* ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): macro
BDM_BREAKPOINT already has braces around it, remove erroneous ones.
* ser-ocd.c (ocd_write): conditionalize on _WIN32 instead of
__CYGWIN32__
* config/powerpc/tm-ppc-eabi.h: remove BDM_NUM_REGS, BDM_REGMAP
* ppc-bdm.c: move BDM_NUM_REGS, BDM_REGMAP here from tm.h file,
fill in doc fields of bdm_ppc_ops.
(bdm_ppc_fetch_registers): don't ask for invalid registers such
as the MQ or floating point regs not present on ppc 8xx boards
(bdm_ppc_store_registers): don't write those same invalid registers
* config/i386/cygwin32.mh: stop including ocd.o ser-ocd.o
* config/powerpc/ppc-eabi.mt:
* config/powerpc/ppcle-eabi.mt:
* config/powerpc/ppc-sim.mt:
* config/powerpc/ppcle-sim.mt: include ser-ocd.o
(dll_do_command): New static variable if _WIN32.
(ocd_open): Set dll_do_command if _WIN32.
(ocd_write): Use dll_do_command rather than do_command.
* config/i386/cygwin32.mh (XDEPFILES): Remove libwigglers.a.
(BDM_DLLNAME, BDM_LIBNAME, BDM_DEFFILE): Don't define.
($(BDM_LIBNAME)): Remove target.
* wigglers.def: Remove.
* Makefile.in: add DLLTOOL = @DLLTOOL@, pass on DLLTOOL to
sub makes, change clean rule to also remove *.a to remove
libwigglers.a, in dependencies: add ppc-bdm.o ocd.o ser-ocd.o and
remove remote-wiggler.o
* configure.in: add DLLTOOL support
* configure: regenerate
* wigglers.def: new file for imports for wigglers.dll
* ser-ocd.c: new file which is layer between ocd.c and either the
wigglers.dll or the target box, only stub so far
* config/powerpc/ppc-eabi.mt: add ppc-bdm.o to TDEPFILES
* config/powerpc/ppc-sim.mt: add ppc-bdm.o to TDEPFILES
* config/i386/cygwin32.mh: add ocd.o ser-ocd.o libwigglers.a
to XDEPFILES, add rules to build libwigglers.a
checking in changes of Stu Grossman <grossman@cygnus.com>:
* remote-wiggler.c: delete
* ocd.c: new, was remote-wiggler.c
always include sys/types.h, include ocd.h, move WIGGLER
commands and many wiggler prototypes to ocd.h, make wiggler_desc
static, stop making local wiggler functions static,
define write_mem_command for wiggler_write_bytes
(wiggler_start_remote): stop hardcoding the target type,
instead set and use a target_type variable.
(wiggler_open): add new target_type and ops args
(wiggler_wait): now no longer takes pid and target_status as args,
stop trying to set target_status struct, remove BGND insn
checks
(read_bdm_registers): renamed to wiggler_read_bdm_registers
(wiggler_read_bdm_registers): numregs arg changed to reglen arg,
remove pktlen check, set reglen instead of numregs
(dump_all_bdm_regs): delete
(wiggler_fetch_registers): delete
(wiggler_prepare_to_store): now just an empty function
(wiggler_store_registers): delete
(wiggler_read_bdm_register): new
(wiggler_write_bdm_registers): new
(wiggler_write_bdm_register): new
(wiggler_write_bytes): use write_mem_command variable instead of
WIGGLER_WRITE_MEM
(get_packet): renamed to wiggler_get_packet, change refs throughout
(put_packet): renamed to wiggler_put_packet, change refs throughout
(wiggler_get_packet): add break to default case of switch,
change length of WIGGLER_GET_VERSION len to 10 from 4 to match
specs
(wiggler_mourn): unpush_target with current_ops, not &wiggler_ops
(flash_xfer_memory): delete
(noop_store_registers): new placeholder replacement for
target_store_registers() which prevents generic_load from trying to
set up the PC.
