* dbxread.c (read_dbx_symtab end_psymtab), partial-stab.h: Don't
use partial_symtab->textlow==0 as a flag, as 0 is a legitimate
text address. Use a seperate flag (textlow_not_set) instead.
This makes stabs in ELF .o files work a lot better.
* mdebugread.c xcoffread.c: Define textlow_not_set for
partial-stab.h.
* stabsread.h (end_psymtab): Add textlow_not_set arg to prototype.
and MMALLOC_CHECK macros, and add comment indicating how host dependent
makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
to use it but to not do heap corruption checking.
* gdbserver/Makefile.in: Ditto.
* utils.c (init_malloc): Replace warning() use with direct call of
fprintf_unfiltered, since current_target has not yet been set and thus
we cannot use warning(). If we try to use mmcheck and it fails,
suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
defined. Other small mmalloc related cleanups.
* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
Remove obsolete defines.
* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
* config/rs6000/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix.mh (MMALLOC_DISABLE):
* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
* config/mips/mipsm3.mh (MMALLOC_DISABLE):
* config/mips/decstation.mh (MMALLOC_DISABLE):
* config/m88k/cxux.mh (MMALLOC_DISABLE):
* config/i386/i386mk.mh (MMALLOC_DISABLE):
* config/i386/i386m3.mh (MMALLOC_DISABLE):
* config/i386/i386gnu.mh (MMALLOC_DISABLE):
Use MMALLOC_CFLAGS instead.
infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c,
win32-nat.c, config/nm-lynx.h: Rename thread.h to gdbthread.h to
avoid conflict with Solaris /usr/include/thread.h.
* config/rs6000/rs6000.mh (NATDEPFILES): Move xcoffread.o ...
* config/rs6000/rs6000.mt (TDEPFILES): ... to here
* xcoffsolib.c (xcoff_relocate_symtab_hook): Define and initialize.
(solib_info): Call xcoff_relocate_symtab via the hook.
(sharedlibrary_command): Ditto.
* xcoffread.c: Remove all FAKING_RS6000 comments and defines.
(xcoff_add_toc_to_loadinfo_hook): Define and initialize here.
(xcoff_init_loadinfo_hook): Define and initialize here.
(scan_xcoff_symtab): Call xcoff_add_toc_to_loadinfo via the hook.
(xcoff_initial_scan): Call xcoff_init_loadinfo via the hook.
* xcoffsolib.h (xcoff_relocate_symtab_hook): Declare extern func.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add initializations
of xcoff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook.
* rs6000-nat.c (_initialize_core_rs6000): Add initialization
of xcoff_relocate_symtab_hook.
so that anything that wants an allocation function not yet pulled
in, will get it from mmalloc rather than a system library.
* Makefile.in (INSTALLED_LIBS): Reorder to match order of CLIBS,
to avoid surprising results when used.
* configure.in (AC_CHECK_HEADERS): check for endian.h.
Use AC_CHECK_TOOL to find AR & RANLIB. Add AC_PROG_AWK.
Add host & target cases for i[345]86-*-gnu*.
* config.in: Regenerate with autoheader.
* configure: Regenerate with autoconf.
* Makefile.in (AR, AWK): Set from corresponding autoconf substs.
(init.c): Don't scan mig-generated files.
* defs.h (endian.h): Include if HAVE_ENDIAN_H defined.
* config/nm-m3.h (ATTACH_NO_WAIT): Define.
* infcmd.c (attach_command): Use "#ifndef ATTACH_NO_WAIT"
rather than "#ifndef MACH".
dependencies.
* scm-lang.c (gdb_string.h): Include.
* objfiles.c (add_to_objfile_sections): Cast second arg of obstack_grow
call to correct type (char *).
* cp-valprint.c (cp_print_static_field): Ditto.
* somsolib.c (som_solib_create_inferior_hook): Add a declaration
for external find_unwind_entry function (from hppa-tdep.c).
* remote-pa.c (remote_write_bytes, remote_read_bytes): Change
type of second arg to "char *" to be type compatible with
dcache.
(remote_wait): Cast second arg to strtol to correct type.
* hppa-tdep.c (compare_unwind_entries): Change argument types to
"const void *" to be type compatible with qsort, and then
assign to local args prior to use.
before testing against reg_ptr.
