02-27 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-s390-low.c: New file.
        * regformats/reg-s390.dat: New file.
        * regformats/reg-s390x.dat: New file.
        * gdbserver/configure.srv: Add S/390.
        * gdbserver/Makefile.in: Add S/390.
        * configure.tgt: Enable gdbserver for S/390.
2002-02-28 16:58:15 +00:00
Daniel Jacobowitz
58caa3dcdb 2002-02-27 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/acconfig.h: New file.
        * gdbserver/i387-fp.c: New file.
        * gdbserver/i387-fp.h: New file.
        * gdbserver/linux-x86-64.c: New file.
        * regformats/reg-x86-64.dat: New file.
        * configure.tgt: Add x86_64-*-linux* gdbserver support.
        & gdbserver/configure.srv: Add x86_64-*-linux* and regset support.
        * gdbserver/configure.in: Add support for regsets.
        * gdbserver/config.in: Regenerate.
        * gdbserver/configure: Regenerate.
        * gdbserver/Makefile.in: Likewise.  Add $(linux_low_h).
        * gdbserver/linux-low.h: New file.
        * gdbserver/linux-low.c: Include "linux-low.h".  Add support
        for regsets.
        * gdbserver/linux-arm-low.c: Include "linux-low.h".
        * gdbserver/linux-ia64-low.c: Include "linux-low.h".
        * gdbserver/linux-m68k-low.c: Include "linux-low.h".
        * gdbserver/linux-mips-low.c: Include "linux-low.h".
        * gdbserver/linux-ppc-low.c: Include "linux-low.h".
        * gdbserver/linux-sh-low.c: Include "linux-low.h".
        * gdbserver/linux-i386-low.c: Include "linux-low.h".  Include
        "i387-fp.h".  Add PTRACE_GETREGS and friends.
        * gdbserver/regcache.c (supply_register): New function.
        (supply_register_by_name): New function.
        (collect_register): New function.
        (collect_register_by_name): New function.
2002-02-27 07:07:49 +00:00
Daniel Jacobowitz
a02e4a61b2 2002-02-27 Daniel Jacobowitz <drow@mvista.com>
* regformats/reg-i386-linux.dat: New file, with $orig_eax.
        * gdbserver/Makefile.in: Add rules for reg-i386-linux.o.
        * gdbserver/configure.srv: Change i386-*-linux* to use
        reg-i386-linux.o.
2002-02-27 06:18:09 +00:00
Daniel Jacobowitz
0a30fbc4cf 2002-02-14 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/Makefile.in: Add regformats directory to INCLUDE_CFLAGS,
        and remove unused $(INCLUDE_DIR).
        Add regcache.c to OBS.
        Add generated register protocol files to clean target.
        Update dependencies for new objects, obsolete old target code.

        * gdbserver/linux-low.c: Remove all platform-specific code to
        new files.  Remove various dead code.  Update to use regcache
        functionality.
        * gdbserver/remote-utils.c (fromhex): Add return statement
        to quiet warning.
        (putpkt): Dynamically allocate buf2 because PBUFSIZ is no longer
        constant.
        (input_interrupt): Add integer parameter to match prototype
        of a signal handler.
        (outreg): Use register_data ().
        (prepare_resume_reply): Use gdbserver_expedite_regs.
        * gdbserver/server.c (main): Dynamically allocate own_buf because
        PBUFSIZ is no longer constant.  Use registers_to_string () and
        registers_from_string ().
        * gdbserver/server.h: No longer include "defs.h".  Add prototypes
        for error (), fatal (), and warning ().  Update definition of
        PBUFSIZ to use regcache functionality.  Add include guard.
        * gdbserver/utils.c (fatal): Add missing ``const''.
        (warning): New function.

        * regformats/regdat.sh: Include "regcache.h" in generated files.
        Provide init_registers () function.
        * regformats/regdef.h: Add prototype for set_register_cache ().
        Add include guard.

        * gdbserver/linux-arm-low.c: New file.
        * gdbserver/linux-i386-low.c: New file.
        * gdbserver/linux-ia64-low.c: New file.
        * gdbserver/linux-m68k-low.c: New file.
        * gdbserver/linux-mips-low.c: New file.
        * gdbserver/linux-ppc-low.c: New file.
        * gdbserver/linux-sh-low.c: New file.

        * gdbserver/regcache.c: New file.
        * gdbserver/regcache.h: New file.

        * gdbserver/low-linux.c: Removed obsolete file.
2002-02-14 06:21:24 +00:00
Daniel Jacobowitz
c638789ff8 2002-02-04 Daniel Jacobowitz <drow@mvista.com>
* regformats/regdat.sh: Add braces to the definition of
        expedite_regs_${arch}.
2002-02-04 22:45:49 +00:00
Daniel Jacobowitz
db2530270b 2002-02-04 Daniel Jacobowitz <drow@mvista.com>
* regformats/regdef.h (struct reg): Add comment describing the
        requirements for offset and size fields.
2002-02-04 22:41:36 +00:00
Daniel Jacobowitz
3cf384d4ea 2002-02-01 Daniel Jacobowitz <drow@mvista.com>
* regformats/reg-arm.dat: New file.
        * regformats/reg-i386.dat: New file.
        * regformats/reg-ia64.dat: New file.
        * regformats/reg-m68k.dat: New file.
        * regformats/reg-mips.dat: New file.
        * regformats/reg-ppc.dat: New file.
        * regformats/reg-sh.dat: New file.
        * regformats/regdef.h: New file.
        * regformats/regdat.sh: New file.
2002-02-01 22:05:28 +00:00