(bdm_update_flash_command): add store_registers_tmp variable,
make handling of wiggler_ops more generic -- define wiggler_ops
in a target-specific file instead (such as ppc-bdm.c in the case
of the ppc), use current_target to deal with registers again
making this file less target-specific.
(bdm_read_register_command): new
(_initialize_remote_wiggler): stop doing add_target (&wiggler_ops),
comment out add_cmd ("read-register", ...)
* ocd.h: new, contains common wiggler prototypes, command definitions
* ppc-bdm.c: file for ppc-specific OCD code, including target_ops
structure for ppc bdm
(bdm_ppc_open): new
(bdm_ppc_wait): new
(bdm_ppc_fetch_registers): new
(bdm_ppc_store_registers_: new
(_initialize_bdm_ppc): new
* config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines
whether CRLF_SOURCE_FILES is defined.
(open_source_file): Use OPEN_MODE with open and openp.
(print_source_lines): Use FDOPEN_MODE with fdopen. If
CRLF_SOURCE_FILES is defined, ignore \r characters.
(forward_search_command): Use FDOPEN_MODE with fdopen.
(reverse_search_command): Likewise.
* config/i386/xm-cygwin32.h (CRLF_SOURCE_FILES): Define.
(LSEEK_NOT_LINEAR): Don't define.
* procfs.c: Substantial (but incomplete) changes to support
sysv4.2mp procfs as implemented in UnixWare 2.1. The procinfo
struct now has substructs like struct flt_ctl instead of
just a fltset_t and has a ctl_fd, status_fd, as_fd, and
map_fd instead of a single fd. Non-sysv4.2mp procfs models
still have the structs and multiple fds, but don't use the
entire struct and the four fds all point to the same thing.
We use PROCFS_USE_READ_WRITE to decide whether to talk to
procfs with reads/writes or use ioctl instead. We use
HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has
multiple fds or not. PROC_NAME_FMT is split out into
CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT,
STATUS_PROC_NAME_FMT.
(procfs_notice_signals): now a necessary wrapper around
(notice_signals): which are the new guts for noticing signals
(open_proc_file): gets a new flag arg used in sysv4.2mp to
determine whether or not to attempt to open the ctl_fd.
(procfs_read_status): new local function, reads procfs status
(procfs_write_pcwstop): new local function, writes a PCWSTOP
(procfs_write_pckill): new local function, writes a PCKILL
(unconditionally_kill_inferior): remove signo since we now
just call procfs_write_pckill().
(procfs_xfer_memory): call lseek with SEEK_SET rather than 0
(proc_iterate_over_mappings): the whole function is ifdefed
on UNIXWARE to keep things readable.
Expanded the syscall_table to include new potential sysv4.2mp
members. Note that all ifdefs of UNIXWARE should be eliminated
if possible or renamed to describe what's being selected for a
bit better. Sysv4.2mp and IRIX both have SYS_sproc so the
IRIX specific code now also checks it's not UNIXWARE.
* config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T,
HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE
* config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to
"/debug/%d" as PROC_NAME_FMT used to be
New UnixWare 2.1 configuration
* config/i386/i386v42mp.mt: new
* config/i386/i386v42mp.mh: new
* config/i386/tm-i386v42mp.h: new
* config/i386/nm-i386v42mp.h: new
* configure.tgt: added new entries
* configure.host: added new entries
of 64-bit values on Windows.
* config/i386/xm-windows.h: Leave CC_HAS_LONG_LONG defined,
undefine PRINTF_HAS_LONG_LONG, so that 64-bit values will
be printed without loss of upper bits.
external forms may have different sizes. Don't assume that an
internal_nlist has the same layout as an external_nlist. Create
symbol for n_strx element so to hide specifics of nlist from
partial-stab.h.
* partial-stab.h: Don't reference dbxread symbols directly. Use
CUR_SYMBOL_STRX instead.
* config/i386/xm-windows.h: Define SIGQUIT and SIGTRAP.
* config/v850/tm-v850.h: Define PS_REGNUM and TARGET_V850 for
MSVC builds.