* eval.c (evaluate_subexp_standard): Cast type of
TYPE_FN_FIELD_VOFFSET to int.
* findvar.c (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer): Cast type of sizeof to int.
* values.c (unpack_field_as_long, modify_field): Ditto.
* valops.c (value_assign, call_function_by_hand): Ditto.
* infcmd.c (do_registers_info): Ditto.
* ser-tcp.c (tcp_open): Ditto
* remote.c (putpkt): Ditto.
* dcache.c (dcache_peek): Ditto.
* dcache.c (dcache_poke): Ditto.
* m2-exp.y (yylex): Ditto.
* gnu-regex.c (re_match_2): Ditto.
* f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef
out unused macro definition and variables.
* inftarg.c (proc_wait): Move from main.c to here, and make static.
* valprint.c (val_print_string): Change bufsize from int to unsigned.
* main.c (wait.h): Include
* top.c (command_line_input): Remove unused variable "c".
* f-typeprint.c (f_type_print_varspec_prefix): Add missing enum
value TYPE_CODE_TYPEDEF to switch statement.
(f_type_print_varspec_suffix): Add missing enum value
TYPE_CODE_TYPEDEF to switch statement.
* ch-exp.c (parse_primval): Add remaining enumeration values to
switch statement, with no specific action.
(ch_lex): Add LOC_UNRESOLVED in switch statement.
(pushback_token): Ifdef out, since code using it is ifdef'd out.
* stabsread.c (cleanup_undefined_types): Remove unused label
"badtype".
* objfiles.h (print_symbol_bcache_statistics): Add prototype.
* maint.c (objfiles.h): Include.
(maintenance_print_statistics): Remove unused variable "temp".
* minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove
unused variable "found_file_symbol".
* m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch.
* language.c (lang_bool_type): Use existing function local type
variable rather than create block local variables.
* solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS.
* infptrace.c (wait.h, command.h): Include.
* ser-tcp.c (gdb_string.h): Include
* i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR.
(i386_get_frame_setup): Change "pc" from int to CORE_ADDR.
* command.c (complete_on_enum): Make assignment used as truth value
explictly check against NULL.
(wait.h): Include.
* infrun.c (wait_for_inferior): Ifdef out prologue_pc since code
that uses it is ifdef'd out.
* parser-defs.h: Add prototype for write_dollar_variable.
* infrun.c: Add prototype for write_pc_pid.
* breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs.
* symmisc.c (bcache.h): Include.
* bcache.h: Add prototype for print_bcache_statistics.
* symfile.c: Include <time.h>.
* printcmd.c (print_scalar_formatted): Change len to unsigned int.
* valarith.c (value_equal): Cast result of TYPE_LENGTH to int.
* valarith.c (value_binop): Change result_len, promoted_len1,
and promoted_len2 to unsigned int.
* valarith.c (value_subscripted_rvalue): Change elt_offs and
elt_size to unsigned int.
* valops.c (value_array): Change typelength to unsigned int.
(destructor_name_p): Change len to unsigned int.
* scm-lang.h (scm_parse): Add prototype for scm_unpack.
* symfile.c (decrement_reading_symtab): Change return type to void.
* valarith.c (value_subscript): Remove unused variable "word".
(value_subscript): Remove unused variable "tint".
* valops.c (auto_abandon): Ifdef out, since code using it is also
ifdef'd out.
* eval.c (init_array_element): Remove unused variable "val".
* Makefile.in (values.o): Depends on scm-lang.h.
(command.o): Depends upon wait_h.
(ser-tcp.o): Depends upon gdb_string.h.
(infptrace.o): Depends upon wait_h and command_h.
(maint.o): Depends on objfiles.h and symfile.h.
* values.c (allocate_repeat_value): Remove unused variable
"element_type".
(scm-lang.h): Include.
* breakpoint.c (create_longjmp_breakpoint): Enclose in
GET_LONGJMP_TARGET define, unused otherwise.
* config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint,
i386_remove_watchpoint and i386_stopped_by_watchpoint.
* configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
Change CONFIG_HEADERS test in AC_OUTPUT accordingly.
* configure: Rebuild.
* Makefile.in (stamp-h): Depend upon config.in, not config.h.in.
Set CONFIG_HEADERS to config.h:config.in.