* mswin/gdbwin.c (reg_order): Define register order for V850.
* mswin/gui.cpp (CGuiApp::InitInstance): Define target name for
V850.
* mswin/regdoc.h: Define MAXREGS for V850.
SIGTRAMP_END.
* config/i386/tm-i386os9k.h (SIGTRAMP_START, SIGTRAMP_END):
Define with dummy pc arg.
* config/m68k/tm-nbsd.h: Ditto.
* doc/gdbint.texinfo: Document that SIGTRAMP_START and
SIGTRAMP_END are macros that take an single argument.
Thu Jul 25 19:41:31 1996 Fred Fish <fnf@cygnus.com>
for details about these changes. I was going to include the complete
entry in the checkin message but it was apparently so large it caused
cvs to dump core.
and MMALLOC_CHECK macros, and add comment indicating how host dependent
makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
to use it but to not do heap corruption checking.
* gdbserver/Makefile.in: Ditto.
* utils.c (init_malloc): Replace warning() use with direct call of
fprintf_unfiltered, since current_target has not yet been set and thus
we cannot use warning(). If we try to use mmcheck and it fails,
suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
defined. Other small mmalloc related cleanups.
* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
Remove obsolete defines.
* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
* config/rs6000/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix.mh (MMALLOC_DISABLE):
* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
* config/mips/mipsm3.mh (MMALLOC_DISABLE):
* config/mips/decstation.mh (MMALLOC_DISABLE):
* config/m88k/cxux.mh (MMALLOC_DISABLE):
* config/i386/i386mk.mh (MMALLOC_DISABLE):
* config/i386/i386m3.mh (MMALLOC_DISABLE):
* config/i386/i386gnu.mh (MMALLOC_DISABLE):
Use MMALLOC_CFLAGS instead.
* NEWS: Add Alpha Linux as a new native configuration.
* mdebugread.c (parse_symbol): When we find a malloc() symbol with
return type VOID, assume no debugging info is available for that
object file and patch the return value into VOID *. Otherwise,
operations requiring an implicit call to malloc() will fail.
* infrun.c (wait_for_inferior): The criterion to detect entering a
sigtramp handler is now: (a) the current pc is inside a sigtramp
handler, (b) the previous pc is not in a sigtramp handler, and (c)
the current stack pointer is "inner" than the old one. Condition
(c) is new to avoid mistaking a return from a signal handler into
sigtramp as a new sigtramp invocation.
* dcache.c (struct dcache_block): Declare addr as CORE_ADDR. An
int may not be big enough to hold an address.
(dcache_hit): Ditto.
(dcache_peek_byte): Fix indentation.
* configure.in (alpha-*-linux*): Add target.
* configure: Rebuild
* config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro.
(SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto.
(DYNAMIC_SIGTRAMP_OFFSET): Ditto.
(SIGCONTEXT_ADDR): Ditto.
(FRAME_PAST_SIGTRAMP_FRAME): Ditto.
* config/alpha/alpha-linux.mh: New file.
* config/alpha/alpha-linux.mt: Ditto.
* config/alpha/nm-linux.h: Ditto.
* config/alpha/tm-alphalinux.h: Ditto.
* config/alpha/xm-alphalinux.h: Ditto.
* config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h.
* config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to
xm-alphaosf.h.
* config/alpha/alpha-osf2.mh: Ditto.
* blockframe.c (find_pc_partial_function): Pass PC to
SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems
that detect sigtramp code via designated code sequences (as is the
case for Linux/Alpha, for example).
* config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END
to ignore new PC argument.
* config/m68k/tm-hp300bsd.h: Ditto.
* config/vax/tm-vax.h: Ditto.
* alpha-tdep.c (alpha_linux_sigtramp_offset): New function.
(alpha_osf_skip_sigtramp_frame): Ditto.
(push_sigtramp_desc): Ditto.
(alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract
sigcontext address from frame.
(alpha_saved_pc_after_call): When in sigtramp, use
alpha_frame_saved_pc() instead of read-register().