The file name config.h.in can be used on DOS filesystems.
* config.h.in: New file.
* Makefile.in (distclean): Remove config.h and stamp-h during distclean.
(config.h, stamp-h): New targets to remake config.h when necessary.
* configure.in (AC_CONFIG_HEADER): Add, generate config.h.
* configure: Regenerate.
* Makefile.in (defs_h): Add config.h
* defs.h (config.h): Include before any other includes or defines.
* i386-tdep.c (gdb_string.h): Move include after include of defs.h.
* Makefile.in (SFILES): Add bcache.c.
(symtab_h): Add bcache.h.
(HFILES_NO_SRCDIR): add bcache.h
(COMMON_OBJS): Add bcache.o
(bcache.o): New target.
* dbxread.c (start_psymtab): Make global_syms & static_syms
type "partial_symbol **".
* hpread.c (hpread_start_symtab): Ditto.
* os9kread.c (os9k_start_psymtab): Ditto.
* stabsread.h (start_psymtab): Ditto.
* {symfile.c, symfile.h} (start_psymtab_common): Ditto.
* maint.c (maintenance_print_statistics): Call
print_symbol_bcache_statistics.
* objfiles.c (allocate_objfile): Initialize psymbol bcache malloc
and free pointers.
* solib.c (allocate_rt_common_objfile): Ditto.
* symfile.c (reread_symbols): Ditto.
(free_objfile): Free psymbol bcache when objfile is freed.
(objfile_relocate): Use new indirect psymbol pointers.
* objfiles.h (struct objfile): Add psymbol cache.
* symfile.c (compare_psymbols): Now passed pointers to pointers to
psymbols.
(reread_symbols): Free psymbol bcache when freeing other objfile
resources.
(add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new
psymbol using the psymbol bcache.
(init_psymbol_list): Psymbol lists now contain pointers rather than
the actual psymbols.
* symfile.h (psymbol_allocation_list): Psymbol lists now dynamically
grown arrays of pointers.
(ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol
bcache.
* symmisc.c (print_partial_symbols): Now takes pointer to pointer
to partial symbol.
(print_symbol_bcache_statistics): New function to print per objfile
bcache statistics.
(print_partial_symbol, print_partial_symbols,
maintenance_check_symtabs, extend_psymbol_list):
Account for change to pointer to pointer to partial symbol.
* symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2,
make_symbol_completion_list):
Account for change to pointer to pointer to partial symbol.
* symtab.h (bcache.h): Include.
* xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms
type "partial_symbol **".
collision in C++.
* infcmd.c (path_command): Use empty string if PATH name not set.
* i386-tdep.c (skip_trampoline_code): New function.
* srec.c: Renamed dsrec.c to avoid filename collision.
* Makefile.in: Cope with renaming.
Update copyrights to 1996.
* ch-exp.c: New file. Use recursive-descent.
Recognize labelled array tuples and powerset ranges.
* Makefile.in: Update for no longer using yacc for ch-exp.
* c-lang.c: Make various functions non-static.
* c-lang.h: Add bunches of prototypes.
* cp-valprint.c (cp_print_value_fields): Also take address.
(cp_print_value): Likewise. Use baselcass_offset.
* stabsread.c (current_symbol): New static variable.
(type_synonym_name): Remove.
(read_type): If copying, make copy be a TYPE_CODE_TYPEDEF.
(read_array_type): Don't need to handle undefined element type here.
(cleanup_undefined_types): Ditto.
(read_range_type): Look for Chill ranges.
* valops.c (value_assign): Fix case lval_internalvar - don't try
to assign into old value (which might be too small!).
(value_coerce_array): No longer need special VALUE_REPEATED handling.
(value_arg_coerce): Cleaner array->pointer decay mechanism.
(search_struct_field): Use baseclass_offset rather than
baseclass_addr.
(value_slice): Use get_discrete_bounds.
* value.h (COERCE_VARYING_ARRAY): Take type argumnt as well.
* values.c (baseclass_offset): Change parameter interface.
(baseclass_addr): Removed.
* c-typeprint.c, c-valprint.c, ch-valprint.c, values.c, valops.c:
Add check_typedef/CHECK_TYPEDEF as needed.
(CC_FOR_TARGET, CXX_FOR_TARGET): Use it to find target libraries.