(after_prologue): When inside a dynamically generated sigtramp
function, there is no prologue, so return address of first
instruction.
(alpha_in_prologue): Fix typo in comment.
(find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine
whether we're inside a dynamicaly generated sigtramp function. If
so, create and push and appropriate procedure descriptor.
(alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain
the frame past a sigtramp frame (if the current frame is indeed a
sigtramp function).
(init_extra_frame_info): Don't read next frame register off of
stack-pointer when inside a dynamiccaly generated sigtramp.
(alpha_pop_frame): Also unlink and destroy procedure descriptors
created for dynamically generated sigtramp functions.
* alpha-nat.c: When compiling under Linux, include <asm/reg.h> and
<alpha/ptrace.h> instead of <machine/reg.h>
* configure: Regenerate.
From: Robert Lipe <robertl@dgii.com>
Add support for SCO OpenServer 5 (a.k.a. 3.2v5*) This
target is an SVR3.2 with COFF, ELF, and shared libes, but
no /proc.
* config/i386/i386sco5.mh: New file.
* config/i386/nm-i386sco5.h: New file.
here from config/i386/xm-i386mach.h, fix name.
* config/i386/nm-sun386.h: Ditto, from config/i386/xm-sun386.h.
* config/i386/nm-ptx4.h (CHILD_PREPARE_TO_STORE): Move to
here from config/i386/xm-ptx4.h.
* config/i386/nm-ptx4.h: Ditto, from config/i386/xm-ptx.h.
* config/i386/nm-symmetry.h: Ditto, from config/i386/xm-symmetry.h.
* config/m68k/nm-sun3.h: Ditto, from config/m68k/xm-sun3.h.
more housekeeping
Also check for gregset_t and fpregset_t types.
* configure: Regenerate.
* core-regset.c (sys/procfs.h): Only include if HAVE_SYS_PROCFS_H
is defined.
(fetch_core_registers): Turn into stub unless both HAVE_GREGSET_T
and HAVE_FPREGSET_T are defined. These changes allow systems
like linux that are migrating to /proc support to use a single
configuration for both new and old versions.
* config/i386/linux.mt: Note that this is now for both a.out and
ELF systems.
* config/i386/linux.mh (NATDEPFILES): Add solib.o, core-regset.o,
i386v4-nat.o
* config/i386/tm-linux.h (tm-sysv4.h): Include.
* config/i386/xm-linux.h (solib.h): Include
(SVR4_SHARED_LIBS): Define.
* i386v4-nat.c: Only compile if HAVE_SYS_PROCFS_H is defined.
(supply_gregset, fill_gregset): Compile if HAVE_GREGSET_T defined.
(supply_fpregset, fill_fpregset): Compile if HAVE_FPREGSET_T defined.
* gdbserver/low-linux.c: New file.
* remote.c (remote_read_bytes): Fix aborts on larger packets.
* config/i386/linux.mh (GDBSERVER_DEPFILES, GDBSERVER_LIBS):
Define.
* stabsread.c (define_symbol): If register value is too large,
tell what it is and what max is.
from NUM_REGS to get number of general registers that we care about.
Update copyright to 1996.
* config/i386/tm-i386.h (REGISTER_BYTES): Define in terms
of number of general regs and number of floating point regs.
Update copyright to 1996.
definitions.
(TARGET_BYTE_ORDER): Moved here from tm-i386v.h.
(IEEE_FLOAT): Moved here from tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Define default as 2.
(FUNCTION_START_OFFSET): Moved here from tm-i386v.h.
(SKIP_PROLOGUE): Moved here from tm-i386v.h.
(SAVED_PC_AFTER_CALL): Moved here from tm-i386v.h.
(INNER_THAN): Moved here from tm-i386v.h.
(BREAKPOINT): Moved here from tm-i386v.h.
(DECR_PC_AFTER_BREAK): Moved here from tm-i386v.h.
(ABOUT_TO_RETURN): Moved here from tm-i386v.h.