* configure.in (X_CFLAGS): Fix typo.
(target_subdir): Set to "${target_alias}/" if cross.
* configure.in: Regenerated.
* fork-child.c (fork_inferior): Add call to
TARGET_CREATE_INFERIOR_HOOK to allow target specific code to get
control just before the new process executes it's first instruction.
* remote-mips.c (mips_initialize): Cleanup a bit. Don't try to
receive a packet at first. This speeds up initialization a lot.
Use TARGET_MONITOR_PROMPT instead of "<IDT>".
(common_breakpoint): Use rresponse instead of rerrflg to inspect
error code.
* symfile.c (syms_from_objfile reread_symbols): Call
TARGET_SYMFILE_POSTREAD to allow target specific code to get
control after reading new symbols.
* target.h: New macros TARGET_SYMFILE_POSTREAD, and
TARGET_CREATE_INFERIOR_HOOK. See above for descriptions.
* config/mips/{irix5.mh nm-irix5.h}: Delete nm-irix5.h. Make
NAT_FILE point directly at ../nm-sysv4.h.
* config/mips/{mipsm3.mh nm-m3.h}: Delete nm-m3.h. Make
NAT_FILE point directly at ../nm-m3.h.
* config/mips/{mipsv4.mh nm-sysv4.h}: Delete nm-sysv4.h. Make
NAT_FILE point directly at ../nm-sysv4.h.
* config/mips/nm-mips.h: Improve comment at top of file.
* config/mips/tm-mips.h (TARGET_MONITOR_PROMPT): Change
definition into a proper string.
start-sanitize-gm
* configure configure.in: Add support for --enable-gm.
(mips*-*-magic*): Change target from magic to idt.
* eval.c expprint.c expression.h parse.c remote-mips.c utils.c:
Change GENERAL_MAGIC_HACKS to GENERAL_MAGIC.
* magic.c magic.h: Update files from GM.
* config/mips/magic.mt: Delete. No longer necessary now that we
use --enable mechanism.
* config/mips/tm-idt.h: Add GM stuff needed for remote GM box.
* config/mips/tm-irix5.h: Add GM stuff needed for native Irix box.
* config/mips/tm-magic.h: Move up to config/tm-magic.h. Move all
platform specific stuff into tm-irix.h and tm-idt.h. Add defs for
TARGET_SYMFILE_POSTREAD and TARGET_CREATE_INFERIOR_HOOK.
end-sanitize-gm
* regex.c: Renamed to gnu-regex.c.
* Makefile.in (POSSLIBS): Refer to gnu-regex.h and gnu-regex.c.
(REGEX, REGEX1): Change to gnu-regex.o instead of regex.o.
(regex.o): Renamed to gnu-regex.o; refer to gnu-regex.c.
(irix5-nat.o, osfsolib.o, gnu-regex.o, solib.o, source.o, symtab.o):
Likewise.
* irix5-nat.c, osfsolib.c, gnu-regex.c, solib.c, source.c, symtab.c):
Include "gnu-regex.h" instead of "regex.h".
* alpha-tdep.c (in_prologue): Rename to alpha_in_prologue, to
avoid conflicts with symtab.h.
fixes building gdb under OSF/1 4.0
* config/pa/hppahpux.mh: Remove hardcoding of X locations.
* Makefile.in: Use X11_CFLAGS, X11_LDFLAGS and X11_LIBS.
* configure.in: Link X statically on Solaris, SunOS and HPUX.
sh3 monitor support.
* monitor.c: Cleanup regexp compilation stuff to make it easier
to use several regexps.
* monitor.h: Get rid of struct rom_cmd_data. It's no longer used.
* config/m68k/tm-monitor.h: Don't redefine NUM_REGS here. It just
causes GDB to crash.
* expprint.c (print_subexp): Add OP_NAME support.
* parse.c (length_of_subexp, prefixify_subexp): Likewise.
* scm-lang.c (scm_unpack, in_eval_c, scm_lookup_name): new function.
* scm-lang.h: Declare builtin_type_scm; other minor tweaks.
* values.c (unpack_long): If type is SCM, call scm_unpack.
* scm-valprint.c (scm_val_print): Use extract_signed_integer,
instead unpack_long
* scm-lang.c: More Scheme expression parsing from here ...