(REGISTER_SIZE): Moved here from tm-i386v.h.
(NUM_REGS): Moved here from tm-i386v.h.
(REGISTER_NAMES): Moved here from tm-i386v.h.
(EXTRACT_STRUCT_VALUE_ADDRESS): Moved here from tm-i386v.h.
(FP_REGNUM): Moved here from tm-i386v.h.
(SP_REGNUM): Moved here from tm-i386v.h.
(PC_REGNUM): Moved here from tm-i386v.h.
(PS_REGNUM): Moved here from tm-i386v.h.
(FP0_REGNUM): Moved here from tm-i386aix.h.
(FPC_REGNUM): Moved here from tm-sun386.h.
(REGISTER_BYTES): Moved here from tm-i386aix.h.
(REGISTER_BYTE): Moved here from tm-i386aix.h.
(REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
(MAX_REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
(REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
(MAX_REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
(EXTRACT_RETURN_VALUE): Moved here from tm-i386aix.h.
(STORE_RETURN_VALUE): Moved here from tm-i386aix.h.
(REGISTER_VIRTUAL_TYPE): Moved here from tm-i386v.h.
(STORE_STRUCT_RETURN): Moved here from tm-i386v.h.
(FRAME_CHAIN): Moved here from tm-i386v4.h.
(FRAMELESS_FUNCTION_INVOCATION): Moved here from tm-i386v4.h.
(FRAME_SAVED_PC): Moved here from tm-i386os9k.h
(FRAME_ARGS_ADDRESS): Moved here from tm-i386v.h.
(FRAME_LOCALS_ADDRESS): Moved here from tm-i386v.h.
(FRAME_NUM_ARGS): Moved here from tm-i386sun.h.
(FRAME_ARGS_SKIP): Moved here from tm-i386v.h.
(FRAME_FIND_SAVED_REGS): Moved here from tm-i386v.h.
(PUSH_DUMMY_FRAME): Moved here from tm-i386v.h.
(POP_FRAME): Moved here from tm-i386v.h.
(CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET,
CALL_DUMMY_BREAKPOINT_OFFSET, FIX_CALL_DUMMY): Moved here from
tm-i386v.h
(print_387_control_word, print_387_status_word): Declare prototypes.
(struct frame_info, struct frame_saved_regs): Forward decls for
prototypes.
(SP_ARG0): Moved here from tm-i386v.h.
* config/i386/tm-i386v.h:
(i386/tm-i386.h): Include.
(TARGET_BYTE_ORDER): Remove.
(IEEE_FLOAT): Remove.
(START_INFERIOR_TRAPS_EXPECTED): Undef before redefine to 4.
(FUNCTION_START_OFFSET): Remove.
(SKIP_PROLOGUE): Remove.
(i386_skip_prologue): Remove prototype.
(SAVED_PC_AFTER_CALL): Remove.
(INNER_THAN): Remove.
(BREAKPOINT): Remove.
(DECR_PC_AFTER_BREAK): Remove.
(ABOUT_TO_RETURN): Remove.
(REGISTER_SIZE): Remove.
(NUM_REGS): Undef before redefine to 16 (no FP support).
(REGISTER_NAMES): Undef before redefine.
(FP_REGNUM, SP_REGNUM, PC_REGNUM, PS_REGNUM): Remove.
(REGISTER_BYTES): Undef before redefine.
(REGISTER_BYTE): Undef before redefine.
(REGISTER_RAW_SIZE): Undef before redefine.
(REGISTER_VIRTUAL_SIZE): Undef before redefine.
(MAX_REGISTER_RAW_SIZE): Undef before redefine.
(MAX_REGISTER_VIRTUAL_SIZE): Undef before redefine.
(REGISTER_VIRTUAL_TYPE): Undef before redefine.
(STORE_STRUCT_RETURN): Undef before redefine.
(EXTRACT_RETURN_VALUE): Undef before redefine.
(STORE_RETURN_VALUE): Undef before redefine.
(EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
(FRAME_CHAIN): Undef before redefine.
(FRAMELESS_FUNCTION_INVOCATION): Undef before redefine.
(FRAME_SAVED_PC): Undef before redefine.
(FRAME_ARGS_ADDRESS): Remove.
(FRAME_LOCALS_ADDRESS): Remove.
(FRAME_NUM_ARGS): Undef before redefine.
(FRAME_ARGS_SKIP): Remove.
(FRAME_FIND_SAVED_REGS): Remove.
(PUSH_DUMMY_FRAME): Remove.
(POP_FRAME): Remove.
(CALL_DUMMY): Remove.
(CALL_DUMMY_LENGTH): Remove.
(CALL_DUMMY_START_OFFSET): Remove.
(CALL_DUMMY_BREAKPOINT_OFFSET): Remove
(FIX_CALL_DUMMY): Remove.
(print_387_control_word): Remove.
(print_387_status_word): Remove.
(SP_ARG0): Remove.
* config/i386/tm-symmetry.h:
(TM_SYMMETRY_H): Enclose file in test for define & define if needed.
(START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
(DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
or tm-i386v.h, #undef, and #define to 0.
(MAX_REGISTER_RAW_SIZE): Remove.
(FRAME_CHAIN): Remove.
(FRAMELESS_FUNCTION_INVOCATION): Remove.
(FRAME_SAVED_PC): Remove.
(print_387_control_word, print_387_status_word): Remove prototypes.
* config/i386/tm-ptx.h:
(TM_PTX_H): Enclose file in test for define & define if needed.
(START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
(DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
or tm-i386v.h, #undef, and #define to 0.
(SDB_REG_TO_REGNUM): Remove obsolete commented out define.
(print_387_control_word, print_387_status_word): Remove prototypes.
* config/i386/tm-linux.h:
(TM_LINUX_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
* config/i386/tm-i386v4.h:
(TM_I386V4_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(FRAME_CHAIN): Moved to tm-i386.h.
(FRAMELESS_FUNCTION_INVOCATION): Moved to tm-i386.h.
(FRAME_SAVED_PC): Remove.
(sigtramp_saved_pc): Define as i386v4_sigtramp_saved_pc.
(FRAME_NUM_ARGS): Remove.
* config/i386/tm-i386os9k.h:
(TM_I386OS9K_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(NUM_REGS): Undefine before redefining.
(FRAME_CHAIN): Remove.
(FRAMELESS_FUNCTION_INVOCATION): Remove.
(FRAME_SAVED_PC): Move to tm-i386.h.
* config/i386/tm-i386nw.h:
(TM_I386NW_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
* config/i386/tm-i386bsd.h:
(TM_I386BSD_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(FRAMELESS_FUNCTION_INVOCATION): Remove.
(FRAME_SAVED_PC): Remove.
* config/i386/tm-i386aix.h:
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(FP_REGNUM): Remove.
(SP_REGNUM): Remove.
(PC_REGNUM): Remove.
(PS_REGNUM): Remove.
(FP0_REGNUM): Moved to tm-i386.h.
(NUM_REGS): Remove.
(REGISTER_NAMES): Remove.
(REGISTER_BYTES): Moved to tm-i386.h.
(REGISTER_BYTE): Moved to tm-i386.h.
(REGISTER_RAW_SIZE): Moved to tm-i386.h.
(MAX_REGISTER_RAW_SIZE): Moved to tm-i386.h.
(REGISTER_VIRTUAL_SIZE): Moved to tm-i386.h.
(REGISTER_VIRTUAL_TYPE): Removed.
(EXTRACT_RETURN_VALUE): Moved to tm-i386.h.
(STORE_RETURN_VALUE): Moved to tm-i386.h.
* config/i386/tm-sun386.h:
(TM_SUN386_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include.
(TARGET_BYTE_ORDER): Remove.
(FUNCTION_START_OFFSET): Remove.
(SKIP_PROLOGUE): Remove.
(SAVED_PC_AFTER_CALL): Remove.
(INNER_THAN): Remove.