* scm-exp.c: ... to here. New file.
Also, provide for gdb to evaluate simple constants and names..
* Makefile.in: Note new scm-exp.{c,o}.
* scm-valprint.c: ... this new file.
Also major improvements in support for printing SCM values.
* scm-lang.h: New file.
* scm-tags.h: New file.
* Makefile.in: Note new scm-valprint.{c,o}.
* callback.[ch]: New files.
* remote-rdp.c: Support for the ARM RDP monitor.
* Makefile: Update.
* arm-tdep.c (arm_othernames): New.
(_initialize_arm_tdep): install 'othernames' command.
(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
* configure.in: Check for termios.h, termio.h and sgtty.h.
(i[345]86-*-win32*): New host.
* configure: Regenerated.
* inflow.c: Clean up inclusions.
* main.c (main): Check for WINGDB, not WIN32.
* printcmd.c (do_examine): Put QUIT test in loop.
* remote-hms.c (e7000_load): Delete.
(hms_ops): Point to generic_load instead.
* remote-hms.c (hms_ops): Point to generic_load.
* remote-sim.c (sim_callback_write_stdout): Becomes
gdbsim_write_stdout.
(gdbsim_load): Call generic_load.
* remote-utils.c (gr_load_image): Delete.
* ser-unix.c (terminal.h): Include instead of havig
own #if tree.
(hardwire_flush_input): Reset input buffer too.
* source.c (openp): If WIN32 then open file in binary mode.
* terminal.h: Configure IO mechanism using autoconf defines if available and
not overriden.
* utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check.
* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o
* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE.
(ADDR_BITS_REMOVE): New.
(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
(INST_xx): New
(FRAME_FIND_SAVED_REGS): Pass the right argument.
(arm_get_next_pc): Declare.
* mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
out by autoconf.
* config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
* Makefile.in, configure.in: Converted to use autoconf
* aclocal.m4: New file, local autoconf macro definitions.
* configure: New file, generated with autoconf 2.3.
Sun make (with VPATH) work...
* monitor.c monitor.h rom68k-rom.c: Serious cleanup to make IDP
(rom68k) target work right.
* array-rom.c op50-rom.c w89k-rom.c: Partial updates to new
monitor.c interface. More work needs to be done here.
* config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to
match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no
floating-point for this card.
and config/a29k/vx29k.mt.
* configure.in: add new configuration a29k-*-vxworks.
* remote-vx29k.c: new file merged from WRS.
* remote-vx.c: merge changes from WRS.
Add procfs support for Alpha OSF/1-2.x.
* config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic
OSF/1 native support.
* config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly.
(MUNCH_DEFINE): Removed.
* config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files
for procfs support.
* configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1
release 2.x and higher, else alpha-osf1.mh, as the procfs support
in release 1.x is incomplete.
* Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh.
* alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset,
fill_fpgregset): New routines for procfs support.
* inftarg.c (_initialize_inftarg): Don't add ptrace support
if we have an optional procfs and /proc is accessible.
* procfs.c: Include sys/fault.h and sys/syscall.h before
including sys/procfs.h.
(unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL
is defined, additionally perform a PIOCSSIG to really terminate
the inferior.
(create_procinfo): Always return a result.
(create_procinfo, do_attach): Don't trace T_IFAULT faults if
PROCFS_DONT_TRACE_IFAULT is defined.
(procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as
argument to startup_inferior if it is defined.
(proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead
of tracing exits from exec system calls. Needed for the user level
loader under Alpha OSF/1.
(do_detach): Clear any pending signal if we want to detach from
a process without a signal.
(set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined,
don't issue a PIOCSSIG if pr_cursig already contains the signal we
intend to set.
(info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the
pending signals are numbered from 1 instead of 0.
(info_proc_mappings): Increase size of output format for addresses
if BFD_HOST_64_BIT is defined.
(procfs_stop): Renamed from child_stop.
(_initialize_procfs): Don't add procfs support if we have an
optional procfs and /proc is not accessible.
* core.c (dis_asm_read_memory): Add call to
dis_asm_read_memory_hook to provide alternate way for disassembler
to read memory.
* defs.h: Protect from multiple inclusion. Add decl for
dis_asm_read_memory_hook.