(BREAKPOINT): Remove.
(DECR_PC_AFTER_BREAK): Remove.
(ABOUT_TO_RETURN): Remove.
(REGISTER_SIZE): Remove.
(NUM_REGS): Undefine before defining.
(REGISTER_NAMES): Undefine before redefining.
(REGISTER_BYTES): Undefine before redefining.
(REGISTER_BYTE): Undefine before defining.
(FP_REGNUM): Undefine before defining.
(PC_REGNUM): Undefine before defining.
(FPC_REGNUM): Undefine before defining.
(REGISTER_RAW_SIZE): Undefine before defining.
(FRAME_CHAIN): Undefine before defining.
(FRAMELESS_FUNCTION_INVOCATION): Undefine before defining.
(FRAME_SAVED_PC): Undefine before defining.
(FRAME_NUM_ARGS): Moved to tm-i386.h.
(MAX_REGISTER_RAW_SIZE): Remove.
(MAX_REGISTER_VIRTUAL_SIZE): Remove.
(STORE_STRUCT_RETURN): Remove.
(EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
(FRAME_ARGS_ADDRESS): Remove.
(FRAME_LOCALS_ADDRESS): Remove.
(FRAME_NUM_ARGS): Undefine before defining.
(FRAME_ARGS_SKIP): Remove.
(FRAME_FIND_SAVED_REGS): Remove.
(PUSH_DUMMY_FRAME): Remove.
(POP_FRAME): Remove.
(CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET): Remove.
(struct frame_info, struct frame_saved_regs): Remove forward decls
for prototypes.
* config/i386/tm-i386lynx.h (i386/tm-i386.h): Include instead of
tm-i386v.h.
* config/i386/tm-i386m3.h (i386/tm-i386.h): Include instead of
tm-i386v.h.
* defs.h: Test on name __WIN32__ rather than WIN32.
* inflow.c (new_tty): Likewise
* terminal.h: Likewise.
* utils.c (initialize_utils): Likewise.
* win32-nat.c (child_create_inferiror): Print error code when failing.
* config/i386/win32.mh (XM_CLIBS): Need -lkernel32.
* callback.[ch]: New files.
* remote-rdp.c: Support for the ARM RDP monitor.
* Makefile: Update.
* arm-tdep.c (arm_othernames): New.
(_initialize_arm_tdep): install 'othernames' command.
(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
* configure.in: Check for termios.h, termio.h and sgtty.h.
(i[345]86-*-win32*): New host.
* configure: Regenerated.
* inflow.c: Clean up inclusions.
* main.c (main): Check for WINGDB, not WIN32.
* printcmd.c (do_examine): Put QUIT test in loop.
* remote-hms.c (e7000_load): Delete.
(hms_ops): Point to generic_load instead.
* remote-hms.c (hms_ops): Point to generic_load.
* remote-sim.c (sim_callback_write_stdout): Becomes
gdbsim_write_stdout.
(gdbsim_load): Call generic_load.
* remote-utils.c (gr_load_image): Delete.
* ser-unix.c (terminal.h): Include instead of havig
own #if tree.
(hardwire_flush_input): Reset input buffer too.
* source.c (openp): If WIN32 then open file in binary mode.
* terminal.h: Configure IO mechanism using autoconf defines if available and
not overriden.
* utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check.
* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o
* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE.
(ADDR_BITS_REMOVE): New.
(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
(INST_xx): New
(FRAME_FIND_SAVED_REGS): Pass the right argument.
(arm_get_next_pc): Declare.
* mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
error message to work with pre-ansi compilers.
(monitor_load_srec): reduced length of s-records from 128 to 32
bytes so download is more reliable with the rom68k monitor.
* rom68k-rom.c: Added trailing space to prompt string.
* config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
* config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
Removed.
* defs.h, config/{xm-lynx.h, xm-nbsd.h},
config/i386/{xm-i386bsd.h, xm-linux.h},
config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
(PSIGNAL_IN_SIGNAL_H): Removed.