* gdbtk.c (finish_saving_output): Don't do anything if not saving
output.
* (breakpoint_notify): Don't send null filename to tcl.
* (gdb_eval): New tcl command to eval an expression.
* (gdb_disassemble): New tcl command to do disassembly. This
allows tcl code to choose between exec file and target memeory,
and can also do mixed source and assembly.
* (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure
that more of the environment is set up. Also, create link between
gdb and tcl vars disassemble{-_}from{-_}exec.
* gdbtk.tcl: New expression window support.
* Make assembly window be 80 columns wide.
* Use new disassembly method. Add menu items to select
disassembly from exec file or target.
* Change View menubar item to Options.
* Get rid of Stack, Breakpoints, Signals, and Variables Windows,
since they don't exist yet.
* Pop up a copyright window on startup.
* top.c: Make window startup be the default.
* Add dis_asm_read_memory_hook.
i386aix-nat.o, i386m3-nat.o, irix5-nat.o, lynx-nat.o, m3-nat.o,
mipsm3-nat.o, ns32km3-nat.o, remote-e7000.o, remote-os9k.o):
Add dependencies.
(copying.o, os9kread.o, remote.o): Update dependencies.
* valarith.c (value_sub): When subtracting pointers, only
check for a match of the pointed to element lengths.
Cast element length to LONGEST to obtain a signed result for
pointer subtractions.
available.
* configure.in (ENABLE_CLIBS): Use $(TCL) and $(TK) instead of
-ltcl and -ltk.
* gdbtk.c: Get rid of lots of unnecessary #includes.
* (gdbtk_init): Use ConnectionNumber macro instead of referencing
Display structure directly.
* gdbtk.tcl: Change exit button to quit button (makes shebs
happy).
* Makefile.in: Remove xcoffexec.o rule.
* exec.c (exec_file_command): Add comment.
Fix data and bss relocation for VxWorks 5.1:
* remote-vx.c (vx_add_symbols): New function.
(vx_load_command, add_symbol_stub): Call it instead of
symbol_file_add.
(vx_wait): Remove comment which was wrong to useless.
* remote-vx.c: Reindent much of file.
* coffread.c (cs_to_section, find_targ_sec): New functions.
(process_coff_symbol): Set SYMBOL_SECTION to result
from cs_to_section.
(coff_symtab_read): Call cs_to_section and deal appropriate
rather than assuming sections are in a certain order. Deal with
BSS.
* coffread.c: Remove text_bfd_scnum variable.
(hpread.o): Add dependencies.
* somread.c: Do not include "aout/aout64.h". SOM has nothing to
do with a.out.
(BYTES_IN_WORD): Delete.
(som_symfile_read): Call hpread_build_psymtabs to build any
minimal symbols based on the HP C native debug symbols.
(som_symfile_finish): Call hpread_symfile_finish.
(som_symfile_init): Call hpread_symfile_init.
* config/pa/tm-hppa.h (HPREAD_ADJUST_STACK_ADDRESS): Define.
* hppa-tdep.c (hpread_adjust_stack_address): New function.
* config/pa/hppabsd.mh (NATDEPFILES): Add hpread.o
* config/pa/hppahpux.mh (NATDEPFILES): Likewise.
* hpread.c: New file.
NLMCONV_FOR_TARGET. (SUBDIRS): Add nlm target.
* configure.in (powerpc-*-netware*): Automatically configure nlm
subdir.
* nlm/Makefile.in: Add {CC NLMCONV LD}_FOR_TARGET. Remove alpha
specific stuff. Make things more configurable.
* nlm/configure.in: Add powerpc-*-netware* target. Use
gdbserve.mt/cpu.c/cpu.h for target stuff. Get rid of tm/xm/nm.h
files.
* nlm/gdbserve.c: Move Alpha specific stuff into other files.
Remove lots of architecture-specific stuff.
* nlm/gdbserve.def: Add new imports.
* nlm/ppc.c, nlm/ppc.h: New files that contain PowerPC specific code.
* nlm/prelude.c: Don't include libhooks.h, get rid of call to
register library.
* nlm/prelude.o: What was this doing here?
Remove; unused.
(TAGFILES_NO_SRCDIR): Remove ALLPARAM.
(HFILES_NO_SRCDIR): Remove all files in config sub-directory.
(TAGS): Also pass result of find on config sub-directory to etags.
(ALLPARAM): Remove; now unused.
--enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
where appropriate.
* General hackery to support alternate user-interface.
* breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
disable_breakpoint): Call hooks for alternate user-interface.
* defs.h: Add declarations for alternate user-interface hooks.
* main.c (main): Add --nw (and --nowindows) options to disable
the GUI.
* (near call to command_loop): Call command_loop_hook if set.
* (fputs_unfiltered): Call fputs_unfiltered_hook if set.
* stack.c: Call print_frame_info_listing_hook if set.
* top.c (gdb_init): Initialize targets.c and utils.c prior to
other files to make sure that calls to error and warning will
work. Call init_ui_hook after everything else.
* utils.c (query): Call query_hook if set.
* (gdb_flush): Call flush_hook if set.
* Change _initialize_utils to initialize_utils cuz we don't use
automatic initialization of utils.c anymore.
* Support for TK GUI.
* Makefile.in: Add rule for gdbtk.o.
* configure.in: Add support for --enable-gdbtk.
* gdbtk.c: New file. Contains support routines for TK interface.
* gdbtk.tcl: New file. Implements GUI policy.
* remote.c: Get rid of #ifdef DONT_USE_REMOTE. It's no longer
necessary.
(diststuff): Add for new distribution support.
(gdb.tar.Z, make-proto-gdb.dir, setup-to-dist,
gdb-$(VERSION).tar.Z, make-proto-gdb-1, make-proto-testsuite.dir):
Remove old distribution building rules, now uses standard
distribution support in parent directory Makefile.in.
* Add rule for annotate.o to keep Sun make happy.
* configure.in: Add config for powerpc/Netware.
* partial-stab.h (near N_SO): Don't call START_PSYMTAB with null
filename. This speeds up handling of trailing N_SO stabs (they
mark the end of a .o file).
* target.c, target.h: Change the way pushing and popping of
targets work to support target overlays and inheritance.
* corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c:
Fixup references to current_target, due to previous changes.
* config/i386/tm-i386nw.h: Enable longjmp support. More work is
needed to get the address of longjmp out of the target.
(i[34]86-*-mach3*, i[34]86-*-osf1mk*, mips-*-mach3*,
m88*-*-mach3*, ns32k-*-mach3*): Recognize.
* Makefile.in (gdb-stop): New target.
* gdb-stop.c: New file, utility to gets attention of waiting GDBs
in Mach 3.
to new file top.c. Make things extern instead of static and
similar rearrangements to deal with this.
* top.h: New file.
* utils.c: Move fputs_unfiltered to main.c. Remove
FPUTS_UNFILTERED_OVERRIDE ifndef.
* Makefile.in: Change so that gdb uses main.c, utils.c, and top.c,
and libgdb uses utils.c and top.c.
(child_mourn_inferior): Call proc_remove_foreign.
* main.c (gdb_init): Call init_proc.
* main.c: Provide dummy versions of init_proc, proc_wait, and
proc_remove_foreign for the gdb case (the libgdb case provides its
own versions of these functions).
* Makefile.in (libgdb-files): Add libproc.a.
cyscm links against ../../gdb/{...}.o
Added a new target: libgdb-files. It creates a file of that name
containing a list of files for libgdb. If the variable LIBGDBPREFIX
is set, each file name has that prepended.
BROKEN_LARGE_ALLOCA. Do the cleanup before returning, rather than
leaving it on the chain. Reindent much of this function.
* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
config/ns32k/xm-ns32km3.h: Remove all references to
BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
* main.c, fork-child.c, many config files: Remove all
SET_STACK_LIMIT_HUGE code; with the above changes it should no
longer be needed.
* symtab.c (lookup_partial_symbol): Use if and abort, not assert.
This avoids __eprintf troubles.
* main.c (main): Surround in #ifndef MAIN_OVERRIDE. Move
initialization code which needs to be called even if we bypass the
command line stuff into gdb_init.
* utils.c (fputs_unfiltered): Surround in #ifndef
FPUTS_UNFILTERED_OVERRIDE.
* Makefile.in (libgdb.a): New target.
* utils.c: Rearrange I/O stuff a bit so that all output goes
through fputs_unfiltered. Use vasprintf; removes arbitrary limit
which made %s not work with arbitrarily large strings.
* printcmd.c (printf_command): Use printf_filtered, not
printf_unfiltered and printf, now that arbitrary limit is gone.
find, to locate TM_FILE, XM_FILE, and NAT_FILE. This is faster
and means that these filenames no longer need be unique across all
the config/* directories.
* configure.in: Put the config/*/ into TM_FILE, etc.
* m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
and trapv exceptions.
* target.h (struct section_table), objfiles.h (struct obj_section):
Change name of field sec_ptr to the_bfd_section. More mnemonic
and avoids the (sort of, for the ptx compiler) name clash with
the name of the typedef.
* exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.
* utils.c: Include readline.h.
* Makefile.in (utils.o): Add dependency.
* remote.c (getpkt): Add support for run-length encoding.
GNUTARGET.
* putenv.c: Removed, conflicts with system declaration of
putenv on RS/6000 running AIX 3.2.5, and above change makes it
unnecessary.
* Makefile.in: Change accordingly.
* procfs.c (procfs_create_inferior): Change comment accordingly.
VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK.
* symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not
(CORE_ADDR)0, from target_link, since that is what it uses.
Process name at end, not during parsing (like we did before Kung's
change), so that -readnow and -mapped can appear anywhere.
Make text_relocation a local variable.
* config/i386/i386os9k.mt: Fix comment.
* Makefile.in (ALLDEPFILES): Add remote-os9k.c.
* os9kread.c: Put "comments" after #endif inside /* */.
* stabsread.h: Add os9k_stabs variable.
* stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol):
Set it.
* stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol
descriptor in global_symbols not local_symbols.
(read_type): If os9k_stabs, accept 'c', 'i', and 'b' type
descriptors.
(read_type): If os9k_stabs, accept function parameters after 'f'
type descriptor.
(read_array_type): If os9k_stabs, don't expect index type and
expect lower and upper to be separated by ',' not ';'.
(read_enum_type): If os9k_stabs, read a number before the first
enumeration constant.
(os9k_init_type_vector): New function.
(dbx_lookup_type): Call it when starting new type vector.
* config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION.
* (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol.
* os9kstab.c: Removed.
* Makefile.in: Update accordingly.
* objfiles.c (objfile_relocate_data): Removed.
* remote-os9k.c (rombug_wait): Call objfile_relocate
not objfile_relocate_data.
* objfiles.h, objfiles.c: Remove find_pc_objfile.
* remote-os9k.c (rombug_wait): Call find_pc_section not
find_pc_objfile.
* main.c (quit_command): Check inferior_pid; revert Kung change.
* remote-os9k.c (rombug_create_inferior): Set inferior_pid.
ChangeLog objfiles.c objfiles.h symfile.c target.c main.c
Makefile.in configure.in
Added Files:
os9kread.c os9kstab.c remote-os9k.c
* os9kread.c: New file to read os9000 style symbo table.
* os9kstab.c: new file to read os9000 style stabs.
* remote-os9k.c: remote protocol talking to os9000 rombug monitor.
* objfiles.c (find_pc_objfile): new function to search objfile
from pc.
* objfiles.c (objfile_relocate_data): new function to relocate
data symbols in symbol table.
* objfiles.h: Add two aux fields in struct objfile to handle
multiple symbol table files situation like in os9000.
* symfile.c: Change so 'symbol-file' command can handle multiple
files. Also call target_link() to get relocation infos.
* target.c (target_link): new function to get relocation info when
a symbol file is requested to load.
* main.c (quit_command): take out 'inferior_pid != 0' condition,
because in cross mode there's no inferior pid, bit they need to
be detached.
Makefile.in: add os9kread.c os9kstab.c and .o's.
configure.in: add i386os9k target.
config/i386/i386os9k.mt: new add.
config/i386/tm-i386os9k.h: new add.
ourselves instead of worrying about INSTALL_XFORM. This enables
users to override INSTALL_PROGRAM in the standard way.
* Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
depend on Makefile.in.
config/ns32k/ns32km3.mh: Define NAT_FILE.
* config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
(it was inconsistent and namespace-wrong) to NM_M3_H.
* m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
(m3_open): New function.
(m3_ops): Use it.
* TODO: Update Mach section.
* Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
